VA.PO.RU.SA S.p.AVia Messedaglia, 6/a - 37135 Verona ITALIATel. +39 045 504088 - Fax +39 045 580288

VA.PO.RU.SA S.r.l.Via Ferri, 6/b - 25010 Borgosatollo Brescia ITALIA

Tel. +39 030 2501753 - Fax. +39 030 2501754

info@vaporusa.com - www.vaporusa.com

Vaporusa S.p.A. was established in 1953, specializing in the distribution of products for industrial

engineering growing in the field of heating, refrigeration and steam, paying particular attention

to the line water treatment and energy. Over time, the company extends its range of products

qualifying in the areas of petrochemical and oil & gas, turning even greater interest to the

foreign market.

Competence, timeliness and reliability are the three basic requirements on which our company

has established itself as a solid reality and continues to grow, assuming a leadership position in

the national and international markets. Our highly trained staff is always available to customers

to provide fast and accurate answers, offering technical support for the selection and sizing of

products.

Vaporusa SpA has implemented a Quality Management System in accordance with the UNI EN

ISO 9001. To meet the most stringent international quality standards, even our main suppliers

are certified and our products comply with international standards such as API, ASME, DIN, EN,

ISO, UNI.

Sectors

• Oil & Gas Plant

• Petrolchimicals

• Off shores

• Rafineries

• Chemical

• Pharmaceutical

• Iron & Steel production

• Hospitals

• Process plant

• Gas compression &

Storage system

• Renevable Energy

• Pulp & Paper

• Waste treatments

• Building

• Other industrial plant

POWERDIVISIONPOWERDIVISIONPOWERDIVSION-POWERDIVISIONPOWERDIVISIONPOWERDIVI- POWERDIVISIONPOWERDIVISIONPOWERDIVISION-

Oil & Gas Plant Petrolchicals Off Shores Rafineries Pharmaceutical Iron & Steel productionHospitals Process Plant Renevable Ener Pulp&Paper Building Other industrial plWaste treatments Building Gas compression & Storage system Oil&Gas Plant Iron & Steel production

Waste treatments Building Gas compression & Storage system Oil&Gas Plant Iron & Steel productionOil & Gas Plant Petrolchicals Off Shores Rafineries Pharmaceutical Iron & Steel productionOil & Gas and Power Industries

Valves, Piping and Fittings components for

Type: Forged flangesStandards: ISO, EN, BS, ASME, API, NORSOK, AWWASize: from 1/2” to 48” Classes: from ANSI 150 to ANSI 2500, API 5000/10000,….Construction: Welding neck, Plate, Lapjoint, Threaded, Blind, Socked, Orifice, Reducing, Long welding neck Flanges, Spectacle blind, Spacers/SpadeMaterial: Carbon steel, High yield carbon steel, Alloy steel, Duplex/Super Duplex steel, Nickel alloys/Titanium, copper alloysEnds: RF, RJ

POWERDIVISIONPOWERDIVISIONPOWERDIVI- POWERDIVISIONPOWERDIVISIONPOWERDIVISION- POWERDIVISIONPOWERDIVISIONPOWERDIVI- POWERDIVISIONPOWERDIVISIONPOWERDIVI-

Pipe & Fittings Accessories Gate Globe & Check ValvesStrainers

BallButterfly & Safety Valves

Type: Carbon Steel and Stainless Steel PipeStandards/Material: A106 Gr. B, API 5L Gr. B/Gr. X52/X60/X65/X70, A/SA 333Size: from 3/8” to 48” Classes: STD, XS, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XXSConstruction: Welded and SeamlessEnds: BW, PE, Threadolet, Galvanized

Type: Butt welding fittingsStandards: ANSI B16.9, ASME B16.6, welding Bevel according to ANSI B16.25Size: from 1/2” to 48” Classes: STD, XS, 10, 20, 30, 40, 60, 80, 100, 120, 140, 160, XXSConstruction: Welded or seamlessMaterial: ASTM A 234 WPB/WPC/WP1/WP5/WP9/WP11/WP22/WP91/ WP911, ASTM A 420 WPL6 WPL3, ASTM A 403 WP, 304/304L, 316/316LEnds: BW

Type: Forged fittingsStandards: ASME B16.11, BS 3799, MSS SP 97, ASME B36.10Size: from 1/8” to 4” Classes: 3000/6000/9000, STD, XS, SCH. 160, XXSConstruction: Forged fittings, straight and reduced pipe nipples, reinforced outletsMaterial: A105, A182 (F304/F316/F51/F5/F11/F91/F22), A350 LF2, A420 WPL6, CU-NI 90/10, A694Ends: SW, BW, PE, Threadolet NPT/GAS

Type: Stud boltsStandards: ASTM, ASME, AFNOR, BS, DIN, UNI, AD WO - TRD 100 - PED (PRESSURE EQUIPMENT DIRECTIVE 97/23/CE)Size: from 3/8” to 7” Construction: Studbolts, Hexagonal Nuts, Anchor Bolts, Screws, Hex PlugsMaterial: Carbon Steels, Low - Medium - High Alloy, Austenitic Stainless Steels, Martensitic Stainless Steels, Duplex - SuperduplexTitanium, Monel - Hastelloy – Inconell, Cpper, BerilliumEnds: imperial and metric

Type: GasketsStandards: ASME B16.20a (ex API STD 601), ANSI B16.21, DIN, BS, AFNORSize: from 1/2” to 1200” Classes: from ANSI 150 to ANSI 2500, from PN6 to PN 250Construction: Spiral wound, ring joint, ribbed & flat, aramidicMaterial: stainless steel, PTFE, special steel and alloy, Chlorite minerals, ceramic fibres, graphite, rubber and main types of elastomerEnds: FF, RF, RJ

Type: Gate, Globe, Check, Piston/Ball/Swing Check Valves & Valvo Power reduced and full bore, strainersStandards: BS 1873, API 600, ASME B16.34 BS 1414, BS 1868, API 6DSize: from 2” to 48” Classes: from ANSI 150 to ANSI 2500Construction: Bolted Bonnet, Cryogenic extended Bonnet, BellowSeal, Pressure SealMaterial: carbon steel, stainless steel, alloys, special alloys (e.g.Monel®, Inconel®, Hastelloy®, Duplex®, Superduplex®, …)Ends: Flanged ASME B16.5 from 2” to 24”, ASME B16.47 from 26” to 48”, BW ends to ASME B16.25

Type: Gate, Globe, Check, Piston/Ball/Swing Check Valves & Valvo Powerreduced and full bore, strainersStandards: API 602, BS 5352, ISO 15761, ASME B16.11, ASME B1.20.1, ASME B16.25, API 598-BS 6755Size: from 1/2” to 2”Classes: from ANSI 150 to ANSI 2500Construction: OS&Y, ISRS, Y, Angle, Bellows Seal, Cryogenic, Bonnet-less, Pressure SealMaterial: carbon steel, stainless steel, alloys, special alloys (e.g.Monel®, Inconel®, Hastelloy®, Duplex®, Superduplex®,…)Ends: Flanged (Raising or Flat Face), Ring Joint, Socket Weld, Butt Welding

Type: Wafer check valvesStandards: API 594, ANSI B16.34, API 6DSize: from 2” to 36” Classes: from ANSI 150 to ANSI 600Construction: Tilting WaferMaterial: carbon steel, stainless steel, alloys, special alloys (e.g.Monel®, Inconel®, Hastelloy®, Duplex®, Superduplex®,…)Ends: 2” ~ 24” to ANSI B16.5, 26” ~ 36” to MSS-SP-44or to API605/ASME B16.47

Type: Ball valveStandards: API 6D, API 6A, ASME B. 16.47,ASME B16.34,ASME B16.10, BS 5351 Size: from 1/2” to 48” Classes: from ANSI 150 to ANSI 2500, API 30005000/10000 psiConstruction: Floating, Trunnion Mounted, Three Ways, Double Block & Bleed, CryogenicMaterial: carbon steel, stainless steel, alloys, special alloys(e.g.Monel®, Inconel®, Hastelloy®, Duplex®, Superduplex®,…)Ends: RF, RJ, HUB, BW

Type: Butterfly valvesStandards: EN 558 ( DIN 3202 T3 1), ISO 5752 (DIN 3202 T3 K1), API 609, BS 5155 , NF E 29-305.1Size: from 3/4” to 48” Classes: from ANSI 150 to 600Construction: Double-eccentric, Soft seated, Material: Carbon steel, stainless steel, soft iron and special alloys (e.g.Monel®, Inconel®, Hastelloy®, Duplex®, Superduplex®,…)Ends: ANSI B16.5, MSS SP-44, API 605/ASME B16.47, JIS

Type: Safety valvesStandards: API 520/526/527, ISO 4126-1, ASME VIII D.1, ASME 16.34Size: from 1/2” to 10” Classes: from ANSI 150 to ANSI 2500Construction: Angular type, full nozzle, spring loaded, conventional or balancedMaterial: Carbon steel, stainless steel and special alloysEnds: Inlet 150 to 2500