Powered Instruments - Veterinary Instrumentation · powered instruments f or small bone surgery ......
Transcript of Powered Instruments - Veterinary Instrumentation · powered instruments f or small bone surgery ......
Powered Instrumentsf o r s m a l l b o n e s u r g e r y
powered instrumentsf o r s m a l l b o n e s u r g e r y
CONTENTSCorded electric
MCZ modular handpiece ...........................................................3
MCZ controller ............................................................................4
Air powered
MPZ MultiDriveTM modular pistol grip handpieces ...............5
MCZ and MPZ Modular attachments .....................................6
EPV ErgoPlusTM modular straight handpieces .........................7
EPV Modular attachments ..........................................................8
D30 MicroDriveTM dedicated handpiece system ...................9
Ancillary equipment
Drive adaptors .............................................................................10
Air hoses .......................................................................................11
All products in this catalogue are backed by the De Soutter Medical no nonsense warranty.All instruments shown in this catalogue are CE marked.
MODULAR SYSTEMWide range of attachments with provenquick change lockingmechanism.
MCZ CORDED ELECTRICUser programmable settings are available throughPS-450 power supply.See pages 3 and 4.
EPV & MPZ AIR POWERED SYSTEMSEPV pencil grip range offers choice of lever orfoot control. See pages 5 to 8.
The new De Soutter Medical Small Bone range sets the standard for precision small bonesurgery. High power to weight ratio, superb ergonomic design and a comprehensive rangeof quick change attachments, make these systems effortless to use.
Air or electric - the choice is yours
MCZ-450 Handpiecefitted with A.O. quick release drill attachment.
See page 6 for full range of drilling, reaming and sawingattachments.
Simple push-in/pull-out cable connection.
Sterilisation Case - Order code 14390Accommodates MCZ handpiece, cable and mostpopular attachments
Modular - corded direct power
MCZ-450 HANDPIECE SPECIFICATION
Order code
1284004
Speed
0 - 1100 rpm
Cannulation
4.1 mm
Power supply
4 metre cable from PS-450 power supply
MCZMultiDriveTM
Type
Trigger control
3 -
4
PS-450 SPECIFICATION
Order code 12840
Input - 230Vac, 120Vac and 100Vac
Mains power cord sets - 3m longUK Order code 8290Euro Order code 8300US/Canada Order code 8310Australia/N. Zealand Order code 8320Swiss Order code 14700Please specify option required
Handpiece cable - 4 m longOrder code 12850
Typical fuction programming sequence forMCZ with reciprocating saw attachment
PS-450 programmable power supply
• Dual output socketsenable two handpieces to be connected and used simultaneously.
• Handpiece settings and functions can be programmed into powersupply and saved under “user setting” for futureuse.
• Clear display shows speed,direction and other menudriven instrument settings.
• Up to five user settingswith five programmes persetting.
• Forward, reverse and oscillating modes availablefrom handpiece trigger or power supply settings.
• Small footprint 310 mm x 290 mm.
Modular - air operated pistol grip
MPZMultiDriveTM
HANDPIECE SPECIFICATION
Order code
226414
Type code
MPZ-450
Type
Trigger control
Speed
0 - 1100 rpm
Cannulation
4.1 mm
Operating pressure
6 - 7 bar
Sterilisation Case - Order code 9630Accommodates MPZ and EPV handpieces,hose and their most popular attachmentsSterile packed De Soutter Medical
StericutTM drills, burs and blades.See references on opposite page
MPZ-450 HandpieceFitted with sagittal saw attachment
MPZ-450 HandpieceFitted with quick release drill attachment
Handpiece Wash Cap Order code 9950
Wash Assist air hose system. See page 11 for details.
5 -
6
3.1
4.1
2.4
4.1
2.0
4.1
4.1
4.1
-
-
-
0.6 - 1.81.8 - 3.2
0 - 4 mm (5/32”) Jacobs chuck
0 - 6.35 mm (1/4”) Jacobs chuck
0 - 3.2 mm (1/8”) keyless chuck
0.8 - 6.35 mm (1/4”) keyless chuck
A.O. SynthesTM/ASIF quick release
0 - 6.35 mm (1/4”) Jacobs chuck
A.O Synthes/ASIF/PROTEK
Hudson/Zimmer
Sagittal sawSee saw blade data sheets8.20, 8.21, 8.22, 8.23, 8.24
Sagittal saw - quick releaseSee saw blade data sheets8.40, 8.41, 8.42, 8.43
Reciprocating sawSee saw blade data sheet 9.007
Wire driver - gold nosePin driver - silver nose
See wire and guides data sheet 9.06
DZ-450
DZ-450
DZ-450
DZ-450
DZ-450
RZ-450
RZ-450
RZ-450
SZ-450
NZ-450
CZ-450
WZ-450PZ-450
14110
14240
14130
14120
14140
14160
14160
14150
14170
14210
14230
14220
1426014270
0 - 1000
0 - 1000
0 - 1000
0 - 1000
0 - 1000
0 - 300
0 - 300
0 - 300
0 - 18000cycles/min
0 - 21000cycles/min
0 - 12000cycles/min
0 - 10000 - 1000
Order code
Chuck Description Type Speedrpm
Cannulationmm
Drilling attachments
Reaming attachments
Sawing attachments
See Accessory Catalogue No. 162 for range of drill bits & taps.
See page 10 for other chuck drive options.
See Accessory Catalogue No. 162 for acetabular reamer shafts and shells
Wire and pin drivers
All attachments on this page are interchangeable between MPZ air operated handpieces and MCZ corded electric handpieces.
HANDPIECE SPECIFICATION
Order code
225004
225224
Type code
EPV-200
EPV-201
Type
Lever control
Foot control
Speed
0 - 35000 rpm
0 - 35000 rpm
Operating pressure
6 -7 bar
6 - 7 bar
Modular - air operated pencil grip
EPVErgoPlusTM
Sterilisation Case - Order code 9630Accommodates EPV and MPZ handpieces,hose and their most popular attachments
Foot pedal control FV-201.Order code 9960For use with EPV-201 handpiece.Supply hose 3 metres long with MA7 probe. Other probe socket ends available.
EPV-200 HandpieceLever control. Fitted with sagittal saw attachment
EPV-201 HandpieceFoot control. Fitted with bur chuck attachment
Wash Assist air hose system. See page 11 for details.
Handpiece Wash Cap Order code 9950
7 -
8
0 - 1300
0 - 1500
0 - 5000
0 - 35000
-
0 - 350000 - 35000
-
0 - 17000cycles/min
0 - 33000cycles/min
0 - 30000cycles/min
0 - 30000cycles/min
0 - 24000cycles/min
0 - 4 mm (5/32”) Jacobs chuck
Offset A.O. chuckcannulation diameter 2.2 mm
Quick release to ISO 6360
Accepts all 2.38 mm (3/32”) burs
E - fitting adaptor.Used with AV-200 angle rotary bur.
Standard length 200 angle rotary bur1:1Extended length 200 angle rotary bur1:1
Used with E-fitting adaptor 9870Accepts all 2.38 mm (3/32”) burs
E - fitting adaptor for dermatome.Used with heads GS-102 and GS-103.See Catalogue No. 120
2.5 mm strokeSee data sheet 9.07 for saw blade range
40 oscillating arcSee data sheets 8.30 and 8.31 for saw blade range
4.50 oscillating arcSee data sheets 8.20 to 8.24 for saw blade range
Micro sagittal saw - quick releaseSee data sheets 8.41 to 8.43 for saw blade range
Wrench less blade chuckingSee data sheet 8.32 for saw blade range
DV-200
DV-220
QV-200
BV-200
EV-200
AV-200AV-200
EV-250
CV-200
MV-200
SV-200
NV-200
OV-200
9850
12790
9790
9800
9870
97709780
9880
9840
9820
9890
12560
9830
Order code
Chuck Description Type Speedrpm
Drill attachments
Rotary bur attachments
Reciprocating saw attachment
Sagittal saw attachments
Oscillating saw attachment
See Accessory Catalogue No. 162 for range of drill bits & taps.See data sheets No. 9.01 - 9.04. for range of rotary burs.
Long bur guard Part no. 9910
Extra long bur guard Part no. 9920
SPECIFICATION
Order code
219664219774219884219994226004
Type code
D30-100D32-100D33-100D34-100D36-100
Type
DrillSagittal sawOscillating sawReciprocating sawWire driver
Speed
0 - 30000 rpm25000 cycles/min.25000 cycles/min.18000 cycles/min.2000 rpm
Operating pressure
6 - 7 bar6 - 7 bar6 - 7 bar6 - 7 bar6 - 7 bar
Accessories
See data sheet 9.01 to 9.04 for burs and drillsSee data sheet 9.08 and 9.09 for saw bladesSee data sheet 9.06 for saw bladesSee data sheet 9.07 for blades and raspssee data sheet 9.05 for K-wires
Dedicated - air operated
D30MicroDriveTM
Sterilisation Case Order code 7540Accommodates powered instrument,hose andaccessories.
Extra long bur guardOrder code 2240
Long bur guardOrder code 2230
D30-100Drill
D32-100Sagittal saw
D33-100Oscillating saw
D34-100Reciprocating saw
D36-100Wire driver
Wash Assist hose system. See opposite for details.
Handpiece Wash Cap Order code 8110
9 -
10
Replacement rubber strap Part No. 632393
The Wash Assist co-axial hose system is recommended where machine washing of air hoses is demanded. Byreleasing the probe end from hose, which is retained on the hose via the rubber strap, the two hose ends can bejoined and sealed prior to machine washing.
Instrument
EPV, MPZD30
EPV ,MPZD30
EPV, MPZD30
EPV, MPZD30
EPV, MPZD30
EPV, MPZD30
EPV, MPZD30
EPV, MPZD30
EPV, MPZD30
EPV, MPZD30
3 metre hose - Part no.
1330013600
1331013610
1332013620
1333013630
1334013640
1335013650
1336013660
1338013680
1337013670
1339013690
4 metre hose - Part no.
1340013700
1341013710
1342013720
1343013730
1344013740
1345013750
1346013760
1348013780
1347013770
1349013790
5 metre hose - Part no.
1350013800
1351013810
1352013820
1353013830
1354013840
1355013850
1356013860
1358013880
1357013870
1359013890
* Made to special order
Probe
MA7 Schrader
A.O.
AGA Inst.
Draeger
Heyer *
Air Liquide *
DIN *
AGA Air *
Flowtech *
NP05 *
‘Wash-assist’ co-axial air hoses
6.35 mm (1/4'') Jacobs chuck4.0 mm Jacobs Chuck - fits A.O. drill chuck
Zimmer chuck
Harris chuck
Hudson chuck
Trinkle chuck
A.O. Synthes quick release drill chuck
A.O. Synthes/Protek reamer chuck
DIN58809 reamer chuck
DHS
A.O. Reamer Part No.
7970-
6590
6550
6560
6580
7980
-
6570
7770
A.O.Drill Part No.
-6270
-
-
-
-
-
-
-
-
Hudson Part No.
5440-
5450
5460
-
7910
5470
5480
5490
11260
Drive adaptors for use with MPZ and MCZ attachments
Input drive Output drive
GENERAL ACCESSORIES
De Soutter Medical LimitedRiver Park, Billet Lane, Berkhamsted, Hertfordshire, HP4 1HL. UKtel: +44 0 1442 860300 fax: +44 0 1442 860333email: [email protected] web: www.de-soutter.compublication no. 170-1
The De Soutter HST-100 instrument system is designed for delicate bonedissection.The slim perfectly balanced handpiece enables the surgeon to perform the most demanding surgical procedures with complete confidence.
HST high speed system
Please ask for catalogue no. 164