Relocatable SecurityFence Systems

polmilfence.com

Available to Hire or Purchase

INTRODUCTIONBLOK

MESHUK LIMITED

Manufactured by Blok N Mesh UK Ltd, the unique POLMIL® range of fencingwas originally designed to exceed the stringent counter terror securityspecification for London 2012 Olympic venues, and was also selected toprotect the Glasgow 2014 Commonwealth Games. Further developmenthas resulted in successful PAS 68, CPNI and Mob Attack testing.

PageIntroduction and Contents 2

POLMIL® Range of Fence Systems at a Glance 3

CPNI Assessed BASE Level On-Ground Perimeter Security Fence 4-5

CPNI Assessed PAS 68 Rated On-Ground Perimeter Security Fence 6-7

Pre-Assembled Modular Fence On Vertical Concrete Barrier (VCB) 8-9

Solid Steel On-Ground Hoarding/Visual Screen 10-11

In-Ground T-Post for POLMIL® Security Mesh Panels 12-13

Pedestrian Doors and Locking Options 14-15

Vehicle Gates and Configurations 16-17

Ballast Options: Concrete, Water, Sand 18-19

Hinged Corner Panel and Useful Accessories 20-23

Loading Bay BlokkerTM For Roller Shutter Openings 24

Intruder Delay Cage For Warehouses and Factories 25

National Installation Service and Transportation 26

Company Details and Accreditations 27

With ‘no dig’ policies becoming the preferred option forglobal events and sensitive sites, the on-ground POLMIL®fence offers the same level of security as equivalent in-groundsystems, without need for groundworks or risk tounderground services, and maintains the ability to reliablyhost electronic perimeter intruder detection systems (PIDS).

The robust reusable designs incorporate over 30 years ofspecialist temporary fencing experience, and have resultedin POLMIL® systems being perfectly suited to short term,security-sensitive deployments, or where the fence line mayneed relocating at a later date.

2

POLMIL® SECURITY FENCESYSTEMS AT A GLANCEBASE LEVEL ON-GROUNDSECURITY FENCE (3m High)

Independently Mob Attack TestedCPNI Assessed

PAS 68:2010 RATED ON-GROUNDSECURITY FENCE (2.4m & 3m High)

Independently Mob Attack TestedCPNI Assessed

3PRE-ASSEMBLED, MODULAR VCBSECURITY FENCE (2.4m & 3m High)

Mounted on 2.5 Tonne VCBHeight 2.4m or 3mSingle Face Fence or Double Sided

SOLID STEEL ON-GROUNDSECURITY HOARDING (2.4m High)

Secure visual screeningScaffold support structureWire Extensions to 3m high

IN-GROUND SLOTTED POST FORSTANDARD POLMIL® MESH PANELS

Pre-Slotted T-Posts for concreting inAccepts all Standard POLMIL® PanelsAlso used on extremely steep slopes

CPNI ASSESSED BASE LEVEL SECURITY FENCE 3m HIGH

4BLOK `N' MESH UK LIMITEDHammond Road, Knowsley Industrial Park, Merseyside L33 7ULwww.bloknmesh.comwww.polmilfence.comThe copyright in this drawing belongs to Blok N Mesh UK Ltd and should not be copied orshown to third parties without the express permission of Blok N Mesh UK Ltd.

TITLE01/07/2014

1:20

CDV

T.STEWART

APPROVED

CHECKED

DRAWN

SCALE

DATE

Revision

@A3

T.STEWARTDRAWINGNo.

1013

5045

035

035

035

035

085

0

76,2 76,2

12,7

Ø4

Ø4

3000

INSTALLED OVER EXISTING RAILINGS INDEPENDENTLY MOB ATTACK TESTED

CANTILIVERED TO PREVENT CLIMB AROUND ADAPTED FOR STAIRS

ON-GROUND PERIMETER

The POLMIL® BASE Level on-ground system employs a reinforced 3m high x 2.5m widefully framed round-top Panel for maximum strength, clad with 358 prison mesh to deterattack or climbing, and finishes at ground level to prevent pass under.

The zero trip Base presents no hazard to passers-by, and fully adjustable Support Braces with independent750kg concrete ballast enable the panels to be held verticalregardless of surface levels.

A full height Cover Mesh protects Panel joins and frontClamp Plate bolts, whilst allowing the fence maximumflexibility to follow the ground line.

The POLMIL® BASE Level fence has been assessed byCPNI, and successfully undergone independent MobAttack testing.

All POLMIL® Systems are supplied with a standardlead-free polyester powder coated blue finish (RAL 5001).Other colours and finishes are available to order.

5

AESTHETICALLY PLEASING AND SECURE

UNEQUALLED INSTALLATION FLEXIBILITY

CPNI ASSESSED PAS 68:2010 SECURITY FENCE 3m HIGH

6BLOK `N' MESH UK LIMITEDHammond Road, Knowsley Industrial Park, Merseyside L33 7ULwww.bloknmesh.comwww.polmilfence.comThe copyright in this drawing belongs to Blok N Mesh UK Ltd and should not be copied orshown to third parties without the express permission of Blok N Mesh UK Ltd.

TITLE01/07/2014

1:20

CDV

T.STEWART

APPROVED

CHECKED

DRAWN

SCALE

DATE

Revision

@A3

T.STEWARTDRAWINGNo.

1178

5045

035

035

035

035

085

0

76,2 76,2

12,7

Ø4

Ø4

3000

630

IMP

OR

TAN

T

2.5 TONNE 4x4 @ 30MPH (48KPH) ONLY 2 METRES OF DEFLECTION

FENCE CONTINUED TO FUNCTION INDEPENDENTLY MOB ATTACK TESTED

PAS 68:2010:V/2500 (NIG)/48/90/:20/11.5

ON-GROUND PERIMETER

The POLMIL® PAS 68 rated on-ground system is similar in appearance and flexibility tothe BASE Level, but uses heavier duty support structure to resist high impact force, plusa continuous solid steel restraint strap to progressively absorb energy and prevent ahostile attack vehicle from penetrating the fence.

The excellent performance rating of PAS68:2010:V/2500(N1G)/48/90:2.0/11.5, was further enhanced by official observationsthat, after impact, the vehicle was immobilised, neither afollowing vehicle nor person could pass through, and thefence system continued to function.

The POLMIL® PAS 68 Rated fence is listed in the CPNI

Catalogue of Impact-Tested Security Barriers, and hassuccessfully undergone independent Mob Attack testing.

All POLMIL® Systems are supplied with a standardlead-free polyester powder coated blue finish (RAL 5001).Other colours and finishes are available to order.

7

TECHNICAL RATING: PAS 68:2010: V/2500 (NIG)/48/90/:20/11.5

FLEXIBILE PAS 68 DESIGN IS ALSO EFFECTIVE ON UNDULATING GROUND

RAPID DEPLOYMENT MODULA

8

ACCEPTS STANDARD WIDTH FORKS JOINING PLATES FOR BOLTING UNITS TOGETHER

OPTIONAL GROUND PLATES INCREASE STABILITY OPTIONAL COVER MESH FOR PANEL JOINS

AR VCB SECURITY FENCEThe POLMIL® Modular VCB Fence is based on a 2,500kg, 3 metre long, Vertical ConcreteBarrier with a single-piece weldmesh panel bolted on top to form a modular fence unit.

These narrow, 450mm wide, units are swiftly deployed by aforklift and banksman, with no specialist fencing knowledgerequired. Each section can be fastened together by boltingthrough the tolerant slotted joining plates located at top andbottom of each fence panel.

The POLMIL® VCB has standard forklift slots for ease of lifting,and includes the facility for optional Chapter 8 Ground Plateswhich provide greater stability and recessed bolt-downfacility, when required.

An optional full height cover mesh is available to protect anygaps between the units when deployed on uneven ground.A second, Rear Panel, can also be fitted when double-sidedfencing is required, to prevent climbing from either side, suchas airport deployments.

All POLMIL® Systems are supplied with a standardlead-free polyester powder coated blue finish (RAL 5001).Other colours and finishes are available to order.

9

SINGLE FACE MODULAR VCB SECURITY FENCE WITH 358 MESH

DOUBLE SIDED MODULAR VCB SECURITY FENCE WITH OPTIONAL GROUND PLATES

SOLID STEEL ON-GROUND SE / VISUAL SCREEN

10BLOK `N' MESH LIMITEDUnit 4, Beech Hill Industrial Park Hammond Road,Knowsley Industrial Park, Liverpool, Merseyside L33 7ULTel: 0151 545 3044, Fax: 0151 545 3049

The copyright in this drawing belongs to Protecta Screen Ltd and should not be copied orshown to third parties without the express permission of Protecta Screen Ltd.

NTS

CDV

N.JACKSON

APPROVED

CHECKED

DRAWN

SCALE

DATE

@A2

DRAWINGNo.

16/07/2013

APPROVED

CHECKED

DRAWN

SCALE

DATE

@A2

N.JACKSON

EXTENSION BRACKETS FOR WIRE TOPPING BLOCK CENTRES ADJUSTABLE TO SUIT LOADING

FINISHES SECURELY AT GROUND LEVEL OPTIONAL CABLE CONTAINMENT

CURITY HOARDING

POLMIL® On-Ground Hoarding uses standard Blok N Mesh ‘Fortress’ reinforced profiledsteel panels, with a double post and brace scaffold pole support system, bolted toPOLMIL® 750kg concrete blocks.

Each scaffold post is individually clamped to the top andbottom of the panel with height adjustable channel bracketsand locking bolts. These can be located at any point alongthe fence line, so ballast blocks can be placed at the mostappropriate intervals to suit wind loadings and individualsite conditions.

Steel H sections at each panel join provide security, andextra tolerance, when installing on uneven surfaces, and

multi-adjustable braces ensure the panels can be heldvertical even when traversing sloping ground.

Optional extension pieces (straight or cranked) arepre-welded to the H sections for supporting razor wire.

All POLMIL® Systems are supplied with a standardlead-free polyester powder coated blue finish (RAL 5001).Other colours and finishes are available to order.

11

POLMIL® STEEL HOARDING PROVIDES A SECURE VISUAL SCREEN

SCAFFOLD SUPPORT FOR TOLERANCE AND STRENGTH

IN-GROUND SLOTTED T-POST POLMIL® MESH PANELS

12

MULTI-SLOTTED T POST STANDARD PANELS WITH IN-GROUND POSTS

MINIMUM FOOTPRINT REQUIRED SEAMLESS SECURITY FROM ON-GROUND FENCE

FOR STANDARD

Most POLMIL® systems are on-ground but we also offer an In-Ground T-Post option,when digging is permitted, to provide a more permanent solution with minimal footprint.

This method can also be adopted for installations on extremeslopes, where on-ground ballast is not practical, by stepping1m wide extra high POLMIL® panels, and bolting mesh skirtsto protect any gap below.

The heavy duty pre-slotted T Posts are designed to acceptall standard fully framed POLMIL® mesh fence panels and,

as such, enable our temporary on-ground systems to beconverted into very cost effective permanent in-groundfencing, by re-using the same POLMIL® panels.

All POLMIL® Systems are supplied with a standardlead-free polyester powder coated blue finish (RAL 5001).Other colours and finishes are available to order.

13

CONVERTING ON-GROUND POLMIL® TO IN-GROUND POST, REUSING EXISTING PANEL

ADAPTED FOR FENCING STEEP SLOPES

ON-GROUND PEDESTRIAN DO

14

STANDARD SLIDE BAR LOCK OPTIONAL DEAD LOCK

OPTIONAL DIGI-LOCK EMERGENCY PUSH HANDLE LOCK

OOR, AND LOCKING OPTIONSStandard pedestrian doors are incorporated into the relevant POLMIL® fence panel.This enables a door to be inserted into an existing fence line installation by simplyreplacing a Fence Panel with a Door Panel.

The POLMIL® door opens both ways but can be restricted toone direction only where required.

A range of locking options and combinations are available:Heavy Duty Slide Bar for Padlock – accessible from inside only.British Standard Dead Lock – accessible from inside andoutside. (Often combined with Slide Bar so door can betemporarily locked from outside to enable ‘walk about’).

Combination Digi-Lock – accessible from inside and outside.(Often combined with Slide Bar for more secure lockingout of hours.)Heavy Duty Emergency Push Handle – accessible frominside only.

All POLMIL® Pedestrian Door Panels are supplied with astandard lead-free polyester powder coated blue finish(RAL 5001). Other colours and finishes are available to order.

15

DOOR PANEL IN BASE LEVEL FENCE

DOOR PANEL IN MODULAR VCB FENCE

ON-GROUND VEHICLE GATES

16The copyright in this drawing belongs to Blok N Mesh UK Ltd and should not be copied orshown to third parties without the express permission of Blok N Mesh UK Ltd.

N.T.S.

CDV

T. STEWART

APPROVED

CHECKED

DRAWN

SCALE

DATE

@A3

T. STEWARTDRAWINGNo.

28/04/2015

APPROVEDAPPROVEDAPPROVED

CHECKEDCHECKEDCHECKED

DRAWNDRAWNDRAWN

SCALESCALESCALE

DATEDATEDATE

REV

76,2 76,2

12,7

Ø4

Ø4

SECOND 750KGBALLAST BLOCKWHEN REQUIREDFOR LARGE GATES

SINGLE 750KGBALLAST BLOCK

MULTI-ADJUSTABLEHINGES

2400OR

3000HIGH

STANDARD PANEL

COVER MESH

OPTIONAL CORNERPANEL

STANDARD PANEL

IN-LINE GATESUPPORT BASE(RIGHT HAND)

GATE LEAFS CAN OPENIN BOTH DIRECTIONS

CLAMP PLATES

GATE POST

BRACE PLATE

M16 BOLT

M16 BOLLT

ADJUSTABLEBRACE

DETAIL ADETAIL A

SELF SUPPORTING ON-GROUND GATE POSTS ACCEPTS ADDITIONAL KENTLEDGE FOR LARGER GATES

MULTI-ADJUSTABLE HINGES SIMPLIFY INSTALLATION OPTIONAL DROP BOLT LOCKING BRACKET SET

, AND CONFIGURATIONSThe standard POLMIL® Vehicle Gates can open both ways and have a 4.4m clear opening(2x2.2m gate leafs), with other sizes available to order.

Both gate posts are independently supported and featuremulti-adjustable hinges to provide maximum verticaland horizontal tolerance, making the gate leaf installationvery simple.

A heavy duty slide bar locking mechanism (for padlock),and drop bolts to hold the gate leafs open or closed.

Optional in-fill meshes close off gaps between gate leafsand posts, if required.

Special VCB supported, multiple Vehicle Gates, are availableas pedestrian ‘Blow-Out’ Gates to enable large numbers ofpeople to pass through with minimum obstruction.

All POLMIL® standard Vehicle Gates are supplied with alead-free polyester powder coated blue finish (RAL 5001),and high visibility posts. Other colours and finishes areavailable to order.

17

STANDARD IN-LINE GATES ARE AVAILABLE IN A RANGE OF SIZES

MULTIPLE BLOW-OUT GATES SUPPORTED BY NARROW VCBs TO MINIMISE OBSTRUCTION

ON-GROUND BALLAST OPTIO AND SAND

CONCRETE BALLASTThe standard POLMIL® Safe-Blok weighs 750kg. Each 50newton concrete kentledge block has a 120 year design life,and is ultimately easier to recycle as it does not containsteel reinforcement.

An important feature is the integral lifting pin so the Safe-Blokcan be carried from above (using our certified lifting clutch)

enabling safe handling, and precise placement, even whenworking on unlevel ground. It also allows the fork lift truck toapproach a fence line from any angle to place the block,which greatly assists when working in confined spaces, oralongside other trades.

Transport: 38no. SafeBloks per wagon (UK)

18

NS: CONCRETE, WATER

19

SAND BALLASTThe POLMIL® multiple-use BagBlok is availablewith a 350kg or 500kg dry sand capacity, andintended to accept any granular material which canbe sourced locally to the installation. We pack 100Bags and Lids on one Pallet.

Special integral gussets ensure the bag remainssquare, and does not sag out of position orbulge against the fence. Corner lifting loopsand full length forklift sleeves are standard,

to be compatible with most methods ofmechanical lifting.

Each BagBlok is provided with a separate anti-tamper printable Lid which protects the bag fromUV light and prevents unauthorised access to theballast material contained within.

Transport: 2000no. Bags and Lids per wagon.

WATER BALLASTPOLMIL® designed and developed the WaterBallast Tank for installations where mechanicallifting is not suitable, or environmentalconsiderations take priority. The recycled plasticTanks have a smaller carbon footprint thanconcrete and require significantly less transport.

They can be manually carried to the fence line, andfilled with water pumped from up to 500m away. Each Tank weighs 20kg empty and has a capacityof 335litres which provides a total of 355kg whenfull. The interlocking tanks securely join togetherfor when additional kentledge is required.

Transport: 144no. empty Tanks per wagon.

HINGED CORNER PANEL AND

20

SETTING OUT SPACER SAFE-BLOK LIFTING CLUTCH

MULTI-PURPOSE 90o BOLTING BRACKET PANEL LIFTING CABLES

HINGED CORNER PANELThe POLMIL® Hinged Corner Panel can be used with all POLMIL® Mesh Fence Systems to create a smooth and securechange of direction without special brackets or cover mesh. This multi-adjustable Panel is supplied pre-assembled as a singleunit, for ease of installation. All POLMIL® Systems are supplied with a standard lead-free polyester powder coated blue finish(RAL 5001). Other colours and finishes are available to order.

USEFUL ACCESSORIES

21

BOLT-ON NEEDLE TOP CLIMBING DETERRENT

BOLT-ON T-BRACKET FOR RAZOR WIRE

SLOTTED CLAMPING PLATE BOLT-ON GROUND SKIRT

ADDITIONAL USEFUL ACCESS

22

CABLE CONTAINMENT TRAYS

START/STOP BRACKET OFFSETS BALLAST FROM START/END OF RUN

ORIES

23

CABLE CONTAINMENT HOOKS

ANTI-TUNNEL MESH

LOADING BAY BLOKKERTM

FOR ROLLER SHUTTER OPENINGS

24

BLOK `N' MESH UK LIMITEDHammond Road, Knowsley Industrial Park, Merseyside L33 7ULwww.bloknmesh.comwww.polmilfence.comThe copyright in this drawing belongs to Blok N Mesh UK Ltd and should not be copied orshown to third parties without the express permission of Blok N Mesh UK Ltd.

TITLE11/04/2015

1:25

CDV

T.STEWART

APPROVED

CHECKED

DRAWN

SCALE

DATE

Revision

@A3

T.STEWARTDRAWINGNo.

76,2 76,2

12,7

Ø4

Ø4

450

2400

20

or30

00

300850

1500

800

1600

or22

0030

045

0

300

450

190

3150

1020

600

LOADING BAY BLOKKERTM ARRIVES PRE-ASSEMBLED INCLUDES STANDARD WIDTH FORK SLOTS

OPTIONAL HIGH STABILITY GROUND PLATES ADJUSTABLE WORKING WIDTH UP TO 3600mm

The POLMIL® Loading Bay BlokkerTM is a single lift on-ground solution for preventing unauthorised movement through rollershutter door openings in warehouses and distribution centres. With an overall weight of 2.7tonnes and 3metres high 358‘prison’ mesh steel panels, the standard Loading Bay BlokkerTM can adjust up to a maximum width of 3.6 metres (larger widthsavailable to order). The optional High Stability Ground Plates also enable the unit to be bolted down if required.

INTRUDER DELAY CAGEFOR WAREHOUSES AND FACTORIES

25

The POLMIL® Intruder Delay Cage is designed to significantly delay intruders after a successful forcedentry through an exit door. The cage’s steel door can be supplied with a range of standard lockingoptions, or left ‘blank’ for the customer to fit their own preference. These re-locatable systems arepolyester powder coated high visibility red, supplied flat packed for cost effective transport, and includesimple instructions for assembly on site. Other colours available to order.

SIMPLE TO ASSEMBLE (2 PERSONS) WELDED CLEATS PROVIDE M12 FIXING POINTS

90o BOLT-ON BRACKETS FOR UNEVEN WALLS FLAT PACKS FOR SHIPPING

INSTALLATIONAND TRANSPORT

26

STEELWORK SUPPLIED IN RETURNABLE STILLAGESFULL WAGON: 300LM 3m HIGH OR 400LM 2.4m HIGH

SAFE-BLOK 750KG CONRETE BALLAST BLOCKFULL WAGON: 38 BLOCKS - 90LM (28,500KGS)

VCB MODULAR FENCE ARRIVES PRE-ASSEMBLEDFULL WAGON: 10 UNITS = 30LM

ALTERNATIVE BALLAST OPTIONSFULL WAGON: 144 TANKS, OR 2,000 BAGS AND LIDS

General purpose installation is available Nationwide with our own teams of experienced operatives. For specialistinstallations such as Airside, Nuclear or Security Sensitive sites we have approved installers with POLMIL® experience andsecurity accreditation to at least SC level, and many up to DV.

UK TRANSPORTATION

POLMIL®

CONTACT DETAILS

27

POLMIL® Fencing is designed and manufactured by Blok N Mesh UK Ltd.Part of the family owned Crownlea Group of companies established in 1969.

PAUL GILLIGANGeneral Manager

paul.gilligan@polmilme.com+974 6652 1197WorldSIM: +44 7452 039 118Skype: paul_gilligan

POLMIL MIDDLE EASTAND WEST AFRICACONTACT:

The Dubai World Central Free Zone,P.O. Box 282228, Dubai, U.A.E

+971 0567 987 902

HEAD OFFICE:

7th Floor, Al Reem Tower West Bay.P.O. Box 30747 Doha, Qatar

+974 6652 1197

QATAR OFFICE:

Crown House, 30 Commerce Road,London TW8 8LE, UK

+44 (0)7967 654 897

UK OFFICE:

polmilfence.com

Paul GilliganTel: + 974 6652 1197

POLMIL® RAPID DEPLOYMENTMODULAR VCB FENCE