Port Utilization Guide for Cisco Unified ICM/Contact ... · Port Utilization Guide ... with the IP...

Port Utilization Guide

for Cisco Unified ICM/Contact Center Enterprise & HostedRelease 7.5(1)

April 2011

Americas Headquarters

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134-1706

USA

http://www.cisco.com

Tel: 408 526-4000

800 553-NETS (6387)

Fax: 408 527-0833

THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE.ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTEDWITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OFANY PRODUCTS.THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKETTHAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THESOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A COPY.The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) aspart of UCBs public domain version of the UNIX operating system. All rights reserved. Copyright 1981, Regents of the University of California.NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED"AS IS" WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING,WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OR ARISINGFROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL DAMAGES,INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USETHIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarkscan be found at http://www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use ofthe word partner does not imply a partnership relationship between Cisco and any other company. (1005R)Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, andfigures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional andcoincidental.Copyright 2011 Cisco Systems, Inc. All rights reserved.

http://www.cisco.com/go/trademarks

Cisco ICM/IP Contact Center Port UtilizationThis document describes the ports used in an ICM/IPCC Hosted or Enterprise software.

This document provides a list of the TCP and UDP ports used by Cisco Contact Center products.It provides extremely important information for configuring both Quality of Service (QoS) andFirewall/VPN solutions on a network when there is an Architecture for Voice, Video andIntegrated Data (AVVID) solution implemented.

This document is intended primarily for network administrators.

Port listing are presented in a table format. Where applicable formulas are used so that you cancalculate the ports beyond instance 0.

For port utilization of Cisco Email Server (CEM), Cisco Collaboration Server (CCS), and CiscoMedia Blender (CMB) when used in 7.5(`), see Cisco Contact Center Product Port UtilizationGuide (with ICM/IP Contact Center Enterprise 6.0(0) (http://www.cisco.com/univercd/cc/td/doc/product/icm/port_uti/port60.pdf).

Warning: The information this document provides is based on default configurationsettings. If you are working in a live network, ensure that you understand the componentsinstalled and the associated ports in use.

This chapter contains the following topics:

• Port Utilization Table Column Definitions, page 4• Cisco ICM/IP Contact Center Enterprise Edition Port Utilization , page 4• Cisco Agent Desktop (CAD) Port Utilization , page 12• Cisco Remote Monitoring Suite (RMS) Port Utilization , page 14• Cisco Unified Contact Center Management Portal Port Utilization, page 16• Cisco Unified Automated Administrator for Symposium (AAS) Port Utilization, page 17• Cisco Unified Expert Advisor Port Utilization, page 18• Cisco Unified CRM Connector, page 19• Cisco Voice Integration to Genesys Call Center, page 20

Port Utilization Guide for Cisco Unified ICM/Contact Center Enterprise & Hosted Release 7.5(1)

3

Chapter 1

http://www.cisco.com/univercd/cc/td/doc/product/icm/port_uti/port60.pdf

http://www.cisco.com/univercd/cc/td/doc/product/icm/port_uti/port60.pdf

Port Utilization Table Column Definitions

The columns in the Port Utilization tables in this document describe the following:

• Server or Application Protocol:

A value representing the Server or Application and where applicable the open or proprietaryapplication protocol.

• Server Protocol/Port:

An identifier for the TCP or UDP port that the Server or application is listening on, alongwith the IP address for incoming connection requests when acting as a server.

• Remote Protocol/Port:

The identifier for the TCP or UDP port that the remote service or application is listening on,along with the IP address for incoming connection requests when acting as the server.

• Remote Device:

The remote application or device making a connection to the server or service specified bythe protocol; or listening on the remote protocol/port.

Note: The source port the local application or service uses to connect to a remote device’sdestination port is not specified because it is always dynamically assigned by the OperatingSystem. In most cases, this port is assigned randomly above TCP/UDP 1024.

Cisco ICM/IP Contact Center Enterprise Edition Port Utilization

For Product Revisions: ICM 7.5(1), CTI OS 7.5(1), Support Tools 2.1(0)

Some port definitions use a formula, for example:

TCP 40007 + (Instance Number * 40)

In the formula above, for instance 0, the port is 40007, for instance 1 the port is 40047, forinstance 2 the port is 40087, etc.

Table 1: Cisco ICM/IP Contact Center Enterprise Edition Port Utilization

NotesRemote DeviceRemote

Protocol/Port

Server Protocol/PortServer or Application

Protocol

Private Network at theCentral Controller site

ICM Router (Side A)(MDS)

ICM Router (Side B)(MDS)

• Private Low:

TCP 41004 + (InstanceNumber * 40)


4

Chapter 1: Cisco ICM/IP Contact Center Port Utilization

Port Utilization Table Column Definitions


Protocol/Port


Protocol

Note: UDP Ports are notused if QoS is enabled on

• Private Medium:


the ICM Router privateinterface.

• Private High:


• State Xfer for CIC:


• State Xfer for CLGR:


• State Xfer for HLGR:


• State Xfer for RTR:


UDP 39500 - 39999

Public Network(Test-Other-Side)

ICM PG (Side A)(pgagent)


ICM PG (Side B)(pgagent)

Private NetworkICM PG1 (Side A)ICM PG1 (Side B)(MDS)

• Private Low:


Note: UDP Ports are notused if QoS is enabled onthe ICM PG privateinterface.• Private Medium:


• Private High:


• State Xfer for OPC:


5




Protocol/Port


Protocol


UDP 39500 - 39999

Private NetworkICM PG2 (Side A)ICM PG2 (Side B)MDS

• Private Low:


Note: UDP Ports are notused if QoS is enabled onthe ICM PG privateinterface.• Private Medium:


• Private High:


• State Xfer for OPC:


UDP 39500 - 39999

Public NetworkConnecting the PG to theCentral Controller

ICM PG (pgagent)ICM Router (Side A)DMP (ccagent)

• Public Low:


Router to pre-5.0 PGcommunication.• Public Medium:


Note: UDP Ports are notused if QoS is enabled onthe ICM PG privateinterface.• Public High:


UDP 39500 - 39999

Public NetworkConnecting the PG to theCentral Controller

ICM PG (pgagent)ICM Router (Side B)DMP (ccagent)

• Public Low:


Router to pre-5.0 PGcommunication.• Public Medium:


6




Protocol/Port


Protocol


Note: UDP Ports are notused if QoS is enabled onthe ICM PG privateinterface.• Public High:


UDP 39500 - 39999

Real Time FeedAW (Distributor)TCP 40007 + (InstanceNumber * 40)

ICM Router A (rtfeed)

Real Time FeedAW (Distributor)TCP 41007 + (InstanceNumber * 40)

ICM Router B (rtfeed)

ReplicationAW Historical DataServer (HDS)


ICM Logger (Side A)


ReplicationAW Historical DataServer (HDS)


ICM Logger (Side B)


Real Time feedClient AWTCP 48008 + (InstanceNumber * 40)

Primary AWDistributor (rtfeed)

Real Time feedClient AWTCP 49008 + (InstanceNumber * 40)

Secondary AWDistributor (rtfeed)

Public NetworkConnecting the NAM tothe CICM

NAM Router (CIC)UDP 40025 + (InstanceNumber * 40)

CICM Router (Side A)(INCRPNIC)

Public NetworkConnecting the NAM tothe CICM

NAM Router (CIC)UDP 41025 + (InstanceNumber * 40)

CICM Router (Side B)(INCRPNIC)

Distributor, WebView, Internet Script Editor

LoggerTCP 1433MSSQL

Distributor

Webview withSSL-enabled

WebView ClientsTCP 80HTTP

Authentication only,requires HTTP as well asHTTPS


7




Protocol/Port


Protocol

WebView, IPCCWeb Administration,

TCP 443HTTPS

and Internet ScriptEditor Clients

Multichannel applicationintegration

Clients RMI RegistryTCP 1099CONAPI

IPCC Outbound Dialer

Cisco CallManagerTCP 2000SCCP

Receive ports forreservation calls

Voice GatewayUDP 32000–32100

UDP 39100-39200

RTP

TFTP serverUDP 69TFTP

EphemeralTFTP File Transfer

CTI and CTI Object Server

ARM InterfaceSide AGED-188 (CTI Server)

CTI OS ServerTCP 42027 + (InstanceNumber * 40)

CAD ServerSide B


Applicable to first CTIOS instance.

CTI OS Client

CTI OS Server Peers

TCP 42028CTI OS Server

Multi-instance CTI OSand Hosted IPCC requirea custom port be defined.CAD Desktop

Desktop SilentMonitoring

CTI OS ClientUDP 39200CTI OS SupervisorDesktop

TCP 42228CTIOS Silent MonitorService

Support for screen callcontext

Siebel serverTCP 42228Cisco Enterprise DataStore


8




Protocol/Port


Protocol

Cisco Support Tools

Support ToolsApplication Server

TCP 39100Support Tools NodeAgent

Support Tools ServerAdministrationClient

TCP 8189Tomcat: HTTPS

TDM/IP Peripherals

IP ProcessCommunications

JTAPICisco CallManagerTCP 2748CTI/QBE

ICM/IVR messageinterface, VRU PIM

Customer VoicePortal (or ISN)

TCP 5000–5001GED-125

Cisco IP IVR

Media Routingprocess (e.g., CEM)

TCP 2000MR PIM

Note: For moreinformation on peripheral

TDM ProcessCommunications

communication, see the“ACD Supplement” userdocumentation for thespecifics switch you areusing.

CSTAAlcatel 4400TCP 2555Alcatel 4400 PIM

Used by real time bridgeAspect ACDTCP 8000Aspect PIM

Application bridgeAspect ContactCenter server

TCP 6101

TCP 6102

Aspect Contact Centerserver PIM

Event link

TCP 9001

Event linkAvaya ACDTCP 5678TCP 6060–6070Avaya PIM

CMS

CSTAEricsson MD100TCP 2555Ericsson MD100 PIM


9




Protocol/Port


Protocol

Connects to CTIserver,listens for VRU PIM

VRUTCP 3000–3030MIS Process

Nortel MeridianTCP 44444Nortel Meridian PIM

NEC NEAX2400TCP 1024NEC NEAX2400

Rockwell SpectrumACD

ConfigurableRockwell SpectrumPIM

Connects to CallbridgeCSTA Gateway

Siemens HICOMACD

ConfigurableSiemens HICOM 300E

Meridian linkNortel SymposiumTCP 3000Symposium PIM

Network Interface Controllers (NIC)

Refer to the TCP/IP-based NIC System Management Guide Supplements and setup parameters of the NIC, SS7 Gateway,or SCP connections for more details.

Windows Authentication and Remote Administration Ports

For more information, see: "Service overview and network port requirements for the Windows Server system” (MicrosoftKnowledge Base Article Q832017).

TCP 135RPC

UDP 135

TCP 139NetBIOS Session

TCP 137NetBIOS NameResolution

UDP 137

UDP 138NetBIOS Netlogon/Browsing

TCP 445SMB

UDP 445

TCP 389LDAP

UDP 389


10




Protocol/Port


Protocol

TCP 636LDAP SSL

TCP 3268LDAP GC

TCP 3269LDAP GC SSL

TCP 53DNS

UDP 53

TCP 88Kerberos

UDP 88

UDP 123NTP

see Q287932TCP 1433SQL Server

UDP 1434

Network Management and Remote Administration

UDP 161SNMP

UDP 162SNMP–Trap

UDP 514Syslog

TCP 23Telnet

TCP 3389RDP (TerminalServices)

TCP 5631pcAnywhere

UDP 5632

RealVNC 4.0TCP 5900VNC

TCP 5800 (Java HTTP)

Customer Interaction Analyzer

Call RecordingServer

TCP 80TCP 80HTTP File Transfer


11




Protocol/Port


Protocol


TCP 8080TCP 8080HTTP Data Replication


TCP 3389VPN/Terminal Services

Cisco Agent Desktop (CAD) Port Utilization

Cisco Agent Desktop (CAD) Port Utilization For Product Revisions: CAD 7.5(1)

Table 2: Cisco Agent Desktop (CAD) Port Utilization


Protocol/Port

Server Protocol/PortServer or

Application Protocol

Cisco Agent Desktop

Cisco Supervisor DesktopTCP 59020Desktop Monitor

Cisco Desktop Base ServicesTCP 59020Chat

CTI OS ServerTCP 42028CTI OS

Cisco Supervisor Desktop

ChatCisco Desktop Base ServicesTCP 59021Chat

VoIPCisco Desktop VoIP Monitor ServiceUDP 59010RTP

UDP 59012

PlaybackCisco Desktop Recording ServerUDP 59014RTP

UDP 59016

Cisco Desktop Base Services

Cisco Agent DesktopTCP 65432LRM


Cisco Agent DesktopTCP 59000Chat

Cisco Supervisor DesktopTCP 37350

Cisco Agent DesktopTCP 59004Enterprise


12




Protocol/Port




Cisco Agent DesktopTCP 59003Rascal


LDAPCisco Agent DesktopTCP 38983Directory


TomcatCisco Agent DesktopTCP 8088TrueUpdate


ForRedundancy

Cisco Desktop Base ServicesTCP 65432LRM

ForRedundancy

Cisco Desktop Base ServicesUDP 27871MSL

ForRedundancy

Cisco Desktop Base ServicesTCP 38983Directory

Cisco Desktop VoIP Monitor ServiceTCP 65432LRM

Cisco Desktop VoIP Monitor ServiceTCP 38983LDAP

Cisco Desktop Recording ServiceTCP 65432LRM

Cisco Desktop Recording ServiceTCP 38983LDAP

Cisco Desktop AdministratorTCP 65432LRM

Cisco Desktop AdministratorTCP 59004Enterprise

Cisco Desktop AdministratorTCP 38983Directory

Cisco Desktop AdministratorTCP 59010TAI

Cisco Desktop AdministratorTCP 59011Sync

TomcatCisco Desktop AdministratorTCP 8088TrueUpdate

Cisco Agent Desktop Browser EditionTCP 59012IPPA

Cisco Agent Desktop Browser EditionTCP 8088Tomcat

Call EventsCTI ServerSide A: TCP42027

GED-188

Side B: TCP43027

RascalCisco ICM DistributorTCP 1433MSSQL


13




Protocol/Port



Cisco CallManagerTCP 80DynamicAXL (SOAP)

Cisco Desktop VoIP Monitor Server

Cisco Agent DesktopTCP 59002Primary Server



Cisco Agent DesktopTCP 37606IP Discovery


Phone MACAddressLookup

Cisco CallManagerTCP 80DynamicAXL (SOAP)

Cisco Desktop Recording Server

Cisco Agent DesktopTCP 59005Primary Server



Cisco Supervisor DesktopTCP 59027IP Discovery


Cisco Agent DesktopUDP 59500 - 59700RTP

Cisco Desktop VoIP Monitor Server

Cisco Remote Monitoring Suite (RMS) Port Utilization

Cisco Remote Monitoring Suite (RMS) Port Utilization For Product Revisions: RMS 2.1

Table 3: Cisco Remote Monitoring Suite (RMS) Port Utilization


Protocol/Port


Protocol

Listener


14




Protocol/Port


Protocol

See "HOW TO: Configure RPCDynamic Port Allocation to Work

Logger

LGMapper

TCP/UDP 135

TCP/UDP 137

RPC, NetBIOS, SMB,Named Pipes

with Firewall" at Microsoft KB154596 for information about

LGArchiverTCP 139 configuring RPC to work with afirewall.

Listener (Peer)UDP 138

TCP/UDP 445

ListenerTCP 40012EMT

AlarmTracker

For information about RPC andhow to configure DCOM to work

LGMapperTCP/UDP 135

TCP 1024-65535

DCOM/RPC(AlarmTracker Client)

with firewalls, see "UsingDistributed COM with

Firewalls"1

For information about RPC andhow to configure DCOM to work

LGArchiverTCP/UDP 135

TCP 1024-65535

DCOM/RPC(AlarmTracker ClientTools) with firewalls, see "Using

Distributed COM with

Firewalls"2

SDDSN

(e.g. CVP)Third PartyTCP 40080SDDSN Phone Home

SDDSN Server <–> ListenerListenerTCP/UDP 135RPC, NetBIOS, SMB

TCP/UDP 137

TCP 139

UDP 138

TCP/UDP 445

1) http://www.microsoft.com/com/wpaper/dcomfw.asp

2) http://www.microsoft.com/com/wpaper/dcomfw.asp


15



http://www.microsoft.com/com/wpaper/dcomfw.asp






Cisco Unified Contact Center Management Portal Port Utilization

Cisco Unified Contact Center Management Portal Port Utilization for Product Revision 7.5(1)

Table 4: Cisco Unified Contact Center Management Portal Port Utilization

NotesRemote DeviceRemote Protocol/PortServer Protocol/PortServer or Application

Protocol

Browser

Web ApplicationServer (A or B)

TCP 80HTTP

Web ApplicationServer (A or B)

TCP 443HTTPS

Web Application Server A

DB Server ATCP 1433SQL

DB Server B

Domain ControllerUDP 389TCP 389LDAP

Web Application Server B


DB Server B

DB Server A

DB Server BTCP 7500Replication Services

DB Server BTCP 1433SQL

HDS (x) A

HDS (x) B

For ConAPIClient/CMS_JServerconnection

AW (x) ATCP 2099TCP 2099RMI Registry

CallManager (x)TCP 80HTTP

CallManager (x)TCP 443HTTPS

Domain ControllerUDP 389TCP 389LDAP

DB Sever BTCP 445UDP 445SMB over IP

DB Server B

DB Server ATCP 7500Replication Services


HDS (x) A

HDS (x) B


16


Cisco Unified Contact Center Management Portal Port Utilization


Protocol


AW (x) BTCP 2099TCP 2099RMI Registry

CallManager (x)TCP 80HTTP

CallManager (x)TCP 443HTTPS

AW A


DB Server ATCP 2099TCP 2099RMI Registry

Ping Port for ConAPIservices

AW AUDP 9000CmsNode

AW B


DB Server BTCP 2099TCP 2099RMI Registry

Ping Port for ConAPIservices

AW BUDP 9000CmsNode

These assume all server names are either TCP/IP addresses or DNS names (hence no NETBIOSport requirements).

Ports are also required to access all Unified Contact Center Management Portal servers forsupport reasons (either pcAnywhere or Terminal Services).

Note: This list does not include standard Windows ports such as DNS and Kerberos.

Cisco Unified Automated Administrator for Symposium (AAS) Port Utilization

Cisco Unified Automated Administrator for Symposium (AAS) Port Utilization for ProductRevision 7.5(1)

Table 5: Cisco Unified Automated Administrator for Symposium (AAS) Port Utilization


Protocol

TCP port 3000Meridian Link Services

TCP port 1550HOST Data Exchange

RTD Server on theSymposium

RPC port 10000 to10030

Real Time Dataconnection

RMI connectionPort 1009AAS fromAdministration andData Server


17


Cisco Unified Automated Administrator for Symposium (AAS) Port Utilization


Protocol

For communicationwith Administrationand Data Server

Port 5555AAS fromAdministration andData Server

Note:

Cisco Unified Expert Advisor Port Utilization

The following table shows which UDP and TCP ports are used by the Cisco Unified ExpertAdvisor OAMP (Operations Console) Server, Runtime Servers and Reporting Server.

Note: In most cases (marked with an asterisk) the port numbers are configurable , so what isshown here represents the defaults which are in effect when the system is installed.

Table 6: Cisco Unified Expert Advisor Port Utilization


Protocol/Port

Server

Protocol/Port

Server or

Application

Protocol

Operations Console secureport.

TCP 443HTTPS

Operations Consolenon-secure port.

TCP 80HTTP

ActiveMQ message brokerconnections to Cisco

Cisco Unified Expert AdvisorRuntime Server and Cisco

TCP 6666OpenWire

Unified Expert AdvisorOperations Console.

Unified Expert AdvisorReporting Server

ActiveMQ message brokerconnections to Cisco

Cisco Unified Expert AdvisorRuntime Server

TCP 61615OpenWire

Unified Expert AdvisorOperations Console.

SIP secure communication.Cisco Unified Presence, UnifiedCVP, and Cisco UnifiedCommunication Manager

TCP 5061 *TCP 5061 *SIP over TLS

SIP non-securecommunication.

Cisco Unified Presence, UnifiedCVP, and Cisco UnifiedCommunication Manager

UDP/TCP 5060 *UDP/TCP 5060 *SIP

Cisco Unified ExpertAdvisor to Unified ICMCommunication.

Unified ICM ACMI (Gateway)PIM

TCP 42067ACMI

Note: IM is performed overthe SIP connection between

IM

Cisco Unified ExpertAdvisor Runtime and Ciso


18


Cisco Unified Expert Advisor Port Utilization


Protocol/Port

Server

Protocol/Port

Server or

Application

Protocol

Unified Presence. See SIPentries above.

Note:

• * denotes that port is user configurable. Port listed is the default port.

• OpenWire specification is available at http://activemq.apache.org/openwire-version-2-specification.html.

Cisco Unified CRM Connector

For Product Revision 1.0(1)

Table 7: Cisco Unified CRM Connector for SAP


Protocol

SAP ICI connectionTCP 8080 (however,this port can be

CRM Connector forSAP

adjusted via theregistry)

CRM Connector forSAP

TCP 42029CRM DataStore forSAP

Table 8: Cisco Unified CRM Connector for Microsoft CRM, Oracle PeopleSoft, Salesforce.com


Protocol

"Default Web Site" inIIS Manager.

.NET Adapter,Administration Tool

TCP 80CRM Connector Server

MSCRM only.MSCRM ClientTCP 81MSCRM Server

Configurable in\Program

CRM AdaptersTCP 5666CRM Connector Server

Files\Cisco\CRMConnector\MCIS\Config.ini

Remoting Port.Agent DesktopTCP 5558.NET Adapter

Default port for side A.Configurable in the

Cisco CTI ServerTCP 42027CRM Connector Server

Config.ini file[CTIModule Setting]Port_A.


19


Cisco Unified CRM Connector

http://activemq.apache.org/openwire-version-2-specification.html

http://activemq.apache.org/openwire-version-2-specification.html


Protocol

Default port for side B.Configurable in the

Cisco CTI Server TCP 44027CRM Connector Server

Config.ini file[CTIModule Setting]Port_B.

Configurable under\Program

Server AdministrationTool

TCP 65372CRM Connector Server

Files\Cisco\CRMConnector\MCIS\Config.iniand \ProgramFiles\Cisco\CRMConnector\ ServerAdministrationTool\WebComponent\server.config

Cisco Voice Integration to Genesys Call Center


Protocol

CSTAGenesys T-ServerAlcatel A4400

TCP 2555 (however,this port can be

Genesys SystemInteroperabilityManager adjusted via the

registry)


20


Cisco Voice Integration to Genesys Call Center

Port Utilization Guide for Cisco Unified ICM/Contact ... · Port Utilization Guide ... with the IP...

Documents

Transcript of Port Utilization Guide for Cisco Unified ICM/Contact ... · Port Utilization Guide ... with the IP...