GT18 4-2004

SPECIFICATIONS

Stanley Hydraulic Tools3810 S.E. Naef RoadMilwaukie, Oregon 97267Tel 503•659•5660Fax 503•652•1780

Visit our website at www.stanley-hydraulic-tools.com

Power Units

Features and BenefitsThe new generation Stanley GT18 Power Unit is the latest in construc-tion site hydraulic power for tools. The GT18 conforms to the Hydraulic Tools Manufacturers Association (HTMA) Type 1 and Type 2 tool circuit recom-mended performance. It will deliver 5 gpm or 8 gpm at pressures up to 2000 psi with heat rejection capacity exceeding the HTMA recommendation of 5 hp.

Significant features of the GT18 are:

• Computerized, electronic throttle control is standard on all models. The control allows for selection of constant engine speed or au-tomatic speed. Automatic speed increases engine speed from idle when it senses tool working demand. When there is no tool working demand, engine speed

GT18

is returned to idle. The automatic speed mode provides lower fuel use and less noise.

• All electric control system with rotary switches.

• All components in the GT18 are assembled for easy routine ser-vicing. The upper frame can be removed for more serious servic-ing.

• A quartz hourmeter in the control panel records engine run time.

• The hydraulic pump is mounted directly to the engine eliminating any misalignment and ensuring long life of the drive coupling.

• An in-tank hydraulic filter continu-ously cleans the hydraulic fluid and assures that refill fluid passes

through the filter for a clean refill.

• A 35-Ah sealed, non-spillable, no-maintenance battery is located inside a covered compartment.

• Moving the GT18 around is made easy with a lift-and-latch handle.

• Both engine models (Briggs or Honda) have pressure lubrication systems with a pressure sensing switch that will shut down the en-gine if the engine oil level is too low.

• Some GT18 models are available with 110 vac, 60 Hz electric power provided by a Briggs & Stratton PowerLink inverter system. This system will deliver 1000 watts, continuous and 1500 watts in-termittent power through GFCI receptacles.

ITEM U.S.A. METRIC

OUTPUT CAPACITY 5 or 8 gpm 20 or 30 lpm

PRESSURE 2000 psi 140 bar

CIRCUIT TYPE Open Center

HYDRAULIC RESERVOIR CAPACITY 3 gallons 11 liters

FUEL TANK CAPACITY 7 gallons 26.5 liters

WEIGHT (WET) 330 lbs 150 kg

LENGTH 35 in. 89 cm

WIDTH 21/5 in. 54.6 cm

HEIGHT 29 in. 73.7 cm

ENGINES Briggs & Stratton 18 hp Vanguard Honda 20 hp OHV

Stanley Hydraulic Tools3810 S.E. Naef RoadMilwaukie, Oregon 97267Tel 503•659•5660Fax 503•652•1780

All Stanley Hydraulic tools, parts, accessories and allied equipment are subject to design improvements, specification and price changes at any time without notice and with no obligation to units already sold. Weights, dimensions and operating specifications listed herein are subject to change without notice. Where specifications are critical to your applications, please consult Stanley Hydraulic Tools.

Stanley Hydraulic Tools and their as-sociated parts are warranted against defects in materials and workmanship for a period of twelve months from the date of purchase. Stanley Hydraulic Tools reserves the right to repair or replace only those parts which prove to have been defective at the time of purchase. This warranty becomes void if maximum flow and pressure ratings are exceeded.

Visit our website at www.stanley-hydraulic-tools.com

ACCESSORIES

ORDERING INFORMATION WARRANTY

ORDER NO. DESCRIPTION

GT18B02 8 gpm, Briggs & Stratton 18 hp

GT18B03 8 gpm, Briggs & Stratton 18 hp, Powerlink 110 vac

GT18B05 8 gpm, Briggs & Stratton 18 hp, Powerlink 110 vac, 12 vdc

GT18H02 8 gpm, Honda 20 hp

GT18H04 8 gpm, Honda, 12 vdc

ORDER NO. DESCRIPTION

31848 Dual Hose, 50 ft x 1/2 in., w/couplers

31972 Dual Hose, 25 ft x 1/2 in., w/couplers

58633 Twinned Hose, 25 ft x 1/2 in., w/couplers

58634 Twinned Hose, 50 ft x 1/2 in., w/couplers

13360 Hose Basket Kit

52721 High Altitude (0-6000 ft) Carburetor Jet Kit for Honda

52722 High Altitude (6000-8000 ft) Carburetor Jet Kit for Honda

33212 Weather Cover

MAIN FEATURES

GTR Hydraulic Power Units

OUTPUT CAPACITY 2ea. 5gpm/1ea.10gpm 2ea.20lpm/1ea.40lpm

PRESSURE 2000 psi 140 bar

SPECIFICATIONS

ITEM U.S.A. METRIC

CIRCUIT TYPE Open CenterHyd.Tank Cap. 3 gallons 11 litersFUEL TANK CAPACITY 7 gallons 26.5 liters

WEIGHT (WET) 330 lbs 150 kg

WIDTH 21/5 in. 54.6 cmLENGTH 35 in. 89 cm

HEIGHT 29 in. 73.7 cmENGINES Briggs & Stratton 18 hp Vanguard / Honda 20 hp OHV

CONNECTOR HTMA Flush Faced Coupler

The new generation Stanley GTR Power Unit is the latest in construction site hydraulic power for tools. TheGTR conforms to the Hydraulic Tools Manufacturers Association (HTMA) Type 1 and Type 2 tool circuitrecommended performance. It will deliver 5 gpm or 8 gpm at pressures up to 2000 psi with heat rejectioncapacity exceeding the HTMA recommendation of 5 hp.

Significant features of the GTR are:

Computerized, electronic throttle control is standard on all models. The control allows for selection ofconstant engine speed or automatic speed. Automatic speed increases engine speed from idle when it senses tool working demand. When there is no tool working demand, engine speed is returned to idle. The automatic speed mode provides lower fuel use and less noise.All electric control system with rotary switches.All components in the GTR are assembled for easy routine servicing. The upper frame can be removed for more serious servicing.A quartz hourmeter in the control panel records engine run time.The hydraulic pump is mounted directly to the engine eliminating any misalignment and ensuring longlife of the drive coupling.An in-tank hydraulic filter continuously cleans the hydraulic fluid and assures that refill fluid passes through the filter for a clean refill.A 35-Ah sealed, non-spillable, no-maintenance battery is located inside a covered compartment. Moving the GTR around is made easy with a lift-and-latch handle.Both engine models (Briggs or Honda) have pressure lubrication systems with a pressure sensing switch that will shut down the engine if the engine oil level is too low.

Stanleyrailroadproducts

Stanley products are available to suit many of the world’s railwaystandards. For further details, please contact your distributor.

Ordering Information

WHERE TO ORDER

+1 503 659 5660 +1 503 652 1780 www.stanleyrailroadproducts.com

Stanley Railroad Products 3810 SE Naef Rd. Milwaukie, Oregon 97267 USA

DISTRIBUTOR DETAILS

Model Number Description

GTR10B02 Single Circuit Briggs& Stratton18hp w/ wheelsGTR20B02 Dual Circuit Briggs & Stratton 18hp w/ wheelsGTR20B06 Skid Mount Dual Circuit Briggs & Stratton 18 hp No WheelsGTR20H02 Dual Circuit Honda 20-hp w/ wheelsHPR20271D Dual Circuit Duetz/Ruggerini 16-hp Diesel w/ wheels

Note: All Power Units (except HPR20271D)listed above include auto throttle and electric hydraulic controls.

Accessories

Model Number Description31848 Dual Hose, 50 ft x 1/2 in., w/couplers31972 Dual Hose, 25 ft x 1/2 in., w/couplers58633 Twinned Hose, 25 ft x 1/2 in., w/couplers58634 Twinned Hose, 50 ft x 1/2 in., w/couplers13360 Hose Basket Kit52721 High Altitude (0-6000 ft) Carburetor Jet Kit for Honda52722 High Altitude (6000-8000 ft) Carburetor Jet Kit for Honda33212 Weather Cover

HP1/HPR Compact

Power Units

OPERATION AND PERFORMANCE

HP1 COMPACT HPR

ITEM U.S.A. METRIC U.S.A. METRIC

Output (2) 5 gpm @ (2) 20 lpm @5 or 8 gpm 20 or 30 lpm 2000 psi circuits 140 bar circuit@ 2000 psi @ 140 bar (1) 10 gpm @ (1) 38 lpm @

2000 psi circuit 140 bar circuit

Length 35.5 in. 90.17 cm 35.5 in. 90.17 cm

Width 23.25 in. 59.06 cm 23.25 in. 59.06 cm

Height 29 in. 74 cm 29 in. 74 cm

Weight (less fuel) 276 lbs 125 kg 286 lbs 130 kg

Fuel Consumption 1.3 gph 4 lph 1.3 gph 4 lph

Engine Lube System Pressure Lube/Low Pressure Lube/Low Engine Oil Shutoff Engine Oil Shutdown

Running Gear 12 in. Wheels 31 cm Wheels 12 in. Wheels 31 cm WheelsRetractable Retractable Retractable RetractableHandles Handles Handles Handles

Stanley's compact power units featurethe most efficient hydraulic circuits avail-able in a portable power unit today.

Built to meet the tough HTMA standards.HTMA standards so they’ll provide sure

Equipped with a high-speed blower andlarge air-to-oil cooler, our power unitsprovide a source for clean and coolhydraulic power under the toughestoperating conditions.

All models feature either the powerfulBriggs & Stratton Vanguard OHVV-Twin, or Honda OHV GX620 engine.These high-torque engines are fuel effi-cient, have lower exhaust emissions, yetrun quieter than most engines their size.

These power units are easy to service too– both the engine and the hydraulic spin-on filters are a snap to change. A largereadily available commercial battery isfully enclosed in a battery box.

Fuel Tank Capacity 4.2 gal. 16 ltr 4.2 gal. 16 ltr

Hydraulic Reservoir Capacity 2.7 gal. 10 ltr 2.7 gal. 10 ltr

Engine 18 hp Vanguard IC V-Twin (OHV)

Stanley Features

• Rugged Side HandlesRun the entire length of the unit on both sides for easy lifting and protection.

• Automatic Throttle MechanismProvides automatic throttling whenthe tool is engaged, and return to idlewhen disengaged.

• Sealed No-Maintenance BatteryThe 35-Ah battery is sealed, non-spill-able and requires no maintenance.

• Fiberglass Pack Muffler

Quiet operation – only 85 db duringnormal operation.

P/N 14530 3/02

• Low Oil Pressure ShutoffA standard feature to protect theengine from low lubrication conditions.

• Swing Away Lifting Eye

Makes lifting quick and easy usingoverhead lifting devices.

20 hp Honda (OHV)

Equipped with a high-speed blower andlarge air-to-oil cooler, our power units

ACCESSORIES

ORDER NO. DESCRIPTION FLOW PRESSURE AUTO WHEELS &gpm / lpm psi / bar THROTTLE HANDLES

HP18264 Honda OHV GX620 20 hp 8 / 30 2000 / 140 yes yes

HP18294 Briggs & Stratton Vanguard 18 hp 8 / 30 2000 / 140 yes yes

HP1829401 Briggs & Stratton Vanguard 18 hp, CE 8 / 30 2000 / 140 yes yes

HP18299* Briggs & Stratton Vanguard 18 hp 8 / 30 2000 / 140 yes yes

HPR10293 Briggs & Stratton Vanguard 18 hp 5-10 / 20-38 2000 / 140 no yes

HPR20260 Honda OHV GX620 20 hp 2x5 or 1x10 / 2x20 or 1x38 2000 / 140 no no

HPR20261 Honda OHV GX620 20 hp 2x5 or 1x10 / 2x20 or 1x38 2000 / 140 no yes

HPR20290 Briggs & Stratton Vanguard 18 hp 5-10 / 20-38 2000 / 140 no no

HPR20294 Briggs & Stratton Vanguard 18 hp 2x5 or 1x10 / 2x20 or 1x38 2000 / 140 yes yes

HPR2029401 Briggs & Stratton Vanguard 18 hp, CE 2x5 or 1x10 / 2x20 or 1x38 2000 / 140 yes yes

All models feature electric start

* Includes Hose Basket

������������� �������������������� ���������������������������� ��!� �! ���"#� ��!� �!����

All Stanley Hydraulic Tools, parts, accessories and allied equipment are subject to design improvements, specification and price changes at any time without notice and with noobligation to units already sold. Weights, dimensions and operating specifications listed herein are subject to change without notice. Where specifications are critical to yourapplications, please consult Stanley Hydraulic Tools.

ORDERING INFORMATION

PART NO. DESCRIPTION

13360 Hose Basket Conversion Kit (HP1, HPR)

33212 Weather Cover (HP18294)

32320 High Altitude Jet Kit (Briggs & Stratton)

28705 Rail Wheel Kit (HPR)

29548 Rubber Tire Kit (HPR20260, HPR20290)

ACCESSORIES

Dual Circuit Power Unitshown with Track WheelKit and Rubber Tire Kit.

WARRANTY

Stanley Hydraulic Tools and their associatedparts are warranted against defects in materi-als and workmanship for a period of twelvemonths from the date of purchase. StanleyHydraulic Tools reserves the right to repair orreplace only those parts which prove to havebeen defective at the time of purchase. Thiswarranty becomes void if maximum flow andpressure ratings are exceeded.