8/2/2019 Polysulphide Sealant

1/2

POURING GRADEDESCRIPTION:

Kankol 625P is a two-part elastomeric sealant

based on a liquid polysulphide polymer which when

mixed with accelerator (curing agent) cures by

chemical reaction to form a tough, flexible rubber

seal. This sealant has excellent Fuel resistance,

adhesion to different substrates like masonry, con-

crete with excellent movement accommodation.

Standards compliance

British Standard BS: 5212:1990-Type FB (Flameand Fuel Resistance) Cold applied Joint Sealant

systems for Concrete pavements.

Ministry of Road Transport and Highway (MORTH)

specification for Roads and Bridge Works Clause

602.2.8 and clause 602.II.4 State that cold applied

two part polysulphide sealant shall meet

BS: 5212:1990.IRMRA certification

KANKOL625p

Phone: 8956117811Fax: (020) 25513367,E-mail: ashok@kangarupolymers.com

Gat no.72 vill. Dhanore, Markal RD,Alandi Tal. Khed , Pune,Maharastra, India

KANGARU POLYMERS PVT.

TWO- PART POLYSULPHIDE SEALANT

Areas of Application

For sealing and maintenance of horizontal joints in

Aircraft fuelling areas

Oil terminals

Garage forecourts

Concrete Roads

Parking and cargo areas

Warehouses industrial Floors

Features & Benefits

Cold applied

Pourability & self-leveling

UV resistant

Flame and fuelsresistance

Good weatherability

Movement Accommoda-

tion:Butt joints (movement in ten-

sion and compression): 30

%.

Lap Joints (movement in

shear): 50 %

Application InstructionsJoint preparationThe joint surfaces must be clean, dry and free from all con-

tamination. The surfaces should be degreased using the ap-

propriate Cleaner. Primers may be required on some sub-

strates.

Insertion of Backup MaterialsA sui table mater ial is closed cel l, medium densi ty,cross linked Polyethylene foam, strip or rod. Ensure

constant and correct depth of joint.

Masking Tape ApplicationMasking Tape should be used on both sides of the joint to

improve the neatness of the finished seal.

PrimingApply thin film of kankol porous primer on both sides of the

joint with a brush. Allow flash-off of solvent before application

of Sealant i.e. surface should be touch-dry.

MixingThe base and curing agent ratio controls the adhesion,

strength and durability of Kankol 625G.The base and curing agent must therefore be thoroughly

mixed.

ToolingDepth Gauge may be used to recess sealant as specified in

the drawing.

Cleaning

After sealing the joint the tools and equipments should be

cleaned immediately with kerosene or any other cleaning

solvents/thinners.

Health and safety

Avoid prolonged contact with skin. If sealant comes into con-tact with the eyes, flush with cold water and obtain medical

attention.

Storage Life:12 months in original unopened packaging stored in a cool,

dry place out of direct sunlight

Technical SupportKANGARU provides technical advisory service supported by

teams of specialists in the field.

8/2/2019 Polysulphide Sealant

2/2

Use this space to

provide more de-

tailed information

about your products

or services. You can

also include a

graphic of a product

or service.

Lorem ipsum dolor

sit amet, consec-

tetuer adipiscing elit,

sed diem nonummy nibh euismod tin-

cidunt ut lacreet dolore magna aliguam

erat volutpat. Ut wisis enim ad m inim

veniam, quis nostrud exerci tution ul-

lamcorper suscipit lobortis nisl ut aliquip

ex ea commodo consequat. Duis te

feugifacilisi. Duis autem dolor in hendre-

rit in vulputate velit esse molestie con-

sequat, vel illum dolore eu feugiat nulla

facilisis at vero eros et accumsan et

iusto odio dignissim qui blandit praesent

luptatum.

List your product or service here

Include description if necessary.

$0.00

List your product or service here

Include description if necessary.

$0.00

List your product or service here

Include description if necessary.

$0.00

List your product or service here

Include description if necessary.$0.00

List your product or service here

Include description if necessary.

$0.00

List your product or service here

Include description if necessary.

$0.00

List your product or service here

Include description if necessary.

$0.00

List your product or service here

Include description if necessary.$0.00

List your product or service here

Include description if necessary.

$0.00

List your product or service here

Include description if necessary.

$0.00

List your product or service here

Include description if necessary.

$0.00

List your product or service here

Include description if necessary.

$0.00

Price ListMain InsideHeading

Caption describingpicture or graphic.

Gat no.72 vill. Dhanore, Markal RD,Alandi Tal. Khed , Pune,Maharastra, India

Phone: 8956117811

Fax: (020) 25513367,E-mail: ashok@kangarupolymers.com

KANGARUPOLYMERS PVT. LTD.