POWER GRID AUTOMATION - Ecil · PDF file- Celesc; - Celg Distribuição; - Cemar;...
4
POWER GRID AUTOMATION RECLOSER AND THREE PHASE POLE-TOP AR-1000/15kV RECLOSER If a momentary failure is detected, the electric power will be automatically recon- nected. AR-1000-15kV Recloser is a control bay for distribution automation, designed to operate in the power distribution networks or substations. INNOVATION AND PRODUCT DEVELOPMENT Ecil Energia develops and supplies Reclosers and Load Breakers for on overhead distribution lines and substa- tions, ready for the Smart Grid environ- ment. Specially in Brazilian Power Utilities, Ecil Energia has more than 6,000 reclo- sers installed, benefiting over 32 million energy end-users with more reliable and quality power. The products are installed in over 12 Brazilian states, serving major power utilities, among them: - AES Eletropaulo; - Celesc; - Celg Distribuição; - Cemar; - Cemig; - Ceron; - CPFL Energia; - Grupo Energisa; - Coelce | Endesa; - EDP Bandeirante & EDP Escelsa; - Elektro; - Eletrobras; - RGE. More details about our product line and solutions can be found at: www. ecilenergia.com.br Sales | R&D 105 Calçada dos Gerânios, Centro Comercial de Alphaville, Zip Code: 06453-014 Barueri, SP, Brasil Phone: 55 11 4133-1440 Fax: 55 11 4195-4506 [email protected] www.ecilenergia.com.br Its working principle is based on the automatic detection of a fault in the power network, opening the circuit an reconecting the load, following pre- sets of protection philosophy. After the preset period, the recloser will automat- ically restore the electric power. If the problem persists, the recloser will execute the cycle again. TECHNICAL FEATURES • Protection and control functions; • ANSI Curves, IEC and user defined; • Independent module for activation of the magnetic actuator; • Input voltage: AC/DC 110/220V (auto-range); • Has up to 12 digital inputs and 12 digital outputs; • Front and rear communication ports; • Bluetooth Communication and Wi-Fi for parameterization; • DNP 3.0 Protocol and IEC 61850; • Configuration by AcSelerator software (in portuguese/ english); • Programmable logics; • Self-Healing logics; • Function 25 - Sync check; • Function 67 - Directional over-current; • Programmable automation functions; • Event Log with oscillographic; • Metering for protection. PHISICAL FEATURES • Steel Cabinet (galvanized or stainless) with double walls; • Battery for operation without power, auxiliary to 24 hours; • Custom Pushbutton.
Transcript of POWER GRID AUTOMATION - Ecil · PDF file- Celesc; - Celg Distribuição; - Cemar;...
POWER GRID AUTOMATIONRECLOSER AND THREE PHASE POLE-TOP
AR-1000/15kV RECLOSER
If a momentary failure is detected, the electric power will be automatically recon-nected.
AR-1000-15kV Recloser is a control bay for distribution automation, designed to operate in the power distribution networks or substations.
INNOVATION AND PRODUCT DEVELOPMENT
Ecil Energia develops and supplies Reclosers and Load Breakers for on overhead distribution lines and substa-tions, ready for the Smart Grid environ-ment.
Specially in Brazilian Power Utilities, Ecil Energia has more than 6,000 reclo-sers installed, benefiting over 32 million energy end-users with more reliable and quality power.
The products are installed in over 12 Brazilian states, serving major power utilities, among them:- AES Eletropaulo;- Celesc;- Celg Distribuição;- Cemar;- Cemig;- Ceron;- CPFL Energia;- Grupo Energisa;- Coelce | Endesa;- EDP Bandeirante & EDP Escelsa;- Elektro;- Eletrobras;- RGE.
More details about our product line and solutions can be found at:www. ecilenergia.com.br
Sales | R&D 105 Calçada dos Gerânios,Centro Comercial de Alphaville,Zip Code: 06453-014Barueri, SP, BrasilPhone: 55 11 4133-1440Fax: 55 11 4195-4506 [email protected]
Its working principle is based on the automatic detection of a fault in the power network, opening the circuit an reconecting the load, following pre-sets of protection philosophy.
After the preset period, the recloser will automat-ically restore the electric power. If the problem persists, the recloser will execute the cycle again.
TECHNICAL FEATURES• Protection and control functions;• ANSI Curves, IEC and user defined;• Independent module for activation of the magnetic actuator;• Input voltage: AC/DC 110/220V (auto-range);• Has up to 12 digital inputs and 12 digital outputs;• Front and rear communication ports;• Bluetooth Communication and Wi-Fi for parameterization;• DNP 3.0 Protocol and IEC 61850;• Configuration by AcSelerator software (in portuguese/ english);• Programmable logics;• Self-Healing logics;• Function 25 - Sync check;• Function 67 - Directional over-current;• Programmable automation functions;• Event Log with oscillographic; • Metering for protection.
PHISICAL FEATURES• Steel Cabinet (galvanized or stainless) with double walls;• Battery for operation without power, auxiliary to 24 hours;• Custom Pushbutton.
POWER GRID AUTOMATIONRECLOSER AND THREE PHASE POLE-TOP
Sales | R&D 105 Calçada dos Gerânios,Centro Comercial de Alphaville,Zip Code: 06453-014Barueri, SP, BrasilPhone: 55 11 4133-1440Fax: 55 11 4195-4506 [email protected]
P R I N C I P A I S C O M P O N E N T E S D O A R - 1 0 0 0
• SEL751-A or SEL-751 Relays; • Other options on request.
POWER SUPPLY MODULE• Power for DC-1000 Drive Controller; • Rechargeable Battery;• Monitoring of battery and of the auxiliary voltages; • Auxiliary power for modem, radio and etc.
DC-1000 MODULE (DRIVE CONTROLLER)
DC-1000 is an intelligent and adaptable module that activates the magnetic actuator, responsible for operation of the breakers mechanism. It has dry contact inputs, that is, in the panel, just install conventional button consoles for the open and close command.
• Responsible for the action, self-monitoring and monitoring of the CHZ13-15.5/D630-20 Three Phase Pole-Top;• Eliminates the need for internal electronic circuits of the switches (e.g.: Nulec, Cooper) that can be damaged with time;• A special control cable (cord) is supplied to connect the AR-1000 control to the switch or the original cable is reworked. In cases of retrofits of existing breakers (ABB/Cooper/ Schneider).
** Ecil Energia supplies the complete command panel, with battery, charger and control panel with button consoles, meeting the exact need of each customer.
MAIN COMPONENTS OF AR-1000/15kV RECLOSER
POWER GRID AUTOMATIONRECLOSER AND THREE PHASE POLE-TOP
DIMENSIONS OF AR-1000/15kV RECLOSER
POWER GRID AUTOMATIONRECLOSER AND THREE PHASE POLE-TOP
Current TransformersPrimary current, A 630Secondary current, A 1 ou 5Precision 5P10Capability 2.5VA
Specification - Technical Parameters
Withstand voltage Dry, 1 minute/60Hz 15.5kVWithstand voltage Dry, 1 minute/60Hz 50kVWithstand voltage, 10 seconds over rain (peak) 45kVRated impulse voltage (peak) 110kVRated current 630ARated current of breaking cable on empty 25ARated breaking current row empty 10ASymmetrical breaking capability 4s (Ik) 20kACapacity for sustainable peak 50kAShort circuit time 4sNominal frequency 50/60Hz
Power Element PerformanceMaximum duty cycle operation at rated current 10.000Current transformers 3Capacitive voltage sensors 6Closing time 55 ms ± 5Opening time 42 ms ± 4Auxiliary contacts 3NC+1NORated operation voltage 220 AC/DCRated operating sequence O-0.2s-CO-2s-CO-2s-CO- closeEach pole main circuit DC resistance ≤ 60µAltitude 2000 mWind speed 34m / s (700Pa on the pole surface)Solar radiation <1.1 kW/m2Operating temperature -40°C... + 55°CType of mechanism Magnetic actuatorMagnetic interference in the secondary circuit 1.6kVProtection Degree IP65Standard ANSI C37.6090% ~100% Rated Short-Circuit Current volume 1645% ~55% Rated Short-Circuit Current volume 4415% ~20% Rated Short-Circuit Current volume 56
![Demand Side Management of Electricity Aiming to Minimize ... · Consumer). For this objective, were used data from CELESC - Distributor of Santa Catarina, Brazil [7]. TABLE I: DEMAND](https://static.fdocuments.in/doc/165x107/5f6553a2bfdf06794120d147/demand-side-management-of-electricity-aiming-to-minimize-consumer-for-this.jpg)
