Power Plant Components and Engineering Package Offered · Power Plant Components and Engineering...

Power Plant Components and Engineering Package Offered All procured equipment Complete design documentation of power block (drawings, speciﬁcations, calculations 3D modeling, etc.) This Unit 1 power block is a coal-fire electric generating unit comprising a nominal 600 MW GE steam turbine, tandem-compound 4-flow single reheat unit with throttle conditions of 3500 psig, 1050°F/1100°F. The Alstom steam generator is rated at approximately 4,650,000 lbs per hour capable of burning bituminous coal only or a combination of bituminous coal and petcoke (up to a 70%/30% blend). Coal pulverizers have significant design margin operating at ~70% for MCR firing. The plant design heat rate with this power block is 8725 BTU/kw-hr with tubine control valves wide open (VWO) and average ambient conditions in southeastern U.S. with a circular mechanical forced draft cooling tower, an electrostatic precipitatior, and a wet limestone flue gas desulphurization system. All cycle design has been incorporated into the equipment for sale, and cycle information is available for all other normally desired conditions. Included with the block procurement of the equipment listed for sale is the design documentation of the power block. This includes all drawings, specifications calculations, 3D modeling, etc. at the stage that currently exists. For sale separately are the continued services of the engineer of record for this design. A summary of the status of design is as follows. All design associated with the equipment listed is complete as are the foundations and buildings for the boiler, coal silo bay, and turbine building, including all foundations which are of a heavy mat design on piles that can easily transfer to other locations. The General Arangement of the power block is fairly standard and completely developed for the critical piping, which is included in the equipment for sale. Balance-of-plant equipment and facilities have all been specified and are ready for procurement. The plant back-end design can be adjusted to match the buyers air emissions requirements, and the fully developed site layouts can be adjusted to meet the buyer’s site conditions. All P&IDs are complete as is preliminary piping and electrical physical design. A comprehensive PrimaVera level 3 schedule of procurement, engineering, construction, and start-up is developed based upon the existing site construction plan. Dependent upon the timing of the purchase, the existing engineering and design team can be assigned to the buyers project. This team specifically produced this design and many were responsible for two other recently and successfully completed 600 MW units. Major equipment status is listed on the back page. Continued engineering services of the Engineer of Record - WorleyParsons

Upload
others
Category

Documents
view
10
download
0

Embed Size (px):

Transcript of Power Plant Components and Engineering Package Offered · Power Plant Components and Engineering...

Power Plant Components and Engineering Package Offered

�All procured equipment

�Complete design documentation of power block (drawings, specifications,calculations 3D modeling, etc.)

ThisUnit1powerblockisacoal-fire electricgeneratingunitcomprisinganominal600MWGEsteamturbine, tandem-compound4-flow singlereheatunitwiththrottleconditionsof3500psig,1050°F/1100°F.TheAlstomsteam generatorisratedatapproximately4,650,000lbsperhourcapableofburningbituminouscoalonlyoracombination ofbituminouscoalandpetcoke(uptoa70%/30%blend).Coalpulverizershavesignificant designmarginoperating at~70%forMCRfiring.

Theplantdesignheatratewiththispowerblockis8725BTU/kw-hrwithtubinecontrolvalveswideopen(VWO) and average ambient conditions in southeastern U.S. with a circular mechanical forced draft cooling tower, an electrostaticprecipitatior,andawetlimestoneflue gasdesulphurizationsystem.Allcycledesignhasbeen incorporated into the equipment for sale, and cycle information is available for all other normally desired conditions.

Included with the block procurement of the equipment listed for sale is the design documentation of the power block. Thisincludesalldrawings,specifications calculations,3Dmodeling,etc.atthestagethatcurrentlyexists.Forsaleseparately are the continued services of the engineer of record for this design. A summary of the status of design is as follows.

All design associated with the equipment listed is complete as are the foundations and buildings for the boiler, coal silo bay, and turbine building, including all foundations which are of a heavy mat design on piles that can easily transfertootherlocations.TheGeneralArangementofthepowerblockisfairlystandardandcompletelydeveloped forthecriticalpiping,whichisincludedintheequipmentforsale.Balance-of-plantequipmentandfacilitieshaveall beenspecified andarereadyforprocurement.Theplantback-enddesigncanbeadjustedtomatchthebuyersair emissionsrequirements,andthefullydevelopedsitelayoutscanbeadjustedtomeetthebuyer’ssiteconditions. AllP&IDsarecompleteasispreliminarypipingandelectricalphysicaldesign.AcomprehensivePrimaVeralevel3 schedule of procurement, engineering, construction, and start-up is developed based upon the existing site construction plan. Dependent upon the timing of the purchase, the existing engineering and design team can be assignedtothebuyersproject.Thisteamspecifically producedthisdesignandmanywereresponsiblefortwoother recentlyandsuccessfullycompleted600MWunits.Majorequipmentstatusislistedonthebackpage.

�Continued engineeringservices of the Engineer of Record - WorleyParsons

vccrim

Text Box

SALE #2851 - SALE OF POWER GENERATION ASSETS POWER PLANT COMPONENTS FLYER SCHEDULE 6

vccrim

Stamp