Powell Industrial Catalogue – Couplings Industrial, formerly known as Tony Powell Hose and...

Version 2

FIttIngS> Couplings

Powell Industrial, formerly known as Tony Powell Hose and Fittings, was established over thirty years ago and is now Australia’s largest family owned Industrial Hose, Fittings and Rubber products supplier.

Our businesses key focus is:• Industrial Trade customer base who requires supplier expertise in the

Industrial Hose, Fittings and Rubber market• Trained knowledgeable staff• Great team culture dedicated to genuine customer service• Best Service. Best Value. Best Advice.

This, our latest trade catalogue, has an increased range of trade relevant information, including our exclusive ‘Hose Management Program’, easy reference conversion and chemical compatibility charts and more products exclusive to Powell Industrial.

Since our last catalogue was produced, Powell Industrial has gone through a number of major changes. We’ve acquired two major Hose, Fittings and Rubber retailers, Fluid Handling Solution (FHS) and Purple Pig. These additions have built us into a nationwide operation, now totalling twelve branches around Australia. Together, these three companies and their long associated histories in the industrial goods market, encompass well over fifty years of experience. Each company has played a major role in shaping today’s Hose, Fittings and Rubber market and now all under the Powell Industrial banner offer Australia a strong and experienced brand for customers to engage with.

It’s also aided in us establishing a larger and more specialised product range, which is highlighted in this new catalogue. Many of your favourite and most trusted brands and their products, from all three companies, can now be purchased from under the one roof. Greater choice and value has never been this easy to obtain from one retailer.

I would like to take the opportunity to thank you for your past support and along with the team at Powell Industrial look forward to being of service to you now and long into the future.

Don McDonaldManaging Director

INtrOductION

Best Service. Best Value. Best Advice.

In focusing on our customer base, we’ve:Based on our in house intellectual property and know how, from more than thirty years in the Industrial Hose and Fittings and Rubber business, increased our range of trade dedicated products.

More convenient trade opening hours. Monday to Friday – check with your local branch.

Further developed our HMP (Hose Management Program) including our PRS (Powell Rapid Service) for emergency Hose testing and replacement requirements.

Increased branch locations for better, more convenient service.

COMING SOON – New Website featuring customer login and online ordering facility for your favourite products.

group Codeeg 02 is for PVC Suction Hoses

Understanding the Powell Industrial part numbering systemIt goes without saying, but we have an enormous range of product lines available to purchase. And in each of these products lines exists a great number of variations to the line whether it be size, material etc. More often than not it can be very confusing when attempting to order or identify the products we sell. This is why we've created a part numbering system to assist with the ordering and identification of our products, not only for customers but also for our staff. By following the below formula it should make the process of purchasing and identification of products easier.

Hose Part Number Example:

Sub-groups – Hoses

Fittings Part Number Example:

Sub-group Codeeg 000 is for AIR/WATER hose – Performer Grey Suction Hose

Size Codeeg 102 is for 102 mm ID

Length Codeeg 20 is for 20 metres

02 - 000 -102 - 020

group Codeeg 25 is for Valves

Sub group Codeeg 000 is for Standard Ball Valves - Female x Female

Size Codeeg 32 is for 2 Inch

25 - 000 - 032

NB: All ID of Hoses are Nominal Bore and listed in Metric numbers

NB: Fittings however are general inch fittings - i.e. 4" Valve or 2" BSP x 2" Hose Tail etc As such we list all inch fittings in 1/16th of an inch as per our sizing chart. See the following pages.

Hoses Sub-groups Product Use

000 - 199 AIR / WATER

200 - 300 MULTIPURPOSE

300 - 399 HOT WATER / STEAM

400 - 599 FUEL / OIL / PETROLEUM BASED

600 - 799 FOOD GRADE

800 - 899 MATERIAL HANDLING

900 - 990 CHEMICAL HOSE

Hose AssembliesStandard Stock Hose Assemblies are listed with the applicable Sub-Group of hose with the number '9' added before the size of the hose to define it as an assembly.

eg 04-000-9051-020CEW

Part NumBer HOw tO guIde

Sizing ChartThis table executes the metric and imperial formulas used to devise the size code component for the Powell Part Numbers of all fittings.

Exceptions: Camlocks have been coded as per their type – a 2" C-Type camlock is now a C200 (200 being 2"). The usual Sub-Group Part Number component refers to the material (and or use) of the camlock. See below.

Naturally there are other exceptions where it is not possible to fit the above.

Metric (mm) Part Number size Imperial Part Number size (Inches) Part Number dash size

3 -003 1/8 -002

5 -005 3/16 -003

6 -006 1/4 -004

8 -008 5/16 -005

10 -010 3/8 -006

12 -012 1/2 -008

16 -016 5/8 -010

20 -019 3/4 -012

22 -022 7/8 -014

25 -025 1 -016

32 -032 1¼ -020

38 -038 1½ -024

44 -044 1¾ -028

51 -051 2 -032

63 -063 2½ -040

76 -076 3 -048

88 -088 3½ -056

102 -102 4 -064

114 -114 4½ -

127 -127 5 -080

140 -140 5½ -

152 -152 6 -096

165 -165 6½ -

178 -178 7 -112

203 -203 8 -128

254 -254 10 -160

305 -305 12 -192

356 -356 14 -224

406 -406 16 -256

457 -457 18 -288

508 -508 20 -320

559 -559 22 -352

610 -610 24 -384

Camlocks group & Sub-group Material (and or use)

20-000 ALUMINIUM

20-100 ALUMINIUM - MIL SPEC & ADAPTORS

20-200 STAINLESS STEEL

20-300 BRASS

20-400 BRONZE

20-500 POLYPROPYLENE

20-600 NYGLASS

20-700 DRY DISCONNECT

20-800 SAFETY BUMPS

20-900 SPARE PARTS- SEALS ETC


Product groups group Codes for Part Numbers

Hoses & Hose Assemblies

00 - PVC Pressure

02 - PVC Suction

04 - Layflat

06 - Ducting

08 - Rubber - Extruded

10 - Rubber - Wrapped

16 - Composite

19 - Assembly components (Crimp Shells & Ferrules)

Fittings (Hose Couplings) 20 - Camlocks

21 - Claw, Muff, Irrigation, Bauer & Travis Couplings

22 - Hose Tails (metal)

23 - Fire (CFA, MFB, QRT etc)

25 - Valves (Ball, Gate, Foot, Butterfly etc)

27 - Hose Tails (Plastic)

28 - Guns & Nozzles, Gauges (Domestic Garden)

Pneumatics 30 - Quick Release Couplings

31 - Tubing

32 - Push In Fittings (All)

33 - Brass Tube Fittings - Compression, Flare etc

34 - Stainless Steel Compression Fittings

36 - Pneumatics, Filters, Regulators & Components

Clamps & Clamping Systems

40 - Wormdrive Clamps

42 - Super Clamps (T-Bolts)

43 - Double Ear & O'Clips (Specialist Clamps)

44 - Industrial Clamps (Spiral, HPC, Double Bolt etc)

45 - Cable Ties

46 - BAND-IT Bands & Banding

47 - Pipe Clamps (P-Clamps)

48 - Hydraulic Tube Clamps

49 - Miscellaneous Clamps, Unicoil etc

Product groups group Codes for Part Numbers

Fittings (Screwed) 50 - Brass Screwed

51 - Aluminium Screwed

52 - Gal Mal & Carbon Steel (3000 lb)

53 - Buttweld & Flanges

54 - Stainless Steel Screwed & Buttwelds

55 - Stainless Steel Sanitary (Food BSM, Triclovers, Wine)

58 - Plastic Screwed & Air Pipe Fittings

59 - Roll Grooved, Shoudered Couplings

Hose Reels 60 - Hose Reels

Accessories & Consumables

61 - Tyre Inflation, Tyre Chucks & Air Guns

63 - Meshes (Oyster, Barrier)

64 - Greasing Equipment, Lubrication, Oil

65 - Workshop Equipment

66 - Pipe Repairers, Putty & Wraps

67 - Tapes & Sealants (Teflon Tape)

68 - Spill Control & Abrasives

69 - Tools (Pipe Cutters, Benders, Crimping)

24 - Drilling Fluids

Rubber 70 - V-Belts

71 - Pulley & Taperlock

75 - Sheet, Insertion, Matting & Flooring, Profiles & Sponges

77 - Vibration Mounts

Hydraulics 80 - Hydraulic Hose

81 - Crimp Hydraulic Hose Fittings

82 - Hydraulic Adaptors

83 - Hydraulic Tube Fittings (Steel Compression Style)

85 - Ferrules (Brass, Aluminium, Stainless Steel)

86 - Hydraulic Valving, Crimpers & Components

88 - Hose Protectors (Spiral Guard & Whipchecks)

Merchandising 90 - Merchandiser Stands and Parts

Product group Codes

Hose Length Part Number ComponentWhere hose Part Numbers are listed you may notice three astericks sitting in the Length Code component of the Part Number. These three astericks have been used to identify that either multiple or custom lengths of this hose, up to the listed maximum length documented in the table, can be purchased.

eg 04-000-051-***


Rubber 15PVC Pressure 63PVC Suction 79Layflat 91Ducting 97Composite 105

Camlocks 111 Hose Tails 127 Couplings 139Clamps 149Valves 169Brass Screwed 185Pipe Fittings 193Stainless Steel Screwed 213Polypropylene/Nylon 225Guns & Nozzles 235Domestic Garden 245

Pneumatic Tube & Air Pipe 249Pneumatic Push-In 255Pneumatic Quick Couplings 263Pneumatic Accessories 275

Manual & Automatic Rewind 279

Rubber Sheet 291Matting 299Rubber Profiles 302Foam Tapes 307

Hydraulic Hoses 311Hydraulic Hose Tails 321Hydraulic Adaptors 329Hydraulic Quick Couplings 335Hydraulic Accessories 343

Spill Control 348Thread Tapes, Adhesives, Pastes & Sealants 354Hose Protectors 357Mesh 359V-Belts 362Drilling Mud & Accessories 364

Conversion Charts & Equations 374Hose Properties 379Chemical Resistance Charts – PVC & General 385Terms & Conditions of Agreement 401

If you are having trouble finding the product you require please don't hesitate to contact your local Powell Industrial Branch for assistance.

Contact details can be found on the back cover for all our branches.

IMPORTANT NOTES: You are currently viewing a single section or sub-section of the entire Powell Industrial Product Catalogue – Version 2.

This Table of Contents is the universal page numbering for all sections combined and therefore this copy may not reflect what is found in this document. Each of these sections (in green) and their sub-sections can be viewed and downloaded directly from our website.

If you'd like a printed copy of this catalogue please call you local Powell Industrial branch. The final page of this catalogue section houses all branch contact details.

All products found in this catalogue may not be readily available at every Powell Industrial branch.

HOses 15–110

fIttINgs 111–248

PNeumatIcs 249–278

HOse reels 279–290

ruBBer 291–310

HydraulIcs 311–346

accessOrIes & cONsumaBles 347–372

INdex 403–406

cHarts & taBles 373–407

taBle Of PrOduct cONteNts

139

COUPLIN

GS

FITTINGS – COUPLINGS

BAUER

TRAVIS PATTERN

CLAW

VICTAULIC

STRAINERS

MUFF

STEAM & GROUND JOINTS

STORZ

QRT

CFA

MFB & NSW FIRE BRIGADE

HOSES

PNEUMATIC

SHOSE R

EELS

RUBBER

HYDRAULIC

SACCE

SSORIES &

CO

NSUMABLE

S

FITTINGS –COUPLINGS

140

COUPLINGS

HOSES

PNEUMATICS

HOSE R

EELS

RUBBER

HYDRAULICS

ACC

ESSORIES &

CO

NSUMABLE

S

Bauer Type B Couplings – Flanged Table D

Size (Inches)Zinc Alloy Coupling Parts

Male Ball x Flange (Closure ring inc.) Female Socket x Flange

2 21-550-032 –

3 21-550-048 21-560-048

4 21-550-064 21-560-064

6 21-550-096 21-560-096

8 21-550-128 21-560-128

Bauer Type B CouplingsBauer Couplings are quick action fittings with four parts:- Male Ball, Closure Ring Female Socket and Sealing Ring.

Size (Inches)

Zinc Alloy Coupling Sets Zinc Alloy Coupling Parts

Complete Sets Male Ball x Hose Tail

Female x Hose Tails (inc Seal) Closure Rings Replacement

Seals

2 21-500-032 21-510-032 21-520-032 21-530-032 21-540-032

3 21-500-048 21-510-048 21-520-048 21-530-048 21-540-048

4 21-500-064 21-510-064 21-520-064 21-530-064 21-540-064

6 21-500-096 21-510-096 21-520-096 21-530-096 21-540-096

8 21-500-128 21-510-128 21-520-128 21-530-128 21-540-128

Other sizes up to 12" and Stainless Steel made to order also available on request.

A single movement engages and locks the coupling, compressing the sealing ring to ensure a leak-proof joint under either suction or pressure (150 psi working pressure) applications. The spherical construction of the ball and socket ensures the seal is equally efficient at coupling angles up to 30 degrees (less for 150 mm and 200 mm).

Bauer Type B Couplings – Male BSP


Female Socket x Male BSP (Seal not inc.) Male Ball x Male BSP

2 21-570-032 21-580-032

3 21-570-048 21-580-048

4 21-570-064 21-580-064

6 21-570-096 21-580-096

8 21-570-128 21-580-128

Bauer Type B Couplings – Various Parts

Size (Inches)

Zinc Alloy Coupling Parts

Bauer End Cap Strainer (Suit Female Socket) (Male closure ring inc.)

4 21-590-064 21-601-064

6 21-590-096 21-601-096

8 21-590-128 21-601-128


141

COUPLIN

GS

HOSES

PNEUMATIC

SHOSE R

EELS

RUBBER

HYDRAULIC

SACCE

SSORIES &

CO

NSUMABLE

S

Bauer Type B Couplings – Weld ons


Female Socket Weld on Male Ball Weld on

3 21-681-048* 21-690-048*

4 21-681-064 21-690-064

6 21-681-096 21-690-096

8 21-681-128 21-690-128

The entire Travis Couplings range and Adaptors are also available.

Bauer Type B Couplings – Reducers

Female x Male Size (Inches)

Zinc Alloy Coupling Parts

Female x Male

4 x 6 21-621-064-096

6 x 4 21-621-096-064

8 x 6 21-621-128-096

Travis CouplingsThese couplings are ideally suited for use in the waste transfer and aquaculture industries.

Size (Inches)Zinc Plated Steel Coupling Parts

Complete Sets

3 21-800-048

4 21-800-064

5 21-800-080

6 21-800-096

8 21-800-128

When it comes to making a safe and secure connection for the movement of valuable and hazardous materials these fittings are exceptional. Made from only the best raw materials and to the highest quality manufacturing standards, Travis Couplings can be relied on to get the task done - minimising failures and maximising efficiencies. For vacuum use and working pressures up to 100 psi.

*90 mm ball.


142

COUPLINGS

HOSES

PNEUMATICS

HOSE R

EELS

RUBBER

HYDRAULICS

ACC

ESSORIES &

CO

NSUMABLE

S

Claw Couplings come in three variations:- Types A, B and S. Each variation offers a different connection style. These images identify the different styles available.

A and S Type Claw Coupling Specifications:MATERIALS: Zinc Plated Carbon Steel or 316 Stainless SteelWORKING PRESSURES: 300 psi. NATA tested & certified to 1500 psi.STANDARDS: Zinc Plated Carbon Steel Claw Couplings meet AS2074. Stainless Steel Claw Couplings meet AS2554 & AS2660.

Claw Couplings –Type A (Twin Lug)These Couplings have a recommended maximum working Pressure of 500 psi and are made from Carbon Steel or 316 Stainless Steel. It is recommended that they are attached using interlocking Claw Clamps. Type A Claw Couplings are universally interchangeable between all different sizes.

Size (Inches)

Material, Type & Thread

ZP C/Steel Hose Tail

ZP C/Steel BSPT

ZP C/Steel Female BSPT

316 S/Steel Hose Tail

316 S/Steel Male BSPT

316 S/Steel Female BSPT

3/8 21-000-006 21-001-006 21-002-006 - - -

1/2 21-000-008 21-001-008 21-002-008 21-180-008 21-181-008 21-182-008

3/4 21-000-012 21-001-012 21-002-012 21-180-012 21-181-012 21-182-012

1 21-000-016 21-001-016 21-002-016 21-180-016 21-181-016 21-182-016

Claw Couplings –Type A Parts

Size (Inches)

Material and or Type

Iron Three Way End Plug Gaskets Safety Pin No More

Clamps

1/2 - - - - 21-080-008

Suit ½ to 1 21-003-000 21-004-000 - 21-008-000 -

3/4 - - - - 21-080-012

½ to 1 (Rubber)* - - 21-005-000 -

½ to 1 (Viton)* - - 21-005-100 - -

½ to 1̂ - - 21-005-200 - -

1 - - - - 21-080-008

Powell Power Facts: Claw Coupling Types

*Standard seal. ^ Bellow Seal

A B S


143

COUPLIN

GS

HOSES

PNEUMATIC

SHOSE R

EELS

RUBBER

HYDRAULIC

SACCE

SSORIES &

CO

NSUMABLE

S

Claw Couplings –Type SType S Claw Couplings are universally interchangeable between sizes. These Couplings have a recommended maximum working pressure of 1000 psi and are made from Carbon Steel. It is recommended that they are attached using interlocking Claw Clamps.

3/8, 1/2, 3/4,1 & 1¼ – Interchanges any size. 1½ & 2 –Interchange. 3 – Interchanges same size only.

Size (Inches)Material, Type and Thread

ZP C/Steel Hose Tail ZP C/Steel Male BSPT ZP C/Steel Female BSPT

1/2 21-100-008 21-101-008 21-102-008

3/4 21-100-012 21-101-012 21-102-012

1 21-100-016 21-101-016 21-102-016

1¼ 21-100-020 21-101-020 21-102-020

1½ 21-100-024 21-101-024 21-102-024

2 21-100-032 21-101-032 21-102-032

3 21-100-048 21-101-048 21-102-048

Victaulic Grooved Couplings

Size (mm)Part Type

Roll Groove Coupling Gasket

48 59-000-048 59-009-045

60.3 59-000-060 59-009-060

73.0 59-000-073 59-009-073

88.9 59-000-088 59-009-088

114.3 59-000-114 59-009-114

168.3 59-000-168 59-009-168

Adaptors and accessories also available to order.

Claw Couplings –Type BAll sizes are interchangeable.

Size (Inches)Material & Type

ZP C/Steel Hose Tail ZP C/Steel Male BSPT ZP C/Steel Female BSPT

3/8 21-200-006 - 21-202-006

1/2 21-200-008 21-201-008 21-202-008

3/4 21-200-012 21-201-012 21-202-012

1 21-200-016 21-201-016 21-202-016

Stainless Steel range also available to order. Part number prefixes 21-190, 21-191 & 21-192


144

COUPLINGS

HOSES

PNEUMATICS

HOSE R

EELS

RUBBER

HYDRAULICS

ACC

ESSORIES &

CO

NSUMABLE

S

Muff CouplingsSuit Table D, E and ANSI flanges. Extended bolt holes allow for all three drilling patterns. Used with Muff Coupling Hoses.

Size (Inches)Material

Aluminium

2 21-400-032

3 21-400-048

4 21-400-064

5 21-400-080

6 21-400-096

8 21-400-128

10 21-400-160

12 21-400-192

Steam fittings & Ground JointsUse with high pressure clamps.

Size (Inches)

Coupling Sets Component Parts

Ground Joint Complete Sets* Male Stem

Spuds Spare Parts

Female Spud Male Spud Hose Stem Swivel Nut

1/2 22-400-008 22-010-008-008 22-404-008 22-406-008 22-402-008 22-403-008

3/4 22-400-012 22-010-012-012 22-404-012 22-406-012 22-402-012 22-403-012

1 22-400-016 22-010-016-016 22-404-016 22-406-016 22-402-016 22-403-016

1¼ 22-400-020 22-010-020-020 22-404-020 - - -

1½ 22-400-024 22-010-024-024 22-404-024 22-406-024 22-402-024 22-403-024

2 22-400-032 22-010-032-032 22-404-032 22-406-032 22-402-032 22-403-032

2½ 22-400-040 22-010-040-040 22-404-040 - 22-402-040 -

3 22-400-048 22-010-048-048 22-404-048 - - 22-403-048

4 22-400-064 22-010-064-064 - - - -

*NPT threads also available to order on request.

Cast Iron couplings coming soon.

Strainers

Size (Inches)Material, Type and Thread

Zinc plated Basket Threaded BSP Zinc plated Basket (Hose Tail inc.)

1½ 28-320-024 28-310-024

2 28-320-032 28-310-032

2½ 28-320-040 28-310-040

3 28-320-048 28-310-048

4 28-320-064 28-310-064

6 28-320-096 28-310-096

8 28-320-128 -


145

COUPLIN

GS

HOSES

PNEUMATIC

SHOSE R

EELS

RUBBER

HYDRAULIC

SACCE

SSORIES &

CO

NSUMABLE

S

Storz Couplings

Coupling (mm) x Type (Inches)

Size

Material, Type and Thread

Alloy Hose Tail Alloy Male BSPT Alloy Female BSPT

25 x 3/4 23-100-016-012 23-101-016-012 23-102-016-012

25 x 1 23-100-016-016 23-101-016-016 23-102-016-016

38 x 1½ 23-100-024-024 23-101-024-024 23-102-024-024

50 x 1½ 23-100-032-024 23-101-032-024 23-102-032-024

50 x 2 23-100-032-032 23-101-032-032 23-102-032-032

65 x 1½ 23-100-040-024 23-101-040-032 23-102-040-032

65 x 2 23-100-040-032 23-101-040-032 23-102-040-032

65 x 2½ 23-100-040-040 23-101-040-040 23-102-040-040

75 x 2 23-100-048-032 23-101-048-032 23-102-048-032

75 x 3 23-100-048-048 23-101-048-048 23-102-048-048

100 x 4 23-100-064-064 23-101-064-064 23-102-064-064

110 x 4 - 23-101-071-064 23-102-071-064

125 x 5 23-100-080-080 23-101-080-080 23-102-080-080*

150 x 6 23-100-096-096 23-101-096-096 23-102-096-096

*125 x 5 also available in locking variation. Part number 23-102-080-080L

Storz Coupling –Caps

Size (mm)Material & Type

Alloy Cap

25 23-103-016

38 23-103-024

50 23-103-032

65 23-103-040

65 23-103-040P

75 23-103-048

100 23-103-064

125 23-103-080

150 23-103-096

P= Plastic

Storz Washers also available to order. Please contact your local Powell Industrial Branch for more information.Part number prefix 23-110 & 23-111

Storz Coupling– Accessories

Size (mm) Spanner

40–65 23-120-040

50–75 23-120-048

75–50 23-120-064


146

COUPLINGS

HOSES

PNEUMATICS

HOSE R

EELS

RUBBER

HYDRAULICS

ACC

ESSORIES &

CO

NSUMABLE

S

QRT (Queensland Rope Thread) Fire Brigade Fittings

Size (Inches)

Material & Type (BSP)

Brass Female x Hose Tail

Brass Male x Hose Tail

Brass Female x Male

Brass Male x Male

Alloy Female x Hose Tail

Alloy Male x Hose Tail

2½ x ¾ - - 23-502-012 - - -

2½ x 1 - - 23-502-016 - - -

2½ x 1¼ - - 23-502-020 - - -

2½ x 1½ 23-501-024 23-510-024 23-502-024 23-511-024 23-501-024A 23-510-024A

2½ x 2 23-501-032 23-510-032 23-502-032 23-511-032 23-501-032A -

2½ x 2½ 23-501-040 23-510-040 23-502-040 - 23-501-040A -

2½ x 3 23-501-048 23-510-048 - - - -

QRT (Queensland Rope Thread) Fire Brigade Fittings Caps Plugs and Accessories.

Size (mm)

Material & Type

Brass Female Cap

Alloy Female Cap

Poly Female Cap Brass Male Plug

2½ 23-520-000 23-520-001 23-520-002 23-520-010

Material & Type

Ring & Tail Washer Spanner Hydrant R&T Gasket Jet Tip Female (1 Inch)

23-530-040 23-540-000 23-599-165820 23-599-165840

WAJAX FittingsUniveral Lug Couplings

All sizes are interchangeable.

Size (Inches)Type and Thread

Male BSP Female BSP Cap

3/4 23-051-012 23-052-012 23-053-012

1 23-051-016 23-052-016 23-053-016

1¼ 23-051-020 23-052-020 23-053-020

1½ 23-051-024 23-052-024 23-053-024


147

COUPLIN

GS

HOSES

PNEUMATIC

SHOSE R

EELS

RUBBER

HYDRAULIC

SACCE

SSORIES &

CO

NSUMABLE

S

Victorian CFA Fittings3 TPI

Size (Inches)

Material & Type


Brass Female x Male

Brass Female x Female


Brass Male x Male

1 - 23-202-016 - - -

1½ 23-201-024 23-202-024 23-203-024 23-210-024 23-211-024

2 23-201-032 23-202-032* 23-203-032 23-210-032 23-211-032

2½ 23-201-040 23-202-040 23-203-040 23-210-040 23-211-040

3 23-201-048 23-202-048 - 23-210-048 23-211-048

*23-202-0325 size also available. S= Swivel

Victorian CFA Fire Fitting Adaptors, Caps and Plugs.

Size (mm)


Brass CFA Female x MFB Male

Brass CFA Male

x MFB Female

Brass CFA MFB/FBT Female x

CFA Male

Blanking Cap with Chain

Male Blanking Plug

with Chain

- 23-205-000 23-205-010 23-205-020 23-220-000 23-220-001

MFB Fittings5 TPI

Size (Inches)



Brass Female x Male BSP

Brass Female x Female BSP


Brass Male x Male BSP

MFB Male x Female BSP

3/4 - 23-302-012 - - - -

1 - 23-302-016 - - - -

1½ 23-301-024 23-302-024 23-303-024 23-310-024 23-311-024 -

2 23-301-032 23-302-032 23-303-032 23-310-032 23-311-032 23-312-032

2½ 23-301-040 23-302-040 23-303-040 23-310-040 23-311-040 23-312-040

3 23-301-048 23-302-048 23-303-048 23-310-048 23-311-048 23-312-048

Size (mm)Material & Type (BSP)

Plastic MFB Male & Female Hose Tail Set

38 23-300-024

63 23-300-040

MFB Fire Brigade Poly Sets


148

COUPLINGS

HOSES

PNEUMATICS

HOSE R

EELS

RUBBER

HYDRAULICS

ACC

ESSORIES &

CO

NSUMABLE

S

NSW Fire Fittings5½ TPI

Size (Inches)



Brass Female x Male BSP

Brass Female x Female BSP


Brass Male x Male BSP

FBT Male x Female BSP

3/4 - 23-402-012 - - - -

1 - 23-402-016 - - - -

1½ 23-401-024 23-402-024 23-403-024 23-410-024 23-411-024 -

2 23-401-032 23-402-032 23-403-032 23-410-032 23-411-032 23-412-032

2½ 23-401-040 23-402-040 23-403-040 23-410-040 23-411-040 23-412-040

3 23-401-048 23-402-048 23-403-048 23-410-048 23-411-048 23-412-048

BIC Couplings (John Morris) also available to order. Please contact your local Powell Industrial Branch for more information.BIC Female x Hose Tail. Part number prefix 23-700

BIC Female x Male BSP. Part number prefix 23-702

BIC Female x Female BSP. Part number prefix 23-703

BIC Male x Hose Tail. Part number prefix 23-701

BIC Male x Female BSP. Part number prefix 23-705

BIC Male x Male BSP. Part number prefix 23-711

BIC Male Plug. Part number prefix 23-715

BIC Female Cap. Part number prefix 23-718

BIC Seals & Gaskets. Part number prefix 23-730

HmP

Powell Industrial Hose Management Program powered by INFOCHIP can include a range of the following features:• Review of your current hose assembly use and needs• Review that the hoses are fit for application• Agree on maintenance program to suit your business• All hoses whether existing under a maintenance program or new, are

tested to Australian Standards following NAHAD guidelines, which can be on-site at your premises with our mobile test facility or off-site at our own maintenance facility

The following is included in our test and record stage:

Through the unique INFOCHIP integrated solution you can:• View hose assembly history & records online 24/7• Receive automated e-mail alerts advising on a hose that's due

for a re-testing inspection• Use RFID Chips and portable readers with Internet upload allowing you

to immediately identify a hoses location, history of repairs, certifications etc• See test certificates instantly for each identified hose online

For more information regarding our Hose Management Program and how it can work for you please speak with your Account Manager or call your local branch and ask for an introduction to HMP. If you wish to learn more about INFOCHIP you can visit the the INFOCHIP website www.infochip.com

HmP – HOsemaNagemeNtPrOgram

• Test number and Visual Tag• Allocation of INFOCHIP

RFID Chip• Date of inspection and/or testing• Retest date tracking if required• Name of person performing

the test

• Description of hose and its condition

• Test Pressure• Working Pressure• Result of test and/or

inspection

HOse assemBlIes Our speciality is the supply of fitted hose assemblies that can be tagged, tested and implanted with an RFID Microchip to track the hose through its life cycle. All of our hose assemblies are built to the relevant NAHAD or Australian Standard, to ensure total compliance to every state legislation.

Testing The Testing Procedure

VISUAL INSPECTIONSThe visual inspection allows us to pick up any mechanical damage, corrosive damage or wear and tear that may have occurred during installation, use or even during storage. Each hose assembly is inspected for kinks, loose covers, bulges or ballooning, soft spots, cuts, broken wires or any obvious defect in the hose. The fittings and attachments are inspected for any type of visual defect that may affect the performance of the assembly also.

PRESSURE AND SUCTION TESTINGHose testing is a procedure conducted at Powell Industrial to ensure that any hose we build for either pressure or suction purposes will perform efficiently and reliably in its intended application. Whilst we provide pressure and suction hoses to a variety of customers, our most predominant recipients of tested hose assemblies include Original Equipment Manufacturer’s (OEM’s) of specialised vehicles.

If required, any hose assembly built at Powell Industrial can be subjected to either pressure or suction testing. All testing is carried out in strict accordance with Australian Standard AS1180 7J & NAHAD Standards.

HmP HOse testINg

stamPed & NaHad

assOcIatIONs & PrOcedures

More benefits to having Powell Industrial as your key partner in the supply of Industrial Hose and Fittings:• Powell Industrial are proud members of NAHAD, the US based key world

Association for Hose and Accessories Distribution• Most of our frontline sales and warehouse staff have sat and passed the

NAHAD exam for Industrial Hose Assembly Specification Guidelines

• We are a member of ADIA – The Australian Drilling Industry Association

• S.T.A.M.P.E.D. – at Powell Industrial we strictly follow the STAMPED procedure to insure as best as we can that we supply the correct hose for your application. In co-operation with our customers, by following STAMPED we endeavour to obtain the maximum information required to provide a quality hose assembly

S SIZE ID, OD and length.

T TEMPERATURE Of the material conveyed & the environment.

A APPLICATION Conditions of use. Delivery, suction or both.

M MATERIAL Contents being conveyed, type & concentration.

P PRESSURE What the assembly will be exposed to.

E ENDS Style, type, orientation, attachment.

D DELIVERY Testing, quality, packaging, delivery timing.

HOse assemBly

request sHeet

STAMP

E

D

s t a m P e d HOse assemBly request

SIZE ID/OD/Length

I.D.(mm)

O.D.(mm)

Length (m)

Overall Length (m) Quantity Comments

Address:

Ph: Order date: Date Required:

Customer contact: Company:

test: Pressure Vacuum Untested Comments:

TEMPERATURE Material conveyed

& environment

Internal ºCSpecify/comment:

External ºC

APPLICATION Conditions of use

SuctionNotes:

DeliveryNotes:

MATERIAL Material being

conveyed

Water Air Abrasive Steam Petrol/Oil Chemical

Details:

PRESSURE Assembly will be

exposed to

kPa PSI Bar Comments

DELIVERY Testing, quality, packaging, time

Collect Courier Transport

Special instructions

ENDSOrientation, style, type, attachment

method

End 1Description:

End 2Description:

HoseDescription:

Fittingmethod

Crimp/Ferrule: Clamps: Qty per end: Bolt: Type: Other details:

Alum SS

Plated Steel

Worm T Bolt

SemiSS FullSS

2 Bolt

4 Bolt

Customer copy: Photocopy this form, complete fields and then scan and e-mail or fax to your nearest Powell Industrial Branch

WARRANTY:Powell Industrial is a ‘distributor‘ and not a manufacturer of products. We offer the ‘Warranty’ provided by the original manufacturer and are bound solely by these requirements.

On items directly imported (therefore the deemed manufacturer), the warranty offered varies depending on the product and the original source of manufacture. Most items are warranted against faults and defects in manufacture for a period of 12 months, however Powell Industrial assumes no responsibility for the following:

• Improper installation or failure to follow fitting nor application instructions• Exceeding manufacturers pressure or material guidelines• Failure due to improper maintenance• Indirect or consequential loss or damage• Cost of freight or travelling time• Product ‘Fit for Use’ is to be solely ascertained by the customer unless specifically requested

in writing to Powell Industrial, and Powell Industrial confirms in writing of specific ‘Fit for Use’ requirements

TRADINg HOURS:Monday to Friday – check with your local branch.

SETTLEMENT TERMS:All trade credit accounts are strictly nett 30 days from the close of the month that items have been invoiced. Non account customers are strictly CBD – (Cash Before Delivery through accepted credit card or EFT deposit in clear funds).

gST:Prices quoted are based on Business to Business trading, and generally are exclusive of GST. GST or any tax applicable will be governed by the laws operating in Australia at the time of sale.

SPECIAL ORDERS:Non stock items sourced and purchased on your behalf are subject to the relevant suppliers trading terms and conditions.

All Special Orders MUST be received in writing and will include a signed Powell Industrial Special Order confirmation form. Unless due to faulty manufactured product, Special Ordered items are NON RETURNABLE or refundable.

Hose or Hose Assemblies cut or made to customers requirements, whether from stocked lines or specially ordered are NON-RETURNABLE

RETURNS FOR CREDITStock items maybe returned for credit providing the following:

• Company is notified within 14 days• Goods returned must be in original condition, free from defects and in Powell Industrial’s view, ‘Fit for Sale’• Copy of invoice to accompany goods for return is provided• Return authority reference will be provided and needs to be attached to goods• Cuts of products, special manufactured assemblies and non-stock buy ins are all non-returnable• Re-stocking fee of 25% plus reimbursements freight costs apply

FAULTY OR DAMAgED gOODSAbove conditions apply, however Powell Industrial reserves the right to reject any claim(s) where the item has been opened, installed or used in any application that is not ‘Fit for Purpose’ or that may void the manufacturer’s warranty.

warraNty

CHARTS &

TABLE

SHOSE R

EELS

PNEUMATIC

SACCE

SSORIES &

CO

NSUMABLE

SHYDRAULIC

SFITTIN

GS

RUBBER

CATALOGUE DISCLAIMERS

POWELL INDUSTRIAL makes every effort to provide accurate information within its catalogues. However, it will not be held responsible for errors (pictorial or written) and omissions arising from oversights, printing errors, errors in source material and changes in manufacturers' specifications.

Information provided relating to product specifications is believed correct at the time of compilation of the catalogue. Manufacturers' specifications can change from time to time and are not always communicated by them. Nor is itpossible for POWELL INDUSTRIAL to retrospectively advise its customers of these changes. In addition; POWELL INDUSTRIAL reserves the right to substitute similar brands or products for the listed products application due tothe non-availability of the listed product or brand; or other reason(s) as it sees fit. If you have a concern about a substituted product please discuss with our Customer Service staff or your POWELL INDUSTRIAL representative.

Where it is known that the correct specification of hose &/or fittings &/or assembly method is critical either from a performance or safety perspective, POWELL INDUSTRIAL recommends that such requirements are confirmed as being met by the product &/or assembly specifications before putting said products &/or assemblies into service.

Imagery: Actual products supplied may vary in appearance to those pictured as reference in this catalogue. All images should be used as a guide only.

Please note all products found in this catalogue may not be readily available at every Powell Branch location.

NB: Fuel Compatibility. Modern fuel additives and blends e.g. Ethanol; can render traditionally used hoses unsuitable for fuel transfer. Many compatibility charts and manufacturers catalogues are yet to catch up with these changes; e.g. PVC hoses that have traditionally been made with a Fuel Resistant PVC blend; in the main are not compatible with Ethanol in fuel. If you intend using a hose for the transfer of Ethanol fuel, Bio Fuel or other 'non-standard' fuel or additive, you should advise POWELL INDUSTRIAL of this and seek confirmation that the product to be supplied is compatible.

The GOODYEAR (and Winged Foot Design) trademark is used by Veyance Technologies, Inc. under license from The Goodyear Tire & Rubber Company. Goodyear Engineered Products are manufactured and sourced exclusively by Veyance Technologies, Inc. or its affiliates. The following trademarks are licensed to Veyance Technologies, Inc. by The Goodyear Tire & Rubber Company, including Goodyear, Spiraflex, Horizon, Verigard, Ortac, Wingfoot, Flexten, Carbryn, Gorilla, Chemivac, Extremeflex, Plicord, Fortress, Flexsteel, Chemigum, Chem One, Wingprene, Pyraflex, Hysunite, Turfsyn, Artrac, Alphasyn, Chemrin, Omegasyn, Vintner, Flexwing, Pliovic and Insta-Lock. ©2008 Veyance Technologies, Inc. All Rights Reserved. Gates, Mustang, Terminator, Premo Flex, Food & Beverage Master, Cellar Master, Food Master, Green Stripe, Stallion and Redback are registered trademarks and Adapta Flex, Sanitron, Gatron and Power Clean are trademark and Gatron is a registered trademark of. The Gates Rubber Company. Viton is a registered trademark of DuPont Dow Elastomers L.L.C. Teflon is a registed trademark of E.I. du Pont de Nemours and Company. Microban is a registered trademark of Microban International, Ltd. Kanaflex and Kanaline are registered trademarks of the Kanaflex Corporation Co., Ltd. IPL and Vulcano are registered Trademarks of Industrie Plastiche Lombarde S.p.A. Santoprene is a registered trademark of Advanced. Elastomer System. Parker Hannifain is a registered trademark of. Parker Intangibles LLC. Preston and Optima are registered trademarks of Powell Industrial Pty Ltd. Oroflex is a trademark of BELEGGINGSMAATSCHAPPIJ NOVENTU B.V. Philmac is a registered trademark of Philmac Pty Ltd. BAND-IT, Ultra-Lok and BAND-IT JR are a registered trademarks of BAND-IT- IDEX, Inc. Neta is a registered trademark of. Neta Industries Pty Ltd. Norma, Normaflex, Torro, Normafix, Cobra, Normaconnect and Bandimex Banding are registered trademarks of. Norma Germany GMBH. Stepless is a registered trademark of. HANS OETIKER AG MASCHINEN- UND APPARATEFABRIK. Sunnyhose is a registered trademark of. Takata Corporation. Goodall, Century and Long Life are registered trademarks of. Lewis-Goetz and Company, Inc.

DISCLAIMER

Mackayphone 07 4952 1666fax 07 4952 1133Unit 2, 3 Ginger StreetMackay Qld [email protected]

Coopers Plainsphone 07 3722 3722fax 07 3722 37331/76 Postle StreetCoopers Plains Qld [email protected]

Geebungphone 07 3722 3722fax 07 3722 3733238 Robinson Road Geebung Qld [email protected]

Townsvillephone 07 4775 4855fax 07 4775 476677 Pilkington StreetGarbutt Qld [email protected]

Newcastlephone 02 4028 6810fax 02 4028 6835Unit 6, 26 Balook DriveBeresfield NSW [email protected]

Wetherill Parkphone 02 9756 1244fax 02 9756 1534Unit 2, 1269 The Horsley Drive,Wetherill Park NSW [email protected]

Derrimutphone 03 8353 2835fax 03 8353 2879Unit 1, 2 Derrimut DriveDerrimut Vic [email protected]

Hobartphone 03 6272 1055fax 03 6272 14858A Lampton Avenue,Derwent Park Tas [email protected]

Braesidephone 03 9588 1440Fax: 03 9588 1441Factory 1, 252 Governor RoadBraeside Vic [email protected]

Kilsythphone 03 9588 1440fax 03 9588 1441Unit 3, 120 Canterbury RoadKilsyth South Vic [email protected]

Burniephone 03 6431 4068fax 03 6431 67276–8 Wellington Street,South Burnie Tas [email protected]

Welshpoolphone 08 9358 5900fax 08 9358 5911Unit 6, 16 Kewdale Road,Welshpool WA [email protected]

Powell Industrial Branches

Imagery used in this catalogue is as a guide only and may not depict the actual product stocked. All product specifications are subject to supplier changes. POWELL INDUSTRIAL PTY LTD ACN 010 035 346 1/76 Postle Street, Coopers Plains, Qld 4108 POW007

Powell Industrial Catalogue – Couplings Industrial, formerly known as Tony Powell Hose and...

Documents

Transcript of Powell Industrial Catalogue – Couplings Industrial, formerly known as Tony Powell Hose and...