Power transmission belts selector

BANDO

Power transmission belts selectorwe transmit power across space

REVISED 9

T-T003006-E

�

Since Bando's inception in 1906, we have pursued aggressive development policies in the power transmission belts and systems fields. Our highly capable staff develops power transmission belts as well as power transmission systems to meet the unique requirements of various types of equipment and engines. Their work contributes greatly to the emerging miniaturization technology responsible for making machines precise, smaller, lighter and more efficient.

Global Network

In 1969, BANDO established overseas liaison offices in America and Europe. In the 1980’s

we began strengthening our globalization efforts in Asia. Now, in �1st century, we have grown

into a company with more than 10 sales and/or manufacturing facilities around the world. The

collaboration of these companies forms the foundation of our global network meeting the wider

needs of automobile manufactures and office automation appliance manufactures in response to

their overseas expansion.

More importantly appliance, we will not only focus its efforts on establishing overseas facilities,

but also on training employees who can actively participate in these overseas activities, training

local associates and contributing to communities abroad.

�

Contents

PageBANDO Power Transmission Belts Table (Industrial / Automotive) ··································································4~5Selection Table for BANDO Power Transmission Belts ····················································································6~9

=SYNCHRONOUS BELTS=King Power Synchronous Belts (KPS �) ···········································································································10High Performance STS Belts (HP-STS) ············································································································11Long Synchronous / STS Belts (LSB-R)············································································································1�Bancollan Long Synchronous / STS Belts (LSB-U) ···························································································1�Synchronous Belts·······································································································································14~15Super Torque Synchronous Belts (STS) ······································································································16~17Bancollan Double Sided Synchronous / STS Belts ···························································································18Double Sided Synchronous / STS Belts ············································································································19HTS Belts ··························································································································································�0Bancollan Synchronous / STS Belts ············································································································�1~��Bancollan Synchronous Belts TN-type ··············································································································��

=V BELTS=Fractional H.P. V Belts (FHP) AND MULTIPLE V BELTS ·············································································�4~�5AGRICULTURAL V BELTS RED S � ···············································································································�6AGRICULTURAL V BELTS W800 ······················································································································�7Double V Belts ···················································································································································�8Power Ace ···················································································································································�9~�0Narrow V Belts SP-type ·····································································································································�1Variable Speed Belts ·········································································································································��Bancollan V Belts (VC Type) ······························································································································��Bancollan V Belts (DC Type)······························································································································��Banflex ·······························································································································································�4Bancord V Belts ·················································································································································41

=BANDED BELTS=Power Scrum ···············································································································································�6~�7Banflex Scrum ···················································································································································�5

=V RIBBED BELTS=PolyBanrope ······················································································································································�8Bancollan PolyBanrope ·····································································································································�9

=ROUND BELTS=Bancollan Round Belts (Seamless type) ···········································································································40Bancord Round Belts (Openend type)···············································································································41

=FLAT BELTS=Bancollan Cordless Flat Belts (Seamless type)·································································································41PS Belts ·······················································································································································4�~4�

=AUTOMOTIVE POWER TRANSMISSION BELTS=Wrapped Type ··············································································································································44~45RAF (Raw Edge / Laminated Type) ·············································································································44~45RPF (Raw Edge / Cogged Type) ·················································································································44~45Rib Ace ························································································································································44~45OHC Syncronous / STS Belts······················································································································44~45

Example of Application ··································································································································47~50Trouble Shooting ············································································································································51~60Belt Design Factors ·············································································································································61

This content might change without consent. Please ackowledge it. The numerical value is not a guarantee value.

4

《SYNCHRONOUS BELTS》

Description Material BeltProfile Page

King Power Synchronous Belts

(KPS �)P 10

High Performance STS Belts (HP-

STS)R 11

Long Synchronous / STS Belts

R 1�

Bancollan Long Synchronous /

STS BeltsP 1�

Synchronous Belts R 14~15

Super Torque Synchronous Belts

R 16~17

Double Sided Synchronous /

STS BeltsR 18

Bancollan Double Sided Synchronous

/ STS BeltsP 19

HTS Belts R �0

Bancollan Synchronous /

STS BeltsP �1~��

�Material: R=Rubber, P=Polyurethane

《V BELTS》


Fractional H.P. V Belts (FHP) AND

MULTIPLE V BELTS

R �4~�5

AGRICULTURAL V BELTS RED S �

R �6

AGRICUL TURAL V BELTS W800

R �7

Double V Belts R �8

Power Ace R �9~�0

Narrow V Belts SP-type

R �1

Variable Speed Belts

R ��

Bancollan V Belts (VC Type)

P ��

Bancollan V Belts (DC Type)

P ��

Banflex P �4

Bancord V Belts P 41

BANDOPowerTransmissionBeltsTable

5

BANDOPowerTransmissionBeltsTable《BANDED BELTS》


Power Scrum (V Belt Type)

R �6~�7

Power Scrum (Power Ace Type)

R �6~�7

Banflex Scrum P �5

《V RBBED BELTS》


Poly Banrope R �8

Bancollan Poly Banrope

P �9

《ROUND BELTS》


Bancollan Round Belts

(Seamless Type)P 40

Bancord Round Belts

(Openend Type)P 41

《FALT BELTS》


Bancollan Cordless Flat Belts

(Seamless type)P 41

PS Belts R / P 4�~4�

《ATUOMAOTIVE POWER TRANSMISSION BELTS》


(Wrapped Type) R 44~45

RAF (Laminated Type)

R 44~45

RPF (Cogged Type)

R 44~45

Rib Ace R 44~45

OHC Synchronous / STS

BeltsR 44~45

6

SelectionTableforBandoPowerTransmissionBeltsFind the Belt type you need in the first column. Then, reading across the page, find the belt that matches your Kilowatt, speed, elongation and/or center-to-center requirements.

TYPE OF BELTMaximum Kilowatt (KW) Maximum Speed (m/sec) Maximum

elongation ※1 (%)

Maximum Recommerdeo center distance (mm)

UNDER0.75

0.75~7.5 7.5~75OVER

75UNDER

�0�0~�0

OVER�0

UNDER500

500~ �000

OVER�000

Rubber belts

Fractional H.P. [�L] [4L] [5L][�L]15

[4L 5L]�0

1.5~�.0

V Belts

Multiple [A][B][C]

[D][E]

[A~E]�0

1.5~�.0 [A~E]

Red-s � [SA][SB][SC]

�0 1.5~�.0

Double-V [AA][BB][CC]

�0 1.5~�.0 [AA][BB][CC]

Narrow V Belts [�V][5V][8V]

40Under

1.0[�V] [5V, 8V]

Power Scrum (Banded Belts)

Narrow V type [�V][5V][8V]

40Under

1.0[�V] [5V, 8V]

Multiple V type [A][B][C]

[E][A~E]

�01.5~�.0 [A~E]

Variable Speed Belts [VA~VE] �0 1.0~1.5 [VA, VB] [VC,VD,VE]

RIB-ACE [PK][PK]50

1.0~1.5

V Ribbed Belts [J] [L] [M][J, L, M]

�01.5~�.0

Synchronous Belts[MXL][XL]

[L][H]

[XH][XXH] 50

Under0.15

STS[S4.5M][S5M]

[S8M] [S14M] 60Under0.15

Long Synchronous Belt (LSB-R) 10Under0.15

Polyurethane BeltsKing Power Synchronous Belt (KPS)

[S8M] [S14M] �0Under

0.1

Polyurethane V-Belts

FHP (�L) [�L] [�L] 1.5~�.0

Cogged V Belts (VC)

[J][J] 10

1.5~�.0

Double cogged V Belts (DC)

[J] 0.5~�.0

Cordless (Bancolan V Belts)

0.5~1.0

Open Ended (Bandcord V Belts)

[M] [A][B] �.0~�.0

Banflex [�M] [5M] [7M] [11M] 60Under

0.8

Banded Banflex [5MS] [7MS] [11MS] 60Under

0.8Polyurethane Flat Belts

Cordless 1.5~�.0

Polyurethane V Ribbed Belts [H] [J] �5 �.0~�.5

Polyurethane Round Belts

Endless�φ~ 5φ

10 0.5~1.0

Open End (Bancord)

1.5φ~ 15φ

10 �.0~5.0

Polyurethane Synchronous Belts

[XL][T5] [TN15]

[L] [T10]

�0Under 0.�5

Polyurethane Long SynchronousBelt (LSB-u)

10Under 0.�5

※1 As listed above, the numerical value shows permissible range of Elongation

1. COLOR CODE Recommended design area. Marginal design area - contact your local Bando distributor for further engineering information. Do not design in this area.

�. Numbers shown are maximums under normal operating conditions.�. Letters in [ ] show belt type.

7

TYPE OF BELT

Speed ratio Minimum pulley diameter (mm) Special applications

Under 1:5 1:5~1:10 Under

50 50~100 100~�00 OVER �00

Shock load

Horizontal drive

Backside ldler

Drive using backside

of beltRubber belts

V BeltsFractional H.P. [�L][4L] [5L]

Multiple [A]67 [B]118 [C]180

[D]�00 [E]450

Red-e � [SA]60 [SB]80 [SC]100

Double-V [AA]100 [BB]180 [CC]�60

Narrow V Belts 1:10 [�V]67 [5V]150 [8V]�00


Narrow V type 1:10 [�V]67 [5V]150 [8V]�00

Multiple V type [A]67 [B]118 [C]180

[D]�00 [E]450

Variable Speed Belts [VA]45[VB]60 [VC]70 [VD]80

RIB-ACE 50V Ribbed Belts �0 75 175

Synchronous Belts 1:10

[MXL] 1�teeth [XL] [L] 10teeth

[H] 14teeth

[XH] ��teeth [XXH]

��teeth

STS 1:10

[S8M] 18teeth [S4.5M] 1�teeth [S5M]

1�teeth

[S14M] �8teeth

Long Synchronous Belts (LSB-R) 1:10

[MXL] [XL][L] [S4.5M] [S5M]

[S8M] [H]

[XH] [S14M] [XXH]

Polyurethane BeltsKing Power Synchronous Betl (KPS) 1:10 [S8M]

18teeth[S14M] ��teeth


FHP (�L) [�L]Cogged V Belts (VC) [J]16

Double cogged V Belts (DC) [J]16

Cordless (Bancollan V Belts)Open Ended (Bancord V Belts) [M]80 [A]100

[B]150

Banflex

Banded Banflex (BANFLEX Scrum) 1:10 [5MS]�6

[7MS]40[11MS]

6�Polyurethane Flat Belts Cordless (0.6mmt)6

(1.0mmt)10

Polyurethane V Ribbed Belts [H]14 [J]�4


Endless [�mmφ]18 [5mmφ]�0

Open End (Bancord)

[�mmφ] ��

[10mmφ] 80

Polyurethane Synchronous Belts 1:10

[TN15] �0teeth

[XL][L][T5] 15teeth [T10]

1�teeth

Polyurethane long Synchronous Belts (LSB-u) 1:10

[S�M] [S�M] [XL][L]

[T5][T10]

[S8M] [H] [XH] [XXH]

1. COLOR CODE Recommended design area. Marginal design area - contact your local Bando

distributor for further engineering information. Do not design in this area.

BELTCHARACTERISTS

8

Oil Resistance

Acid Resistance

Alkali Resistance

Ozone Resistance

Water Resistance

Flame Resistance

Low Noise

Vibration BELT TYPE

Rubber belt

Fractional H.P.V BeltsMultiple, RED-S

DOUBLE-V

Narrow V Belts

Narrow V typePower Scrum (Banded Belts)

Multiple V type

Variable Speed Belts

V Ribbed Belts

RIB-ACE

Synchronous Belts, STS

Long Synchronous Belt (LSB-R)

Polyurethane BeltsKing Power Synchronous Belts (KPS)

FHP (�L)


Cogged V Belts (VC)Double Cogged V Belts (DC)Cordless (Bancollan V Belts)Open Ended (Bancord V Belts)

Banflex

Banded Banflex

CordlessPolyurethane Flat Belts

Polyurethane V Ribbed Belts

EndlessPolyurethane Round BeltsOpen End

(Bancord)Polyurethane Synchronous BeltsPolyurethane Long Synchronous Belts (LSB-u)

1. COLOR CODE Belt is perfectly suitable for conditions shown. Belt is adequately suitable for conditions shown. Belt is marginally suitable for conditions shown, but not recommendable. DO NOT apply belt in these environments.

OPERATINGCONDITIONS

9

SelectionTableforBandoPowerTransmissionBelts–2Find the type of Belt you need in the first clumn. Then, reading across the page, find the belt that matches your operating conditions.

BELT TYPE

DRIVING CONDITIONSAmbient Temperature Range

Electrical conductivity

-40 -�0 -�0 -10 0 10 �0 �0 40 50 60 70 80 90 100 110 1�0 � (-40) (-��) (-4) (14) (��) (50) (68) (86) (104) (1��) (140) (158) (176) (194) (�1�) (��0) (�48) (�)

Rubber Belts

V BeltsFractional H.P. less than 6M�

Multiple RED-S DOUBLE-V

less than 6M�

Narrow V Belts less than 6M�


Narrow V type less than 6M�

Multiple V type less than 6M�

Variable Speed Belts less than 6M�

V Ribbed Belts less than 6M�

RIB-ACE less than 6M�

Synchronous Belts, STSStandard less than 6M�

insulation over 100M�High Temperature Resistance

Long Synchronous Belts (LSB-R) less than 6M�

Polyurethane Belts

King Power Synchronous Belts 104~106M�

Polyurethane V Belts

FHP (�L) 104~106M�

Cogged V Belts (VC)

104~106M�

Double Cogged V Belts (DC)

104~106M�

Cordless (Bancollan V Belts)

104~106M�

Open End (Bancord V Belts)

104~106M�

Banflex 104~106M�

Banded Banflex 104~106M�

Polyurethane Flat Belte

Cordless 104~106M�

Polyurethane V Ribbed Belts 104~106M�


Endless 104~106M�

Open End (Bancord)

104~106M�

Polyurethane Synchronous Belts 104~106M�

Polyurethane Long Synchronous Belts (LSB-u)

104~106M�

10

3 1 2 4

Construction

1: Polyurethane backing�: Aramid tensile member�: Polyamid fiber loaded4: Polyurethane teeth

Features+Benefits

Exceptional power transmission capabilityThe KPS Belt can transmit 1.5 to 5 times more power than a standard STS belt drive. This allows the same power transmission capacity to be achieved using smaller pulleys, saving space and money.VersatileUtilize standard STS pulleys for a wide ratio selection.CleanWear resistant polyurethane construction reduces rubber dust.

Dimensions

HB

P

Type P H B

KPS� 8M 8.00 �.86 4.80KPS� 14M 14.00 5.00 8.50

�

�

�

Sizemark

600 KPS� 14M 1708

Belt pitch length (1708mm)Belt type (14mm tooth pitch)Belt width (mm) × 10 (60.0mm)

KPS�8M

Typenominalpitchlength(mm)

numberof

teethType

nominalpitchlength(mm)

Numberof

teethS8M640 640 80 S8M11�0 11�0 140

680 680 85 115� 115� 1447�0 7�0 90 1�00 1�00 150760 760 95 1�80 1�80 160800 800 100 1�60 1�60 170848 848 106 1440 1440 180896 896 11� 15�0 15�0 190944 944 118 1600 1600 �00

1000 1000 1�5 1696 1696 �1�10�4 10�4 1�8 179� 179� ��410�� 10�� 1�9 1960 1960 �451056 1056 1��

KPS�14M

Typenominalpitchlength(mm)

numberof

teethType

nominalpitchlength(mm)

Numberof

teethS14M994 994 71 S14M1568 1568 11�

11�0 11�0 80 1650 165� 1181190 1190 85 1708 1708 1��1�60 1�60 90 1890 1890 1�51400 1400 100 1960 1960 1401470 1470 105 ��80 ��80 170

StandardBeltwidth

(width mark: Belt width (mm)×10)

widthmark

150 �50 400 600 800 1000 1�00

Beltwidth(mm)

15 �5 40 60 80 100 1�0

KPS� 8MKPS� 14M

SYNCHRONOUS BELTS (POLYURETHANE)

KING POWER Synchronous Belts (KPS�)

11

24 3 1

Features

Exceptionally high power transmission capacityThis "high performance STS belt" achieves power transmission approximately 1.4 to 1.8 times as high as that with conventional STS belts.Compact designThe high power transmission can minimize the width of belt, thus making system design as compact as possible.Low noise level The high power transmission can minimize the width of belt, thus accomplishing a low noise operation.

*Conventional standard pulleys are also applicable.

*Standard belt sizes are available for the production of this belt.

�

�

�

Concept

Responding to needs for "Energy saving" and "High power t ransmiss ion" on indust r ia l machiner y in these years, we at BANDO have developed a "High-performance STS belt" capitalizing on our time-proven technology and experience.

Construction&Members

1.3.Rubber:

Using synthetic rubber having less tooth deformation and a high level of hardness.

2.Tensilemember:

Using fiber glass tensile member with considerations given to dimensional stability and flexibility.

4.Toothcanvas:

The tooth canvas has asperities on the surface and provides a low friction coefficient, accomplishing a low noise level of operation.Furthermore, the S14M Type provides two-ply tooth canvas, which enables further reductions in noise levels and improvement in durability.The HP-S5M Type is only avai lable for clean specification.

SYNCHRONOUS BELTS (RUBBER)

High-Performance STS Belts (HP-STS)

Dimensions

H2H1

P

W

Type P H1 H2 B

HP-S5M 5.00mm �.61mm 1.91mm �.�5mm

HP-S8M 8.00mm 5.00mm �.05mm 5.�0mm

HP-S14M 14.00mm �.70mm 5.�0mm 9.10mm

StandardBeltWidth

Sizemark

600 HP-S8M 1000

Belt pitch length (mm)

Belt type

Belt width (mm) × 10 (60mm)

WidthMark 100 150 �00 �50 400 600 800 1000 1�00

Width(mm) 10 15 �0 �5 40 60 80 100 1�0

HP-S5M � � �

HP-S8M � � � �

HP-S14M � � � � �

1�


Long Synchronous / STS Belts (LSB-R)

1 2

3

4

Construction

1: Chloroprene rubber backing�: Glass Fiber tensile member�: Chloroprene rubber teeth4: Nylon canvas

Features+Benefits

Al low for synchronous power t ransmiss ion and conveyance over longer spans than those available with traditional molded belts.Compared to chain drives, these belts are lighter, produce much less noise, and are much cleaner as they need no lubrication. In factory automation applications, these belts are perfectly suited to replace chain, flat power transmission belts, and conveyor belts.Seamless

Having no joints, they are as capable of transmission and conveyance as standard timing belts are. Belts can be manufactured in a length having the number of teeth that you specify. Belts can be manufactured to special specifications (reverse side logo, white color, etc.).

Endless

On-site endless processing is available. Increasing the number of joints allows synchronous conveyance or synchronous transmission over any span length.

Open-end

Capable of accurate reciprocating motion in indexing applications.

�

�

�

�

�

�

Dimensions

Long STS Belts

h1

h2

P

Unit: mm ( ) Dimension in seamless

Type P h1 h2

S�M �.0 0.76 1.�1S�M �.0 1.14 �.10

S4.5M 4.5 1.71 �.70S5M 5.0 1.91 �.6S8M 8.0 �.05 5.�0(6.05)

S14M 14.0 5.�0 (11.�0)

Long Synchronous Belts

P

h2

h1

Unit: mm ( ) Dimension in seamless

Type P h1 h2

MXL �.0�� 0.51 1.10XL 5.080 1.�5 �.�5L 9.5�5 1.90 �.50H 1�.700 �.�0 5.�0(5.�0)

XH ��.��5 6.�0 (1�.�0)XXH �1.75 9.60 (16.10)

Sizemark

Seamless (Without Joints) (Synchronous Belts)

�00 XH 1000

Belt length (mm)

Belt Type

Belt Nominal width (�': 50.8mm)

Seamless (Without Joints) (STS Belts)

500 S14M 7850

Belt length (mm)

Belt Type

Belt Nominal width (50mm)

Open-end (Synchronous Belts)

XL 0�5 × 5�M

Belt length (m)

Nominal width (0.�5': 6.4mm)

Belt Type

Open-end(STSBelts)�50 S8M × �0M

Belt length (m)

Belt Type

Nominal width (�5mm)

StandardSizes

Seamless(WithoutJoints)Type StandardNominalwidth Rangeofavailablebelt

H

100,�00,400,600,800,1000(inch × 100)

4.7~�0m

XH

XXH

S8M �50,500,1000,1500,�000,�000 (mm × 10)S14M

Unit: m

Open-end

Nominalwidth 019 025 031 037 050 075 100 150 200 300 Nominalwidth 50 60 70 80 100 140 150 200 250 300 400 500 600Width (mm) 4.8 6.4 7.9 9.5 1�.7 19.1 �5.4 �8.1 50.8 76.� Width (mm) 5 6 7 8 10 14 15 �0 �5 �0 40 50 60

MXL 4� �1 �5 41 �0 S�M 40 �5 �0 50XL 5� 4� �5 �6 �� S�M 50 40L 49 �� 47 S4.5M 45 40 �8H 4� �1 40 �8 17 S5M 40 40 40 �0 �4

S8M 40 50 40 �0 5� �8 �9 �4

P

h1

h2

P

h1

h2

1�

1 2

3

Construction

1: Polyurethane teeth�: Polyurethane backing�: Tensile member

Features+Benefits

The polyurethane construction of these long span belts make them ideally suited for synchronous transmission and conveyance in food processing machinery and other applications requiring a clean, dust-free drive.Endless

long-span belts capable of synchronous transmission and synchronous conveyance.

Open-end

Capable of accurate reciprocating motion in indexing applications.

StandardSizes

Endless(WithJoints) Openend

TypeStandardNominal

widthMaximumWidthin

mm(Nominalwidth)Maximumlength(m)

Minimumlength(m)

TypeStandardNominal

widthMaximumWidthin

mm(Nominalwidth)Max

length(m)S5M 100,150,�00,�50,�00,400,500 50(500) 50 0.5 S�M 50,100,150,�00,�50

�00,�50,40040(400) 60

S8M150,�00,�50,�00,400,500

750,1000 100(1000) �0 1.0�.0 S�M 60,1�0,180,�40,�00

�60,4�0,48048(480) 60

XL 0�5,0�1,0�7,050,075 100,150,�00 50.8(�00)

500.5

S5M 100,150,�00,�50,�00,400,500 50(500) 50L 050,075,100,150,�00 50.8(�00) 50 0.5 S8M 150,�00,�50,�00,400,500

750,1000100(1000) �0

H075,100,150,�00

�00,400 101.6(400) 50 0.5�.0 XL 0�5,0�1,0�7,050,075

100,150,�0050.8(�00) 50

T5 7,10,15,�0,�5,�0,40,50 50 50 0.5

T1015,�0,�5,�0,40,50

75,100 100 50 0.5�.0

L 050,075,100,150,�00 50.8(�00) 50H 075,100,150,�00,�00,400 101.6(400) 50T5 7,10,15,�0,�5,�0,40,50 50 50T10 15,�0,�5,�0,40,75,100 100 50

�

�

DimensionsBancollan Long STS Belts

Unit: mm ( )

Type P h1 h2

S�M �.00 0.76 1.40S�M �.00 1.14 �.00S�M 5.00 1.81 �.81S8M 8.00 �.85 5.00

Bancollan Long Synchronous Belts

Unit: mm ( )

Type P h1 h2

XL 5.080 1.�5 �.�5L 9.5�5 1.90 �.50H 1�.700 �.�0 4.�0T5 5.00 1.�0 �.�0

T10 10.00 �.50 4.50

Sizemark

�5 T10 - 890 S W - Jjointcord material (mark)Polyurethane material (mark)teeth numberBelt TypeBelt Nominal width (mm)

�40 S�M - 1000 L Wcord material (mark)Polyurethane material (mark)teeth numberBelt TypeBelt Nominal width (�40:�4mm)

0�7 XL - 1015 S Wcord material (mark)Polyurethane material (mark)teeth numberBelt TypeBelt Nominal width (0.�7inch=9.5mm)

Polyorethane material markS···(standard translucent)W···(standard milky-white)L ···(low friction milky-white)low friction milky-white)

cord markW···steel cordK ···aramid cord

M···(moisture and heat resistant milky-white)


Bancollan Long Synchronous / STS Belts (LSB-U)

H2 H

1

P

W

θ

14

2134

Construction

1: Chloroprene rubber backing.�: Glass Fiber tensile member.�: Chloroprene rubber tooth.4: Nylon canvas

Dimensions

Type P W H1 H2 �

MXL Mini Synchro �.0��mm(0.080")

(0.76)0.0�0

(1.1)0.04�

(0.51)0.0�0 40˚

XL Extra Light 5.08mm (0.�00")

(1.�5) 0.054

(�.�5) 0.09

(1.�5) 0.050 50˚

L Light 9.5�5mm (0.�75")

(�.�) 0.1�8

(�.5) 0.14

(1.9) 0.075 40˚

H Heavy 1�.7mm (0.500")

(4.4) 0.175

(4.�) 0.17

(�.�) 0.090 40˚

XH Extra Heavy ��.��5mm(0.875")

(8.0) 0.�1�

(11.�) 0.44

(6.�) 0.�50 40˚

XXH Double Extra Heavy �1.75mm (1.�50")

(1�.�) 0.477

(15.8) 0.6�

(9.6) 0.�75 40˚

StandardBeltWidth

BELTWIDTHNominalWidth 0�5 0�1 0�7 050 075 100 150 �00 �00 400 500 600

inch 1/8 �/16 1/4 5/16 �/8 1/� �/4 1 1-1/� � � 4 5 6mm �.� 4.8 6.4 7.9 9.5 1�.7 19.0 �5.4 �8.1 50.8 76.� 101.6 1�7.0 15�.4

MXL � � � � �

XL � � � � �

L � � � � �

H � � � � �

XH � � � � �

XXH � � � � �

Features

Non-slipAccurate tooth dimensions and minimal elongation virtually eliminate slippage and speed variation.No maintenanceNo lubrication is required.No high initial tension, thus keeping the bearing load very low.Space savingUtilizes small pulleys and short center distances.

Sizemark

(MXL)140 MXL 9.5

Belt width in mm

Belt Type

Number of teeth

(XL,L,H,XH,XXH)

140 XL 0�5Belt width 0.�5" (1/4")

Belt Type

Pitch length in inches ×10 (14"×10-140)

�

�

�

�


SYNCHRONOUS BELTS

15

StandardSizes

BELTTYPE PITCH BELTNUMBER

MXL※ (Rubber)

�.0��mm (0.080")

4 4 、 4 5 、 4 8 、 5 0 、 5 � 、 5 � 、 5 4 、 5 5 、 5 6 、 5 7、 5 9 、 6 0 、 6 1 、 6 � 、 6 � 、 6 4 、 6 5 、 6 7 、 6 8 、 6 9 、 7 0 、 7 1 、 7 � 、 7 � 、 7 4 、 7 5 、 7 6 、 7 7 、 7 8 、 7 9 、 8 0 、 8 1 、 8 � 、 8 � 、 8 4 、 8 5 、 8 6 、 8 7、 8 8 、 9 0 、 9 1 、 9 � 、 9 � 、 9 4 、 9 5 、 9 6 、 9 7、 9 8 、 9 9 、1 0 0 、1 0 1 、1 0 � 、1 0 � 、1 0 4 、1 0 5 、1 0 6 、1 0 8 、1 0 9 、 1 1 0 、1 1 � 、1 1 4 、1 1 5 、1 1 8 、1 1 9 、1 � 0 、1 � 1 、1 � � 、1 � � 、1 � 4 、1 � 5 、 1 � 6 、1 � 7、1 � 8 、1 � 9 、1 � 0 、1 � 1 、1 � � 、1 � 4 、1 � 5 、1 � 7、1 � 8 、1 4 0 、 1 4 � 、1 4 4 、1 4 5 、1 4 6 、1 4 8 、1 5 0 、1 5 1 、1 5 5 、1 5 8 、1 5 9 、1 6 0 、1 6 � 、 1 6 � 、1 6 4 、1 6 5 、1 6 9 、1 7 0 、1 7 5 、1 7 7、1 8 0 、1 8 4 、1 8 8 、1 9 0 、1 9 � 、 1 9 5 、1 9 6 、 � 0 0 、 � 0 4 、 � 0 5 、 � 0 8 、 � 1 0 、 � 1 � 、 � 1 5 、 � � 0 、 � � 1、 � � � 、 � � 4 、 � � 5 、 � � 6 、 � � 8 、 � � 0 、 � � � 、 � � 4 、 � � 6 、 � � 9、 � 4 0 、 � 4 5 、 � 4 8 、 � 4 9 、 � 5 0 、 � 51、 � 5 5 、 � 5 6 、 � 6 0 、 � 6 � 、 � 6 5 、 � 6 8 、 � 7 1、 � 7 � 、 � 7 5 、 � 8 0 、 � 8 1、 � 8 5 、 � 8 8 、 � 9 0 、 � 9 5 、 � 9 7、 � 0 0 、 � 0 5 、 � 0 8 、 � 1 0 、 � 1 � 、 � 1 5 、 � 1 8 、 � � 0 、 � � � 、 � � 6 、 � � 8 、 � � 0 、 � � � 、 � � 4 、 � � 6 、 � � 7、 � 4 7、 � 5 0 、 � 5 4 、 � 5 5 、 � 5 8 、 � 5 9 、 � 6 0 、 � 6 4 、 � 6 5 、 � 7 1、 � 7 � 、 � 8 0 、 � 8 8 、 � 9 7、 4 0 0 、 4 0 � 、 4 0 5 、 41 0 、 41 � 、 4 � 5 、 4 � 1、 4 � 4 、 4 � 5 、 4 4 0 、 4 4 8 、 4 5 � 、 4 6 4 、 4 6 8 、 4 7 � 、 4 7 5 、 4 8 0 、 4 8 7、 4 9 � 、 4 9 8 、 5 0 0 、 5 1 6 、 5 � � 、 5 �4、 5 � 5、 5 � 5、 5 5 0、 5 91、 61�、 6 6 5

XL (Rubber)

5.08 (0.�00")

5 0 、 6 0 、 6 4 、 6 8 、 7 0 、 7 � 、 7 4 、 7 6 、 7 8 、 8 0 、 8 4 、 8 8 、 9 0 、 9 � 、 9 4 、 9 6 、 9 8 、1 0 0 、1 0 � 、1 0 4 、1 0 6 、1 0 8 、11 0 、11 � 、114 、11 6 、11 8 、1 � 0 、 1 � � 、1 � 4 、1 � 6 、1 � 8 、1 � 0 、1 � � 、1 � 4 、1 � 6 、1 � 8 、1 4 0 、1 4 � 、1 4 4 、 1 4 6 、1 4 8 、1 5 0 、1 5 � 、1 5 4 、1 5 6 、1 5 8 、1 6 0 、1 6 � 、1 6 4 、1 6 6 、1 6 8 、 1 7 0 、1 7 � 、1 7 4 、1 7 6 、1 7 8 、1 8 0 、1 8 � 、1 8 4 、1 8 8 、1 9 0 、1 9 4 、1 9 6 、 1 9 8 、 � 0 0 、 � 0 � 、 � 0 6 、 � 0 8 、 � 1 0 、 � 1 � 、 � 14 、 � 1 6 、 � � 0 、 � � � 、 � � 4 、 � � 8 、 � � 0 、 � � 4 、 � 4 0 、 � 4 4 、 � 4 8 、 � 5 0 、 � 6 0 、 � 6 � 、 � 6 6 、 � 7 0 、 � 7 6 、 � 8 0 、 � 8 � 、 � 9 0 、 � 0 0 、 � 1 0 、 � 14 、 � � 0 、 � � � 、 � � 0 、 � 4 0 、 � 4 4 、 � 4 8 、 � 5 � 、 � 5 6 、 � 6 0 、 � 6 4 、 � 7 0 、 � 7 � 、 � 7 6 、 � 8 4 、 � 8 6 、 � 8 8 、 � 9 0 、 � 9 6 、 4 0 0 、 4 0 8 、 4 � 4 、 4 � 0 、 4 5 0 、 4 5 6 、 4 6 0 、 4 7 0 、 4 9 0 、 4 9 6 、 5 1 0 、 5 4 0 、 5 6 4 、 5 9 � 、 6 0 8 、 6 � 0 、 6 � 8 、 6 8 6 、 8 � 8 、 8 6 0 、 8 8 8 、 9 0 0 、 9 0 8 、 9 14 、 9 � 6、 1014、 10 � 0

BELTTYPE PITCH BELTNUMBER

L (Rubber)

9.5�5mm (0.�75")

9 8 、1 0 9 、1 � 4 、1 � 5 、1 5 0 、1 6 5 、1 6 9 、1 7 � 、1 8 7、 � 0 � 、 � 1 0 、 � 1 8 、 � � 5 、 � 4 0 、 � 4 8 、 � 5 5 、 � 6 � 、 � 7 0 、 � 7 7、 � 8 5 、 � 0 0 、 � 0 4 、 � 1 5 、 � � 0 、 � � � 、 � � 4 、 � � 7、 � 4 5 、 � 6 0 、 � 6 7、 � 7 5 、 � 8 � 、 � 9 0 、 � 9 4 、 4 � 0 、 4 � 7、 4 � 6 、 4 � 9 、 4 4 6 、 4 5 0 、 4 6 5 、 4 8 0 、 5 1 0 、 5 14 、 5 � 5 、 5 4 0 、 5 4 8 、 5 8 1、 6 0 0 、 6 0 5 、 6 1 9 、 6 � 0 、 6 4 0 、 6 5 � 、 6 6 0 、 6 9 7、 7 � 8 、 7 � 1、 7 6 7、 7 8 0 、 7 8 8、 8 0 6、 8 5 5、 8 6 �、 8 81、 915、 919、 9 � 8、 1� 9 4

H (Rubber)

1�.700mm (0.5")

1 8 5 、 � � 5 、 � � 0 、 � 4 0 、 � 4 5 、 � 7 0 、 � 8 0 、 � 0 0 、 � 1 0 、 � 1 5 、 � � 0 、 � � 0 、 � 4 0 、 � 5 0 、 � 6 0 、 � 7 0 、 � 7 5 、 � 9 0 、 4 0 0 、 41 0 、 4 � 0 、 4 � 0 、 4 5 0 、 4 6 5 、 4 8 0 、 4 9 0 、 51 0 、 5 � 0 、 5 4 0 、 5 6 0 、 5 6 5 、 5 7 0 、 5 8 0 、 6 0 0 、 6 0 5 、 6 � 0 、 6 4 0 、 6 5 0 、 6 6 0 、 6 8 0 、 7 0 0 、 7 � 0 、 7 5 0 、 7 6 0 、 7 7 0 、 8 0 0 、 8 1 0 、 8 � 0 、 8 4 0 、 8 5 0 、 8 6 0 、 8 8 0 、 9 0 0 、 9 5 0 、 9 8 5 、1 0 0 0 、1 0 � 0 、1 0 5 0 、11 0 0 、 11� 0、 114 0、 1� 5 0、 1� � 5、 1� 5 0、 14 0 0、 16 8 0、 17 0 0

XH (Rubber)

��.��5mm (0.875")

5 0 7、 5 6 0、 6 � 0、 7 0 0、 7 � 5、 7 7 0、 8 4 0、 8 7 5、 9 � 7、 9 8 0、11� 0、1� 6 0、 14 0 0、 15 4 0、 17 5 0

XXH (Rubber)

�1.750mm (1.�50")

7 0 0、 8 0 0、 9 0 0、 10 0 0、 1� 0 0、 14 0 0、 16 0 0、 18 0 0、 1915

※ For MXL (only) belt number equals number of teeth. All others refer to pitch length in inches.


SYNCHRONOUS BELTS

H2H1

P

W

16

24 3 1

Features

High torque capacity driveUnique tooth profile enables the belt to transmit higher power.Lower noise levelSmoother tooth engagement and direct contact of tooth top with the pulley grooves' enables the belt to run quietly even at high speeds.Long service lifeAs the belt tooth meshes with the pulley grooves, the cord lay forms an almost true circle. This minimizes the cantilever effect on the cords, resulting in reduced bending fatigue and longer service life.No maintenanceNo lubrication or retension required.Space savingDue to Higher Power Transmission Capacity, the belt width and the pulley width can be designed narrower. This means machine space can be reduced and the machine can be designed more compactly.

StandardBeltWidth

WidthMark 40 60 100 150 �00 �50 400 600 800 1000 1�00Width(mm) 4 6 10 15 �0 �5 40 60 80 100 1�0

S1.5M � � �

S2M � � � � �

S3M � � �

S4.5M � � �

S5M � � � �

S8M � � � �

S14M � � � � �

�

�

�

�

�

Construction

1: Chloroprene rubber backing�: Glass Fiber tensile member�: Chloroprene rubber tooth4: Nylon canvas

Dimensions

Type P h1 h2 WS1.5M 1.5mm 0.57mm 1.1�mm 0.98mm

S�M�.0mm(0.078")

1.�1mm(0.05�")

0.76mm(0.0�9")

1.�mm(0.051")

S�M�.0mm(0.118")

�.1mm(0.08�")

1.14mm(0.044")

1.95mm(0.076")

S4.5M4.5mm(0.177")

�.70mm(0.106")

1.71mm(0.067")

�.9�mm(0.115")

S5M5.0mm(0.197")

�.61mm(0.14�")

1.91mm(0.075")

�.�5mm(0.1�8")

S8M8.0mm(0.�15")

5.�mm(0.�1�")

�.05mm(0.1�0")

5.�0mm(0.�05")

S14M14.0mm(0.551")

10.�mm(0.40�")

5.�0mm(0.�09")

9.10mm(0.�58")

Sizemark

600 S8M 1000Belt pitch length (1000mm)

Belt type (8mm tooth pitch)

Belt width (mm) × 10 (60mm)


SUPER TORQUE SYNCHRONOUS (STS) BELTS

17

StandardBeltLength

BELTTYPEBELTPITCH

(mm)BELTNUMBER(PITCHLENGTHmm)

S1.5M (Rubber)

1.5 9 � 、9 � 、9 5 、9 8 、9 9 、1 0 1、1 0 � 、1 0 8 、11 9 、1 � 4 、1 5 0 、1 5 8 、1 6 1、1 6 4 、 1 6 5 、1 6 8 、174 、18 0 、18 5 、18 6 、� 0 4 、� 0 6 、� 1 0 、� � 4 、� � 5 、� � 6 、� 4 0 、 � 5 5 、� 6 1、� 6 � 、� 7 � 、� 8 1、� 8 8 、� 9 0、� 0 � 、� 0 5 、� 15 、� � 5 、� 9 0、4 41、 4 4 4、4 8 0、1116

S�M (Rubber)

�.0 8 6 、 8 8 、 9 0 、 9 � 、 9 4、 9 8 、10 0 、10 � 、10 4、10 6 、10 8 、11� 、114、116 、118、1�0、1��、1�4、1�6、1�8、1�0、1��、1�4、1�8、140、14�、144、148、150、15�、156、158、160、16�、164、166、168、170、17�、174、176、178、180、18�、184、186、190、19�、194、198、 �00、 �0�、 �04、 �10、 �1�、 �14、�16、 �18、 ��0、 ��、 ��4、 ��6、 ��0、 ��、 ��4、 ��6、 ��8、 �40、 �4�、 �44、�48、 �50、 �54、 �56、 �58、 �60、 �6�、 �64、 �66、 �7�、 �74、 �78、 �80、 �8�、�84、 �86、 �88、 �90、 �9�、 �96、 �00、 �08、 �10、 �1�、 �14、 �16、 �18、 ��0、��、 ��4、 ��6、 ��8、 ��0、 ��、 ��8、 �40、 �4�、 �44、 �50、 �60、 �64、 �70、�7�、 �74、 �76、 �80、 �86、 �90、 �96、 400、 406、 408、 416、 4�0、 4�6、 4�8、4�8、 448、 45�、 454、 460、 468、 474、 486、 490、 494、 500、 5�0、 5�0、 5��、540、 550、 558、 560、 57�、 580、 594、 596、 600、 604、 606、 6�0、 6�0、 6��、650、 65�、 656、 668、 676、 69�、 700、 710、 74�、 75�、 754、 766、 796、 800、 810、 8�6、 898、 900、 940、 946、 950、 984、1000、10��、10�6、1066、1074、 1100、 1110、 11�6、 1154、 1166、 1��4、 1��8

S�M (Rubber)

�.0 1��、1�9、144、150、156、159、16�、168、171、174、177、180、18�、186、189、19�、195、198、 �01、 �04、 �07、 �10、 �1�、 �19、 ��、 ��5、 ��8、 ��4、��7、 �40、 �4�、 �46、 �49、 �5�、 �55、 �58、 �64、 �67、 �70、 �7�、 �76、 �79、�8�、 �85、 �88、 �91、 �97、 �00、 �0�、 �09、 �1�、 �15、 �18、 ��4、 ��7、 ��0、��、 ��6、 ��9、 �4�、 �51、 �54、 �60、 �6�、 �66、 �69、 �7�、 �75、 �78、 �84、�87、 �90、 �96、 �99、 40�、 405、 408、 417、 4�0、 4��、 4�6、 4��、 4�8、 444、447、 45�、 459、 468、 471、 474、 480、 486、 489、 49�、 498、 501、 507、 51�、516、 519、 5��、 5�5、 5�4、 5�7、 540、 549、 55�、 555、 564、 57�、 579、 588、597、 600、 609、 6�1、 6��、 648、 657、 660、 666、 681、 690、 699、 7�6、 7�5、741、 750、 768、 771、 789、 804、 810、 8�5、 85�、 88�、 885、 888、 900、 918、9�7、 9�6、 990、 1119、 11�4、 1146、 1188、 1�99、 1419、 15�0

S4.5M (Rubber)

4.516�、180、198、 ��5、 ��9、 �5�、 �79、 �84、 �15、 ��4、 �51、 �8�、 �96、 450、491、 504、 518、 558、 56�、 61�、 6�0、 711、 7�9、 801、 10�1、 �111

S5M (Rubber)

5.0 ��5、 ��0、 �55、 �75、 �95、 �00、 ��0、 ��5、 �50、 �75、 �80、 �90、 400、 410、4�0、 4�5、 4�5、 440、 445、 450、 475、 490、 500、 5�0、 5�5、 550、 560、 565、570、 575、 600、 6�5、 6�5、 645、 650、 665、 670、 675、 695、 700、 710、 7�5、740、 750、 765、 770、 775、 800、 810、 8�0、 850、 860、 870、 900、 9�0、 940、950、 965、 975、 1000、 10�5、 1050、 11�5、 11�5、 1145、 1195、 1��5、 1�50、1�60、 1�70、 1�95、 1�50、 14�0、 1595、 1715、 1800、 �000

S8M (Rubber)

8.0 �5�、 �84、 408、 4�4、 456、 480、 5�0、 5�8、 560、 584、 600、 6��、 640、 656、67�、 680、 71�、 7�0、 7�8、 760、 800、 8�4、 840、 848、 880、 888、 896、 9�0、944、 960、 976、 984、1000、10��、1040、1056、1096、11�0、11�6、115�、1160、1184、119�、1�00、1�16、1��4、1�40、1�48、1�7�、1�80、1�96、1�1�、1�44、1�5�、1�84、1�9�、1400、14�4、1440、1480、15�0、155�、1600、17�8、1760、1776、1800、1808、1880、195�、 �000、 �1�0、 �160、 ��40、 ��04、 �400、 �496、�560、 �600、 �800、 �880、 �944、 ��00、 �600、 �7�0、 �904、 4400

S14M (Rubber)

14.01008、11�0、1190、1�46、1400、1540、1610、165�、1778、1806、1890、1904、1960、 �00�、 �100、 ��40、 ��10、 ��80、 �450、 �506、 �590、 �660、 �800、 �150、 ��48、 �500、 �556、 �850、 4004、 4060、 4��6、 4508、 501�


SUPER TORQUE SYNCHRONOUS (STS) BELTS

18


DOUBLE SIDED SYNCHRONOUS / STS BELTSDOUBLE SIDED STS BELTS DOUBLE SIDED SYNCHRONOUS BELTS

2 1

3

2

3

1

Construction1: Nylon Canvas �: Chloroprene rubber backing �: Glass fiber tensile member

DimensionandSizemark

�50 D - S8M 1400

Nominal Length in mmTypeDOUBLE SIDEDNominal width in mm × 10

600 D - H 150

Nominal Width in inch × 100TypeDouble sidedNominal length in inch × 10

StandardSizes

Type P(mm)Nominal

WidthNominal Length

DS�M �40, 60,

100

�00 �04 �06 �08 �10 �1� �14 �16 �18 ��0 �� 4 ��6 ��8 ��0 �� 4 ��6 ��8 �40 �4� �44 �50 �54 �60 �64 �70 �7� �74 �76 �80 �86 �90 �96 400 406 408 410 416 4�0 4�6 4�8 4�4 4�6 4�8 440 448 45� 454 456 460 468 474 480 486 490 494 500 506 5�0 5�4 5�0 5�� 540 550 558 560 57� 580 594 596 600 604 606 6�0 6�0 6�� 650 65� 654 656 660 668 676 69� 700 710 7�6 74� 75� 754 766 796 800 810 8�6 8�8 848 864 898 900 940 946 950 984 1000 10�0 10�4 10�� 10�6 104� 1064 1066 1074 1086 1094 1100 1110 11�6 1154

DS�M �60, 100, 150

�00 �0� �06 �09 �09 �1� �15 �18 ��4 ��7 ��0 �� 6 ��9 �4� �51 �54 �60 �6� �66 �69 �7� �75 �78 �84 �87 �90 �96 �99 40� 405 408 417 4�0 4�� 4�6 4�� 4�8 444 447 45� 459 468 471 474 480 486 489 49� 498 501 507 51� 516 519 5�� 5�5 5�4 5�7 540 549 55� 555 564 57� 579 588 597 600 609 6�1 6�� 6�6 648 657 660 666 681 690 699 7�0 7�6 7�5 741 750 768 771 789 804 810 8�5 85� 858 88� 885 888 900 909 918 9�7 9�6 954 990 999 1014 1050 1119 11�4 1146 1176 1188 1�99 1419 15�0

DS5M 5 �

4�0 4�5 4�5 440 445 450 476 490 500 5�0 5�5 550 560 565 570 575 600 6�5 6�5 645 650 665 670 675 695 700 710 7�5 740 750 765 770 775 780 800 810 8�0 850 860 870 900 9�0 940 950 965 975 1000 10�5 1050 1085 11�5 11�5 1145 1195 1��5 1�50 1�60 1�70 1�95 1�50 14�0 1595 1715 1800 1860 �000

DS4.5M 4.560, 100,

150450, 491, 504, 518, 558, 56�, 61�, 6�0, 711, 7�9, 801, 10�1

DS8M 8.0 150, �50, 400, 600

480, 5�0, 5�8, 560, 584, 600, 6��, 640, 656, 67�, 680, 71�, 7�0, 7�8, 760, 800, 8�4, 840, 848, 880, 888, 896, 9�0, 944, 960, 976, 984,1000, 10��, 1040, 1056, 1096, 11�0, 11�6, 115�, 1160, 1184, 119�, 1�00, 1�16, 1��4, 1�40, 1�48, 1�7�, 1�80, 1�96, 1�1�, 1�44, 1�5�, 1�84, 1�9�, 1400, 14�4, 1440, 1480, 15�0, 155�, 1600, 17�8, 1760, 1776, 1800, 1808, 1880, 195�, �000, �1�0, �160, ��40, ��04, �400, �496, �560, �600, �800, �880, �944, ��00, �500, �7�0, �904, 4400

DS14M 14.0

400, 600, 800, 1000, 1�00

1008, 11�0, 1190, 1�46, 1400, 1540, 1610, 165�, 1778, 1806, 1890, 1904, �00�, �100, ��40, ��10, ��80, �450, �506, �590, �660, �800, �150, ��48, �500, �556, �850, 4004, 4060, 4��6, 4508, 501�

※Please contact us.

Type P(mm)Nominal

WidthNominal Length

DXL 5.0800�5, 0�1, 0�7, 050,

075,

160, 16�, 164, 166, 168, 170, 17�, 174, 176, 178, 180, 18�, 184, 188, 190, 194, 196, 198, �00, �0�, �06, �08, �10, �1�, �14, �16, ��0, ��, ��4, ��8, ��0, ��4, �40, �44, �48, �50, �60, �6�, �66, �70, �76, �80, �8�, �90, �00, �10, �14, ��0, ��, ��0, �40, �44, �48, �5�, �56, �60, �64, �70, �7�, �76, �84, �86, �88, �90, �96, 400, 408, 4�4, 4�0, 450, 456, 460, 470, 490, 496, 510, 540, 564, 59�, 608, 6�0,

DL 9.5�5050, 075, 100, 150,

�00,

165, 169, 17�, 187, �0�, �10, �18, ��5, �40, �48, �55, �6�, �70, �77, �85, �00, �04, �15, ��0, ��, ��4, ��7, �45, �60, �67, �75, �8�, �90, �94, 4�0, 4�7, 4�6, 4�9, 446, 450, 465, 480, 510, 514, 5�5, 540, 548, 581, 600, 605, 619, 6�0, 640, 65�, 660, 697, 7�8, 7�1, 767, 780, 788, 806, 855, 86�, 881, 915, 919, 9�8

DH 1�.700075, 100, 150, �00,

�00,

185, ��5, ��0, �40, �45, �70, �80, �00, �10, �15, ��0, ��0, �40, �50, �60, �70, �75, �90, 400, 410, 4�0, 4�0, 450, 465, 480, 490, 510, 5�0, 540, 560, 565, 570, 580, 600, 605, 6�0, 640, 650, 660, 680, 700, 7�0, 750, 760, 770, 800, 810, 8�0, 840, 850,860, 880, 900, 950, 985, 1000, 10�0, 1050, 1100,11�0, 1140, 1�50, 1��5, 1�50, 1400, 1680, 1700

19

1 2

DXL

1 2

DT5, DT10

Construction

1: Polyurethane Teeth �: Steel wire tensile member

DimensionsandSizemark

180 D × L 0�7 UK

Material Mark

Nominal width in inch × 100

Type

Nominal length in inch × 10

�5 D T 10 1800

Pitch length in mm

Type

Nominal Width in mm

StandardSizes

Type P(mm)Nominal

WidthNominal Length

DXL 5.0800�5, 0�1, 0�7, 050,

075

140, 146, 150, 166, 170, 180, 190, �00, �10, ��0, ��0, �40, �70, �90, �00, ��0, �76, 400, 4�0, 490

Type P(mm)Nominal

WidthNominal Length

DT5 5.005, 10, 15,

�0, �5�00, 410, 460, 480, 515, 550, 590, 6�0, 650, 700, 750, 800, 815, 860, 900, 940, 1075, 1100

DT10 10.0015, �0,

�5, �0, 50

�60, 5�0, 6�0, 660, 700, 7�0, 800, 840, 900, 980, 1100, 1�10, 1�40, 1�50, 1��0, 1�50, 14�0, 1500, 1610, 1800, 1880


BANCOLLAN DOUBLE SIDED SYNCHRONOUS / STS BELTS

�0

24 3 1 Construction

1: Chloroprene rubber backing�: Glass fiber tensile member�: Chloroprene rubber tooth4: Nylon canvas

Dimensions

H2

P

H1

Sizemark

1000 8M 50

Belt Width (mm)Belt TypeBelt Pitch length

Type P H1 H�8M 8.0mm 5.�mm �.5mm14M 14.0mm 10.�mm 6.0mm

StandardSizes

StandardBeltWidth

Width(mm) �0 �5 �0 40 50 55 60 70 85 100 115 1�0 150 1708M � � � � � - � - � - - - - -

14M - - � � - � - � � � � � � �

Belt Type Belt number (Pictch length mm)

8M �84, 4�4, 480, 560, 600, 6�4, 640, 656, 680, 7�0, 760, 800, 840, 856, 880, 896, 9�0, 960, 1000, 1040, 1056, 1064, 1080, 11�0, 115�, 1160, 1184, 119�, 1�00, 1��4, 1�48, 1�64, 1�80, 1�04, 1�60, 1�9�, 1400, 14�4, 1440, 1480, 151�, 15�0, 1584, 1600, 1680, 17�8, 1760, 1800, 1904, �000, �056, �064, �080, �104, �1�0, �160, �180, ��40, ��48, ��7�, ��04, ��60, �400, �4��, �504, �584, �600, �648, �660, �7�0, �800, �904, �940, �000, �048, �07�, �15�, ��00, ��48, ��80, ��5�, ��60, �448, �55�, �600, �648, �75�, �87�, 4000, 41�0, 4�48, 4�68, 4400, 4504, 46�4, 475�, 487�, 5000

14M 966, 109�, 1190, 1�44, 1400, 1456, 1540, 1610, 1680, 1778, 1890, �00�, �058, �100, �114, �184, �198, ��40, ��96, ��10, ��66, �4�6, �450, �506, �576, �590, �646, �716, �800, �898, �996, �066, �150, ��48, ��46, ��60, �444, �500, �556, �654, �75�, �850, �864, 4004, 4116, 4�56, 4��6, 4�68, 4494, 4578, 46�0, 4746, 487�, 4956, 4998


HTS Belts

BANCOLLAN STS BELTS

�1

213

Construction

1: Polyurethane backing �: Steel cord tensile members (For MXL, Aramid tensile members)�: Polyurethane teeth

Features

Non-slipAccurate tooth dimension and steel cord ensures minimal stretching, no slippage and constant spends.High oil and ozone resistance.Special backside surfaces are available.Bando can mold virtually any special configuration on the belt's backside surface.

Sizemark

(MXL)140 MXL 9.5 U K

Cord markMaterial mark (polyurethane)Belt width in mmBelt typeNumber of teeth

(T2.5,T5,T10)10 T5 - �80

Pitch length mmBelt typeBelt width in mm

Sizemark

60 S�M �00 U GCord markMaterial mark (polyurethane)Pitch length in mm Belt typeBelt width in mm × 10 (6.0mm)

�

�

�

We recommend Bando Bancollan Synchronous Belts are ideal for the following conditions.

For improved performance from the belt i.e. as a conveyor or print drive, special shapes or indications can be formed on the backside.High oil or ozone resistance.High shock load applications.

Dimensions

H2 H

1

P

W

θ

Type P W H1 H2 �

MXL�.0��mm(0.080")

0.76mm(0.0�0")

1.�mm(0.04�")

0.51mm(0.0�0")

40˚

XL5.08mm(0.�00")

1.�5mm(0.05�")

�.�5mm(0.089")

1.�5mm(0.049")

40˚

L9.5�5mm(0.�75")

�.�mm(0.1�6")

�.5mm(0.1�8")

1.9mm(0.075")

40˚

T�.5�.5mm

(0.098")1.0mm

(0.0�9")1.�mm(0.051")

0.7mm(0.0�8")

40˚

T55.0mm(0.197")

1.80mm(0.071")

�.�mm(0.087")

1.�mm(0.047")

40˚

T1010.0mm(0.�94")

�.5mm(0.1�8")

4.5mm(0.177")

�.5mm(0.098")

40˚

(XL,L)

140 XL - 0�5 UMaterial mark (polyurethane)Belt width 6.4mm (0.�5")Belt typePitch length in inches × 10 (14" × 10=140)

For XL type, Aramid cord (K) is available.

Dimensions

P

W

H2 H

1

Type P W H1 H2CordMark

S�M �.0mm 1.�mm 1.4mm 0.76mm G K

S�M �.0mm 1.95mm �.0mm 1.14mm G K

※Cord markG···Glass cordK···Aramid cord

�

�

�


BANCOLLAN SYNCHRONOUS BELTS

��


BANCOLLAN SYNCHRONOUS / STS BELTS

StandardSizes

BELTTYPE

P(mm)NOMINAL

WIDTHBELTNUMBER(PITCHLENGTHmm)

S�M (Polyurethene)

�.0 4 0 、6 0 、1 0 0 76、78、80、86、90、9�、100、10�、106、110、11�、114、116、1�0、1��、1�6、1�8、1�8、140、14�、144、148、158、160、164、166、168、170、17�、176、180、184、186、190、�00、�06、�14、�16、�18、��0、��4、��0、��4、��6、��8、�40、�50、�56、�58、�60、�64、�66、�80、�90、�96、�00、�14、�16、��0、��4、�40、�54、�60、�70、�80、�96、400、4�6、440、448、454、460、474、480、488、494、500、504、5�0、544、548、560、580、600、6�0、6�0、654、710、754、790、800、806、8�8、�900、976、�1000、��50

�Aramid Cordonly

S�M (Polyurethene)

�.0 6 0 、1 0 0 、1 5 0 1�0、144、150、159、16�、171、174、177、186、19�、195、�01、�04、�10、�1�、�19、��、��5、��4、��7、�40、�46、�5�、�55、�64、�67、�70、�76、�85、�00、�1�、�18、��7、��9、�4�、�54、�60、�78、�84、�90、�96、40�、405、417、4�0、4��、447、45�、459、486、501、504、507、51�、516、519、5�7、564、588、600、609、6��、660、666、681、699、750、765、774、789、804、810、885、900、9�6、951、1005、1050、1146、1�60、1�8�、1596、1800、�100

BELTTYPE

P(mm)NOMINAL

WIDTHBELTNUMBER(NOOFTEETH)

T�.5 (Polyurethene)

�.500 � 、5 、7 、10、1�

1�0、145、160、177.5、�00、��0、�45、�65、�85、�05、�17.5、��0、�80、4�0、480、49�.5、500、600、6�0、650、780、915、950

T5 (Polyurethene)

5.000 5 、1 0 、1 5 、 � 0 �5

165、185、�00、�15、��0、��5、�45、�50、�55、�60、�70、�75、�80、�95、�00、�05、��5、��0、�40、�50、�55、�65、�75、�90、400、410、4�0、4�5、450、455、465、475、480、500、510、5�5、545、550、560、575、600、610、6�0、6�0、640、650、660、675、690、695、700、7�0、750、780、800、815、840、850、900、940、990、1000、1075、1100、1140、1�15、1�80、1440

T10 (Polyurethene)

10.000 1 5 、 � 0 、 � 5 、 � 0 、5 0

�60、�70、400、410、440、450、500、5�0、560、610、6�0、660、690、700、7�0、750、780、810、840、880、890、900、9�0、960、970、980、1000、1010、1080、1110、1140、1150、1�10、1�40、1�50、1�00、1��0、1�50、1�90、1400、14�0、1440、1450、1460、1500、1560、1610、1750、1780、1880、1960、��50

MXL (Polyurethene)

�.0�� .�、4.8、6.4、 9.5、1�.7

�0、�5、�7、40、41、4�、45、48、50、5�、5�、54、55、56、57、60、6�、65、6 7、6 8、7 0、71、7 �、7 �、7 5、7 6、7 9、8 0、81、8 �、8 �、8 5、8 7、8 8、90、91、94、95、97、98、100、10�、10�、106、110、11�、114、115、118、1�0、1��、1�5、1�6、1�8、1�0、1��、1�4、1�6、140、144、150、155、157、160、165、170、175、180、184、190、194、195、 �00、 �05、 �10、 �1�、 �15、��0、 ��5、 ��0、 ��6、�40、�50、�55、�60、�65、�70、�80、�95、�00、�05、�10、��0、��6、�40、�47、�50、�60、4�8、45�、468、579、660

BELTTYPE

P(mm)NOMINAL

WIDTHBELTNUMBER(PITCHLENGTHINCHES×10)

XL (Polyurethene)

5.080 0�5、0�1、0�7、 050、075

60、70、80、84、90、96、100、110、114、1�0、1�0、140、150、154、156、160、166、168、170、176、180、190、198、 �00、 �0�、 �10、 �1�、 ��0、 ��0、 ��6、�40、�50、�54、�60、�70、�90、�00、��0、��0、�76、�96、414、4�0、460、478、480、490、51�、564、6�0、670、686、7�0

L (Polyurethene)

9.5�5 050、075、100、 150、 �00

1�4、150、165、187、 �10、 ��5、 �40、 �55、 �70、 �85、�00、��、�45、�60、�67、�90、4�0、450、480、510、540、600

��

Bancollan Synchronous belts TN type is a highly precise, extra light-duty belt with a unique profile.

Features+Benefits

Complete synchronized transmissionLight drive systemCalm and smooth drive

Dimensions StandardWidth

P

R2.0

H2 H

1

Type P H1 H2

TN15 1.5 1.� 0.7

TN10 1.0 0.85 0.44

unit: mm

TN15

NominalWidth Width(mm)

�.0 5.0 7.0

10.0 1�.0

�.0 5.0 7.0

10.0 1�.0Sizemark

180 TN15 - 5.0 K CORD MARKNominal widthBelt typeNumber of teeth

※CORD MARKK=AramidW=Steel wireT=Polyester

(As for TN10, polyester cord is only available)

TN10

NominalWidth Width(mm)

1.0 �.0 �.0

1.0 �.0 �.0

TN10 Type

StandardSizes

BELTNUMBER

Pitchlength(mm)

numberofteeth

BELTNUMBER

Pitchlength(mm)

numberofteeth

BELTNUMBER

Pitchlength(mm)

numberofteeth

4�TN15 50TN15 60TN15 6�TN15

64.575.090.094.5

4�50606�

�70TN15�71TN15�90TN15�98TN15

405.0406.54�5.0447.0

�70�71�90�98

50TN1060TN1080TN1081TN1090TN10

50.060.080.081.090.0

5060808190

79TN158�TN15100TN15110TN15114TN151�0TN15

118.51��.0150.0165.0171.0180.0

798�1001101141�0

�00TN15�10TN15��0TN15��0TN15��4TN15

450.0465.0480.0495.0501.0

�00�10��0��0��4

98TN10100TN10107TN10110TN101�0TN10

98.0100.0107.0110.01�0.0

981001071101�0

1�0TN151�1TN15140TN15

195.0196.5�10.0

1�01�1140

��9TN15�40TN15�50TN15�60TN15�70TN15

508.5510.05�5.0540.0555.0

��9�40�50�60�70

1�0TN10140TN10150TN10160TN10170TN10

1�0.0140.0150.0160.0170.0

1�0140150160170

150TN15160TN15170TN15180TN15

��5.0�40.0�55.0�70.0

150160170180

�80TN15�90TN15400TN154�1TN15441TN15

570.0585.0600.06�1.5661.5

�80�904004�1441

�00TN10�50TN10�87TN10�10TN10

�00.0�50.0�87.0�10.0

�00�50�87�10

186TN15190TN1519�TN15196TN15�00TN15

�79.0�85.0�88.0�94.0�00.0

18619019�196�00

460TN15480TN15481TN158�8TN15

690.07�0.07�1.5

1�4�.0

4604804818�8

��0TN15��0TN15�40TN15�50TN15�60TN15

��0.0�45.0�60.0�75.0�90.0

��0��0�40�50�60

�

�

�


BANCOLLAN SYNCHRONOUS BELTS IN-TYPE

TN15 Type

�4

V BELTS (RUBBER)

FRACTIONAL H.P. V-BELTS (FHP) AND MULTIPLE V BELTS

1

2

3

4

Construction

1: Rubber impregnated canvas�: Polyester tensile members�: Chloroprene insulation rubber4: Chloroprene compression rubber

Features

FHP V-BELTS

Bando FHP V-Belts are built for maximum tension control, drive uniformity and long life, with minimum heat build-up and stretching on low horsepower elec-tricmotoros and gasoline engines. They are designed for high speed and short center distance.

MULTIPLE V-BELTS

For multiple drive, high speed and high torque drives on light or heavy industrial or automotive machinery. Bando Multiple V-Belts have exceptional length stability and drive uniformity. Rigorous testing has shown these Premium Quality Belts to have twice the service life and significantly greater transmission capacity than most other multiple V Belts.

Dimensions

a

θ b

Topwidtha Thicknessb Angle�

FHP

�L 10.0mm (0.�8") 5.5mm (0.��") 40˚

4L 1�.0mm (0.50") 8.0mm (0.�1") 40˚

5L 17.0mm (0.66") 9.0mm (0.�8") 40˚

Multiple

A 1�.7mm (0.50") 8.0mm (0.�1") 40˚

B 16.7mm (0.66") 10.7mm (0.41") 40˚

C ��.�mm (0.88") 1�.5mm (0.5�") 40˚

D ��.0mm (1.�5") �0.0mm (0.75") 40˚

E 40.0mm (1.50") �5.5mm (0.91") 40˚

�5

Sizemark�L 150

Multiply outside length in inches by 10 (15” × 10=150)

Belt type

A 50

Belt inside length in inches

Belt type

StandardSizes ※These sizes are in conformity to RMA.

Type Sizecode

�L150、 160、 170、 180、 190、 �00、 �10、 ��0、 ��0、 �40、 �50、 �60、 �70、 �80、 �90、 �00、�10、 ��0、 ��0、 �40、 �50、 �60、 �70、 �80、 �90、 400、 410、 4�0、 4�0、 440、 450、 460、470、 480、 490、 500、 510、 5�0、 5�0、 540、 550、 560、 570、 580、 590、 600、 610、 6�0

4L

170、 180、 190、 �00、 �10、 ��0、 ��0、 �40、 �50、 �60、 �70、 �80、 �90、 �00、 �10、 ��0、��0、 �40、 �50、 �60、 �70、 �80、 �90、 400、 410、 4�0、 4�0、 440、 450、 460、 470、 480、490、 500、 510、 5�0、 5�0、 540、 550、 560、 570、 580、 590、 600、 610、 6�0、 6�0、 640、650、 660、 670、 680、 690、 700、 710、 7�0、 7�0、 740、 750、 760、 770、 780、 790、 800、810、 8�0、 8�0、 840、 850、 860、 870、 880、 890、 900、 910、 9�0、 9�0、 940、 950、 960、970、 980、 990、 1000

5L

��0、 �40、 �50、 �60、 �70、 �80、 �90、 �00、 �10、 ��0、 ��0、 �40、 �50、 �60、 �70、 �80、�90、 400、 410、 4�0、 4�0、 440、 450、 460、 470、 480、 490、 500、 510、 5�0、 5�0、 540、550、 560、 570、 580、 590、 600、 610、 6�0、 6�0、 640、 650、 660、 670、 680、 690、 700、710、 7�0、 7�0、 740、 750、 760、 770、 780、 790、 800、 810、 8�0、 8�0、 840、 850、 860、870、 880、 890、 900、 910、 9�0、 9�0、 940、 950、 960、 970、 980、 990、 1000

A

�0、 �1、 ��、 ��、 �4、 �5、 �6、 �7、 �8、 �9、 �0、 �1、 ��、 ��、 �4、 �5、 �6、 �7、 �8、�9、 40、 41、 4�、 4�、 44、 45、 46、 47、 48、 49、 50、 51、 5�、 5�、 54、 55、 56、 57、58、 59、 60、 61、 6�、 6�、 64、 65、 66、 67、 68、 69、 70、 71、 7�、 7�、 74、 75、 76、77、 78、 79、 80、 81、 8�、 8�、 84、 85、 86、 87、 88、 89、 90、 91、 9�、 9�、 94、 95、96、 97、 98、 105、 110、 11�、 1�0、 1�8、 1�6、 144、 158、 17�、 180

B

�5、 �6、 �7、 �8、 �9、 �0、 �1、 ��、 ��、 �4、 �5、 �6、 �7、 �8、 �9、 40、 41、 4�、 4�、44、 45、 46、 47、 48、 49、 50、 51、 5�、 5�、 54、 55、 56、 57、 58、 59、 60、 61、 6�、6�、 64、 65、 66、 67、 68、 69、 70、 71、 7�、 7�、 74、 75、 76、 77、 78、 79、 80、 81、8�、 8�、 84、 85、 86、 87、 88、 89、 90、 91、 9�、 9�、 94、 95、 96、 97、 100、 101、 10�、105、 108、 111、 11�、 1�0、 1�4、 1�8、 1��、 1�6、 144、 158、 16�、 17�、 180、 195、 �10、 ��5、 �40、 �55、�70、 �85、 �00、 �15

C51、 60、 68、 75、 81、 85、 90、 96、 105、 109、 11�、 115、 1�0、 1�8、 1�6、 144、 150、 158、 16�、17�、 180、 195、 �10、 ��5、 �40、 �55、 �70、 �85、 �00、 �15、 ��0、 �45、 �60、 �90、 4�0、 450、 480

D1�0、 1�8、 144、 158、 16�、 17�、 180、 195、 �10、 ��5、 �40、 �55、 �70、 �85、 �00、 �15、 ��0、�45、 �60、 �90、 4�0、 450、 480、 540、 600

E 180、 195、 �10、 �40、 �70、 �00、 ��0、 �60、 �90、 4�0、 480、 540、 600

V BELTS (RUBBER)

FRACTIONAL H.P.V-BELTS (FHP) AND MULTIPLE V BELTS

�6

V BELTS (RUBBER)

AGRICULTURAL V BELTS RED S �

1 2 3 4

Construction

1: Rubber impregnated canvas�: Polyester tensile members�: Chloroprene insulation rubber4: Chloroprene compression rubber

Features+Benefits

Designed specifically for reverse-bend dr ive by positioning tensile members closer to the neutral axis and by making the belt thickness a little thinner than that of Conventional Multiple V-Belts A, B, & C Sections.Particularly suitable to agricultural machinery such as combine harvester and garden tiller where belts are often driven with backside idler.

Dimensions

θ θ

b

a

b

a

Type Topwidtha Thicknessb Angle�

SA 1�.7mm (0.5") 7.0mm (0.�7") 40˚SB 16.7mm (0.67") 9.0mm (0.�5") 40˚SC ��.�mm (0.87") 11.0mm (0.4�") 40˚

�

�

ServiceLifeComparison

SpecificDrivingConditions Red-S MultipleV-Belt

reverse-bend drive 450 100oil contamination �80 100

ambient temperature 70°C Degrees

450 100

Numerical values shown above represent indexes with taking the multiple V belts as 100

Sizemark

SA 50

Belt pitch length in inches

Belt type

StandardSizes

Belttype

a×b(mm)

Beltpitchlengthininches

SA 1�.7×7.0 �0 �1 �� 4 �5 �6 �7 �8 �9 �0 �1 �� 4 �5 �6 �7 �8 �9 40 41 4� 4� 44 45 46 47 48 49 50 51 5� 5� 54 55 56 57 58 59 60 61 6� 6� 64 65 66 67 68 69 70 71 7� 7� 74 75 76 77 78 79 80 81 8� 8� 84 85 86 87 88 89 90 91 9� 9� 94 95 96 97 98 99100 10� 105 108 110 11� 115 118 1�0 1�� 1�5 1�8 1�0 1�5 140 145150 155 160 165 170 180 �00 �05 �10 ��0 ��5 ��0 ��5 �40 �50

SB 16.7×9.0 �� 5 �6 �7 �9 �0 �1 �� 4 �5 �6 �7 �8 �9 40 41 4� 4� 44 45 46 47 48 49 50 51 5� 5� 54 55 56 57 58 59 60 61 6� 6� 64 65 66 67 68 69 70 71 7� 7� 74 75 76 77 78 79 80 81 8� 8� 84 85 86 87 88 89 90 91 9� 9� 94 95 96 97 98 99 100 10� 105 108 11011� 115 118 1�0 1�� 1�5 1�8 1�0 1�� 1�5 1�8 140 145 150 155 160165 170 180 190 �00 �10

SC ��.�×11.0 �5 �9 40 4� 44 45 46 47 48 49 50 51 5� 5� 54 55 56 57 58 59 60 6� 6� 64 65 66 67 68 69 70 7� 7� 74 75 76 77 78 79 80 81 8� 85 86 87 88 89 90 94 95 96 99 100 10� 105 108 110 11� 115 118 1�0 1�� 1�5 1�8 1�01�4 1�7 1�9 140 145 150 167 175

Outside length

Pitch length

Inside length

�7

1 2 3 4

5

Construction

1: Rubber impregnated canvas�: Aramid tensile members�: Chloroprene insularion rubber4: Fiber loaded chloroprence rubber5: Chloroprene compression rubber

Features+Benefits

The Series W800 has heat and flex resistance superior to any other V belts, which makes it a top-end V belt for the agricultural machinery use enabling high-load power transmission. You can be assured to use this V belt under harsh environments.

Dimensions

θ θ

b

a

b

a


SA 1�.7mm (0.5") 7.0mm (0.�7") 40˚SB 16.7mm (0.67") 9.0mm (0.�5") 40˚SC ��.�mm (0.87") 11.0mm (0.4�") 40˚

Sizemark

SA 50


Belt type

StandardSizes

Belttype a×b(mm) Beltpitchlengthininches

SA1�.7

× 7.0

�7,�8,�9,�0,�1,��,��,�4,�5,�6,�7,�8,�9,40,41, 4�,4�,44,45,46,47,48,49,50,51,5�,5�,54,55,56, 57,58,59,60,61,6�,6�,64,65,66,67,68,69,70,71, 7�,7�,74,75,76,77,78,79,80,81,8�,8�,84,85,86, 87,88,89,90,91,9�,9�,94,95,96,97,98,99,100

SB16.7

× 9.0

�7,�8,�9,�0,�1,��,��,�4,�5,�6,�7,�8,�9,40,41, 4�,4�,44,45,46,47,48,49,50,51,5�,5�,54,55,56, 57,58,59,60,61,6�,6�,64,65,66,67,68,69,70,71, 7�,7�,74,75,76,77,78,79,80,81,8�,8�,84,85,86, 87,88,89,90,91,9�,9�,94,95,96,97,98,99,100,10�,105,108,110,11�,115,118,1�0,1��,1�5,1�8,1�0,1��,1�5,1�8,140,145,150,155,160,165,170,180,190,�00

SC��.7

× 11.0

(40),(4�),(44),(45),(46),(47),48,(49),50,51,5�, 5�,54,55,56,57,58,59,60,6�,6�,64,65,66,67,68, 69,70,7�,7�,74,75,76,77,78,79,80,81,8�,85,86, 87,88,89,90,94,95,96,99,100,10�,105,108,110, 11�,115,118,1�0,1��,1�5,1�8,1�0,1��,1�5,1�8, 140,14�,145,148,150,155,160,165,170,180,190, �00

Making full use of the capabilities of agriculturalmachineryAs the agricultural machinery increasingly enhances its performance and functions, the quality required for V belts used in the agricultural machinery is going upscale.On fine quality market, there are cases where the agricultural machinery should use more than the RED-S� in order to deliver the thorough functions. Now, we at BANDO launch the Series W800 of the highest quality among V belts (Series W) for the agricultural machinery use on the fine quality market.

FeaturesComparison

StandardVbelt RED-S� W800

Power transmission capability

100 150 �00

Service life against reverse bending

100 450 1800

Service life against shock

100 150 450

※Numerical values shown above represent indexes when taking the standard V belt as 100.

V BELTS (RUBBER)

AGRICULTURAL V BELTS W800

�8

V BELTS (RUBBER)

DOUBLE (HEXAGONAL) V-BELTS

1 � 4�

Construction

1: Rubber impregnated special woven canvas�: Polyester tensile members�: Chloroprene insulation rubber4: Chloroprene compression rubber

Features+Benefits

Designed for reverse-bend serpentine drives by covering the belt with special woven fabric.New Cross Section for maintaining proper belt position in pulley groove even in the case of extreme reverse-bend drives.Due to greater flexibility created by the special woven fabric as well as to the New Cross Section, service life has increased by about 40% over that of traditional double V-Belts.

Dimensions

aa

bb

θ θ

Effectivepitch line

Type a(mm) b(mm) �

AA 1�.5 10.�

40˚BB 16.5 1�.5

CC ��.0 18.0

�

�

�

Sizemark

BB 100

Effective pitch length in inches

Belt type

Typical reverse-bend serpentine drive

StandardSizes

Type Sizenumber(Effectivepitchlengthininches)

AA 50 5� 56 60 6� 67 71 75 80 85 90 95 100106 11� 118 1�5 1�� 140

BB 60 6� 67 71 75 80 85 90 95 100 106 11� 1181�5 1�� 140 150 160 170 180 190 �00 �1� ��4 ��6 �50

CC 1�� 140 150 160 170 180 190 �00 �1� ��4 ��6 �50 �65�80 �00

※These sizes are in conformity to JIS

New cross section

Conventional cross section

�9

45

2

3

1

Construction

1: Rubber impregnated canvas�: Polyester tensile members�: Chloroprene insulation rubber4: Special lateral reinforcing cord5: Chloroprene compression rubber

Features

High horsepower ratingRequires about 1/� of the space needed by traditional Multiple V Belt drive.Long lifeHigh heat and oil resistanceLength stability. A matched set of Bando Power Ace for multiple belt drives retains superior uniformity under tension. A Bando matched set remains perfectly matched even after long periods of storage.Power Ace raised crookedness nature by making texture of canvas into 1�0 degrees instead of 90 degrees of conventional V-belt.

Power Ace Outer Jacket.

Conventional V-belt Outer Jacket.

�

�

�

�

�

Dimensions

θ

b

a


�V 9.5mm (0.�8") 8.0mm (0.��") 40˚5V 16.0mm (0.6�") 1�.5mm (0.54") 40˚8V �5.5mm (1.0") ��.0mm (0.88") 40˚

Sizemark

5V 1�50

Effective outside length in inches × 10 (1�5” × 10=1�50) (�.175m)

Belt type

Pulley

Use RMA Engineering Standards recommended pulley groove dimensions,

IP-�� (Specifications for Drives Using Narrow Multiple V-BELTS).

V BELTS (RUBBER)

POWER ACE

3V 5V 8V

A B C D Em

m0.8（

″23.0）

mm5 .31

″45. 0（）

mm0. 32

″88 .0（

） 9.5mm（0.38″） 16.0mm（0.62″） 25.5mm（1.0″）

38.0mm（1.50″） 31.7mm（1.25″） 22.2mm（0.88″）16.7mm（0.66″） 12.7mm（0.50″）

mm0.32

″1 9.0（）

mm0 .91

″5 7.0（）

mm5.31

″35.0（）

mm3.01

（″14.0）

mm0.8

（″13.0）

�0

V BELTS (RUBBER)

POWER ACEThe superior power transmission capacity of the Bando narrow Power Ace® V-belts allows for drive designs with smaller components reducing machine space and cost. The higher efficiency of the Power Ace® V-belts will also result in decreased operating costs.Just three types of Bando Power Ace ideally cover all five sections of multiple V-belts. For multiple or single dr ives, the �V replaces A, and B sections; the 5V replaces C and D sections; and the 8Vreplaces D and E sections.

StandardSizes ※These sizes are in conformity to RMA.

BeltnumberEffectiveoutsidelength



mm inch mm inch mm inch

3V2503V2653V2803V3003V3153V3353V3553V3753V4003V4253V450

6�567�71176�80085190�95�

10161080114�

�5.0�6.5�8.0�0.0�1.5��.5�5.5�7.540.04�.545.0

3V4753V5003V5303V5603V6003V6303V6703V7103V7503V8003V850

1�071�701�4614��15�41600170�180�1905�0��159

47.550.05�.056.060.06�.067.071.075.080.085.0

3V9003V9503V10003V10603V11203V11803V12503V13203V1400

��86�41��540�69��845�997�175��5��556

90.095.0

100.0106.011�.0118.01�5.01��.0140.0

5V5005V5305V5605V6005V6305V6705V7105V7505V8005V8505V9005V950

1�701�4614��15�41600170�180�1905�0��159��86�41�

50.05�.056.060.06�.067.071.075.080.085.090.095.0

5V10005V10605V11205V11805V12505V13205V14005V15005V16005V17005V18005V1900

�540�69��845�997�175��5��556�81040644�18457�48�6

100.0106.011�.0118.01�5.01��.0140.0150.0160.0170.0180.0190.0

5V20005V21205V22405V23605V25005V26505V28005V28005V30005V31505V3550

50805�85569059946�5067�1711�76�0800185099017

�00.0�1�.0��4.0��6.0�50.0�65.0�80.0�00.0�15.0��5.0�55.0

8V10008V10608V11208V11808V12508V13208V14008V15008V16008V1700

�540�69��845�997�175��5��556�81040644�18

100.0106.011�.0118.01�5.01��.0140.0150.0160.0170.0

8V18008V19008V20008V21208V22408V23608V25008V26508V28008V3000

457�48�650805�85569059946�5067�1711�76�0

180.0190.0�00.0�1�.0��4.0��6.0�50.0�65.0�80.0�00.0

8V31508V33508V35508V37508V40008V42508V45008V47508V50008V5600

80018509901795�5

1016010795114�01�0651�70014��4

�15.0��5.0�55.0�75.0400.04�5.0450.0475.0500.0560.0

�1

45

2

3

1

Construction

1: Rubber impregnated canvas�: Polyester tensile members�: Chloroprene insulation rubber4: Special lateral reinforcing cord5: Chloroprene compression rubber

Features

High horsepower ratingRequires about 1/� of the space needed by traditional Multiple V Belt drive.Long lifeHigh heat and oil resistanceLength stability. A matched set of Bando Narrow V-Belts for multiple belt drives retains superior uniformity under tension. A Bando matched set remains perfectly matched even after long periods of storage.Compared with Conventional V-belt. Bando Narrow V Belts are thick and realized high load.

StandardSizes

BeltnumberEffectiveinsidelength



mm mm mm

SPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZSPZ

6�0670710760800850900950

1010108011401�001�701�4014�015�01600170018001900�0�0

SPASPASPASPASPASPASPASPASPASPASPASPASPASPASPASPASPASPASPA

7077��80085090095095798�

1000106011�011801�501��014001500160017001800

SPBSPBSPBSPBSPBSPBSPBSPBSPBSPBSPBSPB

1�601�40141015101590169018001900�0�0�150��80�410

�

�

�

�

�

Dimensions

θ

b

a


SPZ 9.5 8.0mm 40˚SPA 1�.5mm 10.0mm 40˚SPB 16.0mm 1�.5mm 40˚SPC �0.0mm 18.0mm 40˚

Sizemark

5V 1�50

Effective outside length in inches multiplied by 10. (1�5” × 10=1�50) (�.175m)

Belt type

Pulley

Use RMA Engineering Standards recommended pulley groove dimensions,

IP-�� (Specifications for Drives Using Narrow Multiple V-BELTS).

V BELTS (RUBBER)

NARROW V BELTS SP-TYPE

��

V BELTS (RUBBER)

VARIABLE SPEED BELTS

1 3 2 4 5

Construction

1: Rubber impregnated canvas�: Polyester tensile members�: Chloroprene insulation rubber4: Chloroprene compression rubber5: Rubber impregnated canvas

Features+Benefits

FlexibilityCog pattern gives greater flexibility resulting in efficient heat dissipation.High power transmission capacityStrong tensile members and transverse modulus provide high horsepower rating.High heat and oil resistance.Wide range of speed ratios.

(1)StandardSizes

Standard belt profiles are shown in Fig.1 and sizes are listed in Fig.�

Dimensions

α

a

b

Sizemark

850 VA

Belt type

Nominal number (Pitch length in mm)

�

�

�

�

Fig.1StandardProfiles

Type VA VB VC VD VE

Thickness (b mm) 8.5 10 11.5 1�.5 16Top width (a mm) �5 �1 41 5� 66

Pulley Groove Angle (�˚) �0~�4

Fig.2StandardSizes

NominalNo.

VA VB VC VD VENominal

No.VA VB VC VD VE

560 � 1000 � � � �600 � 10�0 � �615 � 1060 � � � �6�0 � � 1090 � � �650 � � 11�0 � � � � �670 � � 1150 � � �690 � � 1180 � � � � �710 � � � 1��0 � � �7�0 � � � 1�50 � � � �750 � � � 1�80 � � �775 � � � 1��0 � � �800 � � � � 1�60 � � �8�5 � � � � 1400 � � �850 � � � � 1450 � � �875 � � � 1500 � � �900 � � � � 1550 � � �9�5 � � � 1600 � � �950 � � � � 1700 � �975 � � � 1800 � �

(2)Semi-StandardSizes

Semi-standard profiles are available within the range of top width and pulley groove angles shown in Fig.�. Belt lengths are as per Fig.�

Dimensions

α

a

b

Sizemark

850 VA ��

Pulley groove angleBelt top width (mm)Belt typeNominal number (Pitch length in mm)

Fig.3Semi-StandardProfiles

Type VA VB VC VD VE

Thickness (b mm) 8.5 10 11.5 1�.5 16Top width (a mm) 16~�� 0~�8 �4~45 �0~54 �7~67

Pulley Groove Angle � ��~�8

��

V COGGED BELTS (VC)

2

1

Construction

1: Polyester tensile members�: Polyurethane compression section.

Features

Space saving: Pulleys as small as 0.6" OD can be used.Clean operation: No "black rubber dust" problem.High oil resistance.

Dimensions

a

θ b


VC�L 6.5mm (0.�5") 4.0mm (0.16") 40˚6 6.0mm (0.�4") 4.0mm (0.16") 40˚

DC 6 6.0mm (0.�4") 4.0mm (0.16") 40˚

StandardSizes

Type BeltnumberOutsidelength

BeltnumberOutsidelength



mm inch mm inch mm inch mm inch

VC2L

2L0802L0902L1002L1102L120

�0�.��8.6�54.0�79.4�04.8

8.09.0

10.011.01�.0

2L1302L1402L1502L1602L170

��0.��55.6�81.0406.44�1.8

1�.014.015.016.017.0

2L1802L1902L2002L2202L240

457.�48�.6508.0558.8609.6

18.019.0�0.0��.0�4.0

2L2602L2802L3002L340

660.4711.�76�.086�.6

�6.0�8.0�0.0�4.0

VC6

VC6X207VC6X220VC6X232VC6X250VC6X260VC6X261VC6X280VC6X289VC6X297VC6X300VC6X315VC6X320VC6X330VC6X340VC6X343VC6X345

�07.0��0.0��.0�50.0�60.0�61.0�80.0�89.0�97.0�00.0�15.0��0.0��0.0�40.0�4�.0�45.0

8.18.79.19.8

10.�10.�11.011.411.711.81�.41�.61�.01�.41�.51�.6


�49.0�50.0�60.0�70.0�80.0�81.0�90.0400.0407.0410.0414.04�0.04�0.04��.0440.0444.0

1�.71�.814.�14.614.9615.015.415.716.016.116.�16.516.917.017.�17.5


450.0460.0466.0470.0480.0485.0490.0500.0511.05�0.05�0.0540.0550.0561.0587.0600.0

17.718.118.�18.518.919.119.�19.7�0.1�0.5�0.9�1.��1.7��.1��.1��.6

VC6X613VC6X628VC6X650VC6X663VC6X700VC6X713VC6X730VC6X750VC6X760VC6X764VC6X800VC6X821VC6X850VC6X866

61�.06�8.0650.066�.0700.071�.07�0.0750.0760.0764.0800.08�1.0850.0866.0

�4.1�4.7�5.6�6.1�7.6�8.1�8.7�9.5�9.9�1.1�1.5��.��.5�4.1

DC6

DC6X200DC6X210DC6X230DC6X240DC6X250DC6X260DC6X270

�00.0�10.0��0.0�40.0�50.0�60.0�70.0

7.98.�9.19.49.8

10.�10.6


�77.0�80.0�90.0�00.0�10.0�15.0��0.0

10.911.011.411.81�.�1�.41�.6


��0.0�40.0�45.0�50.0�60.0�65.0�70.0

1�.01�.41�.61�.814.�14.414.6

VC6X380VC6X390VC6X400VC6X450VC6X500VC6X540

�80.0�90.0400.0450.0500.0540.0

15.015.415.717.719.7�1.�

�

�

�

DOUBLE COGGED V BELTS (DC)

2

1

Sizemark

(VC2Ltypes)

�L 080

Outside length in inches Multiplied by 10 (8×10=080)

�L type cogged V belts

(VC-6type)

VC 6x �50

Outside length in mm

6 type

Cogged V belts

(DC-6type)

DC 6x �50


6 type

Double cogged V belts

V BELTS (POLYURETHANE)

BANCOLLAN V BELTS

�4

V BELTS (POLYURETHANE)

BANFLEX

3

2

1

Construction

1: Polyurethane�: Polyester tensile members�: Polyurethane compression section.

Sizemark

5M 1000

Effective outside length in mm

Belt type

StandardSizes

Effectiveoutsidelength Type Effectiveoutsidelength Type Effectiveoutsidelength Type

mm inch 3M 5M 7M 11M mm inch 3M 5M 7M 11M mm inch 3M 5M 7M 11M180 7.1 � 4�7 17.� � � 10�0 40.6 � � �

185 7.� � 450 17.7 � � 1060 41.7 � � �

190 7.5 � 46� 18.� � � 1090 4�.9 � � �

195 7.7 � 475 18.7 � � 11�0 44.1 � � �

�00 7.9 � 487 19.� � � 1150 45.� � � �

�06 8.1 � 500 19.7 � � � 1180 46.5 � � �

�1� 8.� � 515 �0.� � � � 1��0 48.0 � � �

�18 8.6 � 518 �0.4 � 1�50 49.� � � �

��4 8.8 � 5�0 �0.9 � � � 1�80 50.4 � � �

��0 9.1 � 545 �1.5 � � � 1��0 5�.0 � � �

��6 9.� � 560 ��.0 � � � 1�60 5�.5 � � �

�4� 9.6 � 580 ��.8 � � � 1400 55.1 � � �

�50 9.8 � 600 ��.6 � � � 1450 57.1 � � �

�58 10.� � 615 �4.� � � � 1500 59.1 � � �

�65 10.4 � 6�0 �4.8 � � � 1550 61.0 � �

�7� 10.7 � 650 �5.6 � � � 1600 6�.0 � �

�80 11.0 � � 670 �6.4 � � � 1650 65.0 � �

�90 11.4 � � 690 �7.� � � � 1700 66.9 � �

�00 11.8 � � 710 �8.0 � � � � 1750 68.9 � �

�07 1�.1 � � 7�0 �8.7 � � � � 1800 70.9 � �

�15 1�.4 � � 750 �9.5 � � � � 1850 7�.8 � � �

��5 1�.8 � � 775 �0.5 � � � 1900 74.8 � �

��5 1�.� � � 800 �1.5 � � � 1950 76.8 � �

�45 1�.6 � � 8�5 ��.5 � � � �000 78.7 � �

�55 14.0 � � 850 ��.5 � � � �060 81.1 � �

�65 14.4 � � 875 �4.4 � � � �1�0 8�.5 � �

�75 14.8 � � 900 �5.4 � � � �180 85.8 � �

�87 15.� � � 9�5 �6.4 � � � ��40 88.� � �

400 15.7 � � 950 �7.4 � � � ��00 90.6 � �

41� 16.� � � 975 �8.4 � � �

4�5 16.7 � � 1000 �9.4 � � �

Features+Benefits

Space savingHigh horsepower rating and small pulley requirements permit compact designs.Smooth runningBelt runs very smoothly because of ground side wall.High speed driveBecause they are very light weight, Banflex belts can be driven at high speeds without excessive vibration or wear.

Dimensions

a

b

Type Topwidtha Thicknessb

�M �.0mm (0.1�") �.1mm (0.08")5M 5.0mm (0.�0") �.�mm (0.1�")7M 7.0mm (0.�8") 5.�mm (0.�0")11M 11.0mm (0.4�") 6.9mm (0.�8")

�

�

�

�5

1

3 42

Construction

1: Polyurethane�: Tie band�: Polyester tensile members4: Polyurethane compression section

Features+Benefits

Smooth high speed drive up to 1�,000 feet/min.Low vibration without spin or jump off.Space savingSmall pulleys and high speed ratios make it possible to design compact and lightweight machines.Ideal for horizontal drive.High oil and ozone resistance.

StandardSizes

Outsidelength Type Outsidelength Type Outsidelength Type

mm inch 5MS 7MS 11MS mm inch 5MS 7MS 11MS mm inch 5MS 7MS 11MS�80 11.0 � 580 ��.8 � � 1180 46.5 � � �

�90 11.4 � 600 ��.6 � � 1��0 48.0 � � �

�00 11.8 � 615 �4.� � � 1�50 49.� � � �

�07 1�.1 � 6�0 �4.8 � � 1�80 50.4 � � �

�15 1�.4 � 650 �5.6 � � 1��0 5�.0 � � �

��5 1�.8 � 670 �6.4 � � 1�60 5�.5 � � �

��5 1�.� � 690 �7.� � � 1400 55.1 � � �

�45 1�.6 � 710 �8.0 � � � 1450 57.1 � � �

�55 14.0 � 7�0 �8.7 � � � 1500 59.1 � � �

�65 14.4 � 750 �9.5 � � � 1550 61.0 � �

�75 14.8 � 775 �0.5 � � � 1600 6�.0 � �

�87 15.� � 800 �1.5 � � � 1650 65.0 � �

400 15.7 � 8�5 ��.5 � � � 1700 66.9 � �

41� 16.� � 850 ��.5 � � � 1750 68.9 � �

4�5 16.7 � 875 �4.4 � � � 1800 70.9 � �

4�7 17.� � 900 �5.4 � � � 1850 7�.8 � � �

450 17.7 � 9�5 �6.4 � � � 1900 74.8 � �

46� 18.� � 950 �7.4 � � � 1950 76.8 � �

475 18.7 � 975 �8.4 � � � �000 78.7 � �

487 19.� � 1000 �9.4 � � � �060 81.1 � �

500 19.7 � � 10�0 40.6 � � � �1�0 8�.5 � �

515 �0.� � � 1060 41.7 � � � �180 85.8 � �

5�0 �0.9 � 1090 4�.9 � � � ��40 88.� � �

545 �1.5 � � 11�0 44.1 � � � ��00 90.6 � �

560 ��.0 � � 1150 45.� � � �

�

�

�

�

�

Dimensions

a

p

θ b

TypeTopwidtha Thicknessb

PitchPmm inch mm inch

5MS� ribs 9.8 0.�9

�.� 0.1�5.�mm (0.�1")� ribs 15.1 0.59

7MS� ribs 15.6 0.61

5.� 0.�18.5mm (0.��")� ribs �4.1 0.95

11MS� ribs �4.4 0.96

7.0 0.�81�.�mm (0.5�")� ribs �7.6 1.48

Sizemark

7 - 5MS 800


Belt type

Number of ribs

※More than 4 ribs, we combinate � or � ribs belts as following.

NumberofribsStandard

combinationNumberofribs

Standardcombination

4 �+� 8 �+�+�5 �+� 9 �+�+�6 �+� 10 �+�+�+�7 �+�+� 1� �+�+�+�

BANDED BELTS (POLYURETHANE)

BANFLEX SCRUM

�6

BANDED BELTS (RUBBER)

POWER SCRUM

1 2 3 4 5

Multiple V Belt type

Construction

1: Tie-band�: Polyester tensile members�: Chloroprene insulation rubber4: Rubber impregnated canvas5: Chloroprene compression rubber.

Features+Benefits

Permanent matched set.No lateral whip, spin or turn over.Deep pulley grooves are not required even on horizontal drives.Heat and oil resistant.

Sizemark

(MultipleVtype)

5 C 100


Type

Number of belts in band

(PowerAcetype)

5 - �V 1000

Outside length in inches × 10

(100" × 10=1000)

Type

Number of belts in band

�

�

�

�

4 531 2

Power Ace type

Dimensions

a e

b

θ

TypeTopwidthof

onebeltaThicknessb Angle�

Pitchbetweentwobeltse

A 1�.0mm (0.5") 1�.0mm (0.5") 40˚ 1�.0mm (0.5")B 17.0mm (0.66") 1�.0mm (0.5") 40˚ 1�.0mm (0.5")C 1�.0mm (0.5") 1�.0mm (0.5") 40˚ 1�.0mm (0.5")D 1�.0mm (0.5") 1�.0mm (0.5") 40˚ 1�.0mm (0.5")�V 1�.0mm (0.5") 1�.0mm (0.5") 40˚ 1�.0mm (0.5")5V 1�.0mm (0.5") 1�.0mm (0.5") 40˚ 1�.0mm (0.5")8V 1�.0mm (0.5") 1�.0mm (0.5") 40˚ 1�.0mm (0.5")

※More than 6 ribs, we combinate �, �, 4 or 5 ribs belts as following.

Numberofribs Standardcombination

Numberofribs Standardcombination

- - 11 4+�+4� � 1� 4+4+4� � 1� 4+5+44 4 14 5+4+55 5 15 5+5+56 �+� 16 4+4+4+47 �+4 17 4+4+5+48 4+4 18 5+4+4+59 4+5 19 5+4+5+510 5+5 �0 5+5+5+5

�7

StandardSizes

Power Ace

Type BeltnumberOutsidelength




3V

�V 400�V 4�5�V 450�V 475�V 500�V 5�0�V 560�V 600

1,0161,0801,14�1,�071,�701,�461,4��1,5�5

40.04�.545.047.550.05�.056.060.0

�V 6�0�V 670�V 710�V 750�V 800�V 850�V 900�V 950

1,6001,70�1,80�1,905�,0��,159�,�86�,41�

6�.067.071.075.080.085.090.095.0

�V1000�V1060�V11�0�V1180�V1�50�V1��0�V1400

�,540�,69��,845�,997�,175�,�5��,556

100.0106.011�.0118.01�5.01��.0140.0

5V

5V 6005V 6�05V 6705V 7105V 7505V 8005V 8505V 9005V 9505V10005V1060

1,5�41,6001,70�1,80�1,905�,0��,159�,�86�,41��,540�,69�

60.06�.067.071.075.080.085.090.095.0

100.0106.0

5V11�05V11805V1�505V1��05V14005V15005V16005V17005V18005V19005V�000

�,845�,997�,175�,�5��,556�,8104,0644,�184,57�4,8�65,080

11�.0118.01�5.01��.0140.0150.0160.0170.0180.0190.0�00.0

5V�1�05V��405V��605V�5005V�6505V�8005V�0005V�1505V��505V�550

5,�855,6905,9946,�506,7�17,11�7,6�08,0018,5099,017

�1�.0��4.0��6.0�50.0�65.0�80.0�00.0�15.0��5.0�55.0

8V

8V10008V10608V11�08V11808V1�508V1��08V14008V15008V16008V1700

�,540�,69��,845�,997�,175�,�5��,556�,8104,0644,�18

100.0106.011�.0118.01�5.01��.0140.0150.0160.0170.0

8V18008V19008V�0008V�1�08V��408V��608V�5008V�6508V�8008V�000

4,57�4,8�65,0805,�855,6905,9946,�506,7�17,11�7,6�0

180.0190.0�00.0�1�.0��4.0��6.0�50.0�65.0�80.0�00.0

8V�1508V��508V�5508V�7508V40008V4�508V45008V47508V50008V5600

8,0018,5099,0179,5�5

10,16010,79511,4�01�,0651�,70014,��4

�15.0��5.0�55.0�75.0400.04�5.0450.0475.0500.0560.0

V Belt type

TypeMinimumeffective

pitchlengthMaximumeffective

pitchlength

mm inch mm inchA 1,5�4 60 5,080 �00B 1,5�4 60 8,890 �50C �,540 100 8,890 �50D �,540 100 8,890 �50

※These sizes are in conformity to JIS.

Recommended Pulley Groove Pitch

P

TypePulleypitchP

mm inch

A 15.0 0.59B 19.0 0.75C �5.5 1.00D �7.0 1.46

TypePulleypitchP

mm inch

�V 10.� 0.415V 17.5 0.698V �8.6 1.1�

BANDED V BELTS (RUBBER)

POWER SCRUM

�8

V RIBBED BELTS (RUBBER)

POLYBANROPE

1 2 3 4

Construction

1: Chloroprene backside rubber�: Polyester tensile members�: Chloroprene compression rubber4: Rubber impregnated canvas (except J Type)

Features+Benefits

High horsepower rating.BANDO POLYBANROPE have a �0-50% higher HP rating than multiple V belts.Space savingPulleys with outside diameters as small as 0.8" can be used. (Type J)Lower vibration than flat belts.Comparable to flat belts.Oil and heat resistant.

StandardSizes

Type beltnumberEffectivelength

beltnumberEffectivelength

beltnumberEffectivelength


J

108J117J1��J140J159J180J190J199J�10J��0J��4J��5J�40J

�74.��97.��5.��55.640�.9457.�48�.6505.55��.4558.8569.0596.9609.0

10.811.71�.�14.015.918.019.019.9�1.0��.0��.4��.5�4.0

�45J�51J�60J�78J�80J�00J�07J�15J��J��0J��7J�40J�50J

6��.�6�7.5660.4706.1711.�76�.0779.8800.18�0.48�8.�856.086�.6889.0

�4.5�5.1�6.0�7.8�8.0�0.0�0.7�1.5��.��.0��.7�4.0�5.0

�60J�70J�80J�90J400J4�0J450J460J470J474J490J5�0J5�0J

114.49�9.8965.�990.0

1016.0109�.�114�.01168.4119�.81�04.01�44.61��0.81�46.�

�6.0�7.0�8.0�9.040.04�.045.046.047.047.449.05�.05�.0

L

�14L�41L�60L�77L�90L��7L��7L�44L�47L�48L�58L�6�L�76L�86L�95L

54�.661�.1660.470�.67�6.68�0.6856.087�.8881.488�.9909.�919.5955.0980.4

100�.�

�1.4�4.1�6.0�7.7�9.0��.7��.7�4.4�4.7�4.8�5.8�6.��7.6�8.6�9.5

410L415L417L4��L470L490L515L5�0L540L570L600L615L650L680L690L

1041.41054.11059.�1074.4119�.81�44.61�08.11�46.�1�71.61447.815�4.0156�.11651.017�7.�175�.6

41.041.541.74�.�47.049.051.55�.054.057.060.061.565.068.069.0

7�0L750L780L815L8�5L865L9��L975L1016L106�L11�0L1�00L1480L

1854.�1905.01981.��070.1�1�0.9�197.1��67.��476.5�580.6�700.0�844.8�048.0�759.�

7�.075.078.081.58�.586.59�.�97.5

101.6106.�11�.01�0.0148.0

M

417M557M6�0M65�M756M

1059.�1414.81600.�1656.119�0.�

41.755.76�.065.�75.6

851M878M990M

1150M1��0M

�161.5��0.1�514.6�9�1.0�1�4.�

85.187.899.0

115.01��.0

1�10M1470M1900M

��7.4�7��.848�6.0

1�1.0147.0190.0

�

�

�

�

Dimensions

P

b

θ

TypeThicknessb

Angle�Pitch(p)

mm inch mm inchJ 4.0 0.16 40˚ �.4 0.09�L 9.0 0.�4 40˚ 4.8 0.185M 16.5 0.65 40˚ 9.6 0.�70

Sizemark

410 L 5

Number of ribs

Type

Effective pitch length in inches × 10 (41" × 10=410)

�9

1 2 3

Construction

1: Polyurethane�: Polyamid tensile members�: Polyurethane

Features+Benefits

Suitable to fixed center distance applications.Belt's elasticity allows easy installation on fixed center distance pulleys without tools.Withstands high shock load.Polyamid tensile members protect belts from shock load damage, making them well-suited for small machines and other high speed/high shock load applications.High speed.Space savingSmall pulley requirement permits smaller, more compact designs.

StandardSizes

Type BeltnumberPitchlength

BeltnumberPitchlength

BeltnumberPitchlength


H(Polyurethane)

6�H71H80H85H90H95H

100H106H11�H 118H1�5H

�0�.��15.9��8.8�41.��54.0�69.��85.4�99.7�17.5

8.08.59.09.5

10.010.611.�11.81�.5

1��H1�6H140H147H150H160H170H180H190H

��5.��45.4�55.6�7�.4�81.0406.44�1.8457.�48�.6

1�.�1�.614.014.715.016.017.018.019.0

�00H�14H�15H��1H��0H��5H�04H

508.054�.�547.056�.0584.�596.977�.�

�0.0�1.4�1.5��.1��.0��.5�0.4

J(Polyurethane)

81J8�J85J90J95J97J99J

108J116J117J1��J1�5J1�0J

�05.��09.1�15.9��8.6�41.��47.��51.��7�.8�9�.5�97.0�09.9�17.5��0.0

8.18.�8.59.09.59.79.9

10.811.611.71�.�1�.51�.0

1�5J1�9J14�J145J15�J160J171J175J180J189J194J�01J��4J

�4�.8�51.5�6�.��68.��89.�406.44�1.�44�.�457.�480.�49�.8510.5594.0

1�.51�.814.�14.515.�16.017.017.418.018.919.4�0.1��.4

��6J�50J�60J�64J�80J�00J�1�J�18J��J

599.46�0.8660.4670.0711.�76�.079�.5807.7819.�

��.6�4.8�6.0�6.4�8.0�0.0�1.��1.8��.�

Some sizes are not equal for actual pitch length (inch).

�

�

�

�

Dimensions

(H type)

p

θ a

b

(J type)P

ab

θ

TypePitch

PTotalthickness

aRibthickness

bAngle

�

H1.6mm (0.06�")

�.5mm (0.098")

1.0mm (0.0�9")

40˚

J�.4mm (0.094")

4.0mm (0.157")

�.�mm (0.091")

40˚

Sizemark

108 J 5

Number of ribs

Type

Nominal Length

V RIBBED BELTS (POLYURETHANE)

BANCOLLAN POLYBANROPE

40

ROUND BELTS (POLYURETHANE)

BANCOLLAN ROUND BELTS (Seamless Type)

Construction

Polyurethane without tensile members

StandardSizes

Type22mmdiameter

Type33mmdiameter

Type44mmdiameter

Type55mmdiameter

Beltlength Beltlength Beltlength Beltlength

mm inch mm inch mm inch mm inch

91.0100.0107.011�.01�0.01�5.01�0.01�4.01�6.0140.0145.0147.015�.0160.0170.0180.018�.0190.0�00.0�1�.0��7.0��9.0�44.0�50.0�7�.0�90.0 444.0 470.0

�.58�.944.�14.414.7�4.9�5.1�5.�85.�55.515.715.795.986.�06.697.097.�07.487.878.�98.949.419.619.84

10.7511.4�17.4818.50

115.01�0.01��.01�8.0140.0150.015�.0155.0160.0165.0170.017�.0180.018�.0190.0�00.0�04.0�1�.0��.0��0.0��6.0�40.0�50.0�60.0�75.0�8�.0�85.0�90.0�05.0�08.0��0.0�47.0�56.0�6�.0�76.0�90.0400.04�0.0441.0450.0645.0

4.5�4.7�5.�05.4�5.515.916.0�6.106.�06.506.696.777.097.177.487.878.0�8.�98.789.069.�99.459.84

10.�410.8�11.1011.��11.4�1�.011�.1�1�.991�.6614.0�14.�914.8015.�515.7516.9�17.�617.7��5.�9

140.0160.0170.0175.0�00.0�1�.0��5.0��0.0��5.0�50.0�54.0�58.0�64.0�75.0�84.0�85.0�90.0�00.0�05.0�16.0��.0��.0��5.0�46.0�61.0�67.0�70.0�74.0�77.0�85.0�90.0415.0474.0500.0540.0

5.516.�06.696.897.878.�98.869.069.�59.84

10.0010.1610.�910.8�11.1811.��11.4�11.811�.011�.441�.7�1�.071�.191�.6�14.�114.4514.5714.7�14.8415.1615.�516.�418.6619.69�1.�6

�00.0�10.0��0.0��5.0��0.0�47.0�48.0�50.0�75.0�90.0�00.0�05.0�10.0��0.0�45.0�48.0�6�.0�75.0�80.0�84.540�.04��.0440.0460.0685.0

7.878.�78.668.869.069.7�9.769.84

10.8�11.4�11.811�.011�.�01�.991�.581�.7014.�914.7614.9615.1815.8�16.6117.��18.11�6.97

Features+Benefits

Low starting torqueExcellent flexibility, provides smooth slip-free starts even in low temperatures.Easy installationEasy to install by hand.No retensioning needed.Minimal tension decay.High oil and ozone resistance

Sizemark

� × 100

Belt length in mm under no tension force

Type (diameter of round belt in mm)

�

�

�

�

BANCOLLAN (CORDLESS) FLAT BELTS

41

BANCORD ROUND BELTS

Construction


StandardSizes

ROUND Belts

DiameterofBeltmm 1.5 � �.5 � �.5 4 5 6 7 8 9 10 11 1� 15

inch 0.06 0.08 0.10 0.1� 0.14 0.16 0.�0 0.�4 0.�8 0.�1 0.�5 0.�9 0.4� 0.47 0.60

#480Standard � � � � � � � � � � � � � � �

#489highmodulus � � � � � �

Length/rail #480 �00m/roll #489 100m/roll 100m/roll

V Belts


M 10.0mm 5.5mm 40˚A 1�.7mm 8.0mm 40˚B 16.7mm 10.�mm 40˚

Construction


Feature+Benefits

Smooth constant speedThickness tolerance is ± 0.00�0” (0.05mm), so there is virtually no speed variation.Space saving Minimum pulley diameter is 0.�” (5.0mm). This allows high speed ratios.

�

�

BANCORD V BELTS

Features

Simply cut and heat-splice the belt to the required length.

Dimensions

b

a

Sizemark

10 1.0 560

Inside length in mm

Thickness in mm

Width in mm

StandardSizes

a×b(mm) BELTINSIDELENGTH(mm)

10×1.0170~950 (Please contact to us for detail size)

The above belt should be installed at 6% stretch.

ROUND BELTS / V BELTS / FLAT BELTS (POLYURETHANE)

BANCORD (OPEN END TYPE)

4�

FLAT BELTS (RUBBER / POLYURETHANE)

PS BeltsBANDO PS Belts is made of seamless woven fabric. The fabric is coated with various kinds of rubber or polyurethane rubber. This belt is newly developed to meet precision drives such as office automation equipment, computer peripherals and banking machines.

Type*-1 ApplicableperformanceConstruction

Colortone

Availabledimensions*-3

Numberoftensilemember(ply)

MaterialofShapeofsurface*-2 Total

thicknessWidth Insideperimeter

lengthFrontsurface Rearsurface

A-1C Low-torque, high-speed power transmission Weather resistance, cold resistance

1-ply polyesterChloroprene

rubberRough surface

Smooth surface

Black 0.�� ~�00 100~1900

A-1ULow-torque, high-speed power transmission Weather resistance, oil resistance, abrasion resistance

1-ply polyester PolyurethaneRough surface

Smooth surface

White, green

0.�� ~�00 100~1900

A-4ULow-torque, high-speed power transmission Weather resistance, oil resistance, abrasion resistance

1-ply polyester PolyurethaneRough surface

Smooth surface

White, green

0.4 5~�00 180~5700

A-10NMedium-torque, high-speed power transmission Oil resistance, cold resistance

1-ply polyester Nitrile rubberRough surface

Smooth surface

Black 1.0 5~�00 �00~5700

A-13CMedium-torque, high-speed power transmission Weather resistance, cold resistance


rubberRough surface

Smooth surface

Black 1.1 5~�00 �00~5700

A-PMedium-torque, high-speed power transmission (No unraveling from edges)

4-ply polyamideImpregnated chloroprene

rubber

Canvas surface

Canvas surface

Black 1.�*-4

10~�50�00~1000

1000~�700

A-WMedium-torque, high-speed power transmission Quiet operation (No unraveling from edges)

1-ply vinylonCanvas fabric

Canvas surface

Canvas surface

Canvas natural color

�.0 �0~�00 800~5700

B-2CConveyance of light objects such as sheets of paper, tickets, etc. Weather resistance, cold resistance


rubberRough surface

Smooth surface

Black 0.8 5~�00 �50~5700

B-2HConveyance of light objects such as sheets of paper, tickets, etc. Weather resistance, anti-staining properties

1-ply polyesterHypalon rubber

Rough surface

Smooth surface

White 0.8 5~�00 �50~5700

B-2CEConveyance of light objects such as sheets of paper, tickets, etc. Superconductivity (a level of 100�)


rubberCanvas surface

Smooth surface

Black 1.1 10~�00 �50~5700

B-3CConveyance of light objects such as sheets of paper, tickets, etc. Low-torque, high-speed power transmission Weather resistance, cold resistance


rubberRough surface

Smooth surface

Black 0.6 10~�00 �50~5700

B-6NConveyance of light objects such as sheets of paper, tickets, etc. Low-torque, high-speed power transmission Oil resistance, abrasion resistance

1-ply polyester Nitrile rubberRough surface

Smooth surface

Black 1.0 10~�00 �50~5700

C-8CPrecision power transmission and conveyance of light objects on equipment fixed between axes


rubberRough surface

Smooth surface

Black 0.7 �~�00 160~5700

C-16CPrecision power transmission and conveyance of light objects on equipment fixed between axes


rubberRough surface

Smooth surface

Black 0.7 �~�00 160~5700

Z-H250XLow-torque power transmission, conveyance of light objects at high ambient temperatures (i.e., �50Åé or less)

1-ply aromatic amide

Silicon rubber

Mirror surface

Mirror surface

Liver 0.9 10~�00 460~�000

E-8UConveyance of light objects such as banknotes, cards, tickets, etc. on equipment fixed between axes

1-ply polyesterPolyurethane

(Millable)Polished surface

Polished surface

Black0.65 0.8 1.0

8~�00 50~1500

EX-101Conveyance of light objects such as banknotes, cards, tickets, etc. on equipment fixed between axes

1-ply polyesterPolyurethane

(Millable)Mirror surface (Mold surface)

Polished surface

Black0.65 0.8 1.0

8~�00 50~1�50

※-1 Besides types listed above, available types A-1N, A-4C, A-10C, A-1�N, B-�N, B-�UF, B-�N, B-6C, C-8N, C-8U, C-16N, C-16U, and others.※-� Select proper working surface according to your use conditions. Normally, it is recommended to use the smooth surface as the pulley surface.

Besides the surfaces listed above, rough/polished surface and mirror/mirror (polished on one side) are available. For further information, contact us or your representative.※-� Any belt dimensions other than standard ones are available on your request. For any dimensions other than available dimensions listed above, contact us or your representative.※-4 10 mm to (0.15Belt's inside perimeter length) mm

4�

Features

1.Compactdesign Drives are compact because of thin, seamless and flexible belt.2.Smoothrunning Seamless belt can give smooth running with no vibration.3.Maintenancefree Belt does not stretch because of specially treated tension member.4.Energysaver Lightweight and flexible belt minimizes power loss.

�:Optimum �:Suited ×:N/A

Type*-1Tensile

strengthN/10mmwidth

Axialloadatstabilizedextension

N/10mmwide

Min.pulley

diameter

Weight(approx.)g/10mmwideΧ

mlong

Abrasionresistance

Oilresistance

Electricalconductivity

Flameretardance

Ozoneresistance

Majorapplication

A-1C 150 0.5% �0 5 �.5 � � � � � Take-up of tapeDial drivingPrecision gauge drivingAcoustic equipment

••••A-1U 150 0.5% �0 5 �.� � � × � �

A-4U 400 0.5% 45 10 4 � � × � �

Terminal equipment • Communication equipmentCard readerMagnetic disk • Acoustic equipment

•••

A-10N 1000 0.5% 110 15 11 � � � � ×Grinding machine • Textile machineryRouting machine • Washing machineLine printer • Automatic lathe

•••

A-13C 1�50 0.5% 170 �0 1� � � � � �

Vacuum cleaner • Grinding machineRotary burnerTextile machinery

•••

A-P 1400 1% 1�0 �% �10 �% �80

50 11 � � � � �Printing machineAutomatic control device

••

A-W 1700 1% �00 �% 490

�0 9 × � × × �Thread plying machineCigarette making machine

••

B-2C �50 1% �0 �% 50 �% 60

10 9 � � � � �Ticket-issuing machine • Bank terminal machineAutomatic ticket gate • Automatic packaging machineMoney change machine • Cash dispenserBanknote checker • Office equipmentAutomatic checkerFare box • Ticket vending machine • Printing machine

••••••

B-2H �50 1% �0 �% 50 �% 60

10 9 � � × � �

B-2CE �00 1% 60 �% 80 �% 110

�0 1� � � � � �

Sorter • Copying machinePaper conveyance systemCash dispenser

•••

B-3C �80 1% 70 �% 1�0 �% 140

10 7 � � � � �

Copying machine • Motoring amusement machineAutomatic packaging machineMicrofilm equipment

•••

B-6N 600 1% 180 �% �80 �% �60

�5 11 � � � � ×Automatic checkerPrinting machine • Office equipmentOptical reader

•••

C-8C 80 1% 9 �% 15 �% �0

5 8 � � � � �Floppy diskOffice equipment

••

C-16C 160 1% �0 �% �0 �% 40

7 8 � � � � �

Document feederCopying machine • SorterFish detector

•••

Z-H250X 400 1% 1�0 �0 11 × � × � �

Copying machine • Heat sealing machineMeasuring meter • Testing machineLarge-sized facsimile

•••

E-8U -

5% 10 6% 1� 7% 14 8% 16

810/total

thickness 1.0mm

� � � � �

Bank terminal equipmentCash dispenserCard readerOffice equipment

••••

EX-101 -

5% 10 6% 1� 7% 14 8% 16

8 10 � � � � �

Bank terminal equipmentCash dispenserCard readerOffice equipment

••••

Nomenclature of beltB - � C E ① ② ③ ④

※-1 Besides types listed above. available types A-1N, A-4C, A-10C, A-1�N, B-�N, B-�UF, B-�N, B-6C, C-8N, C-8U, C-16N, C-16U and others.① Series name of belt ··· A: Mainly used for high-speed power transmission, B: Mainly used for conveyance of light objects such as sheets of paper, tickets, etc., C: Mainly used

for precision power transmission, Z: Mainly used for conveyance at high temperatures, E: Used for conveyance of light objects② Tensile strength of belt ··· Series A & B: Indicating 1/100 of tensile strength, Series C & E: Indicating 1/10 of tensile strength③ Material of cover ··· C: Chloroprene, N: Nitrile rubber, U: Polyurethane, H: Hypalon rubber④ Additional function ··· E: Electrical conductivity of a level of 100�, F: Certified by Food Sanitation Law and Official Notice No.�0 of Ministry of Health, Labour and Welfare.

※P,W: Special textile fabric

FLAT BELTS (RUBBER / POLYURETHANE)

PS Belts

44

AUTO MOTIVE POWER TRANSMISSION BELTS

AUTOMOTIVE POWER TRANSMISSION BELTS

V-BeltsWrapped type

Cut Edge type (Raw Edge) Type

RAF (laminated type)RPF (cogged type)

V-Ribbed Belts Rib Ace

OHC Synchronous / STS Belts

Features

Sidewallwearresistance Bendingstressresistance Noiselevel

Good Good Excellent

Wraped type

Excellent Good Excellent

RAF

Excellent Excellent Good

RPF

Excellent Excellent Excellent

RIB ACE

Excellent Excellent Good

OHC SYNCHRONOUS BELTS

Excellent Excellent Excellent

OHC STS BELTS

45

DimensionsandavailableSizeRange

BelttypeBandoprofile&Sizecode

Topwidth Thickness Angle Sizerange

V-Belts

FM �000

9.5mm (0.�8") 8.0mm (0.��") 40˚508mm-15�4mm

�0"-60" Outside length

HA 4000

1�.5mm (0.50") 9.5mm (0.�8") 40˚800.1mm-1651mm

�1.5"-65" Outside length

A �000

1�.0mm (0.50") 8.0mm (0.��") 40˚508mm-�0��mm

�0"-80" Inside length

B 5000

17.0mm (0.66") 11.0mm (0.44") 40˚508mm-�0��mm


BC 9000

�0.0mm (0.80") 11.0mm (0.44") 40˚508mm-�540mm


C 7000

��.0mm (0.88") 14.0mm (0.56") 40˚508mm-�540mm


CD 8000

�5.5mm (1.00") 14.0mm (0.56") 40˚508mm-�540mm



Ribpitch Thickness Sizerange

RIB ACE PK �.56mm (0.14") 4.8mm (0.19")�0"-100"

(500mm-�540mm)


Toothpitch Thickness Sizerange

OHC Synchronous Belts

ZA 9.5�5mm (0.�75") 4.10mm (0.16")

Please contact to us

ZB 9.5�5mm (0.�75") 4.50mm (0.18")

ZBS 9.5�5mm (0.�75") 4.89mm (0.19")

YH 8.0mm (0.�15") 5.�mm (0.�1")

ZH 9.5�5mm (0.�75") 5.65mm (0.��")

YU 8.0mm (0.�15") 5.0�mm (0.�0")

RU 9.5�5mm (0.�75") 5.40mm (0.�1")


Toothpitch Thickness Sizerange

OHC STS Belts

S8M 8.0mm (0.�15") 5.�mm (0.�1") Please contact to us

46

APPLICATION OF BANDO POWER TRANSMISSION BELTS IN DIFFERENT INDUSTRIES.

Rib Ace5PK 980Automotive belt

Automotive beltfor busHDPFRaw edge

Variable speed belt for motor bike

CARS & MOTORBIKE

47

CARS & MOTORBIKE

for motor bike Variable speed belt

for Automotive STS belt S8M 560

for Automotive Rib Ace belt 4PK 154�

48

Combine V Belt Red-S� single drive

V/S Belt �9.�4-994

Combine all drives

Video camera TN 10 × 1pc.

printer a copying machine STS 60 S�M5�7

AGRICULTURAL MACHINERY

HOUSEHOLD APPLIANCES

OFFICE EQUIPMENT

49

OTHER MACHINERY

KPS belt S8M115� injection molding

automatic door LSB-U

light conveyance LSB-U with profile

Ventilator Multiple V Belts red B-65

a b c d

50

BANDO POWER TRANSMISSION BELT TROUBLESHOOTING MANUAL

OPERATING AND MAINTENANCE

V-BELT

T h e a c c o m p a ny i n g d i a g r a m s s h ow t h e s i m p l e construction of a belt. Each belt has four components.

a) Cover: A canvas cover is usually wrapped completely around the belt, sometimes only on the top and bottom. It provides the proper amount of traction and protects the internal components from oil, dust and other foreign materials.It also increases belt flexibility.

b) CushionRubber: The material surrounding the Tensile Member. It absorbs the power from the power (pulley) and helps transmit this power to the driven sheave. Its high elasticity allows smooth bending and f lexing over even the smallest pulleys while preventing heat built-up. It is made of synthetic rubber.

c) AdhesionRubber: Sets the tensile cords in the right place and firmly bonds the cords with the cushion rubber.

d) Tensile Member: Cord like material running around the belt. The 'muscles' of the belt, it transmits power from one sheave to the next, (Made of Tetron R)

CONSTRUCTION

b

a

c

d

51

CONSTRUCTION

SYNCHRONOUS-BELT

Also called a "Timing Belt". It consists of four components:

a) RubberBacking: A synthetic rubber layer which gives protection to the tensile member. It is tough and flexible and completely bonded to the tensile member. Its excellent wear resistant backing can also be used for light duty transportation.

b) TensileMember: Made of helically wound glass fiber cord, it is designed to transmit the power. The small diameter cord possesses high tensile strength, low stretch and high resistance to bending fatigue.

c) RubberTeeth: Special synthetic rubber which has high shear strength and adequate hardness. To ensure that the teeth are compatible with the pulley grooves, they are precision made with a highly accurate pitch. (When the teeth in mesh [TIM] is 6 or more, the teeth shear strength virtually exceeds the belt's tensile strength).

d) Nylon Facing: A thin nylon cover cloth, tough with excellent abrasion resistance, protects the belt teeth from wear caused by pulley contact. This gives long belt service life.

5�

USETHERIGHTTYPEOFBELT

Normally you will know because the old belts will be labeled. However, if you cannot read the labels, use Bando Belt and pulley Gauges.

USEAMATCHEDSET

From the same manufacturer, bel ts f rom di f ferent manufacturers can have different characteristics. Slight differences between belts causes strain and shortens belt service life. When installing new belts, always replace all the belts. Old belts become worn and stretched from use; if old and new belts are mixed, the new belts will do more work and as a result will fail early.

SAFETY

Make sure that all equipment is turned off, even if you are only going to touch it for a moment.

The drive should be fully protected by a guard.This not only ensures safe operation but also protects the drive from debris and keeps the belt running smoothly.

SHEAVES

Should also be checked and worn ones replaced. Any rust should be removed from the sheave surface. It accelerates belt wear. Paint or wax should never be applied to the sheave grooves.

INSTALLATION

5�

INSTALLATION

SHEAVEMOUNTINGANDALIGNMENT

Unless belts enter and leave sheave in a relatively straight line, wear is accelerated. In Diagram 1 the shafts of the two drives are not parallel. In Diagram � although the shafts are parallel the sheaves are incorrectly aligned. Use a steel straight edge to ensure correct alignment.

BELTSMUSTNOTBEPRISEDORROLLESONTOTHESHEAVE

This damages the belt internally and greatly shortens belt service life.Fingers can also be seriously injured if caught in the sheave. Always use the motor side (drive take up).

BELTSMUSTBECORRECTLYTENSIONED

The correct tension can be calculated from the slack and the load. Or the Bando tension meter can be used. The Optimum Tension is the lowest tension at which the belts will not slip under full load.Over-and under- tensioning causes respect ively, damage to the shaft bearings and belt slippage.After installation the drive should be run for 15 minutes to seat the belts before peak load is applied.If they slip tighten them, check frequently during first day of operation.

STORAGE

Poor storage causes belt deterioration. To prevent this the following conditions should be observed:

a) Belts should be stored in a cool dark place, away from radiators and direct sunlight. Heat will dry out the belts and cause them to become brittle and hard. Optimum conditions, temperature below 85°F (�0°C), relative humidity below 70%.

b) Belts may be stored either by coi l ing them on shelves, or hanging them on wide suppor ts or multiple hooks.(Avoid laying them on the floor)

c) Ensure that no oil or chemicals come into contact with the belts.

54

TROUBLEAREA CAUSE REMEDY

BELTSSTRETCHBEYONDTAKEUPBelts stretch unequally. Misaligned drive. Realign and re-tension the drive.

Belts damaged during installation. Replace with a matched set, properly installed.

Belts stretch about

equally.

Insufficient take up allowance. Check take up allowance in manual.

Greatly over-or under loaded drive. Redesign using manuals.

SHORTBELTLIFERelatively rapid failure no

Visible reason.

Underdesigned drive. Increase the number of belts, use a wider belt,

a high-power transmission belt or redesign

using manual.

Sheave diameter too small. Redesign using manual.

Belt runs on to sheave flange, due to misalignment. Redesign using manual.

Worn sheave grooves. Replace sheaves.

Belt damaged through improper installation. Replace with matched set properly installed.

Foreign substance caught between belt and

sheave.

Shield the drive.

Sidewalls soft, sticky,

and swollen, low adhesion

between cover plies.

Oil or grease on belts or sheaves. Remove source of oil or grease.

Clean surfaces.

Sidewalls dry and hard,

low adhesion.

High temperatures. Remove heat source, ventilate drive better.

Belt bottom cracked

Belt bottom cut

Sheave diameter too small. Redesign using larger sheaves.

Back side idler-pulley diameter too small. Replace with an inside idler-pulley, or

redesign.

High temperatures. Remove heat source, improve ventilation or

use a heat resistant belt.

Belt slipping because of insufficient tensioning. Re-tension.

Improper storage. Store belts properly.

Belt ran off the sheave. Check tension and alignment.

Foreign material fell into drive. Install drive shield.

Improper installation. Install new belts properly.

Deterioration of rubber in

belt.

Belt dressing. Never use dressing on V-belts.

TROUBLESHOOTING

55

TROUBLESHOOTING


Extreme cover wear, worn

corners.

Dust attached to belt. Clean surfaces and re-tension. Install shield.

Belt loosely tensioned. Re-tension.

Too few belts. Increase belt quantity.

Sheave grooves rusted. Remove rust or replace sheave.

Sharp corners or burrs on sheaves. Round corners and remove burrs with a file.

Sheaves misaligned. Re-align.

Angle of sheave groove incorrectly finished or

badly worn.

Replace sheave with a new one, with suitable

groove angle.

Outside diameter of right and left side of the

sheave differs.

Replace with an accurately machined one.

Spin burns on belt. Belt slips under starting or stalling load. Tighten belt until slipping stops.

Belt too loose. Adjust belt tension.

Sheave diameter too small. Replace sheave or use suitable belt.

Belt load miscalculated. Increase number of belts, or use high power

transmission capacity belt.

Water or oil on the belt. Install belt cover. Completely wipe the belt

clean.

Belt irregularly deformed. Belts ware piled up or bent when stored. Store belts by hanging them or by coiling on shelves.

BELTTURNOVERExcessive lateral belt whip. Use high power transmission capacity belt.

Foreign material in grooves. Install belt cover.

Misaligned sheaves. Realign.

Worn sheave grooves (use gauge). Replace.

Belt loosely tensioned. Adjust tension.

Belt deformed by fluctuating load. Replace with scrum, flat, or poly-V-belt.

Belt demaged through improper installation. Replace with matched set, properly installed.

If multi-strand driven, belt lengths differ. Replace belts with a matched set.

BELTVIBRATESIncorrectly placed flat idler pulley. Carefully align idler on flat side as close as

possible to drive shaft.

Distance between shafts in too long. Install an idler.

Belt too loose. Re-tension.

Belt lengths uneven. Replace with a new matched set belts.

56


BELTMEANDERSBELTNOISESheaves are misaligned. Realign.

Belt slips because of under tensioning, start up or

stopping time too abrupt.

Re-tension.

Lengthen start up and deceleration time.

Drive slower.


Belt type unsuitable. Replace with wrapped V-belt.

IMPROPERDRIVENSPEEDDesign error (incorrect ratio between drives). Use correct sizes.

EXCESSIVESLIPPINGSpin burns on belt. Re-tension drive until slipping stops.


Contact angle too small. Install back side idler pulley on slack side or

use synchro belt.

Water or oil on the belt. Install belt cover, and clean surfaces.

HOTBEARINGSDrive overtensioned. Worn-grooves, belts bottoming. Replace sheaves, re-tension drive.

Improper tensioning. Re-tension.

Sheaves too small. Design error. Redesign using manuals.

Poor bearing condition. Bearings underdesigned and/or badly maintained. Observe recommended bearing design and

maintenance.

Sheaves too far out Installation error or obstruction. Place sheaves as close to bearings as

possible, remove any obstructions.

Drive undertensioned. Belt slipping, causing heat build up. Re-tension drive.

SYNCHRONOUS-BELT:Teeth broken off Belt skips pulley teeth because its undertensioned. Re-tension.

Pulley teeth poorly machined, or badly worn. Replace pulley with correctly machined one. If

dust on teeth surfaces install cover.

Equipment stopping too quickly. Increase deceleration time, or use a stronger

belt.

Fewer than specified belt teeth are gripping the

pulley teeth.

Install back side idler on stack side of belt, or

redesign.

TROUBLESHOOTING

57

TROUBLESHOOTING


Belt becomes stiff and

cracks generate over the

surface of belt.

Ambient temperature is excessively high.

(over 90�)

Decrease the temperature or use heat-

resistant belt.

Belt breaks off without

leaving any fatigue.

Power transmission capacity of belt is

insufficient.

Use a wider belt, increase the diameter of

pulley, or trace the belt selection procedure

again.

Belt is unnaturally bent. Pay much attention to the maintenance or

handling of the belt.

Belt is installed by forcible wrenching. Install the belt by loosening the pulley slide or

the tension pulley.

Foreign substance is caught in. Install a belt cover.

Belt runs on to the flange of pulleys due to the

excessive misalignment of pulleys.

Align the pulleys.

One or both edges of belt

are worn out or broken

off.

Pulleys are misaligned. Align the pulleys.

The outside diameter of right and left side

pulleys differ.

Replace the pulley with an accurately

machined pulley.

POWERBANDBELT:Tie band separation belt

riding out of sheave

groove

Worn sheaves (check with gauge) Replace with new sheaves.

Misalignment of sheave. Realign.

Lack of tension. Re-tention.

Foreign object forced belt out. Remove any interference.

Riding outside and above sheave grooves. Properly maintain drive, and install belt

correctly.

All belts seprated from tie

band.

Drive shield loose and interfering with belt.

Worn idler sheave.

Adjust shielding.

Replace.

Top of tie band frayed Obstruction on machine. Realign drive and remove obstruction.

Tie bando top blistered Foreign material accumulating between belts

of power band.

Check shielding on drive.

Bottom of belt cracking. Belt slipping causing heat build up and gradual

hardening of undercord.

Check tension of power band.

58

The typical examples of power transmission belt trouble are presented below. These troubles are the result of faulty designing, handling or matching of belts and sheaves.

1.Cracksatthebottomofbelt

2.BreakoffofBelt

3.Twistingofbelt

EXAMPLES OF POWER TRANSMISSION BELT TROUBLE

59

EXAMPLES OF POWER TRANSMISSION BELT TROUBLE

4.Sidewearofbelt

5.BreakoffofBelt

6.Cracksonthebeltsurface

7.Sidewearofbelt

60

Belt Design Factors

(Fill in the blanks and consult with Bando.)

1 Machine type

� Service factor1.0 1.1 1.� 1.� 1.4 1.5 1.6 1.7 1.8 1.9 �.0 �.1 �.� �.� �.4 �.5 �.6 �.7 �.8 �.9 �.0

� Type of drive Motor EngineNormal: Max:

(PS. KW. kg-m, kg-cm)

4 Transmission characteristics Horse power constant Torque constant Operating hours / Day (hrs.)

5 Speed ratio Acceleration, Reduction : Pulley layoutDescribe separately if details are required.

6 Drive pulleyOuter dia.Pitch dia.

(mm) × (r.p.m.)

7 Driven pulleyOuter dia.Pitch dia.

(mm) × (r.p.m.)

8 Tension pulleyYesNo

(φ) Insideoutside

Slack sidetight side

9 Center distance ± (mm)

10 Drive system

Ordinary Horizontal Vertical

11 Sudden stop

Sudden stop

YesNo

Brake:

Input sideOutput side

Time from suddenStop to suddenStart or vice versa. (sec)

GD�: (kg-m-sec�)

1� Pulley space Any restriction:

1�Special requirement (Circle items and describe in detail.)

Heat resistance, Oil resistance, Cold resistance, Moisture resistance, Low noise, static conductive, Insulation, Others (Speed-up, Compactness, Vibration Non-slip, Light weight etc.)

Details

14 Belt Service Life desired (hrs.) Service condition: outdoor, dusty, others

15General Information on Belts now used.

Manufacturer: Type:Total quantity: Quantity by size:Belt service life Any problems:

Bando reserves the right to change product design, size, specifications, and materials at any time without obligation of replacement or refund on any products or parts there of which may be in any customers' possession at the time such changes become effective.Bando Chemical Industries, Ltd. shall not be liable for any damages and/or injuries whatsoever caused by any usage of the belts in this brochure for purposes other than power transmission.

61

MEMO

6�

http://www.bando.co.jp

BANDO CHEMICAL INDUSTRIES, LTD. 2008.2JAPAN OverseasBusinesscontact:

Overseas Business Administration Department 6-6, Minatojima Minamimachi 4-chome, Chuo–ku , Kobe 650-0047, JapanTEL: 81-78-��-�815 FAX: 81-78-��-�907E-Mail: [email protected]

NORTHAMERICA

BandoUSA,Inc.1149 West Bryn Mawr, Itasca, Illinois 6014�, U.S.A.

TEL: 1-6�0-77�-6600 FAX: 1-6�0-77�-691�

ASIA BandoManufacturing(Thailand)Ltd.47/7 Moo 4, Soi Watbangpla, Tambol Bankao, Amphur Muang, Samutsakorn, 74000, THAILANDTEL: 66-�446-84�� FAX: 66-�446-8415

EUROPE BandoEuropeGmbhNikolaus Strasse 59, D-41169 Moenchengladbach, FEDERAL REPUBLIC OF GERMANYTEL: 49-�161-90104-0 FAX: 49-�161-90104-50

BankoKoreaCo.,Ltd869-1, Eogok-Dong, Yang San City, Gyung Sang Nam-Do, 6�6-��0, REPUBLIC OF KOREATEL: 8�-55-�71-9�00 FAX: 8�-55-�88-0087

BandoIbericaS.A.Calle Francesc Layret 1�-14, Naves 4-5, Poligono Industrial Sant Ermengol �, 086�0 Abrera, (Barcelona), SPAINTEL: �4-9�-7778740 FAX: �4-9�-7778741

BandoJungkong,Ltd.4BA-705 (Shihwa Indus. Zone, Mechatronics Complex), Songgok-Dong, Ansan City, Kyongki-Do, REPUBLIC OF KOREATEL: 8�-�1-4��-98000 FAX: 8�-�1-4��-8198

BandoKockayaBeltManufacturing(Turkey),Inc.Ihasan Dede Cad. 1000 Sokak, Gebze Organize Sanayi Bolgesi, 41480 Gebze, Kocaeli, TURKEYTEL: 90-�6�-751-1691 FAX: 90-�6�-751-1698

SanwuBandoInc.11FL-�, No.51, Sec.1, Min Sheng E. Road, Taipei, TAIWAN

TEL: 886-�-�567-8�55 FAX: 886-�-�567-�710

ASIA Bando(Signapore)Pte.Ltd.�C Toh Guan Road East #50-01 SINGAPORE 6088��

TE: 65-6475-�� FAX: 65-6479-6�61

BandoSiixLimitedRoom ��10, Shun Tak Centre, West Tower, �00 Connaught Road Central, HONG KONG TEL: 85�-�494-4815 FAX: 85�-�481-0444

PhilippineBeltManufacturingCorporation�nd Floor, Siemkang Building, �80-�8� Dasmarinas Street, Binondo, Manila 1099, PHILIPPINESTEL: 6�-�-�41-0794 FAX: 6�-�-�41-��79

BandoBelt(TianJin)Co.,Ltd.No. �7 of HaiTong Avenue, TEDA, Tianjin, �00457, CHINA

TEL: 86-��-66��-7077 FAX: 86-��-66��-70�6

KeeFattIndustries,Sdn.Bhd.NO.� Jalan Sengkang, Batu ��, Kulai 81000 Kulai, Johor, MALAYSIATEL: 60-7-66�-9661 FAX: 60-7-66�-9664

BandoManufacturing(Shanghai)Co.,LtdRm.B, First Floor, Block 56, No.199, Riying North Road, Wai Gao Qiao Free Trade Zone, Pudong District, Shanghai, China.TEL: 86-�1-5046-0161 FAX: 86-�1-5046-0649

PengeluaranGetahBando(Malaysia)Sdn.Bhd.No.� Jalan SengKang, Batu ��, Kulai 81000 Kulai, Johor, MALAYSIATEL:60-7-66�-50�1 FAX: 60-7-66�-50��

BandoManufacturing(Dongguan)Co.,Ltd.Building ZF8, ZhenAn Industrial Park, ZhenAn Road, ChangAn Town, DongGuan City, GuangDong Province, ChinaTEL: 86-769-8564-5075 FAX: 86-769-8564-5081

P.T.BandoIndonesiaJI. Gajah Tunggal, Kel. Pasir Jaya, Kec. Jati Uwung, Tangerang 151�5, INDONESIATEL: 6�-�1-590�9�0 FAX: 6�-�1-5901�74

Bando(India)PrivateLimitedPlot No.�55, Sector-7, IMT Manesar, Gurgaon-1��050 Haryana INDIA TEL: 91-1�4-4�6-8951 FAX: 91-1�4-4�6-8954

Power transmission belts selector

Documents

Transcript of Power transmission belts selector