Polyolefin Manual and Catalogue - Marley Pipe Systems€¦ · Polyolefin Manual and Catalogue...

Polyolefin Manual and Catalogue

Solutions for Mining, Industrial and Infrastructure Applications

3

Y o u r V a l u e P a r t n e r

INDEX

FOREWORD POLYOLEFIN MANUAL................................................. 1. Product InformAtIon...................................................

1.1 Pipe Dimensions .................................................................. 1.2 Fabricated Fittings................................................................. 1.3 Moulded Fittings.................................................................... 1.4 Compression Fittings............................................................. 1.5 Magnum Saddles................................................................... 1.6 Electrofusion.......................................................................... 1.7 Weholite Pipe and Fittings..................................................... 1.8 Petroplas Pipe and Fittings...................................................

2. BuYErS................................................................................

3. EnGInEErS..........................................................................

3.1 Estimates............................................................................... 3.2 Pipe Design........................................................................... 3.3 Basic Calculations................................................................. 3.4 Selecting PE Pipe Systems................................................... 3.5 Properties of Chemical Resistance....................................... 3.6 Slurry Transportation............................................................. 3.7 Submerged Pipelines............................................................ 3.8 Polypropylene........................................................................ 3.9 On-Site Quality Management................................................ 3.10 Environment and Energy....................................................... 3.11 Designing with Weholite........................................................ 3.12 Petroplas...............................................................................

4. StAndArdS........................................................................

5. drAuGHtSmEn..................................................................

6. conStructIon..................................................................

6.1 Prerequisites.......................................................................... 6.2 Construction Guidelines and Stress Types............................ 6.3 Jointing................................................................................... 6.4 WeldingPolyolefins................................................................ 6.5 Jointing By Product................................................................ 6.6 Weholite Pipe Handling......................................................... 6.7 Petroplas Pipe Handling........................................................

7. dEtAILEd dESIGn..............................................................

7.1 Length Changes Due to Temperature and Pressure............. 7.2 Calculating Forces................................................................. 7.3 Elasticity Test......................................................................... 7.4 Calculating the Stresses....................................................... 7.5 Expansions............................................................................ 7.6 Estimating Service Life.......................................................... 7.7 Sample Calculation................................................................ 7.8 Miners Rule........................................................................... 7.9 Graphs................................................................................... 7.10 Applied Formulas and Abbreviations.....................................

8. LEArn morE......................................................................

9. ABout uS............................................................................

notES......................................................................................

dIScLAImEr............................................................................

04

05 - 111

06 - 0809 - 1516 - 6768 - 717273 - 100101 - 107108 - 111

112

113 - 171

114 - 122123 - 127128 - 140141 - 142143 - 150151 - 152153 - 155156 - 158159 - 160161162 - 168169 - 171

172

173

174 - 243

175 - 177178 - 199200 - 203203 - 212213 - 219220 - 231232 - 243

244 - 282

245 246 - 253253253 - 255256256256 - 259260 - 261262 - 280281 - 282

283 - 293

294 - 296

297-298

299


4

The technical advantages and commercial competitiveness of thermoplastic pipe systems has established them as a viable alternative to other materials. Thermoplastic pipe systems include PVC which Marley also manufacture and supply. However, this manual is dedicated to information on PE (PE100 polyethylene) and PP (polypropylene) polymers as manufactured or supplied by Marley Pipe Systems.

FOREWORD POLYOLEFIN MANUAL

This manual is intended to provide appropriate information for the complete supply chain in the thermoplastic pipe system industry in-cluding, inter alia, sales, purchasing, consulting, engineering, con-struction and draughting personnel; and, perhaps most important-ly, the client/owner body. Based on over 50 years experience with PE and PP pipe systems, Marley is able to present this manual to you. The process also included harvesting information from other companies in the Belgium based Aliaxis Group, of which Marley Pipe Systems is a member, resulting in a manual in which tables, diagrams, variables, guidelines and installation tips are partly re-printed and partly reformulated, always in compliance with all ap-plicable national and international standards, and also taking other guidelines and regulations applicable to pipe construction into ac-count.Wetrustthatthismanualfulfillsitsobjective.

This manual seeks to contribute to customer service and stan-dardise the use of plastic materials to make their applications generally understandable. The data contained in various chapters corresponds to the current state of our knowledge and is essential-ly based on standards involving plastics or pipe construction. Nev-ertheless, this manual is only of an informative nature, and its use does not entail any legal obligation; there are no claims concerning product qualities or their appropriateness for a specific require-ment.All liability fordeviations fromexistingstandards,deficien-cies or errors, as well as infringement of third party industrial rights is excluded. The responsibility of and warranties offered by users for proper planning and construction of thermoplastic components and facilities are not limited by the use of this manual.

Marley Pipe Systems guarantees the quality of its own products in accordance with its terms of delivery and sale. Reproduction and copying even of extracts of this manual may only be done with the written consent of Marley Pipe Systems.

Polyolefin Manual and Catalogue

Solutions for Mining, Industrial and Infrastructure Applications


5

1 PRODUct INFORMAtION

1. Product InformAtIon.......................

1.1 Pipe Dimensions ........................................... 1.2 Fabricated Fittings......................................... 1.3 Moulded Fittings............................................. 1.4 Compression Fittings..................................... 1.5 Magnum Saddles........................................... 1.6 Electrofusion.................................................. 1.7 Weholite Pipe and Fittings............................. 1.8 Petroplas Pipe and Fittings............................

05 - 111

06 - 0809 - 1516 - 6768 - 717273 - 100101 - 107108 - 111

6


PE100 - OD: WALL THICKNESS: MASS | SANS ISO 4427 SPECIFICATION | MATERIAL DENSITY 0.958 g/cm3

PE100 (8 MPa) ISO 4427 PN 4 PN 5 PN 6 PN 8 PN 10

Standard Dimension Ratio SDR 41 SDR 33 SDR 26 SDR 21 SDR 17

OD WALL THICKNESS WALL THICKNESS WALL THICKNESS WALL THICKNESS WALL THICKNESS

MIN AVE MAX MIN AVE MAX MASS MIN AVE MAX MASS MIN AVE MAX MASS MIN AVE MAX MASS MIN AVE MAX MASS

mm Marley mm mm Marley mm kg/m mm Marley mm kg/m mm Marley mm kg/m mm Marley mm kg/m mm Marley mm kg/m

16.0 16.15 16.3

20.0 20.15 20.3

25.0 25.15 25.3

32.0 32.15 32.3 2.0 2.15 2.3 0.194

40.0 40.20 40.4 2.0 2.15 2.3 0.246 2.4 2.60 2.8 0.294

50.0 50.20 50.4 2.0 2.15 2.3 0.311 2.4 2.60 2.8 0.372 3.0 3.20 3.4 0.453

63.0 63.20 63.4 2.5 2.70 2.9 0.492 3.0 3.20 3.4 0.578 3.8 4.05 4.3 0.721

75.0 75.25 75.5 2.9 3.10 3.3 0.673 3.6 3.85 4.1 0.827 4.5 4.80 5.1 1.018

90.0 90.30 90.6 3.5 3.75 4.0 0.977 4.3 4.60 4.9 1.186 5.4 5.75 6.1 1.463

110.0 110.35 110.7 4.2 4.50 4.8 1.434 5.3 5.65 6.0 1.780 6.6 7.00 7.4 2.177

125.0 125.40 125.8 4.8 5.10 5.4 1.847 6.0 6.35 6.7 2.275 7.4 7.85 8.3 2.777

140.0 140.45 140.9 5.4 5.75 6.1 2.331 6.7 7.10 7.5 2.849 8.3 8.80 9.3 3.487

160.0 160.50 161.0 6.2 6.60 7.0 3.057 7.7 8.15 8.6 3.737 9.5 10.05 10.6 4.551

180.0 180.55 181.1 6.9 7.30 7.7 3.806 8.6 9.10 9.6 4.696 10.7 11.30 11.9 5.756

200.0 200.60 201.2 7.7 8.15 8.6 4.721 9.6 10.15 10.7 5.818 11.9 12.55 13.2 7.103

225.0 225.70 226.4 8.6 9.10 9.6 5.932 10.8 11.40 12.0 7.353 13.4 14.15 14.9 9.009

PE100 (8 MPa) ISO 4427 PN 12.5 PN 16 PN 20 PN 25 PN 34

Standard Dimension Ratio SDR 13.6 SDR 11 SDR 9 SDR 7.4 SDR 6




16.0 16.15 16.3 2.0 2.15 2.3 0.091 2.3 2.50 2.7 0.103 3.0 3.20 3.4 0.125

20.0 20.15 20.3 2.0 2.15 2.3 0.116 2.3 2.50 2.7 0.133 3.0 3.20 3.4 0.163 3.4 3.65 3.9 0.181

25.0 25.15 25.3 2.0 2.15 2.3 0.149 2.3 2.50 2.7 0.170 3.0 3.20 3.4 0.211 3.5 3.75 4.0 0.242 4.2 4.40 4.6 0.275

32.0 32.15 32.3 2.4 2.60 2.8 0.231 3.0 3.20 3.4 0.279 3.6 3.85 4.1 0.328 4.4 4.70 5.0 0.388 5.4 5.75 6.1 0.457

40.0 40.20 40.4 3.0 3.25 3.5 0.361 3.7 3.95 4.2 0.431 4.5 4.80 5.1 0.511 5.5 5.85 6.2 0.605 6.7 7.10 7.5 0.707

50.0 50.20 50.4 3.7 3.95 4.2 0.550 4.6 4.90 5.2 0.668 5.6 5.95 6.3 0.792 6.9 7.30 7.7 0.943 8.3 8.80 9.3 1.096

63.0 63.20 63.4 4.7 5.00 5.3 0.876 5.8 6.15 6.5 1.056 7.1 7.55 8.0 1.265 8.6 9.10 9.6 1.482 10.5 11.10 11.7 1.741

75.0 75.25 75.5 5.6 5.95 6.3 1.241 6.8 7.20 7.6 1.475 8.4 8.90 9.4 1.777 10.3 10.90 11.5 2.111 12.5 13.20 13.9 2.465

90.0 90.30 90.6 6.7 7.10 7.5 1.778 8.2 8.70 9.2 2.137 10.1 10.70 11.3 2.563 12.3 13.00 13.7 3.024 15.0 15.85 16.7 3.551

110.0 110.35 110.7 8.1 8.60 9.1 2.634 10.0 10.55 11.1 3.169 12.3 13.00 13.7 3.809 15.1 15.95 16.8 4.532 18.3 19.30 20.3 5.289

125.0 125.40 125.8 9.2 9.75 10.3 3.394 11.4 12.05 12.7 4.111 14.0 14.80 15.6 4.926 17.1 18.05 19.0 5.832 20.8 21.90 23.0 6.822

140.0 140.45 140.9 10.3 10.90 11.5 4.250 12.7 13.40 14.1 5.124 15.7 16.55 17.4 6.171 19.2 20.25 21.3 7.326 23.3 24.55 25.8 8.563

160.0 160.50 161.0 11.8 12.45 13.1 5.547 14.6 15.40 16.2 6.725 17.9 18.85 19.8 8.036 21.9 23.05 24.2 9.535 26.6 28.00 29.4 11.166

180.0 180.55 181.1 13.3 14.05 14.8 7.041 16.4 17.30 18.2 8.500 20.1 21.20 22.3 10.167 24.6 25.90 27.2 12.055 29.9 31.45 33.0 14.113

200.0 200.60 201.2 14.7 15.50 16.3 8.635 18.2 19.20 20.2 10.482 22.4 23.60 24.8 12.572 27.4 28.85 30.3 14.913 33.2 34.95 36.7 17.424

225.0 225.70 226.4 16.6 17.50 18.4 10.966 20.5 21.60 22.7 13.268 25.2 26.55 27.9 15.913 30.8 32.40 34.0 18.849 37.4 39.35 41.3 22.069

1.1 PIPE dImEnSIonS Table 1.1 Pipe dimensions

1 PRODUct INFORMAtION - PIPE DIMENSIONS

7


SANS ISO 4427 SPECIFICATION | PE100 - OD: WALL THICKNESS: MASS

PE100 (8 MPa) ISO 4427 PN 4 PN 5 PN 6 PN 8 PN 10

Standard Dimension Ratio SDR 41 SDR 33 SDR 26 SDR 21 SDR 17




250.0 250.75 251.5 9.6 10.15 10.7 7.350 11.9 12.55 13.2 8.997 14.8 15.60 16.4 11.040

280.0 280.85 281.7 10.7 11.30 11.9 9.167 13.4 14.15 14.9 11.358 16.6 17.50 18.4 13.870

315.0 315.95 316.9 7.7 8.15 8.6 7.550 9.7 10.25 10.8 9.430 12.1 12.80 13.5 11.678 15.0 15.80 16.6 14.273 18.7 19.70 20.7 17.565

355.0 356.10 357.2 8.7 9.20 9.7 9.605 10.9 11.50 12.1 11.927 13.6 14.35 15.1 14.760 16.9 17.80 18.7 18.123 21.1 22.25 23.4 22.356

400.0 401.20 402.4 9.8 10.35 10.9 12.175 12.3 13.00 13.7 15.188 15.3 16.15 17.0 18.716 19.1 20.15 21.2 23.109 23.7 24.95 26.2 28.253

450.0 451.35 452.7 11.0 11.60 12.2 15.352 13.8 14.55 15.3 19.128 17.2 18.15 19.1 23.664 21.5 22.65 23.8 29.224 26.7 28.10 29.5 35.795

500.0 501.50 503.0 12.3 13.00 13.7 19.113 15.3 16.15 17.0 23.591 19.1 20.15 21.2 29.191 23.9 25.15 26.4 36.056 29.7 31.25 32.8 44.228

560.0 561.70 563.4 13.7 14.45 15.2 23.800 17.2 18.15 19.1 29.691 21.4 22.55 23.7 36.591 26.7 28.10 29.5 45.127 33.2 34.95 36.7 55.407

630.0 631.90 633.8 15.4 16.25 17.1 30.109 19.3 20.35 21.4 37.455 24.1 25.40 26.7 46.364 30.0 31.55 33.1 57.006 37.4 39.35 41.3 70.175

710.0 713.20 716.4 17.4 18.35 19.3 38.374 21.8 22.95 24.1 47.676 27.2 28.65 30.1 59.026 33.9 35.65 37.4 72.697 42.1 44.30 46.5 89.183

800.0 803.60 807.2 19.6 20.65 21.7 48.660 24.5 25.80 27.1 60.395 30.6 32.20 33.8 74.757 38.1 40.10 42.1 92.144 47.4 49.85 52.3 113.086

900.0 904.05 908.1 22.0 23.15 24.3 61.375 27.6 29.05 30.5 76.501 34.4 36.35 38.3 94.927 42.9 45.10 47.3 116.590 53.3 56.05 58.8 143.050

1000.0 1004.50 1009.0 24.5 25.80 27.1 75.995 30.6 32.05 33.5 93.802 38.2 40.20 42.2 116.668 47.7 50.15 52.6 144.043 59.3 62.35 65.4 176.796

PE100 (8 MPa) ISO 4427 PN 12.5 PN 16 PN 20 PN 25 PN 34

Standard Dimension Ratio SDR 13.6 SDR 11 SDR 9 SDR 7.4 SDR 6




250.0 250.75 251.5 18.4 19.40 20.4 13.508 22.7 23.90 25.1 16.317 27.9 29.35 30.8 19.557 34.2 36.00 37.8 23.268 41.5 43.65 45.8 27.207

280.0 280.85 281.7 20.6 21.70 22.8 16.925 25.4 26.75 28.1 20.457 31.3 32.95 34.6 24.584 38.3 40.30 42.3 29.176 46.5 48.90 51.3 34.136

315.0 315.95 316.9 23.2 24.45 25.7 21.450 28.6 30.10 31.6 25.895 35.2 37.05 38.9 31.099 43.1 45.35 47.6 36.933 52.3 55.00 57.7 43.195

355.0 356.10 357.2 26.1 27.50 28.9 27.197 32.2 33.90 35.6 32.873 39.7 41.75 43.8 39.499 48.5 51.00 53.5 46.830 59.0 62.00 65.0 54.878

400.0 401.20 402.4 29.4 30.95 32.5 34.488 36.3 38.20 40.1 41.734 44.7 47.00 49.3 50.103 54.7 57.50 60.3 59.479

450.0 451.35 452.7 33.1 34.85 36.6 43.685 40.9 43.00 45.1 52.846 50.3 52.90 55.5 63.437 61.5 64.65 67.8 75.242

500.0 501.50 503.0 36.8 38.70 40.6 53.904 45.4 47.75 50.1 65.209 55.8 58.65 61.5 78.170

560.0 561.70 563.4 41.2 43.35 45.5 67.628 50.8 53.40 56.0 81.691 62.5 65.70 68.9 98.076

630.0 631.90 633.8 46.3 48.70 51.1 85.479 57.2 60.15 63.1 103.504 70.3 73.90 77.5 124.106

710.0 713.20 716.4 52.2 54.90 57.6 108.771 64.5 67.80 71.1 131.696 79.3 83.35 87.4 158.000

800.0 803.60 807.2 58.8 61.80 64.8 137.972 72.6 76.30 80.0 167.014 89.3 93.85 98.4 200.472

900.0 904.05 908.1 66.2 69.60 73.0 174.793 81.7 85.85 90.0 211.405

1000.0 1004.50 1009.0 72.5 76.20 79.9 212.892 90.2 94.80 99.4 259.550

Table 1.1 Pipe dimensions (Continued)


8


Table 1.2 Coil dimensions

NOMINAL COIL SIZES PE100 (SABS 4427)

PIPE SIZE (mm)COIL DIMENSIONS

PIPE LENGTH (m)Outer Diameter (mm) Inner Diameter (mm) Width (mm)

16 780 700 300 100

20 850 700 300 100

25 950 700 300 100

32 820 750 300 30

32 1100 750 300 100

40 1250 1000 320 100

50 1550 1350 160 30

50 1950 1350 320 100

63 1860 1600 200 30

63 2100 1600 200 100

*75 2300 2000 250 30

*75 2300 2000 350 50

*90 2300 1940 300 30

*90 2300 1940 450 50

*90 2480 1940 450 75

*90 2600 1940 450 100

*110 2600 2160 350 30

*110 2600 2160 450 50

*Sizes 75mm up to 110mm in SDR26&21 are made to order because during manufacturing, temporary storage and transit, coils are prone to kinking due to the thin walls. We recommend that lengths 6, 9 and 12 metres be ordered for these Pressure Ratings. Tolerance on OD & ID is +/- 100mm


9


Table 1.4 Segmented tee and lateral (60° & 45°)

90° Equal Tee Lateral (60° - 45°)

DIAM-ETER

(d)

PLAIN ENDED FLANGED - FBE FLANGED - FBE

90° 45° 90° 45° 90° 45°

Z L Z1 Z2 L Z L Z1 Z2 L Z L Z1 Z2 L

50 150 300 200 150 400 200 400 250 200 500 - - - - -

63 150 300 200 150 400 200 400 250 200 500 200 400 250 200 500

75 400 800 475 370 950 450 900 525 420 1050 450 900 525 420 1050

90 400 800 475 370 950 450 900 525 420 1050 450 900 525 420 1050

110 400 800 475 370 950 450 900 525 420 1050 450 900 525 420 1050

125 400 800 475 370 950 450 900 525 420 1050 450 900 525 420 1050

140 400 800 475 370 950 450 900 525 420 1050 450 900 525 420 1050

160 400 800 475 370 950 450 900 725 420 1050 450 900 725 580 1050

180 450 900 875 530 1350 500 1000 725 580 1450 450 1000 725 580 1450

200 450 900 875 530 1350 500 1000 725 580 1450 500 1000 725 580 1450

225 450 900 875 530 1350 500 1000 725 580 1450 500 1000 725 580 1450

250 450 900 875 530 1350 500 1000 725 580 1450 500 1000 725 580 1450

280 650 1300 900 700 1800 700 1400 900 580 1800 700 1400 900 580 1800

315 650 1300 900 700 1800 700 1400 900 700 1800 700 1400 900 700 1800

355 650 1300 900 700 1800 700 1400 900 700 1800 - - - - -

400 650 1300 900 700 1800 700 1400 900 700 1800 - - - - -

450 850 1700 1100 870 2200 900 1800 1100 870 2200 - - - - -

500 850 1700 1100 870 2200 900 1800 1100 870 2200 - - - - -

560 900 1800 1200 950 2400 950 1900 1200 950 2400 - - - - -

630 900 1800 1200 950 2400 950 1900 1200 950 2400 - - - - -

710 1150 2300 1500 1200 3300 1200 2400 1500 1200 3000 - - - - -

800 1150 2300 1500 1200 3300 1200 2400 1500 1200 3000 - - - - -

900 1150 2300 2000 1600 4000 1600 3200 2000 1600 4000 - - - - -

1000 1150 2300 2000 1600 4000 1600 3200 2000 1600 4000 - - - - -All dimensions tabled in millimetres - mm.

Table 1.3 Segmented bend (90° & 45°)

90° Segmented Bend 45° Segmented Bend

DIAMETER (d)

RADIUS (r)

PLAIN ENDEDFLANGED FBE (Z) TAKSTUB TSBE (Z)

90° 45°

Z Z 90° 45° 90° 45°

50 75 220 220 265 265 - -

63 95 280 280 325 325 - -

75 113 330 330 375 375 - -

90 135 400 400 445 445 445 445

110 165 370 370 415 415 415 415

125 188 400 400 455 455 455 455

140 210 430 430 475 475 475 475

160 240 470 470 525 525 525 525

180 270 510 510 575 575 757 757

200 300 550 550 615 615 615 615

225 338 600 600 675 675 675 675

250 375 650 650 715 715 715 715

280 420 710 710 795 795 795 795

315 472 620 620 695 695 - -

355 532 680 680 755 755 - -

400 600 760 760 845 845 - -

450 675 1300 900 1385 985 - -

500 750 1400 900 1485 985 - -

560 840 1150 950 1240 1040 - -

630 945 1300 1100 1400 1200 - -

710 1065 1450 1250 1555 1355 - -

800 1200 1500 1300 1615 1415 - -

900 1350 1700 1500 1830 1630 - -

1000 1500 1800 1600 1940 1740 - -

All dimensions tabled in millimetres - mm

Pressure classes as defined in SANS 4427 and SANS ISO 4437

1.2 fABrIcAtEd fIttInGS

Fittings can be fabricated from pipe by butt welding in accordance with SANS 10268-1 Permissible working pressure is 60% of the nominal pressure of the pipe used to fabricate Bends and 50% for Tees and Laterals.

Note:Marleycansupplyfullypressureratedfittingswherede-ratingisnotrequired

1 PRODUct INFORMAtION - FAbRIcAtED FIttINgS

10


Table 1.5 Long radius bend (90° & 45°) – 3D, 2D and 1.5D

Table 1.6 Long radius bend (90° & 45°) – 3D only

Table 1.7 Long radius bend (90° & 45°) – 5D only

DIAMETER (d) RADIUS

PLAIN ENDEDFLANGED - FBE (L) TAKSTUB TSBE (L)

90° 45°( r ) L ( r ) L 90° 45° 90° 45°

50

3D

.50 220 150 220 265 265 - -63 .89 280 189 280 325 325 - -75 225 330 225 330 375 375 - -90 270 400 270 400 445 445 445 445110

2D

220 370 220 370 415 415 415 415125 250 400 250 400 455 455 455 455140 280 430 280 430 475 475 475 475160 320 470 320 470 525 525 525 525180 360 510 360 510 575 575 575 575200 400 550 400 550 615 615 615 615225 450 600 450 600 675 675 675 675250 500 650 500 650 715 715 715 715280 560 710 560 710 795 795 795 795315

1.5D427.5 620 427.5 620 695 695 - -

355 532.5 680 532.5 680 755 755 - -400 600 750 600 750 845 745 - -

All dimensions tabled in millimetres - mm.

DIAMETER (d) RADIUS


90° 45°( r ) L ( r ) L 90° 45° 90° 45°

110

3D

330 535 330 345 590 400 590 400125 375 580 375 360 645 425 645 425140 420 625 420 380 680 435 680 435160 480 685 480 405 750 470 750 470180 540 745 540 430 820 505 820 505200 600 705 600 455 870 520 870 520225 675 880 675 485 965 570 965 570250 750 955 750 515 1030 590 1030 590280 840 1045 840 555 1130 640 1130 640315 945 1150 945 585 1235 680 - -355 1065 1270 1065 645 1365 740 - -400 1200 1405 1200 705 1510 810 - -450 1350 1555 1350 765 1660 870 - -500 1500 1705 1500 830 1800 925 - -


DIAMETER (d) RADIUS


90° 45°( r ) L ( r ) L 90° 45° 90° 45°

110

5D

550 800 550 545 855 600 955 600125 625 875 625 620 940 685 940 685140 700 950 700 660 1005 715 1005 715160 800 1050 800 725 1115 790 1115 790180 900 1150 900 790 1225 865 1225 865200 1000 1250 1000 865 1315 930 1315 930225 1125 1375 1125 935 1460 990 1460 990250 1250 1500 1250 1015 1575 1090 1575 1090280 1400 1650 1400 1115 1735 1200 1735 1200315 1575 1825 1575 1215 1920 1310 - -355 1775 2025 1775 1355 2120 1450 - -400 2000 2250 2000 1505 2355 1610 - -450 2250 2500 2250 1665 2605 1770 - -500 2500 2750 2500 1830 2848 1928 - -


Note: The tolerance on all angles is -5°Larger diameter bends >500mm are available on request


11


Table 1.8 Stub flange detail fabricated from hollow-bar

Pipe OD mm D A D²PN 4-10 PN 12-20

B H B H

20 46 10 28 7 50 7 50

25 56 10 36 9 50 9 50

32 65 10 43 10 50 10 50

40 73 10 50 11 50 11 50

50 83 10 60 12 50 12 50

63 98 10 71 14 50 14 50

75 110 10 83 16 50 16 50

90 129 10 100 17 80 17 80

110 158 10 125 18 80 18 80

125 160 10 133 25 80 25 80

140 188 10 155 25 80 25 80

160 217 10 187 25 80 25 80

180 217 10 187 30 80 30 80

200 270 10 234 32 100 32 100

225 270 10 234 32 100 32 100

250 310 10 275 35 100 35 100

280 325 10 289 35 100 35 100

315 375 10 327 35 100 35 100

355 430 10 373 40 120 40 120

400 486 10 426 46 120 46 120

450 540 10 472 60 120 60 120

500 585 10 526 60 120 60 120

560 645 10 588 60 120 60 120

630 725 10 658 60 120 60 120

710 800 20 737 50 120 - -

800 905 18 840 52 120 - -

900 1005 15 944 55 120 - -

1000 1110 10 1047 60 140 - -

1200 1330 10 1245 60 140 - -


12


PIPE OD

BS 4504 10/3 - SABS 1123 1000/3 BS 4504 16/3 - SABS 1123 1600/3

DIMENSIONS BOLTS DIMENSIONS BOLTS

D d1 b PCD (k) Qty d2 P-P P-S D d1 b PCD (k) Qty d2 *A P-P *B P-S20 95 30 10 65 4 M12 65 50 95 30 10 65 4 M12 65 5025 105 38 10 75 4 M12 65 50 105 38 10 75 4 M12 65 5032 115 45 10 85 4 M12 65 50 115 45 10 85 4 M12 65 5040 140 52 10 100 4 M16 80 60 140 52 10 100 4 M16 80 6050 150 63 10 110 4 M16 80 60 150 63 10 110 4 M16 80 6063 165 74 12 125 4 M16 90 65 165 74 12 125 4 M16 90 6575 185 86 12 145 4 M16 90 65 185 86 12 145 4 M16 90 6590 200 103 12 160 8 M16 90 65 200 103 14 160 8 M16 90 65110 220 136 12 180 8 M16 100 70 220 136 14 180 8 M16 100 70125 220 136 12 180 8 M16 120 80 220 136 14 180 8 M16 120 80140 250 158 14 210 8 M16 120 90 250 158 16 210 8 M16 120 90160 285 190 16 240 8 M20 130 90 285 190 18 240 8 M20 130 90180 285 190 16 240 8 M20 140 100 285 190 18 240 8 M20 140 100200 340 237 18 295 8 M20 140 100 340 237 22 295 12 M20 150 100225 340 237 18 295 8 M20 150 110 340 237 22 295 12 M20 160 120250 395 279 18 350 12 M20 160 120 405 279 22 355 12 M24 170 120280 395 292 20 350 12 M20 160 120 405 292 25 355 12 M24 170 130315 445 330 22 400 12 M20 190 130 460 330 28 410 12 M24 190 140355 505 376 25 460 16 M20 190 140 520 376 30 470 16 M24 200 150400 565 430 25 515 16 M24 210 150 580 430 35 525 16 M24 240 170450 615 476 30 565 20 M24 240 160 640 476 40 585 20 M24 250 180500 670 533 30 620 20 M24 240 160

NOTE: The bolt diameters and length refer to flanges drilled to the above standard only - length of bolts allow for washers and gaskets.

*A P-P (Plastic to Plastic) *B P-S (Plastic to Steel)

560 730 592 35 675 20 M24 240 170630 835 662 36 780 20 M24 260 180710 895 737 40 840 24 M24 250 180800 1015 840 45 950 24 M30 280 210900 1115 942 50 1050 28 M30 310 2401000 1230 1045 55 1160 28 M30 340 250

PIPE OD

BS 10 Table D ASA 150

DIMENSIONS BOLTS DIMENSIONS BOLTS

D d1 b PCD (k) Qty d2 *A P-P *B P-S D d1 b PCD (k) Qty d2 *A P-P *B P-S20 95.3 30 5 66.7 4 M12 55 40 88.9 30 10 60.3 4 M12 65 5025 101.6 38 5 73 4 M12 55 40 98.4 38 10 69.8 4 M12 65 5032 114.3 45 5 82.6 4 M12 55 40 107.9 45 10 79.4 4 M12 65 5040 120.7 52 6 87.3 4 M12 75 60 117.5 52 12 88.9 4 M12 90 6550 133.4 63 6 98.4 4 M12 75 60 127 63 12 98.4 4 M16 90 6563 152.4 74 8 114.3 4 M16 80 55 152.4 74 12 120.6 4 M16 90 6575 165.1 86 8 127 4 M16 80 55 177.8 86 12 139.7 4 M16 90 6590 184.1 103 10 146 4 M16 80 60 190.5 103 12 152.4 4 M16 90 65110 215.9 136 10 177.8 4 M16 100 70 228.6 136 15 190.5 8 M16 110 80125 215.9 136 10 177.8 4 M16 110 75 228.6 136 15 190.5 8 M16 120 90140 254 158 13 209.6 8 M16 120 80 254 158 15 215.9 8 M20 120 90160 279.4 190 13 235 8 M16 120 90 279.4 190 20 241.3 8 M20 140 100180 279.4 190 13 235 8 M16 130 90 279.4 190 20 241.3 8 M20 150 110200 336.6 237 13 292.1 8 M16 130 90 342.9 237 20 298.4 8 M20 150 110225 336.6 237 13 292.1 8 M16 140 100 342.9 237 20 298.4 8 M20 160 110250 406.4 279 16 355.6 8 M20 150 110 406.4 279 25 361.9 12 M24 170 130280 406.4 292 16 355.6 8 M20 150 110 406.4 292 25 361.9 12 M24 170 130315 457.2 330 19 406.4 12 M20 180 130 482.6 330 30 431.8 12 M24 220 150355 527.1 376 22 469.9 12 M24 190 130 533.4 376 30 476.2 12 M24 200 150400 577.9 430 22 520.7 12 M24 210 140 596.9 430 30 539.7 16 M24 220 160450 641.4 476 25 584.2 12 M24 220 150 635 476 30 577.8 16 M30 240 160500 704 533 29 641.4 16 M24 240 160 698.5 533 30 635 20 M30 240 160

560/600 825.5 592 30 755.7 16 M24 240 160 812.8 592 35 749.3 20 M32 240 170630/650 825.5 662 32 755.7 16 M24 250 170 NOTE: The bolt diameters and length refer to flanges drilled to the above standard only - length of bolts allow for

washers and gaskets.

*A P-P (Plastic to Plastic) *B P-S (Plastic to Steel)

710 908.1 737 35 844.6 20 M24 240 170800 - - - - - - - -900 1174.7 942 48 1092.2 24 M32 310 2201000 1257.3 1045 51 1174.7 2 M32 330 240

Table 1.9 Flanges


13


OD

W

D

Pipe OD DType L4 Bar

W (mm)

Type H16 Bar

W (mm)

110 142 - 53

125 167 - 55

140 175 - 60

160 196 52.5 65

180 224 65 65

200 246 - 68

225 272 - 74

250 297 78 75

280 326 - 78

Table 1.10 Tak stub detail

Table 1.11 Tak clamp detail

TakFittingsareusedwithTakStubstoestablishdetachablejointsin HDPE pressure pipe systems. Stubs may be butt welded to pipe orspigotendsonbuttweldfittings.

TakClampsenabledetachable joints tobemadewithpipes thathave Tak Stubs butt welded to them.

Pipe OD A (mm) B (mm) C (mm)

110 165 212 86

125 186 237 80

140 198 245 95

160 215 272 104

180 246 300 105

200 278 322 111

225 293 348 108

250 322 373 118

280 354 402 122

B

OD

A

C


14


Victaulic fittings

Victualic Fittings are used with Victualic Stubs to establish detach-able joints in HDPE pressure pipe systems. Stubsmay be buttweldedtopipeorspigotendsonbuttweldfittings.VictaulicClampsenabledetachablejointstobemadewithpipesthathaveVictaulicStubs butt welded to them.

Table 1.12 Victaulic clamp detailB

C

DE

A

X

S

S

YZ

Nominal Size (mm)

A(mm)

B(mm)

C(mm)

D(mm)

E(mm)

X(mm)

Y(mm)

Z(mm)

Bolt Size

50 25 35 82.5 68 61 44.5 146 113 M12

80 25 35 110 96 90.5 63.5 186 146 M16

100 27 38 141.5 123 116 63.5 232 184 M16

150 27 38 194 176 167 89 279 232 M16

200 30 44 255.5 233 221 111 356 308 M20

250 30 44 314.5 287 275 111 410 365 M20

OD²

H

A

OD¹

B

OD³

R=2

Table 1.13 Victaulic stub detail

Pipe OD Vitaulic size OD¹ OD² OD³ A B H Clamp-

size

50 63 68.5 60 50.5 16 10 55 2”

63 90 97 90 61 16 15 55 3”

75 90 97 90 76 16 15 55 3”

90 110 124.5 115 91 16.5 15 55 4”

110 110 124.5 115 111 16.5 15 55 4”

125 160 178.5 161 126 17 15 55 6”

140 160 178.5 161 141 17 15 55 6”

160 160 178.5 161 161 17 15 55 6”

180 225 231.5 218 181 21 21 85 8”

200 225 231.5 218 201.5 21 21 85 8”

225 250 286 273 226.5 21 21 85 10”

250 250 286 273 251.5 21 21 85 10”


15


Table 1.14 Machined concentric and eccentric reducers for butt welding PE and PP

CONCENTRIC REDUCER

Size (D) Length (L)25 - 20 6032 - 20 6032 - 25 6040 - 20 6040 - 25 6040 - 32 6050 - 25 6050 - 32 6050 - 40 6063 - 25 6063 - 40 6063 - 50 6075 - 40 6075 - 50 6075 - 63 6090 - 50 6090 - 63 6090 - 75 60110 - 63 60110 - 75 60110 - 90 60125 - 75 100125 - 90 100125 - 110 100140 - 90 100140 - 110 100140 - 125 100160 - 110 100160 - 125 100160 - 140 100180 - 140 100180 - 160 100200 - 160 100200 - 180 100225 - 160 100225 - 180 100225 - 200 100250 - 200 100250 - 225 100280 - 225 100280 - 250 100315 - 250 100315 - 280 100355 - 280 120355 - 315 120400 - 315 120400 - 355 120450 - 355 120450 - 400 120500 - 400 120500 - 450 120560 - 500 120

(All dimensions tabled in millimetres - mm)

Large sizes available on request.

ECCENTRIC REDUCER

Size (D) Length (L)63 - 40 7063 - 50 7075 - 50 7075 - 63 7090 - 63 80 90 - 75 80110 - 75 80 110 - 90 80125 - 90 120125 - 110 120140 - 110 120140 - 125 100160 - 125 100160 - 140 100180 - 140 100180 - 160 100200 - 160 100200 - 180 100225 - 180 100225 - 200 100250 - 200 120250 - 225 100280 - 250 100315 - 280 100355 - 315 100400 - 355 120450 - 400 120500 - 450 120560 - 500 120


16


Table 1.15 Abbreviations

Art. Nr. Article number

DN Nominal size

de Outside diameter

e Wall thickness of a pipe

G Cylindrical pipe threads where pressure-tight joints are not made on the threads ISO 228

L Length of fitting

l Length of spigot

q Package quantity

R Male pipe threads where pressure-tight joints are made on the threads ISO 7

Rp Cylindrical female pipe threads where pressure-tight joints are made on the threads ISO 7

Rc Conical female pipe threads where pressure-tight joints are made on the threads ISO 7

SDR Ratio between outer diameter / wall thickness

EDPM Ethylene propylene diene monnomeR

FPM Viton

PVC Polyvinyl chloride

BSP British standard pipe

EN European standard

ISO International standard

DIN National standard in Germany

ASTM American standard

S Class indication ISO - S = SDR (1/2)

o.r. On request

1.3 mouLdEd fIttInGS tEcHnIcAL InformAtIon

Marley supplies a complete range of high density polyethylene (HDPE) butt weld and

spigot fittings for use exclusively with butt weld-ing. These fittings are often a preferred option for butt weld contractors as they are compact, easily stacked for simplified transportation and storage, and excellent for prefabricated pipe works.

Buttwelding isaveryeconomicaland reliable jointing techniqueformakingpermanentweldedjointsbywayofathermofusionpro-cess, requiring only butt welding equipment. The butt-fusion pro-cess involves the simultaneous heating of the ends of two compo-nentswhicharetobejoineduntilameltstateisattainedoneachcontact surface. The two surfaces are then brought together under controlledpressureforaspecificcoolingtimeandhomogeneousfusion is formed upon cooling. The resultant joint is resistant toend thrust and has comparable performance under pressure to the pipe.Bothfittingswithshortspigotendsandfittingswithlongspig-otendsaresuitableforbuttweldingandonlypipesandfittingsfromthe same wall thickness series can be butt welded together.

1.3.1 the marley System

Depending on the design and make, butt fusion machines may ormaynotbecapableofacceptingfittingsasmouldedfordirectweldingtopipes.Marleyofferstworangesoffittingsforbuttfusionsystemstoprovidethegreatestflexibility:

• Longspigotfittings• ‘Pupped’fittings

Puppedfittingsarefabricatedbybutt-fusing(inthefactory)0.5mlengthsofpipetoeachlegofaspigotfitting,therebyallowingthestraight length of pipe to be gripped by clamps of the butt-fusion machine. The Marley butt-fusion system, therefore, is comprised of:

• Straightpolyethylenepipe• Longspigotfittings• Puppedfittings• Accessories 1.3.2 Butt Welding machines

Marley can supply butt welding machines suitable for use in your fabrication workshop or on site

1 PRODUct INFORMAtION - MOULDED FIttINgS

17


Table 1.16 Stub flange short for butt welding | PE100 | SDR 33 | Water 3.2 bar

Table 1.17 Stub flange short for butt welding | PE100 | SDR 17 | Water 10 bar / gas 5 bar

de Art. Nr. q h l d1 d2 L

315 47 31 02 533 1 20 71 335 370 136

355 47 35 02 533 1 23 57 373 430 120

400 47 40 02 533 1 26 49 427 482 120

450 47 45 02 533 1 33 27 514 585 120

500 47 50 02 533 1 33 37 530 585 120

560 47 56 02 533 1 35 25 615 685 120

630 47 63 02 533 1 35 45 642 685 120

710 47 71 02 533* 1 35 35 737 800 120

800 47 80 02 533* 1 36 34 840 905 120

900 47 90 02 533* 1 40 30 944 1005 120

1000 47 91 02 533* 1 42 28 1047 1110 140

1200 47 92 02 533* 1 50 20 1245 1330 140

* fabrication on order, returning not possible | With grooved jointing face


40 47 04 02 517 30 11 24 50 78 50

50 47 05 02 517 25 12 21 61 88 50

63 47 06 02 517 15 14 16 75 102 50

75 47 07 02 517 10 16 14 89 122 50

90 47 09 02 517 5 17 33 105 138 80

110 47 11 02 517 5 18 27 125 158 80

125 47 12 02 517 5 18 42 132 158 80

140 47 14 02 517 4 18 34 155 188 80

160 47 16 02 517 4 18 34 175 212 80

180 47 18 02 517 3 20 60 182 212 80

200 47 20 02 517 2 24 36 232 268 100

225 47 22 02 517 2 24 46 235 268 100

250 47 25 02 517 1 25 35 285 320 100

280 47 28 02 517 1 25 45 291 320 100

315 47 31 02 517 1 25 35 335 370 100

355 47 35 02 517 1 30 30 373 430 120

400 47 40 02 517 1 33 42 427 482 120

450 47 45 02 517 1 46 14 514 585 120

500 47 50 02 517 1 46 24 530 585 120

560 47 56 02 517 1 50 10 615 685 120

630 47 63 02 517 1 50 30 642 685 120

710 47 71 02 517* 1 50 20 737 800 120

800 47 80 02 517* 1 52 18 840 905 120

900 47 90 02 517* 1 55 15 944 1005 120

1000 47 91 02 517* 1 60 10 1047 1110 140



18


Table 1.18 Stub flange short for butt welding | PE100 | SDR 11 | Water 16 bar / gas 10 bar

Table 1.19 Stub flange short for FIP butterfly valve type FE and FK for butt welding | PE100 | SDR 17 | Water 10 bar


20 47 01 02 511 50 7 30 27 45 50

25 47 02 02 511 30 9 26 33 58 50

32 47 03 02 511 30 10 25 40 68 50

40 47 04 02 511 30 11 24 50 78 50

50 47 05 02 511 25 12 21 61 88 50

63 47 06 02 511 15 14 16 75 102 50

75 47 07 02 511 10 16 14 89 122 50

90 47 09 02 511 5 17 33 105 138 80

110 47 11 02 511 5 18 27 125 158 80

125 47 12 02 511 5 25 25 132 158 80

140 47 14 02 511 4 25 27 155 188 80

160 47 16 02 511 4 25 34 175 212 80

180 47 18 02 511 3 30 60 182 212 80

200 47 20 02 511 2 32 36 232 268 100

225 47 22 02 511 2 32 46 235 268 100

250 47 25 02 511 1 35 35 285 320 100

280 47 28 02 511 1 35 45 291 320 100

315 47 31 02 511 1 35 35 335 370 100

355 47 35 02 511 1 40 30 373 430 120

400 47 40 02 511 1 46 42 427 482 120

450 47 45 02 511 1 60 14 514 585 120

500 47 50 02 511 1 60 24 530 585 120

560 47 56 02 511 1 60 10 615 685 120

630 47 63 02 511 1 60 30 642 685 120

710 47 71 02 511* 1 67 20 737 800 120


de/DN Art. Nr. q h l d1 d2 L

50/40 47 05 72 517 1 12 21 61 88 50

63/50 47 06 72 517 1 14 16 75 102 50

75/65 47 07 72 517 1 16 14 89 122 50

90/80 47 09 72 517 1 17 33 105 138 80

110/100 47 11 72 517 1 18 27 125 158 80

125/100 47 12 72 517 1 18 42 132 158 80

140/125 47 14 72 517 1 18 34 155 188 80

160/150 47 16 72 517 1 18 34 175 212 80

180/150 47 18 72 517 1 20 60 182 212 80

200/200 47 20 73 517* 1 24 36 232 268 100

225/200 47 22 72 517 1 24 46 235 268 100

250/250 47 25 73 517* 1 25 35 285 320 100

280/250 47 28 72 517 1 25 45 291 320 100

315/300 47 31 73 517 * 1 25 35 335 370 100

* machined for free movement of disc | With flat jointing face. Suitable for installation on both sides of the butterfly valve. Dimensions are adapted to the profile backing ring for stub flange.


19


Table 1.20 Tee 90° short for butt welding | PE100 | SDR 33 | Water 3.2 bar

de Art. Nr. q L Z l

315 39 31 01 533 1 530 263 75

355 39 35 01 533 1 658 330 95

400 39 40 01 533 1 690 345 104

450 39 45 01 533 1 890 450 130

500 39 50 01 533 1 895 450 130

Table 1.21 Tee 90° short for butt welding | PE100 | PE100 | Water 10 bar / gas 5 bar

de Art. Nr. q L Z l

40 39 04 01 517 10 88 44 16

50 39 05 01 517 10 116 58 21

63 39 06 01 517 10 146 73 24

75 39 07 01 517 10 170 85 28

90 39 09 01 517 10 200 100 23

110 39 11 01 517 5 240 120 43

125 39 12 01 517 5 250 125 26

140 39 14 01 517 4 280 140 32

160 39 16 01 517 2 320 160 40

180 39 18 01 517 1 390 195 73

200 39 20 01 517 1 430 215 64

225 39 22 01 517 1 490 245 72

250 39 25 01 517 1 550 275 86

280 39 28 01 517 1 620 310 105

315 39 31 01 517 1 700 350 111

355 39 35 01 517 1 680 340 101

400 39 40 01 517 1 680 338 95

450 39 45 01 517 1 900 450 130

500 39 50 01 517 1 900 450 130


20


Table 1.22 Tee 90° short for butt welding | PE100 | SDR 11 | Water 16 bar / gas 10 bar

de Art. Nr. q L Z l

20 39 01 01 511 30 50 25 8

25 39 02 01 511 30 60 30 10

32 39 03 01 511 20 80 40 12

40 39 04 01 511 10 88 44 16

50 39 05 01 511 10 116 58 21

63 39 06 01 511 10 146 73 24

75 39 07 01 511 10 170 85 28

90 39 09 01 511 10 200 100 23

110 39 11 01 511 5 240 120 43

125 39 12 01 511 5 250 125 26

140 39 14 01 511 4 280 140 32

160 39 16 01 511 2 320 160 40

180 39 18 01 511 1 390 195 73

200 39 20 01 511 1 430 215 64

225 39 22 01 511 1 490 245 72

250 39 25 01 511 1 550 275 86

280 39 28 01 511 1 620 310 105

315 39 31 01 511 1 700 350 111

355 39 35 01 511 1 680 340 101

400 39 40 01 511 1 680 338 95

450 39 45 01 511 1 900 450 130

500 39 50 01 511 1 900 450 130

Table 1.23 Tee 90° reduced short with reduced branch for butt welding | PE100 | SDR 17 | Water 10 bar / gas 5 bar

de1/de2 Art. Nr. q L Z l1 l290/32 28 09 03 517 10 213 85 53 23

90/50 28 09 05 517 10 214 93 53 28

110/32 28 11 03 517 5 244 94 66 22

110/50 28 11 05 517 5 238 103 66 27

110/63 28 11 06 517 5 240 105 48 32

110/90 28 11 09 517 5 240 115 48 38

125/63 28 12 06 517 5 264 110 70 31

125/90 28 12 09 517 5 265 124 72 32

140/63 28 14 06 517 4 300 120 83 32

140/75 28 14 07 517 4 300 130 81 35

140/90 28 14 09 517 4 300 130 81 41

140/110 28 14 11 517 4 300 137 50 47

160/110 28 16 11 517 2 320 145 56 38

160/125 28 16 12 517 2 315 150 58 47

180/63 28 18 06 517 1 358 134 125 30

180/75 28 18 07 517 1 360 140 112 30

180/110 28 18 11 517 1 365 158 106 48

180/125 28 18 12 517 1 358 160 92 50

200/63 28 20 06 517 1 382 145 143 31

200/125 28 20 12 517 1 390 165 114 43

200/160 28 20 16 517 1 390 165 98 60

225/110 28 22 11 517 1 440 264 89 89

225/125 28 22 12 517 1 445 180 135 40

225/160 28 22 16 517 1 470 200 89 60

250/110 28 25 11 517 1 455 197 135 38

250/160 28 25 16 517 1 455 219 110 58


21


Table 1.24 Tee 90° reduced short for butt welding with reduced branch | PE100 | SDR 11 | Water 16 bar / gas 10 bar

de1/de2 Art. Nr. q L Z l1 l290/32 28 09 03 511 10 213 85 53 23

90/50 28 09 05 511 10 213 90 53 28

110/32 28 11 03 511 5 244 94 66 22

110/50 28 11 05 511 5 244 103 66 27

110/63 28 11 06 511 5 240 105 48 32

110/90 28 11 09 511 5 240 115 48 38

125/63 28 12 06 511 5 278 112 70 31

125/90 28 12 09 511 5 265 124 72 32

140/63 28 14 06 511 4 305 120 83 32

140/75 28 14 07 511 4 305 130 81 35

140/90 28 14 09 511 4 305 130 81 41

140/110 28 14 11 511 4 305 140 50 47

160/110 28 16 11 511 2 320 145 56 38

160/125 28 16 12 511 2 325 150 58 47

180/63 28 18 06 511 1 358 134 125 30

180/75 28 18 07 511 1 352 140 112 30

180/110 28 18 11 511 1 365 158 106 48

180/125 28 18 12 511 1 366 166 92 50

200/63 28 20 06 511 1 382 145 143 31

200/125 28 20 12 511 1 390 165 114 43

200/160 28 20 16 511 1 390 180 98 60

225/110 28 22 11 511 1 440 264 89 88

225/125 28 22 12 511 1 456 178 135 40

225/160 28 22 16 511 1 470 200 89 60

250/110 28 25 11 511 1 463 197 135 38

250/160 28 25 16 511 1 458 219 110 58

250/160 28 25 16 517 1 455 219 110 58


22


Table 1.25 Tee 90° reduced machined short – pressure class conform with reduced branch for butt welding | PE100 | SDR 17 | Water 10 bar / gas 5 bar

de1/de2 Art. Nr. q L Z280/63 40 28 06 517 1 270 365280/75 40 28 07 517 1 280 365280/90 40 28 09 517 1 295 365280/110 40 28 11 517 1 315 365280/125 40 28 12 517 1 330 365280/140 40 28 14 517 1 345 365280/160 40 28 16 517 1 365 365280/180 40 28 18 517 1 385 365280/200 40 28 20 517 1 405 365280/225 40 28 22 517 1 430 365315/75 40 31 07 517 1 280 380315/90 40 31 09 517 1 295 380315/110 40 31 11 517 1 315 380315/125 40 31 12 517 1 330 380315/140 40 31 14 517 1 345 380315/160 40 31 16 517 1 365 380315/180 40 31 18 517 1 385 380315/200 40 31 20 517 1 405 380315/225 40 31 22 517 1 430 380315/250 40 31 25 517 1 455 380355/90 40 35 09 517 1 305 400355/110 40 35 11 517 1 325 400355/125 40 35 12 517 1 340 400355/140 40 35 14 517 1 355 400355/160 40 35 16 517 1 375 400355/180 40 35 18 517 1 395 400355/200 40 35 20 517 1 415 400355/225 40 35 22 517 1 440 400355/250 40 35 25 517 1 465 400355/280 40 35 28 517 1 500 400400/110 40 40 11 517 1 325 425400/125 40 40 12 517 1 340 425400/140 40 40 14 517 1 355 425400/160 40 40 16 517 1 375 425400/180 40 40 18 517 1 395 425400/200 40 40 20 517 1 415 425400/225 40 40 22 517 1 440 425400/250 40 40 25 517 1 465 425400/280 40 40 28 517 1 500 425400/315 40 40 31 517 1 535 425450/125 40 45 12 517 1 340 450450/140 40 45 14 517 1 355 450450/160 40 45 16 517 1 375 450450/180 40 45 18 517 1 395 450450/200 40 45 20 517 1 415 450450/225 40 45 22 517 1 440 450450/250 40 45 25 517 1 465 450450/280 40 45 28 517 1 500 450450/315 40 45 31 517 1 535 450450/355 40 45 35 517 1 575 450500/140 40 50 14 517 1 355 475500/160 40 50 16 517 1 375 475500/180 40 50 18 517 1 395 475500/200 40 50 20 517 1 415 475500/225 40 50 22 517 1 440 475500/250 40 50 25 517 1 465 475500/280 40 50 28 517 1 500 475500/315 40 50 31 517 1 535 475500/355 40 50 35 517 1 575 475500/400 40 50 40 517 1 620 475


23


de1/de2 Art. Nr. q L Z560/160 40 56 16 517 1 375 500560/180 40 56 18 517 1 395 500560/200 40 56 20 517 1 415 500560/225 40 56 22 517 1 440 500560/250 40 56 25 517 1 465 500560/280 40 56 28 517 1 500 500560/315 40 56 31 517 1 535 500560/400 40 56 40 517 1 620 500560/450 40 56 45 517 1 670 500560/560 40 56 56 517 1 780 500630/180 40 63 18 517 1 395 540630/200 40 63 20 517 1 415 540630/225 40 63 22 517 1 440 540630/250 40 63 25 517 1 465 540630/280 40 63 28 517 1 500 540630/315 40 63 31 517 1 535 540630/355 40 63 35 517 1 575 540630/400 40 63 40 517 1 620 540630/450 40 63 45 517 1 670 540630/500 40 63 50 517 1 720 540630/630 40 63 63 517 1 850 540710/180 40 71 18 517 1 395 620710/200 40 71 20 517 1 415 620710/225 40 71 22 517 1 440 620710/250 40 71 25 517 1 465 620710/280 40 71 28 517 1 500 620710/315 40 71 31 517 1 535 620710/355 40 71 35 517 1 575 620710/400 40 71 40 517 1 620 620710/450 40 71 45 517 1 670 620710/500 40 71 50 517 1 720 620710/560 40 71 56 517 1 780 620710/710 40 71 71 517 1 950 650

Pressure rating guaranteed, branch extended with pipe. Fabrication on order, returning not possible.

de1/de2 Art. Nr. q L Z280/63 40 28 06 511 1 270 365280/75 40 28 07 511 1 280 365280/90 40 28 09 511 1 295 365280/110 40 28 11 511 1 315 365280/125 40 28 12 511 1 330 365280/140 40 28 14 511 1 345 365280/160 40 28 16 511 1 365 365280/180 40 28 18 511 1 385 365280/200 40 28 20 511 1 405 365280/225 40 28 22 511 1 430 365315/75 40 31 07 511 1 280 380315/90 40 31 09 511 1 295 380315/110 40 31 11 511 1 315 380315/125 40 31 12 511 1 330 380315/140 40 31 14 511 1 345 380315/160 40 31 16 511 1 365 380315/180 40 31 18 511 1 385 380315/200 40 31 20 511 1 405 380315/225 40 31 22 511 1 430 380315/250 40 31 25 511 1 455 380355/90 40 35 09 511 1 305 400355/110 40 35 11 511 1 325 400355/125 40 35 12 511 1 340 400355/140 40 35 14 511 1 355 400355/160 40 35 16 511 1 375 400355/180 40 35 18 511 1 395 400

Table 1.25 Tee 90° reduced machined short – pressure class conform with reduced branch for butt welding | PE100 | SDR 17 | Water 10 bar / gas 5 bar (Continued)

Table 1.26 Tee 90° reduced machined short – pressure class conform with reduced branch for butt welding | PE100 | SDR 11 | Water 16 bar / gas 10 bar


24


355/200 40 35 20 511 1 415 400355/225 40 35 22 511 1 440 400355/250 40 35 25 511 1 465 400355/280 40 35 28 511 1 500 400400/110 40 40 11 511 1 325 425400/125 40 40 12 511 1 340 425400/140 40 40 14 511 1 355 425400/160 40 40 16 511 1 375 425400/180 40 40 18 511 1 395 425400/200 40 40 20 511 1 415 425400/225 40 40 22 511 1 440 425400/250 40 40 25 511 1 465 425400/280 40 40 28 511 1 500 425400/315 40 40 31 511 1 535 425450/125 40 45 12 511 1 340 450450/140 40 45 14 511 1 355 450450/160 40 45 16 511 1 375 450450/180 40 45 18 511 1 395 450450/200 40 45 20 511 1 415 450450/225 40 45 22 511 1 440 450450/250 40 45 25 511 1 465 450450/280 40 45 28 511 1 500 450450/315 40 45 31 511 1 535 450450/355 40 45 35 511 1 575 450500/140 40 50 14 511 1 355 475500/160 40 50 16 511 1 375 475500/180 40 50 18 511 1 395 475500/200 40 50 20 511 1 415 475500/225 40 50 22 511 1 440 475500/250 40 50 25 511 1 465 475500/280 40 50 28 511 1 500 475500/315 40 50 31 511 1 535 475500/355 40 50 35 511 1 575 475500/400 40 50 40 511 1 620 475560/160 40 56 16 511 1 375 500560/180 40 56 18 511 1 395 500560/200 40 56 20 511 1 415 500560/225 40 56 22 511 1 440 500560/250 40 56 25 511 1 465 500560/280 40 56 28 511 1 500 500560/315 40 56 31 511 1 535 500560/355 40 56 35 511 1 575 500560/400 40 56 40 511 1 620 500560/450 40 56 45 511 1 670 500560/560 40 56 56 511 1 780 500630/180 40 63 18 511 1 395 540630/200 40 63 20 511 1 415 540630/225 40 63 22 511 1 440 540630/250 40 63 25 511 1 465 540630/280 40 63 28 511 1 500 540630/315 40 63 31 511 1 535 540630/355 40 63 35 511 1 575 540630/400 40 63 40 511 1 620 540630/450 40 63 45 511 1 670 540630/500 40 63 50 511 1 720 540630/630 40 63 63 511 1 850 540710/180 40 71 18 511 1 395 620710/200 40 71 20 511 1 415 620710/225 40 71 22 511 1 440 620710/250 40 71 25 511 1 465 620710/280 40 71 28 511 1 500 620710/315 40 71 31 511 1 535 620710/355 40 71 35 511 1 575 620710/400 40 71 40 511 1 620 620710/450 40 71 45 511 1 670 620710/500 40 71 50 511 1 720 620710/560 40 71 56 511 1 780 620710/710 40 71 71 511 1 950 650

Pressure rating guaranteed, branch extended with pipe. Fabrication on order, returning not possible.

Table 1.26 Tee 90° reduced machined short – pressure class conform with reduced branch for butt welding | PE100 | SDR 11 | Water 16 bar / gas 10 bar (Continued)


25


Table 1.27 Bend 90° short for butt welding | PE100 | SDR 33 | Water 3.2 bar

Table 1.28 Bend 90° short for butt welding | PE100 | SDR 17 | Water 10 bar / gas 5 bar

Table 1.29 Bend 90° short for butt welding | PE100 | SDR 11 | Water 16 bar / gas 10 bar

de Art. Nr. q Z l R315 11 31 91 533 1 340 40 300355 11 35 91 533 1 340 40 300400 11 40 91 533 1 345 45 300450 11 45 91 533 1 450 50 400500 11 50 91 533 1 450 50 400

de Art. Nr. q Z l R40 11 04 91 517 50 51 7 4450 11 05 91 517 30 62 7 5563 11 06 91 517 15 77 8 6975 11 07 91 517 10 85 10 7590 11 09 91 517 10 100 10 90110 11 11 91 517 10 120 10 110125 11 12 91 517 5 140 15 125140 11 14 91 517 5 155 15 140160 11 16 91 517 5 175 15 160180 11 18 91 517 2 195 15 180200 11 20 91 517 1 215 15 200225 11 22 91 517 1 245 20 225250 11 25 91 517 1 275 25 250280 11 28 91 517 1 310 30 280315 11 31 91 517 1 350 35 315355 11 35 91 517 1 340 40 300400 11 40 91 517 1 350 50 300450 11 45 91 517 1 450 50 400500 11 50 91 517 1 450 50 400

de Art. Nr. q Z l R20 11 01 91 511 100 27 3 2425 11 02 91 511 80 32 5 2732 11 03 91 511 50 40 5 3540 11 04 91 511 50 51 7 4450 11 05 91 511 30 62 7 5563 11 06 91 511 15 77 8 6975 11 07 91 511 10 85 10 7590 11 09 91 511 10 100 10 90110 11 11 91 511 10 120 10 110125 11 12 91 511 5 140 15 125140 11 14 91 511 5 155 15 140160 11 16 91 511 5 175 15 160180 11 18 91 511 2 195 15 180200 11 20 91 511 1 215 15 200225 11 22 91 511 1 245 20 225250 11 25 91 511 1 275 25 250280 11 28 91 511 1 310 30 280315 11 31 91 511 1 350 35 315355 11 35 91 511 1 340 40 300400 11 40 91 511 1 350 50 300450 11 45 91 511 1 450 50 400500 11 50 91 511 1 450 50 400


26


Table 1.30 Reducer concentric DIN short for butt welding | PN100 | SDR 17 | Water 10 bar / gas 5 bar

de1/de2 Art. Nr. q L l1 l250/32 17 05 03 517 25 55 12 12

50/40 17 05 04 517 25 55 12 12

63/32 17 06 03 517 15 65 16 12

63/40 17 06 04 517 15 65 16 12

63/50 17 06 05 517 15 65 16 12

75/32 17 07 03 517 5 80 19 12

75/40 17 07 04 517 5 71 19 12

75/50 17 07 05 517 5 71 19 12

75/63 17 07 06 517 5 71 19 16

90/50 17 09 05 517 5 80 22 12

90/63 17 09 06 517 5 80 22 16

90/75 17 09 07 517 5 80 22 19

110/50 17 11 05 517 5 105 28 12

110/63 17 11 06 517 5 97 28 16

110/75 17 11 07 517 5 97 28 19

110/90 17 11 09 517 5 97 28 22

125/63 17 12 06 517 5 112 30 16

125/75 17 12 07 517 5 108 32 19

125/90 17 12 09 517 5 108 32 22

125/110 17 12 11 517 5 108 32 28

140/75 17 14 07 517 4 123 35 19

140/90 17 14 09 517 4 115 35 22

140/110 17 14 11 517 4 115 35 28

140/125 17 14 12 517 4 115 35 32

160/90 17 16 09 517 4 135 40 22

160/110 17 16 11 517 4 124 40 28

160/125 17 16 12 517 4 124 40 32

160/140 17 16 14 517 4 124 40 35

180/90 17 18 09 517 2 157 45 22

180/110 17 18 11 517 2 157 45 28

180/125 17 18 12 517 2 136 45 32

180/140 17 18 14 517 2 136 45 35

180/160 17 18 16 517 2 136 45 40

200/140 17 20 14 517 2 154 50 35

200/160 17 20 16 517 2 151 50 40

200/180 17 20 18 517 2 151 50 45

225/140 17 22 14 517 2 160 60 50

225/160 17 22 16 517 2 171 55 40

225/180 17 22 18 517 2 171 55 45

225/200 17 22 20 517 2 171 55 50

250/160 17 25 16 517 1 194 60 40

250/180 17 25 18 517 1 182 60 45

250/200 17 25 20 517 1 182 60 50

250/225 17 25 22 517 1 182 60 55

280/200 17 28 20 517* 1 200 85 70

280/225 17 28 22 517* 1 200 85 72

280/250 17 28 25 517* 1 200 85 80

315/200 17 31 20 517* 1 230 95 85

315/225 17 31 22 517* 1 230 95 88

315/250 17 31 25 517* 1 230 95 95

315/280 17 31 28 517* 1 230 95 107

* machined version


27


Table 1.31 Reducer concentric DIN short for butt welding | PN100 | SDR 11 | Water 16 bar / gas 10 bar

de1/de2 Art. Nr. q L l1 l225/20 17 02 01 511 30 37 12 12

32/20 17 03 01 511 30 43 12 12

32/25 17 03 02 511 30 43 12 12

40/20 17 04 01 511 25 50 12 12

40/25 17 04 02 511 25 50 12 12

40/32 17 04 03 511 25 50 12 12

50/25 17 05 02 511 25 55 12 12

50/32 17 05 03 511 25 55 12 12

50/40 17 05 04 511 25 55 12 12

63/32 17 06 03 511 15 65 16 12

63/40 17 06 04 511 15 65 16 12

63/50 17 06 05 511 15 65 16 12

75/32 17 07 03 511 5 80 19 12

75/40 17 07 04 511 5 71 19 12

75/50 17 07 05 511 5 71 19 12

75/63 17 07 06 511 5 71 19 16

90/50 17 09 05 511 5 80 22 12

90/63 17 09 06 511 5 80 22 16

90/75 17 09 07 511 5 80 22 19

110/50 17 11 05 511 5 105 28 12

110/63 17 11 06 511 5 97 28 16

110/75 17 11 07 511 5 97 28 19

110/90 17 11 09 511 5 97 28 22

125/63 17 12 06 511 5 112 30 16

125/75 17 12 07 511 5 108 32 19

125/90 17 12 09 511 5 108 32 22

125/110 17 12 11 511 5 108 32 28

140/75 17 14 07 511 4 123 35 19

140/90 17 14 09 511 4 115 35 22

140/110 17 14 11 511 4 115 35 28

140/125 17 14 12 511 4 115 35 32

160/90 17 16 09 511 4 135 40 22

160/110 17 16 11 511 4 124 40 28

160/125 17 16 12 511 4 124 40 32

160/140 17 16 14 511 4 124 40 35

180/90 17 18 09 511 2 157 45 22

180/110 17 18 11 511 2 157 45 28

180/125 17 18 12 511 2 136 45 32

180/140 17 18 14 511 2 136 45 35

180/160 17 18 16 511 2 136 45 40

200/140 17 20 14 511 2 154 50 35

200/160 17 20 16 511 2 151 50 40

200/180 17 20 18 511 2 151 50 45

225/140 17 22 14 511 2 160 60 50

225/160 17 22 16 511 2 171 55 40

225/180 17 22 18 511 2 171 55 45

225/200 17 22 20 511 2 171 55 50

250/160 17 25 16 511 1 194 60 40

250/180 17 25 18 511 1 182 60 45

250/200 17 25 20 511 1 182 60 50

250/225 17 25 22 511 1 182 60 55

280/200 17 28 20 511* 1 200 85 70

280/225 17 28 22 511* 1 200 85 72

280/250 17 28 25 511* 1 200 85 80

315/200 17 31 20 511* 1 230 95 85

315/225 17 31 22 511* 1 230 95 88

315/250 17 31 25 511* 1 230 95 95

315/280 17 31 28 511* 1 230 95 107

* machined version


28


Table 1.32 Reducer concentric short for butt welding | PE100 | SDR 33 | Water 3.2 bar

de1/de2 Art. Nr. q L l1 l2

355/315 15 35 31 533 1 110 53 40

400/225 15 40 22 533 1 160 64 40

400/250 15 40 25 533 1 150 61 40

400/280 15 40 28 533 1 140 60 40

400/315 15 40 31 533 1 120 50 40

400/355 15 40 35 533 1 110 51 40

450/280 15 45 28 533 1 160 65 40

450/315 15 45 31 533 1 140 55 40

450/355 15 45 35 533 1 130 57 40

450/400 15 45 40 533 1 120 60 40

500/280 15 50 28 533 1 180 80 40

500/315 15 50 31 533 1 170 71 40

500/355 15 50 35 533 1 150 62 40

500/400 15 50 40 533 1 140 65 40

500/450 15 50 45 533 1 120 60 40

560/355 15 56 35 533 1 170 75 40

560/400 15 56 40 533 1 160 68 40

560/450 15 56 45 533 1 140 62 40

560/500 15 56 50 533 1 130 67 40

630/355 15 63 35 533 1 200 80 40

630/400 15 63 40 533 1 190 78 40

630/450 15 63 45 533 1 170 72 40

630/500 15 63 50 533 1 150 67 40

630/560 15 63 56 533 1 130 64 40

710/500 15 71 50 533* 1 130 84 40

710/560 15 71 56 533* 1 170 81 40

710/630 15 71 63 533* 1 140 71 40

800/560 15 80 56 533* 1 200 85 40

800/630 15 80 63 533* 1 180 85 40

800/710 15 80 71 533* 1 150 78 40

900/630 15 90 63 533* 1 220 96 40

900/710 15 90 71 533* 1 190 89 40

900/800 15 90 80 533* 1 160 85 40

1000/710 15 91 71 533* 1 220 101 40

1000/800 15 91 80 533* 1 180 86 40

1000/900 15 91 90 533* 1 140 75 40

1200/1000 15 92 91 533* 1 190 92 40

* fabrication on order, returning not possible


29


Table 1.33 Reducer concentric short for butt welding | PE100 | SDR 17 | Water 10 bar / gas 5 bar


355/200 15 35 20 517 1 160 57 40

355/225 15 35 22 517 1 140 57 40

355/250 15 35 25 517 1 130 54 40

355/280 15 35 28 517 1 120 53 40

355/315 15 35 31 517 1 110 53 40

400/225 15 40 22 517 1 160 64 40

400/250 15 40 25 517 1 150 61 40

400/280 15 40 28 517 1 140 60 40

400/315 15 40 31 517 1 120 50 40

400/355 15 40 35 517 1 110 51 40

450/280 15 45 28 517 1 160 65 40

450/315 15 45 31 517 1 140 55 40

450/355 15 45 35 517 1 130 57 40

450/400 15 45 40 517 1 120 60 40

500/280 15 50 28 517 1 180 80 40

500/315 15 50 31 517 1 170 71 40

500/355 15 50 35 517 1 150 62 40

500/400 15 50 40 517 1 140 65 40

500/450 15 50 45 517 1 120 60 40

560/355 15 56 35 517 1 170 75 40

560/400 15 56 40 517 1 160 68 40

560/450 15 56 45 517 1 140 62 40

560/500 15 56 50 517 1 130 67 40

630/355 15 63 35 517 1 200 80 40

630/400 15 63 40 517 1 190 78 40

630/450 15 63 45 517 1 170 72 40

630/500 15 63 50 517 1 150 67 40

630/560 15 63 56 517 1 130 64 40

710/500 15 71 50 517* 1 130 84 40

710/560 15 71 56 517* 1 170 81 40

710/630 15 71 63 517* 1 140 71 40

800/560 15 80 56 517* 1 200 85 40

800/630 15 80 63 517* 1 180 85 40

800/710 15 80 71 517* 1 150 78 40

900/630 15 90 63 517* 1 220 96 40

900/710 15 90 71 517* 1 190 89 40

900/800 15 90 80 517* 1 160 85 40

1000/710 15 91 71 517* 1 220 101 40

1000/800 15 91 80 517* 1 180 86 40

1000/900 15 91 90 517* 1 140 75 40

* fabrication on order, returning not possible


30


Table 1.34 Reducer concentric short for butt welding | PE100 | SDR 11 | Water 16 bar / gas 10 bar


355/200 15 35 20 511 1 160 57 40

355/225 15 35 22 511 1 140 57 40

355/250 15 35 25 511 1 130 54 40

355/280 15 35 28 511 1 120 53 40

355/315 15 35 31 511 1 110 53 40

400/225 15 40 22 511 1 160 64 40

400/250 15 40 25 511 1 150 61 40

400/280 15 40 28 511 1 140 60 40

400/315 15 40 31 511 1 120 50 40

400/355 15 40 35 511 1 110 51 40

450/280 15 45 28 511 1 160 65 40

450/315 15 45 31 511 1 140 55 40

450/355 15 45 35 511 1 130 57 40

450/400 15 45 40 511 1 120 60 40

500/280 15 50 28 511 1 180 80 40

500/315 15 50 31 511 1 170 71 40

500/355 15 50 35 511 1 150 62 40

500/400 15 50 40 511 1 140 65 40

500/450 15 50 45 511 1 120 60 40

560/355 15 56 35 511 1 170 75 40

560/400 15 56 40 511 1 160 68 40

560/450 15 56 45 511 1 140 62 40

560/500 15 56 50 511 1 130 67 40

630/355 15 63 35 511 1 200 80 40

630/400 15 63 40 511 1 190 78 40

630/450 15 63 45 511 1 170 72 40

630/500 15 63 50 511 1 150 67 40

630/560 15 63 56 511 1 130 64 40


31


Table 1.35 Reducer eccentric short for butt welding | PE100 | SDR 17 | Water 10 bar / gas 5 bar

Table 1.36 Reducer eccentric short for butt welding | PE100 | SDR 11 | Water 16 bar / gas 10 bar

de1/de2 Art. Nr. q L l1 l 160/90 31 16 09 517 1 140 54 40160/110 31 16 11 517 1 120 45 40160/125 31 16 12 517 1 110 44 40160/140 31 16 14 517 1 90 33 40180/110 31 18 11 517 1 140 54 40180/125 31 18 12 517 1 130 52 40180/140 31 18 14 517 1 110 41 40180/160 31 18 16 517 1 90 33 40200/125 31 20 12 517 1 150 61 40200/140 31 20 14 517 1 130 50 40200/160 31 20 16 517 1 110 41 40200/180 31 20 18 517 1 100 43 40225/140 31 22 14 517 1 160 65 40225/160 31 22 16 517 1 140 57 40225/180 31 22 18 517 1 120 48 40225/200 31 22 20 517 1 100 40 40250/160 31 25 16 517 1 160 62 40250/180 31 25 18 517 1 140 54 40250/200 31 25 20 517 1 130 55 40250/225 31 25 22 517 1 100 40 40280/180 31 28 18 517 1 170 66 40280/200 31 28 20 517 1 150 58 40280/225 31 28 22 517 1 130 52 40280/250 31 28 25 517 1 110 47 40315/200 31 31 20 517 1 190 78 40315/225 31 31 22 517 1 160 62 40315/250 31 31 25 517 1 140 57 40315/280 31 31 28 517 1 120 54 40

Larger diameters on request.

de1/de2 Art. Nr. q L l1 l2160/90 31 16 09 511 1 140 54 40160/110 31 16 11 511 1 120 45 40160/125 31 16 12 511 1 110 44 40160/140 31 16 14 511 1 100 43 40180/110 31 18 11 511 1 140 54 40180/125 31 18 12 511 1 130 52 40180/140 31 18 14 511 1 120 51 40180/160 31 18 16 511 1 100 43 40200/125 31 20 12 511 1 150 61 40200/140 31 20 14 511 1 130 50 40200/160 31 20 16 511 1 120 51 40200/180 31 20 18 511 1 100 43 40225/140 31 22 14 511 1 160 65 40225/160 31 22 16 511 1 140 57 40225/180 31 22 18 511 1 120 48 40225/200 31 22 20 511 1 110 50 40250/160 31 25 16 511 1 170 72 40250/180 31 25 18 511 1 150 64 40250/200 31 25 20 511 1 130 55 40250/225 31 25 22 511 1 110 50 40280/180 31 28 18 511 1 180 76 40280/200 31 28 20 511 1 160 68 40280/225 31 28 22 511 1 140 62 40280/250 31 28 25 511 1 120 57 40315/200 31 31 20 511 1 190 78 40315/225 31 31 22 511 1 170 72 40315/250 31 31 25 511 1 150 67 40315/280 31 31 28 511 1 130 64 40

Larger diameters on request.


32


Table 1.37 End cap long / short for butt welding | PE100 | SDR 17 | Water 10 bar / gas 5 bar

Table 1.38 End cap long / short for butt welding | PE100 | SDR 11 | Water 16 bar / gas 10 bar

de Art. Nr. q L l

63 67 06 08 517* 1 85 62

75 67 07 08 517* 1 95 63

90 67 09 08 517* 1 110 79

110 67 11 08 517* 1 127 88

125 67 12 08 517* 1 124 95

140 67 14 08 517* 1 140 110

160 67 16 08 517* 1 152 121

180 67 18 08 517* 1 169 134

200 67 20 08 517* 1 184 140

225 67 22 08 517* 1 200 160

250 67 25 08 517* 1 230 152

280 67 28 08 517* 1 257 162

315 67 31 08 517* 1 262 167

355 67 35 08 517* 1 270 250

400 67 40 08 517* 1 275 250

450 67 45 09 517** 1 85 -

500 67 50 09 517** 1 90 -

560 67 56 09 517** 1 100 -

630 67 63 09 517** 1 110 -

710 67 71 09 517** 1 110 -

800 67 80 09 517** 1 120 -

*Long version **Short version, machined | Fabrication on order, returning not possible

de1/de2 Art. Nr. q L I

20 67 01 08 511* 1 45 35

25 67 02 08 511* 1 52 40

32 67 03 08 511* 1 58 44

40 67 04 08 511* 1 67 50

50 67 05 08 511* 1 75 55

63 67 06 08 511* 1 85 62

75 67 07 08 511* 1 95 63

90 67 09 08 511* 1 110 79

110 67 11 08 511* 1 127 88

125 67 12 08 511* 1 124 95

140 67 14 08 511* 1 140 110

160 67 16 08 511* 1 152 121

180 67 18 08 511* 1 169 134

200 67 20 08 511* 1 184 140

225 67 22 08 511* 1 200 160

250 67 25 08 511* 1 230 152

280 67 28 08 511* 1 257 162

315 67 31 08 511* 1 262 167

355 67 35 08 511* 1 280 250

400 67 40 08 511* 1 285 250

450 67 45 09 511** 1 95 -

500 67 50 09 511** 1 105 -

560 67 56 09 511** 1 115 -

630 67 63 09 511** 1 125 -

*Long version **Short version, machined | Fabrication on order, returning not possible


33


Table 1.39 Adaptor long with female thread for butt welding and electrofusion | PE100 | SDR 11 | Water 10 bar

Table 1.40 Adaptor long with male thread for butt welding and electrofusion | PE100 | SDR 11 | Water 10 bar

de1/de2 Art. Nr. q L I D SW

20/½” 93 01 78 511 50 65 40 39 32

25/½” 93 02 78 511 30 65 40 39 32

25/¾” 93 02 79 511 30 66 40 49 41

32/½” 93 03 78 511 30 69 44 39 32

32/¾” 93 03 79 511 30 70 44 49 41

32/1” 93 03 80 511 30 72 44 55 46

40/¾” 93 04 79 511 30 69 45 49 41

40/1” 93 04 80 511 30 76 49 55 46

40/1¼” 93 04 81 511 30 80 49 66 55

50/½” 93 05 78 511 25 76 55 50 32

50/1” 93 05 80 511 25 78 50 55 46

50/1¼” 93 05 81 511 25 85 55 66 55

50/1½” 93 05 82 511 25 86 55 83 70

63/2” 93 06 83 511 15 100 63 94 85

SW = size of the jaw.Thread according to EN 10226 (ISO 7).

For sealing we advise PTFE tape.Depending on assembly method and temperature change the maximum operating pressure can be reduced strongly.

de/R Art. Nr. q L l1 l2 SW

20/½” 95 01 78 511 50 58 19 37 24

25/¾” 95 02 79 511 30 61 14 40 27

32/1” 95 03 80 511 30 62 18 44 35

40/1¼” 95 04 81 511 30 75 19 49 46

50/1½” 95 05 82 511 25 82 20 55 55

63/2” 95 06 83 511 15 91 21 63 65

SW = size of the jaw.Thread according to EN 10226 (ISO 7).

For sealing we advise PTFE tape.


34


Table 1.41 Union complete short with EPDM O-ring for butt welding | PE100 | SDR 11 | Water 6 bar

Table 1.42 Union complete short with FPM O-ring for butt welding | PE100 | SDR 11 | Water 6 bar

Table 1.43 Union bush short for butt welding | PE100 | SDR 11

de Art. Nr. q L

20 43 01 06 511 10 110

25 43 02 06 511 10 110

32 43 03 06 511 10 110

40 43 04 06 511 10 110

50 43 05 06 511 10 110

63 43 06 06 511 5 110

75 43 07 06 511 1 110

90 43 09 06 511 1 180

110 43 11 06 511 1 180

Unions complete consist of:- PE union end and union bush

- PVC nut- EPDM O-ring

Depending on temperature change the maximum operating pressure can be reduced strongly.

de Art. Nr. q L

20 43 01 07 511 10 110

25 43 02 07 511 10 110

32 43 03 07 511 10 110

40 43 04 07 511 10 110

50 43 05 07 511 10 110

63 43 06 07 511 5 110

75 43 07 07 511 1 110

90 43 09 07 511 1 180

110 43 11 07 511 1 180


- PVC nut- FPM O-ring

Depending on temperature change the maximum operating pressure can be reduced strongly. Collectioning on order

de Art. Nr. q L l G

20 83 01 01 511 30 55 13 1”

25 83 02 01 511 30 55 13 1¼”

32 83 03 01 511 30 55 14 1½”

40 83 04 01 511 30 55 16 2”

50 83 05 01 511 25 55 18 2¼”

63 83 06 01 511 15 55 20 2¾”

75 83 07 01 511 5 55 24 3½”

90 83 09 01 511 5 90 25 4”

110 83 11 01 511 5 90 28 5”

Thread according to EN-ISO 228.


35


Table 1.44 Union end short for butt welding | PE100 | SDR 11

Table 1.45 Stub flange long for butt welding and electrofusion | PE100 | SDR 11 | Water 16 bar / gas 10 bar

de Art. Nr. q L h d1 d2

20 84 01 01 511 30 55 5 25 30

25 84 02 01 511 30 55 6 33.5 38.5

32 84 03 01 511 30 55 6 38 44.5

40 84 04 01 511 30 55 7 49.5 56.2

50 84 05 01 511 25 55 7 55 62.2

63 84 06 01 511 15 55 8 70 78.3

75 84 07 01 511 5 55 9 82.5 96.5

90 84 09 01 511 5 90 10 97.5 109.5

110 84 11 01 511 5 90 11 117.5 134.5


20 47 01 04 511 50 7 64 27 45 88

25 47 02 04 511 30 9 51 33 58 90

32 47 03 04 511 30 11 57 40 68 95

40 47 04 04 511 30 12 55 50 78 100

50 47 05 04 511 25 12 63 61 88 110

63 47 06 04 511 15 15 66 75 102 120

75 47 07 04 511 10 17 78 89 122 130

90 47 09 04 511 5 18 84 105 138 145

110 47 11 04 511 5 18 115 125 158 155

125 47 12 04 511 4 25 125 132 158 170

140 47 14 04 511 4 25 109 155 188 195

160 47 16 04 511 4 25 140 175 212 195

180 47 18 04 511 2 31 115 182 212 200

200 47 20 04 511 1 32 127 232 268 205

225 47 22 04 511 1 33 137 235 268 205

250 47 25 04 511 1 35 130 285 320 205

280 47 28 04 511 1 35 156 291 320 220

315 47 31 04 511 1 35 155 335 370 225

355 47 35 04 511 1 40 175 373 430 255

400 47 40 04 511 1 46 195 427 482 285

450 47 45 04 511* 1 60 280 514 585 400

500 47 50 04 511* 1 60 280 530 585 400

560 47 56 04 511* 1 60 280 615 685 400

630 47 63 04 511* 1 60 280 624 685 400

710 47 71 04 511* 1 67 280 737 800 400

*Machined and extended with pipe fabrication on order, returning not possible | With grooved jointing face.


36


Table 1.46 Stub flange long for butt welding and electrofusion | PE100 | SDR 17 | Water 10 bar / gas 5 bar


63 47 06 04 517 15 14 66 75 102 120

75 47 07 04 517 10 18 78 89 122 130

90 47 09 04 517 5 18 84 105 138 145

110 47 11 04 517 5 18 100 125 158 155

125 47 12 04 517 4 18 108 132 158 170

140 47 14 04 517 4 18 109 155 188 195

160 47 16 04 517 4 18 110 175 212 195

180 47 18 04 517 2 20 115 180 212 200

200 47 20 04 517 1 24 127 232 268 205

225 47 22 04 517 1 24 137 235 268 205

250 47 25 04 517 1 25 146 285 320 205

280 47 28 04 517 1 25 156 291 320 220

315 47 31 04 517 1 25 160 335 370 225

355 47 35 04 517 1 30 175 373 430 260

400 47 40 04 517 1 33 195 427 482 285

450 47 45 04 517* 1 46 280 519 585 400

500 47 50 04 517* 1 46 280 530 585 400

560 47 56 04 517* 1 50 280 615 685 400

630 47 63 04 517* 1 50 280 624 685 400

710 47 71 04 517* 1 50 280 737 800 400

800 47 80 04 517* 1 52 280 840 905 400

900 47 90 04 517* 1 55 280 944 1005 400

1000 47 91 04 517* 1 60 260 1047 1110 400

*Machined and extended with pipe fabrication on order, returning not possible | With grooved jointing face.

Table 1.47 Union complete long with EPDM O-ring for butt welding and electrofusion | PE100 | SDR 11 | Water 6 bar

de Art. Nr. q L

20 43 01 10 511 10 190

25 43 02 10 511 10 190

32 43 03 10 511 10 190

40 43 04 10 511 10 190

50 43 05 10 511 10 190

63 43 06 10 511 5 190

75 43 07 10 511 1 260

90 43 09 10 511 1 300

110 43 11 10 511 1 340


- PVC nut- EPDM O-ring

Depending on temperature change the maximum operating pressure can be reduced strongly.


37


Table 1.48 Union complete long with FPM O-ring for butt welding and electrofusion | PE100 | SDR 17 | Water 6 bar

Table 1.49 Union bush long for butt welding and electrofusion | PE100 | SDR 11

Table 1.50 Union end long for butt welding and electrofusion | PE100 | SDR 11

de Art. Nr. q L

20 43 01 11 511 10 190

25 43 02 11 511 10 190

32 43 03 11 511 10 190

40 43 04 11 511 10 190

50 43 05 11 511 10 190

63 43 06 11 511 5 190

75 43 07 11 511 1 260

90 43 09 11 511 1 300

110 43 11 11 511 1 340


- PVC nutFDM O-ring

Depending on temperature change the maximum operating pressure can be reduced strongly. Collectioning on order.

de Art. Nr. q L l G

20 83 01 05 511 30 95 13 1”

25 83 02 05 511 30 95 13 1¼”

32 83 03 05 511 30 95 14 1½”

40 83 04 05 511 30 95 16 2”

50 83 05 05 511 25 95 18 2¼”

63 83 06 05 511 15 95 20 2¾”

75 83 07 05 511 5 130 24 3½”

90 83 09 05 511 5 150 25 4”

110 83 11 05 511 5 170 28 5”


de Art. Nr. q L h d1 d2

20 84 01 05 511 30 95 5 25 30

25 84 02 05 511 30 95 6 33.5 38.5

32 84 03 05 511 30 95 6 38 44.5

40 84 04 05 511 30 95 7 49.5 56.2

50 84 05 05 511 25 95 7 55 62.2

63 84 06 05 511 15 95 8 70 78.3

75 84 07 05 511 5 130 9 82.5 96.5

90 84 09 05 511 5 150 10 97.5 109.5

110 84 11 05 511 5 170 11 117.5 134.5


38


Table 1.51 Union nut for PE union end | PVC

de Art. Nr. q D G d3 H

20 85 01 00 410 1 43 1” 27 24

25 85 02 00 410 1 53 1¼” 36 27

32 85 03 00 410 1 60 1½” 41 30

40 85 04 00 410 1 74 2” 53 32

50 85 05 00 410 1 80 2¼” 59 36

63 85 06 00 410 1 103 2¾” 74 39

75 85 07 00 410 1 122 3½” 83 43

90 85 09 00 410 1 139 4” 98 49

110 85 11 00 410 1 164 5” 118 55


Table 1.52 Tee 90° long for butt welding and electrofusion | PE100 | SDR 17 | Water 10 bar / gas 5 bar

de Art. Nr. q L Z l

63 39 06 05 517 1 228 114 70

75 39 07 05 517 1 240 120 73

90 39 09 05 517 1 306 153 86

110 39 11 05 517 1 336 168 95

125 39 12 05 517 1 354 177 100

140 39 14 05 517 1 386 193 105

160 39 16 05 517 1 450 225 124

180 39 18 05 517 1 466 233 119

200 39 20 05 517 1 502 251 127

225 39 22 05 517 1 554 272 138

250 39 25 05 517 1 628 314 148

280 39 28 05 517 1 692 346 160

315 39 31 05 517 1 760 380 170

355 39 35 05 517 1 820 410 165

400 39 40 05 517 1 915 460 195

450 39 45 05 517 1 970 485 195

500 39 50 05 517 1 1060 530 215


39


Table 1.53 Tee 90° for butt welding and electrofusion | PE100 | SDR 11 | Water 16 bar / gas 10 bar

de Art. Nr. q L Z l

20 39 01 05 511 1 107 54 35

25 39 02 05 511 1 124 62 41

32 39 03 05 511 1 150 75 51

40 39 04 05 511 1 164 82 55

50 39 05 05 511 1 166 83 51

63 39 06 05 511 1 228 114 70

75 39 07 05 511 1 240 120 73

90 39 09 05 511 1 306 153 86

110 39 11 05 511 1 336 168 95

125 39 12 05 511 1 354 177 100

140 39 14 05 511 1 386 193 105

160 39 16 05 511 1 450 225 124

180 39 18 05 511 1 466 233 119

200 39 20 05 511 1 502 251 127

225 39 22 05 511 1 554 272 138

250 39 25 05 511 1 628 314 148

280 39 28 05 511 1 692 346 160

315 39 31 05 511 1 760 380 170

355 39 35 05 511 1 820 410 165

400 39 40 05 511 1 915 460 195

450 39 45 05 511 1 970 485 195

500 39 50 05 511 1 1060 530 215


40


Table 1.54 Tee 90° reduced long with reduced branch for butt welding and electrofusion | PE100 | SDR 17 | Water 10 bar / gas 5 bar

de1/de2 Art. Nr. q L Z l1 l263/32 58 06 03 517 1 228 91 70 46

63/50 58 06 05 517 1 213 100 63 56

75/50 58 07 05 517 1 253 113 70 55

75/63 58 07 06 517 1 252 117 70 63

90/50 58 09 05 517 1 275 117 79 55

90/63 58 09 06 517 1 264 134 79 63

90/75 58 09 07 517 1 272 138 74 70

110/63 58 11 06 517 1 316 135 88 62

110/75 58 11 07 517 1 305 148 82 70

110/90 58 11 09 517 1 310 155 91 78

125/63 58 12 06 517 1 358 148 100 69

125/75 58 12 07 517 1 358 155 100 76

125/90 58 12 09 517 1 358 164 100 85

125/110 58 12 11 517 1 340 170 87 82

140/63 58 14 06 517 1 386 160 105 77

140/75 58 14 07 517 1 386 173 105 78

140/90 58 14 09 517 1 388 182 105 87

140/110 58 14 11 517 1 388 188 105 95

160/63 58 16 06 517 1 424 174 110 72

160/75 58 16 07 517 1 424 180 111 73

160/90 58 16 09 517 1 424 190 111 84

160/110 58 16 11 517 1 424 197 111 93

180/75 58 18 07 517 1 460 190 116 93

180/90 58 18 09 517 1 420 200 116 85

180/110 58 18 11 517 1 460 210 116 95

180/125 58 18 12 517 1 430 215 116 100

180/140 58 18 14 517 1 460 220 116 104

180/160 58 18 16 517 1 460 225 116 110

200/63 58 20 06 517 1 550 225 134 80

200/75 58 20 07 517 1 450 200 127 70

200/90 58 20 09 517 1 550 227 134 95

200/110 58 20 11 517 1 550 240 134 103

200/125 58 20 12 517 1 550 240 134 110

200/160 58 20 16 517 1 550 265 134 114

225/63 58 22 06 517 1 540 241 130 69

225/75 58 22 07 517 1 440 226 120 80

225/90 58 22 09 517 1 440 224 120 80

225/110 58 22 11 517 1 522 271 120 92

225/125 58 22 12 517 1 522 266 120 93

225/140 58 22 14 517 1 540 276 130 104

225/160 58 22 16 517 1 522 252 120 109

225/180 58 22 18 517 1 552 280 131 131

250/110 58 25 11 517 1 575 242 130 82

250/160 58 25 16 517 1 575 261 130 98

250/200 58 25 20 517 1 625 290 148 116

315/90 58 31 09 517 1 545 290 170 90

315/110 58 31 11 517 1 546 290 170 100

315/160 58 31 16 517 1 575 310 170 120

315/200 58 31 20 517 1 640 330 170 130

315/225 58 31 22 517 1 640 335 170 145

315/250 58 31 25 517 1 638 340 170 150


41


Table 1.55 Tee 90° reduced long with reduced branch for butt welding and electrofusion | PE100 | SDR 11 | Water 16 bar / gas 10 bar

de1/de2 Art. Nr. q L Z l1 l263/32 58 06 03 511 1 228 91 70 46

63/50 58 06 05 511 1 213 100 63 56

75/32 58 07 03 511 1 256 103 70 46

75/50 58 07 05 511 1 253 113 70 55

75/63 58 07 06 511 1 252 117 70 63

90/50 58 09 05 511 1 275 117 79 55

90/63 58 09 06 511 1 264 134 79 63

90/75 58 09 07 511 1 272 138 74 70

110/63 58 11 06 511 1 316 135 88 62

110/75 58 11 07 511 1 305 154 82 70

110/90 58 11 09 511 1 310 155 91 78

125/63 58 12 06 511 1 358 148 100 63

125/75 58 12 07 511 1 358 155 100 76

125/90 58 12 09 511 1 330 168 110 91

125/110 58 12 11 511 1 340 170 87 82

140/63 58 14 06 511 1 386 160 105 77

140/75 58 14 07 511 1 386 173 105 78

140/90 58 14 09 511 1 388 182 105 87

140/110 58 14 11 511 1 388 188 105 95

160/63 58 16 06 511 1 424 174 110 72

160/75 58 16 07 511 1 424 180 111 73

160/90 58 16 09 511 1 424 190 111 84

160/110 58 16 11 511 1 424 197 111 93

180/75 58 18 07 511 1 460 190 116 93

180/90 58 18 09 511 1 460 200 116 85

180/110 58 18 11 511 1 420 200 116 95

180/125 58 18 12 511 1 430 215 116 100

180/140 58 18 14 511 1 460 220 116 104

180/160 58 18 16 511 1 460 225 116 110

200/63 58 20 06 511 1 550 225 134 80

200/75 58 20 07 511 1 450 200 127 70

200/90 58 20 09 511 1 550 227 134 95

200/110 58 20 11 511 1 550 240 134 103

200/125 58 20 12 511 1 550 240 134 110

200/160 58 20 16 511 1 550 265 134 114

225/63 58 22 06 511 1 540 241 130 69

225/75 58 22 07 511 1 540 248 130 76

225/90 58 22 09 511 1 440 224 120 80

225/110 58 22 11 511 1 522 271 120 92

225/125 58 22 12 511 1 522 266 120 93

225/140 58 22 14 511 1 540 276 130 104

225/160 58 22 16 511 1 522 252 120 109

225/180 58 22 18 511 1 552 280 131 131

250/110 58 25 11 511 1 575 242 130 82

250/160 58 25 16 511 1 575 261 130 98

250/200 58 25 20 511 1 625 290 148 116

315/90 58 31 09 511 1 545 290 170 90

315/110 58 31 11 511 1 546 290 170 100

315/160 58 31 16 511 1 575 310 170 120

315/200 58 31 20 511 1 640 330 170 130

315/225 58 31 22 511 1 638 335 170 145

315/250 58 31 25 511 1 670 333 170 150


42


Table 1.56 Tee 90° reduced machined long – pressure class conform with reduced branch for butt welding and electrofusion | PE100 | SDR 17 | Water 10 bar / gas 5 bar

de1/de2 Art. Nr. q L Z

280/63 41 28 06 517 1 770 365

280/75 41 28 07 517 1 780 365

280/90 41 28 09 517 1 795 365

280/110 41 28 11 517 1 815 365

280/125 41 28 12 517 1 830 365

280/140 41 28 14 517 1 845 365

280/160 41 28 16 517 1 865 365

280/180 41 28 18 517 1 885 365

280/200 41 28 20 517 1 905 365

280/225 41 28 22 517 1 1 930 365

315/75 41 31 07 517 1 780 380

315/90 41 31 09 517 1 795 380

315/110 41 31 11 517 1 815 380

315/125 41 31 12 517 1 830 380

315/140 41 31 14 517 1 845 380

315/160 41 31 16 517 1 865 380

315/180 41 31 18 517 1 885 380

315/200 41 31 20 517 1 905 380

315/225 41 31 22 517 1 930 380

315/250 41 31 25 517 1 955 380

355/90 41 35 09 517 1 805 400

355/110 41 35 11 517 1 825 400

355/125 41 35 12 517 1 840 400

355/140 41 35 14 517 1 855 400

355/160 41 35 16 517 1 875 400

355/180 41 35 18 517 1 895 400

355/200 41 35 20 517 1 915 400

355/225 41 35 22 517 1 940 400

355/250 41 35 25 517 1 965 400

355/280 41 35 28 517 1 1000 400

400/110 41 40 11 517 1 825 425

400/125 41 40 12 517 1 840 425

400/140 41 40 14 517 1 855 425

400/160 41 40 16 517 1 875 425

400/180 41 40 18 517 1 895 425

400/200 41 40 20 517 1 915 425

400/225 41 40 22 517 1 940 425

400/250 41 40 25 517 1 965 425

400/280 41 40 28 517 1 1000 425

400/315 41 40 31 517 1 1035 425

450/125 41 45 12 517 1 840 450

450/140 41 45 14 517 1 855 450

450/160 41 45 16 517 1 875 450

450/180 41 45 18 517 1 895 450

450/200 41 45 20 517 1 915 450

450/225 41 45 22 517 1 940 450

450/250 41 45 25 517 1 965 450

450/280 41 45 28 517 1 1000 450

450/315 41 45 31 517 1 1035 450

450/355 41 45 35 517 1 1075 450

500/140 41 50 14 517 1 855 475

500/160 41 50 16 517 1 875 475

500/180 41 50 18 517 1 895 475

500/200 41 50 20 517 1 915 475

500/225 41 50 22 517 1 940 475

500/250 41 50 25 517 1 965 475


43


Table 1.56 Tee 90° reduced machined long – pressure class conform with reduced branch for butt welding and electrofusion | PE100 | SDR 17 | Water 10 bar / gas 5 bar (Continued)


500/280 41 50 28 517 1 1000 475

500/315 41 50 31 517 1 1035 475

500/355 41 50 35 517 1 1075 475

500/400 41 50 40 517 1 1120 475

560/160 41 56 16 517 1 875 500

560/180 41 56 18 517 1 895 500

560/200 41 56 20 517 1 915 500

560/225 41 56 22 517 1 940 500

560/250 41 56 25 517 1 965 500

560/280 41 56 28 517 1 1000 500

560/315 41 56 31 517 1 1035 500

560/355 41 56 35 517 1 1075 500

560/400 41 56 40 517 1 1120 500

560/450 41 56 45 517 1 1170 500

560/560 41 56 56 517 1 1280 500

630/180 41 63 18 517 1 895 540

630/200 41 63 20 517 1 915 540

630/225 41 63 22 517 1 940 540

630/250 41 63 25 517 1 965 540

630/280 41 63 28 517 1 1000 540

630/315 41 63 31 517 1 1035 540

630/355 41 63 35 517 1 1075 540

630/400 41 63 40 517 1 1120 540

630/450 41 63 45 517 1 1170 540

630/500 41 63 50 517 1 1220 540

630/630 41 63 63 517 1 1350 540

710/180 41 71 18 517 1 895 620

710/200 41 71 20 517 1 915 620

710/225 41 71 22 517 1 940 620

710/250 41 71 25 517 1 965 620

710/280 41 71 28 517 1 1000 620

710/315 41 71 31 517 1 1035 620

710/355 41 71 35 517 1 1075 620

710/400 41 71 40 517 1 1120 620

710/450 41 71 45 517 1 1170 620

710/500 41 71 50 517 1 1220 620

710/560 41 71 56 517 1 1280 620

710/710 41 71 71 517 1 1450 650


44




280/63 41 28 06 511 1 770 365

280/75 41 28 07 511 1 780 365

280/90 41 28 09 511 1 795 365

280/110 41 28 11 511 1 815 365

280/125 41 28 12 511 1 830 365

280/140 41 28 14 511 1 845 365

280/160 41 28 16 511 1 865 365

280/180 41 28 18 511 1 885 365

280/200 41 28 20 511 1 905 365

280/225 41 28 22 511 1 930 365

315/75 41 31 07 511 1 780 380

315/90 41 31 09 511 1 795 380

315/110 41 31 11 511 1 815 380

315/125 41 31 12 511 1 830 380

315/140 41 31 14 511 1 845 380

315/160 41 31 16 511 1 865 380

315/180 41 31 18 511 1 885 380

315/200 41 31 20 511 1 905 380

315/225 41 31 22 511 1 930 380

315/250 41 31 25 511 1 955 380

355/90 41 35 09 511 1 805 400

355/110 41 35 11 511 1 825 400

355/125 41 35 12 511 1 840 400

355/140 41 35 14 511 1 855 400

355/160 41 35 16 511 1 875 400

355/180 41 35 18 511 1 895 400

355/200 41 35 20 511 1 915 400

355/225 41 35 22 511 1 940 400

355/250 41 35 25 511 1 965 400

355/280 41 35 28 511 1 1000 400

400/110 41 40 11 511 1 825 425

400/125 41 40 12 511 1 840 425

400/140 41 40 14 511 1 855 425

400/160 41 40 16 511 1 875 425

400/180 41 40 18 511 1 895 425

400/200 41 40 20 511 1 915 425

400/225 41 40 22 511 1 940 425

400/250 41 40 25 511 1 965 425

400/280 41 40 28 511 1 1000 425

400/315 41 40 31 511 1 1035 425

450/125 41 45 12 511 1 840 450

450/140 41 45 14 511 1 855 450

450/160 41 45 16 511 1 875 450

450/180 41 45 18 511 1 895 450

450/200 41 45 20 511 1 915 450

450/225 41 45 22 511 1 940 450

450/250 41 45 25 511 1 965 450

450/280 41 45 28 511 1 1000 450

450/315 41 45 31 511 1 1035 450

450/355 41 45 35 511 1 1075 450

500/140 41 50 14 511 1 855 475

500/160 41 50 16 511 1 875 475

500/180 41 50 18 511 1 895 475

500/200 41 50 20 511 1 915 475

500/225 41 50 22 511 1 940 475

500/250 41 50 25 511 1 965 475


45


Table 1.57 Tee 90° reduced machined long – pressure class conform with reduced branch for butt welding and electrofusion | PE100 | SDR 11 | Water 16 bar / gas 10 bar (Continued)


500/280 41 50 28 511 1 1000 475

500/315 41 50 31 511 1 1035 475

500/355 41 50 35 511 1 1075 475

500/400 41 50 40 511 1 1120 475

560/160 41 56 16 511 1 875 500

560/180 41 56 18 511 1 895 500

560/200 41 56 20 511 1 915 500

560/225 41 56 22 511 1 940 500

560/250 41 56 25 511 1 965 500

560/280 41 56 28 511 1 1000 500

560/315 41 56 31 511 1 1035 500

560/355 41 56 35 511 1 1075 500

560/400 41 56 40 511 1 1120 500

560/450 41 56 45 511 1 1170 500

560/560 41 56 56 511 1 1280 500

630/180 41 63 18 511 1 895 540

630/200 41 63 20 511 1 915 540

630/225 41 63 22 511 1 940 540

630/250 41 63 25 511 1 965 540

630/280 41 63 28 511 1 1000 540

630/315 41 63 31 511 1 1035 540

630/355 41 63 35 511 1 1075 540

630/400 41 63 40 511 1 1120 540

630/450 41 63 45 511 1 1170 540

630/500 41 63 50 511 1 1220 540

630/630 41 63 63 511 1 1350 540

710/180 41 71 18 511 1 895 620

710/200 41 71 20 511 1 915 620

710/225 41 71 22 511 1 940 620

710/250 41 71 25 511 1 965 620

710/280 41 71 28 511 1 1000 620

710/315 41 71 31 511 1 1035 620

710/355 41 71 35 511 1 1075 620

710/400 41 71 40 511 1 1120 620

710/450 41 71 45 511 1 1170 620

710/500 41 71 50 511 1 1220 620

710/560 41 71 56 511 1 1280 620

710/710 41 71 71 511 1 1450 650


46



de1/de2 Art. Nr. q L Z125/63 42 12 06 517 1 580 350125/75 42 12 07 517 1 580 350125/90 42 12 09 517 1 580 350125/110 42 12 11 517 1 580 350125/125 42 12 12 517 1 580 350140/75 42 14 07 517 1 600 370140/90 42 14 09 517 1 600 370140/110 42 14 11 517 1 600 370140/125 42 14 12 517 1 600 370140/140 42 14 14 517 1 600 370160/90 42 16 09 517 1 540 420160/110 42 16 11 517 1 540 420160/125 42 16 12 517 1 540 420160/140 42 16 14 517 1 540 420180/110 42 18 11 517 1 660 420180/125 42 18 12 517 1 660 420180/140 42 18 14 517 1 660 420180/160 42 18 16 517 1 660 420180/180 42 18 18 517 1 660 420200/110 42 20 11 517 1 790 490200/125 42 20 12 517 1 790 490200/140 42 20 14 517 1 790 490200/160 42 20 16 517 1 790 490200/180 42 20 18 517 1 790 490200/200 42 20 20 517 1 790 490225/110 42 22 11 517 1 702 540225/125 42 22 12 517 1 702 540225/140 42 22 14 517 1 702 540225/160 42 22 16 517 1 702 540225/180 42 22 18 517 1 702 540225/200 42 22 20 517 1 702 540250/110 42 25 11 517 1 960 580250/125 42 25 12 517 1 960 580250/140 42 25 14 517 1 960 580250/160 42 25 16 517 1 960 580250/180 42 25 18 517 1 960 580250/200 42 25 20 517 1 960 580250/225 42 25 22 517 1 960 580250/250 42 25 25 517 1 960 580280/160 42 28 16 517 1 1000 640280/180 42 28 18 517 1 1000 640280/200 42 28 20 517 1 1000 640280/225 42 28 22 517 1 1000 640280/250 42 28 25 517 1 1000 640280/280 42 28 28 517 1 1000 640315/160 42 31 16 517 1 1150 730315/180 42 31 18 517 1 1150 730315/200 42 31 20 517 1 1150 730315/225 42 31 22 517 1 1150 730315/250 42 31 25 517 1 1150 730315/280 42 31 28 517 1 1150 730315/315 42 31 31 517 1 1150 730355/200 42 35 20 517 1 1210 780355/225 42 35 22 517 1 1210 780355/250 42 35 25 517 1 1210 780355/280 42 35 28 517 1 1210 780355/315 42 35 31 517 1 1210 780355/355 42 35 35 517 1 1210 780400/200 42 40 20 517 1 1270 840400/225 42 40 22 517 1 1270 840400/250 42 40 25 517 1 1270 840400/280 42 40 28 517 1 1270 840400/315 42 40 31 517 1 1270 840400/355 42 40 35 517 1 1270 840400/400 42 40 40 517 1 1270 840450/250 42 45 25 517 1 1340 900450/280 42 45 28 517 1 1340 900450/315 42 45 31 517 1 1340 900450/355 42 45 35 517 1 1340 900450/400 42 45 40 517 1 1340 900450/450 42 45 45 517 1 1340 900500/500 42 50 50 517 1 1410 960560/560 42 56 56 517 1 1500 1030630/630 42 63 63 517 1 1600 1110


47



de1/de2 Art. Nr. q L Z125/63 42 12 06 511 1 580 350125/75 42 12 07 511 1 580 350125/90 42 12 09 511 1 580 350125/110 42 12 11 511 1 580 350125/125 42 12 12 511 1 580 350140/75 42 14 07 511 1 600 370140/90 42 14 09 511 1 600 370140/110 42 14 11 511 1 600 370140/125 42 14 12 511 1 600 370140/140 42 14 14 511 1 600 370160/90 42 16 09 511 1 540 420160/110 42 16 11 511 1 540 420160/125 42 16 12 511 1 540 420160/140 42 16 14 511 1 540 420180/110 42 18 11 511 1 660 420180/125 42 18 12 511 1 660 420180/140 42 18 14 511 1 660 420180/160 42 18 16 511 1 660 420180/180 42 18 18 511 1 660 420200/110 42 20 11 511 1 790 490200/125 42 20 12 511 1 790 490200/140 42 20 14 511 1 790 490200/160 42 20 16 511 1 790 490200/180 42 20 18 511 1 790 490200/200 42 20 20 511 1 790 490225/110 42 22 11 511 1 702 540225/125 42 22 12 511 1 702 540225/140 42 22 14 511 1 702 540225/160 42 22 16 511 1 702 540225/180 42 22 18 511 1 702 540225/200 42 22 20 511 1 702 540250/110 42 25 11 511 1 960 580250/125 42 25 12 511 1 960 580250/140 42 25 14 511 1 960 580250/160 42 25 16 511 1 960 580250/180 42 25 18 511 1 960 580250/200 42 25 20 511 1 960 580250/225 42 25 22 511 1 960 580250/250 42 25 25 511 1 960 580280/160 42 28 16 511 1 1000 640280/180 42 28 18 511 1 1000 640280/200 42 28 20 511 1 1000 640280/225 42 28 22 511 1 1000 640280/250 42 28 25 511 1 1000 640280/280 42 28 28 511 1 1000 640315/160 42 31 16 511 1 1150 730315/180 42 31 18 511 1 1150 730315/200 42 31 20 511 1 1150 730315/225 42 31 22 511 1 1150 730315/250 42 31 25 511 1 1150 730315/280 42 31 28 511 1 1150 730315/315 42 31 31 511 1 1150 730355/200 42 35 20 511 1 1210 780355/225 42 35 22 511 1 1210 780355/250 42 35 25 511 1 1210 780355/280 42 35 28 511 1 1210 780355/315 42 35 31 511 1 1210 780355/355 42 35 35 511 1 1210 780400/200 42 40 20 511 1 1270 840400/225 42 40 22 511 1 1270 840400/250 42 40 25 511 1 1270 840400/280 42 40 28 511 1 1270 840400/315 42 40 31 511 1 1270 840400/355 42 40 35 511 1 1270 840400/400 42 40 40 511 1 1270 840450/250 42 45 25 511 1 1340 900450/280 42 45 28 511 1 1340 900450/315 42 45 31 511 1 1340 900450/355 42 45 35 511 1 1340 900450/400 42 45 40 511 1 1340 900450/450 42 45 45 511 1 1340 900500/500 42 50 50 511 1 1410 960560/560 42 56 56 511 1 1500 1030630/630 42 63 63 511 1 1600 1110


48




Table 1.62 Elbow 90° long for butt welding and electrofusion | PE100 | SDR 17 | Water 10 bar / gas 15 bar

de Art. Nr. q L l1 Z1 Z2

50 39 05 46 517 10 223 55 75 40

63 39 06 46 517 10 245 63 93 23

75 39 07 46 517 10 290 75 103 37

90 39 09 46 517 5 370 85 148 51

110 39 11 46 517 5 400 85 164 66

125 39 12 46 517 1 440 105 185 45

160 39 16 46 517 1 540 115 260 50

180 39 18 46 517 1 575 116 268 75

200 39 20 46 517 1 625 122 287 94

225 39 22 46 517 1 705 135 350 85

de Art. Nr. q L l1 Z1 Z2

40 39 04 46 511 10 185 45 75 40

50 39 05 46 511 10 223 55 90 23

63 39 06 46 511 10 245 63 93 23

75 39 07 46 511 10 290 75 101 37

90 39 09 46 511 5 370 85 148 51

110 39 11 46 511 5 400 85 164 66

125 39 12 46 511 1 440 105 185 45

160 39 16 46 511 1 540 110 260 50

180 39 18 46 511 1 575 116 268 75

200 39 20 46 511 1 625 122 287 94

225 39 22 46 511 1 705 135 350 85

de Art. Nr. q Z l

63 13 06 92 517 1 95 56

75 13 07 92 517 1 116 72

90 13 09 92 517 1 139 78

110 13 11 92 517 1 158 86

125 13 12 92 517 1 180 104

140 13 14 92 517 1 198 119

160 13 16 92 517 1 210 117

180 13 18 92 517 1 222 116

200 13 20 92 517 1 250 128

225 13 22 92 517 1 269 136

250 13 25 92 517 1 307 180

280 13 28 92 517 1 340 200

315 13 31 92 517 1 370 210


49



de Art. Nr. q Z l

20 13 01 92 511 1 70 60

25 13 02 92 511 1 63 42

32 13 03 92 511 1 72 47

40 13 04 92 511 1 69 44

50 13 05 92 511 1 77 50

63 13 06 92 511 1 95 56

75 13 07 92 511 1 116 72

90 13 09 92 511 1 139 78

110 13 11 92 511 1 158 86

125 13 12 92 511 1 180 104

140 13 14 92 511 1 198 119

160 13 16 92 511 1 210 117

180 13 18 92 511 1 222 116

200 13 20 92 511 1 250 128

225 13 22 92 511 1 269 136

250 13 25 92 511 1 307 180

280 13 28 92 511 1 340 200

315 13 31 92 511 1 370 210


de Art. Nr. q Z l

63 13 06 46 517 1 82 56

75 13 07 46 517 1 96 75

90 13 09 46 517 1 120 84

110 13 11 46 517 1 129 91

125 13 12 46 517 1 147 101

140 13 14 46 517 1 153 104

160 13 16 46 517 1 169 113

180 13 18 46 517 1 186 120

200 13 20 46 517 1 201 127

225 13 22 46 517 1 218 134

250 13 25 46 517 1 217 155

280 13 28 46 517 1 232 162

315 13 31 46 517 1 251 173


50





de Art. Nr. q Z l

20 13 01 46 511 1 44 39

25 13 02 46 511 1 41 35

32 13 03 46 511 1 48 47

40 13 04 46 511 1 58 44

50 13 05 46 511 1 74 54

63 13 06 46 511 1 82 56

75 13 07 46 511 1 96 75

90 13 09 46 511 1 120 84

110 13 11 46 511 1 129 91

125 13 12 46 511 1 147 101

140 13 14 46 511 1 153 104

160 13 16 46 511 1 169 113

180 13 18 46 511 1 186 120

200 13 20 46 511 1 201 127

225 13 22 46 511 1 218 134

250 13 25 46 511 1 217 155

280 13 28 46 511 1 232 162

315 13 31 46 511 1 251 173

de Art. Nr. q Z l

75 13 07 33 517 1 108 77

90 13 09 33 517 1 116 85

110 13 11 33 517 1 130 96

125 13 12 33 517 1 143 102

140 13 14 33 517 1 148 110

160 13 16 33 517 1 154 108

180 13 18 33 517 1 160 116

200 13 20 33 517 1 170 122

225 13 22 33 517 1 185 129

de Art. Nr. q Z l75 13 07 33 511 1 108 77

90 13 09 33 511 1 116 85

110 13 11 33 511 1 130 96

125 13 12 33 511 1 143 102

140 13 14 33 511 1 148 110

160 13 16 33 511 1 154 108

180 13 18 33 511 1 160 116

200 13 20 33 511 1 170 122

225 13 22 33 511 1 185 129


51


Table 1.68 Bend 90° R = 1 x de long for butt welding and electrofusion | PE100 | SDR 17 | Water 10 bar / gas 5 bar

Table 1.69 Bend 90° R = 1 x de long for butt welding and electrofusion | PE100 | SDR 11 | Water 16 bar / gas 10 bar

de Art. Nr. q l Z R

63 12 06 91 517 1 63 128 63

75 12 07 91 517 1 70 148 75

90 12 09 91 517 1 71 164 90

110 12 11 91 517 1 75 188 110

125 12 12 91 517 1 85 213 125

140 12 14 91 517 1 90 234 140

160 12 16 91 517 1 90 254 160

180 12 18 91 517 1 100 284 180

200 12 20 91 517 1 108 312 200

225 12 22 91 517 1 115 344 225

de Art. Nr. q l Z R

20 12 01 91 511 1 37 59 20

25 12 02 91 511 1 39 66 25

32 12 03 91 511 1 44 78 32

40 12 04 91 511 1 49 91 40

50 12 05 91 511 1 55 107 50

63 12 06 91 511 1 63 128 63

75 12 07 91 511 1 70 148 75

90 12 09 91 511 1 71 164 90

110 12 11 91 511 1 75 188 110

125 12 12 91 511 1 85 213 125

140 12 14 91 511 1 90 234 140

160 12 16 91 511 1 90 254 160

180 12 18 91 511 1 100 284 180

200 12 20 91 511 1 108 312 200

225 12 22 91 511 1 115 344 225


52


Table 1.70 Reducer concentric long for butt welding and electrofusion | PE100 | SDR 17 | Water 10 bar / gas 5 bar

de1/de2 Art. Nr. q L l1 l250/32 45 05 03 517 1 132 55 44

50/40 45 05 04 517 1 134 55 49

63/32 45 06 03 517 1 146 63 44

63/40 45 06 04 517 1 150 63 49

63/50 45 06 05 517 1 150 63 55

75/63 45 07 06 517 1 147 66 63

90/50 45 09 05 517 1 142 64 49

90/63 45 09 06 517 1 144 69 55

90/75 45 09 07 517 1 163 74 65

110/63 45 11 06 517 1 174 85 63

110/75 45 11 07 517 1 180 85 57

110/90 45 11 09 517 1 179 79 74

125/63 45 12 06 517 1 187 87 61

125/75 45 12 07 517 1 205 105 76

125/90 45 12 09 517 1 216 99 86

125/110 45 12 11 517 1 201 89 84

140/75 45 14 07 517 1 230 112 70

140/90 45 14 09 517 1 230 112 79

140/110 45 14 11 517 1 230 112 82

140/125 45 14 12 517 1 214 99 92

160/90 45 16 09 517 1 216 101 72

160/110 45 16 11 517 1 223 104 84

160/125 45 16 12 517 1 227 95 91

160/140 45 16 14 517 1 217 110 95

180/90 45 18 09 517 1 237 105 79

180/110 45 18 11 517 1 270 120 92

180/125 45 18 12 517 1 278 116 103

180/140 45 18 14 517 1 270 120 110

180/160 45 18 16 517 1 277 115 114

200/125 45 20 12 517 1 283 123 103

200/140 45 20 14 517 1 275 120 110

200/160 45 20 16 517 1 253 105 100

200/180 45 20 18 517 1 272 120 115

225/110 45 22 11 517 1 312 130 94

225/140 45 22 14 517 1 295 130 110

225/160 45 22 16 517 1 312 130 109

225/180 45 22 18 517 1 310 130 111

225/200 45 22 20 517 1 272 124 115

250/160 45 25 16 517 1 339 138 111

250/180 45 25 18 517 1 338 137 123

250/200 45 25 20 517 1 337 137 127

250/225 45 25 22 517 1 337 146 137

280/180 45 28 18 517 1 350 146 119

280/200 45 28 20 517 1 350 146 124

280/225 45 28 22 517 1 350 146 129

280/250 45 28 25 517 1 350 146 134

315/200 45 31 20 517 1 380 180 134

315/225 45 31 22 517 1 380 157 133

315/250 45 31 25 517 1 380 157 138

315/280 45 31 28 517 1 380 157 148

355/250 45 35 25 517 1 415 172 143

355/280 45 35 28 517 1 415 172 148

355/315 45 35 31 517 1 415 172 158

400/280 45 40 28 517 1 450 187 153

400/315 45 40 31 517 1 450 187 158

400/355 45 40 35 517 1 450 187 168


53


Table 1.71 Reducer concentric long for butt welding and electrofusion | PE100 | SDR 11 | Water 16 bar / gas 10 bar

de1/de2 Art. Nr. q L l1 l225/20 45 02 01 511 1 87 40 4132/20 45 03 01 511 1 92 43 3932/25 45 03 02 511 1 89 44 3740/20 45 04 01 511 1 94 45 3640/25 45 04 02 511 1 96 47 3540/32 45 04 03 511 1 93 50 3950/25 45 05 02 511 1 136 62 4850/32 45 05 03 511 1 134 61 5050/40 45 05 04 511 1 134 61 5663/32 45 06 03 511 1 150 69 5063/40 45 06 04 511 1 152 69 5563/50 45 06 05 511 1 151 69 6075/50 45 07 05 511 1 148 64 5875/63 45 07 06 511 1 149 65 5990/50 45 09 05 511 1 142 64 4990/63 45 09 06 511 1 144 69 5590/75 45 09 07 511 1 163 76 61110/63 45 11 06 511 1 174 85 63110/75 45 11 07 511 1 180 85 57110/90 45 11 09 511 1 179 99 93125/63 45 12 06 511 1 187 87 61125/75 45 12 07 511 1 205 105 76125/90 45 12 09 511 1 216 99 86125/110 45 12 11 511 1 200 90 82140/75 45 14 07 511 1 230 112 70140/90 45 14 09 511 1 230 112 79140/110 45 14 11 511 1 230 112 82140/125 45 14 12 511 1 211 96 90160/90 45 16 09 511 1 217 102 74160/110 45 16 11 511 1 223 104 84160/125 45 16 12 511 1 231 98 92160/140 45 16 14 511 1 217 110 95180/90 45 18 09 511 1 237 105 79180/110 45 18 11 511 1 270 120 92180/125 45 18 12 511 1 278 116 103180/140 45 18 14 511 1 270 120 110180/160 45 18 16 511 1 277 115 114200/125 45 20 12 511 1 283 123 103200/140 45 20 14 511 1 275 120 110200/160 45 20 16 511 1 252 105 100200/180 45 20 18 511 1 272 120 115225/110 45 22 11 511 1 312 130 94225/140 45 22 14 511 1 295 130 110225/160 45 22 16 511 1 312 130 109225/180 45 22 18 511 1 310 130 111225/200 45 22 20 511 1 272 124 115250/160 45 25 16 511 1 339 138 111250/180 45 25 18 511 1 338 137 123250/200 45 25 20 511 1 337 137 127250/225 45 25 22 511 1 337 137 137280/180 45 28 18 511 1 350 146 119280/200 45 28 20 511 1 350 146 124280/225 45 28 22 511 1 350 146 129280/250 45 28 25 511 1 350 146 134315/200 45 31 20 511 1 380 180 134315/225 45 31 22 511 1 380 157 133315/250 45 31 25 511 1 380 157 138315/280 45 31 28 511 1 380 157 148355/250 45 35 25 511 1 415 172 143355/280 45 35 28 511 1 415 172 148355/315 45 35 31 511 1 415 172 158400/280 45 40 28 511 1 450 187 153400/315 45 40 31 511 1 450 187 158400/355 45 40 35 511 1 450 187 168


54


Table 1.72 Stub end, short form | SDR 17,6 | SDR 17 | Short spigot end

Table 1.73 Stub end, short form | SDR 26 | Short spigot end

Table 1.74 Stub end, short form | SDR 11 | Short spigot end

d1 d3 le1 h1 D Z Weight KGEuro/pc.

PE 100 PP-R50 61 23 12 88 50 0.1 7.5063 75 16 14 102 50 0.1 6.6075 89 14 16 122 50 0.2 7.8090 105 43 17 138 80 0.3 16.70110 125 37 18 158 80 0.3 16.70125 132 42 18 158 80 0.3 17.60140 155 34 18 188 80 0.5 35.30160 175 34 18 212 80 0.6 34.70180 180 30 20 212 80 0.6 42.50200 232 36 24 268 100 1.4 57.30225 235 46 24 268 100 1.2 59.20250 285 35 25 320 100 2.0 67.20280 291 45 25 320 100 1.8 65.50315 335 35 25 370 100 2.5 71.70355 373 50 30 430 120 3.9 119.10400 427 42 33 482 120 5.2 154.20450 514 14 46 585 120 10.1 227.60500 530 24 46 585 120 8.6 201.80560 615 10 50 685 120 13.3 272.00630 642 30 50 685 120 10.6 230.00710 737 20 50 800 120 15.5 368.80800 840 18 52 905 120 20.5 387.60900 944 15 55 1005 120 25.3 553.70

1000 1047 10 60 1110 140 35.4 907.901200 1245 30 90 1330 190 76.0 1556.60


PE 100 PP-R1400 1425 27 70 1535 180 65.0 2914.701600 1630 30 80 1760 200 97.0 4205.70


PE 100 PP-R20 27 30 7 45 50 0.01 4.8025 33 28 9 58 50 0.02 4.8032 40 27 10 68 50 0.04 4.9040 50 24 11 78 50 0.1 5.9050 61 23 12 88 50 0.1 6.0063 75 16 14 102 50 0.1 6.7075 89 14 16 122 50 0.2 12.4090 105 43 17 138 80 0.3 16.71110 125 37 18 158 80 0.4 17.20125 132 35 25 158 80 0.5 17.60140 155 27 25 188 80 0.7 35.90160 175 27 25 212 80 0.9 36.30190 190 20 30 212 80 0.9 46.80200 232 28 32 268 100 2.0 63.40225 235 38 32 268 100 1.8 64.90250 285 25 35 320 100 2.9 73.50280 291 35 35 320 100 2.6 77.00315 335 25 35 370 100 3.6 81.70355 373 40 40 430 100 5.7 138.70400 427 29 46 482 120 7.6 180.30450 514 10 60 595 130 14.2 267.30500 530 10 60 595 120 12.2 228.20560 615 10 60 695 130 18.5 325.60630 642 20 60 695 120 15.3 268.30


55


Table 1.75 Stub end, long form | SDR 17,6 | SDR 17 | Long welding end, for the use of electrofusion socket

Table 1.76 Stub end, long form | SDR 17,6 | SDR 17 | Long welding end, for the use of electrofusion socket


PE 100 PP-R63 75 81 14 102 115 0.2 9.3075 89 89 16 122 125 0.2 12.2090 105 103 17 138 140 0.3 16.30110 125 117 18 158 160 0.5 20.20125 132 132 18 158 170 0.6 25.10140 155 154 18 188 200 0.9 46.20160 175 154 18 212 200 1.1 53.70180 180 150 20 212 200 1.2 60.60200 232 136 24 268 200 2.1 69.20225 235 140 24 268 200 2.1 82.80


PE 100 PP-R50 61 73 12 88 100 0.1 7.9063 75 81 14 102 115 0.2 8.1075 89 99 16 122 125 0.3 11.009 105 103 17 138 140 0.4 14.90

110 125 117 18 158 160 0.7 20.20125 132 125 25 158 170 0.8 25.10140 155 147 25 188 200 1.3 46.20160 175 147 25 212 200 1.7 53.70180 180 140 30 212 200 1.9 60.60200 232 128 32 268 200 3.0 69.20225 235 138 32 268 200 3.1 82.90


56


Table 1.77 Tee, short form | SDR 17,6 | SDR 17 | SDR 11

d1 d2 le1 le2 Z1 Z2 Z3 D Weight KGEuro/pc.

PE 100 PP-R280 63 75 200 140 365 140 341 7.8 365.40280 75 75 200 145 365 145 343 8.5 371.90280 90 75 200 152.5 365 152.5 347 9.4 382.40280 110 75 200 162.5 365 162.5 353 10.8 394.80280 125 75 200 170 365 170 358 12.1 407.50280 140 75 200 177.5 365 177.5 363 13.5 465.30280 160 75 200 187.5 365 187.5 372 15.5 469.50280 180 75 200 197.5 365 197.5 381 18.0 624.80280 200 75 200 207.5 365 207.5 391 20.8 649.90280 225 75 200 220 365 220 404 24.8 692.30315 75 75 200 145 380 145 378 10.2 370.50315 90 75 200 152.5 380 152.5 381 11.2 489.80315 110 75 200 162.5 380 162.5 386 12.8 508.50315 125 75 200 170 380 170 391 14.1 524.80315 140 75 200 177.5 380 177.5 396 15.6 543.50315 160 75 200 187.5 380 187.5 404 17.8 563.40315 180 75 200 197.5 380 197.5 412 20.4 584.40315 200 75 200 207.5 380 207.5 421 23.4 612.80315 225 75 200 220 380 220 434 27.5 732.80315 250 75 200 232.5 380 232.5 447 32.3 780.80355 90 75 200 152.5 400 152.5 420 13.8 471.30355 110 75 200 162.5 400 162.5 425 15.6 491.30355 125 75 200 170 400 170 429 17.0 506.80355 140 75 200 177.5 400 177.5 434 18.7 596.40355 160 75 200 187.5 400 187.5 440 21.0 623.50355 180 75 200 197.5 400 197.5 448 23.7 650.20355 200 75 200 207.5 400 207.5 457 26.9 678.40355 225 75 200 220 400 220 468 31.2 795.00355 250 75 200 232.5 400 232.5 481 36.2 837.40355 280 75 200 250 400 250 497 43.6 1040.40400 110 75 200 162.5 425 162.5 468 18.7 589.10400 125 75 200 170 425 170 472 20.3 609.80400 140 75 200 177.5 425 177.5 476 22.1 630.20400 160 75 200 187.5 425 187.5 483 24.7 660.40400 180 75 200 197.5 425 197.5 490 27.6 796.00400 200 75 200 207.5 425 207.5 497 30.9 839.10400 225 75 200 220 425 220 508 35.5 888.10400 250 75 200 232.5 425 232.5 520 40.7 933.50400 280 75 200 250 425 250 535 48.5 1140.30400 315 75 200 267.5 425 267.5 554 58.3 1220.00450 125 75 200 170 450 170 520 24.4 615.60450 140 75 200 177.5 450 177.5 524 26.4 651.10450 160 75 200 187.5 450 187.5 530 29.2 761.50450 180 75 200 197.5 450 197.5 536 32.3 801.30450 200 75 200 207.5 450 207.5 544 35.9 836.50450 225 75 200 220 450 220 553 40.8 885.00450 250 75 200 232.5 450 232.5 564 46.3 1056.10450 280 75 200 250 450 250 578 54.5 1141.60450 315 75 200 267.5 450 267.5 596 64.8 1497.50450 355 75 200 287.5 450 287.5 618 78.2 1612.50450 450 75 200 335 550 335 678 109.0 2270.90500 140 75 200 177.5 475 177.5 573 31.0 779.40500 160 75 200 187.5 475 187.5 578 34.1 817.20500 180 75 200 197.5 475 197.5 584 37.5 848.40500 200 75 200 207.5 475 207.5 590 41.3 888.00500 225 75 200 220 475 220 599 46.5 1182.00500 250 75 200 232.5 475 232.5 609 52.3 1252.60500 280 75 200 250 475 250 622 61.0 1333.90500 315 75 200 267.5 475 267.5 639 71.8 1419.40500 355 75 200 287.5 475 287.5 660 85.8 1812.10500 400 75 300 310 575 310 685 104.1 2019.20

Barrel diameter with short welding ends | Branch with long welding end | In conformity with pressure class Equal tees with outer diameter 560, 630, 710 and 900 are manufactured from our patented profile bars


57


Table 1.77 Tee, short form | SDR 17,6 | SDR 17 | SDR 11 (Continued)

Table 1.78 Tee, long form | SDR 17,6 | SDR 17 | SDR 11


PE 100 PP-R500 500 75 300 390 575 390 - 113.0 3439.90560 160 75 200 187.5 500 187.5 636 40.6 980.50560 180 75 200 197.5 500 197.5 641 44.4 1204.00560 200 75 200 207.5 500 207.5 647 48.8 1254.50560 225 75 200 220 500 220 655 54.1 1322.30560 250 75 200 232.5 500 232.5 664 60.4 1393.40560 280 75 200 250 500 250 676 69.4 1490.0560 315 75 200 267.5 500 267.5 692 81.0 1807.50560 355 75 200 287.5 500 287.5 711 95.7 1941.40560 400 75 300 310 600 310 734 114.8 2792.90560 450 75 300 335 600 335 763 140.6 3041.70560 560 75 300 425 600 425 - 119.0 3680.00630 180 75 200 197.5 540 197.5 708 5.3 1247.00630 200 75 200 207.5 540 207.5 714 57.8 1299.60630 225 75 200 220 540 220 721 63.9 1366.30630 250 75 200 232.5 540 232.5 729 70.7 1431.50630 280 75 200 250 540 250 740 80.7 2059.20630 315 75 200 267.5 540 267.5 754 92.8 2187.90630 355 75 200 287.5 540 287.5 772 108.3 2337.20630 400 75 300 310 640 310 794 128.5 2594.10630 450 75 300 335 640 335 820 155.5 3714.30630 500 75 300 360 640 360 849 187.0 3998.10630 630 100 300 500 640 500 - 172.0 4643.40

Barrel diameter with short welding ends | Branch with long welding end | In conformity with pressure class Equal tees with outer diameter 560, 630, 710 and 900 are manufactured from our patented profile bars


PE 100 PP-R280 63 200 200 340 365 340 341 15.8 552.10280 75 200 200 345 365 345 343 16.5 558.50280 90 200 200 352.5 365 352.5 347 17.4 569.10280 110 200 200 362.5 365 362.5 353 18.8 581.30280 125 200 200 370 365 370 358 20.1 594.10280 140 200 200 377.5 365 377.5 363 21.5 651.90280 160 200 200 387.5 365 387.5 372 23.5 655.80280 180 200 200 397.5 365 397.5 381 26.0 811.50280 200 200 200 407.5 365 407.5 391 28.8 836.60280 225 200 200 420 365 420 404 32.8 878.80315 75 200 200 345 380 345 378 20.7 585.90315 90 200 200 352.5 380 352.5 381 21.7 705.10315 110 200 200 362.5 380 362.5 386 23.3 723.90315 125 200 200 370 380 370 391 24.6 470.30315 140 200 200 377.5 380 377.5 396 26.1 758..80315 160 200 200 387.5 380 387.5 404 28.3 778.80315 180 200 200 397.5 380 397.5 412 30.9 799.70315 200 200 200 407.5 380 407.5 421 33.9 828.20315 225 200 200 420 380 420 434 38.0 948.30315 250 200 200 432.5 380 432.5 447 42.8 996.30355 90 200 200 352.5 400 352.5 420 26.8 723.80355 110 200 200 362.5 400 362.5 425 28.6 743.80355 125 200 200 370 400 370 429 30.0 759.00355 140 200 200 377.5 400 377.5 434 31.7 848.90355 160 200 200 387.5 400 387.5 440 34.0 875.90355 180 200 200 397.5 400 397.5 448 36.7 902.60355 200 200 200 407.5 400 407.5 457 39.9 930.80355 225 200 200 420 400 420 468 44.2 1047.30355 250 200 200 432.5 400 432.5 481 49.2 1089.90355 280 200 200 450 400 450 497 56.6 1292.80

Long welding ends, for the use of electrofusion sockets | In conformity with pressure classEqual tees with outer diameter 560, 630, 710 and 900 are manufactured from our patented profile bars


58


Table 1.78 Tee, long form | SDR 17,6 | SDR 17 | SDR 11 (Continued)


PE 100 PP-R400 110 300 200 462.5 425 462.5 468 33.7 1034.10400 125 300 200 470 425 470 472 35.3 1055.60400 140 300 200 477.5 425 477.5 476 37.1 1076.80400 160 300 200 487.5 425 487.5 483 39.7 1108.50400 180 300 200 497.5 425 497.5 490 42.6 1245.60400 200 300 200 507.5 425 507.5 497 25.9 1290.20400 225 300 200 520 425 520 508 50.5 1341.80400 250 300 200 532.5 425 532.5 520 55.7 1389.50400 280 300 200 550 425 550 535 63.5 1600.10400 315 300 200 567.5 425 567.5 554 73.3 1684.30450 125 300 200 470 450 470 520 54.4 1127.60450 140 300 200 477.5 450 477.5 524 56.4 1164.00450 160 300 200 487.5 450 487.5 530 59.2 1275.70450 180 300 200 497.5 450 497.5 536 62.3 1316.90450 200 300 200 507.5 450 507.5 544 25.9 1353.70450 225 300 200 520 450 520 553 70.8 1404.70450 250 300 200 532.5 450 532.5 564 76.3 1578.40450 280 300 200 550 450 550 578 84.5 1667.20450 315 300 200 567.5 450 567.5 596 94.8 2027.70450 355 300 200 587.5 450 587.5 618 108.2 2148.60450 450 300 200 635 550 635 678 139.0 2779.50500 140 300 200 477.5 475 477.5 573 70.0 1396.30500 160 300 200 487.5 475 487.5 578 73.1 1435.50500 180 300 200 497.5 475 497.5 584 76.5 1468.10500 200 300 200 507.5 475 507.5 590 80.3 1509.20500 225 300 200 520 475 520 599 85.5 1806.00500 250 300 200 532.5 475 532.5 609 91.3 1878.80500 280 300 200 550 475 550 622 100.0 1963.70500 315 300 200 567.5 475 567.5 639 110.8 2053.90500 355 300 200 587.5 475 587.5 660 124.8 2452.20500 400 300 200 610 575 610 685 143.1 2631.80500 500 300 300 660 575 660 - 184.0 4052.40560 160 300 300 487.5 500 487.5 636 86.6 1737.50560 180 300 200 497.5 500 497.5 641 90.4 1962.60560 200 300 200 507.5 500 507.5 647 94.5 2017.80560 225 300 200 520 500 520 655 100.1 2085.10560 250 300 200 532.5 500 532.5 664 106.4 2158.60560 280 300 200 550 500 550 676 115.6 2258.40560 315 300 200 567.5 500 567.5 692 127.0 2580.80560 355 300 200 587.5 500 587.5 711 141.7 2720.50560 400 300 300 610 600 610 734 160.8 3544.30560 450 300 300 635 600 635 763 186.6 3792.90560 560 300 300 770 600 770 - 244.0 4431.20630 180 300 200 497.5 540 497.5 708 113.3 2147.70630 200 300 200 507.5 540 507.5 714 117.8 2202.00630 225 300 200 520 540 520 721 123.9 2270.90630 250 300 200 532.5 540 532.5 729 130.7 2338.80630 280 300 200 550 540 550 740 140.7 2969.80630 315 300 200 567.5 540 567.5 754 152.8 3103.30630 355 300 200 587.5 540 587.5 772 168.3 3258.30630 400 300 300 610 640 610 794 188.5 3487.70630 450 300 300 635 640 635 820 215.5 4607.90630 500 300 300 660 640 660 849 247.0 4891.80630 630 300 300 795 640 795 - 325.0 5536.90

Long welding ends, for the use of electrofusion sockets | In conformity with pressure classEqual tees with outer diameter 560, 630, 710 and 900 are manufactured from our patented profile bars


59


Table 1.79 Inverted level Tee, long form | SDR 17,6 | SDR 17 | SDR 11


PE 100 PP-R280 63 200 200 370 365 370 425 19.8 763.60280 75 200 200 372.5 365 372.5 425 20.7 774.0280 90 200 200 375 365 375 425 21.8 777.90280 110 200 200 385 365 385 430 23.5 798.70280 125 200 200 390 365 390 430 25.2 813.60280 140 200 200 395 365 395 430 26.9 837.80280 160 200 200 400 365 400 430 29.4 852.20280 180 200 200 407.5 365 407.5 435 32.5 949.78280 200 200 200 415 365 415 435 36.0 976.90280 225 200 200 420 365 420 435 41.0 995.10315 75 200 200 380 380 380 470 25.9 899.30315 90 200 200 385 380 385 475 27.2 910.90315 110 200 200 390 380 390 475 29.2 934.30315 125 200 200 395 380 395 475 30.8 9584.30315 140 200 200 400 380 400 475 32.7 974.70315 160 200 200 407.5 380 407.5 480 35.4 959.80315 180 200 200 415 380 415 480 38.7 1014.10315 200 200 200 420 380 420 485 42.4 1045.00315 225 200 200 430 380 430 485 47.5 1071.10315 250 200 200 440 380 440 485 53.5 1117.30355 90 200 200 390 400 390 525 33.5 1065.20355 110 200 200 397.5 400 397.5 530 35.8 1095.00355 125 200 200 402.5 400 402.5 530 37.58 1113.10355 140 200 200 407.5 400 407.5 530 39.7 1139.50355 160 200 200 415 400 415 530 42.5 1168.80355 180 200 200 420 400 420 525 45.9 1312.10355 200 200 200 430 400 430 540 49.9 1338.80355 225 200 200 430 400 430 540 55.3 1364.30355 250 200 200 447.5 400 447.5 540 61.5 1419.70355 280 200 200 457.5 400 457.5 545 70.8 1486.30400 110 300 200 505 425 505 595 42.2 1500.50400 125 300 200 512.5 425 512.5 595 44.2 1534.80400 140 300 200 517.5 425 517.5 600 46.4 1830.30400 160 300 200 522.5 425 522.5 600 49.7 1857.10400 180 300 200 527.5 425 527.5 600 53.3 1897.00400 200 300 200 540 425 540 605 57.4 1945.60400 225 300 200 545 425 545 605 63.2 1991.90400 250 300 200 555 425 555 605 69.7 2048.10400 280 300 200 562.5 425 562.5 610 79.4 2101.40400 315 300 200 575 425 575 610 91.7 2141.90450 125 300 200 520 450 520 660 62.6 1955.90450 140 300 200 525 450 525 660 64.9 2008.10450 160 300 200 530 450 530 665 68.1 2047.80450 180 300 200 537.5 450 537.5 665 71.7 2117.70450 200 300 200 545 450 545 665 75.8 2145.80450 225 300 200 552.5 450 552.5 665 81.5 2207.70450 250 300 200 560 450 560 665 87.8 224.20450 280 300 200 570 450 570 670 972 2331.80450 315 300 200 582.5 450 582.5 675 109.1 2396.90450 355 300 200 600 450 600 680 124.5 2518.10450 400 300 300 615 550 615 680 159.9 2643.10500 140 300 200 530 475 530 730 90.5 2293.00500 160 300 200 540 475 540 730 94.1 2323.10500 180 300 200 545 475 545 730 88 2366.80500 200 300 200 550 475 550 730 92.4 2408.70500 225 300 200 560 475 560 735 98.4 245.90500 250 300 200 567.5 475 567.5 735 105 3096.80500 280 300 200 577.5 475 577.5 740 115 3181.00500 315 300 200 590 475 590 740 127.5 3265.60500 355 300 200 605 475 605 745 143.6 3409.70500 400 300 300 620 575 620 745 164.6 3607.60

Long welding ends, for the use of electrofusion sockets | In conformity with pressure class


60


Table 1.79 Inverted level Tee, long form | SDR 17,6 | SDR 17 | SDR 11 (Continued)

Table 1.80 Concentric reducer, short form | SDR 17.6 | SDR 17


PE 100 PP-R500 450 300 300 640 575 640 750 211.6 3792.00560 160 300 200 547.5 500 547.5 810 99.6 2931.60560 180 300 200 555 500 555 810 104 2968.60560 200 300 200 560 500 560 810 108.7 3044.50560 225 300 200 570 500 570 815 115.2 3102.80560 250 300 200 577.5 500 577.5 815 122.4 3193.10560 280 300 200 587.5 500 587.5 820 133 3303.70560 315 300 200 600 500 600 820 146.1 4165.50560 355 300 200 615 500 615 825 163 4373.60560 400 300 630 600 630 830 185 4562.10560 450 300 300 645 600 645 830 214.6 4733.00560 500 300 300 665 600 665 835 280.6 5006.60630 180 300 200 565 540 565 905 130.3 3829.40630 200 300 200 572.5 540 572.5 905 135.5 3917.60630 225 300 200 580 540 580 905 142.5 4007.80630 250 300 200 590 540 590 910 150.4 4060.30630 280 300 200 600 540 600 910 161.9 4220.60630 315 300 200 610 540 610 915 175.8 4329.80630 355 300 200 625 540 625 920 193.6 6033.30630 400 300 300 640 640 640 920 216.8 6194.20630 450 300 300 655 640 655 925 247.9 6551.70630 500 300 675 640 675 930 284.1 6878.10630 560 300 300 700 640 700 935 373.8 7195.10

Long welding ends, for the use of electrofusion sockets | In conformity with pressure class

d1 d3 le1 le3 Z Weight KGEuro/pc.

PE 100 PP-R50 25 20 20 50 0.01 1.70 1.7050 32 20 21 50 0.01 1.80 1.8050 40 20 24 50 0.01 1.60 1.7063 32 25 22 60 0.03 2.40 2.2063 40 25 24 60 0.03 2.50 2.0063 50 25 27 60 0.03 2.60 2.0075 32 30 25 70 0.05 2.30 2.3075 40 30 25 70 0.05 2.50 2.5075 50 30 28 70 0.05 2.40 2.4075 63 30 33 70 0.05 2.70 2.7090 50 35 28 80 0.08 5.30 5.8090 63 35 32 80 0.08 6.00 6.4090 75 35 36 80 0.08 6.50 6.00110 50 35 34 90 0.1 6.40 5.40110 63 35 35 90 0.1 5.50 6.70110 75 35 38 90 0.1 5.90 5.70110 90 40 43 90 0.2 6.40 6.50125 63 40 38 100 0.2 6.40 7.50125 75 40 39 100 0.2 6.70 6.90125 90 40 43 100 0.2 6.70 7.40125 110 50 51 100 0.2 7.20 9.30140 75 50 37 110 0.3 9.60 9.90140 90 50 39 110 0.3 9.70 11.00140 110 50 45 110 0.3 10.40 11.80140 125 50 51 120 0.4 11.30 11.70160 90 55 40 120 0.4 13.20 13.70160 110 55 44 120 0.4 14.60 13.80160 125 55 48 120 0.4 14.00 14.30160 140 55 53 120 0.5 14.90 15.50180 90 60 44 130 0.6 20.40 21.60180 110 60 45 130 0.6 23.80 24.90

Short welding ends | Optional: it is possible to change between different SDR-classes in one reducer (e.g. SDR 11 to SDR 17); extended with pipe


61


Table 1.80 Concentric reducer, short form | SDR 17.6 | SDR 17 (Continued)


PE 100 PP-R180 125 60 47 130 0.6 23.80 22.50180 140 60 50 130 0.6 21.80 24.60180 160 60 58 130 0.6 23.90 25.20200 140 60 48 140 0.8 35.10 33.70200 160 60 54 140 0.8 31.60 39.40200 180 60 63 140 0.8 291.00 35.10225 140 65 55 160 1.2 35.30 31.80225 160 65 58 160 1.2 34.80 39.30225 180 65 65 160 1.2 39.60 39.80225 200 65 73 160 1.2 36.80 40.50250 160 75 63 180 1.6 48.80 48.00250 180 75 66 180 1.6 45.30 45.80250 200 75 72 180 1.6 51.90 54.00250 225 75 83 180 1.7 45.80 49.00280 180 85 70 200 2.3 56.40 56.80280 200 85 72 200 2.4 44.70 48.10280 225 85 80 200 2.4 59.70 58.30280 250 85 90 200 2.5 67.70 56.10315 200 95 85 230 3.4 60.40 60.20315 225 95 88 230 3.4 62.20 79.20315 250 95 95 230 3.5 70.30 74.80315 280 95 107 230 3.5 64.50 77.00355 225 57 40 140 3.1 192.50 197.20355 250 54 40 130 3 171.90 176.70355 280 53 40 120 2.7 157.50 162.40355 315 53 40 110 2.4 141.80 146.90400 225 64 40 160 4.6 293.80 297.20400 250 61 40 150 4.4 263.10 267.80400 280 60 40 140 4.1 240.50 242.80400 315 50 40 120 3.6 210.00 231.50400 355 51 40 110 3.1 194.80 198.40450 280 65 40 160 6 321.00 322.40450 315 55 40 140 5.4 281.00 283.10450 355 57 40 130 5 259.20 263.90450 400 60 40 120 4.4 220.40 226.30500 315 71 40 170 8.1 371.70 376.30500 355 62 40 150 7.3 333.70 338.20500 400 65 40 140 6.7 288.00 292.70500 450 60 40 120 5.5 229.90 236.60560 355 65 40 170 10.5 453.20 457.60560 400 68 40 160 9.9 398.60 403.20560 450 62 40 140 8.6 325.80 330.30560 500 67 40 130 7.6 279.10 284.90630 400 78 40 190 15.1 532.60 536.60630 450 72 40 170 13.7 442.30 446.60630 500 67 40 150 12 372.20 376.60630 560 64 40 130 9.8 296.50 303.70710 500 84 40 190 19 622.30 631.30710 560 81 40 170 17.4 518.80 528.00710 630 71 40 140 13.7 421.90 436.40800 560 85 40 200 19.7 776.80 783.00800 630 85 40 180 23.4 654.00 660.30800 710 78 40 150 18.9 549.10 555.90900 630 96 40 220 38.2 1033.30 1043.00900 710 89 40 190 32.8 886.40 897.50900 800 85 40 160 25.9 616.90 630.901000 710 101 40 230 50.3 1649.20 1656.901000 800 86 40 190 41.5 1167.70 1179.401000 900 75 40 150 30.6 838.50 861.40



62


Table 1.81 Concentric reducer, short form | SDR 11


PE 100 PP-R25 20 23 25 50 0.01 1.70 1.6032 20 22 22 50 0.01 1.40 1.6032 25 22 24 50 0.01 1.70 2.3040 20 21 21 50 0.01 1.70 1.8040 25 21 22 50 0.01 2.30 1.9040 32 21 24 50 0.01 1.70 1.8050 25 20 20 50 0.02 2.00 2.2050 32 20 21 50 0.02 2.30 2.3050 40 20 24 50 0.02 2.30 2.4063 32 25 22 60 0.04 2.50 2.9063 40 25 24 60 0.04 2.60 2.3063 50 25 27 60 0.05 2.50 2.4075 32 30 25 70 0.07 2.80 2.9075 40 30 25 70 0.07 2.70 2.7075 50 30 28 70 0.07 3.00 2.5075 63 30 33 70 0.08 2.90 3.0090 50 35 28 80 0.1 5.90 5.8090 63 35 32 80 0.1 6.70 6.7090 75 35 36 80 0.1 6.60 6.00110 50 35 34 90 0.2 7.90 6.60110 63 35 35 90 0.2 7.60 7.20110 75 35 38 90 0.2 7.60 7.60110 90 35 43 90 0.2 7.90 8.40125 63 40 38 100 0.3 8.70 0.40125 75 40 39 100 0.3 6.90 7.40125 90 40 43 100 0.3 7.90 8.00125 110 40 51 100 0.4 9.70 8.00140 75 50 37 110 0.5 7.40 7.60140 90 50 39 110 0.5 7.40 7.70140 110 50 45 110 0.5 7.90 8.20140 125 50 51 110 0.5 8.30 8.60160 90 55 40 120 0.7 11.30 1.60160 110 55 44 120 0.7 11.50 1.60160 125 55 48 120 0.7 12.00 2.30160 140 55 53 120 0.7 13.10 1.80180 90 60 44 130 0.9 21.10 1.90180 110 60 45 130 0.9 24.40 1.80180 125 60 47 130 0.9 22.10 2.20180 140 60 50 130 0.9 24.10 2.30200 160 60 58 130 1 24.70 2.40200 140 60 48 140 1.2 33.30 2.90200 160 60 54 140 1.3 38.80 2.30225 180 60 63 140 1.3 34.50 2.40225 140 65 55 160 1.8 44.70 2.90225 160 65 58 160 1.8 38.80 2.70225 180 65 65 160 1.8 39.40 2.50250 200 65 73 160 1.9 39.90 3.00250 160 75 63 180 2.5 47.60 5.80250 180 75 66 180 2.5 45.40 6.70250 200 75 72 180 2.5 53.50 6.00280 225 75 83 180 2.6 48.60 6.60280 180 85 70 200 3.5 56.30 7.20280 200 85 72 200 3.6 51.50 7.60280 225 85 80 200 3.7 69.30 8.40315 250 85 90 200 3.8 61.70 0.40315 200 95 85 230 5.1 70.60 7.40315 225 95 88 230 5.2 73.80 8.00315 250 95 95 230 5.3 67.20 8.00355 280 95 107 230 5.4 75.10 7.60355 225 57 40 140 4.7 197.20 7.70355 250 54 40 130 4.4 183.00 8.20355 280 53 40 120 4.1 170.70 8.60



63


Table 1.81 Concentric reducer, short form | SDR 11 (Continued)

Table 1.82 Concentric reducer, long form | SDR 17.6 | SDR 17 | SDR 11


PE 100 PP-R355 315 53 40 110 3.7 148.80 153.80400 225 64 40 160 6.8 286.60 297.20400 250 61 40 150 6.5 271.70 276.40400 280 60 40 140 6.2 251.60 253.90400 315 50 40 120 5.3 222.80 226.20400 355 51 40 110 4.8 201.40 204.80450 280 65 40 160 9 334.10 334.70450 315 55 40 140 8 296.00 298.10450 355 57 40 130 7.4 266.70 271.40450 400 60 40 120 6.6 246.70 252.50500 315 71 40 170 12 389.90 394.10500 355 62 40 150 10.8 342.30 346.80500 400 65 40 140 10 318.20 322.70500 450 60 40 120 8.3 254.90 259.60560 355 75 40 180 16.3 481.20 485.40560 400 68 40 160 14.7 432.90 437.20560 450 62 40 140 12.9 354.60 359.20560 500 67 40 130 11.4 308.90 314.90630 400 78 40 190 22.3 572.90 577.10630 450 72 40 170 20.2 476.90 481.20630 500 67 40 150 17.8 406.40 410.70630 560 64 40 130 14.8 338.00 345.00



PE 100 PP-R90 63 75 60 150 0.3 66.00 153.8090 75 75 65 150 0.3 66.00 297.20110 63 85 60 170 0.4 74.20 276.40125 63 87 76 200 0.6 83.00 253.90125 90 87 93 201 0.7 83.00 226.20125 110 87 105 201 0.7 83.00 204.80140 90 105 80 210 0.8 86.00 334.70140 110 105 90 210 0.9 86.00 298.10160 90 122 93 257 1 101.60 271.40160 110 122 105 257 1.4 101.60 252.50160 125 122 107 250 1.4 101.60 394.10160 140 122 110 250 1.5 101.60 346.80180 160 109 142 263 2.2 110.00 322.70200 160 119 153 295 2.6 134.40 259.60225 110 129 105 302 2.9 174.50 485.40225 160 129 142 310 3.3 161.10 437.20225 180 160 160 355 3.8 161.10 359.20225 200 129 13 283 3.5 145.20 314.90250 200 160 125 320 4.6 184.50 577.10250 225 160 160 340 4.5 173.60 481.20

Long welding ends, for the use of electrofusion sockets | Optional: it is possible to change between different SDR-classes in one reducer (e.g. SDR 11 to SDR 17); extended with pipe


64


Table 1.83 Inverted level reducer, short form | SDR 17.6 | SDR 17


PE 100 PP-R160 90 66 40 150 0.9 150.50 152.60160 110 57 40 130 0.7 147.70 149.90160 125 55 40 120 0.6 140.60 142.90160 140 48 40 105 0.5 135.90 138.10180 110 66 40 150 1.1 159.40 161.50180 125 64 40 135 1 154.50 156.70180 140 57 40 125 0.8 145.80 148.10180 160 53 40 10 0.7 140.10 142.40200 125 68 40 155 1.4 174.40 178.90200 140 61 40 140 1.2 166.00 168.30200 160 57 40 125 1 155.50 157.60200 180 53 40 110 0.8 145.00 147.30225 140 78 40 165 2 196.70 201.20225 160 68 40 145 1.6 184.80 189.10225 180 59 40 130 1.6 171.10 175.50225 200 55 40 115 1 155.00 150.50250 160 75 40 170 2.4 214.00 28.40250 180 66 40 150 1.9 192.40 196.80250 200 67 40 13 1.8 177.60 82.10250 225 55 40 115 1.3 161.60 165.80280 180 79 40 180 3.2 239.70 244.00280 200 70 40 160 2.6 216.00 220.40280 225 64 40 140 2.1 195.60 199.90280 250 58 40 120 1.7 179.30 183.60315 200 81 40 190 4.3 276.30 287.30315 225 75 40 170 3.6 252.60 261.30315 250 68 40 150 3 230.50 234.70315 280 55 40 125 2.2 202.30 209.00355 225 93 40 210 6.4 343.50 354.20355 250 82 40 180 5.2 297.90 304.20355 280 73 40 160 4.1 260.00 266.60355 315 62 40 130 3.1 226.40 233.10400 250 102 40 230 9.2 606.90 637.60400 280 89 40 200 7.3 476.30 498.30400 315 78 50 180 5.9 403.20 414.10400 355 59 50 140 4.1 311.20 322.20450 280 111 50 250 13 720.70 750.10450 315 90 50 230 9.8 654.30 684.60450 355 82 50 190 7.9 514.10 529.30450 400 67 50 150 8.6 392.30 407.60500 315 113 50 270 16.6 872.40 918.00500 355 95 50 240 12.8 768.60 798.60500 400 89 50 200 10.5 564.70 595.20500 450 66 50 150 6.9 448.50 463.80560 400 117 50 270 18.6 962.90 1008.40560 450 4 50 220 14.5 659.30 689.60560 500 81 70 200 10.8 561.80 592.40630 450 136 50 290 27.7 1441.00 1501.40630 500 113 70 265 21.4 1014.00 1043.90630 560 96 70 210 15.7 760.30 790.70710 560 122 70 280 29.7 1319.00 1364.10710 630 100 70 220 21.1 1023.20 1069.00800 560 163 70 370 57.5 2193.70 2236.90800 630 131 70 300 41.3 1520.40 1564.90800 710 105 70 230 28.1 1066.40 1111.90900 630 187 70 410 81.2 2900.50 2989.20900 710 151 70 330 57.7 2007.30 2066.60900 800 130 70 260 41 1491.00 1551.501000 710 196 70 430 105 3941.30 4024.001000 800 165 70 350 76.8 3061.10 3146.901000 900 139 70 270 52.7 1963.40 2052.60



65


Table 1.84 Inverted level reducer, short form | SDR 11


PE 100 PP-R160 90 62 40 150 1 150.50 152.60160 110 58 40 130 0.9 147.70 149.90160 125 55 40 120 0.8 141.50 143.70160 140 53 50 105 0.8 135.90 138.10180 110 62 50 150 1.3 159.40 161.50180 125 60 50 135 1.2 154.50 156.70180 140 58 50 125 1.1 147.10 149.00180 160 53 50 110 1 141.40 143.60200 125 65 50 155 1.6 174.40 178.90200 140 62 50 140 1.5 169.00 171.30200 160 63 50 125 1.4 155.50 157.60200 180 53 50 110 1.2 145.80 148.10225 140 69 50 165 2.3 196.70 201.20225 160 65 50 145 2 187.80 189.10225 180 60 50 130 1.7 172.60 177.00225 200 56 70 115 1.6 156.90 161.40250 160 77 50 170 3.1 214.00 218.40250 180 67 70 150 2.5 193.80 198.30250 200 63 70 135 2.3 180.40 184.80250 225 56 70 115 1.9 164.60 169.00280 180 81 70 180 4.1 239.70 244.00280 200 72 70 160 3.5 216.00 220.40280 225 65 70 140 3 197.60 202.00280 250 58 70 120 2.5 179.30 183.60315 200 84 70 190 5.5 276.30 287.30315 225 77 70 170 4.8 256.40 266.80315 250 70 70 150 4.1 231.70 235.90315 280 65 70 125 3.5 206.40 213.10355 225 86 70 210 7.4 343.50 354.20355 250 84 70 185 6.7 300.00 306.30355 280 75 160 5.6 267.30 273.30355 315 73 40 130 4.8 226.40 223.10400 250 115 40 240 11.9 618.10 648.70400 280 101 40 210 9.8 476.30 498.30400 315 89 50 190 8.3 412.70 423.70400 355 80 50 150 6.8 323.60 334.50450 280 115 40 260 15.5 724.40 754.70450 315 103 50 240 13.3 667.20 697.70450 355 94 50 200 11.2 535.00 550.00450 400 78 50 160 5.6 409.10 424.30500 315 127 50 280 21.5 889.10 934.60500 355 118 50 250 18.6 785.50 815.50500 400 111 50 210 15.9 600.20 630.50500 450 87 50 160 11.7 475.80 490.90560 400 140 50 280 26.6 983.20 1028.70560 450 126 50 230 21.7 701.20 731.70560 500 113 70 210 18.7 587.20 618.10630 450 150 50 300 36.5 1469.10 1529.40630 500 136 70 275 31.6 1034.20 1064.00630 560 117 70 220 24.8 797.70 827.90



66


Table 1.85 Seamless bend 45° | SDR 17.6 | SDR 17

d1 le1 α r ≈ Z1 Z3 Weight KGEuro/pc.PE 100

250 250 45 1.5d 608 608 10.9 188.60280 250 45 1.5d 609 609 15.8 216.60315 300 45 1.5d 685 685 20.8 247.80355 300 45 1.5d 761 761 30.2 305.40400 300 45 1.5d 813 813 42.9 375.50450 300 45 1.5d 930 930 60.7 477.80500 350 45 1.5d 1066 1066 82.9 879.40560 350 45 1.5d 1118 1118 120.1 1101.70630 500 45 1.5d 1170 1170 159.7 1491.00710 500 45 2d 1581 1581 274.0 2872.40800 500 45 2d 1785 1785 390.0 3691.60900 500 45 2d 1989 1989 553.0 4860.60

Long welding ends, for the use of electrofusion sockets | Optional: more angles available

Table 1.86 Seamless bend 45° | SDR 11


250 250 45 1.5d 608 608 15 220.20280 250 45 1.5d 609 609 21.6 262.50315 300 45 1.5d 685 685 28.4 306.90355 300 45 1.5d 761 761 41 391.50400 300 45 1.5d 813 813 58.5 494.90450 300 45 1.5d 930 930 82.6 648.60500 350 45 1.5d 1066 1066 113.1 1112.30560 350 45 1.5d 1118 1118 164.3 1447.20630 500 45 1.5d 1170 1170 216.4 1946.60710 500 45 2d 1581 1581 363 3789.60800 500 45 2d 1785 1785 518.8 6818.60900 500 45 2d 1989 1989 728 8586.90



67


Table 1.87 Seamless bend 90° | SDR 17.6 | SDR 17

Table 1.88 Seamless bend 90° | SDR 11


250 250 90 1.5d 830 830 14.7 2089.70280 250 90 1.5d 890 890 21 246.00315 300 90 1.5d 1026 1026 28.3 290.30355 300 90 1.5d 1064 1064 41 366.70400 300 90 1.5d 1129 1129 58.2 461.10450 300 90 1.5d 1395 1395 82.5 602.10500 350 90 1.5d 1411 1411 112.9 1050.50560 350 90 1.5d 1680 1680 162.1 1337.50630 500 90 1.5d 1803 1803 219.5 1829.10710 500 90 2d 2555 2555 388 3638.20800 500 90 2d 2843 2843 554 4785.80900 500 90 2d 3136 3136 786 6409.10



250 250 90 1.5d 830 830 19.9 252.00280 250 90 1.5d 890 890 28.5 306.30315 300 90 1.5d 1026 1026 38.2 369.20355 300 90 1.5d 1064 1064 55 481.80400 300 90 1.5d 1129 1129 78.6 621.20450 300 90 1.5d 1395 1395 111.2 832.30500 350 90 1.5d 1411 1411 152.6 1364.50560 350 90 1.5d 1680 1680 219.7 1794.90630 500 90 1.5d 1803 1803 295.2 2443.50710 500 90 2d 2555 2555 513 4919.50800 500 90 2d 2843 2843 732 9171.40900 500 90 2d 3136 3136 1030 11681.50



68


PRODUCT PRODUCT DESCRIPTION Ø CODE

COUPLINGSCOUPLINGS 16mm 510.160COUPLINGS 20mm 510.200COUPLINGS 25mm 510.250COUPLINGS 32mm 510.320COUPLINGS 40mm 510.400COUPLINGS 50mm 510.500COUPLINGS 63mm 510.630COUPLINGS 75mm 510.750COUPLINGS 90mm 510.900COUPLINGS 110mm 510.110

REDUCING COUPLINGSREDUCING COUPLINGS 20x16mm 512.20AREDUCING COUPLINGS 25x20mm 512.25BREDUCING COUPLINGS 32x20mm 512.32BREDUCING COUPLINGS 32x25mm 512.32CREDUCING COUPLINGS 40x25mm 512.40CREDUCING COUPLINGS 40x32mm 512.40DREDUCING COUPLINGS 50x25mm 512.50CREDUCING COUPLINGS 50x32mm 512.50DREDUCING COUPLINGS 50x40mm 512.50EREDUCING COUPLINGS 63x32mm 512.63DREDUCING COUPLINGS 63x40mm 512.63EREDUCING COUPLINGS 63x50mm 512.63FREDUCING COUPLINGS 75x50mm 512.75FREDUCING COUPLINGS 75x63mm 512.75GREDUCING COUPLINGS 90x63mm 512.90GREDUCING COUPLINGS 90x75mm 512.90HREDUCING COUPLINGS 110x75mm 512.11HREDUCING COUPLINGS 110x90mm 512.11I


MALE ADAPTORSMALE ADAPTORS 16x3/8" 511.16AMALE ADAPTORS 16x 1/2" 511.16BMALE ADAPTORS 16 x 3/4" 511.16CMALE ADAPTORS 20 x 1/2" 511.20BMALE ADAPTORS 20 x 3/4" 511.20CMALE ADAPTORS 25 x 1/2" 511.25BMALE ADAPTORS 25 x 3/4" 511.25CMALE ADAPTORS 25 x 1" 511.25DMALE ADAPTORS 32 x 3/4" 511.32CMALE ADAPTORS 32 x 1" 511.32DMALE ADAPTORS 32 x 1 1/4" 511.32EMALE ADAPTORS 40 x 1" 511.40DMALE ADAPTORS 40 x 1 1/4" 511.40EMALE ADAPTORS 40 x 1 1/2" 511.40FMALE ADAPTORS 50 x 1" 511.50DMALE ADAPTORS 50 x 1 1/4" 511.50EMALE ADAPTORS 50 x 1 1/2" 511.50FMALE ADAPTORS 50 x 2" 511.50GMALE ADAPTORS 63 x 1 1/2" 511.63FMALE ADAPTORS 63 x 2" 511.63GMALE ADAPTORS 63 x 2 1/2" 511.63HMALE ADAPTORS 75 x 2" 511.75GMALE ADAPTORS 75 x 2 1/2" 511.75HMALE ADAPTORS 75 x 3" 511.75IMALE ADAPTORS 90 x 2 511.90GMALE ADAPTORS 90 x 2 1/2" 511.90HMALE ADAPTORS 90 x 3" 511.90IMALE ADAPTORS 90 x 4" 511.90LMALE ADAPTORS 110 x 2" 511.11GMALE ADAPTORS 110 x 3" 511.11IMALE ADAPTORS 110 x 4" 511.11L

FEMALE ADAPTORSFEMALE ADAPTORS 16 x 3/8" 601.16AFEMALE ADAPTORS 16 x 1/2" 601.16BFEMALE ADAPTORS 20 x 1/2" 601.20BFEMALE ADAPTORS 20 x 3/4" 601.20CFEMALE ADAPTORS 25 x 1/2" 601.25BFEMALE ADAPTORS 25 x 3/4' 601.25CFEMALE ADAPTORS 25 x 1" 601.25DFEMALE ADAPTORS 32 x 1/2' 601.32BFEMALE ADAPTORS 32 x 3/4" 601.32CFEMALE ADAPTORS 32 x 1" 601.32DFEMALE ADAPTORS 32 x 1 1/4" 601.32EFEMALE ADAPTORS 40 x 1" 601.40DFEMALE ADAPTORS 40 x 1 1/4" 601.40EFEMALE ADAPTORS 40 x 1 1/2" 601.40FFEMALE ADAPTORS 50 x 1 1/4" 601.50EFEMALE ADAPTORS 50 x 1 1/2" 601.50FFEMALE ADAPTORS 50 x 2" 601.50GFEMALE ADAPTORS 63 x 1 1/2" 601.63FFEMALE ADAPTORS 63 x 2" 601.63GFEMALE ADAPTORS 75 x 2" 601.75GFEMALE ADAPTORS 75 x 2 1/2" 601.75HFEMALE ADAPTORS 90 x 2" 601.90GFEMALE ADAPTORS 90 x 2 1/2" 601.90HFEMALE ADAPTORS 90 x 3" 601.90IFEMALE ADAPTORS 110 x 3" 601.11IFEMALE ADAPTORS 110 x 4" 601.11L

EQUAL TEESEQUAL TEES 16mm 514.160EQUAL TEES 20mm 514.200EQUAL TEES 25mm 514.250EQUAL TEES 32mm 514.320EQUAL TEES 40mm 514.400EQUAL TEES 50mm 514.500EQUAL TEES 63mm 514.630EQUAL TEES 75mm 514.750EQUAL TEES 90mm 514.900EQUAL TEES 110mm 514.110

PN16: 16mm - 63mm | PN10: 75mm - 110mm

1.4 comPrESSIon fIttInGS tEcHnIcAL InformAtIon

M arley proudly distributes an extensive range of Astore polypropylene compres-sion fittings which are designed for use

with high density polyethylene (HDPE) pipes ded-icated to fluid reticulation. They can be used in ir-rigation and drinking water systems, and include many items suitable for a very wide range of plant engineering installation requirements.

Marley and Astore are both ISO 9001 certified companies andAstore is a proud member of the Irrigation Association (IA).Astore compressionfittingsareapprovedbyDVGW(DW-8616BQ0078).

Marley’srangeofAstorecompressionfittingsisavailableinsizesfrom16mmup to110mm.All fittingsprovidedwith female threadhave stainless steel reinforcement on sizes of 1 ¼” or larger.

MarleyAstore compression fittings are manufactured in compli-ance with the requirements of standards ISO 3458, ISO 3459, ISO 3501, ISO 3503, ISO 14236, DIN 8076-3, UNI 9561 and carry the SABS 14236mark of approval. The range of fittings can be in-stalled on PE pipes that are in compliance with standards SANS 4427, ISO 3607, DIN 8072, DIN 8074, UNI 10910, and UNI EN 12201.ThethreadedfittingsaremanufacturedincompliancewithISO R7.

Table 1.89 Marley Compression Fittings

1 PRODUct INFORMAtION - cOMPRESSION FIttINgS

69



EQUAL ELBOWSEQUAL ELBOWS 16mm 513.160EQUAL ELBOWS 20mm 513.200EQUAL ELBOWS 25mm 513.250EQUAL ELBOWS 32mm 513.320EQUAL ELBOWS 40mm 513.400EQUAL ELBOWS 50mm 513.500EQUAL ELBOWS 63mm 513.630EQUAL ELBOWS 75mm 513.750EQUAL ELBOWS 90mm 513.900EQUAL ELBOWS 110mm 513.110

FEMALE ELBOWSFEMALE ELBOWS 16 x 3/8" 518.16AFEMALE ELBOWS 16 x 1/2" 518.16BFEMALE ELBOWS 20 x 1/2" 518.20BFEMALE ELBOWS 20 x 3/4" 518.20CFEMALE ELBOWS 25 x 1/2" 518.25BFEMALE ELBOWS 25 x 3/4" 518.25CFEMALE ELBOWS 25 x 1" 518.25DFEMALE ELBOWS 32 x 1/2" 518.32BFEMALE ELBOWS 32 x 3/4" 518.32CFEMALE ELBOWS 32 x 1" 518.32DFEMALE ELBOWS 32 x 1 1/4" 518.32EFEMALE ELBOWS 40 x 1 1/4" 518.40EFEMALE ELBOWS 40 x 1 1/2" 518.40FFEMALE ELBOWS 50 x 1 1/2" 518.50FFEMALE ELBOWS 50 x 2" 518.50GFEMALE ELBOWS 63 x 2" 518.63GFEMALE ELBOWS 63 x 2 1/2" 518.63HFEMALE ELBOWS 75 x 2 1/2" 518.75HFEMALE ELBOWS 75 x 3" 518.75IFEMALE ELBOWS 90 x 3" 518.90IFEMALE ELBOWS 90 x 4" 518.90LFEMALE ELBOWS 110 x 4" 518.11L

PLUGSPLUGS 16mm 521.160PLUGS 20mm 521.200PLUGS 25mm 521.250PLUGS 32mm 521.320PLUGS 40mm 521.400PLUGS 50mm 521.500PLUGS 63mm 521.630PLUGS 75mm 521.750PLUGS 90mm 521.900PLUGS 110mm 521.110

FLANGED ADAPTORSFLANGED ADAPTORS 75 x 2 1/2" 520.75HFLANGED ADAPTORS 75 x 3" 520.75IFLANGED ADAPTORS 90 x 3" 520.90IFLANGED ADAPTORS 90 x 4" 520.90LFLANGED ADAPTORS 110 x 5" 520.11L

PN16: 16mm - 63mm | PN10: 75mm - 110mm


INCREASING TEESINCREASING TEES 20mm 514.20CINCREASING TEES 25mm 514.25D

FEMALE TEESFEMALE TEES 16 x 3/8" 515.16AFEMALE TEES 16 x 1/2" 515.16BFEMALE TEES 20 x 1/2" 515.20BFEMALE TEES 20 x 3/4" 515.20CFEMALE TEES 25 x 1/2" 515.25BFEMALE TEES 25 x 3/4" 515.25CFEMALE TEES 25 x 1" 515.25DFEMALE TEES 32 x 1/2" 515.32BFEMALE TEES 32 x 3/4" 515.32CFEMALE TEES 32 x 1" 515.32DFEMALE TEES 32 x 1 1/4" 515.32EFEMALE TEES 40 x 1" 515.40DFEMALE TEES 40 x 1 1/4" 515.40EFEMALE TEES 40 x 1 1/2" 515.40FFEMALE TEES 50 x 1 1/2" 515.50FFEMALE TEES 50 x 2" 515.50GFEMALE TEES 63 x 2" 515.63GFEMALE TEES 63 x 2 1/2" 515.63HFEMALE TEES 75 x 2 1/2" 515.75HFEMALE TEES 75 x 3" 515.75IFEMALE TEES 90 x 3" 515.90IFEMALE TEES 90 x 4" 515.90LFEMALE TEES 110 x 4" 515.11L

MALE TEESMALE TEES 16 x 1/2" 516.16BMALE TEES 20 x 1/2" 516.20BMALE TEES 20 x 3/4" 516.20CMALE TEES 25 x 3/4" 516.25CMALE TEES 25 x 1" 516.25DMALE TEES 32 x 1" 516.32DMALE TEES 32 x 1 1/4" 516.32EMALE TEES 40 x 1 1/4" 516.40EMALE TEES 40 x 1 1/2" 516.40FMALE TEES 50 x 1 1/2" 516.50FMALE TEES 50 x 2" 516.50GMALE TEES 63 x 2" 516.63GMALE TEES 63 x 2 1/2" 516.63HMALE TEES 75 x 2 1/2" 516.75HMALE TEES 75 x 3" 516.75IMALE TEES 90 x 3" 516.90IMALE TEES 90 x 4" 516.90LMALE TEES 110 x 4" 516.11L

MALE ELBOWSMALE ELBOWS 16 x 1/2" 519.16BMALE ELBOWS 20 x 1/2" 519.20BMALE ELBOWS 20 x 3/4" 519.20CMALE ELBOWS 25 x 1/2" 519.25BMALE ELBOWS 25 x 3/4" 519.25CMALE ELBOWS 25 x 1" 519.25DMALE ELBOWS 32 x 1" 519.32DMALE ELBOWS 32 x 1 1/4" 519.32EMALE ELBOWS 40 x 1 1/4" 519.40EMALE ELBOWS 40 x 1 1/2" 519.40FMALE ELBOWS 50 x 1 1/2" 519.50FMALE ELBOWS 50 x 2" 519.50GMALE ELBOWS 63 x 2" 519.63GMALE ELBOWS 63 x 2 1/2" 519.63HMALE ELBOWS 75 x 2 1/2" 519.75HMALE ELBOWS 75 x 3" 519.75IMALE ELBOWS 90 x 3" 519.90IMALE ELBOWS 90 x 4" 519.90LMALE ELBOWS 110 x 4" 519.11L


Table 1.89 Marley Compression Fittings (Continued)

70



COUPLINGSCOUPLING 16mm 97711100COUPLING 20mm 97712200COUPLING 25mm 97713300COUPLING 32mm 97714400COUPLING 40mm 97715500COUPLING 50mm 97716600COUPLING 63mm 97717700COUPLING 75mm 97718800COUPLING 90mm 97719900COUPLING 110mm 97710000

REDUCING COUPLINGREDUCING COUPLING 20 x 16mm 97712100REDUCING COUPLING 25 x 20mm 97713200REDUCING COUPLING 32 x 20mm 97714200REDUCING COUPLING 32 x 25mm 97714300REDUCING COUPLING 40 x 25mm 97715300REDUCING COUPLING 40 x 32mm 97715400REDUCING COUPLING 50 x 25mm 97716300REDUCING COUPLING 50 x 32mm 97716400REDUCING COUPLING 50 x 40mm 97716500REDUCING COUPLING 63 x 32mm 97717400REDUCING COUPLING 63 x 40mm 97717500REDUCING COUPLING 63 x 50mm 97717600REDUCING COUPLING 75 x 63mm 97718700REDUCING COUPLING 90 x 75mm 97719800REDUCING COUPLING 110 x 90mm 97710900

MALE ADAPTORMALE ADAPTOR 16 x 1/2" 97721100MALE ADAPTOR 16 x 3/4" 97721200MALE ADAPTOR 20 x 1/2" 97722100MALE ADAPTOR 20 x 3/4" 97722200MALE ADAPTOR 20 x 1 " 97722300MALE ADAPTOR 25 x 1/2" 97723100MALE ADAPTOR 25 x 3/4" 97723200MALE ADAPTOR 25 x 1" 97723300MALE ADAPTOR 32 x 3/4" 97724200MALE ADAPTOR 32 x 1" 97724300MALE ADAPTOR 32 x 1 1/4" 97724400MALE ADAPTOR 32 x 1 1/2" 97724500MALE ADAPTOR 40 x 1" 97725300MALE ADAPTOR 40 x 1 1/4" 97725400MALE ADAPTOR 40 x 1 1/2" 97725500MALE ADAPTOR 40 x 2" 97725600MALE ADAPTOR 50 x 1 1/2" 97726500MALE ADAPTOR 50 x 2" 97726600MALE ADAPTOR 63 x 1/2" 97727500MALE ADAPTOR 63 x 2" 97727600MALE ADAPTOR 75 x 2" 97728600MALE ADAPTOR 75 x 3" 97728800MALE ADAPTOR 90 x 3" 97729800MALE ADAPTOR 110 x 4" 97720900


FEMALE ADAPTORFEMALE ADAPTOR 16 x 1/2" 97781100FEMALE ADAPTOR 16 x 3/4" 97781200FEMALE ADAPTOR 20 x 1/2" 97782100FEMALE ADAPTOR 20 x 3/4" 97782200FEMALE ADAPTOR 20 x 1" 97782300FEMALE ADAPTOR 25 x 1/2" 97783100FEMALE ADAPTOR 25 x 3/4" 97783200FEMALE ADAPTOR 25 x 1" 97783300FEMALE ADAPTOR 32 x 1" 97784300FEMALE ADAPTOR 32 x 1 1/4" 97784400FEMALE ADAPTOR 40 x 1 1/4" 97785400FEMALE ADAPTOR 40 x 1 1/2" 97785500FEMALE ADAPTOR 50 x 1 1/2" 97786500FEMALE ADAPTOR 50 x 2" 97786600FEMALE ADAPTOR 63 x 2" 97787600FEMALE ADAPTOR 75 x 2" 97788600FEMALE ADAPTOR 90 x 3" 97789800FEMALE ADAPTOR 110 x 4" 97780900

EQUAL TEESEQUAL TEES 16mm 97731100EQUAL TEES 20mm 97732200EQUAL TEES 25mm 97733300EQUAL TEES 32mm 97734400EQUAL TEES 40mm 97735500EQUAL TEES 50mm 97736600EQUAL TEES 63mm 97737700EQUAL TEES 75mm 97738800EQUAL TEES 90mm 97739900EQUAL TEES 110mm 97730000

REDUCING TEESREDUCING TEES 25 x 20mm 97733200REDUCING TEES 32 x 25mm 97734300REDUCING TEES 50 x 40mm 97736500REDUCING TEES 63 x 50mm 97737600

INCREASING TEEINCREASING TEE 25 x 32mm 97733400

FEMALE TEESFEMALE TEES 16 x 1/2" 97741100FEMALE TEES 20 x 1/2" 97742100FEMALE TEES 20 x 3/4" 97742200FEMALE TEES 25 x 1/2" 97743100FEMALE TEES 25 x 3/4" 97743200FEMALE TEES 25 x 1" 97743300FEMALE TEES 32 x 3/4" 97744200FEMALE TEES 32 x 1" 97744300FEMALE TEES 32 x 1 1/4" 97744400FEMALE TEES 40 x 1 1/4" 97745400FEMALE TEES 40 x 1 1/2" 97745500FEMALE TEES 50 x 1 1/2" 97746500FEMALE TEES 50 x 2" 97746600FEMALE TEES 63 x 2" 97747600FEMALE TEES 75 x 2" 97748600FEMALE TEES 90 x 3" 97749800FEMALE TEES 110 x 4" 97740900

PN16: 16mm - 63mm | PN10: 16mm - 110mm

Table 1.90 Philmac Compression Fittings


71



MALE TEESMALE TEES 25 x 1/2" 97793100MALE TEES 25 x 3/4" 97793200

90° ELBOWS90° ELBOWS 16mm 9775110090° ELBOWS 20mm 9775220090° ELBOWS 25mm 9775330090° ELBOWS 32mm 9775440090° ELBOWS 40mm 9775550090° ELBOWS 50mm 9775660090° ELBOWS 63mm 9775770090° ELBOWS 75mm 9775880090° ELBOWS 90mm 9775990090° ELBOWS 110mm 97750000

FEMALE ELBOWSFEMALE ELBOWS 16 x 1/2" 97761100FEMALE ELBOWS 20 x 1/2" 97762100FEMALE ELBOWS 20 x 3/4" 97762200FEMALE ELBOWS 25 x 1/2" 97763100FEMALE ELBOWS 25 x 3/4" 97763200FEMALE ELBOWS 25 x 1" 97763300FEMALE ELBOWS 32 x 1" 97764300FEMALE ELBOWS 32 x 1 1/4" 97764400FEMALE ELBOWS 40 x 1 1/4" 97765400FEMALE ELBOWS 40 x 1 1/2" 97765500FEMALE ELBOWS 50 x 1 1/2" 97766500FEMALE ELBOWS 50 x 2" 97766600FEMALE ELBOWS 63 x 2" 97767600FEMALE ELBOWS 75 x 2" 97768600FEMALE ELBOWS 90 x 3" 97769800FEMALE ELBOWS 110 x 4" 97760900

MALE ELBOWSMALE ELBOWS 25 x 3/4" 97773200MALE ELBOWS 32 x 1" 97774300

END CAPEND CAP 16mm 97701900END CAP 20mm 97702900END CAP 25mm 97703900END CAP 32mm 97704900END CAP 40mm 97705900END CAP 50mm 97706900END CAP 63mm 97707900END CAP 75mm 97708900END CAP 90mm 97709900END CAP 110mm 97700900

BLANKING PLUG SETBLANKING PLUG SET 25mm 97703300BLANKING PLUG SET 32mm 97704400BLANKING PLUG SET 50mm 97706600BLANKING PLUG SET 63mm 97707700

SLIP COUPLINGSLIP COUPLING 20mm 97112200SLIP COUPLING 25mm 97113300SLIP COUPLING 32mm 97114400SLIP COUPLING 40mm 97115500SLIP COUPLING 50mm 97116600SLIP COUPLING 63mm 97117700


FLANGED ADAPTORFLANGED ADAPTOR 50mm x 2" 97776600FLANGED ADAPTOR 63mm x 2" 97777600FLANGED ADAPTOR 75mm x 3" 97778800FLANGED ADAPTOR 90mm x 3" 97779800FLANGED ADAPTOR 110mm x 4" 97770900

THREADED BSP FITTINGS - PLUGSPLUG - 15mm - 1/2" 90401100PLUG - 20mm - 3/4" 90402200PLUG - 25mm - 1" 90403300

PLUG - 32mm- 1 1/4" 90404400PLUG - 40mm - 1 1/2" 90405500

PLUG - 50mm - 2" 90406600THREADED BSP FITTINGS - BUSHES

BUSH - 20mm x 15mm - 3/4" x 1/2" 90412100BUSH - 25mm x 15mm - 1" x 1/2" 90413100BUSH - 25mm x 20mm - 1 x 3/4" 90413200

BUSH - 32mm x 15mm - 1 1/4" x 1/2" 90414100BUSH - 32mm x 20mm - 1 1/4" x 3/4" 90414200BUSH - 32mm x 25mm - 1 1/4" x 1" 90414300

BUSH - 40mm x 15mm - 1 1/2" x 1/2" 90415100BUSH - 40mm x 20mm - 1 1/2" x 3/4" 90415200BUSH - 40mm x 25mm - 1 1/2" x 1" 90415300

BUSH - 40mm x 32mm - 1 1/2" x 1 1/4" 90415400BUSH - 50mm x 15mm - 2" x 1/2" 90416100BUSH - 50mm x 2mm - 2" x 3/4" 90416200BUSH - 50mm x 25mm - 2" x 1" 90416300

BUSH - 50mm x 32mm - 2" x 1 1/4" 90416400BUSH - 50mm x 40mm - 2" x 1 1 /2" 90416500

THREADED BSP FITTINGS - NIPPLESNIPPLES - 15 - 1/2" 90421100NIPPLES - 20 - 3/4" 90422200NIPPLES - 25 - 1" 90423300

NIPPLES - 32 - 1 1/4" 90424400NIPPLES - 40 - 1 1/2" 90425500

NIPPLES - 50 - 2" 90426600REDUCING NIPPLES

REDUCING NIPPLES - 20 x 15 3/4 x 1/2" 90422100REDUCING NIPPLES - 25 x 15 - 1 x 1/2" 90423100REDUCING NIPPLES - 25 x 20 - 1 x 3/4" 90423200

REDUCING NIPPLES - 32 x 20 1 1/4" x 3/4" 90424200REDUCING NIPPLES - 32 x 25 - 1 1/4" x 1" 90424300

REDUCING NIPPLES - 50 x 25 = 2" x 1" 90426300REDUCING NIPPLES - 50 x 40 - 2" x 1 1/2" 90426500THREADED BSP FITTINGS - SOCKETS

SOCKETS - 15mm - 1/2" 90431100SOCKETS - 20mm - 3/4" 90432200

REDUCING SOCKETSREDUCING SOCKETS - 20mm x 15mm 90432100

- 3/4" x 1/2"REDUCING SOCKETS - 50mm x 25mm 90436300

- 2" x 1"PN16: 16mm - 110mm


Table 1.90 Philmac Compression Fittings (Continued)

72


1.5 mAGnum SAddLES tEcHnIcAL InformAtIon

NO. DESCRIPTION MATERIAL QUANTITY

1 Reinforcing ring Stainless steel 304 1 (not provided for holderbat)

2 Sealing gasket Nitrile rubber 1

3 Body Polypropylene 1

4 Nut & bolt Zinc electroplated steel

25-32mm Ø 2

40-110mm Ø 4

160mm Ø 6

Table 1.91 Magnum Saddle parts & materials

Table 1.92 Magnum Saddle parts & materials dimensions

SADDLE SIZE BOLT A B C D

25 M8 x 45 82 54 19 43

32 M8 x 45 92 66 22 46

40 M8 x 45 96 67 29 50

50 M8 x 45 115 80 34 54

63 M8 x 55 126 89 46 66

75 M10 x 65 141 99 49 74

90 M10 x 65 160 104 59 86

110 M10 x 65 181 108 69 90

160 M10 x 85 230 118 99 127

1. The hole for a support bolt (not supplied) in the holderbat is 14mm.2. The female BSP thread in the branch of the saddle is manufactured to ISO R7.

Gasket is compressedonto pipe surface andprovides leaktightsealing to scuffed orscratched pipe

Rounded body shapeprevents deformationof pipe duringassembly

Robust saddle tower design

A

Stainless steel reinforcingring provides superiorthread support (notsupplied for holderbat)

Clips prevent boltfrom displacingduring assembly

Hexagonal grooveprevents boltsfrom turning whentightening nut

Reinforcing ribs

B

C

D

1.5.1 features• PN16pressureratingsat20°C• Nitrilesealinggasketforexcellentsealingperformanceand chemical resistance• Suitableforcontactwithpotablewater• Highgradepolypropylenebodyselectedforitstough,high impact, lightweight and durable properties• Stainlesssteelreinforcingringsonthreadedbranchnot supplied for holderbats• Boltclipstofacilitateeasyassembly• Hexagonmouldingtopreventboltturningduringassembly• Suppliedwithzincelectroplatedsteelboltsandnuts (stainless steel available on request)• Thethreadedbranchofsaddlescanbesuppliedwitha threaded brass insert on request

Table 1.93 Magnum Saddles

PRODUCT PRODUCT DESCRIPTION PN NO. OF

BOLTS CODE

MAGNUM SADDLES Ø2525X1/2" MAGNUM SADDLE PN16 2 0872025125X3/4" MAGNUM SADDLE PN16 2 08720252

MAGNUM SADDLES Ø3232X1/2" MAGNUM SADDLE PN16 2 0872032132X3/4" MAGNUM SADDLE PN16 2 0872032232X1" MAGNUM SADDLE PN16 2 08720323




63X1 1/4" MAGNUM SADDLE PN16 4 0872063463X1 1/2" MAGNUM SADDLE PN16 4 08720635



75X2" MAGNUM SADDLE PN16 4 08720756MAGNUM SADDLES Ø90

90X1/2" MAGNUM SADDLE PN16 4 0872090190X3/4" MAGNUM SADDLE PN16 4 0872090290X1" MAGNUM SADDLE PN16 4 08720903



110X1/2" MAGNUM SADDLE PN16 4 08721101110X3/4" MAGNUM SADDLE PN16 4 08721102110X1" MAGNUM SADDLE PN16 4 08721103



160X3/4" MAGNUM SADDLE PN16 6 08721602160X1" MAGNUM SADDLE PN16 6 08721603


160X2" MAGNUM SADDLE PN16 6 08721606

1 PRODUct INFORMAtION - MAgNUM SADDLES

73


Marley offers an extensive range of electrofu-sion and spigot fittings for pressurised gas

and water pipelines in civil and industrial appli-cations. Manufactured on the principles of total quality, absolute safety and respect for the envi-ronment, Marley delivers products of the highest level of safety and reliability to exceed customer expectations.

Marley supplies electrofusion and spigot fittings in sizes from20mm to 1200mm, pressure capabilities range from PN5 - PN25. AllelectrofusionfittingsareguaranteedforweldingonbothPE80and PE 100 pipelines.

The electrofusion welding system is now considered the most highlydevelopedandsafemethodforjoiningpolyethylenepipes.Thanks to its versatility, electrofusion can be used to weld together pipesorfittingsfromdifferentpolyethylenematerialsanddifferentthicknessesaslongasthereiscompatibilityofmeltflowindexandraw material density.

Marley electrofusion and spigot fittings conform to internationalstandards and undergo both destructive and non-destructive test-ingtoensureultimatequalityforprojectinstallations.

1.6.1 Electrofusion Jointing

Theelectrofusionweldingsystemisthe jointingprocessofpipesand/orfittingsofthesameconnectiondiameter,andiscarriedoutby fusion of the contact surfaces through an electrical resistance insertedintheelectrofusionfitting.Todayitisconsideredthemostdeveloped and safe method for realising polyethylene jointings.Thanks to its versatility, electrofusion can weld together pipes and/orfittingswithdifferentthicknessesandmadewithdifferentpoly-ethylene materials.

Table 1.94 Slide-over couplers, SDR 11 | Maximum working pres-sure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

d Order Ref. Stock-status BX PU D L Weight

kg/each

20 612660 1 110 3.520 33 60 0,037

25 612661 1 120 3.840 38 66 0,044

32 612662 1 60 1.920 45 77 0,064

40 612663 1 40 1.280 54 86 0,096

50 612664 1 25 800 68 98 0,151

63 612665 1 15 480 82 112 0,225

75 612666 1 50 400 98 122 0,322

90 612667 1 30 240 114 138 0,436

110 612668 1 24 192 137 159 0,705

125 612669 1 16 128 156 172 0,946

140 615001 1 12 96 174 184 1,270

160 612671 1 8 64 199 190 1,772

180 612672 1 6 48 220 210 2,088

200 612673 1 1 56 247 220 2,798

225 612674 1 1 36 277 236 3,950

250 612675 1 1 24 315 246 5,800

280 615073 1 1 18 347 285 7,740

315 612670 1 1 18 390 300 10,040

355 615074 1 1 9 445 300 14,600

400 615075* 1 1 4 500 320 20,800

450 615076* 1 1 4 560 340 30,000

500 615124* 1 1 4 630 360 39,800

560 616312* 2 1 2 715 380 55,000

630 616269* 2 1 2 810 420 79,600

710 616313* 2 1 1 900 420 101,000

800 616314* 2 1 1 1000 500 138,800

900 616440* 2 1 1 1130 600 210,300

With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. With one indicator per

fusion zone for visual fusion control.

Diameter d 400 and bigger with pre-heating technology (d 400 – d 450 optional use; d 500 – d 900 required).Special sizes, pressure stages and designs on request

*Separate fusion zones

1.6 ELEctrofuSIon tEcHnIcAL InformAtIon

1 PRODUct INFORMAtION - ELEctROFUSION

74


Table 1.95 Couplers with removable stop | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

Table 1.96 Slide-over couplers, SDR 17 | Maximum working pressure 10 bar (water) | PE 100 | SDR 17

d Order Ref. Stock-status BX PU D L Weight kg/each

20 612680 1 110 3520 33 60 0,040

25 612681 1 90 2880 38 66 0,050

32 612682 1 60 1920 45 78 0,064

40 612683 1 40 1280 54 85 0,100

50 612684 1 25 800 68 98 0,150

63 612685 1 15 480 82 110 0,221

75 612686 1 50 400 98 122 0,320

90 612687 1 30 240 114 138 0,440

110 612688 1 24 192 137 159 0,710

125 612689 1 16 128 156 172 0,950

140 612690 1 12 96 174 184 1,270

160 612691 1 8 64 199 190 1,770

Can also be used as repair couplers. With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. With one indicator per fusion zone for visual fusion control.

d Order Ref. Stock-status BX PU D L t Weight kg/each

110 680001 1 24 192 130 160 80 0,600

125 680013 1 22 176 146 160 80 0,620

160 680002 1 12 96 184 180 90 1,100

180 680003 1 8 64 207 180 90 1,700

200 680004 1 1 75 236 180 90 2,010

225 680005 1 1 52 263 200 100 2,640

250 680006 1 1 33 282 220 110 3,100

280 680007 1 1 32 316 220 110 3,700

315 680008 1 1 24 355 220 110 4,900

355 680009 1 1 24 400 220 110 6,100

400 680010 1 1 12 450 220 110 7,850

450 680011 1 1 6 506 270 135 8,400

500 680012* 1 1 4 562 270 135 14,900

With exposed heating coils for optimal heat transfer, large insertion depth, extra wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material for use without holding devices. With fusion indicator for visual fusion control.


L

D

t

d1 PRODUct INFORMAtION - ELEctROFUSION

75


Table 1.97 Slide-over couplers, SDR 17 | Maximum working pressure 10 bar (water)/5 bar (gas) | PE 100 | SDR 17

Table 1.98 Slide-over couplers, SDR 7.4 | Maximum working pressure 25 bar (water) | PE 100 | SDR 7.4


560 615706* 1 1 2 630 380 24,800

630 615726* 1 1 2 710 420 36,800

710 615994* 1 1 2 800 420 48,600

800 616290* 1 1 1 900 500 65,900

900 616345* 1 1 1 1024 500 91,500

1000 616403* 1 1 1 1130 610 121,000

1200 616416* 1 1 1 1356 670 205,000

With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. With one indicator per fusion zone for visual fusion control. The UB d 1000 and above can only be fused with the FRIAMAT XL.

Diameter d 560 - d 900 with pre-heating technology which is required for installation.

Special sizes, pressure stages and designs on request



90 616270 2 30 240 117 138 0,530

110 616271 2 24 192 142 159 0,870

125 616272 2 16 128 160 172 1,230

140 616273 2 12 96 181 184 1,640

160 616274 2 8 64 206 203 2,360

180 616282 2 6 48 225 210 2,700

200 616283 2 2 36 250 224 3,610

225 616284 2 1 33 280 240 4,900

250 616285 2 1 24 315 246 6,700

280 616286* 2 1 18 355 268 9,300

315 616287* 2 1 18 400 285 12,100

355 616288* 2 1 9 450 300 16,700

With exposed heating coils for optimal heat transfer, large insertion depth, extra wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material for use without holding devices. With fusion indicator for visual fusion control.


L

D

t

d1 PRODUct INFORMAtION - ELEctROFUSION

76


Table 1.99 Slide-over couplers, SDR 9 | Maximum working pressure 20 bar (water), 10 bar (gas) | PE 100 | SDR 9

Table 1.100 Long Couplers with removable center stop | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100SDR 119

Table 1.102 Relining slide-over couplers | Maximum working pressure 10 bar (water)/5 bar (gas) | PE 100 | SDR 17

Table 1.101 Conical ring couplers PE 100 | SDR 17


400 616441* 1 1 4 500 320 20,800

450 616447* 1 1 4 560 340 30,000

500 616445* 1 1 4 630 360 40,000

560 616446* 2 1 2 715 380 55,000

630 616439* 2 1 2 810 420 79,600

With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. With one indicator per fusion zone for visual

fusion control.

With pre-heating technology (d 400 – d 450 optional use; d 500 – d 630 required).Special sizes, pressure stages and designs on request



32 615736 1 40 1280 45 136 0,110

40 615737 1 30 960 54 146 0,140

50 615608 1 16 512 68 175 0,250

63 615738 1 10 320 82 197 0,370

The coupler with more safety aspects. With exposed heating coils for optimal heat transfer, extra large insertion depth, extra wide fusion zones plus cold zones at the end. For best possible pipe installation and tension-free fusion without holding devices. With

one indicator per fusion zone for visual fusion control.

d/DN Order Ref. Stock-status BX PU D L Weight kg/each

110/100 615569 2 24 192 127 150 0,680

160/150 615571 2 12 96 180 180 1,540

315/300 615576 2 1 18 355 285 7,950

400/375 616344 2 1 9 450 300 12,315

For connection from relining pipe to standard pipe. With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without

holding devices. Gap reduction between coupler and pipe possible through special preheating barcode. For processing refer to relining installation instructions. For processing refer to the FRIALEN XL-Assembly Instructions for laying large pipes and relining

pipe networks.

With pre-heating barcode


1000 616434 2 1 1 1245 1125 350,000

1200 616435 2 1 1 1450 1250 500,000

Easy and quick assembly, also as slide-over coupler and given limited space. Variable diameter range to bridge large tolerance conditions of the outer pipe diameter and out-of-roundness. With flexible fusion conical ring for easy assembly given pronounced pipe out-of-roundness. The installation is made without fixing device and rounding clamp. Mechanical minimisation of the joint gap thanks to flex ring system. Integrated tensioning device for assembly and gap minimisation. Exposed, fixed heating coil, for optimal heat transfer during

fusion, broad fusion zones as well as melt flow-inhibiting cold zones at the fronts and the centre for improved pipe guidance and prevention of melt release.

The KM-XL can only be fused with the FRIAMAT XL with Y connector (see Product Range FRIATOOLS).

Other dimensions or permissible fitting operating pressures as well as special dimensions on request.

L

D d


77


Table 1.103 End caps | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

Table 1.104 Electrofusion reducers | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11


20 612025 2 40 2000 31 62 0,035

25 612026 2 40 2000 35 65 0,040

32 612027* 1 40 1280 44 70 0,060

40 612028* 1 25 800 55 75 0,090

50 612029 1 20 640 67 80 0,125

63 612030 1 15 480 84 88 0,210

75 612031 1 20 640 99 99 0,319

90 612032 1 16 288 117 155 0,529

110 612033 1 12 216 143 125 0,850

125 612034 1 8 144 158 186 1,380

160 612035 1 10 60 206 262 2,362

180 616183 1 6 48 225 195 2,800

200 616184 1 4 32 250 210 3,700

225 616185 1 4 32 280 230 5,050

With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end to prevent the flow of molten material, for use without holding devices. With fusion indicators for visual fusion control.

*Also recommended as fused caps for the dome of FRIALEN-Pressure Tapping Tees DAA/DAP ≤ d63.

d1 d2 Order Ref. Stock-status BX PU D1/D2 L Weight kg/each

32 16 616452 2 45/ 28 90 0,060

32 20 615386 1 80 2560 45/ 32 88 0,060

32 25 615502 1 70 2240 45/ 38 88 0,070

40 20 615387 1 60 1920 54/ 32 98 0,080

40 32 615388 1 50 1600 54/ 45 98 0,090

50 20 612069 2 32 1024 68/ 32 110 0,130

50 32 612070 1 32 1024 68/ 45 110 0,140

50 40 612071 1 25 800 68/ 54 110 0,140

63 32 615389 1 18 576 82/ 45 125 0,210

63 40 615390 1 16 512 82/ 54 125 0,220

63 50 612072 1 16 512 82/ 68 125 0,230

90 50 615391 1 15 270 117/ 68 160 0,470

90 63 615392 1 15 270 117/ 82 160 0,510

110 63 615393 1 10 180 142/ 82 160 0,730

110 90 615693 1 8 144 140/115 180 0,900

125 90 615694 1 8 144 155/115 200 0,980

160 110 615695 1 8 64 201/140 230 1,990

225 160 616356 1 1 36 282/203 270 4,860

With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices.


78


Table 1.105 Long Couplers with integrated Mertik Maxitrol excess flow valve | Maximum working pressure type Z, B: 5 bar (gas), type D: 1 bar (gas) | PE 100 | SDR 11

Table 1.106 Long Couplers with integrated Pipelife Gas-StopTM system | Maximum working pressure type U, Uue, S: 5 bar (gas), Typ A/D: 1 bar (gas) | PE 100 | SDR 11

d Type Order Ref. Operating pressure range pmin - pmax VN Stock- status BX PU D L Weight kg/

each

32 Z 616187 35 mbar - 5 bar 17 - 40 1 40 1280 45 136 0,140

40 Z 616188 35 mbar - 5 bar 26 - 62 1 30 960 54 146 0,220

50 Z 616189 35 mbar - 5 bar 41 - 99 1 16 512 68 175 0,380

63 Z 616190 35 mbar - 5 bar 66 - 158 1 10 320 82 197 0,530

32 D 616191 25 mbar - 1 bar 11 - 16 1 40 1280 45 136 0,140

32 B 616192 100 mbar - 5 bar 26 - 60 1 40 1280 45 136 0,140

40 D 616193 25 mbar - 1 bar 19 - 27 1 30 960 54 146 0,220

40 B 616194 100 mbar - 5 bar 39 - 90 2 30 960 54 146 0,220

50 D 616195 25 mbar - 1 bar 28 - 40 1 16 512 68 175 0,380

50 B 616196 100 mbar - 5 bar 58 - 135 2 16 512 68 175 0,380

63 D 616197 25 mbar - 1 bar 51 - 72 1 10 320 82 197 0,530

63 B 616198 100 mbar - 5 bar 94 - 219 2 10 320 82 197 0,530

FRIALONG long coupler with integrated SENTRY GS safety equipment which automatically shuts down gas flow in the event of pipe damage caused e.g. by digging or tapping. Exposed heating coils for optimum heat transfer, large insertion depth, wide fusion zones as well as cold zones preventing molten escape at the front and in the centre for processing without

holding device. The universal type Z meets all practical requirements of the operating pressure range and the required flow quantity. Type D and Z with overflow.DVGW test certificate for Sentry GS excess flow valve: DG-4360BO0438

d Type Order Ref. Operating pressure range pmin - pmax VN Stock- status BX PU D L Weight kg/

each

15 - 35 U 616199 35 mbar - 5 bar 15 - 35 1 40 1280 45 136 0,140

15 - 35 Uue 616200 35 mbar - 5 bar 15 - 35 1 40 1280 45 136 0,140

35 - 80 U 616201 35 mbar - 5 bar 35 - 80 2 20 640 68 175 0,350

35 - 80 Uue 616202 35 mbar - 5 bar 35 - 80 1 20 640 68 175 0,350

55 - 120 U 616203 35 mbar - 5 bar 55 - 120 2 12 384 82 197 0,560

55 - 120 Uue 616204 35 mbar - 5 bar 55 - 120 1 12 384 82 197 0,560

10 - 14 A/D 616205 25 mbar - 1 bar 10 - 14 1 40 1280 45 136 0,140

25 - 35 A/D 616207 25 mbar - 1 bar 25 - 35 1 20 640 68 175 0,350

40 - 55 A/D 616209 25 mbar - 1 bar 40 - 55 1 12 384 82 197 0,560

36 - 80 S 616339 200 mbar - 5 bar 36 - 80 1 40 1280 45 136 0,140

110 - 240 S 616340 200 mbar - 5 bar 110 - 240 2 20 640 68 175 0,350

180 - 400 S 616341 200 mbar - 5 bar 180 - 400 2 12 384 82 197 0,560

FRIALONG long coupler with integrated Gas-StopTM safety equipment which automatically shuts down gas flow in the event of pipe damage caused e.g. by digging or tapping. Exposed heating coils for optimum heat transfer, large insertion depth, wide fusion zones as well as cold zones preventing molten escape at the front and in the centre for processing without holding device. The universal type U meets all practical requirements of the operating pressure range and the required flow quantity. Type A/D, S and Uue with overflow. DVGW test

certificate for Gas-StopTM: DG-4360BP0060

L

dD

B

dD1 PRODUct INFORMAtION - ELEctROFUSION

79


Table 1.107 Electrofusion Reducers with integrated Mertik Maxitrol excess flow valve | Maximum working pressure Type Z: 5 bar (gas), Type D: 1 bar (gas) | PE 100 | SDR 11

Table 1.108 LI/A Elbows 11° | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

Table 1.109 Elbows 30° | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

d1 d2 Type Order Ref.

Operating pressure range pmin - pmax VN Stock- status BX PU D1/D2 L Weight kg/

each

d1 40 Z 616218 35 mbar - 5 bar 26 - 62 2 12 600 68/54 110 0,210

50 40 D 616237 25 mbar - 1 bar 19 - 27 2 12 600 68/54 110 0,210

50 32 Z 616219 35 mbar - 5 bar 17 - 40 1 18 576 82/45 125 0,240

63 32 D 616238 25 mbar - 1 bar 11 – 16 2 18 576 82/45 125 0,240

63 40 Z 616220 35 mbar - 5 bar 26 - 62 2 16 512 82/54 125 0,290

63 40 D 616239 25 mbar - 1 bar 19 - 27 2 16 512 82/54 125 0,290

63 50 Z 616221 35 mbar - 5 bar 41 - 99 1 16 512 82/68 125 0,360

63 50 D 616240 25 mbar - 1 bar 28 - 40 1 16 512 82/68 125 0,360

Reducer MR with integrated SENTRY GS safety equipment which automatically shuts down gas flow in the event of pipe damage caused e.g. by digging or tapping. Exposed heating coils for optimum heat transfer, large insertion depth, wide fusion zones as well as cold zones preventing molten escape at the front and in the centre for processing without holding device. The

universal type Z meets all practical requirements of the operating pressure range and the required flow quantity. Type D and Z with overflow.DVGW test certificate for Sentry GS excess flow valve: DG-4360BO0438

D2d2d1

L

D1


110 616139 1 8 144 141 235 0,920

125 616140 1 5 90 160 250 1,250

160 616141 1 8 64 200 295 2,260

180 616142 1 4 32 226 310 3,050

225 616143 1 1 18 280 350 5,280

For universal and stress free changes in direction even in restricted spaces. Optimum flexibility through I/A construction type. Elbows of 22°, 33° etc. can be set up thanks to multiple application. Coupler side with exposed heating coils for optimum heat

transfer, large insertion depth and wide fusion zone. Spigot for processing with FRIALEN MB or UB couplers.


90 615272 1 8 144 115 224 0,780

110 615273 1 6 108 142 252 1,260

125 615274 1 4 72 158 270 1,640

160 615340 1 5 40 199 350 3,870

180 616261 1 3 24 229 390 4,990

200 616262 1 1 18 254 412 6,350

225 616263 1 1 18 281 456 8,220


Dd

11°

d

L


80



Table 1.111 Elbows 45° XL | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11


32 612092 1 45 1440 43 102 0,070

40 612094 1 25 800 54 120 0,110

50 612096 1 20 640 66 136 0,175

63 612098 1 10 320 82 158 0,295

75 612100 1 14 252 96 198 0,520

90 612102 1 8 144 115 232 0,810

110 612104 1 10 80 138 265 1,320

125 612106 1 10 80 157 279 1,770

160 615275 1 4 32 207 377 4,410

180 615687 1 3 24 228 382 4,610

200 616264 1 1 18 254 415 6,760

225 615688 1 1 8 280 450 8,290



250 616404 1 1 6 310 621 17,300

280 616405 1 1 4 350 702 25,600

315 616406 1 1 2 396 755 36,000

With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Separate fusion zones. Handling at the construction site is made easy thanks to the fused-on eyebolts.


81



Table 1.113 Elbows 90° XL | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11


25 612091 1 60 1920 37 73 0,060

32 612093 1 45 1440 43 82 0,070

40 612095 1 25 800 53 96 0,110

50 612097 1 20 640 66 113 0,190

63 612099 1 8 256 83 136 0,340

75 612101 1 12 216 96 170 0,600

90 612103 1 6 108 115 202 0,950

110 612105 1 10 80 138 234 1,560

125 612107 1 8 64 157 254 2,030

160 615276 1 3 24 207 329 4,850

180 615689 1 3 24 228 354 5,760

200 616265 1 2 16 254 392 8,557

225 615690 1 1 8 280 430 10,220



250 616408 1 1 6 310 534 19,100

280 616409 1 1 2 350 621 27,500

315 616410 1 1 2 396 677 40,000

With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Separate fusion zones. Handling at the construction site is made easy thanks to the fused-on eyebolts.


82


Table 1.114 T-Pieces with extra long outlet spigot in kit version; coupler MB with removable center stop included | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

Table 1.115 T-Pieces reduced | Maximum working pressure 16 bar (water)/10 bar (gas) Outlet spigot pipe SDR11 | PE 100 | SDR 11

d Order Ref. Stock-status BX PU D L L1 Weight kg/each

25/25 616335 1 40 720 36 108 110 0,124

32/32 612161 1 30 540 44 116 131 0,190

40/40 612162 1 20 360 53 146 151 0,290

50/50 612163 1 10 180 67 175 186 0,500

63/63 612164 1 5 90 81 197 203 0,750

Straight connector with exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Extra long outlet spigot dimensioned for 2 fusion operations.

d Order Ref. Stock-status BX PU D L L1 Weight kg/each

32/20 616417 1 30 540 45,2 116 116,6 0,105

40/32 616418 1 20 360 54,3 146 147,6 0,170

50/32 616419 1 10 180 68,5 175 158 0,300

50/40 616420 1 10 180 68,5 175 166,5 0,320

63/32 616421 1 10 180 83,1 197 172,6 0,435

63/40 616422 1 10 180 83,1 197 181,5 0,450

63/50 616423 1 10 180 83,1 197 196,6 0,490

With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Separate fusion zones. Outlet spigot SDR 11 for processing couplers UB/MB.


83


Table 1.116 T-Pieces | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

Table 1.117 T-Pieces XL | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

Table 1.118 T-Pieces XL reduced | Maximum working pressure 16 bar (water)/10 bar (gas) outlet spigot pipe SDR11 | PE 100 | SDR 11

d Order Ref. Stock-sta-tus

BX PU D L L1 Weight kg/each

75 612165 1 8 144 96 278 187 0,980

90 612166 1 10 80 117 305 211 1,650

110 612167 1 6 48 142 355 248 2,580

125 612168 1 5 40 160 384 272 3,520

160 615277 1 3 24 200 430 315 5,820

180 615691 1 2 16 228 480 354 7,900

200 616266 1 1 8 251 550 400 11,130

225 615692 1 1 8 280 580 430 13,900

With exposed heating coils for optimal heat transfer on all 3 sides, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Straight passage fusible in

one-step, therefore a total of only two fusions necessary.

d Order Ref. Stock-sta-tus BX PU D L L1

Weight kg/each

250 616412 1 1 4 310 770 540 27,400

280 616413 1 1 1 350 905 630 42,200

315 616414 1 1 2 396 940 670 55,900

With exposed heating coils for optimal heat transfer on all 3 sides, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Separate fusion zones. Handling at

the construction site is made easy thanks to the fused-on eyebolts.

d d1 Order Ref. Stock-status BX PU D L L1Weight kg/

each250 110 616426 1 1 2 310 770 405 22,100250 225 616427 1 1 2 310 770 440 23,500280 110 616428 1 1 2 350 905 440 34,100280 225 616429 1 1 2 350 905 475 35,500315 110 616430 1 1 1 396 940 485 42,400315 225 616431 1 1 1 396 940 525 43,500

With exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zones plus cold zones at the end and in the middle to prevent the flow of molten material, for use without holding devices. Separate fusion zones. Outlet spigot SDR 11 for processing of UB/MB couplers. Other branch dimensions can be created using MR d 225/160 or MR d 110/90 and MR

d 110/63.

Other dimensions on request.


84


Table 1.119 Transition Fittings HD-PE/Steel | Maximum working pressure 10 bar (gas) | PE 100 | SDR 11

Table 1.120 Transition Fittings HD-PE/Steel (Spigot fittings) | Maximum working pressure 10 bar (gas) | PE 100 | SDR 11


25/20 612744 1 20 600 40 376 0,840

32/25 612780 1 15 450 47 388 1,115

40/32 612781 1 10 300 58 396 1,600

50/40 612782 1 8 240 70 409 2,100

63/50 612783 1 6 180 84 410 2,720

75/65 612789 1 4 120 98 425 4,200

90/80 612784 1 1 84 118 397 5,310

110/100 612785 1 1 54 143 420 8,380

125/100 612786 1 1 46 158 425 8,700

160/150 612787 1 1 24 197 484 16,830

180/150 615030 1 1 18 227 500 21,250

200/200 612795 1 1 12 267 481 27,020

225/200 612370 1 1 11 282 459 27,350

Compact part. HD-PE end with exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material, for use without holding devices. Steel end permanently anchored in the HD-PE. Cannot be released or rotated. Self sealing patented sealing geometry without

elastomer seal. For use in gas systems. Steel pipe sockets marked by restrutting (for use with gas up to 10 bar).Registered by DVGW under registration nos.

DV-7501AU2256, DV-7501AU2257 and DV-7501AU2258.


32/25 615475 1 15 450 48,5 465 1,190

40/32 615476 1 9 270 57,5 500 1,600

50/40 615477 1 8 240 68,5 520 2,400

63/50 615478 1 6 180 82,5 540 2,680

Compact part. HD-PE end with exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material, for use without holding devices. Steel end permanently anchored in the HD-PE. Cannot be released or rotated. Self sealing patented sealing geometry without

elastomer seal. For use in gas systems. Steel pipe sockets marked by restrutting (for use with gas up to 10 bar).Registered by DVGW under registration nos.

DV-7501AU2256, DV-7501AU2257 and DV-7501AU2258.


85


Table 1.121 Transition Fittings HD-PE/Steel with male thread | Maximum working pressure 5 bar (gas) | PE 100 | SDR 11

Table 1.122 Transition Fittings HD-PE/Steel with female thread | Maximum working pressure 5 bar (gas) | PE 100 | SDR 11

d R Order Ref. Stock-status BX PU D L Weight kg/each

20 1/2´´ 612578 1 40 3600 35 95 0,150

32 1´´ 612580 1 20 1800 47 119 0,345

40 1 1/4´´ 612582 1 20 1000 58 131 0,530

50 1 1/2´´ 612584 1 15 750 70 146 0,700

63 2´´ 612586 1 10 500 84 152 1,050

Compact part. HDPE end with exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without holding devices. Steel end permanently anchored in the HDPE. Cannot be released or rotated. Self sealing patented sealing geometry without

elastomer seal. For use in gas systems.

Registered by DVGW under registration nos.DV-7501AU2256 and DV-7501AU2257.

Other thread sizes on request

d Rp Order Ref. Stock-status BX PU D L Weight kg/each

32 1´´ 612570 1 20 1800 47 112 0,340

40 1´´ 612571 1 20 1000 58 121 0,610

40 1 1/4´´ 612572 1 20 1000 58 121 0,500

50 1 1/2´´ 612574 1 15 750 70 136 0,650

63 2´´ 612576 1 10 500 84 141 1,010

Compact part. HD-PE end with exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without holding devices. Steel end permanently anchored in the HD-PE. Cannot be released or rotated. Self sealing patented sealing geometry without


Registered by DVGW under registration nos.:DV-7501AU2256 and DV-7501AU2257.



86


Table 1.123 Transition Elbows 90° HD-PE/Steel with male thread | Maximum working pressure 5 bar (gas) | PE 100 | SDR 11

Table 1.124 Transition Elbows 90° HD-PE/Steel with female thread | Maximum working pressure 5 bar (gas) | PE 100 | SDR 11

d R Order Ref. Stock-status BX PU D L L1Weight kg/

each

40 1 1/4´´ 612602 1 15 750 58 102 144 0,560

50 1 1/2´´ 612604 1 10 500 70 118 160 0,770

63 2´´ 612606 1 10 320 84 128 176 1,130





d Rp Order Ref. Stock-status BX PU D L L1Weight kg/

each

32 1´´ 612610 1 20 1000 47 85 111 0,368

40 1´´ 612611 2 15 750 58 102 130 0,650

40 1 1/4´´ 612612 1 15 750 58 102 130 0,540

50 1 1/2´´ 612614 1 10 500 70 118 146 0,710

63 2´´ 612616 1 10 320 84 128 161 1,115





Dd

L90°

R


87


Table 1.125 Transition Fittings HD-PE/Brass with male thread | Maximum working pressure 16 bar (water) | PE 100 | SDR 11


20 1/2´´ 612710 1 40 3600 35 91 0,160

25 3/4´´ 612711 1 30 2700 40 99 0,190

32 1´´ 612712 1 20 1800 47 112 0,310

32 1 1/4´´ 612709 1 20 1800 47 120 0,390

32 1 1/2´´ 612698 1 15 1350 47 121 0,450

40 1´´ 612721 1 20 1000 58 123 0,480

40 1 1/4´´ 612713 1 20 1000 58 126 0,460

40 1 1/2´´ 612718 1 20 1000 58 127 0,520

40 2´´ 612725 1 20 1000 58 132 0,680

50 1´´ 612719 1 15 750 70 134 0,620

50 1 1/4´´ 612716 1 15 750 70 136 0,610

50 1 1/2´´ 612714 1 15 750 70 137 0,620

50 2´´ 612706 1 15 750 70 147 0,760

63 1 1/4´´ 612722 1 10 500 84 138 0,910

63 1 1/2´´ 612717 1 10 500 84 137 0,890

63 2´´ 612715 1 10 500 84 142 0,920

75 2´´ 612694 1 10 320 98 165 1,470

75 2 1/2´´ 612695 1 10 320 98 167 1,490

Compact part. HD-PE end with exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without holding devices. Brass end permanently anchored in the HD-PE. Cannot be released or rotated. Self sealing patented sealing geometry without

elastomer seal. For use in water systems. Registered by DVGW under registration nos.: DV-7501AU2256 and DV-7501AU2257.Standard: Brass. Other materials on request (Gunmetal and V2A on request).


Table 1.126 Transition Fittings HD-PE/Gunmetal with female thread | Maximum working pressure 16 bar (water) | PE 100 | SDR 11

d Rp Order Ref. Stock-status BX PU D L Weight kg/each

32 1´´ 612595 1 20 1800 47 112 0,360

40 1 1/4´´ 612596 1 20 1000 58 121 0,520

50 1 1/2´´ 612692 1 15 750 70 136 0,650

63 1 1/2´´ 612708 1 10 500 84 141 1,230

63 2´´ 612693 1 10 500 84 141 1,050

Compact part. HD-PE end with exposed heating coils for optimal heat transfer, large insertion depth, wide fusion zone plus cold zones at the end and in the transition area to prevent the flow of molten material for use without holding devices. Gunmetal end permanently anchored in the HD-PE. Cannot be released or rotated. Self sealing patented sealing geometry

without elastomer seal. For use in water systems. Registered by DVGW under registration nos. DV-7501AU2256 and DV-7501AU2257.Standard: Gunmetal. Other materials on request (V2A auf Anfrage)



88


Table 1.127 Transition Elbows 45° HD-PE/Brass with male thread | Maximum working pressure 16 bar (water) | PE 100 | SDR 11

Table 1.128 Transition Elbows 90° HD-PE/Brass with male thread | Maximum working pressure 16 bar (water) | PE 100 |SDR 11


32 1´´ 612145 1 20 1000 47 126 0,340

40 1 1/4´´ 612149 1 15 750 58 140 0,490

40 1 1/2´´ 612139 1 15 750 58 142 0,540

50 1 1/2´´ 612144 1 10 500 70 163 0,660

63 1 1/2´´ 612147 1 10 320 84 176 0,950

63 2´´ 612146 1 10 320 84 178 0,980


elastomer seal. For use in water systems. Registered by DVGW under registration nos.: DV-7501AU2256 and DV-7501AU2257.Standard: Brass. Gunmetal and V2A on request.



32 1´´ 612120 1 20 1000 47 85 0,340

32 1 1/2´´ 612140 1 20 1000 47 94 0,470

40 1´´ 612127 1 15 750 58 102 0,500

40 1 1/4´´ 612122 1 15 750 58 102 0,520

40 1 1/2´´ 612121 1 15 750 58 102 0,560

50 1´´ 612119 1 10 500 70 118 0,680

50 1 1/4´´ 612123 1 10 500 70 118 0,670

50 1 1/2´´ 612124 1 10 500 70 118 0,680

63 1 1/2´´ 612125 1 10 320 84 128 0,980

63 2´´ 612126 1 10 320 84 128 1,000


elastomer seal. For use in water systems. Registered by DVGW under registration nos.:DV-7501AU2256 and DV-7501AU2257.Standard: Brass. Gunmetal and V2A on request.


Dd

L90°

R


89


Table 1.129 Repair Saddles RS-XL | Maximum working pressure 10 bar (water)/5 bar (gas) | PE 100 | SDR 17

Table 1.130 Repair Saddle Top-Loading | Maximum working pressure 16 bar (water)/10 bar (gas) |PE 100 | SDR 11

d1 Order Ref. Stock-status BX PU Repair area dR Weight kg/each

560 616367 2 1 4 230 14,300

630 616368 2 1 4 230 15,000

710 616369 2 1 4 230 18,900

800 616370 2 1 4 230 15,800

900 616371 2 1 4 230 17,600

1000 616372 2 1 4 230 16,400

1200 616379 2 1 4 230 16,250

For the repair of damages such as scratches, grooves or pipe penetration. Compact fitting made of HD-PE. Saddle with exposed heating element for optimal heat transfer. For assembly with FRIATOOLS clamping unit VACUSET XL (see Product Range FRIATOOLS). With indicator for visual control of fusion.

The damage must be within the specified repair area dR and may not be covered by the fusion zone.

d1 Order Ref. Stock-status BX PU d3 Weight kg/each

250-560 615397 2 10 180 50 0,570

Suitable for all pipe diameters in the given range by means of the FRIALEN-FRIATOP Clamping Unit (see Product Range FRIATOOLS). HD-PE saddle for the repair of minor pipe damage with or without escape of fluid. In order to avoid discharge of media the leak has to be sealed with a separate plug*

(< d3). With exposed heating element for optimal heat transfer.

*The plug is not included in the scope of delivery.


90


Table 1.131 Spigot Saddles | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

d1 d2 Order Ref. Stock-status BX PU d3 Drilling Ø da L Weight kg/each

63 32 612757 1 20 360 22 20 100 0,330

63 50 612759 1 20 360 37 36 113 0,370

75 50 615020 1 15 270 38 36 82 0,430

90 32 615285 1 20 160 21 20 103 0,700

90 63 612819 1 20 160 50 46 103 0,720

110 32 615334 1 12 96 24 20 125 0,788

110 50 615031 1 12 96 39 36 132 0,816

110 63 612760 1 12 96 49 46 150 0,868

110 90 615411 1 12 96 70 65 115 0,960

125 32 615087 1 12 96 21 20 109 0,945

125 63 612761 1 12 96 47 46 109 0,990

125 90 615412 1 12 96 70 65 116 1,080

125 110 615584 1 10 80 86 84 116 1,150

160 32 612886 1 8 64 21 20 126 1,440

160 63 612762 1 6 48 47 46 140 1,520

160 90 615413 1 2 36 70 65 140 1,640

160 110 615739 1 2 36 86 84 140 1,765

160 125 615585 1 2 36 98 95 140 1,880

180 63 612763 1 6 48 47 46 109 1,190

180 90 615414 1 2 36 70 65 116 1,820

180 110 615948 1 2 36 86 84 136 1,960

180 125 615740 1 2 36 98 95 141 2,110

200 63 612764 1 5 40 47 46 109 1,260

225 63 612765 1 5 40 47 46 109 1,210

225 90 615415 1 5 40 70 65 130 1,950

225 110 616044 1 5 40 86 84 140 1,960

225 125 616045 1 4 32 97 95 146 2,240

225 160 616046 1 4 32 125 123 157 2,580

Compact part in HD-PE, saddle with exposed heating element for optimal heat transfer and outlet spigot for use with FRIALEN-couplers MB or UB. Swarfless tapping in the depres-surised state by means of commercial drilling units.


91


Table 1.132 Spigot Saddles with integral drill | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

Table 1.133 Spigot Saddles with flange outlet | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

d1 d2 Order Ref. Stock-status BX PU Drilling Ø da L Weight kg/each

63 32 615091* 1 20 360 21 100 0,425

90 32 615092 1 20 160 21 104 0,820

110 32 615093 1 12 96 21 125 0,940

125 32 615094 1 12 96 21 109 1,105

160 32 615095 1 6 48 21 110 1,275

*Saddle parts d 63 can only be processed using pipes up to SDR11.

d1/DN Order Ref. Stock-Status BX PU D dk Drilling Ø da Ø k Holes for screw

Weight kg/each

110/80 616016 1 3 54 204 16,5 65 160 8 3,700

125/80 616017 1 2 36 204 16,5 65 160 8 3,940

160/80 616018 1 2 36 204 16,5 65 160 8 4,320

180/80 616019 1 2 36 204 16,5 65 160 8 4,610

225/80 616020 1 2 16 204 16,5 65 160 8 4,720

125/100 616021 1 2 36 224 16,5 84 180 8 4,770

160/100 616022 1 2 36 224 16,5 84 180 8 5,270

180/100 616023 1 2 36 224 16,5 84 180 8 5,520

225/100 616024 1 2 16 224 16,5 84 180 8 5,635

Compact part in HD-PE. Manufactured combination of FRIALEN spigot saddle, coupler and FRIALEN Full Faced Flanges EFL (compact flange). Saddle with exposed heating coil for optimum heat transfer. Tapping in pressure free condition or, using an additional isolating valve, under operating pressure by means of standard tapping equipment (we recommend Hütz

& Baumgarten (www.huetz-baumgarten.de)). Flange connection measurements according to DIN 2501, part 1. We recommend GST gaskets.Additional washers are necessary for the flange reducer.

D

d3

z

d1

b

k


92


Table 1.134 Pressure Tapping Tees with extra long outlet spigot in kit version | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

d1 d2 Order Ref. Stock-status BX PU d3 Drilling Ø da L Weight kg/each

63 32 615649 1 16 288 40 21 100 0,550

75 32 615651* 1 12 216 40 21 100 0,780

90 20 615653* 2 12 96 50 30 116 1,075

90 25 615654* 2 12 96 50 30 116 1,080

90 32 615655 1 12 96 50 30 116 1,080

90 40 615656* 1 12 96 50 30 116 1,240

110 32 615661 1 10 80 50 30 116 1,290

110 40 615662* 1 10 80 50 30 116 1,490

110 50 615663 1 10 80 50 30 116 1,500

125 32 615667 1 10 80 50 30 116 1,490

125 40 615668* 1 10 80 50 30 116 1,570

160 20 615672* 2 6 48 50 30 162 1,910

160 25 615673* 2 6 48 50 30 162 1,920

160 32 615674 1 6 48 50 30 162 1,910

160 40 615675* 1 6 48 50 30 162 2,081

For leak free and swarfless tapping up to 10 bar (gas) or 16 bar (water). Integral drill with upper and lower stop, guided in a metal sleeve. With exposed heating element for optimal heat transfer. End plugs with internal O-ring seal. Fusible dome (d1 63 and 75 = MV d 40; d1 ≥ d 90 = K). Pressure test possible before tapping. For pressure test adapter and actuating key

see Product Range FRIATOOLS. Length of the outlet spigots dimensioned for 2 fusion operations.

d 2

d3

d1

L1 PRODUct INFORMAtION - ELEctROFUSION

93


Table 1.135 Pressure Tapping Valves with extra long outlet spigot in kit version | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

Table 1.136 Pressure Tapping Valves Top-Loading with extra long outlet spigot | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11


63 32 615614 1 16 288 20 160 0,980

63 40 615615 1 16 288 20 160 1,050

90 32 615616 1 12 96 30 200 1,890

90 40 615617* 1 12 96 30 200 2,020

110 32 615620 1 10 80 30 190 2,140

110 40 615621* 1 10 80 30 190 2,230

110 50 615622 1 10 80 30 190 2,230

110 63 615623 1 10 80 30 190 2,380

125 32 615624 1 10 80 30 190 2,150

125 40 615625* 1 10 80 30 190 2,300

125 50 615626 1 10 80 30 190 2,280

125 63 615627 1 10 80 30 190 2,450

160 32 615628 1 6 48 30 248 2,750

160 40 615629* 1 6 48 30 248 2,825

160 50 615630 1 6 48 30 248 2,825

160 63 615631 1 6 48 30 248 2,885

180 32 615632 1 5 40 30 248 2,760

180 40 615633* 1 5 40 30 248 2,835

225 32 615640 1 5 40 30 248 2,890

225 40 615641* 1 5 40 30 248 3,010

Compact part in HD-PE with no threaded connections. Actuating spindle in stainless steel 1.4305. No re-insulating required. Leak free and swarfless tapping up to 10 bar (gas) or 16 bar (water). Integral drill with upper and lower stop, guided in a metal sleeve. Max. 10 turns to activate “OPEN/CLOSE”. With exposed heating element for optimal heat transfer. Maintenance

free, operating isolating valve actuated by a linkage (e.g. FRIALEN- EBS). Length of the outlet spigot dimensioned for 2 fusion operations. Four cornered shaft wrench size 14.Registered by DVGW under registration nos.: DV-6611AU7039, DV-6611AU2254 and DV-6611AU2255.

*with electrofusion reducers MR d 50/40.


250-315 50 615589 1 10 80 30 245 2,260

355-400 50 616437 1 10 80 30 245 2,264

For flexible adaptation to all pipe diameters in indicated range by means of the FRIALEN FRIATOP Clamping device (see Product Range FRIATOOLS Technical Equipment). Stainless steel activating spindle 1.4305. No further insulation necessary. Leak and swarf free tapping up to 10 bar (gas) and 16 bar (water). Integrated drill with upper and lower stop, guided in a metal sleeve. With exposed heating coils for optimal heat transfer. Maintenance free, operating isolating valve actuated by a linkage (e.g. FRIALEN-EBS). Length of the outlet spigot

dimensioned for 2 fusion operations. Four cornered shaft wrench size 14.

L

d2

d1


94


Table 1.137 Pressure Tapping Valves with extra long outlet spigot | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

Table 1.138 Installation kits for Pressure Tapping Valves | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11


50 32 615955 1 16 288 20 164 1,31063 32 615341 1 16 288 20 164 1,38063 40 615342 1 16 288 20 164 1,39075 32 615956 1 12 216 20 164 1,39090 32 615344 1 12 96 30 200 1,83090 50 615346 1 12 96 30 200 1,88590 63 615347 1 12 96 30 200 1,955110 32 615348 1 10 80 30 200 1,980110 50 615350 1 10 80 30 200 2,070110 63 615351 1 10 80 30 200 2,100125 32 615352 1 10 80 30 200 2,185125 50 615354 1 10 80 30 200 2,245125 63 615355 1 10 80 30 200 2,320140 63 615930 1 10 80 30 200 2,290160 32 615356 1 6 48 30 248 2,750160 50 615358 1 6 48 30 248 2,825160 63 615359 1 6 48 30 248 2,885180 32 615361 1 5 40 30 248 2,760180 50 615363 1 5 40 30 248 2,835180 63 615364 1 5 40 30 248 2,895200 32 615366 1 5 40 30 248 2,850200 50 615368 1 5 40 30 248 2,910200 63 615369 1 5 40 30 248 2,980225 32 615374 1 5 40 30 248 2,870225 50 615376 1 5 40 30 248 2,930225 63 615377 1 5 40 30 248 3,000

Compact part in HD-PE with no threaded connections. Actuating spindle in stainless steel 1.4305. No re-insulating required. Leak free and swarfless tapping up to 10 bar (gas) or 16 bar (water). Integral drill with upper and lower stop, guided in a metal sleeve. Max. 10 turns to activate “OPEN/CLOSE”. With exposed heating element for optimal heat transfer. Maintenance

free, operating isolating valve actuated by a linkage (e.g. FRIALEN- EBS). Length of the outlet spigots dimensioned for 2 fusion operations. Four cornered shaft wrench size 14.Registered by DVGW under registration nos.: DV-6611AU7039, DV-6611AU2254 and DV-6611AU2255.

RD in m Order Ref. Stock-status BX PU SW1 Weight kg/each

0,45-0,7 615866 1 1 42 14 1,500

0,7-1,0 615867 1 1 42 14 1,950

0,9-1,3 615335 1 1 42 14 2,450

1,2-1,8 615325 1 1 42 14 3,350

1,8-2,7 616327 2 1 14 3,600

2,6-3,5 616328 2 1 14 3,600

Telescopic actuating linkage for operation of the FRIALEN-DAV from the street cap. Stepless adjustment in the stated range (RD) without the use of tools, even in the installed state. Self supporting in any extended position. Corrosion proof.

Dimension RD valid for DAV d1 = 90 – 125.

For DAV d1 < 90 please deduct 50 mm and for d1 > 125 please add 50 mm.(See also dimension L of the DAV)

L

d 2

d1


95


Table 1.139 Shut-Off Valve with shut-off mechanism suitable for plastics Application: Water | Maximum working pressure 16 bar (water) | PE 100 | SDR 11

Table 1.140 Installation kits FBS for FRIALOC® PE shut-off valves with KlickFix® system.

d d2 Order Ref. Stock-status BX PU H L Weight kg/each

90 80 616293 1 1 8 450 720 13,900110 80 616294 1 1 8 450 720 14,200125 80 616295 1 1 8 450 720 14,500160 80 616296 1 1 2 608 1010 39,000180 80 616297 1 1 2 608 1030 39,800200 80 616453* 2 1 2 608 1030 45,000225 80 616298* 2 1 2 608 1030 45,500250 80 616438* 2 1 2 608 1030 46,000

Facilitates the completely fused and homogeneous PE piping. Thanks to the innovative mechanism, a reliable shut-off can be achieved with only 9 or 14 turns and without major force. The drive is a very low-wear drive. A forced flushing prevents dead spaces and stagnation. The small sealing area minimises biological growth. The free passage corresponds to the connecting

pipe SDR 11 (except d 225). Each individual FRIALOC PE shut-off valve is subjected to comprehensive tests at the factory. The valve is operated using the installation kit FBS.Four cornered shaft wrench size 19. Registered by DVGW under registration no. DW-6210BT0171.

*Limited passage corresponds to dim. d 180

Table 1.141 Bars of hot zinc dipped steel


0,75 - 1,0 616308 2 1 42 30 2,500

0,9 - 1,3 616309 1 1 42 30 2,950

1,2 - 1,8 616310 1 1 42 30 3,850

1,5 - 2,3 616318 2 1 42 30 4,400

Table 1.142 Bars of stainless steel


0,75 - 1,0 616315 2 1 42 30 2,400

0,9 - 1,3 616316 1 1 42 30 2,800

1,2 - 1,8 616317 1 1 42 30 3,450

1,5 - 2,3 616319 2 1 42 30 4,150

2,4 - 3,5 616326 2 1 50 30 6,350

To operate the FRIALOC PE shut-off valve from the surface box. Optimally matched, can be individually extended to the required covering height. With KlickFix coupler for easy installa-tion. Made of galvanised steel or stainless steel.


96


Table 1.143 Ball Valves in HD-PE, 1/4 turn | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

Table 1.144 Ball Valves made from HD-PE, 1/4 turn, full port | Maximum working pressure 16 bar (water)/10 bar (gas) | PE 100 | SDR 11

d Order Ref. Stock-status BX PU d1 H L SW1 SW2Weight kg/

each

32 612490 1 1 170 24 129 310 50 x 50 19 0,650

40 612497 1 1 170 24 129 310 50 x 50 19 0,700

50 612492 1 1 170 24 129 310 50 x 50 19 0,750

63 612494 1 1 50 43 195 417 50 x 50 25 2,380

90 612495 1 1 24 67 245 545 50 x 50 25 4,700

110 612493 1 1 24 67 245 545 50 x 50 25 5,100

125 612496 1 1 24 67 245 545 50 x 50 25 5,400

160 612483 1 1 8 98 329 544 50 x 50 25 12,800

180 615309 1 1 8 98 329 544 50 x 50 25 13,100

200 612480 1 1 8 98 329 544 50 x 50 25 14,100

225 616186 1 1 8 98 332 530 50 x 50 25 15,000

Compact part in HD-PE with spigots for use with FRIALEN-couplers MB or UB. No corrosion proofing required. Open and closed position with definite stop. Maintenance free, with operating isolating valve actuated by a linkage (e.g. FRIALEN-BS).

Registered by DVGW under registration nos.: DG-8631AU2251, DG-8631AU2252 and DG-8631AU2253.

d Order Ref. Stock-status BX PU d1 H L SW1 SW2Weight kg/

each

32 616176 1 1 100 25 153 324 50 x 50 19 0,650

40 616177 1 1 100 31 153 324 50 x 50 19 0,780

50 616178* 1 1 50 37 193 404 50 x 50 25 2,220

63 616179 1 1 50 50 206 412 50 x 50 25 2,415

90 616180 1 1 18 71 291 576 50 x 50 25 4,700

110 616181 1 1 18 87 291 576 50 x 50 25 5,100

125 616182 1 1 18 99 291 576 50 x 50 25 5,400

Compact construction part made from HD-PE with spigots for processing with FRIALEN MB or UB couplers. Valve passage without construction in line with internal diameter of pipe socket. No corrosion prevention measures necessary. Open and closed position at defined stop. Maintenance free shut-off cock activated by lever system (e.g. FRIALEN BS).

Registered by DVGW for gas under registration nos.: DG-8631AU2251, DG-8631AU2252.

*BS d 63 – d 225 required


97


Table 1.145 Installation kits for Ball Valves and Tapping Ball Valves (Standard and Top-Loading)

d RD in m Order Ref. Stock-status BX PU SW1 Weight kg/each

32– 50 0,45-0,70 615741 1 1 42 30 1,800

32– 50 0,60-1,00 615957 1 1 42 14 2,700

32– 50 0,60-1,00 615328 1 1 42 30 2,000

32– 50 1,00-1,50 615330 1 1 42 30 3,400

32– 50 1,20-2,00 616068 2 1 42 14 3,450

32– 50 1,20-2,00 615329 2 1 42 30 3,650

63–225 0,60-1,00 615958 1 1 42 14 2,050

63–225 0,60-1,00 615310 1 1 42 30 3,050

63–225 1,00-1,50 615331 1 1 42 30 4,150

63–225 1,20-2,00 616069 2 1 42 14 3,600

63–225 1,20-2,00 615311 2 1 42 30 5,250

Telescopic actuating linkage for operation of the FRIALEN-KHP, KH, AKHP and AKHP-TL from the valve cover. Stepless adjustment in the stated range (RD) without the use of tools, even in the installed state. Self supporting in any extended position. Corrosion proof. Wrench size 14 specially designed for domestic connection.


98


PRODUCT PRODUCT DESCRIPTION CODE

FRIAMAT BASIC

UNIVERSAL FUSION UNIT WITHOUT DOCUMENTATION FUNCTION

WITH READER WAND 613104WITH BARCODE SCANNER 614104

FRIAMAT BASIC ECO

UNIVERSAL FUSION UNIT WITHOUT DOCUMENTATION FUNCTION

WITH READER WAND 613092WITH BARCODE SCANNER 614092

FRIAMAT GEO PRINT

ELECTROFUSION UNIT WITH DOCUMENTATION FUNCTION

WITH READER WAND 613099

BARCODE SCANNER

SCAN 624002

READER WAND

FWLESST 623645

MEMORY-STICK

MEMSTICK 624023

FRIATRACE

DATABASE SOFTWARE FRIATRACE

FRIATRACE DATABASE SOFTWARE 613280FRIATRACE COMBI-PACKAGE 624026


SOCKET CONTACTS 4.0 MM

CONTACT4 624530

ADAPTOR FOR FLAT CONTACTS

ADFL 613236

ADAPTOR FOR 4.7 MM SOCKET CONTACTS

ADBK 613237

FWSG RA COMPACT SCRAPER TOOL FOR PIPES AND OUTLETS D 25 - D 63

DESCRIPTION DIMENSION SDR ORDER REF.

FWSG RA 25* d 25 SDR 7,4 / SDR 11 613576

FWSG RA 32 d 32 SDR 11 613580

FWSG RA 40 d 40 SDR 11 613581

FWSG RA 50 d 50 SDR 11 613582

FWSG RA 63 d 63 SDR 11 613583

Hand crank all dimensions 613579

Dimension-bound compact scraper tool for the reliable removal of the oxide layer of HD-PE and PE-Xa pipes and at the outlets of FRIALEN safety fittings (see product range FRIALEN). Super long scraping length, in the diameter d

32 also for FRIALONG long couplers. Scraper blade made of carbide with 2 edges (twice the service life). Automatic compensation of pipe out-of-roundness and tolerances. Manual operation, with hand crank or cordless screwdriver.

Table 1.146 FRIATOOLS


SCRAPER TOOL FOR PIPES D 20 - D 63

FWSG 63 613305

For the reliable removal of the oxide layer of HD-PE and PE-Xa pipes. Scraper blade made of carbide for a long life. Even swarf removal thanks to a spring-loaded scraper blade and automatic feed. Inclusive of a replacement scraper

blade. The tool is delivered in a handy aluminium transport box.


FWSG 225 613311

For the reliable removal of the oxide layer of HD-PE and PE-Xa pipes. Scraper blade made of carbide for a long life. Even swarf removal thanks to a spring-loaded scraper blade and automatic feed. Inclusive of a replacement scraper

blade and FRIATEC maintenance spray. The tool is delivered in a handy aluminium transport box.

SCRAPER TOOL SET FOR PIPES D 20 - D 225

FWSG 63/225 613316

For the reliable removal of the oxide layer of HD-PE and PE-Xa pipes. Scraper blade made of carbide for a long life. Even swarf removal thanks to a spring-loaded scraper blade and automatic feed. Inclusive of a replacement scraper blade for each tool and FRIATEC maintenance spray. The tools are delivered in a handy aluminium transport box.

99




FWSG 710 L 613642

For the reliable removal of the oxide layer of HD-PE and PE-Xa pipes for half or entire coupler length. Scraper blade made of carbide for a long life. Even swarf removal thanks to a spring-loaded scraper blade and automatic feed. Inclusive of a replacement scraper blade and FRIATEC maintenance spray. The tool is delivered in a handy

aluminium transport box.SCRAPER TOOL FOR PIPES D 250 - D 710 AND SPIGOT FITTINGS

FWSG 710 S 613639

For the reliable removal of the oxide layer on spigot fittings. Additionally it is also possible to scrape HD-PE and PE-Xa-pipes (maximum along half length of couplers d 710). Scraper blade made of carbide for a long life. Even

swarf removal thanks to a spring-loaded scraper blade and automatic feed. Includes replacement blade and FRIATEC maintenance spray. The tool is delivered in a handy aluminium transport box.


FWSG 900 L 613644

For the reliable removal of the oxide layer of HD-PE pipes for half or entire coupler length. Scraper blade made of carbide for a long life. Even swarf removal thanks to a spring-loaded scraper blade and automatic feed. Includes replacement blade and FRIATEC maintenance spray. The tool is delivered in a handy aluminium transport box.

LARGE PIPE SCRAPER TOOL FOR PIPES D 800 TO D 1200

FWSG XL 613645

For the reliable removal of the oxide layer of large pipes made of HD-PE in the diameter range d 800 to d 1200, SDR11-SDR33. Modular design for easy handling and quick assembly. Diameter adjustment through quick setting. Center-supported drive via hand crank. Automatic compensation of pipe out-of-roundness and tolerances through spring-supported adjustable blade unit. Scraper blade designed as turning blade with 2 cutting edges (twice the

service life).

FWSG SE SCRAPER TOOLS FOR PIPE ENDS AND SADDLE AREAS D 63 - D 315

DESCRIPTION DIMENSION ORDER REF.

FWSG SE 63 d 63 613562

FWSG SE 75 d 75 613563

FWSG SE 90 d 90 613564

FWSG SE 110 d 110 613565

FWSG SE 125 d 125 613566

FWSG SE 140 d 140 613567

FWSG SE 160 d 160 613568

FWSG SE 180 d 180 613569

FWSG SE 200 d 200 613570

FWSG SE 225 d 225 613571

FWSG SE 250 d 250 613572

FWSG SE 280 d 280 613573

Dimension-bound scraper tool for the reliable removal of the oxide layer of HD-PE and PE-Xa pipe ends and in the saddle area. Scraper blade designed as turning blade with 2 blades (twice the service life). Easy clamping thanks to

the open design of the scraper tool.

The tool is delivered in a handy aluminium transport box.


Table 1.146 FRIATOOLS (Continued)

100


FWSGE REPLACEMENT BLADES FOR SCRAPER TOOLS

DESCRIPTION UNIT TYPE MARKING ORDER REF.

FWSGE 3 FWSG 225 / FWSG 315 / FWSGA coloured red 613322*

FWSGE 4 FWSG 63 coloured green 613323*

FWSGE 5 FWSG 710 L/S / FWSG 900 L coloured blue 613324*

FWSGE 6 FWSGS 110 / FWSGS 180 613325**

FWSGE 7 FWSGS 225 613326**

*Consisting of 3 x replacement blades, 1 x torx screw and 1 x torx wrench. **Consisting of 1 x replacement blades, 2 x torx screw and 1 x torx wrench.

Replacement blade, designed as turning blade (twice the service life).


FWSGE 8 For FWSG SE (all types) *613327

*Consisting of 1 x replacement blade, 1 x hexagon socket screw and 1 hexagon socket wrench.Replacement blade, designed as turning blade (twice the service life).


FWSGE 10 FWSG RA 32 and 40 613329*

FWSGE 11 FWSG RA 50 and 63 613330*

*Consisting of 1 x replacement blade, 1 x torx screw and and 1 x torx wrench.


FWSGE 12 for FWSG XL 613331*

*Consisting of 1 x replacement blade, 1 x guide plate, 2 x torx screws and 1 torx wrench.Replacement blade and guide plate designed for large pipe processing; designed as turning blade and turning plate (twice the service life).


Table 1.146 FRIATOOLS (Continued)

Polyolefin Manual and Catalogue - Marley Pipe Systems€¦ · Polyolefin Manual and Catalogue...

Documents

Transcript of Polyolefin Manual and Catalogue - Marley Pipe Systems€¦ · Polyolefin Manual and Catalogue...