PORTABLE MAGNETIC DRILLS, HOLE PUNCHERS, ACCESSORIES …

PORTABLE MAGNETIC

DRILLS, HOLE PUNCHERS,

ACCESSORIESAND

FABRICATIONTOOLS

Contact Mary Chrastek email: [email protected]

WWW.HOUGEN.COM

FSC GROUP: MASCONTRACT NO: GS-21F-035CA

CONTRACT PERIOD: APRIL 1, 2015 - MARCH 31, 2025

SIN: 811310MR

General Services AdministrationFederal Supply Service

Authorized Federal Supply Schedule Price List

MAS HARDWARE SUPERSTORESIN: 811310MR

GSA CONTRACT NUMBER: GS-21F-035CA

PERIOD COVERED BY CONTRACT:April 1, 2015 through March 31, 2025

Business Size: Small Business

HOUGEN MANUFACTURING, INC.3001 Hougen Drive

Swartz Creek 48473Phone: (810) 635-7111 • Order Hotline: (800) 426-7818

Fax: (810) 635-8277 • www.hougen.comGovernment Sales POC

Mary Chrastek: [email protected]

(i)GENERAL SERVICES ADMINISTRATIONFederal Supply Service Authorized Federal Supply Schedule Price List On-line access to contract ordering information, terms and conditions, up-to-date pricing, and the option to create an electronic delivery order are available through GSAAdvantage!® a menu-driven database system. The INTERNET address GSAAdvantage!® is: GSAAdvantage.gov. Schedule Title FSC Group, Part, and Section or Standard Industrial Group (as applicable) FSC Class(es)/Product code(s) and/or Service Codes (as applicable) Contract number For more information on ordering from Federal Supply Schedules click on the FSS Schedules button at fss.gsa.gov. Contract period.

Contractor's name, address, and phone number (include toll-free WATS number and FAX number, if applicable)HOUGEN MANUFACTURING, INC.3001 HOUGEN DRIVE SWARTZ CREEK, MI 48473TEL: 810-635-7111 TOLL FREE 800-426-7816FAX: 810-635-8277 TOLL FREE 800-309-3299 Contractor's internet address/web site where schedule information can be found (as applicable). Contract administration source (if different from preceding entry).www.hougen.com Business size: Small

(ii)CUSTOMER INFORMATION: The following information should be placed under this heading in consecutively numbered paragraphs in the sequence set forth below. If this information is placed in another part of the Federal Supply Schedule Price List, a table of contents must be shown on the cover page that refers to the exact location of the information.

1a. Table of awarded special item number(s) with appropriate cross-reference to item descriptions and awarded price(s).SIN 811310MR

1b. Identification of the lowest priced model number and lowest unit price for that model for each special item number awarded in the contract. This price is the Government price based on a unit of one, exclusive of any quantity/dollar volume, prompt payment, or any other concession affecting price. Those contracts that have unit prices based on the geographic location of the customer, should show the range of the lowest price, and cite the areas to which the prices apply.

LIST PRICE

BASE DISCOUNT 25% FROM LIST

GOVERNMENT VOLUME DISCOUNT ADDITIONAL 10%

HMD904 MAG DRILL 115V

$995.00 $746.25 $671.63

1c. If the Contractor is proposing hourly rates, a description of all corresponding commercial job titles, experience, functional responsibility and education for those types of employees or subcontractors who will perform services shall be provided. If hourly rates are not applicable, indicate "Not applicable" for this item. N/A

2. Maximum order.

3. Minimum order. $100.00

4. Geographic coverage (delivery area). 50 UNITED STATES AND US TERRITORIES

5. Point(s) of production (city, county, and State or foreign country). SWARTZ CREEK, GENESEE, MICHIGAN

6. Discount from list prices or statement of net price. 25%-41.9%

7. Quantity discounts. 5%-15%

8. Prompt payment terms. Note: Prompt payment terms must be followed by the statement "Information for Ordering Offices: Prompt payment terms cannot be negotiated out of the contractual agreement in exchange for other concessions." NET 30.

9a. Notification that Government purchase cards are accepted at or below the micro-purchase threshold.Government purchase cards are accepted in full.

9b. Notification whether Government purchase cards are accepted or not accepted above the micro-purchase threshold.Government purchase cards are accepted in full.

10. Foreign items. HOLE PUNCHERS - JAPAN

11a. Time of delivery. 7 DAY (BASED ON CURRENT AVAILABILITY)

11b. Expedited Delivery. The Contractor will insert the sentence “Items available for expedited delivery are noted in this price list." under this heading. The Contractor may use a symbol of its choosing to highlight items in its price lists that have expedited delivery. F.O.B. ORIGIN

11c. Overnight and 2-day delivery. The Contractor will indicate whether overnight and 2-day delivery are available. Also, the Contractor will indicate that the schedule customer may contact the Contractor for rates for overnight and 2-day delivery. F.O.B. ORIGIN

11d. Urgent Requirements. The Contractor will note in its price list the "Urgent Requirements" clause of its contract and advise agencies that they can also contact the Contractor's representative to effect a faster delivery. F.O.B. ORIGIN

12. F.O.B. point(s). F.O.B. DESTINATION (Excluding Hawaii, Alaska, Puerto Rico are F.O.B Origin)

13a. Ordering address(es). HOUGEN MANUFACTURING, INC, 3001 HOUGEN DRIVE, SWARTZ CREEK, MI 48473

13b. Ordering procedures: For supplies and services, the ordering procedures, information on Blanket Purchase Agreements (BPA's) are found in Federal Acquisition Regulation (FAR) 8.405-3.

14. Payment address(es). HOUGEN MANUFACTURING, INC, 3001 HOUGEN DRIVE, SWARTZ CREEK, MI 48473

15. Warranty provision. STANDARD COMMERCIAL - 1 YEAR WARRANTY ON MAGNETIC DRILLS

16. Export packing charges, if applicable. N/A

17. Terms and conditions of Government purchase card acceptance (any thresholds above the micro-purchase level).

18. Terms and conditions of rental, maintenance, and repair (if applicable). N/A

19. Terms and conditions of installation (if applicable). N/A

20. Terms and conditions of repair parts indicating date of parts price lists and any discounts from list prices (if applicable). N/A

20a. Terms and conditions for any other services(if applicable). N/A

21. List of service and distribution points (if applicable). N/A

22. List of participating dealers (if applicable). N/A

23. Preventive maintenance (if applicable). N/A

24a. Special attributes such as environmental attributes (e.g., recycled content, energy efficiency, and/or reduced pollutants). N/A

24b. If applicable, indicate that Section 508 compliance information is available on Electronic and Information Technology(EIT) supplies and services and show where full details can be found (e.g. contractor’s website or other location.) The EIT standards can be found at: www.Section508.gov/. N/A

25. Data Universal Number System (DUNS) number. 005396973

26. Notification regarding registration in Central Contractor Registration (CCR) database. HOUGEN MANUFACTURING, INC SAM (FORMERLY KNOWN AS CCR) REGISTRATION IS VALID THROUGH 03/05/2016

4

HOUGEN® PORTABLE MAGNETIC DRILLS

HOUGEN® PORTABLE MAGNETIC DRILLSPart No. Description Price Ea.

0130101 HMD130 Low Profile (120V) $669.90

0130201 HMD130 Low Profile (230V) 748.11

0200102 HMD2MT #2 Morse Taper (115V) 1356.80

0200202 HMD2MT #2 Morse Taper (230V) 1462.22

0904101 HMD904 Magnetic Drill (115V) 676.70

0904102 HMD904 with Coolant (115V) 714.11

0904103 HMD904 Swivel Base (115V) 765.11

0904104 HMD904 Swivel/Coolant (115V) 782.12

0904105 HMD904 Fabricators Kit - Fractional (115V) 938.54

0904108 HMD904 Fabricators Kit - Metric (115V) 941.94

0904109 HMD904 Swivel Fab. Kit - Fractional (115V) 1005.87

0904110 HMD904 Swivel Fab. Kit - Metric (115V) 1009.95

0904201 HMD904 Mag Drill (230V) 744.71


0904203 HMD904 Swivel Base (230V) 812.72










Product PageHougen® Portable Magnetic Drills 4 Sharpening Machine 4Tornado II™ Paint Shakers 4Magnetic Drill Accessories 5"12,000-Series" Annular Cutters & Kits 6-9"12,000-Series" Stack Drilling Geometry 9Slick-Stik™ Lubricant & RotaMagic™ Cutting Fluid 9 RotaLoc™ & RotaLoc Plus™ Annular Cutters 10"16,000-Series" Extended Reach Cutters and Kit 11RotaCut™ Sheet Metal Cutters, Kits & Accessories 11-12Holcutter™, Kits & "14,000-Series" Accessories 13Hole Punch Machines & Accessories 14-17Warranty & Contact Information 20

TABLE OF CONTENTS HOUGEN® PORTABLE MAGNETIC DRILLSPart No. Description Price Ea.

0905109 HMD905 Swivel Fab. Kit - Fractional (115V) $1278.59




















0918102 HMD918 Six Inch Mag Drill (115V) 1356.80

0918202 HMD917 Six Inch Mag Drill (115V) 1492.82





0934102 HMD934 Four Speed (115V) 2512.97

0934202 HMD934 Four Speed (230V) 2703.40

TORNADO II™ PAINT SHAKERPart No. Description Price Ea.

51200 Tornado II™ Portable Paint Shaker (120V) $358.94

51230 Tornado II™ Portable Paint Shaker (230V) 398.99

SHARPENING MACHINEPart No. Description Price Ea.

10950 Bench Mount Sharpening Machine $2644.84

10950A Sharpening Machine without Motor 2418.14

04049 Replacement Tool Holder - "12,000 Series" 74.62

04147 Optional Tool Holder - RotaLoc™ Cutters 74.62

04118 Optional Stand for Sharpening Machine 286.10

5

MAGNETIC DRILL ACCESSORIESPart No. Description Price Ea.

01829 Spindle Adapter (Threaded) - HMD904 $23.12

02449 Ratchet Drive - HMD904, HMD905 59.13

02463 Tapping Kit (Threaded) - HMD904 642.32

02495 Tap Collet (#6 - 1/4") 45.30

02496 Tap Collet (1/4" - 1/2") 45.30

02564 Pipe Adapter - HMD904, HMD905, HMD505 282.58

02608 Twist Drill Adapter - (Mag Drill Shank) 26.68

03835 1/2" Dia. Flatted Shank Twist Drill 13.98





03845 Twist Drill Adapter Kit - (Mag Drill Shank) 60.42

05000 Vac-Pad™ Portable Vacuum Base 566.71

05457 Tapping Kit Hex Drive - HMD904 642.32

05467 Carbide Insert for Countersink (10 pk) 98.24

05536 Spindle Chuck Adapter (Hex) - HMD904, 925 23.12

05779 Carbide Insert, Wear Resistent (10 pk) 98.24

07021 Carrying Handle for HMD115, HMD150 12.47

07339 Repl. Hex Drive Adapter for 05457 Tap Unit 56.60

07448 #2 Morse Taper Adapter - HMD917 55.16

08176 Tapping Adapter (Slot) - HMD904, 905 40.69

08177 Tapping Attachment (Slot) - HMD904, 905 642.32

08179 Tapping Adapter (Slot) - HMD917 31.21

08180 Tapping Attachment (Slot) - HMD917 812.34

08186 1/2" Spindle Adapter (Slot) - HMD904, 905 35.40

08190 1/2" Spindle Adapter (Slot) - HMD917 48.25

08446 Pressurized Coolant System HMD934 94.46

08597 Spindle Adapter "12,000-Series' to HMD933 37.78

08821 #2 Morse Taper Drill Chuck Adapter 33.02

10100 1" Arbor Extender - (Mag Drill Shank) 57.02

10200 2" Arbor Extender - (Mag Drill Shank) 63.02

10726 Pipe Adapter Brackets - HMD933 32.00

10730 Safety Chain (High Test) 9.63

10731 1/2" Hougen Chuck & Key 45.72

10737 5/8" Hougen Chuck & Key 66.12

MAGNETIC DRILL ACCESSORIESPart No. Description Price Ea.

10807 Tap Collet (#10 - 1/2") $44.96

10808 Tap Collet (1/2" - 3/4") 52.52

10937 Tapping Kit - HMD914 812.34

12960 9/16" Countersink Pilot 10.20




12965 Carbide Insert Countersink Kit - (Mag Drill Shank) 151.10

12966 82˚ Carbide Insert Countersink (without pilot) 132.20

17680 RotaLoc Spindle Adapter w/ Pilot 71.79

24140 Pressurized Coolant System - HMD505/508 62.34

24154 Ratchet Drive - HMD505/508 15.19

40226 Spindle Adapter (Tap) - HMD914 22.25

40341 Spindle Adapter (Chuck) - HMD914 23.88

83000 #2 Morse Taper Tapping Kit 638.50

83001 #2 Morse Tap Holder 264.45

83002 3/4" Tap Wrench 24.90

83003 1-3/16" Tap Wrench 26.56

83005 #8 Collet for 83001 Holder 41.56

83006 #10 Collet for 83001 Holder 41.56

83009 1/4" Collet for 83001 Holder 41.56







MAGNETIC DRILL ACCESSORIES

Hougen's Customer Service is always ready to

answer your questions.

800-426-7818

6

"12,000-SERIES" ANNULAR CUTTERS & CUTTER KITS

"12,000-SERIES" CUTTERS - M2 H.S.S.

Cutter Dia.(inches)

1" Depth of Cut 2" Depth of Cut 3" Depth of Cut 4" Depth of Cut 6" Depth of Cut

Part No. Price Ea. Part. No. Price Ea. Part. No. Price Ea. Part. No. Price Ea. Part. No. Price Ea.

Use with Pilot: 10531 10532

7/16 12114 $15.89 12214 $20.15 … … … … … …

1/2 12116 16.84 12216 22.18 … … … … … …

9/16 12118 19.23 12218 25.16 … … … … … …

Use with Pilot: 10527 10528 24131 4-10528 6-10528

5/8 12120 20.12 12220 27.14 … … … … … …

11/16 12122 20.93 12222 30.09 … … … … … …

3/4 12124 22.02 12224 33.07 3-12224 $49.54 … … … …

13/16 12126 23.60 12226 35.04 3-12226 52.02 4-12226 $66.24 6-12226 $109.39

7/8 12128 25.30 12228 37.16 3-12228 54.67 … … … …

15/16 12130 26.97 12230 39.97 3-12230 59.17 4-12230 72.37 6-12230 115.35

1 12132 28.95 12232 43.39 3-12232 65.05 4-12232 76.82 6-12232 120.24

1-1/16 12134 29.70 12234 44.42 3-12234 66.38 4-12234 80.72 6-12234 122.47

1-1/8 12136 34.21 12236 51.33 3-12236 77.02 4-12236 86.28 6-12236 133.60

1-3/16 12138 35.63 12238 53.33 3-12238 79.88 4-12238 88.47 6-12238 153.09

1-1/4 12140 36.99 12240 55.42 3-12240 82.97 4-12240 94.63 6-12240 155.87

1-5/16 12142 38.94 12242 58.31 3-12242 87.40 … … … …

1-3/8 12144 50.05 12244 61.23 3-12244 87.98 … … … …

1-7/16 12146 56.00 12246 70.28 3-12246 88.23 … … … …

1-1/2 12148 58.53 12248 73.62 3-12248 92.60 … … … …

1-9/16 12150 65.38 12250 82.33 3-12250 103.60 … … … …

1-5/8 12152 68.97 12252 87.40 3-12252 110.75 … … … …

1-11/16 12154 71.70 12254 91.21 3-12254 115.96 … … … …

1-3/4 12156 76.82 12256 96.89 3-12256 122.22 … … … …

1-13/16 12158 79.63 12258 101.26 3-12258 128.81 … … … …

1-7/8 12160 83.81 12260 106.91 3-12260 136.36 … … … …

1-15/16 12162 89.71 12262 114.09 3-12262 145.07 … … … …

2 12164 92.55 12264 118.82 3-12264 152.53 … … … …

2-1/16 … … 12266 126.78 3-12266 156.90 … … … …

2-1/8 … … 12268 128.15 3-12268 160.04 … … … …

2-3/16 … … 12270 131.99 3-12270 165.47 … … … …

2-1/4 … … 12272 136.39 3-12272 171.73 … … … …

2-5/16 … … 12274 139.70 3-12274 179.44 … … … …

2-3/8 … … 12276 143.54 3-12276 186.04 … … … …

2-7/16 … … … … 3-12278 118.43 4-12278 215.71 … …

2-1/2 … … … … 3-12280 189.27 4-12280 217.10 … …

2-9/16 … … … … 3-12282 191.77 4-12282 220.16 … …

2-5/8 … … … … 3-12284 192.05 4-12284 222.67 … …

2-11/16 … … … … 3-12286 195.11 4-12286 239.37 … …

2-3/4 … … … … 3-12288 197.62 4-12288 242.43 … …

2-13/16 … … … … 3-12290 200.68 4-12290 244.94 … …

2-7/8 … … … … 3-12292 208.75 4-12292 256.91 … …

2-15/16 … … … … 3-12294 217.38 4-12294 267.20 … …

3 … … … … 3-12296 219.89 4-12296 275.83 … …

3-1/16 … … … … 3-12298 228.24 4-12298 283.90 … …

All Cutters are available with Stack Geometry. To order: add 'S' to end of part number. ie...12426S. (Some sizes may take 7-10 days. Call for availability).

7

"12,000-SERIES" ANNULAR CUTTERS

"12,000-SERIES" CUTTERS - M2 H.S.S. - METRIC - FUSION2™ SHANKSCutter Dia.

(mm) Dec. Equiv.25mm Depth of Cut 50mm Depth of Cut 76mm Depth of Cut

Part No. Price Ea. Part. No. Price Ea. Part. No. Price Ea.


12mm .4724 12312 $16.20 12412 $21.38 … …

13mm .5118 12313 17.76 12413 23.38 … …

14mm .5512 12314 18.54 12414 24.38 … …

15mm .5906 12315 19.90 12415 26.36 … …

Use with Pilot: 10527 10528 24131

16mm .6299 12316 $20.60 12416 $28.36 … …

17mm .6693 12317 20.85 12417 29.36 … …

18mm .7087 12318 21.54 12418 31.34 … …

19mm .7480 12319 21.85 12419 32.37 12519 $51.21

20mm .7874 12320 23.02 12420 35.35 12520 52.44

21mm .8268 12321 24.41 12421 35.79 12521 54.53

22mm .8661 12322 24.91 12422 36.82 12522 55.11

23mm .9055 12323 26.36 12423 37.02 12523 58.78

24mm .9449 12324 27.19 12424 41.42 12524 65.10

25mm .9843 12325 28.53 12425 42.61 12525 65.58

26mm 1.0237 12326 29.50 12426 44.31 12526 66.91

27mm 1.0630 12327 31.48 12427 47.07 12527 76.79

28mm 1.1024 12328 32.98 12428 49.40 12528 77.66

29mm 1.1417 12329 35.15 12429 52.74 12529 80.13

30mm 1.1812 12330 36.27 12430 54.47 12530 80.55

31mm 1.2205 12331 36.85 12431 57.50 12531 83.64

32mm 1.2598 12332 37.97 12432 56.81 12532 88.09

33mm 1.2993 12333 38.61 12433 57.78 12533 91.77

34mm 1.3386 12334 44.76 12434 60.32 12534 88.32

35mm 1.3779 12335 51.85 12435 63.43 12535 88.48

36mm 1.4174 12336 54.39 12436 67.14 12536 88.96

37mm 1.4567 12337 58.28 12437 74.54 12537 94.05

38mm 1.4961 12338 61.74 12438 78.32 12538 93.35

39mm 1.5354 12339 65.60 12439 81.58 12539 104.43

40mm 1.5748 12340 67.22 12440 85.42 12540 111.64

41mm 1.6142 12341 72.08 12441 87.65 12541 116.29

42mm 1.6535 12342 71.92 12442 91.38 12542 116.90

43mm 1.6929 12343 74.15 12443 94.83 12543 123.22

44mm 1.7323 12344 80.27 12444 98.67 12544 128.34

45mm 1.7717 12345 78.60 12445 101.84 12545 129.12

46mm 1.8110 12346 83.22 12446 104.85 12546 129.87

47mm 1.8504 12347 85.31 12447 108.08 12547 143.18

48mm 1.8898 12348 88.70 12448 110.75 12548 146.24

49mm 1.9291 12349 93.74 12449 114.59 12549 152.33

50mm 1.9685 12350 91.32 12450 117.40 12550 153.75

51mm 2.0079 12351 92.96 12451 120.38 12551 157.12

52mm 2.0472 12352 96.17 12452 124.58 12552 166.11

53mm 2.0866 12353 96.86 12453 126.92 … …

54mm 2.1260 12354 98.48 12454 129.20 … …

55mm 2.1654 12355 101.26 12455 131.60 … …

56mm 2.2047 12356 108.27 12456 140.70 … …

57mm 2.2441 12357 111.20 12457 137.08 … …

58mm 2.2835 12358 114.12 12458 139.47 … …

59mm 2.3228 12359 117.18 12459 141.37 … …

60mm 2.3622 12360 114.76 12460 143.90 … …

All Cutters are available with Stack Geometry. To order: add 'S' to end of part number. ie...12426S. (Some sizes may take 7-10 days. Call for availability).

8

"12,000-SERIES" EXTENDED REACH PILOTSPart No. Description Price Ea.

4-10528 Pilot 4" Extended Reach "12,000-Series" $10.58

6-10528 Pilot 6" Extended Reach "12,000-Series" 10.58

"12,000-SERIES" TAP DRILLS - M2 H.S.S.Diameter(Inches) Tap Size Dec.

Equiv.1" D.O.C. 2" D.O.C.

Part No. Price Ea. Part No. Price Ea.


7/16 1/2-13 .4375 12114 $15.89 12214 $20.15

29/64 1/2-20 .4531 … … 12010 22.82

31/64 9/16-12 .4844 … … 12011 22.82

33/64 9/16-18 .5156 … … 12012 25.47

17/32 5/8-11 .5313 12117 18.04 12217 23.69

37/64 5/8-18 .5781 … … 12014 27.97

19/32 11/16-11 .5938 … … 12219 27.97


21/32 3/4-10 .6563 12121 20.54 12221 28.61

11/16 3/4-16 .6875 12122 20.93 12222 30.09

23/32 1/2-14 NPT .7188 … … 12223 33.40

49/64 7/8-9 .7656 … … 12020 34.07

25/32 7/8-9 .7812 12125 22.80 12225 34.07

13/16 7/8-14 .8125 12126 23.60 12226 35.04

7/8 1-8 .8750 12128 25.30 12228 37.16

59/64 1-12 .9219 … … 12025 40.64"12,000-SERIES" CUTTERS -TiN COATED M2 H.S.S.

Diameter (Inches)

Dec. Equiv.

1" D.O.C. 2" D.O.C.

Part No. Price Ea. Part No. Price Ea.

Use with Pilot 10531 10532

7/16 .4375 12614 $19.73 12714 $24.41

1/2 .5000 12616 20.68 12716 26.44

9/16 .5625 12618 23.07 12718 29.42

Use with Pilot 10527 10528

5/8 .6250 12620 23.96 12720 31.40

11/16 .6875 12622 24.77 12722 34.35

3/4 .7500 12624 25.86 12724 37.33

13/16 .8125 12626 27.44 12726 39.86

7/8 .8750 12628 29.14 12728 41.42

5/16 .9375 12630 30.81 12730 44.23

1 1.0000 12632 32.79 12732 47.65

1-1/16 1.0625 12634 33.54 12734 48.68

1-1/8 1.1250 12636 38.05 12736 57.53

1-3/16 1.1875 12638 41.14 12738 59.54

1-1/4 1.2500 12640 42.50 12740 61.74

1-5/16 1.3125 12642 45.06 12742 64.52

1-3/8 1.3750 12644 56.17 12744 68.83

1-7/16 1.4375 12646 62.12 12746 77.88

1-1/2 1.5000 12648 64.66 12748 81.22

1-9/16 1.5625 12650 77.29 12750 97.31

1-5/8 1.6250 12652 80.88 12752 102.37

1-11/16 1.6875 12654 83.61 12754 106.19

1-3/4 1.7500 12656 88.73 12756 111.86

1-13/16 1.8125 12658 91.55 12758 116.23

1-7/8 1.8750 12660 95.72 12760 121.88

1-15/16 1.9375 12662 101.62 12762 129.07

2 2.0000 12664 104.46 12764 133.80

2-1/16 2.0625 … … 12766 153.92

2-1/8 2.1250 … … 12768 155.45

2-3/16 2.1875 … … 12770 159.40

2-1/4 2.2500 … … 12772 164.22

2-5/16 2.3125 … … 12774 167.81

2-3/8 2.3750 … … 12776 169.01

"12,000-SERIES" ANNULAR CUTTERS & ACCESSORIES

"12,000-SERIES" CUTTER PILOTSPilots for

CutterDiameter

1" D.O.C. 2" D.O.C. 3" D.O.C.

PartNo.

Price Ea.

PartNo.

Price Ea.

PartNo. Price Ea.

7/16 - 9/16"& 12 - 15mm 10531 $4.99 10532 $5.21 … …

5/8 - 2-3/8"& 16 - 60mm 10527 5.59 10528 6.01 … …

3/4 - 2-3/8"& 19 - 60mm

… … … … 24131 $7.78

DISCONTINUED SERIES PILOTS1/2 - 11/16"

& 13 - 18mm 10533 5.59 10534 6.01 … …

"12,000-SERIES" CUTTER KITSPart No. D.O.C. Description Price Ea.

12001 1" Kit contains 9/16, 11/16, 13/16, 15/16 & 1-1/16" diameter cutters $130.95

12002 2" Kit contains 9/16, 11/16, 13/16, 15/16 & 1-1/16" diameter cutters 196.44

12003 25mm Kit contains 14mm, 16mm, 18mm, 20mm & 22mm diameter cutters 137.53

12004 50mm Kit contains 14mm, 16mm, 18mm, 20mm & 22mm diameter cutters 206.30

12005 1" Kit contains 5/8, 3/4, 7/8, 1, 1-1/8" diameter cutters 144.08

12006 2" Kit contains 5/8, 3/4, 7/8, 1, 1-1/8" diameter cutters 216.12

12007 2" Kit contains 7/16, 17/32, 21/32, 25/32, 7/8" diameter cutters 168.28

12601 1" TiN coated kit contains 9/16, 11/16, 13/16, 15/16 & 1-1/16" dia. cutters 150.60

12702 2" TiN coated kit contains 9/16, 11/16, 13/16, 15/16 & 1-1/16" dia. cutters 216.09

Kits also contain two pilots, hex wrenches and a sturdy plastic case.

9

HOLE ENLARGING PILOTS - "12,000-SERIES"Part No. Description Price Ea.

07373 11/16" Pilot assy for enlarging up to 13/16" $29.09

07372 13/16" Pilot assy for enlarging up to 15/16" 29.09

07371 15/16" Pilot assy for enlarging up to 1-1/16" 29.09

07368 11/16" Replacement Nose 11.79



07370 Replacement Pilot 19.04

"12,000-SERIES" ARBORS FOR STATIONARY TOOLS(WITH 1/2" CHUCKS)

Part No. Description Price Ea.

11016

Arbor Assembly for 3/4" Shank Cutters(Complete with 40222 & 11054 Screws, 11069 Spring & 11041 Body)Pilot sold separately

$37.93

Pilots

11022 Starter Pilot for 7/16" - 9/16" (12mm - 15mm) Dia. Cutters 6.01

11031 Starter Pilot for 5/8 - 2-1/16" & 16 - 52mmDia. Cutters 6.39

11032 Starter Pilot for old style 1/2 - 11/16" & 13 - 18mm Dia. Cutters 6.76

"12,000-SERIES" ARBORS FOR MACHINE TOOLS

Shank Size

Arbor Assemblywith Oil Inducer

Arbor Assemblywithout Oil Inducer Hole Capacity

Part No. Price Ea. Part No. Price Ea. Dia. Depth

#2Morse 10804 $117.85 10814 $62.57 1" 1-1/2"

#3Morse 10806 117.85 10816 62.57 2-3/8" 1-1/2"

R8 49849 161.71 49853 125.44 2-3/8" 2"

Straight 49850 156.42 49851 125.44 2-3/8" 2"

STACK DRILLINGCharges are listed below for grinding Hougen® Stack Cut geometry (add to the cost of the cutter). Delivery for in-stock sizes: 7-10 working days. Call Hougen Customer Service Department for availability of specific sizes.

"12,000-SERIES" CUTTERS - M2 H.S.S.Fractional(Inches)

Metric(millimeters)

No. of Teeth

Additional Chargeper Cutter

7/16 - 1/2 12 - 13 3 $6.80

9/16 - 13/16 14 - 21 4 9.07

7/8 - 1-5/16 22 - 34 6 13.60

1-3/8 - 1-5/8 35 - 42 8 18.14

1-11/16 - 2-3/8 43 - 60 10 22.67

2-7/16 - 3-1/16* .... 6 18.14

RESHARPENINGCharges are listed below for resharpening Hougen® Annular Cutters. Delivery: 7-10 working days. Fabricating Cutters: $2.27 per tooth Industrial Cutters: $3.02 per tooth

"12,000-SERIES" ACCESSORIES

SLICK-STIK™ LUBRICANT & ROTAMAGIC™SUPER CONCENTRATED CUTTING FLUID

Part No. Description Price

11741-12(12) 1 Pint Bottles, makes 1 pint each,12 pints total

$29.47

11742-4(4) 1 Gallon Bottles, makes 11 gallons,each, 44 gallons total

142.82

11743 (1) 5 Gallon Pail, makes 55 gallons149.62 (plus $6

handling fee)

11745-6 (6) 16 oz. Slick-Stik™ Lubricant 47.98

11746-12 (12) 1.68 oz. Slick-Stik™ Lubricant 35.82

11746-24(24) 1.68 oz. Slick-Stik™ Lubricant inFree Counter Display

67.75

11747-12 (12) 17 oz. RotaFoam™ Cutting Fluid 113.35

11748-10 (10) 8 oz. RotaGel™ Cutting Lube 112.97

* Follows industrial pricing

10

ROTALOC™ & ROTALOC PLUS™ ANNULAR CUTTERS

ROTALOC™ ANNULAR CUTTERS (STACK CUT) - PREMIUM M42 H.S.S. - 3/4" D.O.C. (FOR HMD115 ONLY)Diameter (Inches) Dec. Equiv. Part No. Price Ea.

Use with Pilot 17100 OR 17101

1/2 .5000 17116 $21.24

Metric

12mm .4724 17300 $21.24

13mm .5118 17302 21.88

ROTALOC™ & ROTALOC PLUS™ CUTTER KITSPart No. Description Price Ea.

Use with HMD130 only

17802 Kit contains (3) cutters, 1" D.O.C. - 1/2, 5/8, 3/4" dia., plus (3) Pilots in a sturdy plastic case. 78.59

17803 Kit contains (3) cutters, 1" D.O.C. - 9/16, 11/16,13/16" dia., plus (3) Pilots in a sturdy plastic case. 83.51

17805 Kit contains (3) cutters, 1" D.O.C. - 14mm, 16mm, 18mm dia., plus (3) Pilots in a sturdy plastic case. 82.52

ROTALOC™ PLUS ANNULAR CUTTERS (STACK CUT) -M42 H.S.S. - 1" D.O.C. (FOR HMD130 & HMD150)Diameter (Inches) Dec. Equiv. Part No. Price Ea.

Use with Pilot 17470

7/16 .4375 17814 $17.79

1/2 .5000 17816 17.06

17/32 .5312 17817 22.18

9/16 .5625 17818 19.51

5/8 .6250 17820 20.40

11/16 .6875 17822 21.24

3/4 .7500 17824 22.35

13/16 .8125 17826 23.94

7/8 .8750 17828 25.66

15/16 .9375 17830 27.36

1 1.0000 17832 29.31

1-1/16 1.0625 17834 30.14

1-1/8 1.1250 17836 34.74

1-3/16 1.1875 17838 36.16

1-1/4 1.2500 17840 37.55

1-5/16 1.3125 17842 39.52

1-3/8 1.3750 17844 41.61

Metric

12mm .4724 17900 $17.12

13mm .5118 17902 18.79

14mm .5512 17904 19.62

15mm .5906 17906 21.04

16mm .6299 17908 21.79

17mm .6693 17910 22.04

17.5mm .6889 17911 23.71

18mm .7087 17912 22.77

19mm .7480 17914 23.13

20mm .7874 17916 24.35

21mm .8268 17918 25.77

22mm .8661 17920 26.36

23mm .9055 17922 27.86

24mm .9449 17924 28.72

24.5mm .9645 17925 29.70

25mm .9843 17926 30.17

26mm 1.0236 17928 31.20

26.5mm 1.0433 17929 32.57

27mm 1.0630 17930 33.07

28mm 1.1024 17932 34.63

29mm 1.1417 17934 36.91

30mm 1.1811 17936 38.08

31mm 1.2205 17938 38.69

32mm 1.2598 17940 39.86

33mm 1.2992 17942 40.53

34mm 1.3386 17944 47.04

35mm 1.3779 17946 52.88

ROTALOC™ CUTTER PILOTSPart No. Description Price Ea.

17100 Pilot for RotaLoc Cutters $4.50

17470 Pilot for RotaLoc Plus Cutters - HMD150 4.50

17810 Pilot for RotaLoc Plus Cutters - HMD130 4.50

11

ROTACUT SHEET METAL HOLE CUTTERS

ROTACUT™ SHEET METAL HOLE CUTTER KITSPart No. Description D.O.C. Price Ea.

11075

RotaCut™ Kit (Fractional) contains 11088 Arbor Assembly, center punch, extra pilot, and seven cutters (5/16, 3/8, 7/16, 1/2, 9/16, 5/8 & 3/4") in a plastic case

1/4" $52.90

11077

RotaCut™ Kit (Metric) contains 11088 Arbor Assembly, center punch, extra pilot, and seven cutters (8, 10, 12, 14, 16, 18 & 20mm) in a plastic case

1/4" 52.90

11078

Large Diameter RotaCut™ Kit contains 11005 Arbor Assembly, extra pilot, center punch, and six cutters (7/8, 1, 1-1/8,1-1/4, 1-3/8 & 1-1/2") in a plastic case

1/2" 132.27

11085Fractional Master Kit contains 16 sizes of cutters from 1/4" to 3/4", extra pilots, arbor & center punch in a plastic case.

1/4" 139.01

11086Metric Master Kit contains 16 sizes of cutters from 6 to 20mm, extra pilots, arbor & center punch in a plastic case.

1/4" 139.01

11087

RotaCut™ Combo Kit (Fractional) contains 11088 & 11005 Arbor Assy, center punch, extra pilots, and thirteen cutters (5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4 7/8, 1, 1-1/8, 1-1/4, 1-3/8 & 1-1/2") in a plastic case

1/4"&

1/2"166.25

ROTACUT™ HOLEMAKING DISPLAY CENTERPart No. Description Price Ea.

11075C (1) RotaCut™ Kit Trac Pac $52.90

11104C 5/16" Cutter Package (3-Pack) 14.24







11083 11029 Pilot Package (3-Pack) 3.63

03913C 13002 Pilot Package (3-Pack) 9.52

11088 3/8 Arbor Assembly and Pilot Pin Package 9.79

11089 3/8 Arbor Assembly Skip Proof Package 13.90

03770C Center Punch Package 4.32

EXTENDED REACH CUTTER KITPart No. Description Price Ea.

16005Kit contains four (4) cutters: 3/87/16, 1/2 & 9/16" diameter, two (2)pilots Part No. 11029, and hex wrench.

$83.73

EXTENDED REACH CUTTERS - M2 H.S.S. (PILOT INCLUDED)

Dia., In. Dec.Equiv. Part No. Flute

LengthMax.

D.O.C. Price Ea.

3/8 .3750 16112 .80" 1/4" $18.59

7/16 .4375 16114 .80" 1/4" 19.95

1/2 .5000 16116 .80" 1/4" 20.55

9/16 .5625 16118 .80" 1/4" 22.37

ROTACUT™ PREMIUM SPOTWELD CUTTERPart No. Description D.O.C. Price Ea.

11200CPremium Spotweld packagecontains (1) 3/8" Cutter and Arbor Assembly

1/4" $15.45

12

ROTACUT™ SHEET METAL HOLE CUTTERS - M2 H.S.S.

Diameter Dec. Equiv. Fractional Part No. D.O.C. Price Ea.

With 3/8-24 Threaded Hole - Use with Arbor 11088 or 11006

1/4 .2500 11100 1/4" $4.75

9/32 .2812 11102 1/4" 4.75

5/16 .3125 11104 1/4" 4.75

11/32 .3438 11106 1/4" 5.65

With 3/8-24 Threaded Hole - Use with Arbor 11088, 11089 or 11006

3/8 .3750 11108 1/4" 5.65

13/32 .4062 11110 1/4" 7.10

27/64 .4219 11111 1/4" 7.10

7/16 .4375 11112 1/4" 7.10

29/64 .4531 11113 1/4" 6.35

15/32 .4688 11114 1/4" 7.41

1/2 .5000 11116 1/4" 7.41

17/32 .5312 11118 1/4" 8.16

9/16 .5625 11120 1/4" 8.16

5/8 .6250 11124 1/4" 8.61

11/16 .6875 11128 1/4" 9.82

23/32 .7188 11130 1/4" 9.82

3/4 .7500 11132 1/4" 9.82


13/16 .8125 11136 1/2" 14.42

7/8 .8750 11140 1/2" 14.96

15/16 .9375 11144 1/2" 15.84

1 1.0000 11148 1/2" 16.72

1-1/16 1.0625 11152 1/2" 18.95

1-1/8 1.1250 11156 1/2" 19.59

1-3/16 1.1875 11160 1/2" 20.31

1-1/4 1.2500 11164 1/2" 22.94

1-5/16 1.3125 11165 1/2" 23.12

1-3/8 1.3750 11166 1/2" 24.48

1-7/16 1.4375 11167 1/2" 25.69

1-1/2 1.5000 11168 1/2" 26.15

ROTACUT™ SHEET METAL HOLE CUTTERS & ACCESSORIES

ROTACUT™ SHEET METAL HOLE CUTTERS - M2 H.S.S.

Diameter Dec. Equiv. Fractional Part No. D.O.C. Price Ea.


6mm .2362 11206 1/4" $5.23

7mm .2756 11207 1/4" 5.23

8mm .3150 11208 1/4" 6.20

8.5mm .3346 11285 1/4" 10.25

9mm .3543 11209 1/4" 6.20

With 3/8-24 Threaded Hole - Use with Arbor 11088, 11089 or 11006

10mm .3937 11210 1/4" 7.80

11mm .4331 11211 1/4" 7.80

12mm .4724 11212 1/4" 8.16

13mm .5118 11213 1/4" 8.92

14mm .5512 11214 1/4" 8.92

15mm .5906 11215 1/4" 8.92

16mm .6299 11216 1/4" 9.37

17mm .6693 11217 1/4" 10.82

18mm .7087 11218 1/4" 10.82

19mm .7480 11219 1/4" 11.34

20mm .7874 11220 1/4" 11.34


21mm .8268 11221 1/2" 15.90

22mm .8661 11222 1/2" 15.90

23mm .9055 11223 1/2" 16.78

24mm .9449 11224 1/2" 17.65

25mm .9844 11225 1/2" 18.44

ROTACUT™ ARBORSPart No. Description Price Ea.

With 3/8-24 Cutter Mounting Threadto Fit up to 3/4" Diameter Cutters

11088 Triple Flatted for 3/8" Chuck $9.79

11089 Triple Flatted for 3/8" Chuck with Skip Proof Pilot Drill - For 3/8" Diameter & Larger Cutters 13.90

11006 Triple Flatted for 3/8" Chuck for 5/8" Drill Bushing 51.99

With 1/2-20 Cutter Mounting Threadto Fit 13/16" thru 1-1/2" Diameter Cutters

11005 Triple Flatted for 1/2" Chuck 30.59

11012 1/2" Triple Flatted Shank - for 15/16" Drill Bushing 66.11

PILOTS FOR ROTACUT™ ARBORSPart No. Description Price Ea.

11083 Three 11029 Pilots for 11088 & 11006 Arbors $3.63

11084 Three 11030 Pilots for 11012 Arbor 14.33

11027 Three Pilots for 11005 Arbor 16.32

03913C Three Pilot Drills for 11089 Arbor 9.52

13

HOLCUTTER™ & ACCESSORIES

HOLCUTTER™ - M2 H.S.S.Diameter (Inches)

DecimalEquiv.

Part No.Max. D.O.C.

(inches)Price Ea.

Use with 14009 Arbor, 04812 Hex Washer & 13007 Pilot Drill

11/16 .6875 14222 1/8" $9.07

3/4 .7500 14224 1/8" 9.22

13/16 .8125 14226 1/8" 9.22

7/8 .8750 14228 1/8" 9.22

15/16 .9375 14230 1/8" 9.37

1 1.0000 14232 1/8" 9.46

1-1/16 1.0625 14234 1/8" 9.52

1-1/8 1.1250 14236 1/8" 9.55

1-3/16 1.1875 14238 1/8" 9.82

1-1/4 1.2500 14240 1/8" 9.97

1-5/16 1.3125 14242 1/8" 10.13

1-3/8 1.3750 14244 1/8" 11.24

1-7/16 1.4375 14246 1/8" 11.24

1-1/2 1.5000 14248 1/8" 11.24

1-9/16 1.5625 14250 1/8" 11.46

1-5/8 1.6250 14252 1/8" 11.46

1-11/16 1.6875 14254 1/8" 11.55

1-3/4 1.7500 14256 1/8" 13.75

1-7/8 1.8750 14260 1/8" 14.06

2 2.0000 14262 1/8" 15.42

2-1/16 2.0625 14264 1/8" 17.83

2-1/8 2.1250 14266 1/8" 17.98

2-1/4 2.2500 14268 1/8" 18.11

2-3/8 2.3750 14272 1/8" 18.44

2-1/2 2.5000 14274 1/8" 19.50

2-9/16 2.5625 14276 1/8" 19.65

2-5/8 2.6250 14278 1/8" 19.80

2-3/4 2.7500 14280 1/8" 19.80

2-7/8 2.8750 14282 1/8" 19.95

3 3.0000 14284 1/8" 20.25

PILOTS FOR HOLCUTTER™ ARBORSPart No. Description Price Ea.

13007C 3/16" Pilot Drill for 14009 Arbor - 3 pack $13.87

13006 1/4" Pilot Drill for 14002 & 14004 Arbor 3.63

03913C 3/16" Pilot Drill for 14001 Arbor - 3 pack 9.52

HOLCUTTER™ HOLEMAKING DISPLAY CENTERPart No. Description Price Ea.

14005C (1) Electrician's & Fabricator's Kit $113.35

ELECTRICIAN'S & FABRICATOR'S KITSPart No. Description Price Ea.

14005

Electrician's & Fabricator's Kit contains sixcutters: 7/8, 1-1/8, 1-3/8, 1-3/4, 2 & 2-1/2" diameter, 14009 Arbor Assembly, 13007 Pilot, and 04812 Hex Washer

$113.35

HOLCUTTER™ - ARBORS

Part No.Shank Dia.,

InchesFits CutterDia./Mount

Price Ea.

140093/8"

Triple-Flatted11/16" thru 3"

Quad-Lead Thd.$18.35

14004(Discontinued

Series)

1/2"Triple-Flatted

1-3/8" thru 3""Double-D"

31.01

14001(Discontinued

Series)

3/8"Triple-Flatted

11/16" thru 1-5/16"3/8" Thread

9.58

* Details marked are required to operate Speed Reducer.

HOLCUTTER™ SPEED REDUCERPart No. Description Price Ea.

14008

Speed Reducer for 1/2" hand-held drills. Use with 11/16" thru 3" diameter Holcutters with quad-lead thread mount. Order accessories separately.

$147.36

Speed Reducer Accessories

04938* Clamp Handle $13.79

04939* 3/16" Pilot 4.61

04942 Adaptor - 1/2-20 to 3/8-24 (3/8" drill spindle) 9.22

04943 Adaptor - 1/2-20 to triple flat shank (drill chuck) 7.14

04812 Hex Washer 1.66

14

75002.5PR OBLONG PUNCHESPart No. Description Price Ea.

76347 Punch - Oblong 1/4" x 3/8" $56.37

76348 Punch - Oblong 1/4" x 1/2" 56.37

76349 Punch - Oblong 11/32" x 1/2" 56.37

76350 Punch - Oblong 11/32" x 43/64" 56.37

76351 Punch - Oblong 23/64" x 17/32" 56.37

76352 Punch - Oblong 3/8" x 19/32" 56.37

76353 Punch - Oblong 7/16" x 5/8" 56.37

76354 Punch - Oblong 1/2" x 3/4" 56.37

76355 Punch - Oblong 9/16" x 13/16" 56.37

75002.5PR OBLONG DIESPart No. Description Price Ea.

76300 Die - Oblong 1/4" x 3/8" A $59.12

76301 Die - Oblong 1/4" x 3/8" B 59.12

75643 Die - Oblong 1/4" x 1/2" A 41.24

75644 Die - Oblong 1/4" x 1/2" B 41.24

75645 Die - Oblong 11/32" x 1/2" A 41.24

75646 Die - Oblong 11/32" x 1/2" B 41.24

76302 Die - Oblong 11/32" x 43/64" A 59.12

76303 Die - Oblong 11/32" x 43/64" B 59.12

76304 Die - Oblong 23/64" x 17/32" A 59.12

76305 Die - Oblong 23/64" x 17/32" B 59.12

76306 Die - Oblong 3/8" x 19/32" A 59.12

76307 Die - Oblong 3/8" x 19/32" B 59.12

75647 Die - Oblong 7/16" x 5/8" A 41.24

75648 Die - Oblong 7/16" x 5/8" B 41.24

75655 Die - Oblong 7/16" x 5/8" C 63.85

75649 Die - Oblong 1/2" x 3/4" A 41.24

75650 Die - Oblong 1/2" x 3/4" B 41.24

75651 Die - Oblong 9/16" x 13/16" A 41.24

75652 Die - Oblong 9/16" x 13/16" B 41.24

PUNCH-PRO™ MACHINES

Part No. Description Price Ea.

0752102 75002.5PR 115V Punch-Pro $1848.55

0752202 75002.5PR 230V Punch-Pro 1848.55

0754102 75004PR 115V Punch-Pro 2476.70

0754202 75004PR 230V Punch-Pro 2476.70

0756102 75006PR 115V Punch-Pro 3729.41

0756202 75006PR 230V Punch-Pro 3729.41

0760102 76000PR 115V Punch-Pro 1793.27

0760202 76000PR 230V Punch-Pro 1793.27

75002.5PR ROUND PUNCHESPart No. Description Price Ea.

76334 Punch - Round 15/64" $41.24

76335 Punch - Round 1/4" 41.24

76336 Punch - Round 5/16" 41.24

76337 Punch - Round 11/32" 41.24

76338 Punch - Round 3/8" 41.24

76339 Punch - Round 7/16" 41.24

75910 Punch - Round 15/32" 41.24

76340 Punch - Round 1/2" 41.24

76341 Punch - Round 9/16" 41.24

76342 Punch - Round 19/32" 41.24

76343 Punch - Round 5/8" 41.24

76344 Punch - Round 11/16" 41.24

75911 Punch - Round 23/32" 41.24

76345 Punch - Round 3/4" 41.24

75002.5PR ROUND DIESPart No. Description Price Ea.

76308 Die - Round 15/64" SA (5/64-1/8THK) $38.49

76309 Die - Round 15/64" SB (5/64-1/4THK) 38.49

76310 Die - Round 1/4" SA (5/64-1/8THK) 38.49

76311 Die - Round 1/4" SB (5/64-1/4THK) 38.49

76312 Die - Round 5/16" SA (5/64-1/8THK) 38.49

76313 Die - Round 5/16" SB (5/64-1/4THK) 38.49

76314 Die - Round 11/32" SA (5/64-1/8THK) 38.49

76315 Die - Round 11/32" SB (5/64-1/4THK) 38.49

76316 Die - Round 3/8" SA (5/64-1/8THK) 38.49

76317 Die - Round 3/8" SB (5/64-1/4THK) 38.49

75450 Die - Round 3/8" C (19/64" MAX) 63.85

76318 Die - Round 7/16" SA (5/64-1/8THK) 38.49

76319 Die - Round 7/16" SB (5/64-1/4THK 38.49

75451 Die - Round 7/16" C (19/64" MAX) 63.85

75912 Die - Round 15/32" SA (5/64-1/8THK) 38.49

75913 Die - Round 15/32" SB (5/64-1/4THK 38.49

HOLE PUNCH MACHINES & 75002.5PR PUNCHES & DIES

75002.5PR ROUND DIESPart No. Description Price Ea.

76320 Die - Round 1/2" SA (5/64-1/8THK) $38.49

76321 Die - Round 1/2" SB (5/64-1/4THK) 38.49

75452 Die - Round 1/2" C (19/64" MAX) 63.85

76322 Die - Round 9/16" SA (5/64-1/8THK) 38.49

76323 Die - Round 9/16" SB (5/64-1/4THK) 38.49

75453 Die - Round 9/16" C (19/64" MAX) 63.85

76324 Die - Round 19/32" SA (5/64-1/8THK) 38.49

76325 Die - Round 19/32" SB (5/64-1/4THK) 38.49

76326 Die - Round 5/8" SA (5/64-1/8THK) 38.49

76327 Die - Round 5/8" SB (5/64-1/4THK) 38.49

76328 Die - Round 11/16" SA (5/64-1/8THK) 38.49

76329 Die - Round 11/16" SB (5/64-1/4THK) 38.49

75915 Die - Round 23/32" SA (5/64-1/8THK) 38.49

75916 Die - Round 23/32" SB (5/64-1/4THK) 38.49

76330 Die - Round 3/4" SA (5/64-1/8THK) 38.49

76331 Die - Round 3/4" SB (5/64-1/4THK) 38.49

15

75004PR PUNCHES & DIES

75004PR OBLONG PUNCHESPart No. Description Price Ea.

76347 Punch - Oblong 1/4" x 3/8" $56.37

76348 Punch - Oblong 1/4" x 1/2" 56.37

76349 Punch - Oblong 11/32" x 1/2" 56.37

76350 Punch - Oblong 11/32" x 43/64" 56.37

76351 Punch - Oblong 23/64" x 17/32" 56.37

76352 Punch - Oblong 3/8" x 19/32" 56.37

76353 Punch - Oblong 7/16" x 5/8" 56.37

76354 Punch - Oblong 1/2" x 3/4" 56.37

76355 Punch - Oblong 9/16" x 13/16" 56.37

75004PR OBLONG DIESPart No. Description Price Ea.

76300 Die - Oblong 1/4" x 3/8" A $59.12

76301 Die - Oblong 1/4" x 3/8" B 59.12

75643 Die - Oblong 1/4" x 1/2" A 41.24

75644 Die - Oblong 1/4" x 1/2" B 41.24

75645 Die - Oblong 11/32" x 1/2" A 41.24

75646 Die - Oblong 11/32" x 1/2" B 41.24

76302 Die - Oblong 11/32" x 43/64" A 59.12

76303 Die - Oblong 11/32" x 43/64" B 59.12

76304 Die - Oblong 23/64" x 17/32" A 59.12

76305 Die - Oblong 23/64" x 17/32" B 59.12

76306 Die - Oblong 3/8" x 19/32" A 59.12

76307 Die - Oblong 3/8" x 19/32" B 59.12

75647 Die - Oblong 7/16" x 5/8" A 41.24

75648 Die - Oblong 7/16" x 5/8" B 41.24

75655 Die - Oblong 7/16" x 5/8" C 63.85

75649 Die - Oblong 1/2" x 3/4" A 41.24

75650 Die - Oblong 1/2" x 3/4" B 41.24

75963 Die - Oblong 1/2" x 3/4" C 63.85

75651 Die - Oblong 9/16" x 13/16" A 41.24

75652 Die - Oblong 9/16" x 13/16" B 41.24

75964 Die - Oblong 9/16" x 13/16" C 63.85

75004PR ROUND PUNCHESPart No. Description Price Ea.

76334 Punch - Round 15/64" $41.24

76335 Punch - Round 1/4" 41.24

76336 Punch - Round 5/16" 41.24

76337 Punch - Round 11/32" 41.24

76338 Punch - Round 3/8" 41.24

76339 Punch - Round 7/16" 41.24

75910 Punch - Round 15/32" 41.24

76340 Punch - Round 1/2" 41.24

76341 Punch - Round 9/16" 41.24

76342 Punch - Round 19/32" 41.24

76343 Punch - Round 5/8" 41.24

76344 Punch - Round 11/16" 41.24

75911 Punch - Round 23/32" 41.24

76345 Punch - Round 3/4" 41.24

76346 Punch - Round 25/32" 41.24

75004PR ROUND DIESPart No. Description Price Ea.

76308 Die - Round 15/64" SA (5/64-1/8THK) $38.49

76309 Die - Round 15/64" SB (5/64-1/4THK) 38.49

76310 Die - Round 1/4" SA (5/64-1/8THK) 38.49

76311 Die - Round 1/4" SB (5/64-1/4THK) 38.49

76312 Die - Round 5/16" SA (5/64-1/8THK) 38.49

76313 Die - Round 5/16" SB (5/64-1/4THK) 38.49

76314 Die - Round 11/32" SA (5/64-1/8THK) 38.49

76315 Die - Round 11/32" SB (5/64-1/4THK) 38.49

76316 Die - Round 3/8" SA (5/64-1/8THK) 38.49

76317 Die - Round 3/8" SB (5/64-1/4THK) 38.49

75450 Die - Round 3/8" C (19/64" MAX) 43.68

76318 Die - Round 7/16" SA (5/64-1/8THK) 38.49

76319 Die - Round 7/16" SB (5/64-3/8THK) 38.49

75451 Die - Round 7/16" C (19/64" MAX) 43.68

75912 Die - Round 15/32" SA (5/64-1/8THK) 38.49

75913 Die - Round 15/32" SB (5/64-3/8THK) 38.49

76320 Die - Round 1/2" SA (5/64-1/8THK) 38.49

76321 Die - Round 1/2" SB (5/64-3/8THK) 38.49

75452 Die - Round 1/2" C (19/64" MAX) 43.68

76322 Die - Round 9/16" SA (5/64-1/8THK) 38.49

76323 Die - Round 9/16" SB (5/64-3/8THK) 38.49

75453 Die - Round 9/16" C (19/64" MAX) 43.68

76324 Die - Round 19/32" SA (5/64-1/8THK) 38.49

76325 Die - Round 19/32" SB (5/64-3/8THK) 38.49

76326 Die - Round 5/8" SA (5/64-1/8THK) 38.49

76327 Die - Round 5/8" SB (5/64-3/8THK) 38.49

75959 Die - Round 5/8" C (19/64" MAX) 43.68

76328 Die - Round 11/16" SA (5/64-1/8THK) 38.49

76329 Die - Round 11/16" SB (5/64-3/8THK) 38.49

75960 Die - Round 11/16" C (19/64" MAX) 43.68

75915 Die - Round 23/32" SA (5/64-1/8THK) 38.49

75916 Die - Round 23/32" SB (5/64-3/8THK) 38.49

76330 Die - Round 3/4" SA (5/64-1/8THK) 38.49

76331 Die - Round 3/4" SB (5/64-3/8THK) 38.49

75961 Die - Round 3/4" C (19/64" MAX) 43.68

76332 Die - Round 25/32" SA (5/64-1/8THK) 38.49

76333 Die - Round 25/32" SB (5/64-3/8THK) 38.49

75962 Die - Round 25/32" C (19/64" MAX) 43.68

16



76359 Punch - Round 7/16" $62.87

76360 Punch - Round 1/2" 62.87

76361 Punch - Round 9/16" 62.87

76362 Punch - Round 5/8" 62.87

76363 Punch - Round 11/16" 62.87

76364 Punch - Round 3/4" 62.87

76365 Punch - Round 25/32" 62.87

76366 Punch - Round 13/16" 62.87

76367 Punch - Round 7/8" 62.87

76368 Punch - Round 15/16" 62.87


75578 Die - Round 7/16" SA (5/64-1/8THK) $38.50

75579 Die - Round 7/16" SB (5/64-3/8THK) 38.50

75616 Die - Round 7/16" CC (5/16 MAX.THK) 63.85

75581 Die - Round 1/2" SA (5/64-1/8THK) 38.50

75582 Die - Round 1/2" SB (5/64-3/8THK) 38.50


75584 Die - Round 9/16" SA (5/64-1/8THK) 38.50

75585 Die - Round 9/16" SB (5/64-1/2THK) 38.50


75588 Die - Round 5/8" SA (5/64-1/8THK) 38.50

75589 Die - Round 5/8" SB (5/64-1/2THK) 38.50


75592 Die - Round 11/16" SA (5/64-1/8THK) 38.50

75593 Die - Round 11/16" SB (5/4-1/2THK) 38.50


75596 Die - Round 3/4" SA (5/64-1/8THK) 38.50

75597 Die - Round 3/4" SB (5/64-1/2THK) 38.50


75600 Die - Round 25/32" A (5/64-1/8THK) 38.50

75601 Die - Round 25/32" SB (5/64-1/2THK) 38.50


75604 Die - Round 13/16" SA (5/64-1/8THK) 38.50

75605 Die - Round 13/16" SB (5/64-1/2THK) 38.50


75608 Die - Round 7/8" SA (5/64-1/8THK) 38.50

75609 Die - Round 7/8" SB (5/64-1/2THK) 38.50


75612 Die - Round 15/16" SA (5/64-1/8THK) 38.50

75613 Die - Round 15/16" SB (5/64-15/32THK) 38.50


76369 Punch - Oblong 7/16" x 5/8" $89.3276370 Punch - Oblong 1/2" x 3/4" 89.3276371 Punch - Oblong 9/16" x 13/16" 89.3276372 Punch - Oblong 11/16" x 13/16" 89.32


75709 Die - Oblong 7/16" x 5/8" A $59.1175710 Die - Oblong 7/16" x 5/8" B 59.1175723 Die - Oblong 7/16" x 5/8" CC 86.9075712 Die - Oblong 1/2" x 3/4" A 59.1175713 Die - Oblong 1/2" x 3/4" B 59.1175724 Die - Oblong 1/2" x 3/4" CC 86.9075715 Die - Oblong 9/16" x 13/16" A 59.1175716 Die - Oblong 9/16" x 13/16" B 59.1175725 Die - Oblong 9/16" x 13/16" CC 86.9075719 Die - Oblong 11/16" x 13/16" A 59.1175720 Die - Oblong 11/16" x 13/16" B 59.1175727 Die - Oblong 11/16" x 13/16" CC 86.90

17



76558 Punch - Round 5/32" $43.90

76559 Punch - Round 3/16" 43.90

76560 Punch - Round 7/32" 43.90

76561 Punch - Round 15/64" 43.90

76562 Punch - Round 1/4" 43.90

76563 Punch - Round 5/16" 43.90

76564 Punch - Round 11/32" 43.90

76565 Punch - Round 3/8" 43.90

76566 Punch - Round 7/16" 43.90

76567 Punch - Round 15/32" 43.90

76568 Punch - Round 1/2" 43.90

76569 Punch - Round 9/16" 43.90

76570 Punch - Round 19/32" 43.90


76571 Die - Round 5/32" SA (5/64THK) $44.02

76572 Die - Round 3/16" SA (5/64-.118THK) 44.02

76573 Die - Round 7/32" SA (5/64-.118THK) 44.02

76574 Die - Round 15/64" SA (5/64-1/8THK) 44.02

76575 Die - Round 15/64" SB (5/64-5/32THK) 44.02

76576 Die - Round 1/4" SA (5/64-1/8THK) 44.02

76577 Die - Round 1/4" SB (5/64-1/4THK) 44.02

76578 Die - Round 5/16" SA (5/64-1/8THK) 44.02

76579 Die - Round 5/16" SB (5/64-1/4THK) 44.02

76580 Die - Round 11/32" SA (5/64-1/8THK) 44.02

76581 Die - Round 11/32" SB (5/64-1/4THK) 44.02

76582 Die - Round 3/8" SA (5/64-1/8THK) 44.02

76583 Die - Round 3/8" SB (5/64-1/4THK) 44.02

76584 Die - Round 7/16" SA (5/64-1/8THK) 44.02

76585 Die - Round 7/16" SB (5/64-1/4THK) 44.02

76586 Die - Round 15/32" SA (5/64-1/8THK) 44.02

76587 Die - Round 15/32" SB (5/64-1/4THK) 44.02

76588 Die - Round 1/2" SA (5/64-1/8THK) 44.02

76589 Die - Round 1/2" SB (5/64-1/4THK) 44.02

76590 Die - Round 9/16" SA (5/64-1/8THK) 44.02

76591 Die - Round 9/16" SB (5/64-1/4THK) 44.02

76592 Die - Round 19/32" SA (5/64-1/8THK) 44.02

76953 Die - Round 19/32" SB (5/64-1/4THK) 44.02


76236 Die - Oblong 1/4" x 3/8" $52.86

76237 Die - Oblong 1/4" x 1/2" 52.86

76238 Die - Oblong 11/32" x 1/2" 52.86

76240 Die - Oblong 23/64" x 17/32" 52.86

76241 Die - Oblong 3/8" x 19/32" 52.86

76242 Die - Oblong 7/16" x 5/8" 52.86


76594 Punch - Oblong 1/4" x 3/8" $66.50

76595 Punch - Oblong 1/4" x 1/2" 66.50

76596 Punch - Oblong 11/32" x 1/2" 66.50

76597 Punch - Oblong 23/64" x 17/32" 66.50

76598 Punch - Oblong 3/8" x 19/32" 66.50

76599 Punch - Oblong 7/16" x 5/8" 66.50

18

Notes

19

Notes

HOUGEN MANUFACTURING, INC.3001 Hougen Drive • Swartz Creek, MI 48473Ph: (810) 635-7111 • Fax: (810) [email protected] • www.hougen.com

Form No. 03610GOV 3/20 © Hougen Manufacturing, Inc. 2020 Printed in U.S.A.

COMMERCIAL/INDUSTRIAL LIMITED WARRANTYHougen Manufacturing, Inc. warrants its Portable Magnetic Drills and Tornado II Paint Shakers for two (2) years, Electro-hydraulic Hole Punchers for one (1) year and other products for ninety (90) days from date of purchase against defects due to faulty material or workmanship and will repair or replace (at its option) without charge any items returned. This warranty is void if the item has been damaged by accident or unreasonable use, neglect, improper service, or other causes not arising out of defects in material or workmanship. No other expressed warranty is given or authorized. Hougen Manufacturing, Inc. disclaims any implied warranty of Merchantability or fitness for any period beyond the expressed warranty and shall not be liable for incidental or consequential damages. Some states do not allow exclusion of incidental or consequential damages or limitation on how long an implied warranty lasts and, if the law of such a state governs your purchase, the above exclusion and limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

To obtain warranty service, return the item(s), transportation prepaid to your nearest Factory Authorized Warranty Service Center, or to Hougen Manufacturing, Inc., 3001 Hougen Drive, Swartz Creek, MI 48473.

Hougen Patent NoticeThe products covered in this catalog may be covered by one or more of the following U.S. patents, foreign patents, and pending patents:

4619532 4632610 4952102 D445808 5902076 5145296 5624213 5607266 D447494 6280123

Photographs and specifications are accurate in detail at time of printing. Manufacturer reserves the right to make improvements and modifications to designs without prior notice.

Hougen, Hougen-Edge, Rotabroach, Trak-Star and Punch-Pro and their respective logos are proprietary trademarks of Hougen Manufacturing, Inc. Ogura and the Ogura logo are proprietary trademarks of Ogura & Co., Ltd., Vac-Pad is a proprietary trademark of Drillmate PTY, Ltd.

PORTABLE MAGNETIC DRILLS, HOLE PUNCHERS, ACCESSORIES …

Documents

Transcript of PORTABLE MAGNETIC DRILLS, HOLE PUNCHERS, ACCESSORIES …