pool product catalogue

1pool product catalogue COMPANY CONTACTS

USE TO NAVIGATE THIS DIGITAL BROCHURE...

eartheco – our company

eartheco is a wholly South African company, 100% owned & staffed by South Africans.

Our company philosophy focuses on four key areas:

1. designing and producing exceptional products, 2. doing business in a way which gives back to the natural environment, 3. providing a secure, meaningful and pleasant working environment for our staff, 4. interacting with suppliers and customers in a respectful and mutually beneficial way.

eartheco was always structured to enable employees to contribute to the protection of the environment – we actively work with the Wilderness Leadership School, the Pilanesberg Wildlife Trust and the North West Parks Board to birth opportunities for environmental consciousness and to provide protection for endangered species, particularly the Rhino populations in the Pilanesberg.

In supporting our company and its products you are also assisting in this activity.Thank you!

PROVIDING EXCEPTIONAL EQUIPMENT TO THE SWIMMING POOL TRADE SINCE 2002.

2

NAVIGATING THIS DIGITAL BROCHURE

Using your cursor/mouse

move to your desired page.

TAB LINKS:

(indicated by your cursor changing when over a link) takes you to the labelled option & the icons, bottom right, take you to:

HOME PAGE

PRODUCT LIST

CONTACT INFO

3

eartheco Product List CATALOGUE CONTENTS

1. Pumps 4

2. Weirs 25

3. Pool Lights 31

NAVIGATING THIS DIGITAL BROCHURE

Using your cursor/mouse

move to your desired page.

TAB LINKS:

(indicated by your cursor changing when over a link) takes you to the labelled option & the icons, bottom right, take you to:

HOME PAGE

PRODUCT LIST

CONTACT INFO

eartheco Pumps & MOTOR COMPLETE

eartheco E -Que Pump eartheco RD Pump

4

1) Self Priming,Centrifugal Type Pumpswith closed vane impellers.

– 0.60kW K71– 0.75kW K71– 0.75kW K80– 1.10kW K80

• Fitted with leaf trap strainers,mechanical shaft sealsand squirrel cage inductionmotors with heavy dutyball bearings.

The pump type and serial number are on a nameplate attached to the motor shroud, and the motor data is in a nameplate attached to the side of the motor.

Always quote pump type, serial number and motor make in any correspondence or when ordering spares.

E-Que Pump & MOTOR COMPLETE

General

0.60kW K71 0.75kW K71 0.75kW K80 1.10kW K80

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

5

eartheco recommends the use of ecogene pool care products.

Detailed Information 2) Installation

A good installation of your pool pump will result in many years of trouble free operation. Careful attention must be paid to the following:

2.1 Piping The suction and discharge pipes must not be smaller in diameter than the pump connection i.e. Suction pipe diameter(0) 50mm, discharge pipe diameter(0) 50mm minimum. On 1.1 kW & 1.5kW a suction pipe of 63mm should be used. Suitable unions should be placed in the lines adjacent to the pump connections in case the pump body has to be removed, where pump unions do not already perform this function. Do not support the pipework on the pump or vice versa. Make sure all pipe connections are completely water/air tight by using a suitable pipe jointing compound. Keep suction pipe as short as possible and only use pipes that are sufficiently rated to work at a minimum of 4 bar pressure. The suction line should enter the pump straight and horizontally for a length of at least 4 x the diameter of the pipe.

2.2 Pump Positioning (Important for motor cooling) We recommend that the pump be positioned at a level of no more than ± 300mm above your pool water level. Again we stress the fact to keep the suction line as short as possible. A minimum clearance of 150mm must be allowed behind the motor fan cowling to the nearest obstruction to ensure proper ventilation and easy access for servicing. The pump house/box must also have provision for adequate drainage facilities.

2.3 VentilationAs the electric motor is fan cooled, sufficient ventilation must be allowed at all times during operation. Failure to do this will cause overheating resulting in premature bearing failure and/or motor burnout. If your pump house/box does not have ventilation holes the lid or door should be left open during operation of the pump.

Installation, Operating, Maintenance Instructions & Warranty

PAGE 1/5

E-Que Pump & MOTOR COMPLETE 0.60kW K71 0.75kW K71 0.75kW K80 1.10kW K80

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

6

www.ecogene.co.za

www.ecogene.co.za


7

Detailed Information 2.4 Drainage

Flooding of the electric motor is the most common cause of motor failure. It is essential that adequate drainage be provided in the pump house/box. If the motor fails as a result of flooding then there is no warranty whatsoever irrespective of how the water penetrated the motor. The pump must be protected from rain and flooding.

2.5 Electric Connections These must be carried out by suitably qualified people only. Do not change the motor position as it is provided with a drain hole at the bottom to drain off any water which may leak past the mechanical shaft seal. A cable gland must be fitted to the terminal box. 3 phase pumps must be installed with an appropriately rated overload protection device. NOTE: The length of cable supplied with the pump is for testing only and should be replaced with suitably rated cable. Minimum specification 60245IEC66 (HO7RN-F).

2.6 Rotation Before checking the rotation, drain the pump leaf trap of water. The correct rotation is clockwise when viewed from the motor end. Pumps with 220 volt single phase motors are wired at our factory for the correct rotation. 3 phase pumps require the rotation to be checked before operating to prevent a damaged impeller.

3) Commissioning A) Remove the clear leaf trap lid and fill the pump with water at the leaf trap until it flows out of the suction pipe connection. The thumb screw that holds down the leaf trap lid must only be hand tightened. Do not use a spanner, pliers or pipe wrench. B) switch on the pump and allow to run. The pump will take a short while to prime fully and then deliver full quantity. The pump must run smoothly and quietly. The pump should need no further priming by hand. On 380 volt motors check the rotation corresponds with the arrow on the fan cowl. [continues onto next page]

PAGE 2/5



0.60kW K71 0.75kW K71 0.75kW K80 1.10kW K80

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

www.ecogene.co.za

www.ecogene.co.za


8

Detailed Information C) Diatomaceous earth(D.E.) filters

should now be charged by pouring the D.E. into the weir of the swimming pool. D) Sand filters must be filled with water, then charged with sand directly into the filter and not through the pump or the weir. E) The motor temp. under normal conditions will rise to approximately 40°C above the ambient temp.

4) Hints for Good Running A) Clean the leaf trap in the pump and pool weir regularly. B) Do not allow dust to accumulate on the motor as this affects the cooling process. C) Do not leave foreign objects lying on the motor. D) Change the rubber “0” Ring in the lid at 1 year intervals to maintain a good seal. The face on the leaf trap where the “0” Ring seats must be kept clean and smooth. E) DO NOT RUN PUMP DRY or under closed valve conditions for extended periods. F) Backwash your filter once a week, or when the pressure exceeds 50% above the starting operating pressure. G) No vaseline or petroleum based lubricants should be used for lubricating

“0” Rings or seals. Only silicone paste should be used.

5) Filters & Automatic Pool Cleaning Devices There are basically two types of filters i.e. pressure filters and vacuum filters. A) Pressure Filters: This type of filter is installed on the pressure discharge side of the pump. Most are fitted with a pressure gauge to indicate when the filter requires backwashing or cleaning, alternatively weekly backwashing is advised (refer to filter manufacturer’s instructions). B) Vacuum Filters: This type of filter is fitted on the suction side of the pump and built into the weir of the swimming pool. This type of filter must be cleaned at least once a week. C) Automatic Cleaning Devices (APC): When such a device is fitted on the suction side of the pump, the pump and weir leaf traps must be cleaned at least once a day. When using such devices, a shortened bearing life of the pump motor can be expected, especially if the leaf trap is not cleaned regularly. DO NOT USE an APC without a bypass or skimmer valve.

PAGE 3/5



0.60kW K71 0.75kW K71 0.75kW K80 1.10kW K80

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

www.ecogene.co.za

www.ecogene.co.za

Detailed Information 6) Problem Diagnosis

Isolate the motor before checking for problems.

6.1 Motor fails to start: A) Check that incoming mains wires are connected to the correct motor terminals. B) Check that the mains supply coming into the motor at the terminals corresponds with the data on the motor name plate. C) Remove the fan cowl of the motor or insert a screwdriver in the slot of the motor shaft at the fan end and check if the shaft can be rotated freely. If this is not the case, the motor will have to be removed to check if foreign objects are jammed in the impeller. D) Reset thermal overload (if fitted) at the reset button on motor terminal box.

6.2 Motor hums but will not start: A) Remove the fan cowl of the motor or insert a screwdriver in the slot of the motor shaft at the fan end and check if the shaft can be rotated freely. If this is not the case, the motor will have to be removed to check for faulty bearings, or if foreign objects have become jammed in the

impeller. If the shaft can be rotated, check that the capacitor is functioning. B) Check that phases of motor windings are not down to earth. If they are the motor has been wet or is burned out.

6.3 Pump runs but will not pump or pumps poorly A) Check direction of rotation. B) Make sure pump is properly primed. C) Make sure correct valves are open. D) Make sure that leaf trap and filter are clean. Backwash filter if necessary. E) Make sure that leaf trap lid and “0” Ring are sealing properly and that lid lock handle is tightened firmly. This can normally be diagnosed by air bubbles entering the pool at return point.

6.4 Water leaks from drain seal plate flange: The mechanical seal needs to be replaced.

6.5 Motor runs noisily: A) Clean leaf trap and check for any obstruction on the suction line. B) If this does not help, the motor bearings may need replacement.

PAGE 4/5



0.60kW K71 0.75kW K71 0.75kW K80 1.10kW K80


9

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

www.ecogene.co.za

www.ecogene.co.za

Detailed Information 7) Warranty

If the manual instructions, featured here, are adhered to, there will be many years of trouble-free pump operation.

eartheco will not be held liable for any damages, or delays caused by failure to comply with the provision of the manual, or accepted engineering practices.

NOTE: Warranty claims will be declared invalid if the content of the manual is not adhered to.

The warranty constitutes the entire warranty with respect to the goods and is in lieu of all other warranties, expressed or implied, including any implied warranty by distributors or sales persons and/or implied warranty of fitness for a particular purpose.

eartheco specifically warrants that all eartheco equipment products are free from defects in material and workmanship for a period of 24 months.

The warranty period is calculated from the date of installation. Warranty periods for repaired or replaced goods remains at the period specified from the original installation date of the equipment.

This warranty is against defective materials and workmanship on the product and specifically does not cover travel /installation / labour costs associated with the removal and/or reinstallation of the product.

eartheco or its distributor’s sole obligation to the end user under this warranty, will be at their option to: 1. repair eartheco products or parts found to be defective in material or workmanship. OR in unusual circumstances and only at their discretion, 2. replace eartheco products or issue a credit note at the purchase price for such defective goods / parts only.

WARNING Pollution of the working fluid could occur due to leakage of lubricants.

PAGE 5/5



0.60kW K71 0.75kW K71 0.75kW K80 1.10kW K80


10

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

www.ecogene.co.za

www.ecogene.co.za

11


PART DESCRIPTION PART NUMBER

1 Flinger Ring S02SEA0192 Seal Plate Flange S02EQP0023 Brass Bush S02EQS1014 Mechanical Seal S02MSS1585 Pump Foot/Stand S02 EPS 1016 Pump Body/Sludge Trap S02EQP0017 50mm I/D Union Flange S05UNI1018 Union Nut Black S05UNI3039 50mm 0/D Union Flange S05UNI202

10 Union O-ring S02SEA01811 E-Que Pump Clamp S02EQP01112 SWP10C Clamp Pad 252545513 SWP1OB Ball Screw Brass Stud 252460514 SWP10 Lid Lock Handle (knob) 250182915 Pump Lid S02LID00416 Pump Lid O-ring S02SEA01717 Basket S02BAS00518 Diffuser O-ring S02SEA01819 Diffuser S02EQP00320 Flange O-ring S02SEA01621 M8x30 Cheese Head Screw S02BWN01722 Flange Bolt O-ring S02SEA02023 M6x25 Hex Head Screw S02BWN11624 Diverter Ring S02PND00125 Clamp Arm Assembly S02EQP006A 1.1kW Motor S02EQM011

0.75kW Motor S02EQM0750.6kW Motor S02EQM060

B 1.1 kW Impeller S02EQI0110.75kW Impeller S02EQI0750.6 kW Impeller S02EQI060

C Foot Pad – 80 Frame S02EPS002Foot Pad – 71 Frame S02EPS002

D Terminal Box – 80 Frame 2515828Terminal Box – 71 Frame 2515728

E Fan Cowl – 80 Frame 2510619Fan Cowl – 71 Frame 2510519

9

10 6

5

C

A

ED232221201918

15

16

17

25 14

13

12

11

B 2

1

24

8787 4343

CROSS SECTION VIEW

x4 x4 x8

0.60kW K71 0.75kW K71 0.75kW K80 1.10kW K80

E-QUE PUMP & MOTOR COMPLETE PART NUMBER

0.60kW K71 02EQP060 0.75kW K71 02EQP075 0.75kW K80 02EQP076 1.10kW K80 02EQP110

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

Exploded View: Parts & Part Numbers

12


COMPLETE PUMP A Clip-on foot feature

B Rubberised Motor Support

C Reinforced Body and Seal Plate

D Large Orientated Basket

E 50mm Union

F Internal 1.5” BSP Thread

IMPELLER & SHAFT SEAL

1 Heavy Duty Ball Bearing

2Bearing Retaining Clip [to limit axial movement]

3 Brass Sleeve

4 Brass Impeller Insert

5 High Quality Mechanical Seal

6 Flinger Ring

EXPLODED VIEW, PARTS & PART NUMBERS

3

5

BD

C

A

F

E

0.60kW K71 0.75kW K71 0.75kW K80 1.10kW K80

1

2

4

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

Cross Section View (unique features)

6

13


25

20

15

10

5

06 12 18 24 30 36

1.1kW

0.60kW K71 0.75kW K71 0.75kW K80 1.10kW K80

MAXIMUM TOTAL DYNAMIC HEAD (m)

SIZE (kW) METERS (m) 0.60 14 0.75 16 1.10 17.5

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

Total Dynamic Head in

Meters (m)

Cubic Meters/Hour (m3/h)

Pump Curves: Performance Graph

0.60kW

0.75kW

14


Dimensional Drawing

0.75kW/0.60kW

1.1kW

50mm Union included 1.5"BSP Internal thread

0.75kW/ 0.60kW 1.1kW

A

D D

0.60kW K71 0.75kW K71 0.75kW K80 1.10kW K80

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

0.75kW/0.60kW

1.1kW

50mm Union included 1.5"BSP Internal thread

0.75kW/ 0.60kW 1.1kW

A

D D

15

RD Pump & MOTOR COMPLETE 0.60kW 0.75kW 1.10kW 1.10kW 380V0.75kW 380V

1) Self Priming,Centrifugal Type Pumpswith open vane impellers.

– 0.60kW– 0.75kW– 1.10kW– 0.75kW 380V– 1.10kW 380V

• Fitted with leaf trap strainers,mechanical shaft sealsand squirrel cage inductionmotors with heavy dutyball bearings.

The pump type and serial number are on a nameplate attached to the motor shroud, and the motor data is in a nameplate attached to the side of the motor.

Always quote pump type, serial number and motor make in any correspondence or when ordering spares.

GeneralGENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS


2) Installation A good installation of your pool pump will result in many years of trouble free operation. Careful attention must be paid to the following:

2.1 Piping The suction and discharge pipes must not be smaller in diameter than the pump connection i.e. Suction pipe diameter(0) 50mm, discharge pipe diameter(0) 50mm minimum. On 1.1 kW & 1.5kW a suction pipe of 63mm should be used. Suitable unions should be placed in the lines adjacent to the pump connections in case the pump body has to be removed, where pump unions do not already perform this function. Do not support the pipework on the pump or vice versa. Make sure all pipe connections are completely water/air tight by using a suitable pipe jointing compound. Keep suction pipe as short as possible and only use pipes that are sufficiently rated to work at a minimum of 4 bar pressure. The suction line should enter the pump straight and horizontally for a length of at least 4 x the diameter of the pipe.

2.2 Pump Positioning (Important for motor cooling) We recommend that the pump be positioned at a level of no more than ± 300mm above your pool water level. Again we stress the fact to keep the suction line as short as possible. A minimum clearance of 150mm must be allowed behind the motor fan cowling to the nearest obstruction to ensure proper ventilation and easy access for servicing. The pump house/box must also have provision for adequate drainage facilities.

2.3 VentilationAs the electric motor is fan cooled, sufficient ventilation must be allowed at all times during operation. Failure to do this will cause overheating resulting in premature bearing failure and/or motor burnout. If your pump house/box does not have ventilation holes the lid or door should be left open during operation of the pump.


PAGE 1/5

Detailed Information


16

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

www.ecogene.co.za

www.ecogene.co.za




2.4 DrainageFlooding of the electric motor is the most common cause of motor failure. It is essential that adequate drainage be provided in the pump house/box. If the motor fails as a result of flooding then there is no warranty whatsoever irrespective of how the water penetrated the motor. The pump must be protected from rain and flooding.

2.5 Electric Connections These must be carried out by suitably qualified people only. Do not change the motor position as it is provided with a drain hole at the bottom to drain off any water which may leak past the mechanical shaft seal. A cable gland must be fitted to the terminal box. 3 phase pumps must be installed with an appropriately rated overload protection device. NOTE: The length of cable supplied with the pump is for testing only and should be replaced with suitably rated cable. Minimum specification 60245IEC66 (HO7RN-F).

2.6 Rotation Before checking the rotation, drain the pump leaf trap of water. The correct rotation is clockwise when viewed from the motor end. Pumps with 220 volt single phase motors are wired at our factory for the correct rotation. 3 phase pumps require the rotation to be checked before operating to prevent a damaged impeller.

3) Commissioning A) Remove the clear leaf trap lid and fill the pump with water at the leaf trap until it flows out of the suction pipe connection. The thumb screw that holds down the leaf trap lid must only be hand tightened. Do not use a spanner, pliers or pipe wrench. B) switch on the pump and allow to run. The pump will take a short while to prime fully and then deliver full quantity. The pump must run smoothly and quietly. The pump should need no further priming by hand. On 380 volt motors check the rotation corresponds with the arrow on the fan cowl. [continues onto next page]

PAGE 2/5


17

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

www.ecogene.co.za

www.ecogene.co.za




C) Diatomaceous earth(D.E.) filters should now be charged by pouring the D.E. into the weir of the swimming pool. D) Sand filters must be filled with water, then charged with sand directly into the filter and not through the pump or the weir. E) The motor temp. under normal conditions will rise to approximately 40°C above the ambient temp.

4) Hints for Good Running A) Clean the leaf trap in the pump and pool weir regularly. B) Do not allow dust to accumulate on the motor as this affects the cooling process. C) Do not leave foreign objects lying on the motor. D) Change the rubber “0” Ring in the lid at 1 year intervals to maintain a good seal. The face on the leaf trap where the “0” Ring seats must be kept clean and smooth. E) DO NOT RUN PUMP DRY or under closed valve conditions for extended periods. F) Backwash your filter once a week, or when the pressure exceeds 50% above the starting operating pressure. G) No vaseline or petroleum based lubricants should be used for lubricating

“0” Rings or seals. Only silicone paste should be used.

5) Filters & Automatic Pool Cleaning Devices There are basically two types of filters i.e. pressure filters and vacuum filters. A) Pressure Filters: This type of filter is installed on the pressure discharge side of the pump. Most are fitted with a pressure gauge to indicate when the filter requires backwashing or cleaning, alternatively weekly backwashing is advised (refer to filter manufacturer’s instructions). B) Vacuum Filters: This type of filter is fitted on the suction side of the pump and built into the weir of the swimming pool. This type of filter must be cleaned at least once a week. C) Automatic Cleaning Devices (APC): When such a device is fitted on the suction side of the pump, the pump and weir leaf traps must be cleaned at least once a day. When using such devices, a shortened bearing life of the pump motor can be expected, especially if the leaf trap is not cleaned regularly. DO NOT USE an APC without a bypass or skimmer valve.

PAGE 3/5


18

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

www.ecogene.co.za

www.ecogene.co.za




6) Problem Diagnosis Isolate the motor before checking for problems.

6.1 Motor fails to start: A) Check that incoming mains wires are connected to the correct motor terminals. B) Check that the mains supply coming into the motor at the terminals corresponds with the data on the motor name plate. C) Remove the fan cowl of the motor or insert a screwdriver in the slot of the motor shaft at the fan end and check if the shaft can be rotated freely. If this is not the case, the motor will have to be removed to check if foreign objects are jammed in the impeller. D) Reset thermal overload (if fitted) at the reset button on motor terminal box.

6.2 Motor hums but will not start: A) Remove the fan cowl of the motor or insert a screwdriver in the slot of the motor shaft at the fan end and check if the shaft can be rotated freely. If this is not the case, the motor will have to be removed to check for faulty bearings, or if foreign objects have become jammed in the

impeller. If the shaft can be rotated, check that the capacitor is functioning. B) Check that phases of motor windings are not down to earth. If they are the motor has been wet or is burned out.

6.3 Pump runs but will not pump or pumps poorly A) Check direction of rotation. B) Make sure pump is properly primed. C) Make sure correct valves are open. D) Make sure that leaf trap and filter are clean. Backwash filter if necessary. E) Make sure that leaf trap lid and “0” Ring are sealing properly and that lid lock handle is tightened firmly. This can normally be diagnosed by air bubbles entering the pool at return point.

6.4 Water leaks from drain seal plate flange: The mechanical seal needs to be replaced.

6.5 Motor runs noisily: A) Clean leaf trap and check for any obstruction on the suction line. B) If this does not help, the motor bearings may need replacement.

PAGE 4/5


19

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

www.ecogene.co.za

www.ecogene.co.za

7) Warranty If the manual instructions, featured here, are adhered to, there will be many years of trouble-free pump operation.

eartheco will not be held liable for any damages, or delays caused by failure to comply with the provision of the manual, or accepted engineering practices.

NOTE: Warranty claims will be declared invalid if the content of the manual is not adhered to.

The warranty constitutes the entire warranty with respect to the goods and is in lieu of all other warranties, expressed or implied, including any implied warranty by distributors or sales persons and/or implied warranty of fitness for a particular purpose.

eartheco specifically warrants that all eartheco equipment products are free from defects in material and workmanship for a period of 24 months.

The warranty period is calculated from the date of installation. Warranty periods for repaired or replaced goods remains at the period specified from the original installation date of the equipment.

This warranty is against defective materials and workmanship on the product and specifically does not cover travel /installation / labour costs associated with the removal and/or reinstallation of the product.

eartheco or its distributor’s sole obligation to the end user under this warranty, will be at their option to: 1. repair eartheco products or parts found to be defective in material or workmanship. OR in unusual circumstances and only at their discretion, 2. replace eartheco products or issue a credit note at the purchase price for such defective goods / parts only.

WARNING Pollution of the working fluid could occur due to leakage of lubricants.

PAGE 5/5





GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

20

www.ecogene.co.za

www.ecogene.co.za

21


234

567

8

9

11

12

13

15 17 18 19

B

C

14

16

2X

20

21

1

A

10

RD Pump & MOTOR COMPLETE

CROSS SECTION VIEW


1 SWP27 Flinger Ring 25033302 SWP2 Seal Plate (8 Hole) 25128293 SWP22 Mechanical Seal 5/8”

(RD.CP937A) 5800752

4 SWP5 Diffuser Ring 25007295 SWP9 Base 25219296 SWP15 Bolt M10x40 Galv.

(cadmium plated) 5603819

7 SWP7 Sludge Trap (machined) 25249558 SWP26B Sludge Trap Handle (only) 25032669 SWP10C Clamp Pad Polyprop 2524655

10 Clamp Arm Complete 252501911 SWP10 Lid Lock

Handle Complete 2501829

12 SWP11 Sludge Trap Lid O-ring (153x6.5) 2502030

13 SWP8 Sludge Trap Lid 252415614 SWP7A Sludge Trap

Retaining Ring 2517555

15 SWP12 Sludge Trap Gasket Square 2502130

16 M8 Nut S/Steel 316 S02BWN00417 SWP6 Body Complete

with Stud (blue) 2517632

18 SWP13 Seal Ring 250223019 SWP 14C Body O-ring

164x3.5 (new) 2526130

20 SWP Bolt M8 x 40mm Galv. (cadmium plated) S02BWN005

21 M10 Nuts S/Steel S02BWN00722 SWP26A Sludge Trap Basket (only) 2503265A SWP1 Impeller 0.60kW 2512429

SWP1 Impeller 0.75kW 2512629SWP1 Impeller 1.10kW 2517829

B Motor 0.75kW 220V (RD pump) Bare Shaft 2503426

SWP1 Impeller 0 75kW 2512626 C Fan eartheco Motor Frame K71 2523528

Fan eartheco Motor Frame K80 (1.1) 2514928

RD PUMP & MOTOR COMPLETE PART NUMBER

0.60kW Complete SWP2525432 0.75kW Complete SWP2525433 1.10kW Complete SWP2525434 0.75kW Complete 380V SWP2525435 1.10kW Complete 380V SWP2525436

0.60kW 0.75kW 1.10kW 1.10kW 380V0.75kW 380V

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

x6

x2

x12

22


COMPLETE PUMP A Large Diameter Motor Flange

B Reinforced body and seal plate

C Large 2” BSP Intake

D Brass Ball Screw and Insert

E Highly Reinforced Open Impeller

IMPELLER & SHAFT SEAL

1 Heavy Duty Ball Bearing

2Bearing Retaining Clip [to limit axial movement]

3 Brass Sleeve

4 Brass Impeller Insert

5 High Quality Mechanical Seal

6 Flinger Ring


2

4

6

1

3

5

A

B

E

D

C

0.60kW 0.75kW 1.10kW 1.10kW 380V0.75kW 380V

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS


23


Pump Curves: Performance Graph

Total Dynamic Head in

Meters (m)

25

20

15

10

5

0

0.60kW0.75kW

1.1kW

5 10 15 20 25 30

Cubic Meters/Hour (m3/h)

MAXIMUM TOTAL DYNAMIC HEAD (m)

SIZE (kW) METERS (m) 0.60 17.5 0.75 17.5 1.10 18

0.60kW 0.75kW 1.10kW 1.10kW 380V0.75kW 380V

GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

24

Dimensional Drawing


GENERAL INFO

DETAILED INFO

CROSS SECTION

EXPLODED VIEW

PUMP CURVES

ALL PUMPS

DIMENSIONS

546mm 0.75kW/ 0.6kW570mm 1.1kW

250

mm

1.5" BSP2" BSP

220

mm

142mm 0.75kW/ 0.6kW162mm 1.1kW

255mm

416

mm

546mm 0.75kW/ 0.6kW570mm 1.1kW

250

mm

1.5" BSP2" BSP

220

mm

142mm 0.75kW/ 0.6kW162mm 1.1kW

255mm

416

mm

25

eartheco Weirs COMPLETE

eartheco E -Que Gunite Weir eartheco E -Que Vinyl Weir

26

General

Vinyl 03WEI003 / 03WEI004Gunite 03WEI001 / 03WEI002

Proud use of virgin materials. eartheco uses UV stabilised high-impact ABS– to ensure the weircan withstand theharsh environmentalconditions andprovide longevity.

– Gunite/White 03WEI001– Gunite/Black 03WEI002– Vinyl/White 03WEI003– Vinyl/Black 03WEI004

Two versions available in black and white:

• Gunite• Vinyl

• Used for building directly intomarbelite / concrete pool shells.

• No mounting features onthe throat of the weir for aseamless build.

• Designed for vinyl + fibreglasspool construction.

• Includes: mounting holes,durable faceplate, gasket +screws for mounting the throatof the weir to the pool shell.

Gunite Weir Vinyl Weir

E-Que Weir COMPLETE

GENERAL INFO

CROSS SECTION

EXPLODED VIEW

DIMENSIONS

DETAILED INFO

27

Detailed Information GENERAL INFO

CROSS SECTION

EXPLODED VIEW

DIMENSIONS

DETAILED INFO

E-Que Weir COMPLETE Vinyl 03WEI003 / 03WEI004Gunite 03WEI001 / 03WEI002

• Soft chemical resistant gaskets to improve sealing on uneven surfaces.

• 316 stainless screws.

• A faceplate bezel incorporating water level markings enhances aesthetics by covering the screws and mounting plate.

1) Buoyancy has been built into the weir flap to increase surface tension, improving the skimming action.

2) Deck lids and collars come in a variety of colours to match pool surrounds.

3) Weighted basket with rope handle.

4) Ramp lock vacuum lid with cuff to fit most automatic cleaner hoses.

Features & Benefits

Viny weirs come complete with:

1) The use of silicone sealants in this product may cause cracking as the solvent in most silicone sealants may attack the ABS plastic.

2) We recommend the use of high-quality PTFE thread tape to install the pipe fitting into the 2- inch BSP thread.

All of our care and technical expertise have gone into the manufacturing of this eartheco product.

It has been fully factory tested and strict quality standards have been applied at every stage of its production.

It’s imperative that the client to inspect the weir prior to installation to affect any warranty claim.

PLEASE NOTE: There will be no warranty on this product once it has been fitted / installed.

Installation Considerations

Warranty


27

www.ecogene.co.za

www.ecogene.co.za

28

PART DESCRIPTION PART NUMBER QTY.

1 EQ Wier Vinyl* Faceplate / White S03WEI003 1

EQ Wier Vinyl* Faceplate / Black S03WEI004

2 EQ Wier Vinyl* Faceplate / Flange White

S03WEI001

1 EQ Wier Vinyl* Faceplate / Flange Black

S03WEI101

Screw Weir: No.10 x 30 Pan Pozi Stainless Steel - Vinyl*

S03BWN001 12

3 EQ Wier Vinyl* Liner Gasket S03SEA004 24 EQ Weir Flap / White S03FLA006

1 EQ Weir Flap / Black S03FLA007

5 EQ Weir Half Flange** N/A 26 EQ Weir Body** N/A 17 EQ Weir Sump** N/A 18 Eartheco Weir Basket S03BAS001 19 EQ Vacuum Lid / Brown S03VAC003 1

10 EQ Vac-Lid Weir Cuff S03VAC303 111 EQ Weir Collar / Brown S03COL001

1EQ Weir Collar / Black S03COL003EQ Weir Collar / Beige S03COL005EQ Weir Collar / White S03COL006

12 EQ Weir Deck Lid / Beige S03LID001

1EQ Weir Deck Lid / Brown S03LID002EQ Weir Deck Lid / Black S03LID003EQ Weir Deck Lid / White S03LID006

* Vinyl – for Vinyl version only. ** With Complete Weir only.

ADDITIONAL RELATED PARTS PART NUMBER

8 SL Wier Basket S03BAS201 9 SL Vacuum Lid / White S03VAC201

AQUA Vacuum Lid / Blue S03VAC30112 SL Weir Deck Lid / Beige S03LID201

AQUA Weir Deck Lid / Brown S03LID301


E-Que Weir COMPLETE

GENERAL INFO

CROSS SECTION

EXPLODED VIEW

vDIMENSIONS

DETAILED INFO


CROSS SECTION VIEW

E-QUE WEIR COMPLETE PART NUMBER

EQ Weir Gunite White 03WEI001 EQ Weir Gunite Black 03WEI002 EQ Weir Vinyl White 03WEI003 EQ Weir Vinyl Black 03WEI004

29

COMPLETE WEIR

1Weir flap with built in buoyancy – to increase surface tension, improving the skimming action

2 Deck lids and collars come in a variety of colours to match pool surrounds

3A 52mm weir collar extension can be purchased separately to extend the deck collar (S03COL002). Multiple collar extensions can be used, as required

4 Ramp lock vacuum lid with cuff to fit most automatic cleaner hoses

5 Weighted basket with rope handle



E-Que Weir COMPLETE

1

2

3

4

5


GENERAL INFO

CROSS SECTION

EXPLODED VIEW

DIMENSIONS

DETAILED INFO

30

Dimensional Drawing

E-Que Weir COMPLETE

188

mm

250mm

210mm

148

mm

76.5mm

56m

m

405mm

420

mm

475m

m

527m

m w

ith E

xte

nsio

n C

olla

r

2" B

SP

221mm

52mm

EXTENSION COLLAR

SIDE VIEW

TOP VIEW

FRONT VIEW

188

mm

250mm

210mm

148

mm

76.5mm

56m

m

405mm 4

20m

m

475m

m

527m

m w

ith E

xte

nsio

n C

olla

r

2" B

SP

221mm

52mm

EXTENSION COLLAR

SIDE VIEW

TOP VIEW

FRONT VIEW

188

mm

250mm

210mm

148

mm

76.5mm

56m

m

405mm

420

mm

475m

m

527m

m w

ith E

xte

nsio

n C

olla

r

2" B

SP

221mm

52mm

EXTENSION COLLAR

SIDE VIEW

TOP VIEW

FRONT VIEW 1

88m

m

250mm

210mm

148

mm

76.5mm

56m

m

405mm 4

20m

m

475m

m

527m

m w

ith E

xte

nsio

n C

olla

r

2" B

SP

221mm

52mm

EXTENSION COLLAR

SIDE VIEW

TOP VIEW

FRONT VIEW

188

mm

250mm

210mm

148

mm

76.5mm

56m

m

405mm

420

mm

475m

m

527m

m w

ith E

xte

nsio

n C

olla

r

2" B

SP

221mm

52mm

EXTENSION COLLAR

SIDE VIEW

TOP VIEW

FRONT VIEW

188

mm

250mm

210mm

148

mm

76.5mm

56m

m

405mm

420

mm

475m

m

527m

m w

ith E

xte

nsio

n C

olla

r

2" B

SP

221mm

52mm

EXTENSION COLLAR

SIDE VIEW

TOP VIEW

FRONT VIEW


188

mm

250mm

210mm

148

mm

76.5mm

56m

m

405mm

420

mm

475m

m

527m

m w

ith E

xte

nsio

n C

olla

r

2" B

SP

221mm

52mm

EXTENSION COLLAR

SIDE VIEW

TOP VIEW

FRONT VIEW

188mm

250mm

210mm

148mm

76.5mm

56mm

405mm

420mm

475mm 527mm with Extension Collar

2" BSP

221mm

52mm

EXTEN

SION

CO

LLAR

SIDE V

IEW

TOP V

IEW

FRON

T VIEW

GENERAL INFO

CROSS SECTION

EXPLODED VIEW

DIMENSIONS

DETAILED INFO

31

eartheco PLUS Series eartheco BAO Series eartheco MINI Series

eartheco LED Lights COMPLETE

32

1) Product Range & Specifications 2) Features& Benefits

MINI SERIESPLUS SERIES BAO SERIESeartheco LED Lights COMPLETE

LIGHTSERIES

PRODUCT ELECTRICAL ELECTRICAL SPECSSPECS

LIGHT OUTPUT POOL SIZEPOOL SIZE WATERPROOF RATING

LIGHT & FACEPLATE LIGHT & FACEPLATE COLOUR OPTIONSCOLOUR OPTIONS

PLUS Series

160 PLUS 4W @ 12V AC 1200 E1200 E--LumensLumens < 7 meters

IP68IP68

Available in Blue / White LED& Black / White Faceplate

500 PLUS 9W @ 12V AC 2600 E2600 E--LumensLumens < 12 metersAvailable in Blue / White LED& Black / White Faceplate

1500 PLUS Colour 9W @ 12V AC 2600 E2600 E--LumensLumens

MaxMax < 7 metersAvailable in RGB LED (Colour)Black / White Faceplate

BAO Series

BAO 200 6W @ 12V AC 1400 E1400 E--LumensLumens < 8 meters

IP68IP68

Available in Blue / White LED & White Faceplate

BAO 600 12W @ 12V AC 4100 E4100 E--LumensLumens <15 metersAvailable in Blue / White LED & White Faceplate

MINI Series

Spa Light (Aimflow)

4W @ 12V AC 1200 E1200 E--LumensLumens < 4 meters

IP68IP68

Available in Blue / White LED& Black / White Housing

Spa Light (Aimflow)Colour

9W @ 12V AC 2600 E2600 E--LumensLumensMaxMax < 4 meters

Available in RGB LED (Colour)& Black / White Housing

PLUS Series

BAO Series

MINI Series

• Low Energy – eco friendly.• Long Life• High Light Output• Easy Retro Fit – fits most niche sizes.• Swivel & Tilt – for optimal lighting effects.• Includes 2m Marine-Grade Cable

– for easy installation.• Colour Models – thermal & surge protection.

• Low Energy – eco friendly.• Long Life• Ultra High Light Output• Easy Retro Fit – fits most niche sizes.• Wide Viewing Angle – “jelly pool” effect.• Includes 2m Marine-Grade Cable

– for easy installation.• Thermal & Surge Protection

• Low Energy – eco friendly.• Long Life• High Light Output – for its compact size.• Easy Retro Fit – fits most aimflow housings.• Fits into the aimflow housing.• Wide Viewing Angle – “jelly pool” effect.• Includes 2m Marine-Grade Cable

– for easy installation.• Colour Models – thermal & surge protection.

v

GENERAL INFO

DETAILED INFO

EXPLODED VIEW

ALL LIGHTS

DIMENSIONS

33



1) Power Supply eartheco recommends a 12 Volt AC 12 Volt AC isolated transformerisolated transformer that meets relevant local authority standards. Select a suitably sized transformer Select a suitably sized transformer based on the power requirements listed in the product/wattage table [below].

Transformer Sizing Calculation • Transformer output power (VA)

= (wattage of light x number of lights x 1.2) OR

• Transformer output power (VA) = (wattage of light x 1.2)

E.G. Transformer size for 3 x 500 PLUS Lights 3 x 500 PLUS Lights = (9W x 3 x 1.2) = 32.4W minimum = 32.4 VA= 32.4 VA

Refer to diagram (right) for an Refer to diagram (right) for an overview of a typical light installation.overview of a typical light installation.

2) Installation • All eartheco LED lights are

designed to be fully submersed submersed in water at all times.in water at all times.

• Any underwater electrical connections must be completely waterproof.

• We recommendWe recommend the use of a fully resin encapsulated joining system, such as the eartheco PLUS Connection Kit. PLUS Connection Kit.

3) Installation Instructions, Operating & Modes

PAGE 1/733

Light

Cable Gland

Pool Shell

Water Level

Deck Box

To Distribution

Box

Paving

Cable

Niche

20mmPVC

Conduit

eartheco LED Lights PLUS & BAO MINI SERIESPLUS SERIES BAO SERIES

SERIES/PRODUCT WATTAGE 160 PLUS 4W @ 12V AC

500 PLUS 9W @ 12V AC

1 500 PLUS Colour 9W @ 12V AC

SERIES/PRODUCT WATTAGE BAO 200 6W @ 12V AC

BAO 600 12W @ 12V AC

v

GENERAL INFO

DETAILED INFO

EXPLODED VIEW

ALL LIGHTS

DIMENSIONS

[continues onto next page]

www.ecogene.co.za

www.ecogene.co.za

34


eartheco LED Lights PLUS & BAO

PAGE 2/7

3) Retro Fit3.1 Remove the old light from the niche by carefully pryingcarefully prying the outer face plate of the light from side to side until it’s free. Take care to protect the pool shellprotect the pool shell while doing this.3.2 Most wet niche pool lights have a coil of cable behind the light to allow for the light to reach out of the pool water to make any electrical connections. Ensure there is enough cable above the water line & cut it to join to the new light cable. Strip back a piece of the supply cable to inspect the copper strands. We recommend to test for 12 volts ACWe recommend to test for 12 volts AC on the supply cable before proceeding.3.3 If the copper strands on the supply cable look corroded, it is possible that water has entered into the cable. This can cause the cable to have high resistance resulting in a voltage drop which will affect the performance affect the performance of the new lightof the new light. If necessary, replace the cable from light niche to the deck box. Connect the new light’s cable to the old light’s cable by drawing the new light’s cable through the gland at the light niche in the pool & up into the deck box. Ensure the gland in the light niche Ensure the gland in the light niche is sealed to the new cable.is sealed to the new cable. Remove old cable & make the electrical connections of the new light in the deck box.

3.4 If the copper strands on the supply cable are in good order – join the new light cable to the supply cable with a water proof connection system. We recommend the eartheco PLUS PLUS Connection Kit Connection Kit for this. RememberRemember to test the light before sealing or adding resin to the connections.3.5 Coil the extra cable & press the light into the niche.

4) Complete4.1 Open the deck box cover & loosen the gland in the rear portion of the light niche.4.2 Feed a cable draw wire/fishline through the conduit to light niche & through the gland.4.3 Attach the end of the light cable to the draw wire securely & draw the light cable carefully back through the gland & up into the deck box.4.4 At this point the light should still be on the paving & out of the water while you make the electrical connections in the deck box. This ensures that the light can reach out of the pool & is serviceable.4.5 When fitting the light to the niche, coil the excess cable into the back of the niche & press fit the light into place by gently rocking it side to side until the light faceplate sits flush to the wall of the pool.

MINI SERIESPLUS SERIES BAO SERIES

3) Installation Instructions, Operating & Modes [continued]


34

v

GENERAL INFO

DETAILED INFO

EXPLODED VIEW

ALL LIGHTS

DIMENSIONS


www.ecogene.co.za

www.ecogene.co.za

35


Detailed Information 5) PLUS Series Colour Lights

• Important!! Important!! When ready to fit the light back into the niche take notetake note of the rear portion of the light: notice the markings “M” “M” & “S” “S” – Memory & Synchronise symbols.

• When installing a single light: When installing a single light: orientate the “M” “M” symbol to point up. This activates the light’s memory function & the light will always stay in the last mode used when switched back on.

• When multiple lights are installed & synchronisation is When multiple lights are installed & synchronisation is required: required: orientate the “S” “S” symbol to point up. This activates the synchronise function to ensure all the lights in the system stay in the same mode. When the lights are switched off for more than 3 seconds & turned back on the lights will always start in mode 1 by default.

• After synchronisation, to activate the memory function After synchronisation, to activate the memory function, switch off all the lights with the “M” “M” symbol pointing up. Now all the lights will be synchronised & in memory mode.

• eartheco MINI seriesMINI series colour lightscolour lights are compatible with eartheco 1500 1500 PLUSPLUS series colour lights series colour lights & can be can be synchronised togethersynchronised together.

6) Mode Changing for Colour Lights• The eartheco PLUSPLUS Series Series & MINI SeriesMINI Series colour lights colour lights

have 9 modes of operation & 7 colours.9 modes of operation & 7 colours.• To prompt a mode change, a short interruption

in the power is required. • Simply blip the power switch to the light off & on

within 2 seconds to change between modes.

35

eartheco LED Lights PLUS

6.1 Colour Lights Mode Description (supplied with coloured lights)

MODE DESCRIPTION 1 SMOOTH COLOUR

Slowly transitions between all colours.

2 COLOUR LOCK Locks on the currently displayed colour in mode 1.

3 PROMPT COLOUR Snap changes between colours.

4 BREATH MODE Light “breathes” while changing between colours

5 SMOOTH BLUE GREEN Slowly transitions between blue & green only.

6 ENHANCED BLUE Powerful single colour.

7 WHITE Powerful single colour.

8 STROBE SMOOTH COLOURTransitions between all colours while strobing.

9 DEMO Smooth colour, prompt colour & breath mode at 4 x speed.



PAGE 3/7

v

GENERAL INFO

DETAILED INFO

EXPLODED VIEW

ALL LIGHTS

DIMENSIONS


www.ecogene.co.za

www.ecogene.co.za

36


Detailed Information 1) Power Supply

eartheco recommends a 12 Volt AC 12 Volt AC isolated transformerisolated transformer that meets relevant local authority standards. Select a suitably sized transformer Select a suitably sized transformer based on the power requirements listed in the product/wattage table [below].

Refer to diagram (right) for an Refer to diagram (right) for an overview of a typical light installation. overview of a typical light installation.

2) Installation • All eartheco LED lights are designed to

be fully submersed in water at all times.submersed in water at all times. • Any underwater electrical connections

must be completely waterproof. • We recommendWe recommend the use of a fully resin

encapsulated joining system, such as the eartheco PLUSPLUS Connection Kit. Connection Kit.

3) Retro Fit3.1 Remove the old light from the aimflow housing by unscrewing the aimflow face nut.3.2 Most wet niche pool lights have a coil of cable behind the light to allow for the light to reach out of the pool water to make any electrical connections. Ensure there is enough Ensure there is enough cable above the water linecable above the water line & cut it to join to the new light cable. Strip back a piece of the supply cable to inspect the copper strands. It is recommendedIt is recommended to test for 12 Volts AC12 Volts AC on the supply cable before proceeding.

36

Light

Pool Shell

Water Level

Deck Box

To Distribution

Box

Paving

20mm PVC Conduit

20mm to 50mm Reducer

Aimflow housing

50mmPVC

Conduit

eartheco LED Lights MINI


Cable

SERIES/PRODUCT WATTAGE MINI White/Blue 4W @ 12V AC

MINI Colour (max) 9W @ 12V AC


PAGE 4/7

v

GENERAL INFO

DETAILED INFO

EXPLODED VIEW

ALL LIGHTS

DIMENSIONS

3) Installation Instructions, Operating & Modes

www.ecogene.co.za

www.ecogene.co.za

37



37

3.3 If the copper strands on the supply cable look corroded, it is possible that water has entered into the cable. This can cause the cable to have high resistance resulting in a voltage drop which will affect the performance affect the performance of the new lightof the new light. If necessary, replace the cable from light niche to the deck box. Connect the new light’s cable to the old cable by drawing the new light’s cable through the aimflow housing in the pool & up into the deck box. Remove old cable & make the electrical connections of the new light in the deck box. 3.4 If the copper strands on the supply cable are in good order, join the new light cable to the supply cable with a water proof connection system. We recommend the eartheco PLUSPLUS Connection Kit Connection Kit for this. RememberRemember to test the light before sealing or adding resin to the joining housing. 3.5 Coil the extra cable & press the light into the aimflow housing & screw in the face nut to secure the light.

4) CompleteWet niche installation (recommended):

4.1.1 Ensure that there is enough 50mm PVC pipe behind the aimflow housing to accommodate the extra coil of cable. The cable should be long enough to allow the light to extend above the pool water line.4.1.2 To negate water loss from the aimflow housing, ensure that the piping extends above the water line where the cable exits. It is common practice to use 50mm PVC pipe up to the deck box then a 50 - 20mm reducing bush to adapt the piping to the deck box.4.1.3 Coil the extra cable & press the light into the aimflow housing & screw in the face nut to secure the light.

DryDry niche installation ( niche installation (not recommendednot recommended):):

4.2.1 Insert the o-ring between the flange & the light (refer to the exploded view), to negate water loss from the aimflow housing.4.2.2 If the light needs to be replaced in future, remember to drain the water below the light level to replace the light.

eartheco LED Lights MINI MINI SERIESPLUS SERIES BAO SERIES

PAGE 5/7

v

GENERAL INFO

DETAILED INFO

EXPLODED VIEW

ALL LIGHTS

DIMENSIONS



www.ecogene.co.za

www.ecogene.co.za

38


Detailed Information 5) MINI Series Colour Lights

Important!! Important!! When ready to fit the light back into the housing take notetake note of the front face/lens portion of the light. You will notice an arrow symbolarrow symbol inside on the PCB. • When installing a single light: When installing a single light: orientate the arrrowarrrow symbolsymbol to

point up. This activates the light’s memory function & the light will always stay in the last mode used when switched back on.

• When multiple lights are installed & synchronisation is When multiple lights are installed & synchronisation is required: required: orientate the the arrow symbol arrow symbol to point down. This activates the synchronise function to ensure all the lights in the system stay in the same mode. When the lights are switched off for more than 3 seconds & turned back on the lights will always start in mode 1 by default.

• After synchronisation, to activate the memory function After synchronisation, to activate the memory function, switch off the power to all the lights & rotate the lights so that the arrow symbol arrow symbol points up.

• eartheco MINI seriesMINI series colour lights colour lights are compatible with eartheco 1500 1500 PLUSPLUS series colour lights series colour lights & can be can be synchronised togethersynchronised together.

6) Mode Changing for Colour Lights• The eartheco PLUSPLUS Series Series & MINI SeriesMINI Series colour lights colour lights

have 9 modes of operation & 7 colours9 modes of operation & 7 colours.• To prompt a mode change, a short interruption

in the power is required. • Simply blip the power switch to the light off & on

within 2 seconds to change between modes.

38

eartheco LED Lights MINI MINI SERIESPLUS SERIES BAO SERIES

6.1 Colour Lights Mode Description (supplied with coloured lights)

MODE DESCRIPTION 1 SMOOTH COLOUR

Slowly transitions between all colours.

2 COLOUR LOCK Locks on the currently displayed colour in mode 1.

3 PROMPT COLOUR Snap changes between colours.

4 BREATH MODE Light “breathes” while changing between colours.

5 SMOOTH BLUE GREEN Slowly transitions between blue & green only.

6 ENHANCED BLUE Powerful single colour.

7 WHITE Powerful single colour.

8 STROBE SMOOTH COLOURTransitions between all colours while strobing.

9 DEMO Smooth colour, prompt colour & breath mode at 4 x speed.

PAGE 6/7

v

GENERAL INFO

DETAILED INFO

EXPLODED VIEW

ALL LIGHTS

DIMENSIONS



www.ecogene.co.za

www.ecogene.co.za

39



4.1 Included in the Warranty • All of our care & technical expertise have

gone into the manufacturing of this product. It has been fully factory tested & strict quality standards have been applied at every stage of its production.

• For this reason we offer an extended warranty from the date of purchase which is subject to the product being used under normal operating conditions.

• This device is warranted for any manufacturing defects / faulty components when it has been used in a normal underwater installation.

4.2 Not Included in the Warranty• Equipment & labour provided by a

third party at the time of the installation of the product.

• Damage caused by an installation that does not comply with local authority standards.

• Damage caused by: accident, harsh treatment, negligence, nonauthorised repairs, fire, lighting, frost, armed conflict or any other force of nature.

4.3 Warranty Periods• PLUSPLUS Series Series: 2-year warranty• BAOBAO Series Series: 3-year warranty• MINIMINI Series Series: 2-year warranty

PAGE 7/739

eartheco LED Lights PLUS, BAO & MINI MINI SERIESPLUS SERIES BAO SERIES

4) Warranty

v

GENERAL INFO

DETAILED INFO

EXPLODED VIEW

ALL LIGHTS

DIMENSIONS

Please Note: All the warranties will be deemed null & void : All the warranties will be deemed null & void if a voltage higher than 12 volts is applied to this product or it is misused or abused in any way.

www.ecogene.co.za

www.ecogene.co.za

40

PLUS SERIES COMPLETE PART NUMBER

PLUS 160 LED Blue – Gunite W/F 04LIT840PLUS 160 LED White – Gunite W/F 04LIT841PLUS 160 LED Blue – Gunite B/F 04LIT842PLUS 160 LED White – Gunite B/F 04LIT843PLUS 160 LED Blue – Vinyl W/F 04LIT844PLUS 160 LED White – Vinyl W/F 04LIT845PLUS 160 LED Blue – Vinyl B/F 04LIT846PLUS 160 LED White – Vinyl B/F 04LIT847PLUS 160 LED White – Gunite + Blue Lens W/F 04LIT848PLUS 160 LED White – Vinyl + Blue Lens W/F 04LIT849PLUS 160 LED Blue – W/F S/Steel Spring 04LIT408PLUS 160 LED Blue – Vinyl W/F S/Steel Spring 04LIT448PLUS 160 LED Blue – Vinyl S/S Spring B/F 04LIT468PLUS 160 LED White – Vinyl S/S Spring B/F 04LIT478PLUS 500 LED Blue – Gunite W/F 04LIT860PLUS 500 LED White – Gunite W/F 04LIT861PLUS 500 LED Blue – Gunite B/F 04LIT862PLUS 500 LED White – Gunite B/F 04LIT863PLUS 500 LED Blue – Vinyl W/F 04LIT864PLUS 500 LED White – Vinyl W/F 04LIT865PLUS 500 LED Blue – Vinyl B/F 04LIT866PLUS 500 LED White – Vinyl B/F 04LIT867PLUS 500 LED White – Gunite + Blue Lens W/F 04LIT868PLUS 500 LED White – Vinyl + Blue Lens W/F 04LIT869PLUS 500 LED Blue – W/F S/S Spring 04LIT608PLUS 500 LED White – W/F S/S Spring 04LIT618PLUS 500 LED White – B/F S/S Spring 04LIT638PLUS 500 LED Blue – W/F S/S Spring 04LIT648PLUS LED RGB – Colour Gunite W/F 04LIT890PLUS LED RGB – Colour Gunite B/F 04LIT891PLUS LED RGB – Colour Vinyl W/F 04LIT892PLUS LED RGB – Colour Vinyl B/F 04LIT893PLUS LED RGB 1500+ – Colour W/F S/Steel Spring 04LIT908PLUS LED RGB 1500+ – Colour Gunite

B/F S/Steel Spring04LIT918

Remote – 1 CH EQ Colour Light Remote 04REM001Remote – 3 CH EQ Colour Light Remote 04REM003

PLUS SERIES Exploded View: Parts & Part Numbers



1

PLUS 160 LED Blue Retro Fit W/F S04LIT840PLUS 160 LED White Retro Fit W/F S04LIT841PLUS 160 LED Blue Retro Fit B/F S04LIT842PLUS 160 LED White Retro Fit B/F S04LIT843PLUS 160 LED White Retro Fit + Blue Lense S04LIT848PLUS 500 LED Blue Retro Fit W/F S04LIT860PLUS 500 LED White Retro Fit W/F S04LIT861PLUS 500 LED Blue Retro Fit B/F S04LIT862PLUS 500 LED White Retro Fit B/F S04LIT863PLUS 500 LED White Retro Fit + Blue Lense S04LIT868PLUS LED RGB Colour Retro Fit W/F S04LIT890PLUS LED RGB Colour Retro Fit B/F S04LIT891


2SL Lense Screws M6 x 16 S/S C/S Slot x 8 Screws

S04BWN201

3 EQ Light Liner Face Plate S04LIT0084 EQ Terminal Cap Complete S04LIT0045 EQ Gland Nut S04LIT007

6.1 EQ Vinyl Gasket (Large) S04SEA0216.2 EQ Vinyl Gasket (Small) S04SEA0207 Light Grommet Washer S04LGW0018 EQ Grommet/Seal Ring S04SEA0089 EQ Light Body Only S04LIT002

MINI SERIESBAO SERIESPLUS SERIES

v

GENERAL INFO

DETAILED INFO

EXPLODED VIEW

ALL LIGHTS

DIMENSIONS

41

BAO SERIES COMPLETE PART NUMBER

BAO 200 LED Blue – Gunite W/F 04LIT809BAO 200 LED White – Gunite W/F 04LIT810BAO 200 LED Blue – Gunite B/F 04LIT811BAO 200 LED White – Gunite B/F 04LIT812BAO 200 LED Blue – Vinyl W/F 04LIT813BAO 200 LED White – Vinyl W/F 04LIT814BAO 200 LED Blue – Vinyl B/F 04LIT815BAO 200 LED White – Vinyl B/F 04LIT816BAO 600 LED Blue – Gunite W/F 04LIT801BAO 600 LED White – Gunite W/F 04LIT802BAO 600 LED Blue – Gunite B/F 04LIT803BAO 600 LED White – Gunite B/F 04LIT804BAO 600 LED Blue – Vinyl W/F 04LIT805BAO 600 LED White – Vinyl W/F 04LIT806BAO 600 LED Blue – Vinyl B/F 04LIT807BAO 600 LED White – Vinyl B/F 04LIT808


1

BAO 200 Blue LED P/Light Retro Fit W/F S04LIT800BAO 200 White LED P/Light Retro Fit W/F S04LIT805BAO 200 Blue LED P/Light Retro Fit B/F S04LIT806BAO 200 White LED P/Light Retro Fit B/F S04LIT807BAO 600 Blue LED P/Light Retro Fit W/F S04LIT801BAO 600 White LED P/Light Retro Fit W/F S04LIT802BAO 600 Blue LED P/Light Retro Fit B/F S04LIT803BAO 600 White LED P/Light Retro Fit B/F S04LIT804

2SL Lense Screws M6 x 16 S/S C/S Slot. x 8 Screws

S04BWN201

3 EQ Light Liner Face Plate S04LIT0084 EQ Gland Nut S04LIT007

5.1 EQ Vinyl Gasket (Large) S04SEA0215.2 EQ Vinyl Gasket (Small) S04SEA0206 Light Grommet Washer S04LGW0017 EQ Grommet/Seal Ring S04SEA0088 EQ Light Body Only S04LIT002

BAO SERIES Exploded View: Parts & Part Numbers

eartheco LED Lights BAO MINI SERIESBAO SERIESPLUS SERIES

v

GENERAL INFO

DETAILED INFO

EXPLODED VIEW

ALL LIGHTS

DIMENSIONS

42

MINI SERIES Exploded View: Parts & Part Numbers


5

4

2

3

1

MINI SERIES COMPLETE PART NUMBER

PLUS Spa Light LED Blue (Aimflow – White) 06LIT001PLUS Spa Light LED Blue (Aimflow – Black) 06LIT002PLUS Spa Light LED White (Aimflow – White) 06LIT004PLUS Spa Light LED White (Aimflow – Black) 06LIT005PLUS Spa Light LED Colour (Aimflow – White) 06LIT006PLUS Spa Light LED Colour (Aimflow – Black) 06LIT007


1 Aimflow - Nut White S05AIM005Aimflow - Nut Black S05AIM006

2PLUS Spa Light LED Blue – Retro Fit S04LIT850PLUS Spa Light LED White – Retro Fit S04LIT851PLUS Spa Light LED Colour – Retro Fit S04LIT852

3 O-Ring Plus Spa Light Vinyl 2mm x 38mm S06SEA005

4 Aimflow Flange – White S05AIM001Aimflow Flange – Black S05AIM002

5 Aimflow – Body Only 50mm Glued – White S05AIM007Aimflow – Body Only 50mm Glued – Black S05AIM008


v

GENERAL INFO

DETAILED INFO

EXPLODED VIEW

ALL LIGHTS

DIMENSIONS

43

PLUS SERIES Dimensional Drawing

v

GENERAL INFO

DETAILED INFO

EXPLODED VIEW

ALL LIGHTS

DIMENSIONS


96mm

170

mm

40mm 252mm


44

BAO SERIES Dimensional Drawing

eartheco LED Lights BAO

256mm 20mm 60mm

170m

m


v

GENERAL INFO

DETAILED INFO

EXPLODED VIEW

ALL LIGHTS

DIMENSIONS

45

MINI SERIES Dimensional Drawing


42mm

40m

m

14.6mm 2.4mm

30.

5mm

65.5mm


v

GENERAL INFO

DETAILED INFO

EXPLODED VIEW

ALL LIGHTS

DIMENSIONS

PROVIDING EXCEPTIONAL EQUIPMENT TO THE SWIMMING POOL TRADE SINCE 2002.eartheco – contact us

Address Lanseria Corporate Estate (off Malibongwe Drive R512 – aka Pelindaba Rd)

Cnr Electron Lane & Falcon Lane (within Lanseria Corporate Estate)

Telephone 011 300 9917/8/9

Sales [email protected]

Administration [email protected]

Support [email protected]

Website www.eartheco.co.za

pool product catalogue

Documents

Transcript of pool product catalogue