Power Mod - Siemens · to Power Mod lug selector and choose Standard Tapbox as enclosure type or...
Transcript of Power Mod - Siemens · to Power Mod lug selector and choose Standard Tapbox as enclosure type or...
2M
ETER
CE
NTER
S
Siemens Industry, Inc. SPEEDFAX™ 2011 Product Catalog2-70
Mul
ti-f
amil
y M
eter
ing
Power Mod Tapboxes: WTB Tapboxes Introduction
Standard TapboxesStandard tapbox modules (type WTB) are designed for versatility, space savings, and flexibility.
Features include:n QuickSystem™ features
n Standard compression lug capability
n Invertibility: devices can be rotated to accommodate the desired incoming feed direction
n 750 kcmil AL wire options for most models
n 100K AIC standard for all models
n Broad ampacity ratings from 400 to 1600 Amps
n Line and load capability- service entrance and sub feed rated
Standard Tapboxes Quick Reference
n 400-1600A
n 1200A thru-bus rating
n UL Standard # UL67
n UL file # E27100
n AIC rating (100K AIC)
n Voltage
- Single phase 120/240V AC max
- Three phase 240V AC max
n All swing latches and rivets are stainless steel.
n NEMA 3R rated
n G90 galvanized steel
n ANSI 61 paint
n Custom options now available! Details on page 2-109
2M
ETER CENTERS
Siemens Industry, Inc. SPEEDFAX™ 2011 Product Catalog 2-71
Multi-fam
ily M
etering
Power Mod Tapboxes: WTB Tapboxes – 1Ø and 3Ø
Tap box modules: 1-phase, 3-wire WN, 120/240V AC, 100k AIC
Catalog number
Ampere rating
Service feed
Dimensions (inches) Line side connections(lugs not included)
Knockout DiagramHeight Width Depth
WTB1400CU 400 OH/UG 40.13 12.22 13.19 1 set of 2 studs T-1 page 2-72
WTB1800CU 800 OH/UG 40.13 12.22 13.19
2 sets of 2 studs
T-2 page 2-72
WTB11200CU 1200 OH/UG 47.13 15.22 13.31 T-3 page 2-72
WTB11600CU 1600 OH/UG 49.09 25.09 13.81 3 sets of 2 studs T-4 page 2-72
Tap box modules: 3-phase, 4-wire SN, 240V AC Max., 100k AIC
Catalog number
Ampere rating
Service feed
Dimensions (inches) Line side connections(lugs not included)
Knockout DiagramHeight Width Depth
WTB3400CU 400 OH/UG 40.13 12.22 13.19 1 set of 2 studs T-1 page 2-72
WTB3800CU 800 OH/UG 40.13 12.22 13.19
2 sets of 2 studs
T-2 page 2-72
WTB31200CU 1200 OH/UG 60.31 15.22 17.75 T-3 page 2-72
WTB31600CU 1600 OH/UG 49.09 25.09 13.81 3 sets of 2 studs T-4 page 2-72
Dimensions shown are representative of outside box dimensions and do not include allowances for mount-ing bumps, hubs, or hardware protrusions.
Module is invertible- rotate device to point hub open-ings to appropriate feed direction.
Lugs not included. Refer to page 2-110 forlug size options.NEMA II Stud Pattern lugs must be installed by user or utility.
QuickConnect not included. If used for load side appli-cation an additional coupler must be ordered.
1200 Amp maximum feed per side- must be used as a center fed main.
Lugs not included. Refer to page 2-110 for lug size options. NEMA II Stud Pattern lugs must be installed by user or utility.
Product Category RESI
Main Features:■ Invertible
■ 400 to 1600 amp models
■ Up to 750 kcmil lugs available
• Revised •05/09/12
2M
ETER
CE
NTER
S
Siemens Industry, Inc. SPEEDFAX™ 2011 Product Catalog2-72
Mul
ti-f
amil
y M
eter
ing
Power Mod Tapboxes: WTB Tapboxes Knockout Diagrams
T-1
WTB1400CU
WTB3400CU
T-2
WTB1800CU
WTB3800CU
T-3
WTB11200CU
T-4
WTB11600CU
WTB31600CU
• Revised •05/09/12
2M
ETER CENTERS
Siemens Industry, Inc. SPEEDFAX™ 2011 Product Catalog 2-73
Multi-fam
ily M
etering
Power Mod Tapboxes: WET Tapbox - Pullbox Combinations Introduction
Tapbox - Pullbox CombinationsEUSERC - compliant Tapbox-Pullbox Combination modules (type WET) offer EUSERC compatibility, a wider range of lug options, and extra space for pulling in conductors.
Features include:n QuickSystem™ features
n Standard compression lug capability
n 750 kcmil AL wire options for most models
n 100K AIC standard for all models
n Broad ampacity ratings from 400 to 1200 Amps
n Removable bottom endwall
Tapbox- Pullbox Combination Quick Reference
n 400-1200A
n 1200 Amp thru-bus rating
n UL Standard #’s UL67
n UL file # E27100
n AIC Rating (100k)
n Voltage
- Single phase 120/240V AC max
- Three phase 240V AC max
n All swing latches and rivets are stainless steel.
n NEMA 3R rated
n G90 galvanized steel
n ANSI 61 paint
n EUSERC drawing number 315
n Custom options now available! Details on page 2-109
2M
ETER
CE
NTER
S
Siemens Industry, Inc. SPEEDFAX™ 2011 Product Catalog2-74
Mul
ti-f
amil
y M
eter
ing
Power Mod Tapboxes: WET Tapbox - Pullbox Combinations – 1Ø and 3Ø
Lugs not included. Refer to page 2-110for lug size options. NEMA II Stud Pattern lugs must be installed by user or utility.
EUSERC tap box modules: 1-phase, 3-wire SN, incoming, 120/240V ACMeets EUSERC requirements, 100k AIC
Catalog number
Ampere rating
Service feed
Dimensions (inches) Line side connections(lugs not included)
Knockout DiagramHeight Width Depth
WET1400BU 400 UG 46.19 17.63 8.56 1 set of 2 studs ET-1 page 2-75
WET1800BU 800 UG 50.19 27.13 11.38 2 sets of 2 studs ET-2 page 2-75
WET11200BU 1200 UG 50.19 35.19 11.38 3 sets of 2 studs ET-3 page 2-75
EUSERC tap box modules: 3-phase, 4-wire SN, incoming, 240V AC max.Meets EUSERC requirements, 100k AIC
Catalog number
Ampere rating
Service feed
Dimensions (inches)Line side connections(lugs not included)
Knockout DiagramHeight Width Depth
WET3400BU 400 UG 46.19 17.63 8.56 1 set of 2 studs ET-1 page 2-75
WET3800BU 800 UG 50.19 27.13 11.38 2 sets of 2 studs ET-2 page 2-75
WET31200BU 1200 UG 50.19 35.19 11.38 3 sets of 2 studs ET-3 page 2-75
Dimensions shown are representative of outside obx dimensions and do not include allowances for mount-ing bumps, hubs, or hardware protrusions.
QuickConnect not included. Service entrance rated only.
Lugs not included. Refer to page 2-110 for lug size options. NEMA II Stud Pattern lugs must be installed by user or utility.
Product Category RESI
Main Features:■ 400 to 1200 amp models
■ Up to 750 kcmil lugs available
• Revised •05/09/12
2M
ETER CENTERS
Siemens Industry, Inc. SPEEDFAX™ 2011 Product Catalog 2-75
Multi-fam
ily M
etering
Power Mod Tapboxes: WET Tapbox - Pullbox Combinations Knockout Diagrams
ET-1
WET1400BU
WET3400BU
ET-2
WET1800BU
WET3800BU
ET-3
WET11200BU
WET31200BU
2M
ETER
CE
NTER
S
Siemens Industry, Inc. SPEEDFAX™ 2011 Product Catalog2-76
Mul
ti-f
amil
y M
eter
ing
Power Mod Tapboxes: WT Feed Thru Tapboxes Introduction Specifications
Feed Thru TapboxIntroducing the New Siemens Feed Thru Tapbox. The Feed Thru Tapbox features cable in cable out lugs. Valuable for use in mid rise and high rise projects.
Features include:n QuickSystem features
n Standard compression lug capability
n 250kcmil AI wire options
n 100k AIC standard
n Removable bottom endwell
Feed Thru Tapbox Quick Reference
n 1200A
n 1200A thru bus
n UL standard 67
n UL file no. E27100
n AIC rating (100k AIC)
n Voltage:
- Single phase 120/240V AC max.
- Three phase, 240V AC max
n All swing latches and rivets are stainless steel.
n NEMA 3R rated
n G90 stainless steel
n ANSI 61 paint
n Custom options now available! Details on page 2-109
2M
ETER CENTERS
Siemens Industry, Inc. SPEEDFAX™ 2011 Product Catalog 2-77
Multi-fam
ily M
etering
Power Mod Tapboxes: WT Feed Thru Tapboxes – 1Ø and 3Ø
Lug kits not included. (2) Lug kits must be ordered separately per module. Refer to Power Mod lug selector and choose Standard Tapbox as enclosure type or reference page 2-110in Speedfax.
Feed Thru Tapbox modules, 100k AICb
Catalog number Phase Amp rating Service feed
Dimensions (inches) a
Line side conectionscKnockout DiagramHeight Width Depth
WT11200PU 120/240V AC 1200 OH/UG 68.34 35.19 11.41 3 sets of 2 studs WP-1 page 2-78
WT31200PU 240V AC max 1200 OH/UG 68.34 35.19 11.41 3 sets of 2 studs WP-1 page 2-78
a Dimensions shown are representative of outside box dimensions and do not include allowances for mount-ing bumps, hubs, or hardware protrusions.
b QuickConnect not included. If used for load side appli-cation an additional coupler must be ordered.
c Lug kits not included. (2) Lug kits must be ordered separately per module. Refer to Power Mod lug selec-tor and choose Standard Tapbox as enclosure type or reference page 2-110 in Speedfax.
Product Category RESI
Main Features:n Allows to feed conductors
in and out for riser applications
2M
ETER
CE
NTER
S
Siemens Industry, Inc. SPEEDFAX™ 2011 Product Catalog2-78
Mul
ti-f
amil
y M
eter
ing
Power Mod Tapboxes: WT Feed Thru Tapboxes Knockout Diagrams
WP-1
WT11200PU
WT31200PU
2M
ETER CENTERS
Siemens Industry, Inc. SPEEDFAX™ 2011 Product Catalog 2-79
Multi-fam
ily M
etering
P-2
Width
WMMB1800WMMB3800
19.4425.94
EUSERC compliant pullbox modules: 3-phase, 4-wire SN, incoming, 240V AC max.
Catalog number
Ampere rating
Withstand ratingb
Service feed
Line terminal lugs no. and size per line and netural
Dimensions (inches)a
Load side wire size
Knockout DiagramHeight Width Depth
WMMB3400 400 65,000 UG 1 set of 2 studs 37.50 16.69 7.47 2 # 1-500MCM P-1
WMMB3800 800 65,000 UG 2 set of 2 studs 45.50 25.94 10.85 4 # 1-500MCM P-2
WMMB31200 1200 65,000 UG 3 sets of 2 studs 47.50 33.83 10.85 6 # 1-500MCM P-3
a Dimensions shown are representative of outside box dimensions and do not include allowances for mounting bumps, hubs, or hardware protrusions.b Devices rated for 22,000. 65,000 rating requires cables to be tied together. Please see instructions with pullbox for details.c Cables per phase: WMMB1400 (2) WMMB1800 (4) WMMB11200 (6) WMMB3400 (2) WMMB3800 (4) WMMB31200 (6)
EUSERC compliant pullbox modules: 1-phase, 3-wire SN, incoming , 120/240V AC max.
Catalog number
Ampere rating
Withstand ratingb
Service feed
Line terminal lugs no. and size per line and netural
Dimensions (inches)aLoad side wire size
Knockout DiagramHeight Width Depth
WMMB1400 400 65,000 UG 1 set of 2 studs 37.50 16.69 7.47 2 # 1-500MCM P-1
WMMB1800 800 65,000 UG 1 set of 2 studs 45.50 19.44 10.85 4 # 1-500MCM P-2
WMMB11200 1200 65,000 UG 3 sets of 2 studs 47.50 25.94 10.85 6 # 1-500MCM P-3
WW
P-1
WMMB1400WMMB3400
P-3
Width
WMMB11200WMMB31200
25.9433.83
Power Mod Pullboxes – 1Ø and 3Ø
Product Category RESI
• Revised •05/09/12
2M
ETER
CE
NTER
S
Siemens Industry, Inc. SPEEDFAX™ 2011 Product Catalog2-80
Mul
ti-f
amil
y M
eter
ing
Catalog numbersBusway applicationSiemens offers a direct busway to modular metering con-nection. When six or less disconnects are present a connec-tion can be made directly to the meter module. If a main is needed Siemens offers breaker options up to 1200 Amps and switch options up to 800 Amps.
All breaker and switch modules are available with up to 100,000 AIC ratings, are UL listed, and carry a NEMA 1 (indoor) rating. Common service entrance modules are listed below. Lead time may apply. See diagrams to the right for spacing considerations.
Tap Stacksa Tap stacks save space by connecting Siemens Sentron Busway directly to specially designed Siemens circuit breaker and switch modules. Common modules are listed below. Tap stacks require end-user to purchase additional QuickConnect coupler and are for indoor use on end-feed applications only.
a Tap stacks are produced with the busway. Contact sales office for more information.
Common Bus Duct Units: 3-phase, 4-wire SN, incoming, 240V AC max.be
Catalog numberAmpereratingd
Dimensions (Inches)a
Mechanismtype AIC ratingc
Knockout DiagramHeight Width Depth
MC44BD 400 33.00 15.00 10.44 JXD2 breaker 65,000 BD-1 page 2-81
MC64BD 600 33.00 15.00 10.44 LXD6 breaker 65,000 BD-2 page 2-81
MC84BD 800 43.00 20.00 10.44 MXD6 breaker 65,000 BD-3 page 2-81
MC104BD 1000 47.00 20.00 10.44 NXD6 breaker 65,000 BD-4 page 2-81
MC124BD 1200 47.00 20.00 10.44 NXD6 breaker 65,000 BD-5 page 2-81
MC44UBD 400 33.00 15.00 10.44 HJXD2 breaker 100,000 BD-1 page 2-81
MC64UBD 600 33.00 15.00 10.44 HLXD6 breaker 100,000 BD-2 page 2-81
MC84UBD 800 43.00 20.00 10.44 HMXD6 breaker 100,000 BD-3 page 2-81
MC104UBD 1000 47.00 20.00 10.44 HNXD6 breaker 100,000 BD-4 page 2-81
MC124UBD 1200 47.00 20.00 10.44 HNXD6 breaker 100,000 BD-5 page 2-81
MS44UBD 400 33.00 15.00 14.94
Class T fuse 100,000 BD-6 page 2-81MS64UBD 600 33.00 15.00 14.94
MS84UBD 800 33.00 15.00 14.94
a Dimensions shown are representative of outside box dimensions and do not include allowances for mount-ing bumps, hubs, or hardware protrusions.
b All devices are build to order. Tap stack and QuickConnect sold separately.
QuickConnect (QC)
d Alternate amperages for breaker modules available. Contact sales office for more information.
e Single phase bus duct devices are available. Contact sales office for more information.
Power Mod Main Disconnect Devices with Bus Duct Connection: Introduction and Catalog Numbers
• Revised •05/09/12
2M
ETER CENTERS
Siemens Industry, Inc. SPEEDFAX™ 2011 Product Catalog 2-81
Multi-fam
ily M
etering
Power Mod Main Disconnect Devices with Bus Duct Connection: Knockout Diagrams
BD-1MC44BD
MC44UBD
BD-4MC104BD
MC104UBD
BD-6MS44UBD
BD-7MS64UBD
BD-8MS84UBD
BD-5MC124BD
MC124UBD
BD-2MC64BD
MC64UBD
BD-3MC84BD
MC84UBD
• Revised •05/09/12