Power Factor Correction Capacitors Type LKT - Transfab … FRAKO Power Factor Correction Capacitors...

It‘s all about saving your money!

Power Factor Correction CapacitorsType LKT

Features that matter:

■ Handles continuous current up to 2.25 (60 Hz) / 2.7 (50 Hz) times rated current

■ Withstands inrush current up to 375 (60 Hz) / 450 (50 Hz) times rated current

■ Self-healing type, segmented film techno ogy plus overpressure disconnector

■ Environment-friendly, dry type

■ CO2 emission reduction

■ Saves energy costs

E337088

2

General FeaturesFRAKO Power Factor Correction Capacitors utilize unique advanced technology and incorporate our exclusive triple safety feature. FRAKO is the first power capacitor manu-facturer to succeed in combining segmented capacitor film with self-healing and over-pressure disconnection. This exclusive manufacturing technique significantly increases the reliability of capacitors in power factor and filter applicationsThe capacitors are compliant with:■ UL 810 (up to 600 VAC, 68 °C ambient)■ CSA C22.2 No. 190 (up to 600 VAC, 46 °C ambient)■ IEC 60831 (up to 800 VAC, 68 °C ambient)

Technical FeaturesFor the operation of Power Factor Correction Capacitors three aspects are of utmost importance:■ High current capability■ Long life expectancy■ Triple safety features

High Current CapabilityIn electrical systems containing harmonic producing loads, power factor capacitors must be capable of carrying addi-tional current due to the system harmonics. Even without resonance, harmonics will increase capacitor terminal voltage and increase capacitor current, which can further stress a capacitor making it necessary for a high current capability. If, for example, the 11th harmonic is present with 8% of the rated system voltage, then the rms value of the rated voltage is only slightly increased (about 0.3%), but the current in the capacitor will exceed its rated value by 33%. It becomes clear that the ability of a capacitor to withstand excessive current is much more important than the ability to withstand excessive voltage.


Therefore FRAKO designs its capacitors as follows: ■ Maximum continuous current up to 2.25 (60 Hz) /

2.7 (50 Hz) times rated current■ Withstand inrush current up to 375 (60 Hz) / 450

(50 Hz) times rated current

Highest DurabilityFRAKO capacitors have earned a reputation for superior quality, high reliability and long life expectancy. This is assured by our conservative approach to capacitor design plus skillful manufacturing processes and in-process verification testing. FRAKO sets a new standard for capacitor manufacturing.

Exceeds Industry StandardsOur specifications for capacitors exceed all known industry standards and FRAKO capacitors surpass the requirements of UL, CSA and EN/IEC standards. Additional quality tests following each individual manufacturing step confirm an outstanding manufacturing quality. Through our unique manufacturing process, FRAKO achieves a world leading capacitor of the highest durability.

Exclusive Manufacturing Process for long life

For example, our consistently low power loss throughout the life of the capacitor, is achieved by our use of a proprietary mineral filler and stabilizer which can permanently avoid partial discharges within the dielectric material. Our vacuum drying process takes place under temperature controlled conditions for several days and eliminates the possibility of humidity within the capacitor - which if present would acce-lerate the aging process of a capacitor (reducing capacitor life). This process is an extra effort made by FRAKO but pays off for our customers with a longer life expectancy. Our production processes assure that quality and reliability are built into every capacitor, and this is confirmed by our verification testing

Capacitor current

3

Safety FeaturesFRAKO Power Factor Correction Capacitors offer our exclusive Triple Safety feature:■ Self-healing at over-voltage■ Segmented film increase capacitor integrity and life

expectancy by removing (electrically) small segmentsof film which have been damaged e. g. in the unlikelevent of a failing self-healing process

■ Our patented over-pressure disconnector systemassures safe and quick removal of capacitors fromthe electrical circuit at the end of their life or under asevere overload condition

To verify proper functioning of all internal safety systems, FRAKO regularly draws sample capacitors from the production line and performs multiple tests to confir proper operation of the safety system and to assure our outstanding quality is achieved in every capacitor.

Over-Voltage CapabilityFRAKO Power Factor Correction Capacitors have an over-voltage capability that meets the requirements of EN 60831-1 and -2, IEC 60831-1 and -2, and surpasses the requirements of UL 810:

Rated voltage [VAC]

240 300 400 440 480 500 525 600

Over-voltage [VAC]8 hours daily 264 330 440 484 528 550 578 660

30 min. daily 276 345 460 506 552 575 604 690

5 min. daily 288 360 480 528 576 600 630 720

1 min. daily 312 390 520 572 624 650 683 780

Further ratings for IEC only:

Rated voltage [VAC]

690 800

Over-voltage [VAC]8 hours daily 759 880

30 min. daily 793.5 920

5 min. daily 828 960

1 min. daily 897 1040

ApplicationFRAKO capacitors are recommended for use in fixe or automatic power factor correction systems as well as harmonic filters. FRAKO holds system registration certificates for ISO 9001 (quality system), ISO 14001 (environmental management system) and ISO 50001 (energy management system).

Mechanical ConstructionCylindrical aluminum case with mounting stud M12 ×12, low loss self-healing dielectric made from segmented metallized polypropylene film. Filled with a dry type PCB-free, flame inhibiting, mineral filler with adhesive stabilizer and integrated mechanical overpressure disconnector. Discharge resistors are permanently connected at the capacitor terminals. Our patented fast connecting terminal, available as an option, minimizes wiring time, protects against direct contact with live terminals and meets the requirements of protection class IP20.

Patent No. 102005045978

Self-healing segmented capacitor fil

The principle of the overpressure disconnector


4

DesignFRAKO specializes in the production of three phase capacitors which are available in a wide variety of ratings to meet various international requirements. Our additional offerings include single phase capacitors and medium voltage capacitors. Please contact our company for more information.

Ratings■ UL/CSA: 0.9 - 30 kvar (60 Hz); 208 - 600 VAC■ IEC: 0.9 - 30.9 kvar (60 Hz); 208 - 800 VAC

■ UL/CSA: 0.7 - 25 kvar (50 Hz); 208 -600 VAC■ IEC: 0.7 - 25.7 kvar (50 Hz); 208 -800 VACOther ratings upon request.Maximum Fault Current: 10,000 amps

Capacitance Tolerance- 5% / + 5% (Available to - 1% / + 1%)

Power LossLess than 0.5 W / kvar when measured at the connecting terminal (including discharge resistor). About 0.2 W/ kvar dielectric losses.

Ambient Temperature■ UL/IEC: - 40 °C up to + 68 °C

(- 40 °F up to + 154 °F)

■ CSA: - 40 °C up to + 46 °C (- 40 °F up to + 114.8 °F)


Discharging after DisconnectionIn accordance with the National Electrical Code (NFPA 70, Article 460), Canadian Electrical Code (C22.2 No. 190-M1985) and IEC 60831, all FRAKO capacitors have integrated discharge resistors that guarantee terminal voltage will discharge to 50 V or less within one minute after the capacitor is disconnected from the power source.

Accessories: Fast Connecting Terminal for FRAKO Power Factor Correction Capacitors

All FRAKO capacitors are available with an optional fast connecting terminal. This maintenance free, patented terminal saves wiring time and assures secure connection of capacitor wiring and maintains permanent connection for the duration of the capacitor life.

Article-No. Description Type

31-08005 Plug-in type fast connecting terminal for capacitors with ∅ 85 mm, 3-phase

AKD 30/3

31-08004 Plug-in type fast connecting terminal for capacitors with ∅ 85 mm, single phase

AKD 30/1

Plug-in type fast connecting terminal for capacitors with ∅85 mmType: AKD 30/3Article-No.: 31-08005

5


h16

17.0

h16

35.0

M12M12M12

Capacitors with d = 85 mm (3.35 in) diameterfor connection with flat cable plu 9.5 × 1.2 mm (0.38 × 0.05 in)

Capacitors with d = 85 mm (3.35 in) diameterFast connecting terminal AKD 30/3 6 AWG 16 mm2 (0.0248 in2)

Dimensions

Height (h) varies by capacitor rating (see page 8-15 for h dimensions)

6

Technical Data

Technical Data Basic Capacitor Standard Capacitor Premium Capacitor Heavy Duty Capacitor

operated with DL-specificatio

operated with DP-specification*

Type LKT…-DB60 LKT…-DP60 LKT…-DL60 LKT…-DL60 LKT…-HD60Rated reactive power

1.8…30 kvar (60 Hz)1.5…25 kvar (50 Hz)

0.9…30 kvar (60 Hz)0.7…25 kvar (50 Hz)

1.8…25 kvar (60 Hz)1.5…20.8 kvar (50 Hz)

1.8…29.9 kvar (60 Hz) 2) 1.5…24.9 kvar (50 Hz) 2)

3.2…21.6 kvar (60 Hz)2.7…18 kvar (50 Hz)

Rated voltage 208…525 V UL ratings: 208…600 V IEC ratings: 208…800 V

208…525 V UL ratings: 208…600 V IEC ratings: 208…615 V

208…525 V

Rated frequency 60 / 50 Hz power frequency suitable for use in harmonic and PWM voltage filter

60 / 50 Hz power frequency suitable for use in harmonic and PWM voltage filter


60 / 50 Hz power frequency suitable for use in harmonic and PWM voltage filters


Maximum overcurrent capability (at rated voltage)

1.25 × lN (60 Hz)1.5 × lN (50 Hz)

1.5 × lN (60 Hz)1.8 × lN (50 Hz)

1.8 × lN (60 Hz)2.2 × lN (50 Hz)

1.65 × lN (60 Hz)2.0 × lN (50 Hz)

2.25 × lN (60 Hz)2.7 × lN (50 Hz)

Maximum inrush current capability (at rated voltage)

167 × lN (60 Hz)200 × lN (50 Hz)

208 × lN (60 Hz)250 × lN (50 Hz)

250 × lN (60 Hz)300 × lN (50 Hz)

250 × lN (60 Hz)300 × lN (50 Hz)

375 × lN (60 Hz)450 × lN (50 Hz)

Ambient temperature 1)

-25 ºC up to class D (-13 ºF up to class D)

-40 ºC up to +60 ºC (-40 ºF up to +140 ºF)




Maximum case temperature

70 ºC (158 ºF) 75 ºC (167 ºF) 75 ºC (167 ºF) 75 ºC (167 ºF) 75 ºC (167 ºF)

Dielectric power loss

0.2 W/kvar 0.2 W/kvar 0.2 W/kvar 0.2 W/kvar 0.2 W/kvar

Power loss including discharge resistors

≤ 0.5 W/kvar ≤ 0.5 W/kvar ≤ 0.5 W/kvar ≤ 0.5 W/kvar ≤ 0.5 W/kvar

Test voltage (terminal - terminal)

2.15 × UN for 2 s1.85 × UN for 18 s

2.15 × UN for 2 s1.85 × UN for 18 s

2.15 × UN for 2 s1.85 × UN for 18 s

2.15 × UN for 2 s1.85 × UN for 18 s

2.15 × UN for 2 s1.85 × UN for 18 s

Test voltage (terminal - case)

3,900 V, 2 s 3,900 V, 2 s 3,900 V, 2 s 3,900 V, 2 s 3,900 V, 2 s

Mean life expectancy

100,000 h. 130,000 h. 170,000 h. 130,000 h. 200,000 h.

Maximum humidity

95% relative humidity 95% relative humidity 95% relative humidity 95% relative humidity 95% relative humidity

Maximum altitude 4,000 m (13,124 ft) 4,000 m (13,124 ft) 4,000 m (13,124 ft) 4,000 m (13,124 ft) 4,000 m (13,124 ft)Number of annual switching operations

20,000 40,000 60,000 60,000 100,000

Discharging level in 60 s

≤ 50 V ≤ 50 V ≤ 50 V ≤ 50 V ≤ 50 V

1) CSA compliance up to +46 ºC (114.8 ºF) maximumGenerally, DL-type capacitors can also be operated at higher voltages with the DP-type specificationPlease note that the DP values in the chart are marked with *2) IEC ratings up to 30.9 kvar (60 Hz) / 25.7 kvar (50 Hz)

7

Technical Data Basic Capacitor Standard Capacitor Premium Capacitor Heavy Duty Capacitor

Tightening torque for aluminium mounting screw (approx.)

15 Nm (133 in-lbs) 15 Nm (133 in-lbs) 15 Nm (133 in-lbs) 15 Nm (133 in-lbs) 15 Nm (133 in-lbs)

Recommended for Networks with low harmonic content and normal ambient temperature

Networks with higher harmonic levels and/or high ambient temperature

Demanding networks (i.e. networks with very high harmonic levels and/or very high ambient temperature)

Networks with higher harmonic levels and/or high ambient temperature

Extreme demanding network- and ambient conditions

1) CSA compliance up to +46 ºC (114.8 ºF) maximumGenerally, DL-type capacitors can also be operated at higher voltages with the DP-type specificationPlease note that the DP values in the chart are marked with *2) IEC ratings up to 30.9 kvar (60 Hz) / 25.7 kvar (50 Hz)

Temperature class admissible ambient temperature

maximum mean over 24 h highest mean over 1 year

D 55ºC (131 ºF) 45ºC (113 ºF) 35ºC (95 ºF)

10

Standard Capacitors (three-phase)CapacitorType

Diam. × height

Capacitance Article-No.

Rated Reactive Power in kvar at Rated Voltage 60Hz

LKT ... mm µF

208

V

230

V

240

V

300

V

400

V

415

V

440

V

460

V

480

V

525

V

570

V

600

V

10-240-DP60 85 × 163 3 × 153.5 31-10629 7.5 9.2 10.0

12.5-240-DP60 85 × 215 3 × 191.9 31-10630 9.4 11.5 12.5

20-240-DP60 85 × 278 3 × 307.0 31-10631 15.0 18.4 20.0

15-300-DP60 85 × 163 3 × 147.4 31-10632 7.2 8.8 9.6 15.0

18-300-DP60 85 × 215 3 × 176.8 31-10633 8.7 10.6 11.5 18.0

12-400-DP60 85 × 163 3 × 66.3 31-10652 3.2 4.0 4.3 6.8 12.0

15-400-DP60 85 × 215 3 × 82.9 31-10653 4.1 5.0 5.4 8.4 15.0

24-400-DP60 85 × 278 3 × 132.6 31-10654 6.5 7.9 8.6 13.5 24.0

30-400-DP60 85 × 278 3 × 165.8 31-10655 8.1 9.9 10.8 16.9 30.0

12-440-DP60 85 × 163 3 × 54.8 31-10656 2.7 3.3 3.6 5.6 9.9 10.7 12.0

15-440-DP60 85 × 215 3 × 68.5 31-10657 3.4 4.1 4.5 7.0 12.4 13.3 15.0

24-440-DP60 85 × 278 3 × 109.6 31-10658 5.4 6.6 7.1 11.2 19.8 21.4 24.0

30-440-DP60 85 × 278 3 × 137.0 31-10659 6.7 8.2 8.9 13.9 24.8 26.7 30.0

10-480-DP60 85 × 163 3 × 38.4 31-10634 1.9 2.3 2.5 3.9 6.9 7.5 8.4 9.2 10.0

12.5-480-DP60 85 × 163 3 × 48 31-10635 2.3 2.9 3.1 4.9 8.7 9.3 10.5 11.5 12.5

20-480-DP60 85 × 215 3 × 76.8 31-10636 3.8 4.6 5.0 7.8 13.9 15.0 16.8 18.4 20.0

25-480-DP60 85 × 278 3 × 95.9 31-10637 4.7 5.7 6.3 9.8 17.4 18.7 21.0 23.0 25.0

11.25-525-DP60 85 × 163 3 × 36.1 31-10638 1.8 2.2 2.4 3.7 6.5 7.0 7.9 8.6 9.4 11.25

14-525-DP60 85 × 215 3 × 44.9 31-10639 2.2 2.7 2.9 4.6 8.1 8.8 9.8 10.7 11.7 14.0

22.5-525-DP60 85 × 278 3 × 72.2 31-10640 3.5 4.3 4.7 7.3 13.1 14.1 15.8 17.3 18.8 22.5

28-525-DP60 85 × 278 3 × 89.8 31-10641 4.4 5.4 5.9 9.1 16.3 17.5 19.7 21.5 23.4 28.0

10-600-DP60 85 × 215 3 × 24.6 31-10642 1.2 1.5 1.6 2.5 4.4 4.8 5.4 5.9 6.4 7.7 9.0 10.0

12.5-600-DP60 85 × 215 3 × 30.7 31-10643 1.5 1.8 2.0 3.1 5.6 6.0 6.7 7.3 8.0 9.6 11.3 12.5

20-600-DP60 85 × 278 3 × 49.1 31-10644 2.4 2.9 3.2 5.0 8.9 9.6 10.8 11.8 12.8 15.3 18.1 20.0

25-600-DP60 85 × 320 3 × 61.4 31-10645 3.0 3.7 4.0 6.3 11.1 12.0 13.4 14.7 16.0 19.1 22.6 25.0

12.5-690-DP60 85 × 215 3 × 23.2 31-10646 1.1 1.4 1.5 2.4 4.2 4.5 5.1 5.6 6.0 7.2 8.5 9.5

15-690-DP60 85 × 215 3 × 27.9 31-10647 1.4 1.7 1.8 2.8 5.0 5.4 6.1 6.7 7.3 8.7 10.2 11.3

20-690-DP60 85 × 215 3 × 37.1 31-10648 1.8 2.2 2.4 3.8 6.7 7.2 8.1 8.9 9.7 11.6 13.7 15.1

25-690-DP60 85 × 278 3 × 46.4 31-10649 2.3 2.8 3.0 4.7 8.4 9.0 10.2 11.1 12.1 14.5 17.1 18.9

30-690-DP60 85 × 320 3 × 55.7 31-10650 2.7 3.3 3.6 5.7 10.1 10.9 12.2 13.3 14.5 17.4 20.5 22.7

12.6-800-DP60 85 × 215 3 × 17.4 31-10661 0.9 1.0 1.1 1.8 3.2 3.4 3.8 4.2 4.5 5.4 6.4 7.1

16-800-DP60 85 × 215 3 × 22.1 31-10662 1.1 1.3 1.4 2.3 4.0 4.3 4.8 5.3 5.8 6.9 8.1 9.0

25.2-800-DP60 85 × 278 3 × 34.8 31-10663 1.7 2.1 2.3 3.5 6.3 6.8 7.6 8.3 9.1 10.9 12.8 14.2

Power Factor Correction Capacitors (three-phase)Type LKT…-DP60 for 60 Hz

11

Power Factor Correction Capacitors (three-phase)Type LKT…-DP60 for 50 Hz

Standard Capacitors (three-phase)CapacitorType

Diam. × height



LKT ... mm µF

208

V

230

V

240

V

300

V

400

V

415

V

440

V

460

V

480

V

525

V

570

V

600

V

10-240-DP60 85 × 163 3 × 153.5 31-10629 6.3 7.7 8.33

12.5-240-DP60 85 × 215 3 × 191.9 31-10630 7.8 9.6 10.4

20-240-DP60 85 × 278 3 × 307.0 31-10631 12.5 15.3 16.7

15-300-DP60 85 × 163 3 × 147.4 31-10632 6.0 7.4 8.0 12.5

18-300-DP60 85 × 215 3 × 176.8 31-10633 7.2 8.8 9.6 15.0

12-400-DP60 85 × 163 3 × 66.3 31-10652 2.7 3.3 3.6 5.6 10.0

15-400-DP60 85 × 215 3 × 82.9 31-10653 3.4 4.1 4.5 7.0 12.5

24-400-DP60 85 × 278 3 × 132.6 31-10654 5.4 6.6 7.2 11.3 20.0

30-400-DP60 85 × 278 3 × 165.8 31-10655 6.8 8.3 9.0 14.1 25.0

12-440-DP60 85 × 163 3 × 54.8 31-10656 2.2 2.7 3.0 4.6 8.3 8.9 10.0

15-440-DP60 85 × 215 3 × 68.5 31-10657 2.8 3.4 3.7 5.8 10.3 11.1 12.5

24-440-DP60 85 × 278 3 × 109.6 31-10658 4.5 5.5 6.0 9.3 16.5 17.8 20.0

30-440-DP60 85 × 278 3 × 137.0 31-10659 5.6 6.8 7.4 11.6 20.7 22.2 25.0

10-480-DP60 85 × 163 3 × 38.4 31-10634 1.6 1.9 2.1 3.2 5.8 6.2 7.0 7.7 8.3

12.5-480-DP60 85 × 163 3 × 48 31-10635 2.0 2.4 2.6 4.1 7.2 7.8 8.8 9.6 10.4

20-480-DP60 85 × 215 3 × 76.8 31-10636 3.1 3.8 4.2 6.5 11.6 12.5 14.0 15.3 16.7

25-480-DP60 85 × 278 3 × 95.9 31-10637 3.9 4.8 5.2 8.1 14.5 15.6 17.5 19.1 20.8

11.25-525-DP60 85 × 163 3 × 36.1 31-10638 1.5 1.8 2.0 3.1 5.4 5.9 6.6 7.2 7.8 9.4

14-525-DP60 85 × 215 3 × 44.9 31-10639 1.8 2.2 2.4 3.8 6.8 7.3 8.2 9.0 9.8 11.7

22.5-525-DP60 85 × 278 3 × 72.2 31-10640 3.0 3.6 3.9 6.1 10.9 11.7 13.2 14.4 15.7 18.8

28-525-DP60 85 × 278 3 × 89.8 31-10641 3.7 4.5 4.9 7.6 13.5 14.6 16.4 17.9 19.5 23.3

10-600-DP60 85 × 215 3 × 24.6 31-10642 1.0 1.2 1.3 2.1 3.7 4.0 4.5 4.9 5.3 6.4 7.5 8.3

12.5-600-DP60 85 × 215 3 × 30.7 31-10643 1.2 1.5 1.7 2.6 4.6 5.0 5.6 6.1 6.7 8.0 9.4 10.4

20-600-DP60 85 × 278 3 × 49.1 31-10644 2.0 2.5 2.7 4.2 7.4 8.0 9.0 9.8 10.7 12.8 15.0 16.7

25-600-DP60 85 × 320 3 × 61.4 31-10645 2.5 3.1 3.3 5.2 9.2 10.0 11.2 12.2 13.3 16.0 18.8 20.8

12.5-690-DP60 85 × 215 3 × 23.2 31-10646 0.9 1.2 1.3 2.0 3.5 3.8 4.2 4.6 5.0 6.0 7.1 7.9

15-690-DP60 85 × 215 3 × 27.9 31-10647 1.1 1.4 1.5 2.4 4.2 4.5 5.1 5.6 6.0 7.2 8.5 9.5

20-690-DP60 85 × 215 3 × 37.1 31-10648 1.5 1.9 2.0 3.2 5.6 6.0 6.8 7.4 8.1 9.7 11.4 12.6

25-690-DP60 85 × 278 3 × 46.4 31-10649 1.9 2.3 2.5 3.9 7.0 7.5 8.5 9.2 10.1 12.1 14.2 15.8

30-690-DP60 85 × 320 3 × 55.7 31-10650 2.3 2.8 3.0 4.7 8.4 9.0 10.2 11.1 12.1 14.5 17.1 18.9

12.6-800-DP60 85 × 215 3 × 17.4 31-10661 0.7 0.9 0.9 1.5 2.6 2.8 3.2 3.5 3.8 4.5 5.3 5.9

16-800-DP60 85 × 215 3 × 22.1 31-10662 0.9 1.1 1.2 1.9 3.3 3.6 4.0 4.4 4.8 5.7 6.8 7.5

25.2-800-DP60 85 × 278 3 × 34.8 31-10663 1.4 1.7 1.9 3.0 5.3 5.7 6.4 6.9 7.6 9.0 10.7 11.8

12

Standard Capacitors (three-phase) - IEC ratings onlyCapacitorType

Diam. × height



LKT ... mm µF208 V … 600 V

615

V

690

V

750

V

800

V

12.5-690-DP60 85 × 215 3 × 23.2 31-10646 9.9 12.5

15-690-DP60 85 × 215 3 × 27.9 31-10647 11.9 15.0

20-690-DP60 85 × 215 3 × 37.1 31-10648 15.9 20.0

25-690-DP60 85 × 278 3 × 46.4 31-10649 19.9 25.0

30-690-DP60 85 × 320 3 × 55.7 31-10650 23.8 30.0

12.6-800-DP60 85 × 215 3 × 17.4 31-10661 7.5 9.4 11.1 12.6

16-800-DP60 85 × 215 3 × 22.1 31-10662 9.5 11.9 14.1 16.0

25.2-800-DP60 85 × 278 3 × 34.8 31-10663 14.9 18.8 22.2 25.2

Standard Capacitors (three-phase) - IEC ratings onlyCapacitorType

Diam. × height



LKT ... mm µF208 V … 600 V

615

V

690

V

750

V

800

V

12.5-690-DP60 85 × 215 3 × 23.2 31-10646 8.3 10.4

15-690-DP60 85 × 215 3 × 27.9 31-10647 9.9 12.5

20-690-DP60 85 × 215 3 × 37.1 31-10648 13.2 16.7

25-690-DP60 85 × 278 3 × 46.4 31-10649 16.6 20.8

30-690-DP60 85 × 320 3 × 55.7 31-10650 19.9 25.0

12.6-800-DP60 85 × 215 3 × 17.4 31-10661 6.2 7.8 9.2 10.5

16-800-DP60 85 × 215 3 × 22.1 31-10662 7.9 9.9 11.7 13.3

25.2-800-DP60 85 × 278 3 × 34.8 31-10663 12.4 15.6 18.5 21.0

Power Factor Correction Capacitors (three-phase)Type LKT…-DP60 for 60 Hz and 50 Hz

See Table Standard Capacitors (three-phase)

- UL ratings

See Table Standard Capacitors (three-phase)

- UL ratings

13

Power Factor Correction Capacitors (single-phase)Type LKT…-EP for 60 Hz and 50 Hz

Standard Capacitors (single-phase) - IEC ratings onlyCapacitorType

Diam. × height



LKT ... mm µF

208

V

230

V

280

V

400

V

415

V

440

V

460

V

480

V

525

V

5-280-EP 60 × 138 1 × 203.7 31-10547 3.3 4.1 6.0

10-280-EP 85 × 131 1 × 407.4 31-10548 6.6 8.1 12.0

3.33-440-EP 60 × 90 1 × 54.8 31-10526 0.9 1.1 1.6 3.3 3.6 4.0

4.17-440-EP 60 × 138 1 × 68.6 31-10527 1.1 1.4 2.0 4.1 4.5 5.0

5-440-EP 60 × 138 1 × 82.2 31-10528 1.3 1.6 2.4 5.0 5.33 6.0

9.4-440-EP 70 × 138 1 × 154.6 31-10511 2.5 3.1 4.6 9.3 10.0 11.3

2.4-480-EP 60 × 90 1 × 33.2 31-10529 0.5 0.7 1.0 2.0 2.15 2.4 2.7 2.9

3.33-480-EP 60 × 90 1 × 46.0 31-10530 0.8 0.9 1.4 2.8 3.0 3.4 3.7 4.0

3.6-480-EP 60 × 138 1 × 49.7 31-10531 0.8 1.0 1.5 3.0 3.2 3.6 3.9 4.3

4.8-480-EP 60 × 138 1 × 66.3 31-10515 1.1 1.3 2.0 4.0 4.3 4.8 5.3 5.8

6-480-EP 60 × 138 1 × 82.9 31-10514 1.4 1.66 2.5 5.0 5.4 6.0 6.6 7.2

2.8-525-EP 60 × 90 1 × 32.3 31-10532 0.5 0.7 1.0 1.9 2.1 2.4 2.6 2.8 3.4

3.33-525-EP 60 × 138 1 × 38.5 31-10533 0.6 0.8 1.1 2.3 2.5 2.8 3.1 3.3 4.0

8.33-525-EP 70 × 138 1 × 96.2 31-10518 1.6 1.9 2.8 5.8 6.3 7.0 7.7 8.33 10.0

Standard Capacitors (single-phase) - IEC ratings onlyCapacitorType

Diam. × height



LKT ... mm µF

208

V

230

V

280

V

400

V

415

V

440

V

460

V

480

V

525

V5-280-EP 60 × 138 1 × 203.7 31-10547 2.8 3.4 5.0

10-280-EP 85 × 131 1 × 407.4 31-10548 5.5 6.8 10.0

3.33-440-EP 60 × 90 1 × 54.8 31-10526 0.7 0.9 1.3 2.8 3.0 3.33

4.17-440-EP 60 × 138 1 × 68.6 31-10527 0.9 1.1 1.7 3.4 3.7 4.17

5-440-EP 60 × 138 1 × 82.2 31-10528 1.1 1.4 2.0 4.1 4.4 5.0

9.4-440-EP 70 × 138 1 × 154.6 31-10511 2.1 2.6 3.8 7.8 8.4 9.4

2.4-480-EP 60 × 90 1 × 33.2 31-10529 0.5 0.6 0.8 1.70 1.80 2.0 2.2 2.4

3.33-480-EP 60 × 90 1 × 46.0 31-10530 0.6 0.8 1.1 2.3 2.5 2.8 3.1 3.33

3.6-480-EP 60 × 138 1 × 49.7 31-10531 0.7 0.8 1.2 2.5 2.7 3.0 3.3 3.6

4.8-480-EP 60 × 138 1 × 66.3 31-10515 0.9 1.1 1.6 3.33 3.6 4.0 4.4 4.8

6-480-EP 60 × 138 1 × 82.9 31-10514 1.1 1.4 2.0 4.17 4.5 5.0 5.5 6.0

2.8-525-EP 60 × 90 1 × 32.3 31-10532 0.4 0.5 0.8 1.6 1.7 2.0 2.1 2.3 2.8

3.33-525-EP 60 × 138 1 × 38.5 31-10533 0.5 0.6 0.9 1.9 2.1 2.3 2.6 2.8 3.33

8.33-525-EP 70 × 138 1 × 96.2 31-10518 1.3 1.6 2.4 4.8 5.2 5.9 6.4 7.0 8.33

14

Premium Capacitors (three-phase) 3)

CapacitorType

Diam. × height



LKT ... mm µF

208

V

230

V

240

V

300

V

400

V

415

V

440

V

460

V

480

V

525

V

570

V

600

V

615

V

12-400-DL60 85 × 215 3 × 66.3 31-10680 3.2 4.0 4.3 6.8 12.0 12.9* 14.5*

15-400-DL60 85 × 215 3 × 82.9 31-10681 4.1 5.0 5.4 8.4 15.0 16.2* 18.2*

24-400-DL60 85 × 215 3 × 132.6 31-10682 6.5 7.9 8.6 13.5 24.0 25.8* 29.0*

12-440-DL60 85 × 163 3 × 54.8 31-10683 2.7 3.3 3.6 5.6 9.9 10.7 12.0 13.1* 14.3*

15-440-DL60 85 × 215 3 × 68.5 31-10684 3.4 4.1 4.5 7.0 12.4 13.3 15.0 16.4* 17.9*

24-440-DL60 85 × 278 3 × 109.6 31-10685 5.4 6.6 7.1 11.2 19.8 21.4 24.0 26.2* 28.6*

10-480-DL60 85 × 163 3 × 38.4 31-10686 1.9 2.3 2.5 3.9 6.9 7.5 8.4 9.2 10.0 12.0*

12.5-480-DL60 85 × 215 3 × 48.0 31-10687 2.3 2.9 3.1 4.9 8.7 9.3 10.5 11.5 12.5 15.0*

20-480-DL60 85 × 278 3 × 76.8 31-10688 3.8 4.6 5.0 7.8 13.9 15.0 16.8 18.4 20.0 23.9*

25-480-DL60 85 × 278 3 × 95.9 31-10689 4.7 5.7 6.3 9.8 17.4 18.7 21.0 23.0 25.0 29.9*

11.25-525-DL60 85 × 215 3 × 36.1 31-10690 1.8 2.2 2.4 3.7 6.5 7.0 7.9 8.6 9.4 11.25 13.3* 14.7 15.4*

14-525-DL60 85 × 215 3 × 44.9 31-10691 2.2 2.7 2.9 4.6 8.1 8.7 9.8 10.8 11.7 14.0 16.5* 18.3 19.2*

22.5-525-DL60 85 × 320 3 × 72.2 31-10692 3.5 4.3 4.7 7.3 13.1 14.1 15.8 17.3 18.8 22.5 26.5* 29.4 30.9*3) UL and IEC ratings up to 600 V; 615 V IEC onlyGenerally, DL-type capacitors can also be operated at higher voltages with the DP-type specification. Please note that the D values in the chart are marked with *

Premium Capacitors (three-phase) 3)

CapacitorType

Diam. × height



LKT ... mm µF

208

V

230

V

240

V

300

V

400

V

415

V

440

V

460

V

480

V

525

V

570

V

600

V

615

V12-400-DL60 85 × 215 3 × 66.3 31-10680 2.7 3.3 3.6 5.6 10.0 10.8* 12.1*

15-400-DL60 85 × 215 3 × 82.9 31-10681 3.4 4.1 4.5 7.0 12.5 13.5* 15.1*

24-400-DL60 85 × 215 3 × 132.6 31-10682 5.4 6.6 7.2 11.3 20.0 21.5* 24.2*

12-440-DL60 85 × 163 3 × 54.8 31-10683 2.2 2.7 3.0 4.6 8.3 8.9 10.0 10.9* 11.9*

15-440-DL60 85 × 215 3 × 68.5 31-10684 2.8 3.4 3.7 5.8 10.3 11.1 12.5 13.7* 14.9*

24-440-DL60 85 × 278 3 × 109.6 31-10685 4.5 5.5 6.0 9.3 16.5 17.8 20.0 21.9* 23.8*

10-480-DL60 85 × 163 3 × 38.4 31-10686 1.6 1.9 2.1 3.2 5.8 6.2 7.0 7.7 8.3 10.0*

12.5-480-DL60 85 × 215 3 × 48.0 31-10687 2.0 2.4 2.6 4.1 7.2 7.8 8.8 9.6 10.4 12.5*

20-480-DL60 85 × 278 3 × 76.8 31-10688 3.1 3.8 4.2 6.5 11.6 12.5 14.0 15.3 16.7 19.9*

25-480-DL60 85 × 278 3 × 95.9 31-10689 3.9 4.8 5.2 8.1 14.5 15.6 17.5 19.1 20.8 24.9*

11.25-525-DL60 85 × 215 3 × 36.1 31-10690 1.5 1.8 2.0 3.1 5.5 5.9 6.6 7.2 7.8 9.4 11.1* 12.3 12.9*

14-525-DL60 85 × 215 3 × 44.9 31-10691 1.8 2.2 2.4 3.8 6.8 7.3 8.2 9.0 9.8 11.7 13.8* 15.3 16.0*

22.5-525-DL60 85 × 320 3 × 72.2 31-10692 3.0 3.6 3.9 6.1 10.9 11.7 13.2 14.4 15.7 18.8 22.1* 24.6 25.7*3) UL and IEC ratings up to 600 V; 615 V IEC onlyGenerally, DL-type capacitors can also be operated at higher voltages with the DP-type specification. Please note that the D values in the chart are marked with *

Power Factor Correction Capacitors (three-phase)Type LKT…-DL60 for 60 Hz and 50 Hz

15

Heavy Duty Capacitors (three-phase)CapacitorType

Diam. × height



LKT ... mm µF

208

V

230

V

240

V

300

V

400

V

415

V

440

V

460

V

480

V

500

V

525

V

20.1-480-HD60 85 × 215 3 × 77.1 31-10693 3.8 4.6 5.0 7.9 14.0 15.0 16.9 18.5 20.1

21.6-480-HD60 85 × 215 3 × 82.9 31-10694 4.1 5.0 5.4 8.4 15.0 16.2 18.2 19.8 21.6

18.7-500-HD60 85 × 215 3 × 66.1 31-10695 3.2 4.0 4.3 6.7 12.0 12.9 14.5 15.8 17.2 18.7

19.3-500-HD60 85 × 215 3 × 68.3 31-10696 3.3 4.1 4.4 6.9 12.4 13.3 15.0 16.3 17.8 19.3

20.2-500-HD60 85 × 215 3 × 71.4 31-10697 3.5 4.3 4.7 7.3 12.9 13.9 15.6 17.1 18.6 20.2

21.6-525-HD60 85 × 215 3 × 69.3 31-10698 3.4 4.1 4.5 7.1 12.5 13.5 15.2 16.6 18.1 19.6 21.6

Heavy Duty Capacitors (three-phase)CapacitorType

Diam. × height



LKT ... mm µF

208

V

230

V

240

V

300

V

400

V

415

V

440

V

460

V

480

V

500

V

525

V

20.1-480-HD60 85 × 215 3 × 77.1 31-10693 3.2 3.9 4.2 6.6 11.6 12.5 14.1 15.4 16.8

21.6-480-HD60 85 × 215 3 × 82.9 31-10694 3.4 4.1 4.5 7.0 12.5 13.5 15.1 16.5 18.0

18.7-500-HD60 85 × 215 3 × 66.1 31-10695 2.7 3.3 3.6 5.6 10.0 10.7 12.1 13.2 14.4 15.6

19.3-500-HD60 85 × 215 3 × 68.3 31-10696 2.8 3.4 3.7 5.8 10.3 11.1 12.5 13.6 14.8 16.1

20.2-500-HD60 85 × 215 3 × 71.4 31-10697 2.9 3.6 3.9 6.0 10.7 11.6 13.0 14.3 15.5 16.8

21.6-525-HD60 85 × 215 3 × 69.3 31-10698 2.8 3.5 3.8 5.9 10.5 11.3 12.6 13.8 15.1 16.3 18.0

Power Factor Correction Capacitors (three-phase)Type LKT…-HD60 for 60 Hz and 50 Hz

RatedVoltage

RatedKVAR uF

uF wyeequivalentper phase

TypeMax.Amps

(continuous)Article No. No

Reactorwith 7% reactor

No Reactor

with 7% reactor

No Reactor

with 7% reactor

No Reactor

with 7% reactor

No Reactor

with 7% reactor

No Reactor

with 7% reactor

1 3x 15.4 46.2 LKT 1-240-DP60 3.6 31-10800 0.75 0.81 1.001.5 3x 23.0 69.0 LKT 1.5-240-DP60 5.4 31-10801 1.13 1.21 1.502 3x 30.7 92.1 LKT 2-240-DP60 7.2 31-10802 1.50 1.61 2.00

2.5 3x 38.4 115.2 LKT 2.5-240-DP60 9 31-10803 1.88 2.02 2.503 3x 46.1 138.3 LKT 3-240-DP60 10.8 31-10804 2.25 2.42 3.004 3x 61.4 184.2 LKT 4-240-DP60 14.4 31-10805 3.00 3.23 4.005 3x 76.8 230.4 LKT 5-240-DP60 18 31-10806 3.76 4.04 5.006 3x 92.1 276.3 LKT 6-240-DP60 21.7 31-10807 4.51 4.84 6.00

7.5 3x 115.1 345.3 LKT 7.5-240-DP60 27.1 31-10808 5.63 6.06 7.5010 3x 153.5 460.5 LKT 10-240-DP60 36.1 31-10629 7.51 8.07 10.00

12.5 3x 191.9 575.7 LKT 12.5-240-DP60 45.1 31-10630 9.39 10.09 12.5015 3x 230.3 690.9 LKT 15-240-DP60 54.1 31-10809 11.27 12.11 15.00

17.5 3x 268.6 805.8 LKT 17.5-240-DP60 63.2 31-10810 13.14 14.13 17.5020 3x 307.0 921.0 LKT 20-240-DP60 72.2 31-10631 15.02 16.15 20.00

15 3x 147.4 442.2 LKT 15-300-DP60 43.3 31-10632 7.21 7.75 9.60 10.3218 3x 176.8 530.4 LKT 18-300-DP60 52 31-10633 8.65 9.30 11.52 12.38

12 3x 66.3 198.9 LKT 12-400-DP60 26 31-10652 3.24 3.49 4.32 4.64 10.8315 3x 82.9 248.7 LKT 15-400-DP60 32.5 31-10653 4.06 4.36 5.40 5.81 13.5424 3x 132.6 397.8 LKT 24-400-DP60 52 31-10654 6.49 6.98 8.64 9.29 21.6630 3x 165.8 497.4 LKT 30-400-DP60 65 31-10655 8.11 8.72 10.80 11.61 27.08

12 3x 54.8 164.4 LKT 12-440-DP60 23.6 31-10656 2.68 2.88 3.57 3.84 8.95 9.62 12.0015 3x 68.5 205.5 LKT 15-440-DP60 29.5 31-10657 3.35 3.60 4.46 4.80 11.19 12.03 15.0024 3x 109.6 328.8 LKT 24-440-DP60 47.2 31-10658 5.36 5.77 7.14 7.68 17.90 19.24 24.0030 3x 137.0 411.0 LKT 30-440-DP60 59.1 31-10659 6.70 7.21 8.93 9.60 22.38 24.05 30.00

1 3x 3.8 11.4 LKT 1-480-DP60 1.8 31-10811 0.19 0.20 0.25 0.27 0.63 0.67 0.84 0.90 1.001.5 3x 5.8 17.4 LKT 1.5-480-DP60 2.7 31-10812 0.28 0.30 0.38 0.40 0.94 1.01 1.26 1.35 1.502 3x 7.7 23.1 LKT 2-480-DP60 3.6 31-10813 0.38 0.40 0.50 0.54 1.25 1.35 1.68 1.81 2.00

2.5 3x 9.6 28.8 LKT 2.5-480-DP60 4.5 31-10814 0.47 0.50 0.63 0.67 1.57 1.68 2.10 2.26 2.503 3x 11.5 34.5 LKT 3-480-DP60 5.4 31-10815 0.56 0.61 0.75 0.81 1.88 2.02 2.52 2.71 3.004 3x 15.4 46.2 LKT 4-480-DP60 7.2 31-10816 0.75 0.81 1.00 1.08 2.51 2.69 3.36 3.61 4.005 3x 19.2 57.6 LKT 5-480-DP60 9 31-10817 0.94 1.01 1.25 1.34 3.13 3.37 4.20 4.52 5.006 3x 23.0 69.0 LKT 6-480-DP60 10.8 31-10818 1.13 1.21 1.50 1.61 3.76 4.04 5.04 5.42 6.00

7.5 3x 28.8 86.4 LKT 7.5-480-DP59 13.5 31-10819 1.41 1.51 1.88 2.02 4.70 5.05 6.30 6.77 7.5010 3x38.4 115.2 LKT 10-480-DP60 18 31-10634 1.88 2.02 2.50 2.69 6.27 6.74 8.40 9.03 10.00

12.5 3x 48.0 144.0 LKT 12.5-480-DP60 22.6 31-10635 2.35 2.52 3.13 3.36 7.83 8.42 10.50 11.29 12.5015 3x 57.6 172.8 LKT 15-480-DP60 27.1 31-10820 2.82 3.03 3.75 4.03 9.40 10.11 12.60 13.55 15.00

17.5 3x 67.2 201.6 LKT 17.5-480-DP60 31.6 31-10821 3.29 3.53 4.38 4.70 10.97 11.79 14.70 15.81 17.5020 3x 76.8 230.4 LKT 20-480-DP60 36.1 31-10636 3.76 4.04 5.00 5.38 12.53 13.47 16.81 18.07 20.00

22.5 3x 86.3 258.9 LKT 22.5-480-DP60 40.6 31-10822 4.23 4.54 5.63 6.05 14.10 15.16 18.91 20.32 22.5025 3x 95.9 287.7 LKT 25-480-DP60 45.1 31-10637 4.69 5.05 6.25 6.72 15.67 16.84 21.01 22.58 25.00

11.25 3x 36.1 108.3 LKT 11.25-525-DP60 18.6 31-10638 1.77 1.90 2.35 2.53 5.89 6.34 7.90 8.49 9.40 10.1114 3x 44.9 134.7 LKT 14-525-DP60 23.1 31-10639 2.20 2.36 2.93 3.15 7.33 7.88 9.83 10.57 11.70 12.58

22.5 3x 72.2 216.6 LKT 22.5-525-DP60 37.1 31-10640 3.53 3.80 4.70 5.05 11.79 12.67 15.80 16.99 18.81 20.2228 3x 89.8 269.7 LKT 28-525-DP60 46.2 31-10641 4.40 4.72 5.85 6.29 14.67 15.77 19.67 21.14 23.41 25.16

1 3x 2.5 7.5 LKT 1-600-DP60 1.4 31-10823 0.12 0.13 0.16 0.17 0.40 0.43 0.54 0.58 0.64 0.69 1.001.5 3x 3.7 11.1 LKT 1.5-600-DP60 2.2 31-10824 0.18 0.19 0.24 0.26 0.60 0.65 0.81 0.87 0.96 1.03 1.502 3x 4.9 14.7 LKT 2-600-DP60 2.9 31-10825 0.24 0.26 0.32 0.34 0.80 0.86 1.08 1.16 1.28 1.38 2.00

2.5 3x 6.1 18.3 LKT 2.5-600-DP60 3.6 31-10826 0.30 0.32 0.40 0.43 1.00 1.08 1.34 1.45 1.60 1.72 2.503 3x 7.4 22.2 LKT 3-600-DP60 4.3 31-10827 0.36 0.39 0.48 0.52 1.20 1.29 1.61 1.73 1.92 2.06 3.004 3x 9.8 29.4 LKT 4-600-DP60 5.8 31-10828 0.48 0.52 0.64 0.69 1.60 1.72 2.15 2.31 2.56 2.75 4.005 3x 12.3 36.9 LKT 5-600-DP60 7.2 31-10829 0.60 0.65 0.80 0.86 2.01 2.16 2.69 2.89 3.20 3.44 5.006 3x 14.7 44.1 LKT 6-600-DP60 8.7 31-10830 0.72 0.78 0.96 1.03 2.41 2.59 3.23 3.47 3.84 4.13 6.00

7.5 3x 18.4 55.2 LKT 7.5-600-DP60 10.8 31-10831 0.90 0.97 1.20 1.29 3.01 3.23 4.03 4.34 4.80 5.16 7.5010 3x 24.6 73.8 LKT 10-600-DP60 14.4 31-10642 1.20 1.29 1.60 1.72 4.01 4.31 5.38 5.78 6.40 6.88 10.00

12.5 3x 30.7 92.1 LKT 12.5-600-DP60 18 31-10643 1.50 1.61 2.00 2.15 5.01 5.39 6.72 7.23 8.00 8.60 12.5015 3x 36.8 110.4 LKT 15-600-DP60 21.7 31-10832 1.80 1.94 2.40 2.58 6.02 6.47 8.07 8.67 9.60 10.32 15.00

17.5 3x 43.0 129.0 LKT 17.5-600-DP60 25.3 31-10833 2.10 2.26 2.80 3.01 7.02 7.55 9.41 10.12 11.20 12.04 17.5020 3x 49.1 147.3 LKT 20-600-DP60 28.9 31-10644 2.40 2.58 3.20 3.44 8.02 8.62 10.76 11.56 12.80 13.76 20.00

22.5 3x 55.3 165.9 LKT 22.5-600-DP60 32.5 31-10834 2.70 2.91 3.60 3.87 9.03 9.70 12.10 13.01 14.40 15.48 22.5025 3x 61.4 183.3 LKT 25-600-DP60 36.1 31-10645 3.00 3.23 4.00 4.30 10.03 10.78 13.44 14.45 16.00 17.20 25.00

12.5 3x 23.2 69.6 LKT 12.5-690-DP60 15.7 31-10646 1.14 1.22 1.51 1.63 3.79 4.08 5.08 5.46 6.05 6.50 9.45 10.1615 3x 27.9 83.7 LKT 15-690-DP60 18.8 31-10647 1.36 1.47 1.81 1.95 4.55 4.89 6.10 6.56 7.26 7.80 11.34 12.1920 3x 37.1 111.3 LKT 20-690-DP60 25.1 31-10648 1.82 1.95 2.42 2.60 6.07 6.52 8.13 8.74 9.68 10.40 15.12 16.2625 3x 46.4 139.2 LKT 25-690-DP60 31.4 31-10649 2.27 2.44 3.02 3.25 7.58 8.15 10.17 10.93 12.10 13.01 18.90 20.3230 3x 55.7 167.1 LKT 30-690-DP60 37.7 31-10650 2.73 2.93 3.63 3.90 9.10 9.78 12.20 13.11 14.52 15.61 22.68 24.39

12.6 3x 17.4 52.2 LKT 12.6-800-DP60 13.6 31-10661 0.85 0.92 1.13 1.22 2.84 3.06 3.81 4.10 4.54 4.88 7.09 7.6216 3x 22.1 66.3 LKT 16-800-DP60 17.3 31-10662 1.08 1.16 1.44 1.55 3.61 3.88 4.84 5.20 5.76 6.19 9.00 9.68

25.2 3x 234.8 104.4 LKT 25.2-800-DP60 27.3 31-10663 1.70 1.83 2.27 2.44 5.69 6.11 7.62 8.19 9.07 9.75 14.18 15.24800

kVAr at440V - 60Hz

kVAr at480V - 60Hz

kVAr at600V - 60Hz

240

300

400

Capacitor kVAr at208V - 60Hz

kVAr at240V - 60Hz

Supplemental Ratings for Type DP60 Capacitors

440

480

525

600

690

kVAr at380V - 60Hz

FRA

KO

95-

0032

1 / 0

7/12

/881

5

Sub

ject

to te

chni

cal c

hang

es


Transfab TMS 175, Jules-Léger Boucherville (QC) J4B 7K8 Canada

Fax: 450‐449‐9115

Phone: 1‐866‐540‐0412

[email protected] transfabtms.com

Power Factor Correction Capacitors Type LKT - Transfab … FRAKO Power Factor Correction Capacitors...

Documents

Transcript of Power Factor Correction Capacitors Type LKT - Transfab … FRAKO Power Factor Correction Capacitors...