Power Capacitor Listing

DC Link Capacitors

Type IFP Features: Diameters 75, 85, 100, 116 and 136mm Height Range: 87 -350mm Low Inductance High RMS current Low ESR Voltage Range: 600V – 3000V Customizable Effective replacement for Electrolytic capacitors Segmented (fused) dielectrics available

Type TGC Features: Compact Easy Mounting tabs Low Inductance High RMS current Low ESR Voltage Range: 600V – 3000V

Type MEC-DL Features: Segmented (fused) dielectric plates Designed for PCB mounting Low Inductance High RMS current Low ESR Voltage Range: 450-1300V

DC Link Capacitors – Custom Design

Type IBL Features: Customizable Very high RMS current 300-700Amps High bulk capacitance Very low ESR – typically less than 0.5mOhms

Type MIC Features: Customizable Very high RMS current 300-700Amps High bulk capacitance Widely accepted in Rail systems versus oil types Very low ESR High vibration resistance – Epoxy molded

Snubber Capacitors

Type 329 Features: Self Healing Hybrid Construction for very high peak currents Low Inductance Multiple Terminal Styles (Flat, Step, wide spacing)

Type HVSC Features: Self Healing Hybrid Construction for very high peak currents High Voltage Snubber – Up to 2500Vrms Configured for CGT, GTO systems High vibration resistance

AC Filter Capacitors

Type X382 Features: Diameters 75, 85, 100, 116 and 136mm Height Range: 87 -350mm UL Approved to 1000Vrms at 10,000 AFC Easily paralleled (up to 75A pass through current) Gel (dry) or oil filled versions Customizable

Type THD Features: Lower Cost Output AC Filter Capacitor (should not be used on input

filtering) Rack Bus bar Mounting Customizable

Type HC Features: Diameters 75, 85, 100, 116 and 136mm Height Range: 87 -350mm UL Approved to 620Vrms at 10,000AFC Higher individual current (up to 80A RMS) Gel (dry) or oil filled versions Customizable

AC Filter Capacitors – MediumVoltage

Type LV-6 Features: Available 10 to 500KVAR @ 6600V Long Life rating (20 years)

Technology and Development

Recent/ Ongoing Technology Upgrades

3 new R&D facilities at Shizuki Japan Facilities (Okyama, Akita and Kyushu) ASC AC life testing – 1200Vrms for 3 phase capacitors and 2400V for single phase capacitors 5000Vrms snubber capacitor testing (Medium Voltage Drives) Shizuki is a leader in metallized surfaces on film for high energy density Heavily involved in hybrid automotive market – developing market trends in film capability Between ASC and Shizuki over 150 years of capacitor manufacturing experience Widely diversified – Capacitors, Reactors, Power Equipment, Messaging, Flicker Suppression and Voltage Sag

equipment

V-Backup – up to 2000KVA 6600V

ReactorsCustom Display Systems