REFLECTORS files/catalog-2009/USreflector-Reflectors.pdfHigh power prismatic reflectors for...
Transcript of REFLECTORS files/catalog-2009/USreflector-Reflectors.pdfHigh power prismatic reflectors for...
REFLECTORS
www.usreflector.com
RF31.5 x 7 inch
RF23 1/4 x 4.5 inch
RF1Dia: 2.37 inch
RF42.75 x 4.75 inch
REFLECTORSHigh power prismatic reflectors for precision light reflex and superior visibility.
P R I S M A T I C
Page A-1
Prismatic reflectors utilize a unique asymmetrical prismatic form that is designed to multiply entering light beams into intense candlelite power.
MODEL HEIGHT LENGTH WIDTH White Yellow Amber Orange Red Green Blue COSTRF1 2.37” 2.35” 0.23” 0110-W 0110-Y 0110-A 0110-O 0110-R 0110-G 0110-BRF2 3” 4.5” 0.23” 0112-W 0112-Y 0112-A 0112-O 0112-R 0112-G 0112-BRF3 7” 1.5” 0.23” 0112-W 0114-Y 0114-A 0114-O 0114-R 0114-G 0114-BRF4 2.75” 4.75” 0.23” 0116-W 0116-Y 0116-A 0116-O 0116-R 0116-G 0116-B
AST-R3 3” 3” 01.9 6100-W N/A 6100-A N/A 6100-R N/A 6100-BAST-T1 5 ½” 6” 0.20 N/A N/A N/A N/A 6105.R N/A N/A AST-S1 4 ¼” 2 ½” 1” 6130-W N/A 6130-A N/A 6130-R N/A N/AAST-W1 ¾” 3 ½” 2 ¼ 6140-W N/A 6140-A N/A 6140-R N/A N/A
Reinforced high power prismatic reflectors are built with individual reflective chambers that protect the lens from contamination if it is exposed to outside
High power reflectors can be clustered together forming reflective panels, or they can be applied individually.
ReinforcedChambers
Cross frameMounting holes
www.usreflector.comPrices reflect single units only, please contact your sales representative for quantity pricing
HIGH POWER REFLECTORS
APPLICATIONS:PolesFences
REFLECTORS
AST-R3 Size: 3 inches
AST-W1
RAISED ANGLED MARKERSS
UP
PO
RT
Multi-purpose horizontal and verticle mount raised angled reflective markers. Illuminate walls, islands, polls, parking lot curbs, and vehicles. Affix with adhesive, adhesive tape
Use for walls, vehicles, and poles. Afix with adhesive or adhesive tape
AST-S1
3 1/4” x 3 1/2” x 2 1/4” sides
SAFETY TRIANGLEAST-T1
4 1/4” x 2 1/2” x 1”
Height: 5 1/2” Width: 6”
All high power reflectors have an inner cross frame that not only strengthens the reflector, but protects the chambers from contaminating elements, thereby allowing the reflector to perform under the most extreme conditions.
Reflectors can be mounted on trees, poles, gates, vehicles, buildings, jersey barriers and guard rails or may also be adapted to any application requiring safety enhancement.
Inner cross frame adds strength and durability to all applications. Reflectors can be installed using adhesive, tape, screws, nails and rivets.
REFLECTORS
C Y L I N D R I C A L
Long lasting Glass Bead reflectors are built into an extremely durable semi-flexible support making them virtually indestructible. Cylindri-cal reflectors are available in two (2) types, with and without holes. R e f l e c t o r s w i t h o u t h o l e s r e q u i r e a d h e s i v e o r d o u b l esidedtapeforinstallation. How they reflect: Unlike prismatic reflectors with molded prisms, glass bead technology reflects light similarly to that of a mirror. The form and shape of the bead allow enter-ing light to project itself in a wide angle, thereby creating a “Cats Eye” effect. Available in all colors.
www.usreflector.com
Glass bead reflectors for applica-tions that are subjected to impacts or abuse.
DUAL CENTER HOLESREFLECTORS WITH CENTER HOLE
ITEM # 3290
Size3”
Elements197
ITEM # 3690
Size2”
Elements69
ITEM # 2380
Size2.4”
Elements72
ITEM # 3670
Size1.6”
Elements45
ITEM # 3650
Size1.25”
Elements23
ITEM # 3610
Size0.63”
Elements6
ITEM # 3191
Size8.3”
Elements1123
ITEM # 3164
Size8.3”
Elements500
Width1.2”
ITEM # 3163
Size5.83”
Elements640
Round center insert fits Item # 3164
ITEM # 3900
Size409”
Elements256
ITEM # 3880
Size1.6”
Elements45
ITEM # 3380
Size2.5”
Elements121
ITEM # 3680
Size2”
Elements70
ITEM # 3660
Size1.6”
Elements46
ITEM # 3640
Size1.25”
Elements24
ITEM # 3601
Size0.65”
Elements7
3290-GB- W-W2380-GB-BK-W3690-GB-BK-R3670-GB-BK-W3650-GB-Y-Y3610-GB-BK-W3164-GB-W-W3163-GB-R-R3900-GB-Y-Y3880-GB-BK-W3380-GB-BK-Y3191-GB-Y-R
3680-GB-R-R3660-GB-W-W3640-GB-Y-Y
When ordering reflectors, please provide housing color and glass element colorAS SHOWN:
$$$$$$$$$$$$
$$$$Per piece$$
$$$$
ITEM # Size9205-8 0.31 x 0.439205-10 0.39 x 0.519205-13 0.51 x 0.709205-14 0.55 x 0.75
3040 0.47 x 0.373020 0.58 x 0.55
SINGLE ELEMENTS
ITEM # Size
ELEMENTS WITH HOUSINGS
WITHOUT CENTER HOLE
ITEM # ITEM # PRICE PRICE
3601-GB-W-WSingle elements3040-GB-BK-W3020-GB-BK-R
9205-GB-8-W9205-GB-10-Y9205-GB-13-R9205-GB-14-B
Page A-2Prices reflect single units only, please contact your sales representative for quantity pricing
Per 100 units
Black - BKWhite - WRed - RYellow - Y
White - WRed - RYellow - Y
Housing colors Available:
Bead colors Available:
REFLECTORS
RECTANGULAR
www.usreflector.com
Glass bead reflectors for applications that are subjected to impacts and abuse.
WITHOUT CENTER HOLEREFLECTORS WITH MOUNTING HOLES
ITEM # 3320
Size9.8”x1.5”
Elements268
When ordering reflectors, please provide housing color and glass element color
FLEXIBLE GLASS BEAD STRAPPING
Universal linear glass bead striping. Illuminate poles, ve-hicles, stairs etc...Single row Item # 3100 Double row Item # 3110
ITEM # 2371
Size7”x1.5”
Elements170
ITEM # 3390
Size5.9”x1.2”
Elements171
ITEM # 3852
Size4.9”x0.9”
Elements101
ITEM # 3370
Size7”x1.5”
Elements272
ITEM # 2390
Size5.9”x1.2”
Elements100
ITEM # 4852
Size Elements38
ITEM # 3364
Size Elements346
ITEM # 3362
Size Elements190
Sold by the foot or in 25 yard rolls
ITEM # 3577
Size Elements21
ITEM # 3568
Size4.4”x0.7”
Elements76
ITEM # 3561
Size Elements43
ITEM # 3392
Size5.9”x1.2”
Elements179 ITEM #
3585Size Elements
31
ITEM # 3589
Size2.4”x0.4”
Elements19
ITEM # 3590
Size2.5”x0.4”
Elements21
Page A-3Prices reflect single units only, please contact your sales representative for quantity pricing
Long lasting Glass Bead reflectors are built into an extremely durable semi-flexible support making them virtually indestructible. Cylindrical reflectors areavailible in two (2) types, with and without holes. Reflectors without holes require adhesive or double sided tape for installation.
How they reflect: Unlike prismatic reflectors with molded prisms, glass bead technol-
ogy reflects light similar to a mirror. The form and shape of the bead allow entering light to project itself in a wide angle, thereby creating a “Cat’s Eye” effect. Available in all colors.
ITEM # PRICE3364-GB-BK-W
3362-GB-BK-W
3320-GB-Y-Y
2371-GB-BK-W
3370-GB-BK-Y
3390-GB-Y-Y
2390-GB-W-W
3852-GB-BK-W
4852-GB-BK-R
ITEM # PRICE3392-GB-Y-Y
3561-GB-R-R
3568-GB-W-W
3577-GB-Y-Y
3585-GB-W-R
3589-GB-W-R
3590-GB-Y-Y
AS SHOWN:Black - BKWhite - WRed - RYellow - Y
White - WRed - RYellow - Y
Housing colors Available:
Bead colors Available:
REFLECTORS
LETTERS AND NUMBERS
High visibility indoor and outdoor reflectors. Reflective marking systems greatly enhance awareness in all weather conditions, day and night, inside or out. Prismatic reflectors can be used individually or they can be clustered together to create signs of any dimension for words and logos. Glass element reflectors have individual reflective “Cat’s Eye” beads that illuminate when exposed to any amount of light. Durable bright color markings clearly identify all applications. Both prismatic and glass element reflectors exceed any other reflecting device in their category.
www.usreflector.com
Reflective letters and numbers provide distinct day and night visibility.
PRISMATIC REFLECTORS WITH MARKINGSREFLECTIVE GLASS NUMBERS
Blue CrystalRed Crystal White Crystal
ShatterproofWaterproofUV ProofSelf-CleaningInterchangeable
Resistant to all types of cleaning solvents. Made from the highest reflective properties. Cat’s Eye Reflector is protected by its firm permanent backing.
Reflective numbers stand out in all weather. Identify buildings quickly and effectively for all fire, police or emergency per-
119REFLECTORS
WITH NUMBERS
REFLECTIVE GLASS LETTERS
Ex t reme ly du rab le g lass e l e m e n t s m o l d e d i n t o a semi-flexible support.
Reflectors have two (2) anchoring holes for quick and easy fixation.
High power prismatic reflectors are built with individual reflective chambers that protect the lens from contamination if it is exposed to outside elements.
REINFORCED
High power reflectors can be clustered together forming reflective signs or they can be applied individually to provide enhanced safety.
INSTALLATION
Resists high impacts when sub-jected to severe conditions.
Can be installed with ei-ther screws, nails, ad-hesive or double sided tape.
AESTHETIC SUPPORTS FOR REFLECTORS
Unbreakable pre-cut Fiber Board.
Wrought Iron support for all prismatic & glass bead reflectors
Rod Iron
Fiber Board
REFLECTORS ARE :
Page A-4Prices reflect single units only, please contact your sales representative for quantity pricing
Item # Size Color0112-W-0-9 3” x 4.5” White
0112-W-A-Z 3” x 4.5” White
Item # Size Reflectors ColorS730-RI-BK H 33” xW 4.5” Up to 4 Black rod iron
Item # Size Reflectors ColorS730-10-FBW H 7” x W 10” Up to 2 WhiteS730-13-FBW H 7” x W 13” Up to 2 WhiteS730-16-FBW H 7” x W 16” Up to 2 White
REFLECTORS Lens Color Font Color Item Numbers & Letters Cost
Prismatic White Black 0112-W-(0-9) - (A-Z) -BK
x Red White 0112-R-(0-9) - (A-Z) -BK
x Blue White 0112-B-(0-9) - (A-Z) -BK
Wrought Iron 4 Reflectors maximum
Fiber Board All sizes and shapes Price per square inch
Bead Color Font Color Item Numbers & Letters Cost
White Black 3730-GB-(0-9)(A-Z)-BKW
White White 3730-GB-(0-9)(A-Z)-WW
Red Red 3730-GB-(0-9)(A-Z)-RR
Blue Blue 3730-GB-(0-9)(A-Z)-BB
REFLECTORS
GATES AND CHAINS
Pre-installed safety reflectors on aluminum, plastic and fiber board supports are ideal for marking gates, fences, chains and poles. US Reflector offers factory installed reflective device supports that are ready for application. Enhance dangerous entrances instantly with prismatic or glass bead reflectors in a choice of standard colors.
Illuminate dangerous invisible chains with Chain GuardTM tubular mount reflectors and supports.
Reflectors are assembled with all plastic materials eliminating rust and corrosion, guaranteeing maintenance free installations.
www.usreflector.com
Illuminate dangerous gates and chains with pre-assembled safety reflectors.
REFLECTORS FOR GATES
ORDERING All models gate reflectors are available in all standard colors Red, white, yellow, green and blue.
CUSTOM MANUFACTURING US Reflector offers several choices of styles and mounting hardware for multiple applications. Eliminate the guess work, call or e-mail us with your application. Chances are it may already be available. Day Night
Before installation After installation
GT-1
GT-2
GT-3
Multi-use gate and chain reflectors are available with aluminum, plastic or fi-ber board supports for all applications.
Available in single or double sided units
Size: 22” x 3.5”
REFLECTORS FOR CHAINS
Universal Chain Guard reflectors with nylon protective end bumpers permanently identify chains up to 2 1/4” in thicknes. Heavy duty aluminum support guarantees strength and durability. Two pin locking system for specific positioning. Assembled with all plastic components, eliminateing rust and corrosion. Ideal in all marine applications. Reflectors can be interchanged and color coded for designated areas. Chains over 2 1/4”, require custom manufacturing. INSTALLATION: Unlink chain, slide into position and lock into place with the link locks.
Tubular Chain Guards with Diamond Grade reflective film.PVC Chain Guards offer economical safety enhancement for all chains.
Prevent an accident, install a Chain Guard today.
CG-10 CG-15
CG-20 CG-20CG-20
SIGN GRABBERDesigned to instantly affix any sign or reflective panel to a chain link fence. See page A-9 for more details
Page A-5Prices reflect single units only, please contact your sales representative for quantity pricing
Bumper Guards
Reflectors Glass Beads
PART # SUPPORT COLORS LENGTH WIDTH ITEM NUMBERS COSTGT-1 A-Aluminum -White 22” 22” AG-0112-22-OGT-2 P-Plastic -Yellow 22” 22” AG-0114-22-RWGT-3 F-Fiberboard -Orange 22” 22” AG-0110-22-OCG-10 A-Aluminum -Red 7.5” 1.7” CG-0114-7-RBCG-15 or -Green 7.5” 1.7” CG-2371-7-YRCG-20 P-Plastic -Blue 2.5” 1.7” CG-3990-7-RSG-1 Sign Grabber 1” See page A-9
SG-2 Sign Grabber 2.5” See page A-9
Your safety concerns are our priority. No matter what quantity may be required, US REFLECTOR will produce a custom designed safety device of one (1) or more pieces to fulfill your safety enhancement projects.
REFLECTORS
BREAKAWAY
www.usreflector.com
Pre-assembled reflectors on a PVC semi flexible post for greater visibility.
SINGLEPost height 47
1 Reflector
SECTION 18 X 18 mm SECTION 18 X 18 mm
SECTION 18 X 18 mm SECTION 18 X 18 mm
2 WAYPost height 47 inches
2 Reflectors
4 WAYPost height 50 inches
4 Reflectors
SUPER IMPOSEDPost height 50 inches
2 Reflectors
Page A-6
PLASTIC BASE WITH PROTECTIVE PLASTIC CAP
SUPPORT FOR U-CHANNEL POSTS
Pre-drilled holes for fast installation
Ready plates allow 2 or more reflectors to be ins-talled on new or existing P5 and P9 posts including Uni-strut type tubing.Custom sizes available upon request. Available either in plastic or aluminum.
Plastic PVC post fits into its own plastic base support offering instant removal and replacement. This greatly facilitates ground maintenence. Reflectors, PVC support and base provide a clean, professional,quick and effective
Reflectors and green PVC supports render areas safe and are aesthetically sensitive. Reflectors are available in white, amber, yellow, orange, red, green and blue. Markers will not rust, crack, chip or fade. They are assembled with plastic rivets thereby eliminating sharp edges.
Earth
Prices reflect single units only, please contact your sales representative for quantity pricing
Single or superimposed.Plate fits all sizeReflectors: Round Square Rectangle
Clean professional installation. Instantly remove post and plug base with attached plastic cap. Reinsert reflector marker after maintenance. Prevents debris from entering support tube.
Holds up to two 3 x 4.5” Reflectors
Plastic base, fits all breakaway markers.
Base
Reflector Support
ITEM # DESCRIPTION COST0130-1-W Single0130-2-W Superimposed0132-2-WW 2-Way0132-4-WW 4-Way0130 PVC Stake0137-CAP Plastic base0199-A Aluminum support0199-P Plastic support
REFLECTORS
REFLECTIVE FILM
Instant “peel-off” liner for “Quick stick” applications on virtually any surface.
www.usreflector.com
Economical, self adhering, easy to use, Diamond grade reflective film.
CONSPICUITY SHEETINGMODEL C1
DIAMOND GRADE REFLECTORS Diamond Grade reflectors feature highly reflective prismatic lenses in a durable, transparent, synthetic resin sealed medium, backed with an aggressive, pressure sensitive adhesive and clear poly liner.
C1 Conspicuity Diamond Grade reflective films are designed to illuminate and render vehicles safer for both day and nighttime use.
Studies show that conspicuity markings reduce the probability of serious ac-cidents. Drivers rely on what they are able. Vehicles marked with reflective sheeting provide better visual information, allowing faster, more accurate decision making by drivers.
C2 Daytime Conspicuity sheeting can be used on vehicles and equipment randomly in both inside and outside environments.
11” Red strip promotes additional attention to bright day time environments distinguishing a vehicle’s presence.
6” 6”
Day / Night
7” 11”
Day Visibility
Wide angle micro prism lens assures enhanced day and night visibility for all vehicles.
MODEL C2
C3 Conspicuity has been designed for applications requiring solid colors. Re-flective prismatic film is sealed and backed with an aggressive, pressure sensitive adhesive and clear poly liner for instant adhesion to virtually all surfaces.
MODEL C3
Available in 18” red/white strips and 50 yard rolls
Available in 12” red/white strips and 50 yard rolls
FEATURES Superior angularity beyond 60 degrees. Reflectors are available in:
Designed for brightness and superior visibility.
MICRO PRISM DIAMOND GRADE REFLECTORS
MODEL C5
MODEL C6
Available in 12” strips and 50 yard rolls Sizes 1” - 1.5” - 2” - 3” - 4”
C5 and C6 are available individually or in rolls of 100. Sizes: C5 3.5” x 2”. C6
Page A-7
• Bright red • Amber • White
Prices reflect single units only, please contact your sales representative for quantity pricing
MODEL ITEM # 1” 1.5” 2” 3” 4” Each RollC1 981-326 -1 -15 -2 -3 -4C2 981-32 -1 -15 -2 -3 -4C3 981-72 -1 -15 -2 -3 -4
MODEL White Red AmberC5 5652-W 4648-R 4655-AC6 N/A 2699-R 2700-A
™
REFLECTIVE
Available colors: white, yellow, orange, blue, red, fluorescent Yellow Green
US REFLECTOR 144 Canterbury St. Worcester MA. 01603 Toll Free: 800 414-5024 / www.usreflector.com
Order Reference numbers
Ref# DescriptionQuantity
1 12 25 50RSP-HI-Color 3”x16”reflectivesignpostpanel $ $ $ $
TM
SU LED - Safety Products - Marker & Delineators
Mounting US Reflector Reflective Sign Panels directly to your sign post and increase the effectiveness of your traffic sign, day or night. Reflective Post Panels are available in all standard colors each sized at 3” x 16” Complete with pre-attached stems and fixation nuts
SIGN POST PANEL
Stop signs Do not enter Crosswalks Dangerous turns Exit signs Yield signs
QUICK CONNECT
REFLECTIVE SIGN POST PANELFITS U-CHANNEL AND UNISTRUT TYPE POSTS
Fits unistrut and U-Channel type posts
1. Remove nuts 2. Insert panel 3. Attach nuts
Multiple reflective panels can be per sign post
Post Panels are available in all standard high intensity and Diamond grade 3M Reflective film
Attention! Reflective Sign Post Panels Highlight and identify your Sign’s Message to motorists.Quick cost effective reflective add-on to:
REFLECTORS
REFLECTIVE PAINT
www.usreflector.com
AEROSOL SPRAY12 oz Glass beads are manufactured to receive and
project light rays permitting a beam of light to be returned to its source with immense clarity. The micro glass bead elements are imbedded in a pigmented binder which secures the bead to the painted surface. The aluminized encapsulated spheres provide an effective optical reflex system which is highly visible at night. Glass spheres resist ultra violet rays and are impervious to static buildup.
Sphere Brite Night vision reflective spray can be applied on any surface to create a bright reflective finish. Sphere Brite’s aluminized micro glass spheres resist ultra violet rays and outside aggressions providing long term reflective characteristics. How does it work? A special acrylic paint mixture is used to maintain the spheres in suspension. This mixture allows the aluminized spheres to adhere to most any surface providing surface protection while creating a reflective surface. Sphere Brite is a precision micro bead delivery system that can be applied to metal, concrete, asphalt, wood, rock and some plastics. Revolutionary retroreflective paint is available in liquid form or aerosol spray for reflecting all types of surface. Retroreflection increases visibility, which in turn, increases safety.
SPHERE BRITE reflective paint is available in 1 gallon, 5 gallon and 55 gallon containers to accommodate any safety enhancement project quickly and effectively. Do not over spray.
MICRO PRISM OPTICAL REFLECTIVE BEADS
Page A-8Prices reflect single units only, please contact your sales representative for quantity pricing
SPHERE BRITE Reflective glass sphere bead delivery system.
Micro sphere technology with colored acrylic lacquer can be sprayed on virtually any smooth or porous surface for effective night-time illumination. Instantly illuminate any surface with a light coat of spray mist. One (1) 12 ounce aerosol can covers approximately 18 square feet.
SPHERE BRITE™ reflects light with ultimate optical efficiency even under wet conditions.
ITEM # SBA-12
LIQUID 1 Gallon 5 gallon 55 gallon
ITEM # SBL-1
Aluminized spheres perform efficiently without deterioration unless subjected to severe wear factors. Sphere Brite reflective paint can be applied when needed for continued high reflective performance.
Image not available
ITEM # SBL-5
ITEM # SBL-55
AEROSOL SPRAY FOR EXCEPTIONAL NIGHT VISION
40 Yards
Reflectorizes surfaces in seconds Dries in minutes Available in five colors Simple easy to use
FEATURES
ILLUMINATEChainsSignsCurbsTreesPolesVehicles
ITEM # QTY AVAILABLE COLORS PRICEAEROSOL Lt Grey Charcoal Green Blue Maroon
SBA-12 12 oz LTG N/a N/a N/a N/aGALLONS
SBL-1 1 Gallon-LTG -CTL -G -B -MSBL-5 5 Gallon
SBL-55 55 Gallon
Instantly illuminate curbs, gates, fences and other obsticlesSPHERE BRITE dries in
minutes providing a durable reflective surface that will last for years.
SPHERE BRITE can be used for illuminating entrance curbs, signs, sign posts, buildings, security lines, trees, vehicles, boats, docks and graphic designs. Templates may be used for creating reflective squares and numbers or by inverting the stencil allowing for cost effective safety solutions.
AVAILABLE COLORS Light grey, charcoal, green, blue and ma-roon.
USE ON Metal, rock, asphalt, wood, plastics, glass and cement. Surface should be clean and free of oil and dirt. Do not over spray.
DISCOVER a new world of reflective solutions with US Reflector Sphere-Brite® products. Sphere-Brite® is a breakthrough in coating objects for reflectivity. A quick spray using the aerosol can gives a long term reflective coating for most all surfaces. Sphere-Brite® is continuously being used in hundreds of laboratories for data readings infrared red, other applications include audio-visual blue & green chroma backgrounds for non linear editing. Stencil signs, highlight dangerous curbs, illuminate stones and obstacles in water ways.
SPHERE-BRITE®
REFLECTIVE PAINT SOLUTIONS
www.usreflector.com
SPHERE-BRITE A new generation of reflection Available in the following choices:
Reflective Acrylic aerosol for quick universal applications on all surfacesReflective Water base latex for concrete barriers, guardrails & curbingReflective Water base latex for street markings and legendsReflective latex textile screen printing ink for fabric
REFLECTORIZE ALL
SURFACES INSTANTANEOUSLY
EASY TO USE
DURABLE
INFRARED VISIBILITY
DAY & NIGHT VISIBILITY
AVAILABLE IN ALL COLORS REFLECTORIZE GATES,
POLES, CHAINS
BENEFITS
:
TM
SU LED - Safety Products - Marker & Delineators
Reflective INKSPHERE-BRITE®
DESCRIPTION Sphere-Brite® SBT-7 is our unique single package formula for textile & apparel printing. When properly cured on woven cotton or nylon fabric it maintains over 60% of its original reflectivity after 50 AATCC home laundry cycles. The ink is easy to use and has a shelf life of over 12 months while pro-ducing excellent and consistent print quality. SBT-7 Latex Textile Screen Printing Ink is pigmented solely US Reflector #1945 retro- reflective micro spheres. Stabilizers and other additives are selected for clarity and wash fastness; contains no fillers. SBT-7 prints well on woven or knit cotton, poly/cotton, polyester and other porous fabrics (nylon, urethane, polyolefins), or Lycra/Spandex. Please consult a US Reflector representative for alternative ink recommendations.
Packaged in 1, 5, 25 and 55 gallon drums.
BENEFITS SBT-7 Screen Printing Ink is designed to reflectorize textiles using a standard screen printing process. SBT-7 universal reflective ink formula for textiles allows application on many different fabrics creating a ready to use packaged solution. Sphere-Brite® inks can be used as an alternative solution to 3rd party reflective straps that require sewing and adhesive while significant re-ducing manufacturing costs. Sphere-Brite® SBT-7 Screen Printing Ink can be applied to stretch fabrics such as spandex and other similar ma-terials offering solutions when visibility must be an in-tegrated and combined with fabric.
Durable reflective ink for textiles and most all fabrics
Retro-Reflective Latex Textile Screen Printing Ink
For more information please contact your sales representative or US Reflector Toll Free: 800 414-5024 / www.usreflector.com
Reflective ink formula
for fabrics
Easy to use BENEFITSHigh reflectivity
Durable
Reflectorize textiles directly on surface
•
•
•
•
•
•
CHARACTERISTICS
APPLICATION When applied as directed, the dry film will reflect point source light back to the source as brilliant white. This reflec-tivity is uniform, regardless of the angle of combined light source and viewing. The product may be tinted, using low amounts (<2%) of transparent pigment concentrates. At-tractive muted shades of red, orange, brown, green, blue, purple and charcoal gray may be obtained. Please consult a US Reflector representative for technical assistance on suitable colorants.
Order Reference numbers
Ref # Description Qty / Gallons / Part #
1 5 25 55
SBT-7 - (color) Cotton fabric SBT-7-1 SBT-7-5 SBT-7-25 SBT-7-55
SBT-8 - (color) Nylon & Spandex fabric SBT-8 -5 SBT-8 -25 SBT-8 -25 SBT-8 -55
COLORS Sphere-Brite® reflective ink for fabrics is available in several standard colors. Most popular is grey day white reflective at night as shown in images. Clear ink shows no visible images by day but reflects white at night cre-ating a virbrant visible reflective surface for safety and night visibility.
TM
SU LED - Safety Products - Marker & Delineators
™
Reflective Paint™ SPHERE-BRITE®
Retro-Reflective Latex Water Base LatexReflective street paint
All surfaces
Easy to use BENEFITSHigh reflectivity
Durable
Reflectorize all surfaces
•
•
•
•
•
•
CHARACTERISTICS
Sphere-Brite® 6000 Series are fast drying, single-package water-thinned latex coating. Available in a variety of colors SB 6000 produces a retro-reflective matte finish for night visibility.
Sphere-Brite® 6000 can be applied to a wide variety of substrates including but not limited to: • Bare galvanized steel • Properly prepared and primed mild steel and aluminum • Previously painted metals • Bare concrete that is clean and aged at least 3 months • Asphalt pavement • Primed wood • Plastics When increased night time visibility is required, Sphere-Brite® 6000 Series reflective street paint may be applied over virtually any clean, contaminant-free solid surface. When applied as directed, the dry film produces vibrant day time color, and at night, or conditions of low visibility, will reflect point source light back to the source as brilliant white. This reflectivity is uniform, regardless of the angle of combined light source and viewing.
TRAFFIC PRO 6000REFLECTIVE STREET PAINT
Sphere-Brite® 6000 Series colors are available in Grey, Blue, Green, Fluorescent Blaze Orange, Fluorescent Rocket Red and Translu-cent Clear. Each color reference provides convenient and instant re-flectivity wherever increased night time visibility is needed for safety applications or applications associated with technical engineering were re-flective light coefficient readings is required. Sphere-Brite® 6000 is ideal for reflectorizing various highway & road surfaces, signs, signposts, curbs, bol-lards and many other surfaces. Industrial uses include the production of reflective surfaces on virtually any solid substrate.
Product Part #: SB-6000- ColorPackaged in 1& 5 gallon pails and 55 gallon drums.
For more information please contact your sales representative or US Reflector Toll Free: 800 414-5024 / www.usreflector.com
TM
SU LED - Safety Products - Marker & Delineators
HardwareTM
SU Marker Posts - Safety Equipment - Delineators
™ SIGN-GUARD
Single piece design
Sign bolts included
Single & double sided
Fits all fences & poles BENEFITSQuick installationStrong & durableUse for ALL sign mounting
•
•
•
•
•••
CHARACTERISTICS Quick lock Self-support Signs-Fences-Banners
2” Sign-Guard Is a self contained fence & post anchor that can be used for mounting signs & banners quickly and easily while eliminating protruding dangerous screws and sharp edges.
Sign-Guard is perfect for fence and post hook attachment allowing fire extinguishers and other maintenance devices to be easily accessible.
The 2” instant sign support anchor is built with a 1” reversible 1-Way R Bolt making sign mounting quick and effortless.
usreflector.com
Part # Description Chain link mesh Truss & Hex Nut
Units per bag
Units per case
SG-NGRY Grey nylon 6/6 & Zinc alloy bolt 1.75”, 2”, & 2.25” 5/16” - 18 10 250SG-NBLK Black nylon 6/6 & Zinc alloy bolt 1.75”, 2”, & 2.25” 5/16” - 18 10 250
SAFE Avoid dangerous fastening systems that use protruding bolts. No sharp edges or protrusions that can cause injury to children and general public
LABOR COST CUT IN HALF One person can easily install and tighten bolts from one side of a fence eliminating a second person holding a wrench on the back of a sign bracket.
EASY INSTALLATION Vertical and horizontal travel to align holes. Nut-slot feature keeps nut from falling out and turning while tightening bolt. Second nut can be added for back to back sign mounting. Sign-Guard is built with a retainer screw which holds anchor in place while mounting.
ATTACHMENTS Sign-Guard attaches signs, banners and even hook devices to fences and poles providing an efficient universal scalable anchor system that is safe, reusable and cost effective.
DURABLE & STRONG Made with nylon 6/6 and a Zinc Alloy Bolt. Withstands extreme winds, pulling forces and vandalism. Set-it and for-get -it makes the Sign-Guard stand by its name.
Sign Guard with 1” Reversible 1-Way R Bolt
ADVANTAGES
Quickly attach signs & reflectors to fences and poles. Fits all standard chain link fences, P9 posts, and uni-strut poles.
YES NO
FENCES POLES BANNERS
FENCE HOOKS SCHOOLS POOLS
FAST INSTALLATION CORROSION FREE STRONG & DURABLE
ACCESSORIES
SECURE SIGNS AND BANNERS
www.usreflector.com
2” CHAIN LINK FENCE MOUNTS
Finally sign and banner installers have a system specifically designed to attach signs and banners to chain link fences. SignGrabber’s patent pending design allows safe, attractive, and tamper-resistant installation of signs and banners that is superior to any solution used before.
ATTACH SIGNS AND BANNERS EFFORETSLY
Page A-9Prices reflect single units only, please contact your sales representative for quantity pricing
SIGN GRABBER Attach signs, banners, and reflectors to Fences and posts with 1 bolt
ITEM # Description Available box Qty PriceSG1-1 Fits 1” chain link fence 1 24 48SG2-2 Fits 2” chain link fence 1 24 48SGP-1 Fits U-channel and square posts 1 24 48S1T1 Combo kits 8 of each 1 24 48
Features & Benefits: Fits U-Channel and square posts Sturdy die-cast metal Tamper-resistant hardware
Potential Markets: Municipal Signage Commercial sites and parking lot
Signs Industrial sites
Sign Grabber is a cast metal mounting unit that fits snugly into the diamond shaped hole of 2” industry standard chain link fence. Included with each sign grabber is a one-way security bolt that attaches your sign or banner securely. The three-way adjust-able slotted design allows perfect align-ment for signs of any size or shape, and the recessed nut retaining system makes single-handed installation quick and easy.
SignGrabber P mounting system for Post Mounted signs.
1” CHAIN LINK FENCE MOUNTS
Sign Grabber 1 fits all 1” industry stan-dard chain link fences. Mounting unit fits snugly into the diamond shaped hole.Included with each sign grabber is a one-way security bolt that attaches your sign or banner securely. The two-way adjust-able slotted design allows perfect align-ment for signs of any size or shape, and the recessed nut retaining system makes single-handed installation quick and easy.
INSTALLATION SignGrabber 1 and 2Put bolt through top hole in sign, through SignGrabber, attach nut, and leave loose.
Line up bottom sign hole with available hole in SignGrabber.
Turn SignGrabber as necessary to line up. Put bolt in either long or short slot (single slot on SignGrabber 1) and attach and tighten both nuts.
The SignGrabber P has been designed for mounting signs to formed metal poles with regular spaced holes (u-channel and square sign posts). Used with one-way bolts they act as a non-removable nut, thus adding tamper resistance to the installation. The cast alloy used will not rust.
DIMENSIONS