Poster Programme Poster Session 1 Wednesday, 20 May 2015 ... · Poster Programme Poster Session 1 ....

Fourth International Conference Frontiers in Polymer Science | Poster Programme

Poster Programme

Poster Session 1 Wednesday, 20 May 2015 at 16:00-17:30 and 19:10-21:00

[P1.001] Dendrimers based on triazines for the synthesis of discrete molecules with the dimensions of viruses

E.E. Simanek, Texas Christian University, USA [P1.002] Using surface grafted bottlebrushes to mimic lubrication in biological systems

K.S. Brooks*, J. Locklin, University of Georgia, USA [P1.003] Engineering ion-containing block copolymers for separations membranes

M.D. Green, Arizona State University, USA [P1.004] Dielectric magic in interpenetrating networks from ionic networks and silicone elastomers

S. Hvilsted*, L. Yu, A.L. Skov, Technical University of Denmark, Denmark [P1.005] Efficient synthesis of poly(methacrylic acid)-block-poly(styrene-alt-n-phenylmaleimide) diblock copolymer lamellae

using raft dispersion polymerization P-C. Yang*, L.P.D. Ratcliffe, O.O. Mykhaylyk, S.P. Armes, The University of Sheffield, UK

[P1.006] Zwitterion-grafted monodisperse poly(glycidyl methacrylate) microspheres to minimize nonspecific protein adsorption D. Horák*, J. Koubková, V. Proks, M. Trchová, Institute of Macromolecular Chemistry, Czech Republic

[P1.007] Original Routes Towards PHEMA-Based Materials with Bimodal Porosity P. Krajnc*1, M. Paljevac1, H.B. Ly2, B. Le Droumaguet2, D. Grande2, 1University of Maribor, Slovenia, 2C.N.R.S., France

[P1.008] UV-reduced graphene oxide nanocomposites M. Sangermano*1, R. Giardi2, S. Porro2, A. Chiolerio2, P. Fabbri3, L. Valentini4, 1Politecnico di torino, Italy, 2Istituto Italiano di Tencologia, Italy, 3Univeristà di Bologna, Italy, 4Università di Perugia, Italy

[P1.009] Nano-Patterned Thiol-Reactive Copolymer-Brushes Grafted from Polymeric Surfaces M. Dübner*1 ,2, T.N. Gevrek3, A. Sanyal3, N.D. Spencer2, C. Padeste1, 1Paul-Scherrer-Institut, Switzerland, 2ETH Zürich, Switzerland, 3Bogazici University, Turkey

[P1.010] Synthesis of sequence-defined topological polymers via combination of living anionic polymerization and hydrosilylation/”click chemistry” H. Ma*, Q. Wang, W. Sang, L. Han, P. Liu, Y. Li, Y. Wang, Dalian University of Technology, China

[P1.011] A difunctional antifouling coating based on modified acrylate copolymer F.Q. Wang*, H. Yang, W. Zhang, Technical Institute of Physics and Chemistry, China

[P1.012] Brush-hydrogels with graded and gradient-like properties: from organic to hybrid biomimetic coatings E. Dehghani*1, N.D. Spencer1, E.M. Benetti1 ,2, 1ETH, Switzerland, 2University of Twente, The Netherlands

[P1.013] Testing vesicles to destruction: SAXS and ESI-MS studies on block copolymer vesicles prepared via polymerization-induced self-assembly N.J. Warren*1, O.O. Mykhaylyk1, A.J. Ryan1, T. Doussineau2, P. Dugourd2, R. Antoine2, G. Portale3, S.P. Armes1, 1University of Sheffield, UK, 2Université de Lyon, France, 3ESRF, France

[P1.015] Sorption studies of methyl orange from chitosan and chitosan beads F.N.A. Allouche*, H. Lounici, Centre De Développement des Energies Renouvelables, Algeria

[P1.016] Elaboration and characterization of conducting pani/hy/tio2 nanocomposite applied for adsorption of chromium (vi) from aqueous solution Z. Ghebache*1, N. Djelali1, S. Zitouni1, 1Ecole Supérure du Matériel, El Harrach, BP 188 Beaulieu, Alger, Algerie, Algeria,

2Processing and Formatting Fibrous Polymers Laboratory (LTMFPF), Faculty of Engineering, University M'hamed Bougara, Boumerdes, Algeria, 3Macromolecular Chemistry Laboratory, Ecole Militaire Polytechnique, Bordj-El-Bahri City, 16111, PoBox 17, Algiers, Algeria, Algeria

[P1.017] Synthesis of core-shell nano-particulate polyelectrolyte D.J. Lin*, Y.P. Lu, Tamkang University, Taiwan

[P1.018] Functionalized and biodegradable polymers for an anticancer drug delivery system C. Ferris, M.V. de Paz*, E. Galbis, B. Begines, A. Alcudia, A. Aguilar-de-Leyva, I. Caraballo, J.A. Galbis, Universidad de Sevilla, Spain

[P1.019] PolyHEMA-based hydrogels: Tandem ATRP-Diels Alder procedure E. Galbis, M.V. de Paz*, C. Ferris, B. Begines, A. Alcudia, J.A. Galbis, Universidad de Sevilla, Spain

[P1.020] Cyclo-matrix-type polyphosphazene-colloids for flame retardancy applications D.C. Cortés Gómez*1, S. Kühl1, M. Möller1 ,2, A. Pich1 ,2, 1DWI – Leibniz-Institut für interaktive Materialien, Germany,

2RWTH Aachen University, Germany [P1.021] Monitoring photopolymerization through simultaneous measurement of fluorescence, conversion and mechanical


properties S. Medel1, P. Bosch*1, J.C. Liu2, P.K. Shah2, J.W. Stansbury2, 1ICTP-CSIC, Spain, 2University of Boulder, USA

[P1.022] New fluorescent films based on hyperbranched polymers as environmental sensors S. Medel1, P. Bosch*1, I. Grabchev2, M. Sangermano3, A. Incardona3, 1ICTP-CSIC, Spain, 2University of Sofia, Bulgaria,

3Politecnico di Torino, Italy [P1.023] Synthesis and rheological study of terpolymers as viscosity index improvers for automotive lubricant oils

A.P.L.R. Oliveira, R.G. Sousa, M.E.S.R. Silva, R.F.S. Freitas*, Federal University of Minas Gerais, Brazil [P1.024] Synthesis, characterization, and study of PLGA copolymer in vitro degradation

A.T.C.R. Silva, B.C.O. Cardoso, M.E.S.R. Silva, R.F.S. Freitas*, R.G. Sousa, UFMG, Brazil [P1.025] A direct arylation approach towards the synthesis of low band gap donor-acceptor type conjugated polymers

B. Sharma*, J. Jacob, Indian Institute of Technology Delhi, India [P1.026] Tailored thiol-functional polyamides: synthesis and characterization

S. Mommer*1, H. Keul1, M. Möller1, 1DWI - Leibniz-Institute for Interactive Materials, Germany, 2RWTH Aachen University, Germany

[P1.027] Synthesis, characterization and device studies on Azo based conjugated polymers S. Meena*, J. Jacob, Indian Institute of Technology Delhi, India

[P1.028] Phenylboronic acid group-connecting block-type phospholipid polymers for spontaneously forming hydrogels K. Ishihara*, S. Chantasirichot, Y. Inoue, The University of Tokyo, Japan

[P1.029] PLA/HA fibrous scaffold for bone tissue engineering N. Vargas-Becerril1, L. Téllez-Jurado2, J.L. Suarez-Franco1, M. Hipólito-García3, O. Alvarez-Fregoso3, M.A. Álvarez-Pérez*1, 1Laboratorio de Bioingeniería de Tejidos, Mexico, 2ESIQIE-IPN, Mexico, 3IIM, UNAM, Mexico

[P1.030] Synthesis and applications of functionalized syndiotactic polystyrene by half-sandwich scandium complex F. Guo*, Z. Shi, B. Wang, Z. Hou, Y. Li, Dalian University of Technology, China

[P1.031] Preparation and properties of poly (melamine-formaldehyde) microcapsules filled with epoxy resins S. Sharma*, V. Choudhary, Indian Institute of Technology Delhi, India

[P1.032] Optimization of the structure and exploration performances of perfluorinated membranes for fuel cells V.S. Likhomanov*, O.N. Primachenko, S.S. Ivanchev, Boreskov Institute of Catalysis SB RAS, Russia

[P1.033] Development of conjugated polymers for gas separation membranes M. Monga Mulunda*, F. Monnaie, W. Muhammad, I. Vankelecom, G. Koeckelberghs, KU Leuven, Belgium

[P1.034] The development of hybrid materials consisting of superparamagnetic nanoparticles and conjugated polymers for maximal Faraday rotation W. Ceunen*, T. Verbiest, G. Koeckelberghs, KU Leuven, Belgium

[P1.035] Development of alkaline anion exchange membranes bearing phosphonium groups V. Deimede*, A. Voege, P. Papakonstantinou, University of Patras, Greece

[P1.036] Rare-earth complexes bearing phosphinoamide ligands: structure and catalysis toward (co)polymerization of conjugated dienes T. Li*1, Z. Hou1 ,2, Y. Li1, 1Dalian University of Technology, China, 2RIKEN, Japan

[P1.037] Omnidispersible polymerized(ionic liquid)- cellulose nanofibrils hybrids K. Grygiel*1, B. Wicklein2, Q. Zhao1, M. Eder1, T. Pettersson3, L. Bergström2, M. Antonietti1, J. Yuan1, 1Max Planck Institute of Colloids and Interfaces, Germany, 2Stockholm University, Sweden, 3KTH Royal Institute of Technology, Sweden

[P1.038] Novel bio-derived polymerized ionic liquids K. Grygiel*, S. Kirchhecker, D. Esposito, M. Antonietti, J. Yuan, Max Planck Institute of Colloids and Interfaces, Germany

[P1.039] A modular concept for fabrication of externally switchable chromophoric boronate ester-hybrid materials N. Friebe*, A. Oehlke, K. Trommler, K. Schreiter, S. Spange, Technische Universität Chemnitz, Germany

[P1.040] Thermally cleavable imine base / isocyanate adducts - a new type of blocked isocyanates A. Laue*1, I. Polenz2, T. Uhrin1, S. Spange1, 1TU Chemnitz, Germany, 2Max-Planck Institute for Dynamics and Self-organization, Germany

[P1.041] Adjustable morphologies of inorganic/organic materials by using functional twin monomers containing polymerizable groups S. Oschatz*1, G. Cox2, A. Lange2, S. Csihony2, S. Spange1, 1Technische Universität Chemnitz, Germany, 2BASF SE, Germany

[P1.042] Ionic liquid catalyzed imine bases induced polymerization of acrylates (IBA) G. Thielemann*1, I. Polenz2, S. Spange1, 1Technische Universität Chemitz, Germany, 2Max Plank Institute of Dynamicy and Self-organization, Germany

[P1.043] Preparation of electrically conductive cellulose sheet by using solution plasma process P. Anantasattakul*, R. Rujiravanit, Chulalongkorn University, Thailand

[P1.044] Hierarchically structured carbon nanocomposites fabricated by twin polymerization on different templates for


application in Li/S-batteries T. Windberg*, T. Ebert, M. Birkner, S. Spange, Technische Universität Chemnitz, Germany

[P1.045] Cationicpolymerization of organic carbonates and borates for foam production L. Wöckel*1, J. Weißhuhn1, S. Csihony2, A. Seifert1, S. Spange1, 1Technische Universität Chemnitz, Germany, 2BASF SE, Germany

[P1.046] Boron oxide/silicon dioxide/phenol ether resin composite materials through alternating simultaneous twin polymerisation of organic borates and silicates J. Weißhuhn*1, A. Seifert1, S. Csihony2, S. Spange1, 1Technische Universität Chemnitz, Germany, 2BASF SE Ludwigshafen, Germany

[P1.047] Soft, thin mucin-like graft-copolymer adsorbates as new biolubricants for natural tissues G. Morgese*1, N.D. Spencer1, M. Zenoby-Wong1, E.M. Benetti1 ,2, 1ETH Zürich, Switzerland, 2University of Twente, The Netherlands

[P1.048] How processing affects dispersion and thermomechanical properties of waterborne epoxy and cellulose nanocrystal composites N. Girouard*1, G. Schueneman2, M.L. Shofner1, J.C. Meredith1, 1Georgia Institute of Technology, USA, 2Forest Products Laboratory, U.S. Forest Service, USA

[P1.049] Expanded natural nanotube reinforced chitosan hybrid hydrogels: novel approach on expansion of lumens S. Palantoken1, S. Sen2, T. Nugay*1, N. Nugay1, 1Bogazici University, Turkey, 2Yalova University, Turkey

[P1.050] Electro-Rheological behavior of hybrid materials with polymer matrix (PVB), a fractional calculus application F.Y. Rentería Baltiérrez*, M.E. Reyes Melo, Universidad Autónoma de Nuevo León, Mexico

[P1.051] Properties and applications of polyethylene-based ionomers K. Hausmann*, E.S. Thiele, DuPont Company, Switzerland

[P1.052] Curcumin polymers: nitroaromatic explosive sensor to biosensor B. Gogoi*, N. Sen Sarma, Institute of Advanced Study in Science and Technology, India

[P1.053] Model membranes at flat electrodes O. Squillace*, C. Esnault, G. Brotons, Institut des Molécules et des Matériaux du Mans, France

[P1.054] Interaction of targeted magnetoliposomes with cell models J. Estelrich1 ,2, M.C. Morán1 ,2, M.A. Busquets*1 ,2, 1University of Barcelona, Spain, 2Institute of Nanocience and Nanotechnology (IN2UB), Spain

[P1.055] Influence of lipid composition on magnetic resonance imaging J. Estelrich*1 ,2, M. Sangrà1, M.A. Busquets1 ,2, 1University of Barcelona, Spain, 2Institute of Nancience and Nanotechnology (IN2UB), Spain

[P1.056] Sustained release of antiseptic chlorhexidine digluconate from complex biopolymeric microparticles in simulated oral environment A.C.R.N. Barboza*1 ,2, F.B.T. Pessine1, V.L. Beraldo1, 1State University of Campinas, Brazil, 2The Dow Chemical Company, Brazil

[P1.057] Quantification of polymer-surface interaction using microcalorimetry L. Mohite, J. Sahu*, V. Juvekar, Indian Institute of Technology Bombay, Powai, Mumbai, India

[P1.058] Diffusion of polyelectrolytes in crowded media C. Dolce*1 ,2, G. Mériguet1 ,2, 1Sorbonne Universités UPMC, France, 2CNRS, France

[P1.059] The influence of graphene oxide in blending of low and ultra-high molar mas polymers and its implications on orientation and crystallization during flow D.H.M. Hermida-Merino*1, G.P. Portale1, W.B. Bras1, E.T. Troisi2, G.W.M.P. Peters2, E.A.R. Andablo-Reyes3, E.D.B. De Boer3, S.R. Rastogi3 ,4, 1DUBBLE @ ESRF, The Netherlands, 2Eindhoven University of Technology, The Netherlands,

3University of Loughborough, UK, 4Maastricht University, The Netherlands [P1.060] Double crystalline poly(butylene succinate-ran-butylene azelate) biobased isodimorphic copolymer

A. Mugica*1 ,2, I. Arandia1 ,2, M. Zubitur1, A. Arbe3, G. Liu4, D. Wang4, R. Mincheva5, P. Dubois5, A.J. Müller2 ,6, 1University of the Basque Country (UPV-EHU), Spain, 2Institute for Polymer Materials (POLYMAT), Spain, 3Materials Physics Center (CSIC-UPV/EHU), Spain, 4Chinese Academy of Sciences, China, 5University of Mons, Belgium, 6IKERBASQUE, Spain

[P1.061] The oxidation of phenylenediamines with ammonium peroxydisulfate under various acidity conditions M. Trchova*, Z. Moravkova, M. Blaha, J. Stejskal, Institute of Macromolecular Chemistry AS CR, Czech Republic

[P1.062] Polypyrrole nanotubes decorated with noble-metal nanoparticles and their carbonized analogues I. Sapurina1 ,2, J. Stejskal*1, I. Sdenkova1, M. Trchova1, 1Institute of Macromolecular Chemistry AS CR, Czech Republic,

2Institute of Macromolecular Compounds RAS, Russia [P1.063] Ultra-thin self-assembled protein-polymer membranes: A new pore forming strategy

A. Boker*, P. van Rijn, M. Tutus, C. Kathrein, N. Mougin, H. Park, C. Hein, M. Schurings, RWTH Aachen, Germany [P1.064] Synthesis and electrical characterization of a magnetic hybrid material with a polymer matrix of polyvinyl butyral


J.G. Puente Córdova*, M.E. Reyes Melo, Universidad Autónoma de Nuevo León, Mexico [P1.065] Emission enhancement in quantum-dot/polymer/gold nanoparticle assemblies

F. Burns2, T. Ribeiro1, M. Moffitt2, J.P.S. Farinha*1, 1University of Lisbon, Portugal, 2University of Victoria, Canada [P1.066] The investigation of force-induced conformation transition of polyphenylacetylene and its derivatives in different

solvents by using single-molecule force spectroscopy X. Li*, W. Zhang, Jilin University, China

[P1.067] Development of natural rubber matrix using in electrical stimuli transdermal drug delivery application S. Choowongapichat*, A. Sirivat, Chulalongkorn University, Thailand

[P1.068] Poly(p-phenylene)/ZSM-5 zeolite composites as CO and SO2 sensing materials P. Choeichom*, A. Sirivat, Chulalongkorn University, Thailand

[P1.069] Development of sulfonated polysulfone/zeolite Y composite membranes for direct methanol fuel cell P. Bunlengsuwan*, M. Pianmanakij, S. Changkhamchom, A. Sirivat, K. Siemanond, Chulalongkorn University, Thailand

[P1.070] Electrical responsive material based polycarbazole and alginate bio-composite hydrogel as an actuator W. Sangwan*, A. Sirivat, Chulalongkorn University, Thailand

[P1.071] Hydrolytic degradation of a bionanocomposite based on poly(L-lactic acid) and a drug modified layered double hydroxide M. Zubitur*1, A. Oyarzabal1 ,2, A. Mugica1 ,2, A.J. Müller2 ,3, 1University of the Basque Country (UPV/EHU), Spain, 2Institute for Polymer Materials (POLYMAT), Spain, 3IKERBASQUE, Basque Foundation for Science, Spain

[P1.072] Synthesis and characterization of a new crosslinked poly(arylene ether sulfone) sulfonated polymer to be used as proton exchange membrane (PEM) in Fuel Cells J.C. Souza, A.L.A. Simões, J.C. Oliveira, L.E.G. Pereira, R.G. Sousa, R.F.S. Freitas, M.E.S.R. Silva*, Federal University of Minas Gerais, Brazil

[P1.073] Physicochemical characterization and lifetime estimation of polyethylene additivated with pro-degradant agent. C.D.C. Erbetta, R.C.S. Azevedo, A.S. Castro, M.E.S.R. Silva*, R.F.S. Freitas, R.G. Sousa, UFMG, Brazil

[P1.074] Room temperature detection of formaldehyde gas using conducting polymer-functionalized graphene oxide nanocomposites B.C. Moon, M.C. Jang, Y. Kim*, Inje University, Republic of Korea

[P1.075] Microstructure and nonlinear signatures of yielding in a polymer mediated colloidal gel under large amplitude oscillatory shear J. Kim1, D. Merger*2, M. Wilhelm2, M.E. Helgeson1, 1University of California Santa Barbara, USA, 2Karlsruhe Institute of Technology, Germany

[P1.076] UV light activated shape memory of spiropyran doped ethylene-vinyl acetate copolymers H. Liu*, X. Zhang, University of Science and Technology of China, China

[P1.077] Synthesis and characterization of dendronized polymers by divergent approach M.R. Schmidt1, L.K. Alegría2, A.R. Leiva1, D.D. Radic*1, 1Pontificia Universidad Católica de Chile, Chile, 2Universidad Austral de Chile, Chile

[P1.078] Exploring the wetting properties of block copolymer brushes on Au substrates synthesized via RAFT N. Politakos*, S. Moya, CIC biomaGUNE, Spain

[P1.079] Melting behaviour and rigid amorphous fraction in semi-crystalline polymers M.C. Righetti*, M.L. Di Lorenzo, Consiglio Nazionale delle Ricerche, Italy

[P1.080] Polydopamine films from the air/water interphase: towards new polydopamine-polymer composite F. Ponzio*1, P. Payamyar2, A. Schneider1, M. Winterhalter3, J. Bour4, F. Addiego4, M-P. Krafft5, J. Hemmerle1, V. Ball1, 1Institut national de la santé et de la recherhche médicale, France, 2ETH Zurich, Switzerland, 3Jacobs University Bremen, Germany, 4Centre de Recherche Public Henri Tudor, Luxembourg, 5Institut Charles Sadron Strasbourg, France

[P1.081] Fabrication strong and tough nanocomposite using a novel core-shell nanofiller C.B. He1 ,2, X.S. Fan2, C.C. Yeo1, W. Thitsartarn*1, 1Institute of Materials Research and Engineering, A*STAR, Singapore,

2National University of Singapore, Singapore [P1.082] Preparation of high internal water phase double emulsions stabilized by a single anionic surfactant for fabricating

interconnecting porous polymer microspheres Z.C. Li, H.R. Liu*, H.W. Liu, Y.M. Wang, Y. Xie, University of Science and Technology of China, China

[P1.083] Dielectric relaxation behavior of polar guest molecules confined in the nanosized cavity of syndiotactic polystyrene H. Kobayashi*, S. Akazawa, O. Urakawa, F. Kaneko, S. Yamanaka, M. Okumura, T. Inoue, Osaka University, Japan

[P1.084] 2nd generation PMMA nanocomposites based on tailored synthetic clay: thermal, rheological and mechanical properties B. Fischer, M. Ziadeh, J. Breu, V. Altstädt*, University of Bayreuth, Germany

[P1.085] Dielectric relaxation and AC conductivity of PVA- CdS nanocomposites polymer films S. Mahrous*, T. abdel-maguid, G. khabiri, Fayoum University, Egypt


[P1.086] Effects of plasma treatments on polyethylene terephthalate track membrane S. Maletic*1, D. Cerovic1 ,2, J. Dojcilovic1, D. Popovic1, 1University of Belgrade, Serbia, 2The College of Textile Design, Serbia

[P1.087] Modification of the dielectric and optical properties of PET track membrane by N5+ ion irradiation S. Maletic*1, D. Cerovic2, J. Dojcilovic1, S. Korica3, M. Siljegovic3, 1University of Belgrade, Serbia, 2The College of Textile Design, Serbia, 3Vinca Institute of Nuclear Sciences, Serbia

[P1.088] Mechanically tuning of the shape and controlling the motion of the droplet on a patterned elastic surface D. Wang1, G. McHale1, H. Kusumaatmaja2, D. Wood2, M. Cooke2, B. Xu*1, 1Northumbria University, UK, 2Durham University, UK

[P1.089] Plasmonic gold nanoparticle arrays in organic photovoltaic devices controlled by block copolymer solvent annealing S.M. Jo*, S.J. Go, G.S. HWANG, B.D. CHIN, Dankook University, Republic of Korea

[P1.090] Synthesis, processing, and performance of aromatic-aliphatic thermotropic polyesters based on vanillic acid C.H.R.M. Wilsens1 ,2, Y.S. Deshmukh*1, W. Liu3, B.A.J. Noordover4, Y. Yao3, H.E.H. Meijer4, S. Rastogi1 ,5, 1Maastricht University, The Netherlands, 2Dutch Polymer Institute, The Netherlands, 3East China Normal University, China, 4Eindhoven University of Technology, The Netherlands, 5Loughborough University, UK

[P1.091] Nucleating ability of oxalamide compounds and their effect on processing and performance of synthetic and bio-based polymers Y.S. Deshmukh*, C.H.R.M. Wilsens, N. Leoné, K.V. Bernaerts, J.A.W. Harings, D. Auhl, S. Rastogi, Maastricht University, The Netherlands

[P1.092] Thermal and electrical characterization of composites (1-x)[(PEO)10CF3COONa]x(Al2O3) N.M. Jurado*1, M.I. Delgado1, J.A. Cardona1, R. Uribe1, R.A. Vargas1, 1Universidad del Tolima, Colombia, 2Unviersidad del Valle, Colombia

[P1.093] Kinetics of nucleation and crystallization of polymer - multiwalled carbon nanotube composites E. Zhuravlev*1, R. Androsch2, P. Pötschke3, J.W.P. Schmelzer1, C. Schick1, 1University of Rostock, Germany, 2Martin-Luther-University Halle-Wittenberg, Germany, 3Leibniz Institute of Polymer Research Dresden, Germany

[P1.094] Experimental test of Tammann's nuclei development approach in crystallization of macromolecules E. Zhuravlev1, J.W.P. Schmelzer1, A.S. Abyzov2, V.M. Vokin3, R. Androsch4, C. Schick*1, 1University of Rostock, Germany,

2Kharkov Institute of Physics and Technology, Ukraine, 3Vavilov State Optical Institute St. Petersburg, Russia, 4Martin-Luther-University Halle-Wittenberg, Germany

[P1.095] Mechanisms of production of polymeric nanofibrous materials by electroblowing M. Pokorny*1, V. Rassushin2, L. Wolfova1, V. Velebny1, 1Contipro Biotech s.r.o., Czech Republic, 2National Research Centre, Russia

[P1.096] Time-dependent conformational changes in PVK electrosprayed particles and electrospun fibers J.U. Balderas*1, C. Falcony1, M. Mondragón2, 1CINVESTAV, Mexico, 2IPN-ESIME Azcapotzalco, Mexico

[P1.097] Low-temperature annealed OLEDs based on a poly (p-phenylenethynylene) and its nanocomposites with halloysite nanotubes G.L. Jiménez1, J.U. Balderas*1, M. Mondragón1, 1IPN-ESIME Azcapotzalco, Mexico, 2CINVESTAV, Mexico

[P1.098] Transparent, water-resistant hybrid nanopaper M. Toivonen*, S. Kurki-Suonio, J. Laine, O. Ikkala, Aalto University, Finland

[P1.099] Structural and vibrational studies in ionic polymer composites PEO:CF3COONa:AL2O3. M.I. Delgado*1, N.M. Jurado1, J.A. Cardona1, R. Uribe1, M. Melendez Lira1 ,2, 1Universidad del Tolima, Colombia, 2Centro de Investigación y de Estudios Avanzados del Instituto Politécnico Nacional., Mexico

[P1.100] Study of multilayer’s electromagnetic shielding of conductive polymers: case of oblique incidence S.M. Benhamou*, M. Hamouni, University of Tlemcen, Algeria

[P1.101] PVDF polymorphs: crystal structure determination through vibrational spectroscopy and DFT calculations S. Radice1, A. Milani*2, C. Castiglioni2, 1Solvay Specialty Polymers, Italy, 2Politecnico di Milano, Italy

[P1.102] Polymorphism and IR spectroscopy of polyesters from periodic first-principles calculations: PTT, PBT and PBN A. Milani*, D.R. Galimberti, C. Castiglioni, Politecnico di Milano, Italy

[P1.103] The effect of size, grafted density and dispersion of silica nanoparticle on the interfacial property and mechanical behavior of polystyrene/silica nanocomposites: a coarse grain molecular dynamics study S.Y. Liu*, M.C. Böhm, F. Müller-Plathe, Technical University Darmstadt, Germany

[P1.104] Pressure dependent slip in slit flow: implications for rheometry F. Mollica*, V. Mazzanti, Università di Ferrara, Italy

[P1.105] Single chain in mean field theory and its application to semi-flexible chain systems J. Tang1, X. Zhang2, D. Yan*3, 1Chinese Academy of Sciences, China, 2Beijing Jiaotong University, China, 3Beijing Normal University, China

[P1.106] Thermodynamics of linear and star polymers at fluid interfaces T. Taddese*1, P. Carbone1, D.L. Cheung2, 1University of Manchester, UK, 2University of Strathclyde, UK


[P1.107] Fabrication and in vivo application of bilayer bioadhesive collagen sheet for accelerated wound healing J.M.M. Islam1 ,2, A.B. Siddik2, A. Rahman2, W. Kabir2, M. Mizan2, M.I.H. Khan2, M.A. Khan*1, 1Institute of Radiation and Polymer Technology, Bangladesh, 2Incepta Pharmaceutical Limited, Bangladesh

[P1.108] Preparation of cellulose nano crystal reinforced biopolymer composites J.M.M. Islam, A. Hossain, M.A. Khan*, Institute of Radiation and Polymer Technology, Bangladesh

[P1.109] Sodium periodate oxidized CGP/PVA film as carrier for immobilization of trypsin K.A. Batista*, B.R. Moreira, K.F. Fernandes, Universidade Federal de Goiás, Brazil

[P1.110] Stimuli-responsive polymer produced by blending cashew gum polysaccharide and polyvinyl-alcohol K.F. Fernandes*, K.A. Batista, B.R. Moreira, F.E.F. Silva, Universidade Federal de Goiás, Brazil

[P1.111] Calamus deerratus fibre reinforced natural rubber vulcanizates E. Osabohien, B.E. Okoh, S.H.O. Egboh*, Delta State University, Abraka, Nigeria

[P1.112] Compatibility of sealing materials with biofuels, biodiesel heating oil blends and premium grade fuel at different temperatures M. Weltschev*, J. Werner, M. Haufe, M. Heyer, Federal Institute for Materials Research and Testing (BAM), Germany

[P1.113] Polymers in hybrid systems with gypsum M. Mucha*, P. Mróz, J. Mucha, Technical University of Łódź, Poland

[P1.114] Limiting factors in synthesis of enantiopure high molecular weight polylactic acid by direct condensation J.M. Raase*, R. Schomäcker, TU Berlin, Germany

[P1.115] Chemically sensitive SEC detection based on IR spectroscopy J. Kübel*1, T. Beskers1 ,2, P. Montag2, T. Hofe2, M. Wilhelm1, 1Karlsruhe Institute of Technology, Germany, 2PSS Polymer Standards Service GmbH, Germany

[P1.116] Polymers for waterborne pathogen monitoring H.L. Bridle*1, P. Pavli1, S. Venkateswaran2, M. Bradley2, M. Ghosh3, 1Heriot-Watt University, UK, 2University of Edinburgh, UK, 3Thapar University, India

[P1.117] Effect of compatibilizer on the mechanical properties of biodegradable triplet polymer LLDPE / HDPE/ Starch S. Tabashi*, A. Oromiehie, Islamic Azad University, Iran

[P1.118] New crosslinking diluents for dental materials N. Moszner*, J. Angermann, U. Fischer, Ivoclar Vivadent AG, Liechtenstein

[P1.119] From a water-immiscible monomer to block copolymer nano-objects via a one-pot RAFT aqueous dispersion polymerization formulation L.P.D. Ratcliffe*, S.P. Armes, A.J. Ryan, The University of Sheffield, UK

[P1.120] RAFT polymerization of hydroxy-functional methacrylic monomers under heterogeneous conditions: effect of varying the core-forming block L.P.D. Ratcliffe*1, A. Blanazs1 ,3, C.N. Williams1 ,2, S.L. Brown1 ,2, S.P. Armes1, 1The University of Sheffield, UK, 2Scott Bader Company Limited, UK, 3BASF SE, Germany

[P1.121] Chemical characterization of polymer composite materials using nanoscale infrared spectroscopy and imaging C. Marcott*1 ,2, A. Dazzi3, E. Dillon4, K. Kjoller4, C. Prater4, R. Shetty4, 1University of Delaware, USA, 2Light Light Solutions, USA, 3Université Paris-Sud, France, 4Anasys Instruments, USA

[P1.122] Investigation of molecular structure and orientation in thin films and electrospun nanofibers of poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyhexanoate] (PHBHx) using AFM-IR spectroscopy and imaging techniques C. Marcott*1, L. Gong1, D.B. Chase1, I. Noda1, A. Dazzi2, C.J. McBrin1, J.F. Rabolt1, 1University of Delaware, USA,

2Université Paris-Sud, France [P1.123] Nanocomposition and chain extension of polyamide-6

B. Tuna*, H. Benkreira, University of Bradford, UK [P1.124] Properties of a Biodegradable Hydrogel for Biomedical Applications

E. Jalalvandi*, S.C. Moratti, L.R. Hanton, otago university, New Zealand [P1.125] Designing nitrogen functionalities on polymer by plasma ion implantation for inducing BMSCs osteogenic

differentiation W. Zhang*, K. Yang, H.G. Shi, J. Liu, F.Q. Wang, J.H. Ji, Chinese Academy of Sciences, China

[P1.126] Surface modified polymers for photochromic activity S. Chng*1 ,2, L.Y.L. Wu2, M.G. Moloney1, 1University of Oxford, UK, 2Singapore Institute of Manufacturing Technology (SIMTech), Singapore

[P1.127] Antibacterial and protein repelling clay nanotube-silicone composites C.J. Boyer*, J. Ambrose, S. Das, A. Humayun, W.C. Chastant, D. Chappidi, D.K. Mills, Louisiana Tech University, USA

[P1.128] Antimicrobial effect of surface-immobilized quaternary ammonium compounds on a polyurethane substrate M. Gabriel*1, C-F. Vahl2, 1Qatar Cardiovascular Research Center, Qatar, 2Johannes Gutenberg University, Germany

[P1.129] Effect of the chemical structure and processing conditions on the morphology and electrical conductivity of TPU/EG


composites J. Pionteck*1, F. Piana1, 1Leibniz Institute of Polymer Research Dresden, Germany, 2Institute of Macromolecular Chemistry, Czech Republic

[P1.130] Nucleation and clarification effects on polyolefins of organic additives extracted from natural plants M.L. Santarelli*, M.P. Bracciale, A. Broggi, F. Sbardella, Università di Roma Sapienza, Italy

[P1.131] Analysis of polymeric nanofibrous layers by confocal Raman microscopy A. Kotzianova*1 ,2, J. Rebicek1, M. Pokorny1, J. Hrbac2 ,3, V. Velebny1, 1Contipro Biotech s.r.o., Czech Republic, 2Palacky University in Olomouc, Czech Republic, 3Masaryk University, Czech Republic

[P1.132] Development of an in – line rheometer for wood polymer composites V. Mazzanti*, A. Dimarco, F. Mollica, Università di Ferrara, Italy

[P1.133] Nanocomposites of A-B Diblock copolymers and B′-type nanoparticles: Effect of copolymer composition and nanoparticle shape on thin film structure A. Halevi1, S. Halivni1, M. Oded1, A.H.E. Mueller2, U. Banin1, R. Shenhar*1, 1Hebrew University of Jerusalem, Israel, 2Mainz University, Germany

[P1.134] Hierarchical structures of polystyrene-block-poly(2-vinylpyridine) and palladium-pincer surfactants: Effect of weak surfactant-polymer interactions on the morphological behavior I. Davidi1, D. Patra2, D. Hermida-Merino3, G. Portale3, V.M. Rotello2, U. Raviv1, R. Shenhar*1, 1Hebrew University of Jerusalem, Israel, 2University of Massachusetts - Amherst, USA, 3ESRF, France

[P1.135] Characterization of structure and mechanical properties of gelatin-chitosan edible films with plasticizers F. Palma1, B. Michniak-Kohn2, J.R. Pérez-Correa1, E. Hernández3, R.J. Romañach3, L.M. Valenzuela*1, 1Pontificia Universidad Católica de Chile, Chile, 2The State University of New Jersey, USA, 3University of Puerto Rico, Puerto Rico

[P1.136] The investigation of force-induced conformation transition of polyphenylacetylene and its derivatives in different solvents by using single-molecule force spectroscopy W. Deachophon*, H. Manuspiya, Chulalongkorn University, Thailand

[P1.137] The interface adhesion strength between polymer SU-8 photoresist and metal substrate under ultrasonic treatment L.Q. Du*, X-L. Zhang, C. Song, Dalian University of Technology, China

[P1.138] Effect of poly (ethylene glycol) on thermal and mechanical properties of PLA/PEG biodegradable blends R. Nehra, S.N. Maiti, J. Jacob, R. Kumar*, Indian Institute of Technology Delhi, India

[P1.139] An integrated approach to characterize the fine structure of a novel hyperbranched natural biopolymer from mushroom by use of chemical, chromatographic, microscopic and spectroscopic methods L. Chen, P.C.K. Cheung*, The Chinese University of Hong Kong, China

[P1.140] Parameters of endothelial function are altered by polymeric stent surface materials A. Strohbach*1, S. Petersen2, K. Sternberg3, S.B. Felix1, R. Busch1, 1University of Greifswald, Germany, 2University of Rostock, Germany, 3Aesculap AG, Germany

[P1.141] Cancer cell-death induced by intracellular self-assembly of a supramolecular gelator T. Maruyama*1, A. Tanaka1, Y. Fukuoka1, T. Honjo1, D. Koda2, M. Goto2, 1Kobe University, Japan, 2Kyushu University, Japan

[P1.142] Single-plane micro-droplets driving chips with composite polymer film W. Li, W.P. Yan*, X.Y. Wang, Z.A. Tang, Dalian University of Technology, China

[P1.143] Solubilization of proteins in organic solvents using polymerizable surfactants C. Higashi*, Y. Funasaki, T. Maruyama, Kobe University, Japan

[P1.144] Hydrogel composed of DNA-gold nanoparticle network prepared by polymerase chain reaction Y. Eguchi*, T. Kato, T. Tanaka, T. Maruyama, Kobe university, Japan

[P1.145] Peptide-based supramolecular hydrogelators and its application to in-situ synthesis of a supramolecular gelator Y. Nishida*, A. Tanaka, T. Maruyama, Kobe university, Japan

[P1.146] Simple and versatile well-defined surface modification using a photoreactive ATRP initiator K. Ishihara, K. Fukazawa*, The University of Tokyo, Japan

[P1.147] Hierarchical structure of polysaccharides-peptides hybrids G. Ochbaum*, O. Levi, R. Bitton, Ben-Gurion University of the Negev, Israel

[P1.148] The use of poly(2-oxazoline)s as matrix excipient for solid dispersions M. Vergaelen*, B.D. Monnery, B. Claeys, J.P. Remon, B.G. De Geest, R. Hoogenboom, Ghent Universtiy, Belgium

[P1.149] Influence of extremely polar solvents on the cationic ring-opening polymerization of 2-methyl-2-oxazoline, 2-ethyl-2-oxazoline and 2-phenyl-2-oxazoline M. Vergaelen*, B.D. Monnery, R. Hoogenboom, Ghent University, Belgium

[P1.150] A powerful strategy for the patterning of polymer brushes: direct and remote photocatalytic lithography G. Panzarasa*1, G. Soliveri2, S. Ardizzone2, K. Sparnacci1, 1Università del Piemonte Orientale "Amedeo Avogadro", Italy,


2Università degli Studi di Milano, Italy [P1.151] Investigation of large amplitude oscillatory shear on diblock copolymer morphology

M. Heck*1, L. Schneider2, M. Müller2, M. Wilhelm1, 1Karlsruhe Institute of Technology, Germany, 2Georg-August University Göttingen, Germany

[P1.152] Epoxy-carbon nanotube composite as anticorrosion coatings materials M. Bahattab*1, M. Jafri2, Z. Siarhei3, K. Andrei3, 1King Abdulaziz City for Science & Technology (KACST), Saudi Arabia,

2Saudi Standards, Metrology and Quality Organization (SASO), Saudi Arabia, 3Chemical Physics Technologies, Belarus [P1.153] Properties of polypyrrole-coated textiles

C. Vineis*1, A. Varesano1, C. Tonetti1, G. Mazzuchetti1, V. Bobba2, 1CNR-ISMAC, Italy, 2Yanga S.r.l., Italy [P1.154] Nanogels as carriers for transdermal and dermal drug delivery

F. Rancan*1, S. Dogan1, J. Jurisch1, M. Asadian-Birjand2, M. Giulbudagian2, C. Graf2, U. Blume-Peytavi1, M. Calderon2, A. Vogt1, 1Charité - Universitätsmedizin Berlin, Germany, 2Freie Universität Berlin, Germany

[P1.155] Polystyrene particles from expanded polystyrene-limonene system using non-solvent induced precipitation M. Satish Chandra Hari*, V. Susy, Indian Institute of Technology, Madras, India

[P1.156] Polymeric matrices based on 2-hydroxyethyl acrylate and itaconic acid for potential applications in tissue regeneration M. Babic, J. Filipovic, S. Tomic*, University of Belgrade, Serbia

[P1.157] Pharmaceutical polymers for the manufacturing of a capsular delivery platform by injection molding L. Zema, A. Melocchi*, G. Loreti, F. Casati, A. Maroni, A. Gazzaniga, Università degli Studi di Milano, Italy

[P1.158] Nano-force analysis between proteins and well-characterized polymer brush surfaces to elucidate protein adsorption behaviors Y.I. Inoue*, S.S. Sakata, K.I. Ishihara, The University of Tokyo, Japan

[P1.159] Crosslinked and responsive polymersomes: tailoring the pH-value response H. Gumz*1 ,2, D. Appelhans1, B. Voit1 ,2, 1Leibniz-Institut für Polymerforschung Dresden e.V., Germany, 2Technische Universität Dresden und Center for Advancing Electronics Dresden, Germany

[P1.160] Infrared thermography to evaluate carbon/epoxy composites C. Meola*, S. Boccardi, G.M. Carlomagno, N.D. Boffa, F. Ricci, University of Naples Federico II, Italy

[P1.161] Characterization of PLA/jute composites with infrared thermography C. Meola*1, S. Boccardi1, G.M. Carlomagno1, G. Simeoli1, P. Russo2, 1University of Naples Federico II, Italy, 2National Council of Research, Italy

[P1.162] Development of novel nanocellular biopolymer composites: structure and properties. V. Topolkaraev*, R. McEneany, N. Scholl, A. Carrillo, T. Eby, H. Hristov, Kimberly-Clark Corporation, USA

[P1.163] 2BFUNTEX: Functional polymers for functional textile structures A. Varesano*1, C. Vineis1, P. Kiekens2, E. Van der Burght2, 1CNR-ISMAC, Italy, 2Ghent University, Belgium

[P1.164] Water-insoluble keratin nanofibres by electrospinning from water solutions A. Varesano*, C. Vineis, C. Tonetti, D.O. Sánchez Ramírez, G. Mazzuchetti, CNR-ISMAC,National Research Council of Italy, Italy

[P1.165] Thermoplastic elastomers based on polypropylene/polystyrene grafted natural rubber (PP/NR-g-PS) and dynamic vulcanizate O. Egharevba*1, S.K. Ong2, F.E. Okieimen3, U.N. Okwu1, D.E. Ogbeifun3, 1Rubber Research Institute of Nigeria, Nigeria,

2Universiti Kuala Lumpur, Malaysia, 3University of Benin, Nigeria [P1.166] Energy transfer between F8BT polymer and photosynthetic LH2 complex.

K. Smolarek*1, D. Buczynska1, I.D.W. Samuel2, R.J. Cogdell3, S. Mackowski1, 1Nicolaus Copernicus University, Poland,

2University of St Andrews, UK, 3University of Glasgow, UK [P1.168] Rubber toughened poly(lactic acid) nanocomposites

T. Baouz*1, F. Rezgui1, U. Yilmazer2, 1University of Bejaia, Algeria, 2Middle East Technical University-Ankara, Turkey [P1.169] An electric generator using a lotus leaf-like surface

J.W. Ha*1, S.M. Kim2, J.B. Kim1, 1Korea Advanced Institute of Science and Technology (KAIST), Republic of Korea,

2Samsung Advanced Institute of Technology (SAIT), Republic of Korea [P1.170] Fabrication of dually functionalized surfaces on au substrates using si-containing negative photoresists

S.Y. Choi*, S.A. Woo, J.B. Kim, Korea Advanced Institute of Science and Technology (KAIST), Republic of Korea [P1.171] Fabrication of dually functionalized patterns on a gold surface via inkless micro-contact printing

S.M. Shin*, S.Y. Choi, J-B. Kim, Korea Advanced Institute of Science and Technology (KAIST), Republic of Korea [P1.172] Fabrication of functional nanostructure arrays using dually responsive block copolymer templates

K.O. Jung*, C.H. Bak, G.C. Jo, J.B. Kim, Korea Advanced Institute of Science and Technology, Republic of Korea [P1.173] Fabrication of highly active cone-shaped nanoporous gold SERS substrates via nanosphere lithography

G.C. Jo*, J-B. Kim, Korea Advanced Institute of Science and Technology (KAIST), Republic of Korea


[P1.174] Conservation of environment by using TTEGDA-crosslinked acrylicacid-n-vinyl pyrrolidone copolymeric hydrogel in water purification treatment M.G. Gigimol*, K.R. Dhanya, Alphonsa College Pala, India

[P1.175] Novel polymeric materials and their applications as adsorbents for hazardous dyes M.G. Gigimol*, K.R. Dhanya, Alhonsa College, India

[P1.176] Transport of indomethacin from genipin cross-linked chitosan-gelatin composite hydrogels A.S. Goyal, D. Divya, R. Kamath, G. Thakur*, Manipal University, India

[P1.177] Polyion complex micelle based on albumin-polymer conjugates: multifunctional oligonucleotide transfection vectors for anticancer chemotherapeutics Y. Jiang*, M. Stenzel, University of New South Wales, Australia

[P1.178] Biodegradable albumin-polycaprolactone hybrid micelle as a promising drug carriers for prostate carcinoma therapy Y. Jiang*, M. Stenzel, University of New South Wales, Australia

[P1.179] Synthesis and characterization of new superabsorbent polymer prepared by bio-based carboxylic acid vinyl monomer with different amount of crosslinking agent. J.H. Jang*1, D.G. Jeon1, J.S. Kim1, Y.W. Chang2, N.H. Park1, D.H. Kim1, 1Korea Institute of Industrial Technology (KITECH), Republic of Korea, 2Hanyang University, Republic of Korea

[P1.180] Synthesis and characterization of the new superabsorbent polymer prepared by bio-based vinyl monomer according to degree of neutralization. J.S. Kim*, D.G. Jeon, J.H. Jang, N.H. Park, D.H. Kim, Korea Institute of Industrial Technology, Republic of Korea

[P1.181] Preparation and characterization of superabsorbent polymerbased on carboxylic acid monomers D.G. Jeon*1, J.S. Kim1, J.H. Jang1, Y.W. Chang2, N.H. Park1, D.H. Kim1, 1Korea Institute of Industrial Technology (KITECH), Republic of Korea, 2Hanyang University, Republic of Korea

[P1.182] Thermal, morphological and mechanical properties of poly(lactic acid)/lignin bio-degradable blends R. Kumar*, S.N. Maiti, A.K. Ghosh, Indian Institute of Technology Delhi, India

[P1.183] Naphthalene diimides polymeric materials F. Chagas-Silva1, E.R. Triboni1, F.H. Florenzano*3, M.J. Politi1, L.F. Gomes1, I. Vasconcelos1, F. Palacios1, J.R. Perez1, 1Universidade Federal de Alfenas, Brazil, 2Escola de Engenharia de Lorena, Brazil, 3Universidade de São Paulo, Brazil,

4Faculdades de Ciências Farmacêuticas, USP, Brazil, 5Instituto de Física, USP, Brazil [P1.184] Effect of preparation methods and their parameters on porous poly(ε-caprolactone)scaffold architecture

M. Dziadek*, B. Zagrajczuk, J. Pawlik, K. Cholewa-Kowalska, AGH University of Science and Technology, Poland [P1.185] Effect of ceramic filler addition on physicochemical properties of poly(ε-caprolactone)

M. Dziadek*, B. Zagrajczuk, J. Pawlik, K. Cholewa-Kowalska, AGH University of Science and Technology, Poland [P1.186] Structure formation and functional analysis of polymer composite interfaces by integrated gold nanoparticles

A.C. Zimmerer*1, G. Heinrich2, G. Steiner3, 1Leibniz Institute of Polymer Research Dresden e.V., Germany, 2Dresden Technical University, Polymer Materials and Rubber Technology, Germany, 3Dresden Technical University, Clinical Sensoring and Monitoring, Germany

[P1.188] Micelles and vesicles from amphiphilic homopolymers M. Changez1, N-G. Kang2, M. Luqman*1, A.I. Yahya1, J-S. Lee3, 1A’Sharqiyah University, Oman, 2University of Tennessee, USA, 3Gwangju Institute of Science and Technology, Republic of Korea

[P1.189] Development of polyhydroxyalkanoate based biodegradable polymers with different physical-mechanical properties A.N. Boyandin*1 ,2, N.O. Zhila1 ,2, E.G. Kiselev1 ,2, T.G. Volova1 ,2, 1Institute of Biophysics of Siberian Branch of Russian Academy of Sciences, Russia, 2Siberian Federal University, Russia

[P1.190] Granular activated carbon anchored with poly ionic liquids for sulfate removal P. HOU*1 ,2, R. Wang1, F.S. CANNON2, 1China University of Mining and Technology at Beijing, China, 2Pennsylvania State University, USA

[P1.191] Phase transformations and electro-optic characteristics of polymer network liquid crystals T.D. Ibragimov*, A.R. Imamaliyev, G.M. Bayramov, Azerbaijan National Academy of Sciences, Azerbaijan

[P1.192] Effect of swelling in osmotic pressure solutions on the properties of PVA/PVP hydrogels as artificial articular cartilage Y. Shi*, D.S. Xiong, Nanjing University of Science and Technology, China

[P1.193] Electrochemical investigation of homo- and copolymer functional brushes obtained by SI-ATRP G. Panzarasa*1, V. Pifferi2, K. Sparnacci1, L. Falciola2, 1Università del Piemonte Orientale "Amedeo Avogadro", Alessandria, Italy, 2Università degli Studi di Milano, Milano, Italy

[P1.194] Studies on trogamid/epdm-g-ma/nanoclay nanocomposites: morphological, thermal and mechanical properties A. GARHWAL*, S.N. MAITI, Indian institute of technology, Delhi, India

[P1.195] Monolayers based on crown-ether derivative and polymer for mercury cations detection S.Y. Zaitsev*, M.S. Tsarkova, I.S. Zaitsev, Moscow State Academy of Veterinary Medicine and Biotechnology,109472, Moscow, Russia


[P1.196] Polymer-protein systems as promising nanomaterials S.Y. Zaitsev, Moscow State Academy of Veterinary Medicine and Biotechnology,109472, Moscow,, Russia

Poster Session 2

Thursday, 21 May 2015 at 10:40-12:10 and 18:10-20:00

[P2.001] Low-wear and bio passive polymer brushes: new layered polymer architectures by surface-initiated polymerizations M. Divandari*, N.D. Spencer, E.M. Benetti, ETH Zurich, Switzerland

[P2.002] Surfactant polymerization in a solution of amphiphilic monomers and oppositely charged polyelectrolytes P.A. Fetin*, I.M. Zorin, A.A. Lezov, A.Y. Bilibin, Saint Petersburg State University, Russia

[P2.003] pH-Responsive polymeric cagelike microspheres through γ-ray radiation induced raft grafting polymerization H.Q. Weng, M.Z. Wang*, X.W. Ge, University of Science and Technology of China, China

[P2.004] The construction of recycled inverse opal ptfe film by self-assembly and gamma-ray-radiation-induced graft polymerization method Y.L. Wang, M.Z. Wang, X.W. Ge*, University of Science and Technology of China, China

[P2.005] Stimuli-responsive helical polymers K. Liu, A. Xu, F. Wang, W. Li, A. Zhang*, Shanghai University, China

[P2.007] Chemometric analysis of oligomers synthesised using an in-situ cobalt catalyst S.J. Richardson*1, I. Blakey1, K.J. Thurecht1, M. Pfrunder1, J.K. Clegg1, D.J. Irvine2, K. Adlington2, A.K. Whittaker1, 1The University of Queensland, Australia, 2The University of Nottingham, UK

[P2.008] Synthesis of defect-free, hyperbranched graft polymers via graft-through method by radical polymerization Y. Ohta*, J. Matsuda, S. Narumi, H. Yamaguchi, T. Yokozawa, Kanagawa University, Japan

[P2.009] Synthesis of cerium oxide using poly(diallyl dimethyl ammonium chloraide) and poly(acrylic acid) for photo-catalytic application J. Chavalitkul*, S.T. Dubas, Chulalongkorn University, Thailand

[P2.010] Polymerization of oligo(ethylene glycol) methacrylate from monodisperse poly(glycidyl methacrylate) microspheres to reduce non-specific protein adsorption S. Grama*1, H. Heuts2, D. Horak1, 1Institute of Macromolecular Chemistry AS CR, v.v.i., Czech Republic, 2Eindhoven University of Technology, The Netherlands

[P2.011] Functional polymeric electron donors and their hybrid nanostructures for organic electronics. A.K. Andreopoulou*1 ,2, S. Kakogianni1, P. Giannopoulos1, C. Anastasopoulos1, J.K. Kallitsis1 ,2, 1University of Patras, Greece, 2Foundation for Research and Technology Hellas, Greece

[P2.012] Cross-linkable polymers for high temperature - polymer electrolyte membrane fuel cells: from chemistry to application A.K. Andreopoulou1 ,2, J.K. Kallitsis*1, 1University of Patras, Greece, 2Foundation for Research and Technology Hellas, Greece

[P2.013] Twin polymerization - general aspects and classification of monomers A. Seifert*, T. Ebert, S. Spange, Technische Universität Chemnitz, Germany

[P2.014] MMP-sensitive PEG hydrogel microspheres for targeted delivery of tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) into Glioblastoma (GBM) Cells P. Erkoc*, M. Mohammadi, T. Bagci Onder, S. Kizilel, Koc University, Turkey

[P2.015] Photoresponsive aqueous microgels D.I. Phua*1 ,2, A. Rudov1, Y. Zakrevskyy2, I. Potemkin1 ,2, A. Pich1, 1DWI - Leibniz Institute for Interactive Materials, Germany, 2Institut für Technische und Makromolekulare Chemie, RWTH Aachen University, Germany

[P2.016] Bacterial cellulose -composite hydrogels with interpenetrating polymer networks (IPN) applied for agrochemicals controlled release A. Zaharia1, A. Sarbu1, A-M. Florea*1 ,2, S. Iancu1, A-L. Radu1, T-V. Iordache1, M. Duldner1, T. Sandu1, A. Stoica2, M. Stroescu2, 1The National Research & Development Institute for Chemistry and Petrochemistry ICECHIM, Romania,

2University “Politehnica” of Bucharest, Romania [P2.017] Synthesis of unique hypericin adsorbents using a new molecularly imprinting approach

A-M. Florea*1 ,3, T-V. Iordache1, A. Sarbu1, C. Branger2, S. Apostol1, T. Sandu1, A. Zaharia1, A-L. Radu1, G. Hubca3, 1The National Research & Development Institute for Chemistry and Petrochemistry ICECHIM, Romania, 2Universit´e du Sud Toulon-Var-ISITV, France, 3University “Politehnica” of Bucharest, Romania

[P2.018] Light responsive "clicked" spiropyran-amylose derivatives: preparation and characterization D. Barsi*1, S. Bronco1, A. Tarantino1 ,2, V. Castelvetro2, M. Bertoldo1, 1IPCF-CNR, Italy, 2Università di Pisa, Italy

[P2.019] Bi-component network hydrogels sensitive to mechanical or temperature stimuli for cell manipulation applications I. Aranaz1, E. Martínez-Campos2, M.E. Nash1, M.G. Tardajos1, H. Reinecke1, C. Elvira*1, V. Ramos2, J.L. López-Lacomba2, A.


gallardo1, 1Institute of Polymer Science and Technology, CSIC, Spain, 2Complutense University of Madrid, Spain [P2.020] OEGylation as a robust strategy to endow macromolecules with unprecedented thermoresponsiveness

W. Li*, J. Yan, X. Zhang, L. Liu, A. Zhang, Shanghai University, China

[P2.021] Copolymerization of cyclohexene oxide with carbon dioxide in the presence of lactic acid oligomers A. Frydrych*, M. Ambroziak, Z. Florjanczyk, A. Plichta, Warsaw University of Technology, Poland

[P2.022] Synthesis and depolymerization of star-like lactic acid oligomers A. Frydrych*, J. Owczarek, Z. Florjanczyk, A. Plichta, Warsaw University of Technology, Poland

[P2.023] Helix-sense-selective polymerization of acetylene monomers containing bulky pi-conjugated planar substituents Y. Zang*1, T. Aoki1 ,2, M. Teraguchi2, T. Kaneko1, 1Qiqihar University, China, 2Niigata University, Japan

[P2.024] Polyamide 6/SiO2 composites by coupled twin polymerization of deficient twin monomers K. Nagel*1, L. Kaßner1, R-E. Grützner2, R. Minkwitz2, A. Seifert1, S. Spange1, 1Technische Universität Chemnitz, Germany,

2BASF SE, Germany [P2.025] Functional organic-inorganic hybrid materials as adhesion promoter for anti-icing coatings

M. Göring*1, N. Klasbeck1, S. Höhne2, D. Nickel1, T. Lampke1, M. Holzschuh2, F. Simon2, K. Schreiter1, 1Technische Universität Chemnitz, Germany, 2Leibniz-Institut für Polymerforschung Dresden e.V., Germany

[P2.026] Nanogel incorporated-pH responsive hydrogel synthesis via visible light-induced photopolymerization G.E. Cinay*1, S. Kizilel1, Y. Hashimoto2, Y. Sasaki3 ,4, K. Akiyoshi2 ,3, 1Koc University, Turkey, 2Japan Science and Technology Agency, Japan, 3Kyoto University, Japan, 4Tokyo Medical and Dental University, Japan

[P2.027] Synthesis and micellization of well-defined amphiphilic ABCD 4-miktoarm star quarterpolymer Y. Li, N. Chen, S. Liu, G. Zhang*, University of Science and Technology of China, China

[P2.028] Novel Internal Donors based Ziegler-Natta Catalysts for Producing Phthalate Free Polypropylene B. Bhasker,*, S. Kaur,, G. Singh,, K. Naresh Kumar,, G.S. Kapur,, K. Shashi, Indian Oil Corporation Ltd, Research and Development Centre, India

[P2.029] Fully biobased polylactide triblock copolyesters based on a castor oil derivative Z. Beyazkilic, G. Lligadas, J.C. Ronda, M. Galià, V. Cádiz*, Rovira i Virgili University, Spain

[P2.030] Castor oil-based clickable linear polyurethanes: Synthesis and post-polymerization modification M. Comí, G. Lligadas, J.C. Ronda*, M. Galià, V. Cádiz, Rovira i Virgili University, Spain

[P2.031] Post-Polymerization modification of functional polyesters from castor and sunflower oils: Sequential and single step functionalization using thiols and alcoxyamines Z. Beyazkilic, G. Lligadas, J.C. Ronda, M. Galià*, V. Cádiz, University Rovira i Virgili, Spain

[P2.032] Polyvinylcaprolactame microgels, modified with oligoglycidol-macromonomers C. Willems*1 ,2, H. Keul2, A. Pich1 ,2, M. Möller1 ,2, 1DWI Leibniz-Institut für Interaktive Materialien, Germany, 2RWTH Aachen University, Germany

[P2.033] Novel polypropylene catalyst: Studies on propylene polymerization and product S. Kaur,*, M. Momin,, G. Singh,, B. Bantu,, N. Kumar, G.S. Kapur,, S. Kant, IndianOil Corporation, R&D Centre, India

[P2.034] Side chain thiol-functionalized poly(ethylene glycol) by postpolymerization modification of hydroxyl groups: Synthesis, crosslinking and inkjet printing A. Southan*1, E. Hoch1, V. Schönhaar2, K. Borchers2, C. Schuh2, M. Müller2, M. Bach1, G.E.M. Tovar1 ,2, 1University of Stuttgart, Germany, 2Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB, Germany

[P2.035] RAFT-mediated synthesis of polymer/Laponite composite latexes T.C. Chaparro*1 ,2, R.D. Silva1, A. Barros-Timmons3, M. Lansalot2, F. D'Agosto2, E. Bourgeat-Lami2, A.M. Santos1, 1University of São Paulo, Brazil, 2Université de Lyon, France, 3University of Aveiro, Portugal

[P2.036] RAFT-mediated synthesis of polymer/montmorillonite hybrid latexes R.D. Silva1, T.C. Chaparro*1 ,2, R.S. Hardt1, I.S. Monteiro1, A. Barros-Timmons3, M. Lansalot2, F. D'Agosto2, E. Bourgeat-Lami2, A.M. Santos1, 1University of São Paulo, Brazil, 2Université de Lyon, France, 3University of Aveiro, Portugal

[P2.037] Is a poly(ethylene glycol) a safe cross-linker? Its usefulness in material and tissue engineering A.B. Bajek*1, J.S.W. Skopinska-Wisniewska1, M.M. Maj1, K.O. Olszewski1, A.S. Sionkowska1, T.D. Drewa1 ,2, 1Nicolaus Copernicus University, Poland, 2Nicolaus Copernicus Hospital, Poland

[P2.038] Poly (vinyl alcohol)/bentonite cryogels for potential wound dressings J.S. Gonzalez*, V.A. Alvarez, Research Institute of Material Science and Technology (INTEMA) (CONICET-UNMdP), Argentina

[P2.039] Sponges of diepoxy terminated-PDMS and magnetic nanoparticles J.S. Gonzalez*, C.E. Hoppe, Research Institute of Material Science and Technology (INTEMA) (CONICET-UNMdP), Argentina

[P2.040] Synthesis and characterization of highly transparent semi-aromatic polyimide films for flexible substrates applications L. Fan*, L. Zhai, Y. Wen, H. Liu, S.Y. Yang, Chinese Academy of Sciences, China

[P2.041] Melt processability of reactive endcapped aromatic polyimides


S.Y. Yang*, M. Ji, C.N. Su, L. Fan, Chinese Academy of Sciences, China [P2.042] Carbon nanotube-controlled formation of polyolefin/polar polymer nano alloys

J.Y. Dong*, Y. Liu, Institute of Chemistry, CAS, China [P2.043] Reactive polymer colloids for surface applications

T. Zosel*1 ,2, H. Thomas1, A. Pich1, M. Möller1, 1DWI Leibniz Institut für Interaktive Materialien, Germany, 2Dutch Polymer Institute, The Netherlands

[P2.044] Development and characterization of gelatin based silver nanoparticle composite antimicrobial films S. Kumar*1 ,2, D. Halder2, A. Mitra3, 1Central Institute of Technology Kokrajhar, India, 2Jadavpur University, India, 3Sree Chaitanya Collge, India

[P2.045] Synthesis and atomistic simulation of pyrene functionalized α,ω-pmma as dispersing agent of graphene for the fabrication of polymer nanocomposites C. Tsitsilianis*1 ,2, K.D. Papadimitriou1, E.N. Skountzos1, S. Gkermpoura1, V.G. Mavrantzas1, C. Galiotis1, 1FORTH/ICE-HT, Greece, 2Universty of Patras, Greece, 3ETH-Zurich, Switzerland

[P2.046] Biodegradable injectable hydrogels by hierarchical self-organization of a stimulus responsive triblock copolypeptide C. Tsitsilianis*1 ,3, A. Avgeropoulos2, M-T. Popescu1, G. Liontos2, 1University of Patras, Greece, 2University of Ioannina, Greece, 3Institute of Chemical Engineering Sciences, ICE/HT-FORTH, Greece

[P2.047] Macroscopic mechanics vs. microscopic molecular dynamics in polymeric materials: low-field rheoNMR as a new tool for material science V. Raentzsch*, G. Guthausen, M. Wilhelm, Karlsruhe Institute of Technology, Germany

[P2.048] Full factorial design for optimization of non-steroidal anti-inflammatory drug loaded PCL-PEG-PCL (PCEC) microspheres F. Rezgui*, L-H. Azouz, T. Baouz, N. Djama, F. Djerada, University of BEJAIA, Algeria

[P2.049] Block copolymer-phospholipid hybrid membranes – combining properties from both worlds in one membrane M. Bieligmeyer*1, T. Schiestel2, T. Hirth1 ,2, M. Müller2, 1University of Stuttgart, Germany, 2Fraunhofer IGB Stuttgart, Germany

[P2.050] Study on the self-assembly of poly(isoprene-block-ethylene oxide) towards the formation of biomimetic membranes M. Bieligmeyer*1, T. Schiestel2, T. Hirth1 ,2, M. Müller2, 1University of Stuttgart, Germany, 2Fraunhofer IGB Stuttgart, Germany

[P2.051] Thermoplastic elastomers from Ni-catalyzed α-olefins polymerization F. Bertini*, M. Canetti, A. Cacciamani, G. Leone, M. Mauri, G. Ricci, ISMAC-CNR, Italy

[P2.052] Concentration effect of two non ionic surfactants on microencapsulation by complex coacervation using biopolymers. D. Mancer*, K. Daoud, Houari Boumediene University of Science and Technology, Algeria

[P2.053] Stratified responsive brush-gel films: Toward biomimetic graded interfaces S.N. Ramakrishna1, M. Cirelli2, E.M. Benetti*1, 1ETH Zürich, Switzerland, 2University of Twente, The Netherlands

[P2.054] Nanocrystallization phase separation: Fabrication methodology of mesoporous polymers S. Samitsu*, Y. Fujii, I. Ichinose, National Institute for Materials Science, Japan

[P2.055] Removal of oil contaminants from water by high performance polymeric porous materials J. Pinto*, D. Fragouli, A. Athanassiou, Istituto Italiano di Tecnologia (IIT), Italy

[P2.056] Polymeric membranes and foams for water purification: Oil/water separation and ion extraction processes A. Chavan, S. Barroso, M.E. Genovese, U.C. Paul, J. Pinto*, D. Fragouli, A. Athanassiou, Istituto Italiano di Tecnologia (IIT), Italy

[P2.057] Synthesis and morphological properties of PS–b–PNIPAM block copolymers M. Cetintas*, M. Kamperman, Wageningen University, The Netherlands

[P2.058] Effect of graphite oxidation in the thermal properties and flame retardant of polypropilene/graphite oxide nanocomposites D.A. Simon*1 ,2, E. Bischoff1, T.S. Daitx1, R.S. Mauler1, 1UFRGS, Brazil, 2IFRS, Brazil

[P2.059] PP/hemp fibers composites with balanced stiffness - toughness D.M. Panaitescu*1, Z. Vuluga1, C.G. Sanporean2, R. Gabor1, C. Nicolae1, M. Ghiurea1, M. Iorga1, D. Florea1, C. Zaharia3, 1NIRD Chemistry and Petrochemistry ICECHIM, Romania, 2Aalborg University, Denmark, 3Politehnica University of Bucharest, Romania

[P2.060] Morphological investigation of polyhydroxyalkanoates containing cellulose nanofibers D.M. Panaitescu*1, A.N. Frone1, R. Gabor1, C. Nicolae1, P. Stanescu1, C. Zaharia1, A. Casarica1, I. Chiulan1, 1NIRD Chemistry and Petrochemistry ICECHIM, Romania, 2Politehnica University of Bucharest, Romania, 3NIRD for Chemistry – Pharmaceutics, Romania

[P2.061] Molecular Engineering of 3-Alkylthiophene Polymers Y. He, J. Chen, J. Keum, P. Bonnesen, K. Hong*, Oak Ridge National Laboratory, USA

[P2.062] Degradation of poly(L-lactide) under CO2 laser treatment


A.J. Antonczak*, B.D. Stepak, K. Szustakiewicz, J. Filipiak, C. Pezowicz, K.M. Abramski, Wroclaw University of Technology, Poland

[P2.063] Effect of NaC and PVA on the phase transition behaviour of PNIPAM – A fluorescence study H. Erothu*1, A.C. Kumar1 ,2, A.K. Mishra1, 1IIT Madras, India, 2Acharya Nagarjuna University, India

[P2.064] Intramolecular cyclization in hyperbranched polymers: Quantitative determination and topology regulation J. Kong, Northwestern Polytechnical University, China

[P2.065] Triple stimuli responsiveness of a supramolecular gel formed by mussel-inspired DOPA/boron coordination M. Vatankhah-Varnoosfaderani2 ,3, A. GhavamiNejad2, S. Hashmi2 ,4, F.J. Stadler*1 ,2, 1Shenzhen University, China,

2Chonbuk National University, Republic of Korea, 3University of North Carolina Chapel Hill, USA, 4NED University of Engineering&Technology, Pakistan

[P2.066] Programmed to self-destruct: From passive switching to active self-regulation in self-assemblies A. Walther*, T. Heuser, A-K. Steppert, E. Weyandt, DWI - Leibniz-Institute for Interactive Materials, Germany

[P2.067] Hybrid hairy janus particles: New facets of multifunctional materials A. Synytska*1 ,2, A. Kirillova1 ,2, C. Marschelke1 ,2, S. Marx1, 1Leibniz-Institut für Polymerforschung Dresden, Germany,

2Technische Universität Dresden, Germany [P2.068] Hybrid hairy janus particles: Controlled design and assembly

A. Kirillova*1 ,2, C. Marschelke1 ,2, A. Synytska1 ,2, 1Leibniz-Institut für Polymerforschung Dresden, Germany, 2Technische Universität Dresden, Germany

[P2.069] Hybrid core-shell particles for new generation of anti-icing surfaces: Interplay of chemical, topographical and mechanical heterogeneity J. Chanda*1 ,2, A. Synytska1, 1Leibniz-Institut für Polymerforschung Dresden, Germany, 2Technische Universität Dresden, Germany

[P2.070] Molecular bottlebrushes: Synthesis and their aggregation Y.M. Chen, Sun Yat-Sen University, China

[P2.071] Poly(vinyl alcohol)-sodium sulfate decahydrate suspensions as innovative thermal energy storage systems E. Adigüzel*, C. Alkan, Gaziosmanpasa Univ., Turkey

[P2.072] Carboxymethyl cellulose sodium sulfate decahydrate microdomains as innovative thermal energy storage systems A. Çetin*, C. Alkan, Gaziosmanpasa University, Turkey

[P2.073] Effect of the p-Toluene Sulfonic Acid and Ammonium Persulfate on the electrical conductivity of compositePoly (Vinylidene Fluoride)/Polyaniline A.M. Naspolini3, G.W. Duarte2, E.C. Consenso3, J.M.M. Mello1, J. DalMagro1, H.G. Riella2, M.A. Fiori*1, 1UNOCHAPECO, Brazil, 2UFSC, Brazil, 3UNESC, Brazil

[P2.074] Synthesis of polyphosphate polymer employing the Bisphenol (BHBF) and the Dichloride of Phenylphosphonic (PPDC): Evaluation of the thermal characteristics L. Dominguini*2, K. Martinello3, M. Peterson3, H.G. Riella2, M.A. Fiori1, 1UNOCHAPECO, Brazil, 2UFSC, Brazil, 3UNESC, Brazil

[P2.075] Synthesis and characterization of biological and rheological properties of PCL/chitosan/Zn-doped HA electrospun nanocomposite scaffolds with enhanced osteoconductivity F. Mohammad Ghorbani*, B. Kaffashi, P. Shokrollahi, D. Mohammad Ghorbani, Tehran university, Iran

[P2.076] The relation of branching indexes in the detection of branching in size exclusion chromatography with multiple detection M. Netopilík*, M. Janata, O. Trhlíková, Academy of Sciences of the Czech Republic, Czech Republic

[P2.077] Phase separation between hyaluronic acid and chitosan A.B. Kayitmazer, A.F. Koksal, E. Kilic Iyilik*, Bogazici University, Turkey

[P2.078] Antimicrobial, physical and mechanical properties of cassava starch based foams incorporated with nano ZnO E.S. Iriani*1, S. Yuliani1, R. Rahmatunisa2, N.E. Suyatma2, R. Sjarief2, 1ICAPRD, Indonesia, 2Bogor Agriculture University, Indonesia

[P2.079] Mechanism of drug release from polycaprolactone films J. Peerapattana*, T. Ngamsupsiri, N. Cheucharoenvasuchai, Khon Kaen University, Thailand

[P2.080] Preparation of electrospun nanofiber meshes of N,N,N-trimethylated chitosan/poly(ε-caprolactone)/Ecoflex® as a potential support for cell culture. L.A. Oliveira, J.F. Piai, A.F. Martins, E.C. Muniz*, Maringá State University (UEM), Brazil

[P2.081] Improving photocatalytic activity: novel polyoxometalate - polyelectrolyte assemblies for solar energy conversion A. Kutz*, F. Gröhn, Universität Erlangen- Nürnberg, Germany

[P2.082] Legume proteins based materials: preparation and thermal characterization L. Ricci1, T. Messina1, M.C. Righetti1, C. Zurlini2, E. Umiltà2, S. Bronco1, M. Bertoldo*1, 1Consiglio Nazionale delle Ricerche, Italy, 2Stazione Sperimentale per l’Industria delle Conserve Alimentari, Italy


[P2.083] Poly(ethylene glycol)-sodium sulfate decahydrate mixtures as innovative thermal energy storage systems C. Alkan*, E. Adigüzel, Gaziosmanpasa University, Turkey

[P2.084] Micro/nano encapsulated capric-myristic acid eutectic mixture in PMMA shell C. Alkan*, A. Sari, A.N. Özcan, D. Kahraman Dögüscü, A. Biçer, A. Altintas, Gaziosmanpasa University, Turkey

[P2.085] Stretching of single, conjugated polyelectrolyte inside a protein capsid E.H. Cingil*, I.M. Storm, M.A. Cohen Stuart, J. Sprakel, Wageningen University, The Netherlands

[P2.086] Self-healing thermosetting polymers with remote activation F.I. Altuna*1, G.F. Arenas2, J. Antonacci2, V. Pettarin1 ,2, C.E. Hoppe1 ,2, R.J.J. Williams1 ,2, 1Materials Science and Technology Research Institute, Argentina, 2Universidad Nacional de Mar del Plata, Argentina

[P2.087] Copolymer nanoparticles via RAFT emulsion polymerization: synthesis, characterization and interfacial activity V.J. Cunningham*1, A.M. Alswieleh1, K.L. Thompson1, M. Williams1, G.J. Leggett1, O.M. Musa2, S.P. Armes1, 1University of Sheffield, UK, 2Ashland Specialty Ingredients, USA

[P2.088] Influence of sample morphology on plasmonic enhancement of F8BT/PFO fluorescence S. Zecevic*, K. Smolarek, S. Mackowski, Nicolaus Copernicus University, Poland

[P2.089] Thermal behaviour of fibrillar polypropylene/polyamide6 blend fibre R. Hajiraissi*, T. Hallmann, University Paderborn, Germany

[P2.090] Hierarchical supramolecular structuring and dynamical properties of water soluble polyethylene glycol-perylene self-assemblies N. Jouault1, Y. Xiang2, E. Moulin2, G. Fucks2, N. Giuseppone2, E. Buhler*1, 1University Paris Diderot, France, 2University of Strasbourg, France

[P2.091] Investigation of interface properties of polypropylene multi-layer pipes via Raman-spectroscopy and X-ray scattering techniques M. Feuchter*1 ,2, K. Bruckmoser1, F. Arbeiter1, K. Resch1, G. Pinter1 ,2, 1Montanuniversitaet Leoben, Austria, 2Polymer Competence Center Leoben GmbH, Austria

[P2.092] Biobased polylactide nanocomposite fibers with fumed nanosilica I. Dabrowska1 ,2, C. Gavazza1, L. Fambri*1 ,2, 1University of Trento, Italy, 2National Interuniversity Consortium for Science and Technology of Materials (INSTM), Firenze, Italy

[P2.093] Polypropylene kaolinite nanocomposite fibers. Production and XRD characterization L. Lutterotti, I. Dabrowska, L. Fambri*, University of Trento, Italy

[P2.094] Exploring strategies for high dielectric constant and low loss polymer dielectrics L. Zhu, Case Western Reserve University, USA

[P2.095] Spherulite morphology and growth rate of PLLA/PDLA stereocomplex H.C. Ko, T.M. Wu, T.W. Shyr*, Feng Chia University, Taiwan

[P2.096] Slow release kinetics of alginate beads H. Kaygusuz1, B. Erim1, O. Pekcan2, G. Evingur*3, 1Istanbul Technical University, Turkey, 2Kadir Has University, Turkey,

3Piri Reis University, Turkey [P2.097] Dispersion and localization of graphene nanoplatelets in immiscible PC/SAN blends

M. Liebscher1 ,2, M.O. Blais1, P. Pötschke*1, G. Heinrich1 ,2, 1Leibniz-Institut für Polymerforschung Dresden e.V., Germany,

2Tecnische Universität Dresden, Germany [P2.098] Electrical and thermal properties of MWCNT filled PA6 or PA66 composites and PA6/PA66 blends

L. Noack, B. Krause, P. Pötschke*, Leibniz-Institut für Polymerforschung Dresden e.V., Germany [P2.099] Control of nano-fillers orientation in a polymer composite from purely thermo-mechanical loadings

S.A.E. Boyer1, M. Gerland*1, E. Piorkowska2, 1CNRS PPRIME ISAE-ENSMA, France, 2PAN, Poland [P2.100] The versatility of transmission electron microscopy and scanning electron microscopy to precise the gas molecular

interactions with microstructural polymer parameters M. Gerland*, S.A.E. Boyer, CNRS PPRIME ISAE-ENSMA, France

[P2.101] Strain-induced crystallization in amorphous PET and mechanical strain hardening; kinetics and modelling N. Billon*, J-M. Haudin, Mines Paristech CEMEF, France

[P2.102] Developing poly(vinyl alcohol)/curcumin fibers for smart packaging application via electrospinning technique O. Bijaisoradat*, S.T. Dubas, Petroleum and Petrochemical college, Chulalongkorn University, Thailand

[P2.103] Preparation and characterization of PVDF- microcrystalline cellulose (MCC) nanocomposite by melt process P. Chanajaree*, H. Manuspiya, Chulalongkorn University, Thailand

[P2.104] Preparation flexible electrode of reduced graphene oxide/polymer nanocomposite by layer-by-layer assembly S. Charoensuk*, S.T. Dubas, Petroleum and Petrochemical college, Chulalongkorn University, Thailand

[P2.105] Frontiers in molecularly imprinted polymers' science S.O. Dima*1 ,2, T. Dobre1, F. Oancea2, W. Meouche3, 1University Politehnica from Bucharest, Romania, 2National Research & Development Institute for Chemistry and Petrochemistry ICECHIM, Romania, 3Modern University of Business and


Science, Lebanon [P2.106] Simulation study on free radical polymerization kinetics - a Monte Carlo schedule

P. Chen*, R. Xia, J-S. Qian, B. Yang, J-B. Miao, M. Cao, Anhui University, China

[P2.107] Synthesis of novel reactive polymers for nanoencapsulation of bioactive ingredients C. Cuscó*1 ,2, H. El Housni1, J. Rocas1, J. Garcia2, E. Nicolás2, 1Ecopol Tech SL, Spain, 2Universitat de Barcelona, Spain

[P2.108] Chemical modification and broadband dielectric spectroscopy of polystyrene-block-polyisoprene diblock copolymers P. Georgopanos*1, S. Rangou1, V. Filiz1, U.A. Handge1, V. Abetz1 ,2, 1Helmholtz-Zentrum Geesthacht, Germany, 2University of Hamburg, Germany

[P2.109] Enzymatically degradable polyphosphazene-based polymeric drug carriers A. Bornschlegel*1, M. König1, A. Halfmann2, A. Dohnal2, O. Brüggemann1, I. Teasdale1, 1Johannes Kepler University, Austria, 2Medical University Vienna, Austria

[P2.110] The modification of heparin for self-assembled multilayer film loaded with growth factor. M. Kumorek*1, D. Kubies1, E. Filová1, N. Kasoju1, E. Mázl-Chánová1, M. Houska1, R. Matejka2 ,3, L. Stankova1, L. Bacaková1, F. Rypácek1, 1Academy of Sciences of the Czech Republic, Czech Republic, 2Charles University in Prague, Czech Republic,

3Czech Technical University in Prague, Czech Republic [P2.111] Synthesis and characterization of olive oil-loaded chitosan/N-Isopropyl acrylamide complex

D.K. Kakati*, C. Deka, Gauhati University, India [P2.112] EVOH/clay nanocomposites obtained in melt extrusion process

K. Szustakiewicz*, A.J. Antonczak, B.D. Stepak, K. Lecka, J. Piglowski, Wroclaw University of Technology, Poland [P2.113] Importance of displacement measurement location of polymeric dogbone tensile test specimens

D. Guner, H. Ozturk*, METU, Turkey [P2.114] Preparation of polyvinyl acetate loaded with mangosteen extracts for use as antibacterial spray dressing

N. Boonmak*, P. Ekabutr, P. Supaphol, The Petroleum and Petrochemical College, Chulalongkorn University, Thailand [P2.115] RGD peptide based hydrogels for cell therapy

A. C.Kumar*1, H. Erothu1, G. Battaglia2, P. D.Topham1, 1Aston University, UK, 2University College London, UK [P2.116] Electro-optical properties of polyaniline multilayers thin film containing in situ silver nanoparticles

P. Tongtun*, S.T. Dubas, Petroluem and Petrochemical College, Chulalongkorn University, Thailand [P2.117] Development of innovative antibacterial wound dressing coated with garcinia mangostana and calcium alginate

S. Panawas*, P. Ekabutr, P. Supaphol, Chulalongkorn University, Thailand [P2.118] Consequences of folding a single chain polymer in water

M. Artar*1, A.R.A. Palmans1, E.W. Meijer1, 1Institute for Complex Molecular Systems, The Netherlands, 2Laboratory of Macromolecular and Organic Chemistry, The Netherlands

[P2.119] Study of aluminum nitride Piezo-MEMS Energy Harvestor on Polyimide Flexible Substrate X.L. Yin1, W.J. Dong*1 ,2, 1Dalian University of Technology, China, 2Liaoning Provincial Key Laboratory of Integrated Circuits Technology, China

[P2.120] Fan-structure wind energy harvester using circular array of Polyvinylidene Fluoride cantilevers G.L. Song1, F.X. Bai1 ,2, W.J. Dong*1 ,2, 1Dalian University of Technology, China, 2Liaoning Provincial Key Laboratory of Integrated Circuits Technology, China

[P2.121] Electrospun nanofiber compozites from PLGA and hyaluronic acid and their derivates K. Knotkova*, J. Benovicova, V. Velebny, Contipro Biotech, Czech Republic

[P2.122] Development of antibacterial wound dressing coated with mangosteen extracts for burn wounds J. Niyompanich*, P. Ekabutr, P. Supaphol, The Petroleum and Petrochemical College, Chulalongkorn University, Thailand

[P2.123] Microstructure and proton conductivity of a cross linked hydrophilic ionic polymer membrane: competitive hydration and multi-scale water clustering C. Ajith*, A. P.Deshpande, S. Varughese, V.K. Aswal, IIT Madras, India

[P2.124] Selective extraction of Quercetin with molecularly imprinted membranes L. Donato*1, I. Iben Nasser1 ,2, C. Algieri1, C. Ahmed2, E. Drioli1, 1CNR, Italy, 2University of Monastir, Tunisia

[P2.125] Damage propagation in reinforced pipe grade polypropylene under fatigue loads F. Arbeiter*1, G. Pinter1 ,2, A. Frank2, 1Materials Science and Testing of Polymers, Montanuniversitaet Leoben, Austria,

2Polymer Competence Center Leoben GmbH, Austria [P2.126] Uniform block copolymers in directed self-assembly and nanofabrication for nanolithography

L.M. Pitet*1, B. van Genabeek1, S. Wuister2, T. Druzhinina2, E. Peeters3, E. Alexander-Moonen3, N.A. Lynd4, E.W. Meijer1, 1Eindhoven University of Technology, The Netherlands, 2ASML, The Netherlands, 3Philips, The Netherlands, 4University of Texas at Austin, USA

[P2.127] Understanding the partial hydrolysis of poly(2-oxazoline)s


M.A. Mees*, R. Hoogenboom, Ugent, Belgium [P2.128] Partial hydrolysis of Poly(2-propyloxazoline)s as basis for efficient DNA encapsulation

M.A. Mees*1, E. Haladjova2, S. Rangelov2, C.B. Tsvetanov2, R. Hoogenboom1, 1Ugent, Belgium, 2Bulgarian Academia of Science, Belgium

[P2.129] Improvement of processing behavior and impact properties of polylactide (PLLA) by blending with poly(ethylene-co-vinylacetate) H-J. Radusch*1 ,2, W. Anton1, A. Wutzler2, 1University Halle-Wittenberg, Germany, 2Polymer Service GmbH Merseburg, Germany

[P2.130] Amphiphilic conjugates based on PEG and aspartic acid with a hydrophobic fragments attached by covalent and ionic bonds L.I. Kaberov*2, N.V. Girbasova1, A.Y. Bilibin1, 1Saint-Petersburg State University, Russia, 2Institute of Macromolecular Chemistry AS CR v.v.i., Czech Republic

[P2.131] The influence of polymer location in mesoporous silica films on ionic permselectivity and redox-responsve permselectivity gating L. Silies*, J. Elbert, M. Gallei, A. Andrieu-Brunsen, Technische Universität Darmstadt, Germany

[P2.132] Compressibility characteristics and release modulating properties of cyclodextrin nanosponges in preparation of extended release tablets of cilostazol C. Desai1, B. Prabhakar*1, 1University of Milan, Italy, 2SVKM's NMIMS University, India

[P2.133] A novel resistive humidity sensor with temperature compensation and improved aging effects G.H. Ershadi-Oskoui*, R. Binions, P. Vadgama, Queen Mary University London, UK

[P2.134] A new generation of (bio)degradable furanic polyesters A.F. Sousa*1 ,2, M. Matos1, C.S.R. Freire1, J.F.J. Coelho2, A.J.D. Silvestre1, 1University of Aveiro, Portugal, 2University of Coimbra, Portugal

[P2.135] Synthesis and characterization of carboxymethylagarose-g-PNIPAAm copolymers J.O. Ortiz*1, B.M. Matsuhiro1, P.Z. Zapata1, T.C. Corrales2, 1Universidad de Santiago de Chile, Chile, 2Instituto de Ciencia y Tecnología CSIC, Spain

[P2.136] Toughening epoxy-silica nanocomposites with task-specific ionic liquids R.K. Donato*1 ,2, M. Perchacz2, K.Z. Donato1, H. Benes2, H.S. Schrekker1, L. Matejka2, 1Federal University of Rio Grande do Sul - UFRGS, Brazil, 2Academy of Sciences of the Czech Republic, Czech Republic

[P2.137] Effect of the organosilane modification of HNT on the thermal and mechanical properties of heterophasic PE-PP copolymer nanocomposites E. Bischoff*, T.S. Daitx, D.A. Simon, S.A. Liberman, R.S. Mauler, Federal University of Rio Grande do Sul, Brazil

[P2.138] Bioresorbable Polyhydroxybutyrate/Hydroxyapatite composites for bone replacements F.S. Senatov*1, N.Y. Anisimova2, A.N. Kopylov2, V.V. Tcherdyntsev1, S.D. Kaloshkin1, A.V. Maksimkin1, D.I. Chukov1, S.I. Senatova1, 1National University of Science and Technology ‘‘MISIS’’, Russia, 2N.N. Blokhin Russian Cancer Research Center, Russia

[P2.139] Investigation on the effect of nanocellulose on the properties of electrospun polymer nanofibres A. Sutka*1 ,2, J. Gravitis2, S. Kukle1, 1Riga Technical University, Latvia, 2Latvian State Institute of Wood Chemistry, Latvia

[P2.140] Modification of inorganic particles with organophosphorus compounds for application as flame retardants in polymeric systems C.B. Visentini*, R.S. Mauler, S.A. Liberman, UFRGS, Brazil

[P2.141] Biodegradable polymer/silica/ionic liquidnanocomposites as high performance packaging K.Z. Donato*1 ,2, R.K. Donato1, M. Lavorgna2, L. Ambrosio2, H.S. Schrekker1, R.S. Mauler1, 1Universidade Federal do Rio Grande do Sul (UFRGS), Brazil, 2Istituto per i Polimeri, Compositi e Biomateriali (IPCB)-CNR, Italy

[P2.142] Performance of L-PRP and hyaluronic acid sponges as composite scaffolds for regenerative medicine A.A.M.S. Shimojo, A.G.M.P. Perez, W.D.B. Belangero, A.C.M.L. Luzo, J.F.L. Lana, C.C.S. Santana, M.H.A.S. Santana*, University of Campinas, Brazil

[P2.143] Preparation and characterization of epoxy/organoclay nanocomposites R. Ollier*, M. Penoff, M. Lanfranconi, V. Alvarez, INTEMA (National University of Mar del Plata - CONICET), Argentina

[P2.144] Influence of the shell material on the properties of epoxy microcapsules for self-healing applications R. Ollier*, M. Penoff, V. Alvarez, INTEMA (National University of Mar del Plata - CONICET), Argentina

[P2.145] Fluorescence correlation spectroscopy studies of molecular diffusion in polymer brushes A.L. Morales-Garcia*1, C.G. Clarkson1, Z. Zhang2, A. Johnson1, R.E. Ducker1, G.J. Leggett1, M. Geoghegan1, 1The University of Sheffield, UK, 2University of Strathclyde, UK

[P2.146] Galactose conjugated polymeric nanoparticles as hepatocyte-targeting drug carrier C. Raposo1, R. Costa2, K. Petrova1, C. Brito2, M.M. Cardoso*1, 1Universidade Nova de Lisboa, Portugal, 2iBET, Instituto de Biologia Experimental e Tecnológica, Portugal


[P2.147] Humic acids as a biopolymer for production of colloidal particles with potential use in pharmaceutical and cosmetic applications B.A.G.M. Melo, F.L.M. Motta, C.C.S. Santana*, M.H.A.S. Santana, University of Campinas, Brazil

[P2.148] Novel polypeptide-based architectures as nanocarriers: Synthesis, characterization, in vitro/ in vivo validation and applications in the treatment of Alzheimer's Disease (AD) A. Duro-Castano*, V.J. Nebot, L. Tortajada, M.J. Vicent, Centro de Investigación Príncipe Felipe, Spain

[P2.149] A novel wound dressing polymer produced by blending cashew gum polysaccharide and polyvinyl-alcohol with papain immobilized M.C. Leal*, K.A. Batista, C.N. Silva, L.R. Lamonier, F.E. Silva, K.F. Fernandes, Universidade Federal de Goiás, Brazil

[P2.150] Bisphosphonate/Polysacharide/Calcium phosphate coatings of titanium D. Kubies*1, O. Pop-Georgievski1, J. Zemek2, E. Mázl Chánová1, N. Neykova2 ,3, E. Filová4, L. Himmlová5, L. Bacáková4, F. Rypácek1, 1Institute of Macromolecular Chemistry AS CR, Czech Republic, 2Institute of Physics, AS CR, Czech Republic,

3Czech Technical University, Czech Republic, 4Institute of Physiology, AS CR, Czech Republic, 5Institute of Dental Reserarch, Czech Republic

[P2.151] Functionalized anisotropic channelled porous polymer scaffolds for guided tissue engineering N. Kasoju1, D. Kubies*1, J. Kríž2, E. Fábryová2, D. Jirák2, M. Kumorek1, L. Machová1, J. Koubková1, F. Rypácek1, 1Institute of Macromolecular Chemistry AS CR, Czech Republic, 2Institute for Clinical and Experimental Medicine, Czech Republic

[P2.152] The use of PEG-dialdehyde for cross-linking of collagen matrices J. Skopinska-Wisniewska*, A. Bajek, A. Sionkowska, Nicolaus Copernicus University, Poland

[P2.153] RGD peptide based hydrogels for cell therapy A.C. Kumar*1, H. Erothu1, G. Battaglia2, P.D. Topham1, 1Aston University, UK, 2University College London, UK

[P2.154] Effect of crystallinity on the excimer laser-induced degradation of polylactide B. Stepak*, A. Antonczak, K. Szustakiewicz, C. Pezowicz, K.M. Abramski, Wroclaw University of Technology, Poland

[P2.155] Influence of SEBS on properties of polypropylene copolymer and its nanocomposites based on Halloysite Z. Vuluga*1, C-G. Sanporean2, D.M. Panaitescu1, R. Gabor1, C. Nicolae1, M.C. Corobea1, M. Iorga1, D. Florea1, 1National Research and Development Institute for Chemistry and Petrochemistry-ICECHIM, Romania, 2Aalborg University, Denmark

[P2.156] Maldi-TOF spectrometry to characterize sugarcane bagasse lignin fractions R.F. Leite1, J. Campos2, R.M. Souto-Maior*1, 1Universidade Federal de Pernambuco, Brazil, 2Northeastern Center for Strategic Technologies - CETENE, Brazil

[P2.157] Synthesis thiophene derived electroactive aligned electrospun nanofiber scaffold for tissue regeneration S. Kim*1 ,2, D. Bennet1, 1Gachon University, Republic of Korea, 2Graduate Gachon Medical Research Institute, Republic of Korea

[P2.158] Silk-PLA alloy materials for biomedical applications X. HU*, F. WANG, Rowan University, USA

[P2.159] Biocomposites ENR/PLA with cellulose fibres K. Diakowska*, A. Masek, M. Zaborski, Lodz University of Technology, Poland

[P2.160] Flavonoids as pro-ecological stabilisators for polymeric materials A. Masek, K. Diakowska*, M. Zaborski, Lodz University of Technology, Poland

[P2.161] Investigation of usage of furnace slage in epoxy based ground covering polymer I. Gunes*, T. Uygunoglu, E. Dogan, Afyon Kocatepe University, Turkey

[P2.162] Effect of particle size of wastes including boron on mechanical properties of epoxy based polymer composites T. Uygunoglu, I. Gunes*, E. Dogan, C. Ozorak, Afyon Kocatepe University, Turkey

[P2.163] Nanostructure and properties of injection molded polypropylene/polyamide66 nanocomposites filled with nanoclays prepared by melt compounding B. Kouini*, A. Serier, UMBB University, Algeria

[P2.164] Efficient saturating compositions based on nanoscale oligosilazane fillers O.G. Ryzhova1, P.A. Storozhenko1, A.N. Polivanov1, I.A. Timofeev1, V.A. Beliaev*1, P.A. Timofeev1, 1FSUE GNIIChTEOS, Russia, 2JSC Kompozit, Russia

[P2.165] Fully processable cross-linked hydrogels for regenerative medical applications A. Thorpe, A. Essa, C. Le Maitre, C. Sammon*, Sheffield Hallam University, UK

[P2.166] Coupling of vibrational spectroscopies (IR, Raman) and Differential Scanning Calorimetry for the thermal behavior study of PVDF M. Veitmann1 ,2, D. Chapron1 ,2, S. Bizet3, S. Devisme3, J. Guilment3, P. Bourson*1 ,2, 1LMOPS, Université de Lorraine, France, 2LMOPS, Supélec, France, 3Arkema, France

[P2.167] Emulsion polymerization of styrene: in situ monitoring using raman spectroscopy E. Dropsit1 ,5, D. Chapron1 ,2, P. Bourson*1 ,2, S. Hoppe3 ,4, A. Durand5 ,6, 1Université de Lorraine, France, 2Supélec, France,

3Université de Lorraine, France, 4LRGP, UMR 7274, CNRS, France, 5Université de Lorraine, France, 6LCPM, FRE 3564, CNRS, France


[P2.168] Synthesis and investigations on polyurethane resins based on Cu(II) phthalocyanines: Implications as an organic filler in polymeric matrices H. Al-Turaif*1, T.E. Youssef1, 1King Abdylaziz University, Saudi Arabia, 2King Abdulaziz University, Saudi Arabia

[P2.169] Molecularly imprinted polymeric fibers for the selective seperation of Abacavir sulphate Z. Terzopoulou, D. Bikiaris*, D. Lambropoulou, Aristotle University of Thessaloniki, Greece

[P2.170] A study of MWCNTs reinforcement in P84 polyimide films P. Karantzis1 ,2, E.P. Favvas*1, A.A. Sapalidis1, N.D. Alexopoulos3, A. Vairis2, A.C. Mitropoulos4, 1Institute of nanoscience & Nanotechnology, Greece, 2Crete Institute of Technology, Greece, 3University of Aegean, Greece, 4Eastern Macedonia and Thrace Institute of Technology, Greece

[P2.171] Porosity control in aromatic polyether/water soluble polymers' membranes G.C. Lainioti*1 ,2, D.N. Saranti-Karamesini1 ,2, V. Deimede1 ,2, J.K. Kallitsis1 ,2, 1University of Patras, Greece, 2FORTH/ICE-HT, Greece

[P2.172] Covalent-bond layer-by-layer assembly of CNT/transition metal oxide nanoaprticle nanocomposite multilayer fims with high electrochemical properties for energy storage application Y. Ko*, M. Kwon, J. Cho, Korea university, Republic of Korea

[P2.173] Determination of melamine in milk products by molecularly imprinted stir bar sorptive extraction technique coupled with HPLC L. Zhu, G.H. Xu, F.D. Wei, J. Yang, Q. Hu*, Nanjing Medical University, China

[P2.174] Polyaddition-type silicone composite materials for high voltage electronic devices N.Y. Semenkova*, S.R. Nanushyan, V.N. Illarionov, K.S. Popova, FSUE GNIIChTEOS, Russia

[P2.175] Peculiarities of high-purity polymer materials technology S.R. Nanushyan*, N.Y. Semenkova, E.I. Alexeeva, FSUE GNIIChTEOS, Russia

[P2.176] Facile and controllable one-step fabrication of molecularly imprinted polymer membrane by magnetic field directed self-assembly for electrochemical sensing of glutathione W.Y. Zhu, G.Y. Jiang, B.Z. Li, Q.Z. Cai, H.J. Jiang, X.M. Zhou*, Nanjing Medical University, China

[P2.177] AND logic gate regulated pH- and reduction-responsive prodrug for efficient intracellular anticancer drug delivery F. Song*, L. Bai, X.H. Wang, X.L. Wang, Y.Z. Wang, Sichuan university, China

[P2.178] Shrinkage/Swelling of Polymeric Nanoparticles Induced by Hydrophobic Drug Entrapment A. Jäger*1, E. Jäger1, F.C. Giacomelli2, F. Nallet3, M. Steinhart1, J-L. Putaux4 ,5, K. Ulbrich1, P. Štepánek1, 1Institute of Macromolecular Chemistry, Czech Republic, 2University of ABC, Brazil, 3CNRS, Université de Bordeaux, France, 4CERMAV, Université Grenoble Alpes, France, 5CNRS, CERMAV, France

[P2.179] Synthesis of telechelic poly(tetrahydrofuran)-dibenzoate catalysed by Maghnite-H+ N.K. Zemri, A. Harrane*, M. Belbachir, University of Oran, Algeria

[P2.180] Nanostructured materials based on copolymers chitosan and N-vinylpyrrolidone using size-controlled Ag and Au nanoparticles K.V. Apryatina*, S.D. Zaitsev, A.E. Mochalova, O.N. Smirnova, L.A. Smirnova, N.I. Lobachevsky State University of Nizhniy Novgorod, Russia

[P2.181] Development of styrene-acrylate based surface sizing materials: investigation of the effects of initiator types M. Ozdemir Alp, M. Ozdemir, A. Aytac, V. Deniz*, Kocaeli university, Turkey

[P2.182] The effect of quaternary ammonium salts addition on the PLA/PHB nanofibres properties W. Gieparda*, J. Foksowicz-Flaczyk, J. Walentowska, D. Wesołek, S. Rojewski, Institute of Natural Fibres & Medicinal Plants, Poland

[P2.183] Synthesis of novel functional polymers mediated a superacid catalyst. O. Hernández*, M. Zolotukhin, Universidad Nacional Autónoma de México, Mexico

[P2.184] Encapsulation of paclitaxel in poly (styrene-so-methyl methacrylate) nanoparticles for controlled release G.A. FARZI*, A. Rajaei, M. Saffari, UCBL, France

[P2.185] Antimicrobial polymer composites based on hybrid carbon/metal nanostructures H. Palza, University of Chile, Chile

[P2.186] Effect of a novel polymer modified nanofiller on Micro-shear bond strength of dental adhesives L. Solhi*, M. Atai, A. Nodehi, M. Imani, Iran Polymer and Petrochemical Institute, Iran

[P2.187] Dynamic characterization of CNT/PP nanocomposite films and MAV flapping wings D. Kumar, S. Nishanth, A.K. Sonker*, S.K. Vemuri, V. Verma, P.M. Mohite, S. Kamle, Indian Institute of Technology Kanpur, India

[P2.188] Effect of WS2 nanotubes reinforcement on thermal and mechanical properties of cross-linked PVA A.K. Sonker*1, R. Bajpai2, X.M. Sui2, V. Verma1, R. Tenne2, H.D. Wagner2, 1Indian Institute of Technology, India,

2Weizmann Institute of Science, Israel [P2.189] Role of temperature, chain length and crystal structure in the mechanism of quiescent polymer crystal growth by


chain-folding H. Marand*, Z. Huang, S. Sheth, S. Sparks, Virginia Tech, USA

[P2.190] Investigation of structure- chelating properties relationship of Poly(1,2.3-triazole) latex particles H. Lahmar1, S. Saidi-Besbes*1, A. Elaissari2, A. Derdour1, 1Oran 1 university, Algeria, 2Lyon 1 university, France

[P2.191] Synergistic effect of organoclay fillers based on fluorinated surfmers for preparation of polystyrene nanocomposites C. Benbayer1 ,2, S. Saidi-Besbes*1, E. Taffin de Givenchy2, S. Amigoni2, F. Guittard2, A. Derdour1, 1Oran 1 university, Algeria, 2Nice sophia Antipolis university, France

[P2.194] Investigations on the use of biopolymers in coating materials A. Ślusarczyk1, M. Zubielewicz*1, A. Królikowska2, 1Institute for Engineering of Polymer Materials and Dyes, Poland,

2Road and Bridge Research Institute, Poland [P2.195] Macroporous hydrogel materials by cryogelation: conductive and stimuli- responsive materials.

I. Savina*1, V. Solodovnichenko3, Y-V. Guillard1, A. Sagitova2, Y. Kryazhev3, T. Abdullin2, S. Mikhalovsky1, 1University of Brighton, UK, 2Kazan Federal University, Russia, 3Institute of Hydrocarbons Processing SB RAS, Russia

[P2.196] Preparation and characterization of thermo-responsive poly(ethylene glycol) methacrylate-based copolymers F.R. Chiacchio, G. Gomez d'Ayala, F. Zuppardi, M. Malinconico, P. Cerruti*, Institute for Polymers, Composites and Biomaterials (IPCB-CNR), Italy

[P2.197] Synthesis and characterization of polyethyleneimine grafted PHB nanoparticles for non-viral siRNA delivery R. Conte1, F. Gioiello1, I. De Luca1, A. Calarco1, G. Peluso1, P. Cerruti*2, 1Institute of BioSciences and BioResources-CNR, Naples, Italy, 2Institute for Polymers, Composites and Biomaterials-CNR, Pozzuoli (Na), Italy

[P2.198] Electric field effect on spray deposited polymer film N. Chaturvedi, S.K. Swami, V. Dutta*, Indian Institute of Technology Delhi, India

[P2.199] Crystallization and elastic properties of syndiotactic propene-branched 1-olefins copolymers. M. Scoti, C. De Rosa*, F. Auriemma, R. Di Girolamo, University of Napoli, Italy

[P2.200] Crystallization Behavior and Mechanical Properties of Copolymers of Isotactic Poly(1-Butene) with 1-Octene from Metallocene Catalysts. C. De Rosa*, O. Tarallo, F. Auriemma, O. Ruiz de Ballesteros, R. Di Girolamo, A. Malafronte, University of Napoli, Italy

Poster Session 3

Friday, 22 May 2015 at 10:10-12:30

[P3.001] Use of biocatalysts for the synthesis of furan based polyesters V. van der Vlist*1 ,2, C.G. Boeriu1 ,2, G. Eggink1 ,2, 1Wageningen UR, The Netherlands, 2Dutch Polymer Institute, The Netherlands

[P3.002] Simultaneous detection of multi-pesticide residues in complicated matrices using the combination of molecularly imprinted solid-phase extraction and high-performance liquid chromatography X.M. Chen, L.Y. Zhang, Y. Peng, S.H. Du*, F. Li, School of Pharmacy, Nanjing Medical University, China

[P3.003] Poly(acrylonitrile-co-acrylic acid) copolymers and their wettability D. Kahraman Doguscu*, S. Ates, C. Alkan, Gaziosmanpasa University, Turkey

[P3.004] Increasing wettability of polyacrylonitrile by itoconic acid comonomer insertion Y. Damlioglu*, D. Kahraman Doguscu, C. Alkan, Gaziosmanpasa University, Turkey

[P3.005] The new eposy-glass supports for metal complex catalysts. N. Sienkiewicz*, K. Strzelec, T. Szmechtyk, Lodz University of Technology, Poland

[P3.006] Preparation of epoxy resin cured with ionic liquids as novel supports for platinum complex catalysts. N. Sienkiewicz*, K. Strzelec, T. Szmechtyk, Lodz University of Technology, Poland

[P3.007] Tri-n-butylboron - p-quinone as an effective catalyst system of radical copolymerization of styrene with (meth)acrylates D.V. Ludin*, Y.L. Kuznetsova, S.D. Zaytsev, Lobachevsky State University of Nizhny Novgorod, Russia

[P3.008] pH-Sensitive C-ON bond homolysis of alkoxyamines of imidazoline series: A theoretical study D. Parkhomenko1 ,3, M. Edeleva*1 ,3, V. Kiselev4, E. Bagryanskaya1, 1N.N.Vorozhtsov Novosibirsk Institute of Organic Chemistry SB RAS, Russia, 2International Tomography center SB RAS, Russia, 3Novosibirsk State University, Russia,

4Institute of Chemical Kinetics and Combustion SB RAS, Russia [P3.009] Sterically hindered imidazoline nitroxides for controlled/living polymerization of methyl methacrylate and styrene

M. Edeleva*1 ,3, D. Parkhomenko1 ,3, B. Kanagatov3, L. Tatarova2, V. Khlestkin3, D. Morozov1 ,3, I. Kirilyuk1, E. Bagryanskaya1 ,3, 1N.N.Vorozhtsov Novosibirsk Institute of Organic Chemistry SB RAS, Russia, 2International Tomography center SB RAS, Russia, 3Novosibirsk State University, Russia

[P3.010] Directional freezing of crosslinked pvp as a tool for the generation of highly oriented macroporous hydrogels J.S. González, H.E. Romeo, C.E. Hoppe*, INTEMA, CONICET, Argentina


[P3.011] Atom transfer radical polymerization catalyzed by copper trisodium chlorophyllin B. Gajewska*, N. Bruns, Adolphe Merkle Institute, University of Fribourg, Switzerland

[P3.012] Latent heat storage characteristics of micro/nano encapsulated eutectic mixture using polystyrene shell A. Sari, C. Alkan, Y. Mert*, A. Bicer, A. Altintas, D. Kahraman, C. Kizil, C. Bilgin, Gaziosmanpasa University, Turkey

[P3.013] Thermal energy storage by micro-nanoencapsulated n-octadecane in polystyrene Y. Mert*, C. Alkan, A. Sari, A. Biçer, D. Kahraman Dögüscü, A. Altintas, C. Kizil, C. Bilgin, Gaziosmanpasa University, Turkey

[P3.014] New stimuli acrylate-based co-polymers by RAFT polymerization A.S. Rodrigues*1 ,2, M.T. Charreyre2, A. Favier2, J.P.S. Farinha1, C. Baleizão1, 1Instituto Superior Técnico, Universidade de Lisboa, Portugal, 2ENS de Lyon, France

[P3.015] PMMA/clay nanocomposites prepared by in situ polymerization assisted by sonication B.R. Prado1, M.S. Marchesin1, J.R. Bartoli*1, E.N. Ito2, 1State University of Campinas, Brazil, 2Federal University of Rio Grande do Norte, Brazil

[P3.016] Study of the mechanical and chemical recycling of poly (lactic acid) (PLA) M. Cosate, G. Fonseca, M. Lopes, A.R. Morales, L. Mei, J.R. Bartoli*, UNICAMP, Brazil

[P3.017] Study of biodegradation behavior of compatibilized blends of PLA / PBAT in soil P.A. Palsikowski, C.N. Kuchnier, N.R. Lovato, A.R. Morales, J.R. Bartoli*, University of Campinas, Brazil

[P3.018] Graphene oxide functionalization with polysiloxanes for the synthesis of epoxy nanocomposites with improved properties C.M. Damian*, M.A. Vulcan, I.C. Radu, H. Iovu, University Politehnica of Bucharest, Romania

[P3.019] Stereo-regular polydienes bearing a functional end-group: one-pot synthetic strategies S. Georges, P. Zinck, M. Visseaux*, Université Lille 1, France

[P3.020] Effectively designed molecularly imprinted polymers for selective isolation of the antifungal drug fluconazole D. Lambropoulou*, S.G. Nanaki, G.Z. Kyzas, D.N. Bikiaris, P. Siafaka, Aristotle University of Thessaloniki, Greece

[P3.021] Application of hydrodinamic solution properties into gas-liquid phase heterogeneous sulfonation of polystyrene S. Hendrana.*1, S. Pujiastuti.1, I. Rahayu.2, C. Natalael.2, 1Indonesian Institute of Sciences (LIPI), Indonesia, 2Universitas Padjadjaran, Indonesia

[P3.022] New catalysts based on organic-inorganic copolymers containing poly(titanium oxide) and Au and Ag nanoparticles E.V. Salomatina*, A.Y. Sharova, A.V. Knyazev, L.A. Smirnova, N.I. Lobachevsky State University of Nizhniy Novgorod, Russia

[P3.023] Metal-bearing nanoparticles from the chelation-driven self-assembly of Diblock Co- and Ter- polymers: Preparation and characterization with AFM and LLS E. Kepola*, T. Krashia-Christophorou, C.S. Patrickios, University of Cyprus, Cyprus

[P3.024] Synthesis Of Hybrid Poly(Urea-Urethane)-Poly(Methyl-Methacrylate) Nanoparticles By Miniemulsion Polimerization E. Alves*, A. Valério, C. Sayer, UFSC, Brazil

[P3.025] Benzoxazine-functionalized graphene oxide for synthesis of new nanocomposites I. Biru, C. Andronescu, S.A. Garea, H. Iovu*, University Politehnica of Bucharest, Romania

[P3.026] Self-assembly characterization of amphiphilic linear diblock copolymer and amphiphilic hyperbranched polymers M. Elladiou*, C.S. Patrickios, University of Cyprus, Cyprus

[P3.027] New injectable biomaterials based on functionalized graphene with potential application for bone repair A.M. Pandele*, C. Andronescu, A. Ghebaur, B. Balanuca, A. Mihai, H. Iovu, University Polytechnica of Bucharest, Romania

[P3.028] The synthesis of poly(L-lactide-co-5-amino-5-methyl-1,3-dioxan-2-one)(P(LLA-co-TAC)) grafted by poly(γ-benzyl-L-glutamate)(PBLG) and its phase separation behaviors P. Dong*, D.P. Quan, Sun Yat-sen Unniversity, China

[P3.029] Stimuli-Responsive Hybrid Block Copolymer and Colloidal Architectures C. Rüttiger*, D. Scheid, C. Schäfer, J. Elbert, M. Gallei, Technische Universität Darmstadt, Germany

[P3.030] Facile Access to versatile hydrogel via Magnetocaloric Radical Polymerization C. Yu*, S. Chen, Nanjing TechUniversity, China

[P3.031] Poly(acrylonitrile-co-methacrylic acid) copolymers and their wettability A.A. Öncül1, D. Demirci1, G. Koman1, D. Kahraman Dögüscü*2, C. Alkan2, 1AKSA Acrylic Chemical Inc., Turkey,

2Gaziosmanpasa University, Turkey [P3.032] Synthesis of well-defined amphiphilic conetwork by RAFT polymerization

C. He*, H. Wang, D. Liu, Donghua University, China [P3.033] Amphiphilic conetworks synthesized by reversible addition-fragmentation transfer polymerization and thiol-ene click

chemistry C. He*, D. Liu, L. Zhang, H. Wang, Donghua University, China


[P3.035] Synthesis and characterization of innovative linear hyperbranched hybrid copolyesters as pvc plasticizers F. Samperi*, S. Battiato, C. Puglisi, IPCB UOS Catania, CNR, Italy

[P3.036] Synthesis and Application of Functional Polymers with Hierarchical Nanostructures H. Gao, University of Notre Dame, USA

[P3.037] New Copolymers by Reactive Melt Blending of PC/PEN system. C. Puglisi*, S. Battiato, F. Samperi, Istituto per i Polimeri, Compositi e Biomateriali (IPCB) UOS Catania, CNR,, Italy

[P3.038] Functionalized polysulfone and polysulfone-based triblock copolymers for high-performance water separation membranes Y. Xie*, R. Tayouo, S.P. Nunes, King Abdullah University of Science and Technology, Saudi Arabia

[P3.040] Synthesis of low density polyester particles as light-fillers for wood-based panels and thermoplastics S. Monteiro*1, A. Dias1, J. Ferra2, J. Martins3, L. Carvalho3 ,4, F.D. Magalhães4, 1ARCP-Associação Rede de Competência em Polímeros, Portugal, 2EuroResinas-Industrias Químicas S.A., Portugal, 3DEMad-Instituto Politécnico de Viseu, Portugal,

4LEPABE-Faculdade de Engenharia da Universidade do Porto, Portugal [P3.041] Synthesis and characterization of moisture cured prepolymer polyurethane films

A. Antunes*1, A. Henriques1, A. Dias2, J. Ferra3, J. Martins4, L. Carvalho4, F. Magalhães1, 1FEUP, Portugal, 2ARCP, Portugal,

3EURORESINAS, Portugal, 4IPV, Portugal [P3.042] Polymer nanoparticles prepared from amphiphilic fluorinated copolymer

M. Babic*1 ,2, K. Mader1, 1Institute of Macromolecular Chemistry AS CR, Czech Republic, 2Martin Luther University of Halle, Germany

[P3.043] C70-PS (Polystyrene) Copolymer: γ-ray Irradiation Synthesis and its Characterization J.F. Chen*, G.L. Shen, University of Science and Technology of China, China

[P3.044] Polymer Photonic Crystal Structures E. Bozzoni1, S. Congiu1, S. Gazzo1, R. Knarr III1, G. Manfredi1, D. Comoretto*1, P. Lova2, C. Soci2, G. Ianniello3, P. Rizzo3, 1Università di Genova, Italy, 2Nanyang Technological University, Singapore, 3Università di Salerno, Italy, 4Università di Pisa, Italy, 5Università del Piemonte Orientale «A. Avogadro»,, Italy, 6Istituto Nazionale di Ricerca Metrologica, Italy,

7Università di Bologna, Italy [P3.045] Applications of benz[cd]indol-2(1H)-one derivatives as photoinitiators of radical polymerisation

R. Strzelczyk*, R. Podsiadly, Lodz University of Technology, Poland [P3.046] Photoswitchable silica nano particles doped with vinylidene-naphthofurans

T. Pinto1, M.M. Aboelhassan1, A.F. Peixoto1, C. Pereira1, C. Freire1, O.S.G.P. Soares1, M.F. Pereira1, C. Sousa2, P. Coelho*2, 1University of Porto, Portugal, 2University of Trás-os-Montes e Alto Douro, Portugal

[P3.047] Systematic study of various gene delivery platforms based on dual responsive polymethacrylates A. Car*, J.T. Duskey, S. Keller, C. Palivan, W. Meier, University of Basel, Switzerland

[P3.048] Development of pH-triggered delivery system based on poly(oxazoline)s S. Stolarov*, A. Car, W.P. Meier, C.G. Palivan, University of Basel, Switzerland

[P3.049] Selforganization of Nanoagregates Polyurethane Coumarins M. Strat1, N. Cimpoesu1 ,2, V. Pohoata1, E. Buruiana3, G. Bulai1, S. Gurlui*1, 1Alexandru Ioan Cuza University of Iasi, Romania, 2Gh. Asachi Technical University, Romania, 3Petru Poni Institute of Macromolec.Chemistry, Romania

[P3.052] Interaction of sparsely grafted poly(4-methylstyrene-graft-2-vinylpyridine) with stationary phase in gradient liquid chromatography M. Netopilík1, O. Trhlíková*1, M. Janata1, R. Svitáková1, D. Berek2, 1Institute of Macromolecular Chemistry, Czech Republic, 2Polymer Institute, Slovakia

[P3.053] Photo-thermal actuation of ethylene vinyl acetate nanocomposites filled with carbon nanotubes K. Czaniková*1, I. Krupa2, M. Omastová1, 1Polymer Institute Slovak Academy of Sciences, Slovakia, 2Qatar University, Qatar

[P3.054] Degradation studies of spray coated polymer films using cantilever sensors K. Almdal*, S.S. Keller, T.S. Alstrøm, A. Boisen, S. Bose, Technical University of Denmark, Denmark

[P3.055] Role of Thermal Treatment on Porosity a Clay-Based Raw Material : Image Processing and 2-D Numerical Simulation. D. Buncianu*1 ,3, N. Tessier-Doyene3, F. Courreges2, J. Absi3, M. Jadaneant1, 1University Politehnica Timisoara, Romania,

2Laboratory XLIM, 123, avenue Albert Thomas 87060 Limoges cedex, France, France, 3Laboratory SPCTS – European Center of Ceramics, 12 rue Atlantis 87068 Limoges cedex (France), France

[P3.056] Glauber salt charged superabsorbents as thermal energy storage materials O.F. Ensari*1, C. Alkan1, 1Amasya University, Turkey, 2Gaziosmanpasa University, Turkey

[P3.057] On the structural and thermal features of novel 4-methyl-1-pentene copolymers with uncommon microstructures by C2 symmetric metallocenes P. Stagnaro*1, S. Losio1, L. Fantauzzi1, R. Utzeri1, M.C. Sacchi1, M. Galimberti2, D. Cavallo3, G.C. Alfonso3, 1ISMAC-CNR, Italy, 2Polytechnic of Milano, Italy, 3University of Genova, Italy

[P3.058] Electrical conductivity and optical transmittance properties of carrageenan and chitosan biofilm composites with


graphene oxide and carbon nanotubes S. Kara*1, E. Arda1, O. Pekcan2, 1Trakya University, Turkey, 2Kadir Has University, Turkey

[P3.059] Composites of elemental sulfur/thermoplastics S.M. Alhassan, The Petroleum Institute, United Arab Emirates

[P3.060] Fast-scanning calorimetry of electrospun polyamide nanofibers: the importance of heating rate I. Steyaert*1 ,2, G. Van Assche2, H. Rahier2, K. De Clerck1, 1Ghent University, Belgium, 2Vrije Universiteit Brussel, Belgium

[P3.061] Exploring possibilities of viscometry and velocity sedimentation methods on samples of linear pullulan standards. Hydrodynamic study A.S. Gubarev*1, O.V. Okatova2, G.M. Pavlov1 ,2, 1St. Petersburg State University, Russia, 2Institute of Macromolecular Compounds, Russia

[P3.062] New routes to functionalised carbon black and silica polypropylene nanocomposites C. Shepherd*, E. Hadzifejzovic, J.S. Foord, M.G. Moloney, E.M. Parker, J. Moghal, M. Sawangphruk, University of Oxford, UK

[P3.063] Depolymerization process for Polypropylene and Polyethylene using the d-limonene as solvent E. Silva*, C. Melo, V. Garuffi, A. Feu, Federal University of Espirito Santo, Brazil

[P3.064] Synthesis and characterization of macroporous resins from poly(4-vinylpyridine) and divinylbenzene functionazed by sulfobetaine groups J. Cardoso, J.A. Arcos*, Universidad Autónoma Metropolitana, Mexico

[P3.067] NMR Relaxometry Evaluation of PVAL/MMT nanomaterials A.P.C.B. Cunha, M.I.B. Tavares, E.O. Silva*, P.J.O. Sebastiao, IMA-UFRJ, Brazil

[P3.068] Optimization of synthesis of PNIPA-clay nanocomposite hydrogels B. Strachota*, A. Zhigunov, J. Hodan, J. Spevacek, R. Konefal, L. Matejka, Institute of Macromolecular Chemistry, Academy of Sciences of the Czech Republic v.v.i., Czech Republic

[P3.069] Highly toughened polylactide-based thermoplastic vulcanizates with tunable toughness with fully biobased unsaturated polyesters G.C. Liu*, Y.S. He, S.C. Chen, J.B. Zeng, Y.Z. Wang, Sichuan University, China

[P3.070] Electron paramagnetic resonance study of the impurities in the Al2O3, mullitte and ZrO2 powders used in the aerospace industry for high temperature applications I. Stefaniuk*, I. Rogalska, University of Rzeszów,, Poland

[P3.071] Electron paramagnetic resonance study of pbmni2 nanocrystals embedded in polyvinyl alcohol matrices in X-band and Q-band I. Stefaniuk*1, I. Rogalska1, A.I. Savchuk2, I.D. Stolyarchuk2, M. Marchewka1, D. Ploch1, E.M. Sheregii1, 1University of Rzeszow, Poland, 2Chernivtsi National University, Ukraine

[P3.072] Temperature-responsive nano-objects from acrylate diblock copolymers via raft-mediated polymerization-induced self-assembly B.E. McKenzie*, S.P. Armes, University of Sheffield, UK

[P3.073] Smart polyaniline nanoparticles with thermal and photothermal sensitivity. C.A. Barbero*1, S. Bongiovanni Abel1, M.A. Molina3, E.I. Yslas1, C.R. Rivarola1, M.J. Kogan2, M.C. Miras1, 1Universidad Nacional de Rio Cuarto, Argentina, 2Universidad de Chile, Chile, 3Free University Berlin, Germany

[P3.074] Polymeric hydrogels loaded with hydrophobic chelating agents for solid phase extraction and sensing of ions C.A. Barbero*, M.V. Martinez, A. Baena Moncada, C.R. Rivarola, M.C. Miras, Universidad Nacional de Rio Cuarto, Argentina

[P3.075] Dispersion of functionalized silica micro and nanoparticles into poly(nonamethylene azelate) by ultrasonic micro-molding. A. Díaz*, M.T. Casas, J. Puiggalí, Universitat Politècnica de Catalunya, Spain

[P3.076] Study on the crystallization of multiarm stars with a poly(ethyleneimine) core and poly(ε-caprolactone) arms of different length. A. Díaz*, A. Bacaicoa, A. Serra, L. Franco, M.T. Casas, J. Puiggalí, Universitat Politècnica de Catalunya, Spain

[P3.077] Lithography-free nanoporous metallic layers and hybrid superlattices using block copolymer self-assembly templates C. Simao*1, M. Kreuzer1, M. Bernal-Salamanca1, M. Sledzinka1, C.M. Sotomayor-Torres1 ,2, 1ICN2, Spain, 2ICREA, Spain

[P3.078] Solvent quality analysis in the preparation of isoporous ultrafiltration membranes from block copolymers via phase inversion B. Sutisna*, K-V. Peinemann, S.P. Nunes, King Abdullah University of Science and Technology, Saudi Arabia

[P3.079] RAFT-synthesis and remarkable properties of poly(bis(trimethylsiloxy)methylsilyl methacrylate)-b-poly(methyl methacrylate) block copolymers M. Lejars*, A. Margaillan, C. Bressy, University of Toulon, France

[P3.080] Molecular interactions in metal organic frameworks (MOFs) as investigated by time-resolved FTIR spectroscopy


P. Musto*1, P. La Manna1, G. Scherillo2, G. Mensitieri2, N. Gargiulo2, D. Caputo2, 1CNR, Italy, 2Engineering Dept. Naples University, Italy

[P3.081] Poly(tri-alkylsilylester methacrylate)/poly(dimethylsiloxane) block copolymers: RAFT-mediated polymerization, characterizations and self-assembly behavior T.H. Duong1, L. Belec1, N. Canilho2, A. Margaillan1, C. Bressy*1, 1Université de Toulon, France, 2Université de Lorraine, France

[P3.082] Modelling and applications of the reaction/diffusion kinetics of two-chemistry diffusive photopolymers R.R. McLeod*, B.A. Kowalski, J.A. Noble, M.D. Alim, D.L. Forman, A.C. Urness, U of Colorado Boulder, USA

[P3.083] Design of polymer structure via controlled formation of partially-ordered states D.V. Anokhin*1 ,2, M. Defaux3, M. Rosenthal1 ,4, M. Burghammer4, D.A. Ivanov1 ,3, 1Moscow State University, Russia,

2Institute for Problems of Chemical Physics RAS, Russia, 3Institut de Sciences des Matériaux de Mulhouse (CNRS LRC 7228), France, 4European Synchrotron Radiation Facility, France

[P3.084] Highly conductive ion gel self-assembled by liquid crystalline triblock copolymers in ionic liquid Y.D. Zhang, X.H. Fan, Z. Shen*, Q.F. Zhou, Peking University, China

[P3.085] The designing of a genetically engineered fusion protein for non-covalent modification of cellulose nanofiber-based biomimetic materials J-M. Malho*, M. Linder, O. Ikkala, Aalto University, Finland

[P3.086] Gamma radiation induced in situ polymerization of consolidating products for the conservation of cultural heritage manufacts S. Baccaro1, C. Casieri2, A. Cemmi*1, M. Chiarini3, V. D'Aiuto2, M.G. Tortora2, 1ENEA, Italy, 2Università de L'Aquila, Italy,

3Università di Teramo, Italy [P3.087] Molecularly imprinting polymer (MIP) as the artificial receptor in a chemosensor for lipocalin-2 determination

Z. Iskierko*1, P.S. Sharma1, D. Prochowicz2, K. Fronc3, K. Noworyta1, 1Institute of Physical Chemistry Polish Academy of Sciences, Poland, 2Warsaw University of Technology, Poland, 3Institute of Physics Polish Academy of Sciences, Poland

[P3.088] On the origin and relaxation dynamics of γ-mode in polyoxymethylene (POM) and POM based nanocomposites P.K. Karahaliou1, G.N. Tomara*1, G.C. Psarras1, S.N. Georga1, C.A. Krontiras1, J. Karger-Kocsis2 ,3, 1University of Patras, Patras, Greece, 2Budapest University of Technology and Economics, Hungary, 3MTA-BME Research Group for Composite Science and Technology, Hungary

[P3.089] ZnO/epoxy resin and BaTiO3/epoxy resin nanocomposites: development, electrical characterisation and relaxation dynamics G.N. Tomara*1, G.C. Psarras1, A. Kanapitsas2, C. Tsonos2, 1University of Patras, Greece, 2TEI Stereas Elladas, Greece

[P3.090] Photoacoustic detection method as a highly versatile and accurate tool for gas permeation measurements T. Guba1, Z. Filus1, Z. Bozoki*1, 1University of Szeged, Hungary, 2Hilase Ltd, Hungary

[P3.091] Study on conductivity mechanism for polyethylene/grapheme oxide nanocomposites S. Gao, J. Zhong, G.B. Xue, B. Wang*, Wuhan University, China

[P3.092] The dependence on thickness of the gas permeability of polymer membranes G. Firpo*, E. Angeli, L. Repetto, U. Valbusa, University of Genova, Italy

[P3.093] In situ study of deformation micromechanisms of an amorphous PET during a tensile test below and above its glass transition temperature K. Ben Hafsia*1, J.P. Tinnes1, P. Bourson2, D. Chapron2, M. Ponçot1, I. Royaud1, 1Institut Jean Lamour IJL, France,

2Laboratoire Matériaux Optiques, Photonique et Systèmes LMOPS, France [P3.094] Post-annealing of parylene D : changes in the crystallinity and the dielectric properties

M. Mokni*1 ,2, A. kahouli1 ,2, J.L. Garden3, E. André3, F. Jomni2, A. Sylvestre1, 1Univ. Grenoble Alpes, G2Elab,F-38000 Grenoble, France, 2Univ. of Tunis El Manar, (LabMOP),2092 Tunis,, Tunisia, 3Institut Néel, CNRS et UJF, France

[P3.095] Positron Annihilation Lifetime Spectroscopy study of the correlation between free volumes and gas transport in amine- modified epoxy resins R. Checchetto*1, P.N. Patil1 ,2, D. Roilo1, R.S. Brusa1, A. Miotello1, R. Ferragut3, S. Anghion3, 1Dipartimento di Fisica dell’Università di Trento, Italy, 2National Research Council, Italy, 3Politecnico di Milano, Italy

[P3.097] Solventless processing of polymer semiconductors G. Bernardo*1, D. Nabankur2, P. Pereira1, L. Hilliou1, J.A. Covas1, J. Viana1, J.P. de la Cruz3, D.G. Bucknall2, 1University of Minho, Portugal, 2Georgia Institute of Technology, USA, 3University of Porto, Portugal

[P3.098] Block copolymers for optical nanowriting and data storage: dynamic responses and matrix heterogeneity over different length- and time-scales L. Andreozzi, G. Galli, D. Palazzuoli*, F. Zulli, Università di Pisa, Italy

[P3.099] When the tail wags the dog: solution-crystallisation of polyfluorenes A. Perevedentsev*1, K. Feldman2, P.N. Stavrinou1, D.D.C. Bradley1, P. Smith2, 1Imperial College London, UK, 2ETH Zürich, Switzerland

[P3.100] Dip-pen patterning of poly(9,9-dioctylfluorene) chain-conformation-based nanophotonic elements


A. Perevedentsev*, Y. Sonnefraud, C.R. Belton, S. Sharma, A.E.G. Cass, S.A. Maier, J-S. Kim, P.N. Stavrinou, D.D.C. Bradley, Imperial College London, UK

[P3.101] The kinetics of swelling in block copolymer thin films during "solvo- microwave" and solvo- thermal annealing: The effect of vapour pressure P. Mokarian-Tabari*1 ,2, T.W. Collins1, C. Cummins1, C. Siamo3, C.M. Sotomayor Torres3 ,4, M.A. Morris1 ,2, 1University College Cork and Tyndall National Institute, Ireland, 2Trinity College Dublin, Ireland, 3ICN2, Spain, 4ICREA, Spain

[P3.102] Doubled magnetomechanical response of ferrogels with bilayered magnetic elastomer inclusions E. Allahyarov*1 ,2, A. Menzel1, L. Zhu1, H. Lowen1, 1Heinrich Heine University of Dusseldorf, Germany, 2Russian Academy of Sciences, Russia, 3Case Western Reserve University, USA

[P3.103] Coupled CFD-BPE modelling of polymerization process in a tubular three-dimensional reactor V.F. De Felice*, P.F. Oliveira, R.A.F. Machado, UNiversidade Federal de Santa Catarina (UFSC), Brazil

[P3.104] Post-consuming extruded polystyrene food packaging recycling P.F. Oliveira*, V.F. De Felice, R.A.F. Machado, Federal University of Santa Catarina, Brazil

[P3.105] Dynamic response of polymers and polymer nanocomposites for impact resistance T. Cagin*1 ,2, J. Njoroge1, B. Arman2, A. Chakrabarty2, 1Texas A&M University, USA, 2Texas A&M University, American Samoa

[P3.106] Empirical and semi-empirical study of aminophylline drug delivery from nanocomposite hydrogels based on PVP M. adimi*1, M. heidarinaghdeali2, 1Farahan Branch, Islamic Azad University, Iran, 2Farahan Branch, Islamic Azad University, Iran

[P3.107] Bending rigidity of polyelelctrolyte brush monolayer S. Yang*, Z. Lei, E.Q. Chen, Peking University, China

[P3.108] Poly(p-dioxan-2-one-co-butylene-co-succinate) copolyesters: one-step enzymatic synthesis, characterization and dendritic crystallization W.C. Nie*, H.C. Dang, F. Song, Y.Z. Wang, X.L. Wang, sichuan university, China

[P3.109] Short carbon fiber reinforced polymer-matrix composites. D.I. Chukov*, A.A. Stepashkin, K.V. Kuskov, V.V. Tcherdyntsev, National University of Science and Technology “MISIS”, Russia

[P3.110] Novel polymer matrix composites for endoprosthesis. D.I. Chukov*, A.V. Maksimkin, F.S. Senatov, K.S. Mostovaya, S.D. Kaloshkin, National University of Science and Technology “MISIS”, Russia

[P3.111] Novel wholly aromatic poly(ether-amide)s with different numbers of ether bonds Z. WQ*, W. YZ, W. XL, L. GC, Sichuan University, China

[P3.112] Modified polymer nanofibers to capture mycobacteria L. Cronje*, L. Fortuin, A. du Plessis, Stellenbosch University, South Africa

[P3.113] Photo-thermal resistivity response of polyisoprene/nanographite composites M. Knite*1, K. Ozols1, A. Fuith2, I. Aulika3, R. Orlovs1, 1Riga Technical University, Latvia, 2University of Vienna, Austria,

3ELTEK Group, Italy [P3.114] Hydroxyapatite and unsaturated carboxylic acids as a new coagents in peroxide crosslinking of ethylene-octene

copolymer M. Pingot*, A. Strakowska, M. Maslowski, M. Zaborski, Lodz University of Technology, Poland

[P3.115] Design, development and characterization of scaffolds with potential applications in tissue engineering M.V. Chaud*, M.A. Rebelo, T.F. Ribeiro Alves, P. Severino, K.S. Pontes, B.A.C. Fogaça, J.M. Oliveira Junior, N. Aranha, R. Lima, V.M.H. Yoshida, University of Sorocaba, Brazil

[P3.116] Activity of chosen metal acetylacetonates in copolymerization of 3-bromopropyl 5-methyl-2-oxo-1,3-dioxane-5-carboxylate M. Kawalec*, M. Pastusiak, J. Jaworska, H. Janeczek, P. Kurcok, P. Dobrzynski, Polish Academy of Sciences, Poland

[P3.117] Characterisation of melt rheological properties of PMMA/ONi-Al LDH nanocomposites synthesized by solvent blending method M. Kumar*, V. Chaudhary, K. Suresh, G. Pugazhenthi, Indian Institute of Technology Guwahati, India

[P3.118] Photo-responsive polymeric vesicles containing spironaphthoxazine moiety M.R. Kim*, R. Dogra, I.W. Cheong, Kyungpook National University, Republic of Korea

[P3.119] (Co)Poly(α-bromo-ε-caprolactone) – synthesis, characterization and modifications P. Komar*1 ,2, M. Kawalec1, M. Pastusiak1, J. Jaworska1, P. Kurcok1 ,2, 1Polish Academy of Sciences, Poland, 2Jan Dlugosz University, Poland

[P3.120] Cutinase-catalyzed functionalization of poly(L-lactic acid) membranes for increased biocompatibility S. Vecchiato*1, E. Herrero Acero1, A. Pellis2, C. Caparrós3 ,4, G.S. Nyanhongo2, G.M. Guebitz1 ,2, 1ACIB GmbH, Austria,

2University of Natural Resources and Life Sciences, Austria, 3Universidade do Minho, Portugal, 4Technical University of Catalonia (UPC), Spain


[P3.121] Green synthesis of microcapsules for controlled release of natural active substances M.M. Sánchez-Navarro*, M.A. Pérez-Limiñana, F. Arán-Ais, C. Orgilés-Barceló, INESCOP, Spain

[P3.122] Obtaining valuable gelatine derivatives from rendered products M.A. Pérez-Limiñana, M.J. Escoto Palacios, M.M. Sánchez-Navarro*, F. Arán-Ais, C. Orgilés-Barceló, INESCOP, Spain

[P3.123] Valorisation of untanned bovine wastes for hidh value microencapsulated products M.A. Pérez-Limiñana*, M.J. Escoto-Palacios, F. Arán-Ais, C. Orgilés-Barceló, INESCOP, Spain

[P3.124] Influence of the sol-gel catalyst and the synthesis route in morphology of silver-silica nanocomposites (Ag@SiO2) M.A. Pérez-Limiñana*, F. Arán-Ais, C. Orgilés-Barceló, INESCOP, Spain

[P3.125] Production peculiarities of oligoboronorganosilazanes and quasi-crystalline Si-(B)-C-N ceramics on their base. O.G. Ryzhova1, P.A. Storozhenko1, Z.R. Bagautdinova*1, A.N. Polivanov1, E.L. Gurkova1, A.I. Drachev1, I.A. Timofeev1, P.A. Timofeev1, S.N. Dugin1, M.G. Kuznetsova1, S.V. Zukova1, 1FSUE GNIIChTEOS, Russia, 2JSC Kompozit, Russia

[P3.126] Basalt fibres as a reinforcement of bio-polyamide matrix P. Kuźniar*, S. Kuciel, P. Jakubowska, Cracow University of Technology, Poland

[P3.127] Biodegradable functional polycarbonates for medical applications J. Jaworska*, M. Pastusiak, M. Kawalec, P. Dobrzynski, P. Kurcok, H. Janeczek, Polish Academy of Sciences, Poland

[P3.128] Synthesis and characterization of novel bioresorbable copolymers based on functional carbonate: benzyl 5-methyl-2-oxo-1,3-dioxane-5-carboxylate (MTC-Bz) M. Pastusiak*, M. Kawalec, J. Jaworska, H. Janeczek, P. Kurcok, P. Dobrzynski, Polish Academy of Sciences, Poland

[P3.129] The double encapsulation of bioactive molecules using the electrospraying method with the possibility of the drug controlled release A. Saman*, P. Mikes, A. Klapstova, J. Horakova, V. Jencova, Technical university of Liberec, Czech Republic

[P3.130] Influence of the maleamic acids on the crosslinking of the natural rubber P. Dmowska-Jasek*, A. Smejda-Krzewicka, W.M. Rzymski, Lodz University of Technology, Poland

[P3.131] New method of crosslinking isoprene rubber using tetraalkyl thiuram disulfides P. Dmowska-Jasek*, A. Smejda-Krzewicka, W.M. Rzymski, Lodz University of Technology, Poland

[P3.132] Millimetre-scale alignment of polymer self-assembly by halogen bonding and mesogen stacking N. Houbenov1, R. Milani*2, M. Poutanen1, J. Haataja1, V. Dichiarante3, J. Sainio1, J. Ruokolainen1, G. Resnati3, P. Metrangolo2 ,3, O. Ikkala1, 1Aalto University, Finland, 2VTT Technical Research Centre of Finland, Finland, 3Politecnico di Milano, Italy

[P3.133] Magnetic field effects on copper-catalyzed ATRP of styrene J. Zhou*1, D. He2, Y.G. Liao1, Z.G. Xue1, X.L. Xie1, 1Huazhong University of Science and Technology, China, 2Jianghan University, China

[P3.134] Surface Modification of poly(dimethyl siloxane) by interpenetrating polymer network formation in the proximal layer of polymer surface S. Ghoreishi*, M. Ahmadnezhad, Sahand University of Technology, Iran

[P3.135] In vitro cytotoxicity of poly(Urea-Urethane) nanocapsules by miniemulsion polymerization for drug delivery application A. Valério*, P.H.H. Araújo, C. Sayer, UFSC, Brazil

[P3.136] Bioengineered spider silk - an intelligent biopolymer for drug delivery applications K. Jastrzebska*1 ,3, A. Florczak1 ,3, Y. Lin2, R. Abbott2, A. Mackiewicz3 ,4, D.L. Kaplan2, H. Dams-Kozlowska3 ,4, 1Adam Mickiewicz University, Poland, 2Tufts University, USA, 3University of Medical Science, Poland, 4Greater Poland Cancer Centre, Poland

[P3.137] Comparison of electrospun fibrous materials from polycaprolactone (PCL) and polylactide-polycaprolactone copolymer (PLC) for small diameter blood vessel tissue engineering A. Klapstova, A. Saman, V. Jencova, P. Mikes, L. Blazkova*, Technical university of Liberec, Czech Republic

[P3.138] Enhancing the thermal stability and controlling the diffusivity of essential oils in polyethylene films A. Ophir*, R. Efrati, A. Dotan, S. Kenig, M. Natan, E. Banin, Shenkar College of Engineering and design, Israel

[P3.139] Circulating nucleic acid (CNA) separation from serum by electrospun membranes T. Isik*1, M. Demir1, U.H. Yildiz1, N. Horzum Polat2, 1Izmir Institute of Technology, Turkey, 2Izmir Katip Çelebi University, Turkey

[P3.140] Nano-colloid printing of functional PLA-b-PEO copolymers for creation of multi-functional biomimetic surfaces of PLA based biomaterials E. Mazl Chanova*1, P. Knotek2, Y. Yang3, J. Havlikova4, L. Machova1, O. Janouskova1, V. Proks1, J. Kucka1, L. Bacakova4, F. Rypacek1, 1Institute of Macromolecular Chemistry ASCR, Czech Republic, 2University of Pardubice, Czech Republic, 3Keele University, UK, 4Institute of Physiology ASCR, Czech Republic

[P3.141] Synthesis and characterization of poly (etilenglicolmetacrilato) and its potential application as polymer


electrolyteJudith Cardoso1, Dora Nava1, Gregorio Guzmán1 e Ignácio González2.1.Depto de Física y 2. Depto de Química, DCBI, UAMI J. Cardoso*, D. Nava, G. Guzmán, I. González, Universidad Autónoma Metropolitana, Mexico

[P3.142] Nanocomposites for battery applications as polymer electrolytesAlfonso Mayrén1, Judith Cardoso1, Issis Romero-Ibarra2, Dora Nava1, and Ignacio González21 Departmento de Física. DCBI, UAMI.2 Departmento de Química. DCBI, UAMI. E-mail [email protected] A. Mayrén*, J. Cardoso, I. Romero-Ibarra, D. Nava, I. González, Universidad Autónoma Metropolitana, Mexico

[P3.143] Study of effect of an oxidizing agent on the degradation of polypropylene bag submited to accelerated aging F. Djerada née Larfi*1, D. Amokrane2, K.K. Bentifour3, S. Kaddour4, 1bejaia university, Algeria, 2Algeria petroleum institute, Algeria, 3SASACE industry, Algeria, 4USTHB, Algeria

[P3.145] An investigation into the characterization of polyphenylene sulphide (PPS) using multi detection gel permeation chromatography A. Brookes*1, A. Boborodea2, 1Agilent Technologies LDA UK Limited, UK, 2Certech ASBL Belgium, Belgium

[P3.146] Shape Memory Nanocomposites Based on Epoxy Resin S. Ponyrko*, L. Matějka, Institute of Macromolecular Chemistry AS CR, v.v.i., Czech Republic

[P3.147] Ionic liquid additives for innovative polymeric materials with candida sp. Antibiofilm properties C. Martins Leal Schrekker*, K.Z. Donato, V.Z. Bergamo, R.K. Donato, R. Santos Mauler, A. Meneghello Fuentefria, H.S. Schrekker, A.M. Dalbem, Universidade Federal do Rio Grande do Sul, Brazil

[P3.148] Research of impact resistance of multilayered composite barrier impregnated by a nanocomposite fluid A.M. Bragov1, A.Y. Konstantinov1, A.K. Lomunov*1, F.K. Antonov2, P.A. Mossakovsky2, M.Y. Ryazantseva2, 1Lobachevsky State University of Nizhny Novgorod, Russia, 2Moscow State University, Russia

[P3.149] Injectable CMC/pullulan hydrogel as an absorbable anti adhesion agent S. Bang*1, K.R. Park2, W.I. Kim2, O.H. Kwon1, B.N. Kim1, S.H. Han1, S.R. Kim1, 1Kumoh National Institute of Technology, Republic of Korea, 2R&D Center,Wonbiogen Ltd., Republic of Korea

[P3.150] Bioabsorbable nanofibrous mats containing blood clotting agents for use as hemostatic agents E.J. Sim*1, S.J. Kim2, E.J. Kim2, O.H. Kwon1, 1Kumoh National Institute of Technology, Republic of Korea, 2M.I.Tech Co., Ltd, Republic of Korea

[P3.151] Modulation of biodegradability of PLGA nanofibrous scaffold by electron beam irradiation for soft tissue regeneration J.B. Lee*1, B.N. Kim2, B.C. Lee2, O.H. Kwon1, 1Kumoh National Institute of Technology, Republic of Korea, 2Korea Atomic Energy Research Institute, Republic of Korea

[P3.152] High strain-rate deformation of aramid-epoxy composite A.M. Bragov1, L.A. Igumnov1, S.Y. Litvinchuk1, A.K. Lomunov*1 ,2, T.S. Lomunova2, M.Y. Ryazantseva3, 1Lobachevsky State University of Nizhny Novgorod, Russia, 2Nizhny Novgorod State University of Architecture and Civil Engineering, Russia,

3Moscow State University, Russia [P3.153] Fabrication and evaluation of enzyme-mediated injectable alginate hydrogel for application to wound dressing

S.W. Lee*, O.H. Kwon, Kumoh National Institute of Technology, Republic of Korea [P3.154] Lightweight super-ductile polymer blends through microcellular injection molding of polymer blends with nano-

dispersed morphology X. Sun, H. Kharbas, J. Peng, L-S. Turng*, University of Wisconsin–Madison, USA

[P3.155] Sample preparation free micro ATR FTIR chemical imaging of polymers and laminates M. Kansiz1, P. Scardina*2, A. Kerstan3, M. Boerger3, 1Agilent Technologies, Australia, 2Agilent Technologies, Italy, 3Agilent Technologies, Germany

[P3.156] Development of graphene-silk fibroin hydrogels with potential uses in bone tissue engineering M-C. Bunea*1, C. Zaharia1, P-O. Stanescu1, B. Galateanu2, E. Vasile1, A-M. Pandele1, H. Iovu1, 1University Politehnica of Bucharest, Romania, 2University of Bucharest, Department of Biochemistry and Molecular Biology, Romania

[P3.157] Superabsorbent biphasic system based on poly(lactic acid) and poly(acrylic acid) L. Sartore, S. Pandini*, F. Baldi, F. Bignotti, University of Brescia, Italy

[P3.158] One-way and two-way shape memory properties of electrospun semicrystalline networks based on sol-gel crosslinked poly(ε-caprolactone) S. Pandini*1, S. Agnelli1, A. Merlettini2, C. Gualandi2, M.L. Focarete2, M. Toselli2, K. Paderni3, M. Messori3, 1Università degli Studi di Brescia, Italy, 2Università degli Studi di Bologna, Italy, 3Università degli Studi di Modena e Reggio Emilia, Italy

[P3.159] Biobased furandicarboxylic acids (FDCAs): effects of isomeric substitution on polyester synthesis and properties S. Thiyagarajan*1 ,2, W. Vogelzang1 ,2, R.J.I. Knoop1, A.E. Frissen1 ,2, J. van Haveren1 ,2, D.S. van Es1 ,2, 1Wageningen University and Research Centre, The Netherlands, 2Dutch Polymer Institute, The Netherlands

[P3.160] Methacrylate modified halloysite used in inflammatory bowel diseases treatment A. Ghebaur*, S.A. Garea, H. Iovu, University POLITEHNICA of Bucharest, Romania


[P3.161] Asymmetric Block Copolymer Isoporous Membranes-Complexation with Silver and Gold P. Madhavan*, P.Y. Hong, K-V. Peinemann, S.P. Nunes, KAUST, Saudi Arabia

[P3.162] Effect of nanoreinforcements on biodegradable starch-based composites B. Montero*, M. Rico, L. Barral, R. Bouza, Universidade da Coruña, Spain

[P3.164] Homoporous membranes by selective swelling of solvent-annealed amphiphilic block copolymers L.M. Guo, J. Yin, Y. Wang*, Nanjing Tech University, China

[P3.165] Robust mesoporous membranes by selective swelling of triblock copolymers with rubbery moieties Z.G. Wang*, Y. Wang, Nanjing Tech University, China

[P3.166] Homoporous membranes with tunable straight pores by ethanol treatment on polystyrene-block-poly(2-vinylpyridine)/ poly(2-vinylpyridine) homopolymer blending films W. Sun, Z.G. Wang*, Y. Wang, Nanjing Tech University, China

[P3.167] Synthesis of cubic iron oxide nanoparticles functionalized with thermo-responsive polymers for applications in hyperthermia and smart drug delivery systems T.B. Mai*, D. Niculaes, M.J. Barthel, H. Kakwere, T. Pellegrino, Istituto Italiano di Tecnologia, Italy

[P3.168] Effect of biodegradable plasma polymer coating on in vivo biodegradation of Mg K. Bazaka*, C. Moran, M.V. Jacob, James Cook University, Australia

[P3.169] Studies of surface modifications for some partial cycloaliphatic polyimides films after polychromatic irradiation for biomedical applications D. Popovici*1 ,2, D. Rosu1, C. Hulubei1, L. Rosu1, D.S. Vasilescu2, 1Petru Poni Institute of Macromolecular Chemistry, Romania, 2University politehnica from Bucharest, Romania

[P3.170] Synthesis of partially alicyclic copolyimides and characterization of surface modified films for biomedical applications D. Popovici*1 ,2, C. Hamciuc1, D.S. Vasilescu2, 1"Petru Poni" Institute of Macromolecular Chemistry, Romania, 2University "Politehnica" from Bucharest, Romania

[P3.171] Multifunctional properties of textile materials modified by organosilicon compounds J. Walentowska*1, J. Flaczyk1, M. Przybylak2, H. Maciejewski2, 1Institute of Natural Fibres & Medicinal Plants, Poland,

2Adam Mickiewicz University Foundation, Poland [P3.172] Flammabilty of composites filled with modified natural fibres and halogen-free fire retardants

S. Rojewski*1, R. Gasiorowski1, D. Wesolek1, W. Gieparda1, K. Bujnowicz1, M. Wladyka-Przybylak1, H. Maciejewski1 ,2, R. Wojcik1, 1Institute of Natural Fibres & Medicinal Plants, Poland, 2Poznan Science and Technology Park, Poland

[P3.173] Ionic liquid in antimicrobial modification of electrospun nanofibers J. Foksowicz-Flaczyk*, J. Walentowska, W. Gieparda, D. Wesolek, Institute of Natural Fibres and Medicinal Plants, Poland

[P3.174] Effect of natural fibres silanization on composites flammability and biodeterioration R. Gasiorowski*1, S. Rojewski1, J. Walentowska1, J. Foksowicz-Flaczyk1, D. Wesolek1, H. Maciejewski1 ,2, K. Bujnowicz1, R. Wojcik1, 1Institute of Natural Fibres & Medicinal Plants, Poland, 2Poznan Science and Technology Park, Poland

[P3.175] Self-Healing Polymers in Self-Assembled Nacre-Mimetics allow Outstanding Structural Definition, Transparency and Supramolecular Control over Mechanical Properties B. Zhu*, M. Noak, A. Walther, DWI-Leibniz Institute for Interactive Materials, Germany

[P3.176] Electrochemically synthesized molecularly imprinted polymer as the recognition unit of potentiometric chemosensor for neopterin cancer biomarker P.S. Sharma*1, A. Wojnarowicz1, M. Sosnowska1, F. D'Souza3, W. Kutner1 ,2, 1Institute of Physical Chemistry Polish Academy of Sciences, Poland, 2Cardinal Stefan Wysznski University in Warsaw, Poland, 3University of North Texas, USA

[P3.177] Self-Cleaning Electrochromic Polymer Surfaces and Optimization M. Yildirim*, A. Caglar, G.E. Ozel, U. Cengiz, I. Kaya, Canakkale Onsekiz Mart University, Turkey

[P3.178] Cationic lipid-embedded poly(acrylic acid) gel layer coated on magnetic core particle capable of undergoing ph-induced modulation of lipid assembly architecture for controlled drug release and mr imaging contrast H-C. Chiu*1, Y-F. Huang2, W-C. Huang1, W-H. Chiang1, 1National Tsing Hua University, Taiwan, 2National Chung Hsing University, Taiwan

[P3.179] Polyboramines as hydrogen reservoirs A. Ledoux*, P. Larini, J. Raynaud, E. Lacôte, Université Claude Bernard Lyon1, France

[P3.180] Araucaria araucana starch: Relationship between its structural characteristics and mechanical properties of thermoplastic material prepared from it J. Castaño*1, S. Rodríguez1, 1University of Concepcion, Chile, 2Research Center of Advanced Polymers (CIPA), Chile

[P3.181] Horse chestnut starch: a novel raw material ofnon-edible source for applications in the bioplastic industry J. Castaño*1, S. Rodríguez1, 1University of Concepcion, Technological Development Unit (UDT), Chile, 2Research Center of Advanced Polymers (CIPA), Chile

[P3.182] Kinetic extraction, separation, recovery and trace determination of Lanthanum(III) with p-nitrocalix(6)arene hydroxamic acid by inductively-coupled plasma-mass spectrometry (ICP-MS)


J. Shah, C.U.Shah Science College, India [P3.183] FTIR spectroscopic investigation of the structure influence of phenolic antioxidants on polystyrene photodegradation

C. Zeddam*1 ,2, N. Belhaneche-Bensemra2, L. Tighzert3, 1Université Saad Dahleb de Blida, Algeria, 2Ecole Nationale Polytechnique,, Algeria, 3Ecole Supérieure d'Ingénieurs en Emballage et Conditionnement (ESIEC), France

[P3.184] Behaviour the concrete columns wrapped with fiber reinforced polymers A. Dautaj*, N.K. Kabashi, C.K. Krasniqi, University of Prishtina, Albania

[P3.185] Mechanical and physical properties of nanosilica/ nitrile butadiene rubber composites cured by gamma irradiation D.E. Abulyazied*1, H.M. Essa2, M. Abdulrahman1, H.A. Youssef1, 1NCRRT, Egypt, 2Radiation Chemistry Dept., National Centre for Radiation Research and Technology (NCRRT), Egyptian Atomic energy Authority, Egypt

[P3.186] Synthesis, analysis and application of poly methyl methacrylate – urushiol methacrylate random copolymers N. Lone*1, J. Joo1, M. Cho2, I.W. Cheong1, Y.K. Hong3, 1Kyungpook National University, Republic of Korea, 2Chonbuk National University, Republic of Korea, 3Pukyong National University, Republic of Korea

[P3.188] Novel rubbery wound closure adhesives: Design, synthesis, characterization, and testing of polyisobutylene-containing cyanoacrylate homo- and co-networks I. Szanka1, A. Szanka1, J. Kennedy1, S. Sen3, N. Nugay*2, 1The University of Akron, USA, 2Bogazici University, Turkey,

3Yalova University, Turkey [P3.189] Sensors and switches based on polymer brushes with adsorption-active minority chains: theory and MC simulations

L.I. Klushin*1, A.M. Skvortsov2, A.A. Polotsky3, S. Qi4, F. Schmid4, 1American University of Beirut, Lebanon, 2Chemical-Pharmaceutical Academy, Russia, 3Institute for Macromolecular Comp. Rus. Acad. Sci., Russia, 4Johannes-Gutenberg University, Germany

[P3.191] Evaluation of asphaltenes phase behavior by atomic force microscopy J-N. Figueira*, B-G. Soares, R-A. Simão, E-F. Lucas, Universidade Federal do Rio de Janeiro, Brazil

[P3.192] Stability of foams and thin films made from pure silicone block-copolymer melts T.G. Gaillard1, M.R. Roché1 ,2, T.V. Voisin1, C.P. Poulard1, C.H. Honorez1, L.C. Champougny1, E.R. Rio1, W.D. Drenckhan*1, 1Laboratoire de Physique des Solides, France, 2Laboratoire Matière et Systèmes Complexes, France

[P3.193] A preliminary study of electrospun zein fibers S.J.V. Torres, E.C. Corradini*, UTFPR, Brazil

[P3.194] Polymerization-enhanced intersystem crossing X. Sun, W. Chen, P. Wang, X. Li, G. Zhang*, University of Science and Technology of China, China

[P3.195] Composite Hydrogel of Poly(1,3-dioxolane) R. Fatiha*, B. Nabahat, B. Mohamed, university of Oran, Algeria

[P3.196] Utilization of waste polymers in synthesis of corrosion inhibitors C. Seckin*, Y. Dusova-Teke, E. Yonel-Gumruk, Turkish Petroleum Refineries Corporation, Turkey

[P3.197] Investigation of semi-crystalline polymer structures with a laboratory saxs/waxs instrument. S. Desvergne-Bleneau, M. Fernández-Martínez, P. Panine, F. Bossan, S. Rodrigues*, N. Galatanu, Xenocs, France

[P3.198] Additivising niobium compound to polymer for environmental remediation P.S.O. patricio*1, A.P. Heitmann2, I.R. Coura1, P.P. Souza1, L.C.A. Oliveira2, T.P. Boaventura1, 1Centro Federal de Educação Tecnológica de Minas Gerias, Brazil, 2Universidade Federal de Minas Gerais, Brazil

[P3.199] Polysaccharide stabilized nanoparticles for paper conservation L. Amornkitbamrung*1, T. Mohan1, R. Kargl2, S. Hribernik2, P. Engel3, V. Ribitsch1, 1University of Graz, Austria, 2University of Maribor, Slovenia, 3Donau-Universität Krems, Austria

[P3.200] Effect of Inclusion BST Phase in Dielectric Properties of Biodegradable Polymer H. Manuspiya*1, K. Plungpongpan1, A. Laobuthee2, 1Chulalongkorn university, Thailand, 2Kasetsart University, Thailand

[P3.201] Hydrocolloid type wound dressing composed of Synthetic rubber and Sodium carboxymethyl cellulose S.H. Han*1, S.W. Lee1, W.I. Kim2, O.H. Kwon1, 1Kumoh National Institute of Technology, Republic of Korea, 2Wonbiogen Ltd, Republic of Korea

[P3.202] Preparation and characterization of an injectable hydrogel for prevention of post-operative adhesions. B.N. Kim*, E.J. Lee, O.H. Kwon, Kumoh National Institute of Technology, Republic of Korea

[P3.203] Novel photoswitchable azobenzene polymers: synthesis and Pd (II) absorption study M.P. Di Bello*, L. Mergola, S. Scorrano, G. Vasapollo, R. Del Sole, University of Salento, Italy

[P3.204] Molecularly imprinted composite membranes for rapid detection of 2-deoxyadenosine from urine samples S. Scorrano, L. Mergola, M.R. Lazzoi, M.P. Di Bello*, G. Vasapollo, R. Del Sole, University of Salento, Italy

[P3.205] TSH-PEGylated nanoliposomes for the efficacious thyroid targeting F. Cilurzo*1 ,7, D. Paolino1 ,7, D. Cosco1 ,7, M. Gaspari1, M. Celano1, J. Wolfram2, M.C. Cristiano1, S. Filetti4, C. Celia2 ,5, M. Ferrari2 ,6, 1University of Catanzaro, Italy, 2Houston Methodist Research Institute, USA, 3National Center for Nanoscience & Technology of China, China, 4University of Rome, Italy, 5University of Chieti, Italy, 6Weill Cornell Medical College New York, USA, 7IRC FSH University of Catanzaro, Italy


[P3.206] Polyethylene glycol (PEG)-dendron phospholipids as innovative pharmaceutical products to make super stealth liposomes for anticancer therapy M. Fresta1, 1University of Padua, Italy, 2University of Chieti-Pescara, Italy, 3Houston Methodist Research Institute, USA,

4Weill Cornell Medical College New York, USA, 5University of Catanzaro, Italy

Poster Programme Poster Session 1 Wednesday, 20 May 2015 ... · Poster Programme Poster Session 1 ....

Documents

Transcript of Poster Programme Poster Session 1 Wednesday, 20 May 2015 ... · Poster Programme Poster Session 1 ....