POWER SUPPLIES
1
-21- The XP-810 is an isolated- variable AC power supply. The voltage output is 0 - 140VAC at 3A continuous or up to 4A intermittently. The unit has a built-in isolation transformer for safe servicing of “hot chassis sets”. The unit features a four- inch meter to monitor voltage and current. The Model XP-810 also has a triac circuit to vary the voltage to a soldering iron, keeping it at any desired temperature. Isolated Variable AC Power Supply Model XP-810 POWER SUPPLIES Model XR-36 is a 13.8VDC regulated power supply capable of delivering up to 3A of continuous current. It is ideal for mobile radio, cellular phones, CB or ham radio equipment. UL/CSA approved Deluxe Battery Eliminator Model XP-100 Specifications Input voltage 120VAC Output voltage 13.8VDC Output current 3A continuous, 5A surge Dimensions 3 1/8” (H) x 4 3/4” (W) x 7 3/4” (D) Weight 5 lbs. 9.6 oz. This power supply is an ideal bench top battery eliminator. Substitutes a wide variety of batteries including AA, AAA, C, D, and 9V types. The voltage is conveniently selected by a rotary switch. Advanced, solid-state electronics provide both LINE and LOAD regulation of the output voltage. The voltage selector switch is precision-designed so that the output voltage does not increase during adjustment between voltage ranges. Spectrum Tube Power Supply Model STPS-1 This power supply provides safe and reliable operation for 10” spectrum tubes. The unique design supplies a voltage that prolongs the life of the spectrum tubes. Specially designed sockets eliminate electrical shock hazards. The unit operates at 120V @ 60Hz. (Tube not included). Specifications Input voltage 120VAC, 60Hz Output voltage 5,000V without spectrum tube. 1,000V @ 10mA with spectrum tube. Operating temp. 10 O C to 50 O C Storage temp. –20 O C to 60 O C Dimensions 13 3/4” (H) x 4 5/8” (W) x 3 1/2” (D) Weight 4 lbs. 12.8 oz. Fixed Voltage Supply Model XR-36 Specifications Input voltage 120VAC Output voltage 1.5, 2.2, 3, 4.5, 5, 6, 7.2, 9, 10, 15, 21, 25VDC Output current 1A max. Accuracy + 5% Dimensions 3 3/4” (H) x 8 1/4” (W) x 7” (D) Weight 5 lbs. AC/DC Variable Power Supply Model XP-625 Specifications Input voltage 105 to 130VAC. METER ACCURACY (25 O C) Volts ±3% of full scale (calibrated @ 120VAC). Current ±5% of full scale. Leakage ±5% @ 500μA. Output voltage range 0 - 140VAC at 120VAC input. Output current 3A continuously or 4A intermittently. Intermittent current should not exceed 10 minutes on followed by 10 minutes off. Soldering iron temperature control - 60% to 99% of AC power line, 100 watts max. Output isolation Leakage less than 100μA at 25 O C, 50% related humidity. Operating temperature 0 O C to +40 O C. METER SCALES Voltage 0 - 150V. Volt-amps 0 - 240VA, 0 - 480VA. Current 0 - 2A, 0 - 4A. Leakage 0 to 5mA (5,000μA), expandable scale. Storage temperature –30 O C to +60 O C. Dimensions 5 1/2” (H) x 11 1/2” (W) x 7 3/4” (D) Weight 20 lbs. (5.44 kg). The XP-625 is an ideal power supply for your school lab. It has a DC output from 0-30V at up to 5A, and an AC output of 0-40V at up to 5A. The voltage adjust knob controls all three outputs while the volt and amp meters display the desired setting. Specifications Input voltage 120VAC Output voltage DC 0-30VDC, 5A max. Output voltage AC 0-40VAC, 5A max. Output voltage 0-110VAC, 2.5A max. Dimensions / weight 5 3/8” (H) x 7 3/4” (W) x 12” (D) / 14 lbs. 14 oz.
Transcript of POWER SUPPLIES
-21-
The XP-810 is an isolated-variable AC power supply. Thevoltage output is 0 - 140VAC at3A continuous or up to 4Aintermittently. The unit has abuilt-in isolation transformer forsafe servicing of “hot chassissets”. The unit features a four-inch meter to monitor voltageand current. The Model XP-810also has a triac circuit to vary thevoltage to a soldering iron,keeping it at any desiredtemperature.
Isolated Variable AC Power SupplyModel XP-810
POWER SUPPLIES
Model XR-36 is a 13.8VDCregulated power supply capableof delivering up to 3A ofcontinuous current.It is ideal for mobile radio,cellular phones, CB or hamradio equipment.
UL/CSA approved
Deluxe Battery EliminatorModel XP-100
SpecificationsInput voltage 120VACOutput voltage 13.8VDCOutput current 3A continuous, 5A surgeDimensions 3 1/8” (H) x 4 3/4” (W) x 7 3/4” (D)Weight 5 lbs. 9.6 oz.
This power supply is an ideal bench top battery eliminator.Substitutes a wide variety of batteries including AA, AAA, C, D,and 9V types. The voltage is conveniently selected by a rotaryswitch. Advanced, solid-state electronics provide both LINE andLOAD regulation of the output voltage. The voltage selectorswitch is precision-designed so that the output voltage does notincrease during adjustment between voltage ranges.
Spectrum Tube Power SupplyModel STPS-1
This power supply provides safe and reliableoperation for 10” spectrum tubes. The uniquedesign supplies a voltage that prolongs the lifeof the spectrum tubes. Specially designedsockets eliminate electrical shock hazards. Theunit operates at 120V @ 60Hz.(Tube not included).
SpecificationsInput voltage 120VAC, 60HzOutput voltage 5,000V without spectrum tube.
1,000V @ 10mA with spectrum tube.
Operating temp. 10OC to 50OCStorage temp. –20OC to 60OCDimensions 13 3/4” (H) x 4 5/8” (W) x 3 1/2” (D)Weight 4 lbs. 12.8 oz.
Fixed Voltage SupplyModel XR-36
SpecificationsInput voltage 120VACOutput voltage 1.5, 2.2, 3, 4.5, 5, 6, 7.2, 9, 10, 15, 21, 25VDCOutput current 1A max.Accuracy + 5%Dimensions 3 3/4” (H) x 8 1/4” (W) x 7” (D)Weight 5 lbs.
AC/DC Variable Power SupplyModel XP-625
SpecificationsInput voltage 105 to 130VAC. METER ACCURACY (25O C)
Volts ±3% of full scale (calibrated @ 120VAC).Current ±5% of full scale.Leakage ±5% @ 500μA.
Output voltage range 0 - 140VAC at 120VAC input.
Output current 3A continuously or 4A intermittently.Intermittent current should not exceed 10minutes on followed by 10 minutes off. Soldering iron temperature control - 60% to 99% of AC power line,
100 watts max.Output isolation Leakage less than 100μA at 25O C,
50% related humidity. Operating temperature 0O C to +40O C.
METER SCALESVoltage 0 - 150V. Volt-amps 0 - 240VA, 0 - 480VA.Current 0 - 2A, 0 - 4A. Leakage 0 to 5mA (5,000μA),
expandable scale.
Storage temperature –30O C to +60O C.
Dimensions 5 1/2” (H) x 11 1/2” (W) x 7 3/4” (D)
Weight 20 lbs. (5.44 kg).
The XP-625 is an ideal power supply for your school lab. It has aDC output from 0-30V at up to 5A, and an AC output of 0-40V atup to 5A. The voltage adjust knob controls all three outputs whilethe volt and amp meters display the desired setting.
SpecificationsInput voltage 120VAC
Output voltage DC 0-30VDC, 5A max.
Output voltage AC 0-40VAC, 5A max.
Output voltage 0-110VAC, 2.5A max.
Dimensions / weight 5 3/8” (H) x 7 3/4” (W) x 12” (D) / 14 lbs. 14 oz.
