polypropylene - IPS Flow · PDF file253 about: polypropylene Pressure ratings for...

polypropylene

IPS Flow SystemsSeaham Grange Industrial Estate, Seaham, Co Durham, SR7 0PT, England

Tel: +44+ 191 521 3111 Fax: +44+ 191 521 3222E-mail: [email protected] Website: www.ipsflowsystems.com

Temperature range 0˚C to 90˚C (Short Term 110˚C)High impact strengthAbrasion resistantSuitable for handling foodstuffsIdeal for above and below ground useThreading possibleResistant to acids, alkalis, salts and manyorganic solventsGood insulatorLightweight (density 0.905-0.92)

Welding equiment requiredNot resistant to concentrated oxidising acidsThermal expansion is higher than other plastics

Polypropylene (PP) piping systems are widely used inindustrial processing. Light in weight yet with high impactstrength and reliable heat fusion welding, PP also offersgood abrasion resistance and is a good thermal andelectrical insulator.

PP is suitable for working use at temperatures up to 90˚C,and will withstand short term use at a maximum 110˚C.

Chemical resistance is excellent: PP is resistant toaqueous solutions of acids, alkalis and salts, and to alarge number of organic solvents.

PP systems are assembled using heat fusion welding,either using socket fittings or butt fusion of pipes and/orfittings end to end. Welding equipment is available for saleor hire and is featured in Section 13.

Pipe-H Homopolymer - mm Size 256

Pipe - Copolymer - mm Size 257

Socket Fusion Fittings - mm Size 258

Socket Fusion Adaptor Fittings - mm Size 258

Socket Fusion Flanges - mm Size 259

Fusion Spigot Fittings - mm Size 260

Fusion Spigot Adaptor Fittings - mm Size 266

Fusion Spigot Flanges - mm Size 267

Flame Retardent Pipe and Fittings 270

Flame Retardent Electrically Conductive Pipe and Fittings 272

Basket Strainer 274

Bag Filter 275

Ball Valve, Double Union 276

Diaphragm Valve 279

Needle Valve 279

T and L-Port Ball Valve 280

Butterfly Valve 282

Non-Return Valve, Wafer Check 286

Air Release Valve 288

Foot Valve 288

Non-Return Valve, Check 289

Gauge Guard 291

Line Strainer 291

Ball Valve, Electrically Actuated 292

Ball Valve, Pneumatically Actuated 293

Butterfly Valve, Electrically Actuated 294

Butterfly Valve, Pneumatically Actuated 294

Diaphragm Valve, Actuated 295

Pressure Reducing Valve 296

Pressure Relief Valve 300

Pipe : BS 5556: 1978, DIN 8077/8078Fittings : DIN 16962Threaded fittings : BS21/DIN 2199/ISO 727

application guide

standards and approvals

section guide

252

about: polypropylene

General properties of polypropylene

Polypropylene exhibits thermal stability up to 100°C (short-term 120°C for drainage systems). Polypropylene also showsgood impact strength, improving further along withincreasing temperature.

Polypropylene is physiologically non-toxic (in accordancewith ONORM B5014, Part 1, FDA, BGA, and KTW guidelines)making it ideally suited for a piping material in contact withpotable water.

Some important advantages of polypropylene are:

- Low specific weight of 0.91g/cm3

- High long term creep resistance- Excellent chemical resistance- High resistance to thermal ageing- Outstanding welding characteristics- Excellent abrasion resistance- Smooth internal surfaces

Characteristics

Chemical resistance

The chemical resistance of polypropylene is consideredexcellent. It is resistant to dilute (aqueous) solutions of salts,acids and alkalis and to a large number of organic solvents.Polypropylene is resistant to concentrated hydrochloric acid andhydrofluoric acid, however above certain concentration levelsdiffusion can occur. This does not damage the material itself butit can cause secondary damage to surrounding steelconstructions. In this type of application, double containmentpiping systems have been found ideally suited.

Note: PP-R and Copper:Direct contact between PP-R and copper, especially at highertemperatures, can lead to deterioration of the physicalproperties of PP-R. Heat ageing is faster due to the acceleratedthermal oxidisation.

Weathering resistance

Piping systems in beige grey polypropylene are not UVstabilised, and therefore they should be suitably protectedagainst degradation when used outdoors - especially wherethere are high UV levels. Protection against direct solar radiationcan be achieved by the application of a UV absorbent coatingsuch as AGRU Coat, or by adding a layer of insulation. It is alsopossible to compensate for the surface damage that may ariseby increasing the wall thickness of the piping system. In suchcases, the additional wall thickness should be not less than2mm. As polypropylene does not contain light stable colourpigments, it may experience a change of colour (fading) becauseof long-term weathering.

Electrical characteristics

Polypropylene is non-conductive, therefore systems will remainfree from electrolytic corrosion. Precautions should be taken toavoid static discharge should any part of a Polypropylene pipingsystem pass through an area where explosive gases may bepresent.

Physiological characteristics

Polypropylene piping systems from IPS are physiologically non-toxic (in accordance with ONORM B5014, Part 1, FDA, BGA,and KTW guidelines) making them ideally suited as a pipingmaterial in contact with potable water.

Polypropylene (PP) is a thermoplastic from the polyolefin group of materials. Ithas low density compared to other thermoplastics, and a unique combinationof properties including mechanical strength, chemical resistance and thermalstability.

There are two different types of polypropylene that are in common use aspiping materials:

PP-H (Homopolymer)PP-R (Random copolymer)

The pipes, sheets and semi-finished products supplied by IPS aremanufactured from nucleoid PP-H 100 (Beta ß -PP), whilst fittings areproduced from PP-R (polypropylene random copolymer).

Polypropylene generally exhibits a good resistance against a variety ofchemicals, such as salts, acids, and alkalis. Good chemical resistance is alsoachieved against contact with solvents, such as alcohols, esters and ketones.Consequently, solvent cement welding of polypropylene pipes and fittings isnot possible.

There are a number of welding techniques suitable for pressure piping applications. High quality, reliable joints can be achieved usingsocket fusion jointing, butt fusion welding, non-contact Infra-Red (IR) butt welding, and electrofusion welding. In addition,polypropylene systems can be joined using flanges, threaded connections and mechanical couplings.

Polypropylene piping systems are available from IPS in metric dimensions according to DIN 8077/8078 and DIN 16962.

Properties of Polypropylene (Average values)

Property PP-H PP-R

Density 0.91g/cm3 0.91g/cm3

Tensile Strength 30 MPa 25 MPa

Elongation at Break >300% >300%

Notched Impact Strength at 23°C 50 kJ/ m2 25 kJ/ m2

Notched Impact Strength at -30°C 5 kJ/ m2 2 kJ/ m2

Modulus of Elasticity 1300MPa 900 MPa

Coefficient of Linear Expansion 0.16mm/m°C 0.16mm/m°C

Maximum Operating Temperature 90°C 90°C

Minimum Operating Temperature -10°C -10°C

Crystalline Melting Temperature 160-165°C 150-154°C

Melt Flow Index 0.50 g/10min 0.50g/10min

Surface Resistance >1013 Ω >1013 Ω

Thermal Conductivity 0.22 W/m · K 0.24 W/m · K

Flammability HB UL94 HB UL94

Colour - Beige Grey 7032 RAL 7032 RAL

IPS Flow Systems l Seaham Grange Industrial Estate l Seaham l SR7 0PT l England l Tel: 0191 521 3111 l www.ipsflowsystems.com

253

about: polypropylenePressure ratings for polypropylene systems

Maximum continuous pressure ratings

Pipes, fittings and valves are designed to operate continuously for 50 years at their maximum rated pressure at 20°C as follows,unless otherwise stated.

The pressure ratings for Polypropylene pipes according to DIN 8077 & DIN 8078 and Polypropylene fittings according to DIN 16962are defined by the ‘nominal pressure’ method, whereby pipes, fittings and valves are grouped together according to a single nominalpressure rating. The PN rating is the maximum permitted operational pressure in bars calculated at 20°C, for example PN6 indicatesa maximum working pressure of 6 bars. According to this method the pressure ratings of Polypropylene pipes and fittings accordingto the nominal pressure system is as follows:-

Jointing Polypropylene SystemsPP pipe to pipe and pipe to fitting joints are easy to make, using socket fusion, butt fusion or electrofusion welds.

Welding equipment is available for sale or hire - see Tools and Installation Equipment.Detailed installation instructions, as well as free training, is available on request.

Pipe Fitting

HeatingSocket

HeatingSpigot

HeatingElement

HeatingElement

HeatingElement

Electro-fusionSocket

Pipe

Fitting

Pipe

Fitting

Pipe Pipe

Individual Parts

Heating

Finished Joint

Individual Parts

Heating

Finished Joint

Individual Parts

Heating

Finished Joint

Individual Parts

Heating

Finished Joint

Socket Fusion Butt Fusion Infra-Red (IR) Fusion Electro-Fusion

Size Range Max. Operating Pressure

Fittings

Socket Fusion PN10 20mm to 110mm 10 Bar

Spigot Fusion PN10 20mm to 500mm 10 Bar

PN6 50mm to 1000mm 6 Bar

PN3.2 110mm to 1000mm 3.2 Bar

Threaded PN10 1/4” to 4” 10 Bar

Size Range Max. Operating Pressure

Pipe PN16 10mm to 225mm 16 Bar




PN3.2 50mm to 1200mm 3.2 Bar

PN2.5 63mm to 1400mm 2.5 Bar

Standard Dimensional Ratio (SDR)

Standard Dimensional Ratio (SDR) is used to define thermoplastic pipes in a variety of materials including polypropylene,polyethylene, and PVC-U. Taken from ISO 4065, SDR is described as being ‘the ratio of the nominal outside diameter of a pipe to itsnominal wall thickness’. To calculate the SDR according to ISO 4065 the following equation can be used:

SDR = de

where:SDR = Value to be calculatede = Thickness of the pipe wall (mm)d = Pipe outside diameter (mm) e

d SDR = d/e


254

polypropylene pipe availability - PP-H

Metric Sizes DIN 8077/8078

Series Ventilation S-20 S-16 S-12.5 S-8.3 S-5 S-3.2SDR - SDR41 SDR33 SDR26 SDR17.6 SDR11 SDR7.4

Size Working Pressure - PN2.5 PN3.2 PN4 PN6 PN10 PN1610 O.D. (mm) 10

Wall (mm) 1.8Weight/m (kg) 0.05

12 O.D. (mm) 12Wall (mm) 1.8Weight/m (kg) 0.06

16 O.D. (mm) 16 16Wall (mm) 1.8 2.2Weight/m (kg) 0.08 0.09

20 O.D. (mm) 20 20 20Wall (mm) 1.8 2.5 2.8Weight/m (kg) 0.10 0.14 0.15



40 O.D. (mm) 40 40 40 40Wall (mm) 1.8 2.3 3.7 5.5Weight/m (kg) 0.22 0.27 0.41 0.58

50 O.D. (mm) 50 50 50 50 50Wall (mm) 1.8 2.0 2.9 4.6 6.9Weight/m (kg) 0.27 0.30 0.42 0.64 0.90

63 O.D. (mm) 63 63 63 63 63 63Wall (mm) 1.8 2.0 2.5 3.6 5.8 8.6Weight/m (kg) 0.35 0.38 0.47 0.66 1.01 1.41


























255

polypropylene pipe availability - PP-R and special grades

Metric Sizes DIN 8077/8078 PPs: Flame RetardentPP-R PPs-el: Flame Retardent Electric Conductive Series S-5 Ventilation S-20 S-16 S-5 Ventilation S-16 S-8.3 S-5SDR SDR11 - SDR41 SDR33 SDR11 - SDR33 SDR17.6 SDR11

Size Working Pressure PN10 - PN2.5 PN3.2 PN10 - PN3.2 PN6 PN1020 O.D. (mm) 20 20

Wall (mm) 2.5 2.5Weight/m (kg) 0.14 0.14








110 O.D. (mm) 110 110 110 110 110 110 110 110Wall (mm) 10.0 2.7 3.4 10.0 3.0 3.4 6.3 10Weight/m (kg) 3.01 0.92 1.14 3.09 1.24 1.40 2.40 3.31



160 O.D. (mm) 160 160 160 160 160 160 160 160Wall (mm) 14.6 3.0 4.0 4.9 14.6 3.0 4.9 9.1Weight/m (kg) 6.38 1.53 1.97 2.38 6.55 1.82 2.90 5.10


200 O.D. (mm) 200 200 200 200 200 200 200Wall (mm) 18.2 3.0 4.9 6.2 3.0 6.2 11.4Weight/m (kg) 9.92 1.90 3.00 3.75 2.28 4.50 8.00








Pressure ratings for Polypropylene pipework systems arealways quoted at 20˚C. As working temperatureincreases, the maximum working pressure decreases bythe factor indicated.

* For continuous use at these temperatures, consult ourCustomer Services Department

Temperature De-Rating Factors

20 1.0030 1.0040 0.8250 0.6660 0.5070 0.3680 0.2590* 0.13

100* 0.05

Working PressureTemperature (˚C) De-Rating Factor

i

This data is provided for guidence only. For specificprojects please contact our technical department


256

pipe homo-polymer

metric sizesPP-H Homopolymer Pipe

40 - -50 3.0 12 705 0050 0063 3.0 12 705 0063 0075 3.0 12 705 0075 0090 3.0 12 705 0090 00

110 3.0 12 705 0110 00125 3.0 12 705 0125 00140 3.0 12 705 0140 00160 3.0 12 705 0160 00180 3.0 12 705 0180 00200 3.0 12 705 0200 00 19.06225 3.5 12 705 0225 00250 3.5 12 705 0250 00 27.70280 4.0 12 705 0280 00315 5.0 12 705 0315 00 49.30355 6.0 12 705 0355 00 59.72400 6.0 12 705 0400 00 74.92450 6.0 12 705 0450 00 99.34500 8.0 12 705 0500 00 145.51560 10.0 12 705 0560 00 203.29630 10.0 12 705 0630 00 230.10710 12.0 12 705 0710 00 309.75800 12.0 12 705 0800 00 340.39900 15.0 12 705 0900 00 518.25

1000 15.0 12 705 1000 00 576.311200 18.0 12 705 1200 00 874.141400 20.0 12 705 1400 00 1188.36

- -- -

12 705 0063 41 3.2112 705 0075 41 4.0212 705 0090 41 5.6012 705 0110 41 8.1912 705 0125 41 10.9512 705 0140 41 13.7012 705 0160 41 17.2712 705 0180 41 21.8912 705 0200 41 26.5012 705 0225 41 33.6512 705 0250 41 46.9612 705 0280 41 56.3012 705 0315 41 71.1912 705 0355 41 94.5712 705 0400 41 120.6212 705 0450 41 180.2012 705 0500 41 220.4112 705 0560 41 276.2312 705 0630 41 349.9412 705 0710 41 445.2712 705 0800 41 563.6712 705 0900 41 750.5312 705 1000 41 926.2812 705 1200 41 1407.2712 705 1400 41 2013.38

Code Price/mWall Code Price/mSize

- -12 705 0050 33 2.6712 705 0063 33 3.6912 705 0075 33 5.0112 705 0090 33 7.2712 705 0110 33 10.6412 705 0125 33 13.9312 705 0140 33 17.0412 705 0160 33 22.2212 705 0180 33 28.1412 705 0200 33 34.9212 705 0225 33 43.6412 705 0250 33 54.2612 705 0280 33 73.5112 705 0315 33 93.0312 705 0355 33 123.3612 705 0400 33 157.1512 705 0450 33 233.7812 705 0500 33 286.1512 705 0560 33 361.2112 705 0630 33 455.8112 705 0710 33 580.1112 705 0800 33 734.1412 705 0900 33 983.5212 705 1000 33 1210.2612 705 1200 33 1831.02

- -

Code Price/m

12 705 0040 26 2.0312 705 0050 26 2.7512 705 0063 26 4.3312 705 0075 26 5.8812 705 0090 26 8.5612 705 0110 26 12.4312 705 0125 26 16.0812 705 0140 26 20.1012 705 0160 26 26.3612 705 0180 26 33.0612 705 0200 26 40.9612 705 0225 26 51.4012 705 0250 26 63.6012 705 0280 26 86.0812 705 0315 26 109.6112 705 0355 26 145.5112 705 0400 26 183.9412 705 0450 26 274.0012 705 0500 26 337.3212 705 0560 26 422.9212 705 0630 26 536.8512 705 0710 26 682.0412 705 0800 26 865.2212 705 0900 26 1155.6112 705 1000 26 1422.17

- -- -

Code Price/m

Standard length 5mPlease note that a transportation surcharge may be applied on pipe diameters 250mm or larger - please enquire for details.

Ventilation PN2.5/S-20/SDR41 PN3.2/S-16/SDR33 PN4/S-12.5/SDR26

ElectrofusionCoupling

PN10

20 11 375 0020 11 11.3325 11 375 0025 11 12.8932 11 375 0032 11 13.9340 11 375 0040 11 14.6250 11 375 0050 11 22.6863 11 375 0063 11 23.7775 11 375 0075 11 33.3290 11 375 0090 11 44.58

110 11 375 0110 11 54.26125 11 375 0125 11 76.78140 11 375 0140 11 86.78160 11 375 0160 11 99.46180 11 375 0180 11 146.04200 11 375 0200 11 168.86225 11 375 0225 11 207.95250 11 375 0250 11 547.73315 11 375 0315 11 884.56

Size Code Price

Manufactured fromPP-H (Homopolymer)material

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

Flame retardent (PPs) and flame retardentelectrically conductive (PPs-el) grades of PPare featured at the end of the Polypropylenesection.

Flame Retardent PP

Don’t have the tools?We have a dedicated fleet ofwelding equipment available tohire on a weekly basis.

Machine Hire

i


257

pipe homo-polymer and co-polymer

PP-R Copolymer Pipe

PN10/S-5/SDR 11

20 11 705 0020 11 1.8025 11 705 0025 11 2.4432 11 705 0032 11 3.4440 11 705 0040 11 4.7850 11 705 0050 11 7.3563 11 705 0063 11 11.6975 11 705 0075 11 16.1890 11 705 0090 11 23.33

110 11 705 0110 11 34.81125 11 705 0125 11 44.97140 11 705 0140 11 56.24160 11 705 0160 11 73.69180 11 705 0180 11 92.98200 11 705 0200 11 114.61225 11 705 0225 11 145.55250 11 705 0250 11 179.09280 11 705 0280 11 224.12315 11 705 0315 11 284.31

Size Code Price/m

10 - -12 - -16 - -20 - -25 - -32 12 705 0032 17 2.1940 12 705 0040 17 2.5850 12 705 0050 17 4.0663 12 705 0063 17 6.3275 12 705 0075 17 8.9990 12 705 0090 17 12.43

110 12 705 0110 17 19.25125 12 705 0125 17 24.87140 12 705 0140 17 30.65160 12 705 0160 17 40.18180 12 705 0180 17 49.73200 12 705 0200 17 62.08225 12 705 0225 17 78.35250 12 705 0250 17 96.48280 12 705 0280 17 130.71315 12 705 0315 17 166.54355 12 705 0355 17 222.03400 12 705 0400 17 280.69450 12 705 0450 17 417.50500 12 705 0500 17 514.43560 12 705 0560 17 645.78630 12 705 0630 17 817.78710 12 705 0710 17 1036.70800 12 705 0800 17 1138.92

Code Price/mSize

- -- -

12 705 0016 11 0.9612 705 0020 11 1.7312 705 0025 11 2.2712 705 0032 11 3.2112 705 0040 11 3.9912 705 0050 11 6.2012 705 0063 11 9.6212 705 0075 11 13.3812 705 0090 11 19.2512 705 0110 11 26.8912 705 0125 11 37.3812 705 0140 11 46.9112 705 0160 11 61.11

- -12 705 0200 11 94.6112 705 0225 11 120.3912 705 0250 11 148.0912 705 0280 11 202.5012 705 0315 11 255.6612 705 0355 11 340.8812 705 0400 11 433.1412 705 0450 11 644.2312 705 0500 11 795.89

Code Price/m

- -12 705 0012 07 0.9712 705 0016 07 1.4012 705 0020 07 1.8112 705 0025 07 2.7412 705 0032 07 4.5412 705 0040 07 5.5712 705 0050 07 8.6012 705 0063 07 13.5112 705 0075 07 19.2512 705 0090 07 27.3712 705 0110 07 40.9712 705 0125 07 52.7012 705 0140 07 66.3012 705 0160 07 86.32

Code Price/m

PN6/S-8.3/SDR17.6 PN10/S-5/SDR11 PN16/S-3.2/SDR7.4


PP-H Homopolymer Pipe

AGRU Polypropylene pipes and fittings are manufactured in accordance with DIN 8077/8078 using the followingmaterials:

Pipes: Nucleoid PP-H 100 (Beta ß-PP)Fittings: PP-R (polypropylene random copolymer)

Nucleoid PP-H is chosen for pipes because of its exceptional impact strength at cold temperatures, good stressfracture and chemical resistance. PP-R (also optionally available as pipe) provides high long term creep strength atcontinuous high temperatures. Other types of Polypropylene are also available:

Flame RetardentPPs (Polypropylene homo-polymer, flame-retardent)Due to its higher stiffness, PPs is ideally suited for ventilation pipes. The flame-retardent properties enhance thematerial for this application. Note that this material may not be used outdoors, as it is not UV stabilised.

PPs-el (Polypropylene random copolymer flame-retardent, electro-conductive)This material combines the benefits of flame retardent properties and electro-conductivity. It can be used for safetyreasons in the transport of combustible material.

High PurityPP Pure PP-R (High purity grade Polypropylene random copolymer)Selected and fully traceable raw materials are manufactured under strictly controlled conditions. This materials isideal for less critical ultra-pure water applications (see High Purity Systems).

Polypure PP-R: Natural (Polypropylene random copolymer, natural coloured)As natural PP-R contains no colour additives, it is ideally suited for high purity water piping systems. Note that it isnot UV stabilised (see High Purity Systems).

Polypropylene Material

i


Maximum working pressures (socket fusion):All sizes PN10

Pressure Ratings

20 11 050 0020 07 3.2125 11 050 0025 07 3.8232 11 050 0032 07 4.3940 11 050 0040 07 5.6450 11 050 0050 07 7.7463 11 050 0063 07 9.9375 11 050 0075 07 21.8990 11 050 0090 07 27.37

110 11 050 0110 07 43.79

258

socket fusion fittings

metric sizesTee 90˚

Reducing Tee 90˚

Elbow 90˚

Elbow 45˚

Socket

20 11 056 0020 07 2.8925 11 056 0025 07 3.3032 11 056 0032 07 3.8240 11 056 0040 07 4.7850 11 056 0050 07 7.9863 11 056 0063 07 11.5175 11 056 0075 07 28.4790 11 056 0090 07 42.38

110 11 056 0110 07 52.70

Size Code Price

ReducerSpigot x Socket

Female AdaptorBSP or NPT threaded

25/20 11 055 2520 07 4.4532/20 11 055 3220 07 5.4732/25 11 055 3225 07 5.4740/20 11 055 4020 07 6.2040/25 11 055 4025 07 6.2040/32 11 055 4032 07 6.2050/20 11 055 5020 07 10.0050/25 11 055 5025 07 10.0050/32 11 055 5032 07 10.0050/40 11 055 5040 07 10.0063/25 11 055 6325 07 14.6263/32 11 055 6332 07 14.6263/40 11 055 6340 07 14.6263/50 11 055 6350 07 14.62

20 11 051 0020 07 2.5025 11 051 0025 07 3.0632 11 051 0032 07 3.6940 11 051 0040 07 4.6350 11 051 0050 07 8.5363 11 051 0063 07 11.1075 11 051 0075 07 23.4690 11 051 0090 07 29.56

110 11 051 0110 07 42.85

20 11 054 0020 07 2.7425 11 054 0025 07 2.8932 11 054 0032 07 3.2140 11 054 0040 07 4.1550 11 054 0050 07 5.3263 11 054 0063 07 7.3575 11 054 0075 07 11.8990 11 054 0090 07 16.42

110 11 054 0110 07 21.89

Cap

20 11 053 0020 07 1.6425 11 053 0025 07 1.7332 11 053 0032 07 2.2740 11 053 0040 07 2.8950 11 053 0050 07 4.8563 11 053 0063 07 7.9175 11 053 0075 07 12.8990 11 053 0090 07 16.26

110 11 053 0110 07 25.34

25/20 11 057 2520 07 2.6732/20 11 057 3220 07 3.3032/25 11 057 3225 07 3.3040/20 11 057 4020 07 3.9240/25 11 057 4025 07 3.9240/32 11 057 4032 07 3.9250/20 11 057 5020 07 4.5450/25 11 057 5025 07 4.5450/32 11 057 5032 07 4.5450/40 11 057 5040 07 4.5463/25 11 057 6325 07 6.2663/32 11 057 6332 07 6.2663/40 11 057 6340 07 6.2663/50 11 057 6350 07 6.2675/63 11 057 7563 07 10.9590/63 11 057 9063 07 15.2590/75 11 057 9075 07 15.25

110/63 11 057 1163 07 20.81110/90 11 057 1190 07 20.81

Size Code Price

20 x 1/2 11 034 2020 07 7.9125 x 3/4 11 034 2525 07 8.9332 x 1 11 034 3232 07 11.6440 x 11/4 11 034 4040 07 13.3050 x 11/2 11 034 5050 07 20.9663 x 2 11 034 6363 07 26.27

UnionFPM O-Rings

20 11 024 1120 07 10.5625 11 024 1125 07 11.5132 11 024 1132 07 13.7640 11 024 1140 07 19.5750 11 024 1150 07 27.5363 11 024 1163 07 37.53

Male AdaptorBSP or NPT threaded

20 x 3/4 11 035 2025 07 7.4425 x 1 11 035 2532 07 9.3032 x 11/4 11 035 3240 07 11.1940 x 11/2 11 035 4050 07 18.4650 x 2 11 035 5063 07 23.30Code shown is for BSPCode for NPT on request

Code shown is for BSP.Code for NPT on request.

iIPS Flow Systems l Seaham Grange Industrial Estate l Seaham l SR7 0PT l England l Tel: 0191 521 3111 l www.ipsflowsystems.com

259

socket fusion fittings

Stub FlangeDIN or ANSI standards

Blind FlangePolypropylene with steel core drilled toBS4504 NP10/16 - black

Code shown is for DIN.ANSI code on request.

20 11 052 0020 07 2.0525 11 052 0025 07 2.1932 11 052 0032 07 2.4340 11 052 0040 07 2.9950 11 052 0050 07 3.5263 11 052 0063 07 4.6375 11 052 0075 07 10.1690 11 052 0090 07 14.32

110 11 052 0110 07 20.19

20 14 045 0020 11 50.0425 14 045 0025 11 50.8332 14 045 0032 11 52.0940 14 045 0040 11 55.8450 14 045 0050 11 63.1863 14 045 0063 11 68.8175 14 045 0075 11 80.5290 14 045 0090 11 88.66

110 14 045 0110 11 121.02

Blind FlangePolypropylene with steel core drilled toANSI 150 - grey

20 11 043 0020 11 62.5525 11 043 0025 11 63.4832 11 043 0032 11 65.0440 11 043 0040 11 69.7550 11 043 0050 11 78.9763 11 043 0063 11 86.0175 11 043 0075 11 98.2190 11 043 0090 11 110.70

110 11 043 0110 11 151.37

Complete code when orderingInsert ‘ISO’ for NP10/16; ‘A’ for ANSI150; ‘E’ for Table D/E

Backing Ring NP10/16Galvanised mild steel

Backing Ring Table D/EGalvanised mild steel

GasketEPDM

20 860-005-11NP 6.7925 860-007-11NP 7.1932 860-010-11NP 8.5440 860-012-11NP 9.0750 860-015-11NP 9.9563 860-020-11NP 14.0675 860-025-11NP 19.2590 860-030-11NP 22.26

110 860-040-11NP 28.47

Backing Ring NP10Polypropylene with steel core

20 11 014 0020 11 7.1325 11 014 0025 11 7.8332 11 014 0032 11 10.0340 11 014 0040 11 12.7250 11 014 0050 11 14.8563 11 014 0063 11 17.2275 11 014 0075 11 19.1190 11 014 0090 11 22.58

110 11 014 0110 11 26.85

Backing Ring ASA 150Polypropylene with steel core

20 11 013 0020 11 7.1325 11 013 0025 11 7.8332 11 013 0032 11 10.0340 11 013 0040 11 12.7250 11 013 0050 11 14.8563 11 013 0063 11 17.2275 11 013 0075 11 19.1190 11 013 0090 11 22.58

110 11 013 0110 11 26.85

Backing Ring ASA 150Galvanised mild steel

20 860-005-11A 6.7925 860-007-11A 7.1932 860-010-11A 8.5440 860-012-11A 9.0750 860-015-11A 9.9563 860-020-11A 14.0675 860-025-11A 19.2590 860-030-11A 22.26

110 860-040-11A 28.47

20 860-005-11E 6.0025 860-007-11E 6.7932 860-010-11E 7.1340 860-012-11E 7.3550 860-015-11E 9.0263 860-020-11E 12.7975 860-025-11E 19.1190 860-030-11E 19.43

110 D 860-040-11D 25.11110 E 860-040-11E 42.47

20 861-_-005 0.5325 861-_-007 0.6132 861-_-010 0.6740 861-_-012 0.8450 861-_-015 1.0163 861-_-020 1.7375 861-_-025 2.1290 861-_-030 2.28

110 861-_-040 3.32

GasketFPM

20 862-_-005 2.4625 862-_-007 3.6532 862-_-010 4.8240 862-_-012 7.7350 862-_-015 8.4563 862-_-020 11.1375 862-_-025 15.4790 862-_-030 21.01

110 862-_-040 35.85Complete code when orderingInsert ‘ISO’ for NP10/16; ‘A’ for ANSI150; ‘E’ for Table D/E


260

fusion spigot fittings

metric sizesTee 90˚

Tee 90˚Elongated

2025324050637590

110 11 006 0110 33 30.02125 11 006 0125 33 36.60140 11 006 0140 33 40.81160 11 006 0160 33 68.18180 11 006 0180 33 80.68200 11 006 0200 33 99.61225 11 006 0225 33 186.86250 11 006 0250 33 289.26280 11 006 0280 33 367.45315 11 006 0315 33 464.38355 11 006 0355 33 649.70400 11 006 0400 33 952.26450 11 006 0450 33 1286.88500 11 006 0500 33 1669.96

11 006 0063 17 9.3011 006 0075 17 19.0811 006 0090 17 27.2011 006 0110 17 45.0311 006 0125 17 62.3911 006 0140 17 73.5111 006 0160 17 138.2211 006 0180 17 170.4311 006 0200 17 232.2111 006 0225 17 272.0911 006 0250 17 361.2111 006 0280 17 408.1011 006 0315 17 543.3611 006 0355 17 816.2511 006 0400 17 1116.4411 006 0450 17 1458.8711 006 0500 17 1909.14

11 006 0020 11 2.5811 006 0025 11 2.5811 006 0032 11 3.3011 006 0040 11 5.1611 006 0050 11 6.9311 006 0063 11 10.7911 006 0075 11 21.7211 006 0090 11 32.3811 006 0110 11 47.6911 006 0125 11 65.5211 006 0140 11 80.3911 006 0160 11 139.6411 006 0180 11 179.0511 006 0200 11 256.4411 006 0225 11 304.9111 006 0250 11 430.7511 006 0280 11 582.4811 006 0315 11 828.7211 006 0355 11 967.8811 006 0400 11 1444.8111 006 0450 11 1907.6311 006 0500 11 2437.72

Size Code Price Code Price Code Price

PN3.2 PN6 PN10

11 066 0020 11 5.6411 066 0025 11 6.4311 066 0032 11 7.6911 066 0040 11 9.4611 066 0050 11 12.5211 066 0063 11 17.2111 066 0075 11 28.6111 066 0090 11 40.6611 066 0110 11 59.4211 066 0125 11 81.6311 066 0140 11 131.0311 066 0160 11 170.4311 066 0180 11 223.6111 066 0200 11 319.7711 066 0225 11 379.9511 066 0250 11 490.9911 066 0280 11 735.6911 066 0315 11 942.88

PN102025324050637590

110125140160180200225250280315

PN3.2 PN6

We typically hold over

Pipe Availability

195,000 metres of pipe

in stock for immediate despatch


261


ReducingTee 90˚

11 016 9032 11 33.4511 016 9050 11 34.1111 016 1132 11 49.2611 016 1150 11 50.3611 016 1263 11 70.35

11 016 1463 11 88.1811 016 1475 11 88.1811 016 1490 11 89.6111 016 1411 11 89.6111 016 1612 11 148.7111 016 1863 11 185.3011 016 1875 11 185.30

11 016 1812 11 190.7911 016 2212 11 321.3411 016 2511 11 424.5311 016 2516 11 433.14

PN10

11 016 1463 17 68.6611 016 1475 17 68.8111 016 1490 17 69.8911 016 1411 17 71.3011 016 1612 17 133.0811 016 1863 17 151.8411 016 1875 17 157.9211 016 1811 17 141.6711 016 1812 17 163.4211 016 2212 17 258.7811 016 2511 17 340.1211 016 2516 17 346.35

PN6PN3.2

PN3.2

90/3290/50

110/32110/50125/63125/90140/63140/75140/90

140/110160/125180/63180/75

180/110180/125225/125250/110250/160

ReducingTee 90˚Elongated

11 065 6350 11 17.9811 065 7532 11 28.1411 065 7550 11 28.1411 065 7563 11 28.7711 065 9063 11 40.0311 065 9075 11 40.3411 065 1163 11 59.4211 065 1175 11 59.4211 065 1190 11 60.2111 065 1290 11 82.5511 065 1211 11 82.5511 065 1663 11 162.6111 065 1675 11 164.1811 065 1690 11 164.1811 065 1611 11 168.1111 065 1890 11 225.1511 065 1816 11 225.1511 065 2063 11 296.3211 065 2090 11 296.3211 065 2011 11 296.3211 065 2012 11 296.3211 065 2016 11 296.3211 065 2275 11 380.7511 065 2290 11 380.7511 065 2211 11 382.3411 065 2216 11 383.8911 065 2218 11 384.67

11 065 3111 11 1036.7011 065 3116 11 1036.70

11 065 3122 11 1083.5911 065 3125 11 1083.59

PN1011 065 6350 17 16.74

11 065 7550 17 25.1911 065 7563 17 25.6511 065 9063 17 35.8211 065 9075 17 36.1211 065 1163 17 53.1611 065 1175 17 53.1611 065 1190 17 54.42

11 065 1211 17 73.8011 065 1663 17 146.0411 065 1675 17 150.5911 065 1690 17 150.5911 065 1611 17 151.9811 065 1890 17 203.2811 065 1816 17 203.2811 065 2063 17 272.8611 065 2090 17 272.8611 065 2011 17 272.8611 065 2012 17 272.8611 065 2016 17 272.8611 065 2275 17 343.2311 065 2290 17 343.2311 065 2211 17 344.0011 065 2216 17 344.7911 065 2218 17 346.35

11 065 3111 17 953.8411 065 3116 17 953.84

11 065 3122 17 997.6211 065 3125 17 997.62

PN663/5075/3275/5075/6390/6390/75

110/63110/75110/90125/90

125/110160/63160/75160/90

160/110180/90

180/160200/63200/90

200/110200/125200/160225/75225/90

225/110225/160225/180315/90

315/110315/160315/200315/225315/250


We can provide free installertraining either on site or at ourbespoke training facility.

Free Training

Contact Tony Charlton orTom Tate on:

0800 975 79 71


262


Bend 90˚

110 11 001 0110 33 22.84125 11 001 0125 33 25.81140 11 001 0140 33 33.32160 11 001 0160 33 43.48180 11 001 0180 33 53.01200 11 001 0200 33 65.67225 11 001 0225 33 80.85250 11 001 0250 33 99.29280 11 001 0280 33 122.76315 11 001 0315 33 174.35355 11 001 0355 33 465.97400 11 001 0400 33 651.26450 11 001 0450 33 877.20500 11 001 0500 33 1222.78

11 001 0250 17 216.5611 001 0280 17 281.4511 001 0315 17 388.5811 001 0355 17 616.0911 001 0400 17 858.4311 001 0450 17 1121.1211 001 0500 17 1415.10

11 001 0250 11 318.2111 001 0280 11 414.3611 001 0315 11 571.5211 001 0355 11 836.5611 001 0400 11 1147.7211 001 0450 11 1505.7811 001 0500 11 1942.04


PN3.2 PN6 PN10

2025324050637590

110125140160180200225

11 068 0063 17 9.0211 068 0075 17 13.2011 068 0090 17 17.2211 068 0110 17 36.2911 068 0125 17 46.1111 068 0140 17 66.9811 068 0160 17 73.8711 068 0180 17 91.3511 068 0200 17 113.1411 068 0225 17 139.44

PN3.2 PN6Multi-Bend 90˚Elongated 11 068 0020 11 3.90

11 068 0025 11 4.0311 068 0032 11 4.1911 068 0040 11 5.4411 068 0050 11 6.8411 068 0063 11 9.7711 068 0075 11 13.4911 068 0090 11 19.5811 068 0110 11 37.2411 068 0125 11 52.4811 068 0140 11 70.1611 068 0160 11 85.4811 068 0180 11 101.2311 068 0200 11 150.8311 068 0225 11 179.89

PN10

We deliver using our owndedicated vehicles or next daycarrier. Using our standarddelivery service you can expect toreceive your order within 24 hours- to your warehouse, factory orjob-site

Fast Delivery

Elbow 90˚Elongated

250280315

11 061 0250 11 362.8011 061 0280 11 543.3611 061 0315 11 679.40


PN3.2 PN6 PN10


263


PN3.2Elbow 45˚Elongated

11 060 0020 11 5.6411 060 0025 11 6.0311 060 0032 11 7.2711 060 0040 11 9.0611 060 0050 11 10.2411 060 0063 11 18.7711 060 0075 11 23.3011 060 0090 11 29.1011 060 0110 11 55.8411 060 0125 11 68.9611 060 0140 11 87.5611 060 0160 11 104.1411 060 0180 11 114.0011 060 0200 11 155.7411 060 0225 11 186.0711 060 0250 11 359.6511 060 0280 11 543.3611 060 0315 11 679.40

PN10

11 060 0063 17 16.8811 060 0075 17 20.8111 060 0090 17 26.2711 060 0110 17 50.2111 060 0125 17 61.9211 060 0140 17 78.8111 060 0160 17 93.8311 060 0180 17 102.4411 060 0200 17 140.0911 060 0225 17 167.3111 060 0250 17 322.9111 060 0280 17 488.6611 060 0315 17 608.25

PN62025324050637590

110125140160180200225250280315

Pipe supports should be free of sharp edgeswhich can damage a pipe wall. Care should alsobe taken to ensure that supports allow forexpansion and contraction of the pipe withoutrestraint.

Polypropylene pipework requires more supportthan for metallic systems. As workingtemperature increases, the distance betweensupports is reduced.

Pipe Supports

16 0.75 0.65 0.4020 0.80 0.65 0.4525 0.85 0.75 0.5032 1.00 0.85 0.5540 1.10 0.95 0.6050 1.25 1.05 0.7063 1.40 1.20 0.8075 1.55 1.30 0.8590 1.65 1.45 0.95

110 1.85 1.60 1.05125 2.00 1.70 1.10140 2.10 1.80 1.15160 2.25 1.90 1.25180 2.40 2.00 1.30200 2.50 2.15 1.35225 2.65 2.30 1.45250 2.75 2.35 1.50280 2.90 2.45 1.60315 3.05 2.60 1.65355 3.20 2.70 1.75400 3.40 2.90 1.85450 3.70 3.15 2.00500 3.85 3.25 2.05560 4.10 3.50 2.25630 4.35 3.70 2.40

PN10 Support Centres/mPipeSize 20˚C 60˚C 100˚Ci


264


ReducerConcentric

25 x 2032 x 2032 x 2540 x 2040 x 2540 x 3250 x 2550 x 3250 x 4063 x 3263 x 4063 x 5075 x 3275 x 4075 x 5075 x 6390 x 5090 x 6390 x 75

110 x 50110 x 63110 x 75110 x 90125 x 63125 x 75125 x 90

125 x 110140 x 75140 x 90

140 x 110140 x 125160 x 90

160 x 110160 x 125160 x 140180 x 90

180 x 110180 x 125180 x 140180 x 160200 x 140200 x 160200 x 180225 x 140225 x 160225 x 180225 x 200250 x 160250 x 180250 x 200250 x 225280 x 200280 x 225280 x 250315 x 200315 x 225315 x 250315 x 280

Size Code Price

PN10

11 009 7563 17 11.89

11 009 9063 17 13.3011 009 9075 17 13.30

11 009 1163 17 16.8811 009 1175 17 16.8811 009 1190 17 16.8811 009 1263 17 21.7211 009 1275 17 21.7211 009 1290 17 21.7211 009 1211 17 21.7211 009 1475 17 26.2711 009 1490 17 26.2711 009 1411 17 26.2711 009 1412 17 26.2711 009 1690 17 30.6511 009 1611 17 30.6511 009 1612 17 30.6511 009 1614 17 30.6511 009 1890 17 48.1611 009 1811 17 45.3511 009 1812 17 41.7511 009 1814 17 39.7111 009 1816 17 37.8411 009 2014 17 108.5211 009 2016 17 95.8511 009 2018 17 85.6911 009 2214 17 129.4811 009 2216 17 111.1711 009 2218 17 105.8611 009 2220 17 93.2011 009 2516 17 148.4011 009 2518 17 137.2911 009 2521 17 126.2011 009 2522 17 119.0711 009 2820 17 165.7511 009 2822 17 154.0211 009 2825 17 149.9711 009 3120 17 211.1011 009 3122 17 186.8611 009 3125 17 170.4311 009 3128 17 159.50

Code Price

PN6

11 009 2520 11 6.6411 009 3220 11 7.6911 009 3225 11 7.6911 009 4020 11 8.7611 009 4025 11 8.7611 009 4032 11 8.7611 009 5025 11 9.2411 009 5032 11 9.2411 009 5040 11 9.2411 009 6332 11 11.1911 009 6340 11 11.1911 009 6350 11 11.1911 009 7532 11 14.3211 009 7540 11 14.3211 009 7550 11 14.3211 009 7563 11 14.3211 009 9050 11 15.9611 009 9063 11 15.9611 009 9075 11 15.9611 009 1150 11 20.3311 009 1163 11 20.3311 009 1175 11 20.3311 009 1190 11 20.3311 009 1263 11 26.1211 009 1275 11 26.1211 009 1290 11 26.1211 009 1211 11 26.1211 009 1475 11 31.5911 009 1490 11 31.5911 009 1411 11 31.5911 009 1412 11 30.1911 009 1690 11 37.0711 009 1611 11 37.0711 009 1612 11 37.0711 009 1614 11 37.0711 009 1890 11 58.0111 009 1811 11 54.7411 009 1812 11 50.3611 009 1814 11 47.8611 009 1816 11 45.6511 009 2014 11 130.7111 009 2016 11 115.7111 009 2018 11 103.5311 009 2214 11 156.0411 009 2216 11 134.0111 009 2218 11 127.6011 009 2220 11 112.4611 009 2516 11 179.0511 009 2518 11 165.7511 009 2521 11 152.3011 009 2522 11 144.3311 009 2820 11 199.3611 009 2822 11 186.0711 009 2825 11 179.0511 009 3120 11 254.8811 009 3122 11 225.1511 009 3125 11 204.8311 009 3128 11 192.33

Code Price

PN3.2

ReducerConcentric

63 x 1675 x 32

110 x 63 11 007 1163 33 12.99125 x 75 11 007 1275 33 14.86

160 x 110 11 007 1611 33 47.07225 x 160 11 007 2216 33 119.00315 x 225 11 007 3122 33 137.29450 x 315 11 007 4531 33 469.09630 x 450 11 007 6345 33 581.67

Size Code Price

PN10

11 007 7532 17 10.0011 007 1163 17 13.6911 007 1275 17 15.5611 007 1611 17 50.6611 007 2216 17 133.7111 007 3122 17 151.5311 007 4531 17 519.9311 007 6345 17 784.95

Code Price

PN6

11 007 6316 11 6.8111 007 7532 11 10.8811 007 1163 11 14.4511 007 1275 11 16.2611 007 1611 11 54.2611 007 2216 11 147.1511 007 3122 11 162.6111 007 4531 11 577.77

Code PricePN3.2


265


ReducerConcentric - elongated

25 x 2032 x 2032 x 2540 x 2040 x 2540 x 3250 x 2550 x 3250 x 4063 x 3263 x 4063 x 5075 x 5075 x 6390 x 6390 x 75

110 x 63110 x 90125 x 63125 x 90

125 x 110140 x 125160 x 90

160 x 110160 x 125160 x 140180 x 125180 x 160200 x 160225 x 160250 x 160250 x 200250 x 225280 x 250315 x 200315 x 225315 x 250

Size Code Price

PN10PN6

11 067 2520 11 3.7611 067 3220 11 4.1511 067 3225 11 4.1511 067 4020 11 6.0311 067 4025 11 6.0311 067 4032 11 6.0311 067 5025 11 7.4411 067 5032 11 7.4411 067 5040 11 7.4411 067 6332 11 9.8611 067 6340 11 9.8611 067 6350 11 9.8611 067 7550 11 15.2511 067 7563 11 15.2511 067 9063 11 21.4411 067 9075 11 21.5711 067 1163 11 34.0711 067 1190 11 34.0711 067 1263 11 34.5711 067 1290 11 34.5711 067 1211 11 34.5711 067 1412 11 49.5711 067 1690 11 66.3011 067 1611 11 66.4711 067 1612 11 66.4711 067 1614 11 66.7711 067 1812 11 86.0111 067 1816 11 86.0111 067 2016 11 94.3011 067 2216 11 151.6811 067 2516 11 205.6311 067 2521 11 215.0111 067 2522 11 215.0111 067 2825 11 286.1511 067 3120 11 368.2411 067 3122 11 368.2411 067 3125 11 368.24

Code Price Code Price

PN3.2

ReducerEccentric - elongated

25 x 2032 x 2540 x 2540 x 3250 x 3250 x 4063 x 3263 x 4063 x 5075 x 5075 x 6390 x 6390 x 75

110 x 63110 x 90125 x 63125 x 90

125 x 110140 x 125160 x 90

160 x 110160 x 125160 x 140180 x 90

180 x 125180 x 160200 x 160200 x 180225 x 160225 x 180225 x 200250 x 200250 x 225

Size Code Price

PN10Code Price

PN6

11 069 2520 11 4.1511 069 3225 11 4.7811 069 4025 11 6.5711 069 4032 11 6.5711 069 5032 11 8.1311 069 5040 11 8.1311 069 6332 11 11.7311 069 6340 11 11.7311 069 6350 11 11.7311 069 7550 11 18.1411 069 7563 11 18.1411 069 9063 11 25.3411 069 9075 11 25.3411 069 1163 11 34.0711 069 1190 11 34.0711 069 1263 11 40.9711 069 1290 11 40.9711 069 1211 11 40.9711 069 1412 11 58.9611 069 1690 11 78.6511 069 1611 11 78.6511 069 1612 11 78.6511 069 1614 11 78.6511 069 1890 11 102.2611 069 1812 11 102.2611 069 1816 11 102.2611 069 2016 11 111.9711 069 2018 11 111.9711 069 2216 11 180.6111 069 2218 11 180.6111 069 2220 11 180.6111 069 2521 11 256.4411 069 2522 11 236.89

Code Price

PN3.2


266


CapElongated

11 064 0020 11 4.2911 064 0025 11 4.7811 064 0032 11 6.0311 064 0040 11 7.4411 064 0050 11 9.7011 064 0063 11 12.7511 064 0075 11 19.8711 064 0090 11 30.0211 064 0110 11 40.6611 064 0125 11 43.9511 064 0140 11 54.8811 064 0160 11 61.4511 064 0180 11 79.9111 064 0200 11 99.6111 064 0225 11 118.8411 064 0250 11 178.2711 064 0280 11 253.3111 064 0315 11 340.12

PN10

2025324050637590

110125140160180200225250280315

Size Code Price Code Price

PN3.2 PN6Code Price

CapShort

11 004 0355 11 353.4011 004 0400 11 483.9611 004 0450 11 671.5911 004 0500 11 842.80

PN10

355400450500

Size Code Price Code Price

PN3.2 PN6Code Price

202532405063

Size Code PriceUnionFPM seals

PN10

11 024 0120 11 17.5011 024 0125 11 19.0811 024 0132 11 22.9711 024 0140 11 32.3811 024 0150 11 45.8111 024 0163 11 62.39

Code Price

20 x 1/2

25 x 3/4

32 x 140 x 11/4

50 x 11/2

63 x 2

Size Code PriceMale AdaptorBSP or NPT male thread

11 033 2021 11 6.2011 033 2526 11 7.4411 033 3233 11 9.3011 033 4041 11 11.1911 033 5051 11 18.4611 033 6364 11 23.30

PN10-NPT

11 033 2020 11 6.2011 033 2525 11 7.4411 033 3232 11 9.3011 033 4040 11 11.1911 033 5050 11 18.4611 033 6363 11 23.30

PN10-BSPCode Price Code Price

20 x 1/2

25 x 3/4

32 x 140 x 11/4

50 x 11/2

63 x 2

Size Code PriceFemaleAdaptorBSP or NPT femalethread

11 032 2021 11 7.9111 032 2526 11 8.9311 032 3233 11 11.6411 032 4041 11 13.3011 032 5051 11 20.9611 032 6364 11 26.27

PN10-NPT

11 032 2020 11 7.9111 032 2525 11 8.9311 032 3232 11 11.6411 032 4040 11 13.3011 032 5050 11 20.9611 032 6363 11 26.27

PN10-BSPCode Price Code Price

PTFE TapeBS7786 Roll Size: 12m x 12mm x 0.075mm

Order Code: 767-120Price: 0.91


267

fusion spigot flanges

Stub FlangeDIN 16962

2025324050637590

110 11 012 0110 33 13.83125 11 012 0125 33 17.04140 11 012 0140 33 19.71160 11 012 0160 33 24.38180 11 012 0180 33 35.65200 11 012 0200 33 42.85225 11 012 0225 33 48.00250 11 012 0250 33 67.70280 11 012 0280 33 73.03315 11 012 0315 33 87.56355 11 012 0355 33 149.64400 11 012 0400 33 311.18450 11 012 0450 33 364.32500 11 012 0500 33 442.51560 11 012 0560 33 523.06630 11 012 0630 33 602.79

11 012 0063 17 6.1111 012 0075 17 7.2011 012 0090 17 10.4711 012 0110 17 13.8311 012 0125 17 17.0411 012 0140 17 19.7111 012 0160 17 24.3811 012 0180 17 35.6511 012 0200 17 44.5811 012 0225 17 49.8911 012 0250 17 71.3011 012 0280 17 78.3511 012 0315 17 95.6911 012 0355 17 164.1811 012 0400 17 331.5011 012 0450 17 390.9311 012 0500 17 481.6011 012 0560 17 576.2111 012 0630 17 667.67

11 012 0020 11 3.3011 012 0025 11 3.3011 012 0032 11 3.8211 012 0040 11 4.6311 012 0050 11 5.6411 012 0063 11 7.0611 012 0075 11 8.3111 012 0090 11 11.8911 012 0110 11 15.3211 012 0125 11 18.4611 012 0140 11 21.5711 012 0160 11 27.2011 012 0180 11 42.0611 012 0200 11 46.4411 012 0225 11 51.6211 012 0250 11 78.3511 012 0280 11 85.6911 012 0315 11 100.8811 012 0355 11 179.0511 012 0400 11 352.6111 012 0450 11 413.6011 012 0500 11 523.06


PN3.2 PN6 PN10

Also available to JISstandards.Please enquire fordetails.*Machined.

Also available to ANSIor JIS standards.Please enquire fordetails.

Stub FlangeElongated

11 062 0020 11 4.5411 062 0025 11 4.7811 062 0032 11 5.5711 062 0040 11 6.5711 062 0050 11 8.0511 062 0063 11 10.0911 062 0075 11 13.0511 062 0090 11 17.0411 062 0110 11 21.7211 062 0125 11 26.4411 062 0140 11 34.0711 062 0160 11 38.9411 062 0180 11 60.0511 062 0200 11 68.4911 062 0225 11 73.8011 062 0250 11 113.3811 062 0280 11 172.0111 062 0315 11 218.14

PN10

2025324050637590

110125140160180200225250280315

PN6PN3.2Size Code Price Code Price Code Price

Stub FlangeANSI

2025324050637590

110125140160180200225250280315

11 012 1020 1111 012 1025 1111 012 1032 1111 012 1040 1111 012 1050 1111 012 1063 1111 012 1075 1111 012 1090 1111 012 1110 1111 012 1125 1111 012 1140 1111 012 1160 1111 012 1180 1111 012 1200 1111 012 1225 1111 012 1250 1111 012 1280 1111 012 1315 11


PN3.2 PN6 PN10

Also available to JISstandards.Please enquire fordetails.*Machined.

on

application


268


Also available to ANSIor JIS standards.Please enquire fordetails.

2025324050637590

110125140160180200225250280315355400

14 045 0020 11 50.0414 045 0025 11 50.8314 045 0032 11 52.0914 045 0040 11 55.8414 045 0050 11 63.1814 045 0063 11 68.8114 045 0075 11 80.5214 045 0090 11 88.6614 045 0110 11 121.0214 045 0125 11 121.0214 045 0140 11 148.7114 045 0160 11 187.6214 045 0180 11 187.6214 045 0200 11 208.7614 045 0225 11 208.7614 045 0250 11 272.8614 045 0280 11 272.8614 045 0315 11 397.9414 045 0355 11 777.1414 045 0400 11 888.15

PN10Blind FlangePolypropylene with steelinsert - black

Size Code Price Code PriceCode Price

Suitable for use withbutterfly valves

Stub FlangeChamfered

11 012 9110 11 19.0811 012 9140 11 26.9011 012 9160 11 33.9611 012 9180 11 52.7011 012 9200 11 58.0111 012 9225 11 64.5911 012 9250 11 98.0511 012 9280 11 107.1211 012 9315 11 126.02

PN10

110140160180200225250280315

PN6PN3.2Size Code Price Code Price Code Price

AGRU CAD software is developed to run under AutoCadR12-DOS, R13-Windows, R14-Windows and 2000.It is specifically produced to design plastic pipingsystems.

There are several unique features:-- Drawing on centre lines

(products centred automatically) - Parts list generation- Prefab parts list (pipe cutting lengths are shown)- Automatic calculation of expansion loops

AGRU CAD contains the full AGRU range in PP, PVDFand ECTFE.

AutoCad Software


269


20 861-_-005 0.5325 861-_-007 0.6132 861-_-010 0.6740 861-_-012 0.8450 861-_-015 1.0163 861-_-020 1.7375 861-_-075 2.1290 861-_-031 2.28

110 861-_-041 3.32125 861-_-040 3.32140 861-_-051 4.27160 861-_-061 4.89180 861-_-180 9.71200 861-_-080 9.71225 861-_-082 9.71250 861-_-100 11.91280 861-_-101 11.91315 861-_-121 13.50355 861-_-141 19.04400 861-_-161 20.98

862-_-005 2.46862-_-007 3.65862-_-010 4.82862-_-012 7.73862-_-015 8.45862-_-020 11.13862-_-075 15.47862-_-031 21.01862-_-041 35.85862-_-040 35.85862-_-051 59.83862-_-061 59.83862-_-180 71.65862-_-080 71.65862-_-082 71.65862-_-100 97.53862-_-101 97.53862-_-121 101.82862-_-141 158.95862-_-161 182.97

EPDMStub Gasket FPMSize Code Price Code Price

20 14 014 0020 11* 7.1325 14 014 0025 11* 7.8332 14 014 0032 11* 10.0340 14 014 0040 11* 12.7250 14 014 0050 11* 14.8563 14 014 0063 11* 17.2275 14 014 0075 11* 19.1190 14 014 0090 11* 22.58

110 14 014 0110 11* 26.85125 14 014 0125 11* 26.85140 14 014 0140 11* 41.35160 14 014 0160 11* 47.34180 14 014 0180 11* 47.34200 14 014 0200 11* 67.41225 14 014 0225 11* 67.41250 14 014 0250 11* 107.65280 14 014 0280 11* 107.65315 14 014 0315 11* 135.27355 14 014 0355 11* 284.91400 14 014 0400 11* 322.78450 14 014 0450 11* 399.34500 14 014 0500 11* 399.34560 14 014 0560 11* 541.39630 14 014 0630 11* 541.39

11 014 0020 11 7.1311 014 0025 11 7.8311 014 0032 11 10.0311 014 0040 11 12.7211 014 0050 11 14.8511 014 0063 11 17.2211 014 0075 11 19.1111 014 0090 11 22.5811 014 0110 11 26.8511 014 0125 11 26.8511 014 0140 11 41.3511 014 0160 11 47.3411 014 0180 11 47.3411 014 0200 11 67.4111 014 0225 11 67.4111 014 0250 11 107.6511 014 0280 11 107.6511 014 0315 11 135.2711 014 0355 11 284.9111 014 0400 11 322.7811 014 0450 11 399.3411 014 0500 11 399.34

NP 10NP 10Backing RingPolypropylene with steelcore 11 013 0020 11 7.13

11 013 0025 11 7.8311 013 0032 11 10.0311 013 0040 11 12.7211 013 0050 11 14.8511 013 0063 11 17.2211 013 0075 11 19.1111 013 0090 11 22.5811 013 0110 11 26.85

11 013 0160 11 47.34

11 013 0200 11 67.41

11 013 0250 11 107.65

11 013 0315 11 135.27

ANSI 150Size Code Price Code Price Code Price

*Black

Backing RingGalvanised Mild Steel

20 860-005-12NP 6.7925 860-007-12NP 7.1932 860-010-12NP 8.5440 860-012-12NP 9.0750 860-015-12NP 9.9563 860-020-11NP 14.0675 860-025-11NP 19.2590 860-030-11NP 22.26

110 860-040-11NP 28.47125 860-125-11NP 39.64140 860-050-12NP 39.64160 860-060-14NP 45.19180 860-180-11NP 52.09200 860-080-11N 62.36225 860-225-12N 62.36250 860-100-13N 88.24280 860-280-11N 88.24315 860-120-15N 119.95355 860-140-12N 334.53400 860-160-12N 410.61

860-005-12A 6.79860-007-12A 7.19860-010-12A 8.54860-012-12A 9.07860-015-12A 9.95860-020-11A 14.06860-025-11A 19.25860-030-11A 22.26860-040-11A 28.47860-125-11A 39.64860-050-12A 39.64860-060-14A 45.19860-180-11A 52.09860-080-11A 62.36860-225-12A 62.36860-100-13A 88.24860-280-11A 88.24860-120-15A 119.95860-140-12A 334.53860-160-12A 410.61

NP10 ANSI 150Size Code Price

Complete code when orderingInsert ‘ISO’ for NP10/16; ‘A’ for ANSI 150; ‘E’ for Table D/E

Code Price


270

pp flame retardent

Pipe PPs

pipe and fittings

20 - - -25 - - -32 - - -40 - - -50 3.0 17 705 0050 0063 3.0 17 705 0063 0075 3.0 17 705 0075 0090 3.0 17 705 0090 00

110 3.0 17 705 0110 00125 3.0 17 705 0125 00140 3.0 17 705 0140 00 19.06160 3.0 17 705 0160 00 22.10180 3.0 17 705 0180 00 24.71200 3.0 17 705 0200 00 27.44225 3.5 17 705 0225 00 35.66250 3.5 17 705 0250 00 39.71280 4.0 17 705 0280 00 50.26315 5.0 17 705 0315 00 70.92355 5.0 17 705 0355 00 80.00400 6.0 17 705 0400 00 106.72450 6.0 17 705 0450 00 125.50500 8.0 17 705 0500 00 185.31560 8.0 17 705 0560 00 207.91630 10.0 17 705 0630 00 290.77710 12.0 17 705 0710 00 391.71800 12.0 17 705 0800 00 441.43900 15.0 17 705 0900 00 673.97

1000 15.0 17 705 1000 00 750.871200 18.0 17 705 1200 00 1246.51

Wall Code Price/mSize

- -- -- -- -- -

17 705 0063 33 4.92- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -

Code Price/m

17 705 0020 11 1.9317 705 0025 11 2.6117 705 0032 11 3.7217 705 0040 11 5.2917 705 0050 11 8.2117 705 0063 11 13.0117 705 0075 11 18.1917 705 0090 11 26.2817 705 0110 11 39.05

- -17 705 0140 11 63.0517 705 0160 11 82.78

- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -

Code Price/m


Ventilation PN3.2/S-16/SDR33 PN10/S-5/SDR11

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

20 - -25 - -32 - -40 - -50 - -63 - -75 - -90 - -

110 - -140 - -160 - -180 - -200 - -225 - -250 - -280 - -315 - -

Code PriceSize

- -- -- -- -- -- -- -- -

17 006 0110 33 36.10- -

17 006 0160 33 82.2517 006 0180 33 110.1317 006 0200 33 120.3317 006 0225 33 225.4917 006 0250 33 348.7117 006 0280 33 443.9817 006 0315 33 561.69

Code Price

17 006 0020 11 3.4917 006 0025 11 3.4917 006 0032 11 4.3517 006 0040 11 6.8917 006 0050 11 9.2917 006 0063 11 14.4217 006 0075 11 29.1017 006 0090 11 43.4317 006 0110 11 63.8117 006 0140 11 111.3017 006 0160 11 187.25

- -- -- -- -- -- -

Code Price

Tee 90º PN2.5 PN3.2 PN10

Flame

retardent

grade


271

pp flame retardent

20 - -25 - -32 - -40 - -50 - -63 - -75 - -90 - -

110 - -140 - -160 - -180 - -200 - -225 - -250 - -280 - -315 - -355 - -400 - -

Code PriceSize

- -- -- -- -- -- -- -- -

17 001 0110 33 27.58- -

17 001 0160 33 52.4317 001 0180 33 63.8717 001 0200 33 79.2217 001 0225 33 97.5117 001 0250 33 119.8117 001 0280 33 148.2117 001 0315 33 210.1717 001 0355 33 561.8617 001 0400 33 787.94

Code Price

17 001 0020 11 4.32- -

17 001 0032 11 4.6617 001 0040 11 6.0417 001 0050 11 7.5717 001 0063 11 10.8617 001 0075 11 14.9517 001 0090 11 21.7017 001 0110 11 41.3217 001 0140 11 77.8517 001 0160 11 94.83

- -- -- -- -- -- -- -- -

Code Price

Bend 90º PN2.5 PN3.2 PN10

63x16 - -75x32 - -

110x63 - -125x75 - -

160x110 - -225x160 - -315x225 - -

Code PriceSize

- -- -

17 007 1163 33 15.6817 007 1275 33 17.9117 007 1611 33 56.7817 007 2216 33 143.9917 007 3122 33 165.68

Code Price

17 007 6316 11 8.2117 007 7532 11 13.1617 007 1163 11 17.4317 007 1275 11 19.6817 007 1611 11 65.52

- -- -

Code Price

ReducerConcentric

PN2.5 PN3.2 PN10

20 - -25 - -32 - -40 - -50 - -63 - -75 - -90 - -

110 - -125 - -140 - -160 - -180 - -200 - -225 - -250 - -280 - -315 - -355 - -400 - -500 - -

Code PriceSize

- -- -- -- -- -- -- -- -

17 012 0110 33 16.73- -- -

17 012 0160 33 29.4417 012 0180 33 43.0217 012 0200 33 50.6717 012 0225 33 57.9417 012 0250 33 74.3317 012 0280 33 88.1517 012 0315 33 105.6117 012 0355 33 180.6717 012 0400 33 376.2617 012 0500 33 535.11

Code Price

17 012 0020 11 3.9417 012 0025 11 3.9417 012 0032 11 4.6317 012 0040 11 5.5517 012 0050 11 6.7317 012 0063 11 8.4717 012 0075 11 9.9317 012 0090 11 14.3317 012 0110 11 18.42

- -17 012 0140 11 25.9617 012 0160 11 32.72

- -- -- -- -- -- -- -- -- -

Code Price

Stub Flange PN2.5 PN3.2 PN10

Refer to page 269 for backing rings and gaskets


272

pp flame retardent - electrically conductive

Pipe PPs-el

pipe and fittings

32 - -50 - -63 - -75 - -90 - -

110 3.0 19 705 0110 00 74.48160 3.0 19 705 0160 00 109.27180 3.0 19 705 0180 00 123.11200 3.0 19 705 0200 00 136.91225 3.5 19 705 0225 00 173.59250 3.5 19 705 0250 00 207.81315 5.0 19 705 0315 00 349.04355 5.0 19 705 0355 00 393.96400 6.0 19 705 0400 00 444.91

- -- -- -- -

19 705 0090 33 48.8619 705 0110 33 74.3719 705 0160 33 152.44

- -19 705 0200 33 236.8119 705 0225 33 293.40

- -- -- -- -

Code Price/mWall Code Price/mSize

- -- -- -- -- -

19 705 0110 17 127.8819 705 0160 17 268.78

- -19 705 0200 17 417.46

- -- -- -- -- -

Code Price/m

19 705 0032 11 15.9519 705 0050 11 41.0819 705 0063 11 64.9719 705 0075 11 90.6319 705 0090 11 131.0019 705 0110 11 176.38

- -- -- -- -- -- -- -- -

Code Price/m

Standard length 5mPlease note that a transportation surcharge may be applied on pipe diameters 250mm or larger - please enquire for details

Ventilation PN3.2/S-16/SDR33 PN6/S-8.3/SDR17 PN10/S-5/SDR11

32 - -50 - -63 - -75 - -90 - -

110 19 006 0110 33 57.17160 19 006 0160 33 130.21200 19 006 0200 33 190.68225 19 006 0225 33 357.13250 19 006 0250 33 552.53315 19 006 0315 33 887.39

Code PriceSize

- -- -- -- -- -

19 006 0110 17 85.9319 006 0160 17 264.3419 006 0200 17 443.43

- -- -- -

Code Price

19 006 0032 11 6.8719 006 0050 11 14.7119 006 0063 11 22.8519 006 0075 11 46.1419 006 0090 11 68.8319 006 0110 11 101.88

- -- -- -- -- -

Code Price

Tee 90º PN3.2 PN6 PN10

Electrically

conductive

grade


273

pp flame retardent - electrically conductive

32 - -50 - -63 - -75 - -90 - -

110 19 001 0110 33 43.69160 19 001 0160 33 83.01200 19 001 0200 33 125.55225 19 001 0225 33 154.46250 19 001 0250 33 189.83315 19 001 0315 33 333.23

Code PriceSize

- -- -- -- -- -

19 001 0110 17 63.7919 001 0160 17 129.8419 001 0200 17 197.07

- -- -- -

Code Price

19 001 0032 11 7.4119 001 0050 11 12.0019 001 0063 11 17.2019 001 0075 11 23.7319 001 0090 11 34.3419 001 0110 11 66.00

- -- -- -- -- -

Code Price

Bend 90º PN3.2 PN6 PN10

63x16 - -75x32 - -110x63 - -160x110 19 007 1611 33 89.91225x160 19 007 2216 33 227.59315x225 19 007 3122 33 262.42

Code PriceSize

- -- -- -

19 007 1611 17 91.4919 007 2216 17 255.52

- -

Code Price

19 007 6316 11 13.0419 007 7532 11 20.8019 007 1163 11 27.56

- -- -- -

Code Price

ReducerConcentric

PN3.2 PN6 PN10

32 - -50 - -63 - -75 - -90 - -

110 19 012 0110 33 26.48 160 19 012 0160 33 46.65200 19 012 0200 33 81.88225 19 012 0225 33 91.84250 19 012 0250 33 129.49315 19 012 0315 33 167.28

Code PriceSize

- -- -- -- -- -

19 012 0110 17 26.4819 012 0160 17 46.6519 012 0200 17 85.16

- -- -- -

Code Price

19 012 0032 11 7.2819 012 0050 11 10.7019 012 0063 11 13.3619 012 0075 11 15.8319 012 0090 11 22.6919 012 0110 11 29.41

- -- -- -- -- -

Code Price

Stub Flange PN3.2 PN6 PN10

32 19 014 0032 11 21.0150 19 014 0050 11 31.0363 19 014 0063 11 35.8175 19 014 0075 11 39.7190 19 014 0090 11 47.26

110 19 014 0110 11 75.41140 - -160 19 014 0160 11 109.84200 - -225 - -250 - -315 - -

Code PriceSize

Backing RingBS 4504 EN1072 NP10

PPs-el

Refer to page 269 for backing rings andgaskets

Gaskets

i


274

filters and strainers

Hayward Simplex Basket StrainerDescription: In-line strainer with serviceable basket filterMounting: VerticalMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneStrainer Basket: Polypropylene or 316 Stainless SteelStrainer Mesh Sizes: PP: 1/32”, 1/16”, 1/8”, 3/16”Stainless Steel: 20, 40, 60, 80, 100, 150, 200, 325 meshSeals: FPMEnd Connections: NPT Threaded or FlangedGauge: Optional

PP BodyPP Basket

1” BSS401 00T11/2” BSS401 50T

2” BSS402 00T

PP BodySt/St Basket

1” BS401 00T11/2” BS401 50T

2” BS402 00T

NPT Female Threaded NPT Female Threaded

PP BodyPP Basket

1” BSS401 00F11/2” BSS401 50F

2” BSS402 00F

PP BodySt/St Basket

1” BS401 00F11/2” BS401 50F

2” BS402 00F

Flanged ANSI 150 Flanged ANSI 150

1” BS401001/_11/2, 2” BS402001/_To specify the mesh size, add to part number e.g. 3” basket c/w 1/32” mesh = BS103001/32

Spare PP Basket

1” BS710(XX)11/2, 2” BS720(XX)To specify the mesh size, add to part number e.g. 2” basket c/w 60 mesh = BS72060

Spare Stainless Steel Basket

on

application on

application

on

application on

application

on

application

on

application


275

filters and strainers

Length Connection Simplex Duplex

Code Price Code PriceSingle 2” FPT FLT4201 -Single 2” ASA 150 FLT4201F -Double 2” FPT FLT4202 -Double 2” ASA 150 FLT4202F FLT2DUP

Length Gauge Code PriceSingle* 1 micron F31R36590Single* 5 micron F31R36817Single* 10 micron F31R36552Single* 25 micron F31R36596Single* 50 micron F31R36589Single* 100 micron F31R36551Single* 200 micron F3AB00319

Double** 1 micron F31R36502Double** 5 micron F31R36501Double** 10 micron F31R36503Double** 25 micron F31R36412Double** 50 micron F31R36500Double** 100 micron F31R36505Double** 200 micron F3AB00222

Hayward Bag FilterDescription: In-line strainer with replaceable bag filterMounting: In a horizontal positionMaximum Fluid Pressure at 20˚C: 15.5 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: Glass filled PolypropyleneStrainer Basket: ClothStrainer Mesh Sizes: 5, 10, 25, 50, 100 micronSeals: FPMEnd Connections: 2” NPT Female Threaded, flanged ASA 150Gauge: Optional

Polypropylene Filter Bags - Welded Construction

Single or Double Bag Filter

Length Gauge Code PriceSingle* 1 micron F3AB00013Single* 5 micron F3AB00157Single* 10 micron F3AB00019Single* 25 micron F3AB00020Single* 50 micron F3AB00014Single* 100 micron F31A37288Single* 200 micron F3AB00103

Double** 1 micron F31B36372Double* 5 micron F31B37455Double* 10 micron F3AA01434Double* 25 micron F3AB00002Double* 50 micron F3AA00160Double* 100 micron F3AA01128Double** 200 micron F3AB00057

Polypropylene Filter Bags - Sewn Construction

Length Gauge Code PriceSingle* 150 micron F3AB00170Single* 400 micron F3AB00173Single* 600 micron F3AB00174Single* 800 micron F3AB00175Double* 150 micron F3AB00177Double* 400 micron F3AB00180Double* 600 micron F3AB00181Double* 800 micron F3AB00182

Polypropylene Monofilament Filter Bags -Sewn Construction

Note: Filter bags are sold in box quantities only*Box quantity 50** Box quantity 30

on

applicationon

application

on

application

on

application

on

application


276

manual valves

Tagging PointLockable Handle

Valve Bracket

Valve Dimensions

Praher S4 Ball Valve

Actuation

Materials

Body - PolypropyleneBall Seat - PTFESeals - EPDM or FPM

Sizes

3/8” - 4”/16mm - 110mm

Pressure Rating

3/8”/16mm to 2.1/2”/75mm - 10 bar3” - 4”/90mm - 110mm - 6 bar

Connections

Fusion SocketsFusion SpigotsBSP Female ThreadedFlanged PN10

Dimensions in mm

Features

• Lockable Handle (Lock not supplied)• True Union design for easy maintenance• Full bore design• Tagging point included• Matched Valve bracket for panel mounting and retrofit actuation.• Pneumatically and Electrically actuated versions available• Silicone free on request

d 16 20 25 32 40 50 63 75 90 110

DN 10 15 20 25 32 40 50 65 80 80

G 3/8” 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3 4

L 114.0 124.0 144.0 154.0 174.0 194.0 224.0 284.0 300.0 340.0

L1 120.0 130.0 150.0 160.0 180.0 200.0 230.0 290.0 310.0 350.0

A 62.0 62.0 69.0 73.0 83.0 94.0 108.0 133.0 160.0 160.0

Z 71.0 67.5 79.0 84.0 96.0 114.0 134.0 162.0 208.0 207.0

t 14.5 16.0 17.0 19.5 22.0 25.0 29.0 34.5 38.5 44.0

D 52.5 52.5 62.0 69.5 8.0 100.0 120.5 155.0 187.0 187.0

H 71.5 71.5 77.0 80.5 98.5 106.5 115.5 142.0 160.0 160.0

B 40.0 40.0 51.5 51.5 64.0 73.0 85.0 110.0 132.0 132.0

PN 10 10 10 10 10 10 10 10 6 6

Weight 0.16 0.16 0.23 0.28 0.47 0.74 1.11 2.28 3.87 3.87


277

manual valves

EPDM SealsPTFE Seats

16 12 1377 58.4920 12 1412 60.6725 12 1380 73.5132 12 1382 83.8040 12 1384 105.8650 12 1386 131.5063 12 1388 167.3175 12 1390 378.4290 12 1392 577.00

110 12 2115 673.93

16 12 1431 58.4920 12 1433 60.6725 12 1435 73.5132 12 1437 83.8040 12 1439 105.8650 12 1441 131.5063 12 1443 167.3175 12 1445 378.4290 12 1447 577.00

110 12 2509 673.93

1/2 12 2301 94.443/4 12 2302 108.99

1 12 2303 139.8011/4 12 2304 168.2411/2 12 2305 214.84

2 12 2306 257.5521/2 12 2307 483.47

3 12 2308 697.224 12 5510 814.33

3/8 12 1394 61.611/2 12 1396 63.653/4 12 1398 77.10

1 12 1400 96.4811/4 12 1402 110.8711/2 12 1404 148.40

2 12 1406 175.9221/2 12 1408 393.26

3 12 1410 602.01

FPM SealsPTFE Seats

3/8 12 1395 53.011/2 12 1397 55.203/4 12 1399 66.62

1 12 1401 75.3711/4 12 1403 96.0111/2 12 1405 121.51

2 12 1407 157.4721/2 12 1409 354.95

3 12 1411 544.95


FPM SealsPTFE Seats

16 12 1430 50.2120 12 1432 52.2225 12 1434 62.7332 12 1436 71.1540 12 1438 91.0150 12 1440 114.7563 12 1442 147.6275 12 1444 340.1290 12 1446 519.93

110 12 2508 601.23


FPM SealsPTFE Seats

1/2 12 2294 86.013/4 12 2295 98.21

1 12 2170 127.1211/4 12 2296 153.3911/2 12 2168 198.12

2 12 2297 237.8521/2 12 2298 445.18

3 12 2299 640.164 12 2267 741.64


FPM SealsPTFE Seats

Praher Type S4 Ball Valve

16 12 1378 50.2120 12 1379 52.2225 12 1381 62.7332 12 1383 71.1540 12 1385 91.0150 12 1387 114.7563 12 1389 147.6275 12 1391 340.1290 12 1393 519.93

110 12 2094 601.23

Description: In-line double union ball valve with lockable handleMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 16mm to 75mm - 10bar;Sizes 90mm to 110mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDM or FPMSeats: PTFEEnd Connections: Fusion sockets, fusion spigots,BSP Female Threaded, Flanged BS4504 EN1092 PN10Option: Silicon-free

MM Fusion Sockets

BSP Female Threaded

MM Fusion Spigots

Flanged PN10 Flanged PN10

MM Fusion Spigots

BSP Female Threaded

MM Fusion Sockets


278

manual valves

Praher T4 Diaphragm Valve

Visual PositionIndicator

Lockable Handle Optional ValveSupport Plates

Valve Dimensions

General

Sealing material: EPDM / EPDM-PTFE /FPM

Body material: PPDimensions: DN 15/d 20 - DN125/d140

Operating Pressure

DN 15 / 1/2” - DN 125 / 5” 10 bar

Connections

PP union sockets 20mm-63mmPP fusion spigots 20mm-110mmFlanged PN10 20mm-140mm

Technical Specification

For example:TYPE PRAHER, DIN 2403PP Diaphragm valve T4 DN 15 d20PP mm fusion spigotSealing material EPDM-PTFESafety gear wheelMax. Operating pressure 10 bar

Dimensions in mm

Features

• Safety gear wheel• Corrosion Resistant• Maintenance free operation over a long working life• Suitable for aggressive and dirty media• Radial installation or removal• Easy replacement of the diaphragms

d 20 25 32 40 50 63 75 90 110 140

DN 15 20 25 32 40 50 65 80 100 125

G 1/2” 3/4” 1” 11/4” 11/2” 2” 21/2” 3” 4” 5”

M 16.5 16.5 20.1 31.5 31.5 38.6 25.0 25.0 25.0 25.0

H 100.0 100.0 107.0 144.0 144.0 170.0 260.0 260.0 330.0 330.0

B 86.0 86.0 86.0 136.0 136.0 136.0 234.0 234.0 234.0 234.0

F 24.5 24.5 24.5 43.5 43.5 43.5 - - - -

Lift 9.0 9.0 11.0 22.0 22.0 28.0 35.0 35.0 45.0 45.0

K M6 M6 M6 M8 M8 M8 - - - -

L 124.0 144.0 154.0 174.0 194.0 224.0 284.0 300.0 340.0 -

L1 130.0 150.0 160.0 180.0 200.0 230.0 - 310.0 350.0 400.0

T 12.0 12.0 12.0 15.0 15.0 15.0 - - - -

t 28.5 36.0 36.0 38.5 46.0 46.0 37.0 37.0 50.0 -

PN 10 10 10 10 10 10 10 10 10 10

DN 15 - DN 50 DN 65 - DN 80


279

manual valves

EPDM Diaphragm

20 12 0229 101.6425 12 0230 109.7832 12 0231 130.1040 12 0232 165.7550 12 0233 198.5963 12 0235 252.5375 12 0237 492.5690 12 0238 548.84

110 12 0909 975.72140 12 0910 1823.22

20 12 0250 164.1825 12 0251 172.7932 12 0252 196.2640 12 0253 258.7850 12 0255 290.8563 12 0257 391.6875 12 0258 586.3690 12 0260 808.40

110 12 0912 1180.57140 12 0913 2085.90

EPDM Diaphragm

20 12 0173 139.0125 12 0175 147.9332 12 0177 172.0140 12 0178 217.3550 12 0179 261.1463 12 0180 331.5075 12 0181 561.3690 12 0182 655.95

110 12 0905 1008.55

PTFE Diaphragm

PTFE Diaphragm

20 12 5038 84.6125 12 5039 88.6632 12 5040 108.2040 12 5041 129.8050 12 5042 168.8663 12 5043 205.63

EPDM Diaphragm

Praher Type T4 Diaphragm Valve

20 12 0150 68.3325 12 0154 76.4632 12 0155 97.5940 12 0156 113.8250 12 0157 149.4963 12 0158 186.8675 12 0159 437.8390 12 0160 475.36

110 12 0902 803.72

Description: In-line diaphragm valve with position indicatorMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneDiaphragm: EPDM, FPM or PTFE (EPDM backed)End Connections: Fusion spigots, flanged BS4504 EN1092Option: Silicon-free

MM Fusion Spigots MM Fusion Spigots

MM Union Sockets

20 12 5050 153.2525 12 5051 160.2832 12 5052 233.7840 12 5053 262.6950 12 5054 340.1263 12 5055 362.76

PTFE Diaphragm

MM Union Sockets


20 12 0161 139.0125 12 0163 147.9332 12 0164 172.0140 12 0165 217.3550 12 0166 261.1463 12 0170 331.5075 12 0171 693.2490 12 0172 729.70

20 12 0239 164.1825 12 0240 172.7932 12 0241 196.2640 12 0242 258.7850 12 0243 290.8563 12 0246 391.6875 12 0248 670.6790 12 0249 805.94

FPM Diaphragm FPM Diaphragm

MM Fusion Spigots Flanged PN10

Spears Needle Valve

Description: Globe or Angle pattern flow control valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeal: PTFEEnd Connections: Female NPT ThreadedFeature: Built-in panel or bracket mounting nut

1/4 5591- 002P 69.123/8 5591- 003P 69.12

Globe Pattern Valve

1/4 5691- 002P 69.123/8 5691- 003P 69.12

Angle Pattern Valve


280

manual valves


16 124898 150.4220 124902 151.0525 125022 153.7332 124906 155.2640 125024 235.3350 124910 244.7263 124914 307.26

16 124899 150.4220 124903 151.0525 125023 153.7332 124907 155.2640 125025 235.3350 124911 244.7263 124915 307.26

FPM SealsPTFE Seats

16 124768 128.7120 124772 129.4825 125015 130.4232 124776 131.3440 125017 194.6850 124891 197.0263 124895 239.24


FPM SealsPTFE Seats

Praher Type S4 T & L-Port Ball Valve

16 124767 128.7120 124771 128.7125 125014 130.4232 124775 131.3440 125016 194.6850 124890 197.0263 124894 239.24

Description: In-line horizontal T-port or L-port ball valve with lockable handle andunion endsMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDM or FPMSeats: PTFEEnd Connections: Fusion sockets or fusion spigots

T-Port Ball Valve

L-Port Ball Valve

MM Fusion Sockets

MM Fusion Sockets MM Fusion Sockets

MM Fusion Sockets


20 132 679 75.1725 132 680 81.4232 132 681 87.6640 132 682 93.88

FPM SealsPTFE Seats

ASV Stubbe ProfiDos 101 Dosing Ball Valve

20 132 667 64.8225 132 668 67.5232 132 669 70.3440 132 670 73.06

Description: In-line double union ball valve with flow indicatorMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDM or FPMSeats: PTFEEnd Connections: Fusion socketsFeatures: Accurate flow control with visible indicator


Also available with fusion spigot connections. Prices are the same as above.

Valve bracket shown in PVC-U

Praher Valve Bracket for Type S4 T & L-Port Valve

16 17.0511 31.5920 17.0511 31.5925 17.0512 35.6532 17.0512 35.6540 17.0513 40.3450 17.0513 40.3463 17.0514 40.34

Size Code Price


Praher Type S4 Ball Valve with Actuator Adaptor Kit

Praher Valve Bracket for Type S4 Ball Valve

16 122 511 117.5920 122 512 119.7425 122 513 131.5832 122 514 141.5940 122 515 191.4550 122 516 216.5263 122 517 249.9475 122 518 461.1490 122 519 638.14

110 122 520 731.59

EPDM Seals

Size Code Price16 126.518 136.1220 on application25 on application32 120.416 160.1440 on application50 122.700 240.0863 120.417 277.3275 on application90 120.418 709.56

110 on application

FPM Seals

Size Code Price

Includes:Polypropylene BallValve, PolypropyleneValve Bracket, Console,Actuator Adaptor, ScrewSet

16 17.0279 30.9620 17.0279 30.9625 17.0280 33.1632 17.0281 35.1940 17.0228 37.5350 17.0230 39.3963 17.0232 41.7575 17.0275 58.3390 17.0282 65.21

110 17.0282 65.21

Size Code Price

Valve shown with bracket

Prices on request for BSP threaded sockets or PN10 flanged connections

281

manual valve accessories

Diaphragm Valve Mounting PlateEnsures clearance of union nut from mounting surfaceComplete with two fixing screws.

20 16.0 14 0103 5.7925 23.0 14 0102 5.7932 23.0 14 0102 5.7940 18.5 14 0123 9.4150 23.5 14 0109 9.4163 23.5 14 0109 9.41

Valve PlateSize Thickness Code Price

(mm)

Mounting plate shown fitted to valve

20/1/2 05.0457 22.8425/3/4 05.0457 22.8432/1 05.0458 24.2440/11/4 05.0459 27.6850/11/2 05.0459 27.6863/2 05.0460 28.7775/21/2 12.0933 59.7390/3 12.0933 59.73110/4 12.0934 135.425 12.0934 135.42

EPDM Diaphragm

20/1/2 05.0465 107.1225/3/4 05.0465 107.1232/1 05.0466 111.3440/11/4 05.0467 123.2250/11/2 05.0467 123.2263/2 05.0468 366.1475/21/2 12.0935 404.6090/3 12.0935 404.60110/4 12.0936 502.615 12.0936 502.61

FPM Diaphragm

20/1/2 05.0473 46.2625/3/4 05.0473 46.2632/1 05.0474 51.9040/11/4 05.0475 64.4250/11/2 05.0475 64.4263/2 05.0476 72.8875/21/2 12.0918 354.9590/3 12.0918 354.95110/4 12.0919 406.555 12.0919 406.55

EPDM/PTFE Diaphragm

Replacement T4 Diaphragm


282

manual valves

Universal DrillingLocking Handle

PP-GF BodyPP disc

Valve Dimensions

Praher K4 Butterfly Valve

Support Lugs inBase

Materials

Body - PP-GFDisc - PolypropyleneSeals - EPDM or FPM

Sizes

21/2”/75mm - 8”/225mm

Pressure Rating

PN10

Connections

Between flanges, universaly drilled

Dimensions in mm

Features

• Only Body Seal and Disc in contact with media • Double sealed shaft• Valve support lugs in base• Direct actuator mounting• Low torque operation• Multi-position Lockable Handle• Manual or Gear operation• All sizes PN10 rated• Universal drilling - can be used withDIN, ANSI, BS and JIS flanges

Size 21/2”/75 3”/90 4”/110 6”/160 8”/225

A 230 230 300 386 386

D 65 80 100 150 200

C 133 176 206 261 314

W 90º 45º 45º 45º 45º

J 19 19 19 23 23

K 127-145 146-160 175-190.5 234.5-241.3 290-298.5

H 285 292 322 396 458

h 100 100 115 147.5 175

E 98 116 146 196 251

M 114 114 114 150 150

Z 46 49 56 70 71

PN 10 bar 10 bar 10 bar 10 bar 10 bar


283

manual valves

EPDM Seals 21/2”/75 12.5870 217.303”/90 12.5871 255.01

4”/110 12.5872 278.835”/140 12.8458 390.846”/160 12.5873 454.458”/225 12.5874 637.02

EPDM Seals 21/2”/75 12.6020 438.773”/90 12.6021 476.48

4”/110 12.6022 489.685”/140 On Application

6”/160 12.6023 670.568”/225 12.6024 853.14

Praher Type K4 Butterfly Valve

Description: Lug style butterfly valve with universal drilling formounting between flanges. (DIN, ANSI & BS)Construction:Body: PP-GFDisc: PolypropyleneSeals: EPDM or FPMPressure rating: PN10Size: 21/2”/75mm - 8”/225mm

NEW

Lever Operated

Gear Operated

FPM Seals 21/2”/75 12.5875 302.363”/90 12.5876 364.16

4”/110 12.5877 349.375”/140 12.8459 520.446”/160 12.5878 587.418”/225 12.5879 797.77

FPM Seals 21/2”/75 12.6025 518.153”/90 12.6026 585.63

4”/110 12.6027 612.725”/140 On Application

6”/160 12.6028 803.528”/225 12.6029 1013.88

Lever Operated

Gear Operated


284

manual valves

Asahi Type 57 Butterfly ValveDescription: Wafer style butterfly valveMounting: In any position, between flanges to ANSI 150Maximum Fluid Pressure at 20˚C: Sizes 11/2” to 10” : 10 bar Sizes 12” to 14” : 6.9 bar; 16” : 5.8 bar; 18” : 5.1 bar; 20” to 24” : 3.4 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PolypropyleneDisc: Polypropylene or PVDFSeals: EPDM, FPM or NitrileShaft: Stainless Steel 316End Connections: Flange mounted (flanges not included)

Lever OperatedEPDM Seals

11/2 3752-015 762.282 3752-020 799.09

21/2 3752-025 1013.823 3752-030 1133.444 3752-040 1213.206 3752-060 1923.338 3752-080 2866.58

Polypropylene Disc

Lever OperatedFPM Seals

11/2 3753-015 866.582 3753-020 900.31

21/2 3753-025 1213.203 3753-030 1256.144 3753-040 1337.446 3753-060 2819.048 3753-080 3257.70

Lever OperatedEPDM Seals

11/2 3740-015 866.582 3740-020 903.39

21/2 3740-025 1139.583 3740-030 1285.294 3740-040 1383.466 3740-060 2328.248 3740-080 3518.45

Lever OperatedFPM Seals

11/2 3741-015 970.862 3741-020 1006.15

21/2 3741-025 1338.963 3741-030 1408.004 3741-040 1509.226 3741-060 3223.968 3741-080 3908.02

PVDF Disc

EPDM Seals 3"/90 12 1931 440.954"/110 12 1932 522.275"/140 12 2310 655.186"/160 12 1933 736.498"/225 12 1934 942.88

3"/90 12 2550 994.484"/110 12 2551 1041.395"/140 12 2552 1153.986"/160 12 2553 1183.688"/225 12 2554 1338.47

FPM Seals

3"/90 12 2545 935.074"/110 12 2546 977.275"/140 12 2547 1064.836"/160 12 2548 1107.068"/225 12 2549 1238.40

EPDM Seals FPM Seals

Praher Type S4 Butterfly Valve

3"/90 12 1927 381.534"/110 12 1928 458.145"/140 12 2544 566.046"/160 12 1929 659.068"/225 12 1930 842.80

Description: Wafer style butterfly valveMounting: In any position, between flanges to BS 4504 EN1072 PN10Maximum Fluid Pressure at 20˚C: Sizes 90mm to 140mm - 10 bar;Sizes 160mm to 225mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body and Disc: PolypropyleneSeals: EPDM or FPMShaft: Stainless steel 304End Connections: Flange mounted (flanges not included)

Lever operated Lever operated

Gear operated Gear operated


285

manual valves

Plasgear OperatedEPDM Seals

11/2 3726-015 1162.602 3726-020 1199.40

21/2 3726-025 1415.653 3726-030 1533.764 3726-040 1615.056 3726-060 2322.118 3726-080 3216.29

10 3726-100 3679.4712 3726-120 5128.8914 3726-14016 3726-160

Polypropylene Disc

Metal Gear OperatedEPDM Seals

12 3801-12014 3801-14016 3801-16018 3801-18020 3801-20024 3801-240

Plasgear OperatedFPM Seals

11/2 3727-015 1266.892 3727-020 1300.64

21/2 3727-025 1615.053 3727-030 1656.464 3727-040 1739.286 3727-060 3219.358 3727-080 3582.86

10 3727-100 4941.7612 3727-120 6903.4414 3727-14016 3727-160

Metal Gear OperatedFPM Seals

12 3803-12014 3803-14016 3803-16018 3803-18020 3803-20024 3803-240

Plasgear OperatedNitrile Seals

11/2 3735-015 1162.602 3735-020 1199.40

21/2 3735-025 1415.653 3735-030 1533.764 3735-040 1615.056 3735-060 2322.118 3735-080 3216.29

10 3735-100 3679.4712 3735-120 5128.8914 3735-14016 3735-160

Metal Gear OperatedNitrile Seals

12 3802-12014 3802-14016 3802-16018 3802-18020 3802-20024 3802-240

Plasgear OperatedEPDM Seals

11/2 3736-015 1266.892 3736-020 1305.22

21/2 3736-025 1541.423 3736-030 1687.134 3736-040 1785.296 3736-060 2728.558 3736-080 3868.14

10 3736-100 4828.2712 3736-120 6711.7314 3736-14016 3736-160

PVDF Disc

Metal Gear OperatedEPDM Seals

12 3804-12014 3804-14016 3804-16018 3804-18020 3804-20024 3804-240

Plasgear OperatedFPM Seals

11/2 3737-015 1372.722 3737-020 1404.92

21/2 3737-025 1740.813 3737-030 1808.304 3737-040 1909.526 3737-060 3625.818 3737-080 4234.70

10 3737-100 6090.5512 3737-120 8484.7414 3737-14016 3737-160

Metal Gear OperatedFPM Seals

12 3805-12014 3805-14016 3805-16018 3805-18020 3805-20024 3805-240

onapplication

on

application

onapplication

onapplication

onapplication

onapplication

onapplication

onapplication

on

application

onapplication

on

application

onapplication

onapplication

on

application on

application


286

manual valves

Universal DrillingVisual PositionIndicator

Valve Dimensions

Praher K4 Check Valve

85º MaxOpening

Materials

Body - PP-GFDisc - PP-GFSeals - EPDM or FPM

Sizes

21/2”/75mm - 10”/250mm

Pressure Rating

PN10

Connections

Between flanges, universaly drilled

Dimensions in mm

Features

• Excellent Flow Rates• Wide opening (85%)• Low pressure drop• Visual open-closed indicator• Spring return• All sizes PN10 rated• Universal drilling - can be used withDIN, ANSI, BS and JIS flanges

DN A B C K W

65 115 63 20 139-145 90º

80 128 71 20 150-160 45º

100 155 80 20 175-191 45º

150 212 106 24 234-242 45º

200 264 140 24 290-299 45º

250 325 140 27 350-362 30º

DN 65 80 100 150 200 250 300

Nm 15 18 20 40 55 60 65

Tightening torque for flange connections


287

manual valves

EPDM Seals 21/2”/75 12.5832 324.623”/90 12.5833A 358.03

4”/110 12.5834A 428.876”/160 12.5835A 588.988”/225 12.5836 1053.49

10”/250 12.5837 1767.34

FPM Seals 21/2”/75 12.5839 366.993”/90 12.5840A 416.75

4”/110 12.5841A 495.136”/160 12.5842A 669.818”/225 12.5843 1146.13

10”/250 12.5844 1874.12

Praher Type K4 Check Valve

Description: Lug style check valve with universal drilling for mountingbetween flanges. (DIN, ANSI & BS)Construction:Body: PolypropyleneSeals: EPDM or FPMPressure rating: PN10Size: 21/2”/75mm - 10”/250mm

Pressure loss based on maximum opening of 85%

Kv Value Table

Pressure Lost 1 bar 0.001 bar

DN 80 2958 l/min 94 l/min

DN 100 5633 l/min 178 l/min

DN 150 12466 l/min 394 l/min

DN 200 21166 l/min 699 l/min

NEW


288

manual valves

EPDM Seals 16 12 1551 44.5820 12 1553 46.4425 12 1555 53.4932 12 1557 62.2440 12 1559 70.8450 12 1561 93.9963 12 1563 134.1675 12 1565 325.2490 12 1567 433.92

110 12 2542 516.79

16 12 1569 44.5820 12 1571 46.4425 12 1573 53.4932 12 1575 62.2440 12 1577 70.8450 12 1579 93.9963 12 1581 134.1675 12 1583 325.2490 12 1585 433.92

110 12 2543 516.79

FPM Seals

16 12 1568 37.3820 12 1570 39.2625 12 1572 44.5832 12 1574 51.7540 12 1576 58.4950 12 1578 79.7663 12 1580 118.2075 12 1582 293.1990 12 1584 385.43

110 12 2540 468.31


Praher Type S4 Air Release Valve

16 12 1550 37.3820 12 1552 39.2625 12 1554 44.5832 12 1556 51.7540 12 1558 58.4950 12 1560 79.7663 12 1562 118.2075 12 1564 293.1990 12 1566 385.43

110 12 2539 468.31

Description: In-line air release valveMounting: In a vertical positionMaximum Fluid Pressure at 20˚C: Sizes 16mm to 75mm - 10 bar;Sizes 90mm to 110mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: Polypropylene Seals: EPDM or FPM Cone: PolypropyleneEnd Connections: Fusion sockets, fusion spigots or female BSP threaded

EPDM Seals 16 12 1605 49.8920 12 1607 51.9025 12 1609 58.9632 12 1611 67.0840 12 1613 82.5550 12 1615 105.7163 12 1617 141.8375 12 1619 336.9690 12 1621 441.74

110 12 2537 524.61

16 12 1623 49.8920 12 1625 51.9025 12 1627 58.9632 12 1629 67.0840 12 1631 82.5550 12 1633 105.7163 12 1635 141.8375 12 1637 336.9690 12 1639 441.74

110 12 2538 524.61

FPM Seals

16 12 1622 42.8520 12 1624 44.5825 12 1626 49.8932 12 1628 56.3040 12 1630 70.2350 12 1632 91.4963 12 1634 126.0275 12 1636 305.7190 12 1638 394.04

110 12 2536 476.90


Praher Type S4 Foot Valve

16 12 1604 42.8520 12 1606 44.5825 12 1608 49.8932 12 1610 56.3040 12 1612 70.2350 12 1614 91.4963 12 1616 126.0275 12 1618 305.7190 12 1620 394.04

110 12 2535 476.90

Description: In-line foot valve with screenMounting: In a vertical positionMaximum Fluid Pressure at 20˚C: Sizes 16mm to 75mm - 10 bar;Sizes 90mm to 110mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: Polypropylene Seals: EPDM or FPM Cone: Polypropylene (weighted)End Connections: Fusion sockets, fusion spigots or female BSP threaded

MM Fusion Sockets

MM Fusion Spigots



MM Fusion Spigots

MM Fusion Sockets


289

manual valves

EPDM Seals 16 12 1838 51.9020 12 1839 53.4925 12 1840 62.2432 12 1841 73.0340 12 1842 88.0650 12 1843 108.5263 12 1844 144.0275 12 1845 339.3190 12 1846 446.42

110 12 2533 529.29

16 12 1514 51.9020 12 1516 53.4925 12 1518 62.2432 12 1521 73.0340 12 1523 88.0650 12 1525 108.5263 12 1527 144.0275 12 1529 339.3190 12 1531 446.42

110 12 2534 529.29

3/8 12 1533 59.261/2 12 1535 60.993/4 12 1537 72.09

1 12 1539 83.8011/4 12 1541 100.7011/2 12 1543 125.57

2 12 1545 168.1121/2 12 1547 378.42

3 12 1549 509.75

FPM Seals

3/8 12 1532 52.221/2 12 1534 53.803/4 12 1536 63.02

1 12 1538 73.0311/4 12 1540 88.3711/2 12 1542 111.34

2 12 1544 151.6821/2 12 1546 346.35

3 12 1548 462.06


16 12 1513 44.5820 12 1515 46.4425 12 1517 53.4932 12 1519 62.2440 12 1522 75.5450 12 1524 94.3063 12 1526 128.0875 12 1528 308.0390 12 1530 397.94

110 12 2532 467.53


Praher Type S4 Check (Non Return) Valve

16 12 1502 44.5820 12 1503 46.4425 12 1504 53.4932 12 1505 62.2440 12 1506 75.5450 12 1507 94.3063 12 1508 128.0875 12 1509 308.0390 12 1510 397.94

110 12 2531 467.53

Description: In-line spring weighted cone check valveMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 16mm to 75mm - 10 bar;Sizes 90mm to 110mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: Polypropylene Seals: EPDM or FPMSpring: Stainless Steel sleeved in PTFEEnd Connections: Fusion sockets, fusion spigots or female BSP threaded

MM Fusion Sockets

BSP Female Threaded BSP Female Threaded


MM Fusion Sockets

Ball Float Valve

1/2 03500102 31.141 03500104 124.59

11/2 03500106 156.40

Description: Liquid level control valveMounting: In a horizontal positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-60˚CConstruction:Body: PolypropyleneArm: PolypropyleneFloat: PolypropyleneEnd Connections: BSP male threaded

1/2 HA/BVADJ/1PE/EP 40.111 HA/BVADJ/5PE/EP 141.56

11/2 HA/BVADJ/7PE/EP 171.06

Standard

Adjustable Cam

Standard Design

Adjustable Cam Design5 Different Positions


290

manual valves

EPDM Seals 11/4"/40 07 0191 117.4511/2"/50 07 0201 121.51

2"/63 07 0042 144.3321/2"/75 07 0052 146.22

3"/90 07 0062 168.114"/110 07 0072 211.105"/140 07 0082 249.416"/160 07 0092 314.298"/225 07 0102 577.77

10"/280 07 0112 805.2812"/315 07 0122 1028.8714"/355 07 0623 2400.1816"/450 07 0624 2864.5820"/560 07 0625 4787.86

11/4"/40 07 0193 202.5011/2"/50 07 0203 206.40

2"/63 07 0043 218.9021/2"/75 07 0053 220.47

3"/90 07 0063 263.494"/110 07 0073 310.395"/140 07 0083 365.136"/160 07 0093 437.038"/225 07 0103 646.56

10"/280 07 0113 955.3812"/315 07 0123 1258.74

FPM Seals

11/4"/40 07 0192 168.8611/2"/50 07 0205 173.59

2"/63 07 0041 203.2821/2"/75 07 0051 211.10

3"/90 07 0061 225.154"/110 07 0071 261.145"/140 07 0081 297.876"/160 07 0091 328.388"/225 07 0101 643.44

10"/280 07 0111 916.3012"/315 07 0121 1188.36


Praher Type S4 Wafer Check Valve

11/4"/40 07 0190 90.7011/2"/50 07 0200 94.94

2"/63 07 0040 126.9721/2"/75 07 0050 131.50

3"/90 07 0060 140.584"/110 07 0070 163.425"/140 07 0080 186.076"/160 07 0090 233.008"/225 07 0100 517.58

10"/280 07 0110 746.6612"/315 07 0120 958.5114"/355 07 0620 1857.6016"/450 07 0621 2112.4720"/560 07 0622 3455.67

Description: Wafer style flap check valveMounting: In any position, between flanges to BS 4504 EN1072, PN10.Optional spring return for mounting in horizontal position or for pulsating flow.Maximum Fluid Pressure at 20˚C: Sizes 40mm to 160mm - 10 bar; sizes 225mmto 500mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDM or FPMSpring: Stainless SteelEnd Connections: Flange mounted (flanges not included)

No Spring Return

Stainless Steel Spring Return Stainless Steel Spring Return

No Spring Return

11/4"/40 07 0467 22.9711/2"/50 07 0468 29.86

2"/63 07 0469 40.0321/2"/75 07 0470 47.86

3"/90 07 0471 81.014"/110 07 0472 121.025"/140 07 0473 182.946"/160 07 0474 328.388"/225 07 0475 805.28

10"/280 07 0476 1063.2812"/315 07 0477 1443.24

Installation Adaptor for Wafer Check ValveFlange mountingAllows the valve to open fullyWill accommodate use with heavy wall pipes

Occasionally the flange mounted wafer check valvewill have restricted opening if it is mounted in aheavy wall pipe. For all installations in heavy wallpipes we recommend the use of the additionalinstallation adaptor to ensure that the valve willopen fully.

Flange Mounted WaferCheck Valves

Note: backing ring not included.

i


291

manual valves

Praher Type S4 Line StrainerDescription: In-line strainer with union endsMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 16mm to 75mm - 10 bar;Sizes 90mm to 110mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDMStrainer: Polypropylene with 1.8mm mesh; Stainless Steel with 0.5mm,0.75mm or 1mm meshEnd Connections: Fusion sockets, fusion spigots

16 12 1711 44.4020 12 1712 44.4025 12 1713 53.4932 12 1714 62.2440 12 1715 75.5450 12 1716 94.3063 12 1717 128.0875 12 1718 337.7590 12 1719 419.06

110 12 1720 519.73

16 12 1725 44.4020 12 1726 44.4025 12 1727 53.4932 12 1728 62.2440 12 1729 75.5450 12 1730 94.3063 12 1731 128.0875 12 1732 337.7590 12 1733 419.06

110 12 1734 519.73

EPDM SealsPolypropylene Screen

EPDM SealsPolypropylene Screen

MM Fusion Sockets

16 12 5000 40.6620 12 5001 40.6625 12 5002 49.7332 12 5003 58.4940 12 5004 70.9850 12 5005 89.4363 12 5006 122.7675 12 5007 330.7290 12 5008 408.90

110 12 5009 506.32

EPDM Sealsno screen included

MM Fusion Sockets

16/3/8 50606 12.9520/1/2 50606 12.9525/3/4 50608 16.2632/1 50608 16.2640/11/4 50609 18.3550/11/2 50610 22.3863/2 50611 25.9075/21/2 50612 39.2590/3 50613 47.78110/4 50613 47.78

0.5mm mesh

16/3/8 50614 12.9520/1/2 50614 12.9525/3/4 50616 16.2632/1 50616 16.2640/11/4 50617 18.3550/11/2 50618 22.3863/2 50619 25.9075/21/2 50620 39.2590/3 50621 47.78110/4 50621 47.78

0.75mm mesh

16/3/8 50622 12.9520/1/2 50622 12.9525/3/4 50624 16.2632/1 50624 16.2640/11/4 50625 18.3550/11/2 50626 22.3863/2 50627 25.9075/21/2 50628 39.2590/3 50629 47.78110/4 50629 47.78

1mm mesh

Stainless Steel Screens*

MM Fusion Spigots

* Note: A filtersupport is required

for the stainless steelscreen

Filter Support for Stainless Steel Screen

16/3/8 14.1474 27.0120/1/2 14.1474 27.0125/3/4 14.1475 28.3032/1 14.1476 28.3040/11/4 14.1477 34.6250/11/2 14.1478 38.4763/2 14.1479 41.3375/21/2 14.1480 53.2490/3 14.1481 69.97110/4 14.1481 69.97

ASV Stubbe Gauge GuardDescription: Pressure gauge connector with isolatingdiaphragmMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneDiaphragm: PTFE (EPDM backed)End Connections: Fusion Spigots, NPT Female Threaded

25x1/4x1/4" 135534 93.1432x1/2x1/2" 135537 93.14

Note: gauge not included.


292

actuated valves

Praher Type S4 Electrically Actuated Ball Valve

110v acEPDM SealsPTFE Seats

16 12 1378 E2AG 589.6020 12 1379 E2AG 596.8325 12 1381 E2AG 608.9832 12 1383 E2AG 618.9340 12 1385 E2AG 640.1650 12 1387 E2AG 664.8563 12 1389 E2AG 697.9675 12 1391 E2AG 1112.3490 12 1393 E2AG 1290.70

110 12 2094 E2AG 1368.97

Description: In-line ball valve with electric actuatorMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes up to 63mm - 10 bar;75mm - 6 bar; 90mm - 5 bar; 110mm - 4 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDM or FPMSeats: PTFEEnd Connections: Fusion Sockets, Fusion Spigots, BSP Threaded,Flanged BS4504 EN1072 PN10Actuation:Housing Material: Plastic with epoxy coated aluminium baseVoltages: 240v AC; 110v AC; 24v AC; 110v DC; 24v DC; 12v DCFrequency Range: 50/60 HzProtection: IP65Manual Override: OptionalPosition Indicator: IncludedContacts: Open, closed. Additional contacts optional.

MM Fusion Sockets

110v acFPM Seals

PTFE Seats

16 12 1377 E2AG 602.6820 12 1412 E2AG 605.2425 12 1380 E2AG 619.2332 12 1382 E2AG 631.2740 12 1384 E2AG 654.3250 12 1386 E2AG 680.6463 12 1388 E2AG 716.7775 12 1390 E2AG 1149.2190 12 1392 E2AG 1345.64

110 12 2115 E2AG 1439.71

MM Fusion Sockets

Pneumatic Actuated Valve OptionsBody Material Options PriceTechnopolymer standardHard anodised aluminium free optionStainless steel on applicationDouble pack epoxy coated on applicationSwitchbox Options (with beacon)IP65 Technopolymer 2 x mechanical switches 91.84IP65 Technopolymer 2 x proximity switches EEXIA 359.26IP67 Polycarbonate 2 x V3 gold plated switches 124.26IP67 Polycarbonate 2 x V3 gold plated switches EEXIA 194.47IP67 Polycarbonate 2 x proximity switches EEXIA 310.63IP67 Aluminium 2 x V3 gold plated switches EEXD 324.14Solenoid Valve Options240v AC Solenoid 94.53110v AC Solenoid 94.5324v DC Solenoid 94.5324v AC Solenoid 94.53

Electric Actuated Valve OptionsSwitch Options PriceOpen/Closed includedOpen/Closed plus 2 x extra volt free 98.20Actuator OptionsReversible actuator with manual override standardUni-directional actuator without manual override on applicationCustomer specification actuator on applicationEEXD version actuator on applicationPower Options110v AC standard240v AC free option24v DC on application24v AC on applicationExtra OptionsHeater and thermostat on application4 - 20Ma positioner on applicationFail-Safe operation on application

Register online for our technical catalogue

Technical Resources

www.ipsflowsystems.com

Or call our technical team on:0800 975 79 71


293

actuated valves

Praher Type S4 Pneumatically Actuated Ball Valve

Fail-safe CloseEPDM SealsPTFE Seats

16 12 1377 P1A 321.8120 12 1412 P1A 323.9325 12 1380 P1A 337.7932 12 1382 P1A 349.1440 12 1384 P1A 404.0150 12 1386 P1A 430.3063 12 1388 P1A 533.3175 12 1390 P1A 797.9890 12 1392 P1A 1068.28

110 12 2115 P1A 1259.74

Fail-safe CloseFPM Seals

PTFE Seats


110 12 2094 P1A 1189.09

Fail-safe CloseEPDM SealsPTFE Seats


110 12 2509 P1A 1259.74


PTFE Seats


110 12 2508 P1A 1189.09

Double ActingEPDM SealsPTFE Seats


110 12 2115 P3A 1072.84

Double ActingFPM Seals

PTFE Seats


110 12 2094 P3A 1002.18

Double ActingEPDM SealsPTFE Seats


110 12 2509 P3A 1072.84


PTFE Seats


110 12 2508 P3A 1002.04Requires pilot valve - enquire for details.Also available with BSP female threaded connections, and with fail-safe open actuators. Please enquire for details.

Description: In-line ball valve with pneumatic operationMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes up to 75mm - 10 bar;Sizes 90mm and 110mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDM or FPMSeats: PTFEEnd Connections: Fusion Sockets, Fusion Spigots, BSP Threaded,Flanged BS4504 EN1072 PN10Actuation:Housing Material: Plastic (optional aluminium)Air Actuators: Fail-safe close, Fail-safe open, double actingProtection: IP65Manual Override: OptionalPosition Indicator: IncludedContacts: Optional limit switch box with two mechanical switchesPilot Valve: Solenoid, not included






294

actuated valves

Description: Wafer style butterfly valve with electric actuationMounting: In any position, between flanges to BS4504 EN1072 PN10Maximum Fluid Pressure at 20˚C: Sizes 3”/90mm to 5”/140mm - 10 bar;Sizes 6”/160mm to 8”/225mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDM or FPMShaft: Stainless Steel 304End Connections: Flange mounted (flanges not included)Actuation:Housing Material: Plastic with epoxy coated aluminium baseVoltages: 240v AC; 110v AC; 24v AC; 110v DC; 24v DC; 24v DC; 12v DCFrequency Range: 50/60 Hz Protection: IP65 Manual Override: OptionalPosition Indicator: Included Contacts: Open, closed. Additional contacts optional.

Praher Type S4 Electrically Actuated Butterfly Valve

110v acEPDM Seals

3”/90 12 1931 E2AG 1251.564”/110 12 1932 E2AG 1369.735”/140 12 2310 E2AG 1485.706”/160 12 1933 E2AG 2120.078”/225 12 1934 E2AG 2317.98

110v acFPM Seals

3”/90 12 1927 E2AG 1194.384”/110 12 1928 E2AG 1308.765”/140 12 2544 E2AG 1412.616”/160 12 1929 E2AG 2044.818”/225 12 1930 E2AG 2221.65

Description: Wafer style butterfly valve with pneumatic operationMounting: In any position, between flanges to BS4504 EN1072 PN10Maximum Fluid Pressure at 20˚C: Sizes 3”/90mm to 5”/140mm - 10 bar;Sizes 6”/160mm to 8”/225mm - 6 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDM or FPMShaft: Stainless Steel 304End Connections: Flange mounted (flanges not included)Actuation:Housing Material: AluminiumAir Actuators: Fail-safe close, fail-safe open, double actingProtection: IP65 Manual Override: Optional Position Indicator: IncludedContacts: Optional limit switch box with two mechanical switchesPilot Valve: Solenoid, not included

Praher Type S4 Pneumatically Actuated Butterfly Valve

Fail-safe CloseEPDM Seals

3”/90 12 1931 P1D 876.694”/110 12 1932 P1D 1027.095”/140 12 2310 P1D 1174.506”/160 12 1933 P1D 1484.458”/225 12 1934 P1D 1703.22


3”/90 12 1927 P1D 818.674”/110 12 1928 P1D 964.805”/140 12 2544 P1D 1087.886”/160 12 1929 P1D 1409.238”/225 12 1930 P1D 1605.99

Double ActingEPDM Seals

3”/90 12 1931 P3D 768.824”/110 12 1932 P3D 847.815”/140 12 2310 P3D 976.976”/160 12 1933 P3D 1159.298”/225 12 1934 P3D 1432.79


3”/90 12 1927 P3D 711.074”/110 12 1928 P3D 785.525”/140 12 2544 P3D 890.366”/160 12 1929 P3D 1050.658”/225 12 1930 P3D 1335.55

Fail-safe OpenEPDM Seals

3”/90 12 1931 P2D 876.694”/110 12 1932 P2D 1027.095”/140 12 2310 P2D 1174.506”/160 12 1933 P2D 1484.458”/225 12 1934 P2D 1703.22

Fail-safe OpenFPM Seals

3”/90 12 1927 P2D 818.974”/110 12 1928 P2D 964.805”/140 12 2544 P2D 1087.886”/160 12 1929 P2D 1409.238”/225 12 1930 P2D 1605.99

Requires pilot valve - enquire for details.


295

actuated valves

Description: In-line pneumatically operated diaphragm valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barFluid Temperature Range: 0˚C-80˚CConstruction:Body: PolypropyleneSeals: EPDM, FPM or PTFE (EPDM backed)End Connections: Fusion Spigots, Flanged BS4504 EN1072 PN10, Fusion Socket UnionsActuation:Housing Material: Glass reinforced polypropyleneAir Actuators: Fail-safe close, fail-safe openProtection: IP65Manual Override: IncludedPosition Indicator: IncludedContacts: OptionalPilot Valve: Solenoid, not included

Requires pilot valve - enquire for details.

Praher Type T4 Pneumatically Actuated Diaphragm Valve

Fail-safe CloseEPDM Diaphragm

20 12 5680 202.8425 12 5682 207.4132 12 5684 293.2340 12 5686 381.3650 12 5688 393.5363 12 5690 484.69

Fail-safe ClosePTFE Diaphragm

20 12 5679 192.9625 12 5681 197.5332 12 5683 280.3440 12 5685 347.2050 12 5687 347.2063 12 5689 432.27

Fail-safe OpenEPDM Diaphragm

20 12 5680 FSO 202.8425 12 5682 FSO 207.4132 12 5684 FSO 293.2340 12 5686 FSO 381.3650 12 5688 FSO 393.5363 12 5690 FSO 484.69

Fail-safe OpenPTFE Diaphragm


Fail-safe CloseEPDM Diaphragm

20 12 5723 235.5025 12 5725 240.0732 12 5727 313.0140 12 5729 398.0850 12 5731 437.5963 12 5733 532.54

Fail-safe ClosePTFE Diaphragm

20 12 5722 225.6525 12 5724 230.1832 12 5726 293.2340 12 5728 381.3650 12 5730 393.5363 12 5732 480.15

Fail-safe OpenEPDM Diaphragm


Fail-safe OpenPTFE Diaphragm


MM Fusion Spigots


Flanged PN10


Flanged PN10

MM Fusion Spigots


296

pressure reducing valves

The function of a pressure reducing valve

Applications for Pressure Reducing Valves

A pressure reducing valve is installed in-line. It is responsible for maintainingthe downstream line pressure to the pressure set at the valve.

The valve works by responding to changes in the downstream pressure. Forexample, assume that there are normally two open valves downstream fromthe pressure regulator. When one is closed, the back pressure will increase.As this happens, the pressure reducing valve would close down to maintainthe downstream pressure. When the valve is re-opened the pressure reducingvalve would also open up again until the set pressure was reached.

Under operating conditions the pressure reducing valve is always open whichmeans that it is balanced between the inlet pressure (primary side) and thelower outlet/working pressure. At any rise of working pressure at the valveoutlet a pressure compensation via the control bore takes place at the areabelow the diaphragm. The higher working pressure activates the largediaphragm and lifts the piston against the spring force. The flow reduces andthe working pressure drops until the balanced condition is reached again.When the working pressure drops this procedure is reversed. The spring forceopens the valve seat against the lower pressure force below the diaphragm. The flow rises until the balanced condition isreached again.

Pre-setting or re-adjustment of the valve set pressure is made by removing the protective cap and by setting the controlscrew. The counter nut is tightened after final adjustment. When used with neutral fluids, many of the pressure reliefvalves can be fitted with a pressure gauge if required.


297


16 1193 21 392.7720 1193 22 411.7525 1193 23 519.6232 1193 24 522.6640 1193 25 624.4850 1193 26 639.6563 1193 27 663.22

16 1193 14 384.3920 1193 15 386.6825 1193 16 506.7232 1193 17 511.2940 1193 18 602.4550 1193 19 615.3563 1193 20 637.39


ASV Stubbe Type 755 Pressure Reducing Valve

Description: In-line adjustable valve used to reduce system pressures and to keep theworking pressure constantMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barPressure Setting Range: 1 to 9 barHysteresis: Approx. 0.1 to 0.4 barFluid Temperature Range: 0˚C-70˚CConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Union fusion sockets or fusion spigotsFeatures: Adjustable at any time, even during use. Constant pressure control to± 0.2 bar. Vibration free during operation. Installation is independent of flow direction.Options: A pressure gauge can be fitted on the primary or also on the secondary side.

MM Union Fusion SocketsMM Union Fusion Sockets

16 1220 69 365.0320 1220 70 365.0325 1220 71 482.2832 1220 72 482.2840 1220 73 568.0550 1220 74 568.0563 1220 75 568.05

16 1220 62 359.3620 1220 63 359.3625 1220 64 475.7832 1220 65 475.7840 1220 66 557.9550 1220 67 557.9563 1220 68 557.95


MM Fusion SpigotsMM Fusion Spigots

Setting Range - 1 to 9 bar

Our expert team are here to help.Call our freephone:

Need advice?

0800 975 79 71Or from outside of the UK:+44 191 521 3111


298


16 1193 63 407.1920 1193 64 411.7525 1193 65 533.3132 1193 66 537.1140 1193 67 634.3650 1193 68 649.5463 1193 69 673.85

16 1193 56 400.3820 1193 57 401.8825 1193 58 521.1632 1193 59 524.9640 1193 60 613.0850 1193 61 626.7763 1193 62 648.77



Description: In-line adjustable valve used to reduce system pressures and to keep theworking pressure constantMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barPressure Setting Range: 0.5 to 9 barHysteresis: Approx. 0.1 to 0.4 barFluid Temperature Range: 0˚C-70˚CConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Union fusion sockets or fusion spigotsFeatures: Adjustable at any time, even during use. Constant pressure control to± 0.2 bar. Vibration free during operation. Installation is independent of flow direction.Options: A pressure gauge can be fitted on the primary or also on the secondary side.


16 1221 11 379.4320 1221 12 379.4325 1221 13 495.8032 1221 14 495.8040 1221 15 577.9950 1221 16 577.9963 1221 17 577.99

16 1221 04 374.4020 1221 05 374.4025 1221 06 489.4232 1221 07 489.4240 1221 08 568.6650 1221 09 568.6663 1221 10 568.66



Setting Range - 0.5 to 9 bar


299


EPDM Seals


75 1111 76 1750.1690 1111 77 4157.41

Description: In-line adjustable valve used to reduce system pressures and to keepthe working pressure constantMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barPressure Setting Range: 1 to 6 barHysteresis: Approx. 0.1 to 0.4 barFluid Temperature Range: 0˚C-70˚CConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Fusion spigotsFeatures: Adjustable at any time, even during use. Constant pressure control to± 0.2 bar. Installation is independent of flow direction.

MM Fusion Spigots

Setting Range - 1 to 6 bar

Give our expert team a call:

Don’t know how to use a product?

0800 975 79 71Or from outside of the UK: +44 191 521 3111


300

pressure relief valves

The function of a pressure relief valve

Applications for Pressure Relief Valves

A pressure relief valve is most often used to protect a system fromover-pressurisation, but it can also be used to maintain a constantupstream pressure or even as a non-return valve in certaininstallations.

Not normally installed as an in-line valve, it only opens when thesystem pressure exceeds the pressure set against the diaphragm ofthe valve. When this happens, the excess pressure forces the valvepiston off its seat, compressing the spring and allowing fluid to flowthrough the valve body to discharge. Damping at the valve pistonsuppresses vibration and fluttering.

The pre-formed diaphragm allows full opening of the valve whilstseparating the fluid in the lower body from the bonnet and thereforethe atmosphere. The seal is additionally secured by crimped seal O-rings at the diaphragm.

When the system pressure falls back to below the set pressure, thespring forces the piston back into the seat, closing the valve.

Pre-setting or re-adjustment of the valve set pressure is made byremoving the protective cap and by setting the control screw. Thecounter nut is tightened after final adjustment. When used with neutral fluids, many of the pressure reducing valves canbe fitted with a pressure gauge if required.


301


EPDM Seals 16 1206 81 208.1520 1206 82 212.7125 1206 83 295.5232 1206 84 300.0940 1206 85 388.2150 1206 86 403.4163 1206 87 430.75

16 1219 01 186.8820 1219 02 186.8825 1219 03 266.6432 1219 04 266.6440 1219 05 344.1550 1219 06 344.1563 1219 07 344.15

FPM Seals

16 1218 94 184.6220 1218 95 184.6225 1218 96 262.8532 1218 97 262.8540 1218 98 334.2850 1218 99 334.2863 1219 00 334.28


ASV Stubbe Type 712-R Pressure Relief and Non-Return Valve

16 1206 74 204.3620 1206 75 207.4125 1206 76 287.1632 1206 77 291.7440 1206 78 369.2150 1206 79 382.1463 1206 80 405.70

Description: Adjustable pressure relief and overflow valve, back-pressure safeMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barPressure Setting Range: 0.3 to 10 barOpening Pressure: Approx. 0.5 barHysteresis: Approx. 0.3 barFluid Temperature Range: 0˚C-70˚CConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Union fusion sockets or fusion spigotsFeatures: Unique design: valve acts as a non-return valve if there is no pressure onthe inlet side. Adjustable at any time, even during use. Vibration free during operation.Maintenance free. High reproducability, low hysteresis.Options: A pressure gauge can be fitted on the primary or also on the secondary side.

MM Union Fusion Sockets MM Union Fusion Sockets




302


16 1191 05 251.4820 1191 06 255.2725 1191 07 341.8532 1191 08 346.4240 1191 09 594.1050 1191 10 609.2663 1191 11 633.58

16 1190 98 247.6620 1190 99 250.7025 1191 00 332.7532 1191 01 337.3240 1191 02 575.8550 1191 03 586.4963 1191 04 607.76


ASV Stubbe Type 725 Pressure Relief Valve

Description: Adjustable pressure relief valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barPressure Setting Range: 0.2 to 10 barOpening Pressure: Approx. 0.2 barHysteresis: Approx. 0.3 barFluid Temperature Range: 0˚C-70˚CConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Union fusion sockets or fusion spigotsFeatures: Adjustable at any time, even during use. Vibration and flutter free duringoperation. Maintenance free. High reproducability, low hysteresis.Options: A pressure gauge can be fitted on the primary or also on the secondary side.


16 1220 27 226.5620 1220 28 226.5225 1220 29 308.6832 1220 30 308.6840 1220 31 538.7850 1220 32 538.7863 1220 33 538.78

16 1220 20 224.4120 1220 21 224.4125 1220 22 305.1232 1220 23 305.1240 1220 24 530.1650 1220 25 530.1663 1220 26 530.16




Don’t have the tools?We have a dedicated fleet ofwelding equipment available tohire on a weekly basis.

Machine Hire


303


16 1352 83 154.1220 1352 84 154.1225 1352 85 219.9332 1352 86 219.9340 1352 87 292.3150 1352 88 292.3163 1352 89 292.31

EPDM Seals

MM Fusion Spigots

Sizes 16-63mm

Setting Range0.3 to 4 bar



EPDM Seals 75 1129 21 1260.2790 1129 24 1994.74

110 1129 30 3022.97

FPM Seals


75 1105 46 1145.2290 1105 49 1777.90

110 1129 27 2748.33

Description: Adjustable pressure relief valveMounting: In any positionMaximum Fluid Pressure at 20˚C: Sizes 75mm & 90mm: 10 bar; 110mm: 6 barPressure Setting Range: Choice of 0.3 to 4 bar, 0.5 to 6 bar or 0.5 to 10 barOpening Pressure: Approx. 0.3 to 0.5 barHysteresis: Maximum approx. 1 barFluid Temperature Range: 0˚C-70˚CConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Fusion spigotsFeatures: Adjustable at any time, even during use. Vibration and flutter free duringoperation. Maintenance free.


EPDM Seals 110 1129 33 3022.97FPM Seals110 1118 57 2748.33


EPDM Seals 75 1129 12 1260.2790 1129 15 1994.74

FPM Seals75 1100 61 1145.2290 1100 64 1777.90



EPDM Seals 12 1278 42 136.59FPM Seals


12 1278 41 133.10

Description: Adjustable pressure relief valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barPressure Setting Range: 0.5 to 10 barOpening Pressure: Approx. 0.5 barFluid Temperature Range: 0˚C-70˚CFlow Rate: Up to 500 l/hrConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Union fusion socketsFeatures: Ideal for oscillating pumps. Adjustable at any time, even during use.Vibration and flutter free during operation. Diaphragm controlled, insensitive to back-pressure. Installation is independent of flow direction.

MM Union Fusion Sockets MM Union Fusion Sockets

Size 12mm

Ideal for

Oscillating

Pumps


304


16 1190 21 189.9120 1190 22 193.7325 1190 23 269.6932 1190 24 274.2640 1190 25 370.7350 1190 26 385.1763 1190 27 411.00

16 1190 14 186.1320 1190 15 188.4125 1190 16 261.3332 1190 17 265.1540 1190 18 351.7550 1190 19 363.8963 1190 20 385.94



Description: Adjustable pressure relief valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barPressure Setting Range: 0.2 to 4 barOpening Pressure: Approx. 0.2 barHysteresis: Approx. 0.3 barFluid Temperature Range: 0˚C-70˚CConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Union fusion sockets or fusion spigotsFeatures: Adjustable at any time, even during use. Vibration and flutter free duringoperation. Maintenance free. High reproducability, low hysteresis.Options: A pressure gauge can be fitted on the primary or also on the secondary side.


16 1219 43 166.4820 1219 44 166.4825 1219 45 237.9632 1219 46 237.9640 1219 47 320.8750 1219 48 320.8763 1219 49 320.87

16 1219 36 164.3820 1219 37 164.3825 1219 38 234.3732 1219 39 234.3740 1219 40 312.2450 1219 41 312.2463 1219 42 312.24




16 1382 98 196.6820 1382 99 200.7125 1383 00 279.4432 1383 01 284.16

16 1382 82 192.8320 1382 83 192.8325 1382 84 270.7632 1382 85 274.71


ASV Stubbe Type 715-SL Pressure Relief Valve

Description: Adjustable pressure relief valve with no metal fixings for aggressiveenvironmentsMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barPressure Setting Range: 0.2 to 4 barHysteresis: Approx. 0.3 barFluid Temperature Range: 0˚C-70˚CConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Union fusion sockets or fusion spigotsFeatures: Body is internally screwed together making this valve suitable for externallycorrosive environments. Adjustable at any time, even during use. Vibration and flutterfree during operation. Maintenance free. High reproducability, low hysteresis.Options: A pressure gauge can be fitted on the primary side or also on the secondaryside.


16 1383 02 172.4720 1383 03 172.4725 1383 04 246.5432 1383 05 246.54

16 1382 86 170.3020 1382 87 170.3025 1382 88 242.8332 1382 89 242.83





305


16 1190 63 189.9120 1190 64 193.7325 1190 65 269.6932 1190 66 274.2640 1190 67 370.7350 1190 68 385.1763 1190 69 411.00

16 1190 56 186.1320 1190 57 188.4125 1190 58 261.3332 1190 59 265.1540 1190 60 351.7550 1190 61 363.8963 1190 62 385.94



Description: Adjustable pressure relief valveMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barPressure Setting Range: 0.5 to 10 barOpening Pressure: Approx. 0.4 barHysteresis: Approx. 0.3 barFluid Temperature Range: 0˚C-70˚CConstruction:Body: Polypropylene Diaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Union fusion sockets or fusion spigotsFeatures: Adjustable at any time, even during use. Vibration and flutter free duringoperation. Maintenance free. High reproducability, low hysteresis.Options: A pressure gauge can be fitted on the primary or also on the secondary side.


16 1219 85 166.4820 1219 86 166.4825 1219 87 237.9632 1219 88 237.9640 1219 89 320.8750 1219 90 320.8763 1219 91 320.87

16 1219 78 164.3820 1219 79 164.3825 1219 80 234.3732 1219 81 234.3740 1219 82 312.2450 1219 83 312.2463 1219 84 312.24




16 1383 06 196.6820 1383 07 200.7125 1383 08 297.4432 1383 09 284.16

16 1382 90 192.8320 1382 91 192.8325 1382 92 270.7632 1382 93 274.71


ASV Stubbe Type 716-SL Pressure Relief Valve

Description: Adjustable pressure relief valve with no metal fixings for aggressiveenvironmentsMounting: In any positionMaximum Fluid Pressure at 20˚C: 10 barPressure Setting Range: 0.5 to 10 barHysteresis: Approx. 0.3 barFluid Temperature Range: 0˚C-70˚CConstruction:Body: PolypropyleneDiaphragm: EPDM with PTFE liner on fluid sideSeats and Seals: EPDM or FPMEnd Connections: Union fusion sockets or fusion spigotsFeatures: Body is internally screwed together making this valve suitable for externallycorrosive environments. Adjustable at any time, even during use. Vibration and flutterfree during operation. Maintenance free. High reproducability, low hysteresis.Options: A pressure gauge can be fitted on the primary side or also on the secondaryside.


16 1383 10 172.4720 1383 11 172.4725 1383 12 246.5432 1383 13 246.54

16 1382 94 170.3020 1382 95 170.3025 1382 96 242.8332 1382 97 242.83





polypropylene - IPS Flow · PDF file253 about: polypropylene Pressure ratings for...

Documents

Transcript of polypropylene - IPS Flow · PDF file253 about: polypropylene Pressure ratings for...