Portable Power Tools Safety and Use. Portable Power Tools Cordless Drills/Drivers Corded Drills...
-
Upload
patience-howard -
Category
Documents
-
view
213 -
download
0
Transcript of Portable Power Tools Safety and Use. Portable Power Tools Cordless Drills/Drivers Corded Drills...
Portable Power Tools
Safety and Use
Portable Power Tools
Cordless Drills/Drivers Corded Drills Random Orbit Sander Dual Action Sander Jigsaw Circular Saw
Basic Rules Always wear Safety Glasses Always ask Instructor’s Permission Always secure the work piece Always UNPLUG tool before making
adjustments or changing Blades Always keep hands 2” from cutter or blade Always use two hands on Tool Always remove/tie loose clothes, hair, or
jewelry Never cut used wood containing nails/screws
Cordless Drills/Drivers
Make sure Chuck is tight and bit is properly installed
Uses:• Drill/Driver – drilling and driving screws
• Driver – driving screws
ALWAYS use the lowest speed setting when driving screws
ALWAYS use the highest speed setting when drilling wood
Variable Speed Trigger
Speed Switch
Clutch
Keyless Chuck
Reverse Switch
Corded Drills
Make sure Chuck is tight and bit is properly installed – must use a Chuck Key
Uses:• Drilling Wood or metal
ALWAYS use the lowest speed setting when drilling metal
ALWAYS use the highest speed setting when drilling wood
Never pick up the tool by the cord
Keyed Chuck
VS Trigger
Reversing Switch
Trigger Lock
Chuck Key
Keyless Chuck
Jig Saws
Always keep base firmly against work piece
Always secure work piece Always use two hands to hold the Jig
Saw Always make relief cuts when cutting a
small radius Never pick up the tool by the cord
Orbit Control
Keyless Blade
Change
Base
Trigger and Speed Control
Trigger Lock
Dual Action/Orbital Sander
Always make sure Sand Paper is securely attached
Always keep sander flat on the work piece Always allow weight of sander do the work
• NEVER use heavy pressure to “speed” up the sander
Always use the correct sand paper grit Never hold tool by the cord
Sanding Pad
Spring Clip
On/Off
Random Orbit Sander
Always make sure Sand Paper is securely attached
Always keep sander flat on the work piece Always allow weight of sander do the work
• NEVER use heavy pressure to “speed” up the sander
Always use the correct sand paper grit Never hold the tool by the cord
Sanding Pad
Variable Speed Switch
On/Off
Sand Paper for the Power Sanders
Sheet Sand Paper• Dual Action Sander uses ¼ of a Full Sheet of
Sandpaper
5” Disc Sand Paper• Velcro or Hook & Loop
• PSA – pressure sensitive adhesive