Power generation from flue gases
description
Transcript of Power generation from flue gases
IntroductionIntroduction
Now a days the power consumption has increased, but the generation of power couldn’t reach that demand. So, we need to generate more power. For this purpose we need many power plants. But, it is not possible in practice, because resources are not sufficient and take more time to construct. So we are looking for new technologies.
Why we choose thisWhy we choose this
As per today’s scenario, we have so many factories
over the world releasing the harmful gases in to the
atmosphere. For the utilization of such gases this
method is used.
ConstructionConstruction
To utilize the gases releasing from factories we
need to place filters inside the chimney. The
filters which are placed in chimney have the
following characteristics.
Requirements of FilterRequirements of Filter
With a specific material that need to satisfy the following requirements:
It need to be an Electron acceptor. Acceptor being conductive. Heat resistive in nature. Alignment of varied filters. And,flow of electrons must be systematic.
Whereas, the small pored filters are at the
top of the chimney making them useful in
collecting the remaining Electrons, and are
free from damage because of the heat
compensation that takes place due to the
atmospheric interaction with heat. So, on
processing these electrons we have a new
production of electricity.
Working ProcessWorking Process
Working ProcessWorking Process
The gases releasing from industries are unstable gases, and
these Gases were no more to be unstable but convert
themselves into Ionic-form of Gases. Due to, huge amounts of
heat evolved in the Industrial processes we have these Ionic
gases ejecting their electrons. If we are able to capture these
electrons and make them to flow in a systematic order, we will
be able to generate Electricity from the principle saying
that:"flow of Electrons is nothing but Electricity".
AdvantagesAdvantages
It is very economical.
Power can be generated throughout the day & it is
not depend on season.
It requires less space.
The generated power can be utilized for industrial
lighting purpose
Dis AdvantagesDis Advantages
Less power generated by this process.
The power generation depends on flue gases
releasing out from the industry.
The filters should have better efficiency,
otherwise more electrons are loss.