Click to edit Master text styles

Make Interactive Videoswith PowerPoint and Office Mix

Failures occur in polyethylene pipe lines, with the fluids running through these pipelines being a very valuable commodity. (Water ,Waste Water , Gas, Chemicals)

The environmental impact on failures in the processing and mining industry can have catastrophic affects and this needs to be prevented.PIPETEST AUSTRALIA personnel have extensive experience in the field of failure analysis on these pipelines and wants to prevent failures by Inspections , Testing.

Click to edit Master text styles

First download Office Mix, a free PowerPoint add-in

Insert videos, polls, and other interactive content into your presentation.

Record your voice and draw on your slides while you present.

Share your Mix online—it plays back on any device.

Track how people use your Mix.

Get Office Mix

Tip: Press Shift+F5 to make this link clickable.

1

2

3

4

CLICK TO DOWNLOAD

With Office Mix you can:

Fittings need to be inspected and tested to verify the components are fit for purpose in there application. The manufactured fittings used in Australia are manufactured in Australia as well as being imported from oversea countries .PIPETEST AUSTRALIA personnel have extensive experience in the manufacturing and engineering of polyethylene components and supply Quality control and quality Assurance services .• Component verification inspections.• Inspection and test plans verification.• Carry out Materail testing (MFI

Test ,Moisture Test ,OIT Tests).• Component dimensional and thickness

inspections .

Click to edit Master text styles

After you install Office Mix…

Open PowerPoint.

Explore the tools on the new Mix tab—they’re just a tap away.

Get started!

1

2

The use of polyethylene material in pipe and fittings has high toughness ,excellent resistance to crack growth and rapid crack propagation.They also have inherent resistance to water and many chemicals.• AS/NZS 4131 PE100 Pre Compound

material standard.• AS/NZS 4130 PE100 pipes standard .• AS/NZS 4129 PE100 EF and fitting Standard.PIPETEST AUSTRALIA can do all the inspections and testing leaving the client with confidence in there pipelines .

Click to edit Master text styles

See for yourself

• Install Mix• Record audio, video, and ink• Securely upload and share your video

In this short video, you’ll learn how to: Tip: Press Shift+F5 to make this link clickable.

CLICK TO SEE THIS

MIX IN YOUR BROWSER

Polyethylene pipe and fittings are widely used in the domestic gas and coal steam gas networks through out Australia.The use of butt fusion welding and electro fusion welding in commonly use to join the pipes and fittings to make a leak free joint .The butt fusion welding is carried out as per the International ISO 21307 standard .PIPETEST AUSTRALIA provide a service for making sure your next project run well by verifying and calibrating the welding machines ,Qualifying the welding personnel , and verifying welding parameters and procedure at the start of the project.

Learn more at mix.office.com

Get Office Mix

PIPETEST AUSTRALIA can carry out inspection and testing services on new and existing projects .• Existing pipe line thickness surveys can

also be carried out on site .• On Site Project QA/QC on all pipeline

project .• Experience QA/QC inspections on

manufacture and welding of steel pipeline tight fit HDPE lining systems.

• Inspection and testing pays a big role in making sure the pipelines are fit for the job they are engineered for .