POLYMERIC PLASTICIZER PERFORMANCE IN PVC FOAM
Transcript of POLYMERIC PLASTICIZER PERFORMANCE IN PVC FOAM
POLYMERIC PLASTICIZER PERFORMANCE IN PVC FOAM
PVC foam manufacturers have historically used low molecular weight monomeric esters to plasticize their products. With higher performance expectations and new regulations, we believe there is an unmet need. Hallstar has evaluated polyester adipate plasticizers in PVC foam to provide formulators new tools compared with monomeric esters (DIDP).
Ingredients AD-1 AD-2 AD-3 AD-4 AD-5
Inovyn 367NK (PVC Resin) 100 100 100 100 100
DIDP (Monomeric Plasticizer) 0 20 42.5 65 85Polymeric Adipate Plasticizer 85 65 42.5 20 0
Blowing Agent Mixture 5 5 5 5 5
We compared plasticizers in a ladder study starting with 85phr Polymeric Plasticizer, then 4 additional combinations ending with 85phr DIDP.
Concentration of Polymeric Adipate Plasticizer vs. DIDP
28
27
26
25
24
23
22
0 10 20 30 40 50 60 70 80 90 100
Damping (DMA)
Increasing polymeric concentration improves ability to dissipate energy (dampening of sound and vibrations)
SEM Microscopy of PVC Foam cross-section using polymeric adipate formulation (AD-1). Uniform distribution of cells found, similar to monomeric plasticizers.
Are
a U
nder
Tan
Del
ta C
urve
hallstar.com | © Hallstar, All Rights Reserved. 02/20
500
450
400
350
300
250
200AD-1
Original Physicals
AD-2 AD-3 AD-4 AD-5
445 453
374 376 370
0
-5
-10
-20
-25
-30
-35
-40
-45
AD-1
% Wt Change After Hexane ExtractionAD-2 AD-3 AD-4 AD-5
-4.09-5 -5.89
-7.98
-42.74
At low levels, polymeric esters can provide significant benefit to extraction resistance.
Elo
ngat
ion
(%)
Using Polymeric Adipate plasticizers, we found a 22% increase in elongation.
Hexane extracts the DIDP causing significant shrinkage and loss of flexibility
In a PVC Foam formulation, we found that our polymeric adipate plasticizer matched the cell structure found in a DINP plasticized formulation; but our polymeric adipate outperformed DINP through increasing damping, elongation and hexane extraction.