Pop PDF - Free Crane Specs2).pdf · 4-section full power synchronized telescoping boom....
Transcript of Pop PDF - Free Crane Specs2).pdf · 4-section full power synchronized telescoping boom....
mantiscranes.com
FEATURES15010
77 Ton Tele-Boom Crawler Crane
Large access doors, spacious machinery compartments simplify preventative maintenance and service of the crane.
Cameras display the winch as well as the blind area directly behind the crane. Full color video display in operator cab is standard equipment.
Spacious cab, adjustable seat, and conveniently located controls are common in all Tadano Mantis Cranes.
No other craNe combiNes so maNy valuable features:
Pick-and-carry the full crane load chart through 360°. Lift and walk...even with tracks retracted. Climb steeper grades, thanks to minimized counterweight and low center of gravity.
Pull through deep mud without bogging down. Telescope or lift the boom with a full load on the hook. Save time and money on the job due to low clearance height, retract on-the-fly tracks and telescopic boom.
Independent hydrostatic track drives allow pivot turns and counter rotation
Hydraulic tool circuit option powers wide choice of Mantis-approved tools.
Tadano AML-C rated capacity indicator provides continuousfeedback of crane lift position and data
Standard operators cab tilts up for improved operator comfort. Improved design walkways allow easy access into the cab.
PoWerliNe
taDa
No m
aNti
s cor
Pora
tioN
1705
Colu
mbi
a Ave
nue •
Fran
klin
, TN
3706
4 US
A • T
oll-F
ree:
1-80
0-27
2-33
25 •
Fax:
615-
790-
6803
• m
antis
cran
es.co
m
Pile DriviNg
418-03/11
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
DIMENSIONSSPECIFICATIONSmaximum liftiNg caPacity77 ton at 10 feet (70t at 3.0m)
boom 4-section full power synchronized telescoping boom. Synchronized telescoping system consists of two double acting hydraulic cylinders with load holding valves and extension and retraction cables. •RetractedLength:37’6”(11.4m) •ExtendedLength:111’6”(34m) •ExtensionTime:102s •ElevatingAngles:-1°to78° •ElevatingTime:64s •BoomHead:Seven,19inch(483mm)diametercastnylonsheavesonheavy-dutyrollerbearings
(5loadbearingand2leadinsheaves) •AuxiliaryBoomHead:Quickreeve,single19inch(483mm)diameterhigh-strength,castnylon
sheave mounted on a heavy-duty roller bearing. •HookBlock:80ton(72.5t)hookblock-Five19inch(483mm)diametersheavesmountedon
heavy duty roller bearings with swivel hook and safety latch. •HeadacheBall:12ton(11t)ballincludesaswivelhookwithasafetylatch.
WiNches Planetary geared two-speed winch includes a bent axis hydraulic motor, multi-disc internal brake, counterbalance valve, grooved drum and cable follower. Drum rotation indicator is included •MainWinch -RopeDiameterandLength:¾”x700ft(19mmx213m) -Singlelinepull:17,590lb(78.2kN)(firstlayer) -Singlelinespeed:225ft/min(68.6m/min)(4thlayer) •AuxiliaryWinch -RopeDiameterandLength:¾”x350ft(19mmx107m) -Singlelinepull:17,590lb(78.2kN)(firstlayer) -Singlelinespeed:225ft/min(68.6m/min)(atthe4thlayer)
travel Eachsideframecontainsapilotcontrolled,two-speedtrackdrivewithhydraulicaxialpistonmotorandparking brake. Travel system provides skid steering and counter rotation. •Lowtravelspeed:0.6mph(1.0km/h) •Hightravelspeed:1.7mph(2.8km/h) •Gradeability(unladen):68%
loaD momeNt iNDicator & aNti -tWo blockTADANOAML-CRatedCapacityLimiterandAnti-TwoBlocksystem •Controlfunctionshutdown.Audibleandvisualwarnings •LCDscreenprovidesacontinuousdisplayofworkingboomlength,boomangle,workingload
radius,tipheight,parts-of-line(operatorset),machinetrackconfiguration(operatorset),relativeload moment, maximum permissible load and actual load.
•Optional3-colorlightbarforexternalindicationofloadstate.
oPerator’s cabFully-enclosed, air conditioned all-steel modular cab with lockable swinging door, acoustical lining, anti-slip floor and tinted safety glass. •Cabtilts20°. •Rearviewcamerasareappropriatelylocatedasarethreeremotecontrolworklights. •2-speedwindshieldwiper,topglasswiper •Six-wayadjustablefabricseatwithheadrest,seatbelt •Four-wayelectronicarmrestmountedjoystickscontrolswing,boomextend,mainwinch,auxiliary
winchandboomhoist.Electronicfootpedalscontrolthetravelandswingservicebrakefunctions. •Selectablecontrolmodesfor:FineControl,Auger,andhandcontroloftravelfunctions. •Seatandarmrestterminationswitchesimmediatelydisableallhydraulicfunctionsastheoperator
rises from the seat or lifts the left hand armrest.Dashinstrumentation:tachometer,voltmeter,oilpressuregauge,temperaturegauge,hourmeterandfuelgauge.Indicatorsareprovidedforcranelevel,loadmoment,drumrotation,airfilterrestriction,hydraulicoiltemperatureandfilterrestriction,engineoilpressureandtemperature.
eNgiNe •Make/Model:CumminsQSB6.7 •Rating:260hp(194kW)@2100RPM •Alternator:130amp
electrical system12VDC
couNterWeight Total35,000lb(15,875kg)rearcounterweight(Twopieces)
sWiNg Gearmotordrivingaplanetarygearreducerwithashaftmountedpinion,externalgearshearballslewbearing bolted to the superstructure and the carbody allows the superstructure to rotate 360° •SwingSpeed:0-2.2rpm •SwingParkingBrake:Springappliedfailsafebrakewithhydraulicreleasethatiscontrolledfromthe
operators cab •SwingServiceBrake:Hydraulicallyapplied,controlledthroughfootactuatedpedal •HouseLockSystem:2-position,manuallypinned
hyDraulic system •HydraulicPumps:Twohighpressure,variableaxialpistonpumpswithloadsenseandpower
limitingcontrolforcranefunctions.Onevariableaxialpistonpumpforcoolingloop •DirectionalValves:Multiplepressureandflowcompensatedvalveswithintegratedreliefvalves
controlled by hydraulic pilot signals. •Pumpoutput:154gpm(583l/min)@2100RPMenginespeed.4,800psi(330bar)maximum
pressure •Filtration:5micron.
siDe frames Two welded steel side frames are paired with a track group. The side frames extend and retract hydraulically and are controlled from the cab. •TrackRollers:TwotopandtwelvebottomsealedrollersoneachtrackframeIdler:Oilfilled,self
lubricating with spring type tensioner •TrackShoes:36inch(900mm)3-barsemigrouser
oPtioNal equiPmeNt •BoomExtension:Latticetype,swingaway -Length:30feet(9.1m) -Head:Two,19-inch(483mm)diametercastnylonsheavesonheavy-dutyrollerbearings -Max.LiftingHeight:142ft(43.3m) •BoomJib:Latticetype,swingaway,storesalongboomextension -Length:20feet(6.1m) -OffsetAngles:15°&30° -Max.LiftingHeight:162feet(49.4m) •50ton(45t)hookblock-Three18inch(457mm)steelsheaves,swivelhook&safetylatch •CarbodyJackSystem:Hydrauliccylinderjacksystemandpendantcontroltofacilitatequickremoval
oftrackframesfor9’10”(3.0m)shippingwidth. •TrackShoes:30inch(760mm)3-barsemigrouser •TrackShoes:31.5inch(800mm)flatshoe •AugerReadyPackage:Includeshoses,fastenersandstowagebracketassemblymountedtothe
basesectionoftheboomwithaflowcapabilityof34gpm(130l/min) •CompleteAugerPackage:Addsatwospeedaugermotor/gearboxandone60inch(1.52m)kelly
bartotheAugerReadyPackage. •ToolCircuit:Provides5gpm(23l/min)and10gpm(45l/min)at2,500PSI(176bar)througha50
foot(15.2m)twinhosereelwithquickdisconnectfittingstooperateopencentertools. •FreeFallHoists:Allwinchesareavailableincontrolledfreefallconfigurations. •ColdWeatherPackages:Coldweatheroptionsareavailableforoperationto-40°C(Consultfactory
for application support) •WorkPlatform:ModelWP750–36inx72in(0.9mx1.8m),allsteel,welded,twoperson
platform with maximum capacity of 750 lbs (340 kg). •PoleClaw:Heavy-dutypoleclawwithhydraulicclampandtilt. •Radiocontrolpackage. •Rotationresistantwirerope. •PileDrivingLeadReadyPackage:IncludesHydraulicvalves,in-cabcontrolpendant,andquick
coupler panel.
1501077 Ton Tele-Boom Crawler Crane
WiDths, Weights, aND grouND Pressures*
Shoe Width
Overall WidthArea Ground
PressureWorking WeightRetracted Extended
30 in (762mm)
12ft0in (3.66 m)
18ft2in (5.54 m)
12,360in² (7.97m²)
11.0 psi (0.77kg/cm²)
135,730 lb (61,419kg)
36 in (900mm)
12ft6in (3.81m)
18ft8in (5.69m)
14,850in² (9.57m²)
9.3psi (0.65kg/cm²)
137,554 lb (62,241kg)
* Crane equipped with: 111 ft 6 in boom, extension, jib, 75 ton hook block and 12 ton headache ball
111 ft 6 iN maiN boom, 30 ft exteNsioN & 20 ft jib
oPtioNal equiPmeNt
auger aND Pole claW light bar aND tool circuitWork Platform
VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE,
heavy-duty machines. We match massive steel
fabrications with diesel engines and state of the art
hydraulicstoprovideaPOWERFULcranethatmeetsthe
toughest demands in full load pick-and-carry as well
as lift applications.MANTIS… the one DEPENDABLE
crane that does it all on your jobsite
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
mantiscranes.com
FEATURES15010
77 Ton Tele-Boom Crawler Crane
Large access doors, spacious machinery compartments simplify preventative maintenance and service of the crane.
Cameras display the winch as well as the blind area directly behind the crane. Full color video display in operator cab is standard equipment.
Spacious cab, adjustable seat, and conveniently located controls are common in all Tadano Mantis Cranes.
No other craNe combiNes so maNy valuable features:
Pick-and-carry the full crane load chart through 360°. Lift and walk...even with tracks retracted. Climb steeper grades, thanks to minimized counterweight
and low center of gravity. Pull through deep mud without bogging down. Telescope or lift the boom with a full load on the hook. Save time and money on the job due to low clearance height, retract
on-the-fly tracks and telescopic boom. Independent hydrostatic track drives allow pivot turns
and counter rotation Hydraulic tool circuit option powers wide choice of Mantis-approved tools.
Tadano AML-C rated capacity indicator provides continuousfeedback of crane lift position and data
Standard operators cab tilts up for improved operator comfort. Improved design walkways allow easy access into the cab.
PoWerliNe
taDa
No m
aNti
s cor
Pora
tioN
1705
Colu
mbi
a Ave
nue •
Fran
klin
, TN
3706
4 US
A • T
oll-F
ree:
1-80
0-27
2-33
25 •
Fax:
615-
790-
6803
• m
antis
cran
es.co
m
Pile DriviNg
418-03/11
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
DIMENSIONSSPECIFICATIONSmaximum liftiNg caPacity77 ton at 10 feet (70t at 3.0m)
boom 4-section full power synchronized telescoping boom. Synchronized telescoping system consists of two double acting hydraulic cylinders with load holding valves and extension and retraction cables. •RetractedLength:37’6”(11.4m) •ExtendedLength:111’6”(34m) •ExtensionTime:102s •ElevatingAngles:-1°to78° •ElevatingTime:64s •BoomHead:Seven,19inch(483mm)diametercastnylonsheavesonheavy-dutyrollerbearings
(5loadbearingand2leadinsheaves) •AuxiliaryBoomHead:Quickreeve,single19inch(483mm)diameterhigh-strength,castnylon
sheave mounted on a heavy-duty roller bearing. •HookBlock:80ton(72.5t)hookblock-Five19inch(483mm)diametersheavesmountedon
heavy duty roller bearings with swivel hook and safety latch. •HeadacheBall:12ton(11t)ballincludesaswivelhookwithasafetylatch.
WiNches Planetary geared two-speed winch includes a bent axis hydraulic motor, multi-disc internal brake, counterbalance valve, grooved drum and cable follower. Drum rotation indicator is included •MainWinch -RopeDiameterandLength:¾”x700ft(19mmx213m) -Singlelinepull:17,590lb(78.2kN)(firstlayer) -Singlelinespeed:225ft/min(68.6m/min)(4thlayer) •AuxiliaryWinch -RopeDiameterandLength:¾”x350ft(19mmx107m) -Singlelinepull:17,590lb(78.2kN)(firstlayer) -Singlelinespeed:225ft/min(68.6m/min)(atthe4thlayer)
travel Eachsideframecontainsapilotcontrolled,two-speedtrackdrivewithhydraulicaxialpistonmotorandparking brake. Travel system provides skid steering and counter rotation. •Lowtravelspeed:0.6mph(1.0km/h) •Hightravelspeed:1.7mph(2.8km/h) •Gradeability(unladen):68%
loaD momeNt iNDicator & aNti -tWo blockTADANOAML-CRatedCapacityLimiterandAnti-TwoBlocksystem •Controlfunctionshutdown.Audibleandvisualwarnings •LCDscreenprovidesacontinuousdisplayofworkingboomlength,boomangle,workingload
radius,tipheight,parts-of-line(operatorset),machinetrackconfiguration(operatorset),relativeload moment, maximum permissible load and actual load.
•Optional3-colorlightbarforexternalindicationofloadstate.
oPerator’s cabFully-enclosed, air conditioned all-steel modular cab with lockable swinging door, acoustical lining, anti-slip floor and tinted safety glass. •Cabtilts20°. •Rearviewcamerasareappropriatelylocatedasarethreeremotecontrolworklights. •2-speedwindshieldwiper,topglasswiper •Six-wayadjustablefabricseatwithheadrest,seatbelt •Four-wayelectronicarmrestmountedjoystickscontrolswing,boomextend,mainwinch,auxiliary
winchandboomhoist.Electronicfootpedalscontrolthetravelandswingservicebrakefunctions. •Selectablecontrolmodesfor:FineControl,Auger,andhandcontroloftravelfunctions. •Seatandarmrestterminationswitchesimmediatelydisableallhydraulicfunctionsastheoperator
rises from the seat or lifts the left hand armrest.Dashinstrumentation:tachometer,voltmeter,oilpressuregauge,temperaturegauge,hourmeterandfuelgauge.Indicatorsareprovidedforcranelevel,loadmoment,drumrotation,airfilterrestriction,hydraulicoiltemperatureandfilterrestriction,engineoilpressureandtemperature.
eNgiNe •Make/Model:CumminsQSB6.7 •Rating:260hp(194kW)@2100RPM •Alternator:130amp
electrical system12VDC
couNterWeight Total35,000lb(15,875kg)rearcounterweight(Twopieces)
sWiNg Gearmotordrivingaplanetarygearreducerwithashaftmountedpinion,externalgearshearballslewbearing bolted to the superstructure and the carbody allows the superstructure to rotate 360° •SwingSpeed:0-2.2rpm •SwingParkingBrake:Springappliedfailsafebrakewithhydraulicreleasethatiscontrolledfromthe
operators cab •SwingServiceBrake:Hydraulicallyapplied,controlledthroughfootactuatedpedal •HouseLockSystem:2-position,manuallypinned
hyDraulic system •HydraulicPumps:Twohighpressure,variableaxialpistonpumpswithloadsenseandpower
limitingcontrolforcranefunctions.Onevariableaxialpistonpumpforcoolingloop •DirectionalValves:Multiplepressureandflowcompensatedvalveswithintegratedreliefvalves
controlled by hydraulic pilot signals. •Pumpoutput:154gpm(583l/min)@2100RPMenginespeed.4,800psi(330bar)maximum
pressure •Filtration:5micron.
siDe frames Two welded steel side frames are paired with a track group. The side frames extend and retract hydraulically and are controlled from the cab. •TrackRollers:TwotopandtwelvebottomsealedrollersoneachtrackframeIdler:Oilfilled,self
lubricating with spring type tensioner •TrackShoes:36inch(900mm)3-barsemigrouser
oPtioNal equiPmeNt •BoomExtension:Latticetype,swingaway -Length:30feet(9.1m) -Head:Two,19-inch(483mm)diametercastnylonsheavesonheavy-dutyrollerbearings -Max.LiftingHeight:142ft(43.3m) •BoomJib:Latticetype,swingaway,storesalongboomextension -Length:20feet(6.1m) -OffsetAngles:15°&30° -Max.LiftingHeight:162feet(49.4m) •50ton(45t)hookblock-Three18inch(457mm)steelsheaves,swivelhook&safetylatch •CarbodyJackSystem:Hydrauliccylinderjacksystemandpendantcontroltofacilitatequickremoval
oftrackframesfor9’10”(3.0m)shippingwidth. •TrackShoes:30inch(760mm)3-barsemigrouser •TrackShoes:31.5inch(800mm)flatshoe •AugerReadyPackage:Includeshoses,fastenersandstowagebracketassemblymountedtothe
basesectionoftheboomwithaflowcapabilityof34gpm(130l/min) •CompleteAugerPackage:Addsatwospeedaugermotor/gearboxandone60inch(1.52m)kelly
bartotheAugerReadyPackage. •ToolCircuit:Provides5gpm(23l/min)and10gpm(45l/min)at2,500PSI(176bar)througha50
foot(15.2m)twinhosereelwithquickdisconnectfittingstooperateopencentertools. •FreeFallHoists:Allwinchesareavailableincontrolledfreefallconfigurations. •ColdWeatherPackages:Coldweatheroptionsareavailableforoperationto-40°C(Consultfactory
for application support) •WorkPlatform:ModelWP750–36inx72in(0.9mx1.8m),allsteel,welded,twoperson
platform with maximum capacity of 750 lbs (340 kg). •PoleClaw:Heavy-dutypoleclawwithhydraulicclampandtilt. •Radiocontrolpackage. •Rotationresistantwirerope. •PileDrivingLeadReadyPackage:IncludesHydraulicvalves,in-cabcontrolpendant,andquick
coupler panel.
1501077 Ton Tele-Boom Crawler Crane
WiDths, Weights, aND grouND Pressures*
Shoe Width
Overall WidthArea Ground
PressureWorking WeightRetracted Extended
30 in (762mm)
12ft0in (3.66 m)
18ft2in (5.54 m)
12,360in² (7.97m²)
11.0 psi (0.77kg/cm²)
135,730 lb (61,419kg)
36 in (900mm)
12ft6in (3.81m)
18ft8in (5.69m)
14,850in² (9.57m²)
9.3psi (0.65kg/cm²)
137,554 lb (62,241kg)
* Crane equipped with: 111 ft 6 in boom, extension, jib, 75 ton hook block and 12 ton headache ball
111 ft 6 iN maiN boom, 30 ft exteNsioN & 20 ft jib
oPtioNal equiPmeNt
auger aND Pole claW light bar aND tool circuitWork Platform
VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE,
heavy-duty machines. We match massive steel
fabrications with diesel engines and state of the art
hydraulicstoprovideaPOWERFULcranethatmeetsthe
toughest demands in full load pick-and-carry as well
as lift applications.MANTIS… the one DEPENDABLE
crane that does it all on your jobsite
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
DIMENSIONSSPECIFICATIONSmaximum liftiNg caPacity77 ton at 10 feet (70t at 3.0m)
boom 4-section full power synchronized telescoping boom. Synchronized telescoping system consists of two double acting hydraulic cylinders with load holding valves and extension and retraction cables. •RetractedLength:37’6”(11.4m) •ExtendedLength:111’6”(34m) •ExtensionTime:102s •ElevatingAngles:-1°to78° •ElevatingTime:64s •BoomHead:Seven,19inch(483mm)diametercastnylonsheavesonheavy-dutyrollerbearings
(5loadbearingand2leadinsheaves) •AuxiliaryBoomHead:Quickreeve,single19inch(483mm)diameterhigh-strength,castnylon
sheave mounted on a heavy-duty roller bearing. •HookBlock:80ton(72.5t)hookblock-Five19inch(483mm)diametersheavesmountedon
heavy duty roller bearings with swivel hook and safety latch. •HeadacheBall:12ton(11t)ballincludesaswivelhookwithasafetylatch.
WiNches Planetary geared two-speed winch includes a bent axis hydraulic motor, multi-disc internal brake, counterbalance valve, grooved drum and cable follower. Drum rotation indicator is included •MainWinch -RopeDiameterandLength:¾”x700ft(19mmx213m) -Singlelinepull:17,590lb(78.2kN)(firstlayer) -Singlelinespeed:225ft/min(68.6m/min)(4thlayer) •AuxiliaryWinch -RopeDiameterandLength:¾”x350ft(19mmx107m) -Singlelinepull:17,590lb(78.2kN)(firstlayer) -Singlelinespeed:225ft/min(68.6m/min)(atthe4thlayer)
travel Eachsideframecontainsapilotcontrolled,two-speedtrackdrivewithhydraulicaxialpistonmotorandparking brake. Travel system provides skid steering and counter rotation. •Lowtravelspeed:0.6mph(1.0km/h) •Hightravelspeed:1.7mph(2.8km/h) •Gradeability(unladen):68%
loaD momeNt iNDicator & aNti -tWo blockTADANOAML-CRatedCapacityLimiterandAnti-TwoBlocksystem •Controlfunctionshutdown.Audibleandvisualwarnings •LCDscreenprovidesacontinuousdisplayofworkingboomlength,boomangle,workingload
radius,tipheight,parts-of-line(operatorset),machinetrackconfiguration(operatorset),relativeload moment, maximum permissible load and actual load.
•Optional3-colorlightbarforexternalindicationofloadstate.
oPerator’s cabFully-enclosed, air conditioned all-steel modular cab with lockable swinging door, acoustical lining, anti-slip floor and tinted safety glass. •Cabtilts20°. •Rearviewcamerasareappropriatelylocatedasarethreeremotecontrolworklights. •2-speedwindshieldwiper,topglasswiper •Six-wayadjustablefabricseatwithheadrest,seatbelt •Four-wayelectronicarmrestmountedjoystickscontrolswing,boomextend,mainwinch,auxiliary
winchandboomhoist.Electronicfootpedalscontrolthetravelandswingservicebrakefunctions. •Selectablecontrolmodesfor:FineControl,Auger,andhandcontroloftravelfunctions. •Seatandarmrestterminationswitchesimmediatelydisableallhydraulicfunctionsastheoperator
rises from the seat or lifts the left hand armrest.Dashinstrumentation:tachometer,voltmeter,oilpressuregauge,temperaturegauge,hourmeterandfuelgauge.Indicatorsareprovidedforcranelevel,loadmoment,drumrotation,airfilterrestriction,hydraulicoiltemperatureandfilterrestriction,engineoilpressureandtemperature.
eNgiNe •Make/Model:CumminsQSB6.7 •Rating:260hp(194kW)@2100RPM •Alternator:130amp
electrical system12VDC
couNterWeight Total35,000lb(15,875kg)rearcounterweight(Twopieces)
sWiNg Gearmotordrivingaplanetarygearreducerwithashaftmountedpinion,externalgearshearballslewbearing bolted to the superstructure and the carbody allows the superstructure to rotate 360° •SwingSpeed:0-2.2rpm •SwingParkingBrake:Springappliedfailsafebrakewithhydraulicreleasethatiscontrolledfromthe
operators cab •SwingServiceBrake:Hydraulicallyapplied,controlledthroughfootactuatedpedal •HouseLockSystem:2-position,manuallypinned
hyDraulic system •HydraulicPumps:Twohighpressure,variableaxialpistonpumpswithloadsenseandpower
limitingcontrolforcranefunctions.Onevariableaxialpistonpumpforcoolingloop •DirectionalValves:Multiplepressureandflowcompensatedvalveswithintegratedreliefvalves
controlled by hydraulic pilot signals. •Pumpoutput:154gpm(583l/min)@2100RPMenginespeed.4,800psi(330bar)maximum
pressure •Filtration:5micron.
siDe frames Two welded steel side frames are paired with a track group. The side frames extend and retract hydraulically and are controlled from the cab. •TrackRollers:TwotopandtwelvebottomsealedrollersoneachtrackframeIdler:Oilfilled,self
lubricating with spring type tensioner •TrackShoes:36inch(900mm)3-barsemigrouser
oPtioNal equiPmeNt •BoomExtension:Latticetype,swingaway -Length:30feet(9.1m) -Head:Two,19-inch(483mm)diametercastnylonsheavesonheavy-dutyrollerbearings -Max.LiftingHeight:142ft(43.3m) •BoomJib:Latticetype,swingaway,storesalongboomextension -Length:20feet(6.1m) -OffsetAngles:15°&30° -Max.LiftingHeight:162feet(49.4m) •50ton(45t)hookblock-Three18inch(457mm)steelsheaves,swivelhook&safetylatch •CarbodyJackSystem:Hydrauliccylinderjacksystemandpendantcontroltofacilitatequickremoval
oftrackframesfor9’10”(3.0m)shippingwidth. •TrackShoes:30inch(760mm)3-barsemigrouser •TrackShoes:31.5inch(800mm)flatshoe •AugerReadyPackage:Includeshoses,fastenersandstowagebracketassemblymountedtothe
basesectionoftheboomwithaflowcapabilityof34gpm(130l/min) •CompleteAugerPackage:Addsatwospeedaugermotor/gearboxandone60inch(1.52m)kelly
bartotheAugerReadyPackage. •ToolCircuit:Provides5gpm(23l/min)and10gpm(45l/min)at2,500PSI(176bar)througha50
foot(15.2m)twinhosereelwithquickdisconnectfittingstooperateopencentertools. •FreeFallHoists:Allwinchesareavailableincontrolledfreefallconfigurations. •ColdWeatherPackages:Coldweatheroptionsareavailableforoperationto-40°C(Consultfactory
for application support) •WorkPlatform:ModelWP750–36inx72in(0.9mx1.8m),allsteel,welded,twoperson
platform with maximum capacity of 750 lbs (340 kg). •PoleClaw:Heavy-dutypoleclawwithhydraulicclampandtilt. •Radiocontrolpackage. •Rotationresistantwirerope. •PileDrivingLeadReadyPackage:IncludesHydraulicvalves,in-cabcontrolpendant,andquick
coupler panel.
1501077 Ton Tele-Boom Crawler Crane
WiDths, Weights, aND grouND Pressures*
Shoe Width
Overall WidthArea Ground
PressureWorking WeightRetracted Extended
30 in (762mm)
12ft0in (3.66 m)
18ft2in (5.54 m)
12,360in² (7.97m²)
11.0 psi (0.77kg/cm²)
135,730 lb (61,419kg)
36 in (900mm)
12ft6in (3.81m)
18ft8in (5.69m)
14,850in² (9.57m²)
9.3psi (0.65kg/cm²)
137,554 lb (62,241kg)
* Crane equipped with: 111 ft 6 in boom, extension, jib, 75 ton hook block and 12 ton headache ball
111 ft 6 iN maiN boom, 30 ft exteNsioN & 20 ft jib
oPtioNal equiPmeNt
auger aND Pole claW light bar aND tool circuitWork Platform
VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE,
heavy-duty machines. We match massive steel
fabrications with diesel engines and state of the art
hydraulicstoprovideaPOWERFULcranethatmeetsthe
toughest demands in full load pick-and-carry as well
as lift applications.MANTIS… the one DEPENDABLE
crane that does it all on your jobsite
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com
mantiscranes.com
FEATURES15010
77 Ton Tele-Boom Crawler Crane
Large access doors, spacious machinery compartments simplify preventative maintenance and service of the crane.
Cameras display the winch as well as the blind area directly behind the crane. Full color video display in operator cab is standard equipment.
Spacious cab, adjustable seat, and conveniently located controls are common in all Tadano Mantis Cranes.
No other craNe combiNes so maNy valuable features:
Pick-and-carry the full crane load chart through 360°. Lift and walk...even with tracks retracted. Climb steeper grades, thanks to minimized counterweight
and low center of gravity. Pull through deep mud without bogging down. Telescope or lift the boom with a full load on the hook. Save time and money on the job due to low clearance height, retract
on-the-fly tracks and telescopic boom. Independent hydrostatic track drives allow pivot turns
and counter rotation Hydraulic tool circuit option powers wide choice of Mantis-approved tools.
Tadano AML-C rated capacity indicator provides continuousfeedback of crane lift position and data
Standard operators cab tilts up for improved operator comfort. Improved design walkways allow easy access into the cab.
PoWerliNe
taDa
No m
aNti
s cor
Pora
tioN
1705
Colu
mbi
a Ave
nue •
Fran
klin
, TN
3706
4 US
A • T
oll-F
ree:
1-80
0-27
2-33
25 •
Fax:
615-
790-
6803
• m
antis
cran
es.co
m
Pile DriviNg
418-03/11
View thousands of Crane Specifications on FreeCraneSpecs.comView thousands of Crane Specifications on FreeCraneSpecs.com