Polishing Kit G Instructions
-
Upload
allchem-italy -
Category
Documents
-
view
227 -
download
0
description
Transcript of Polishing Kit G Instructions
429.0000.11
3 days Training Program
Complete Finishing Kit ‘’G’’
Made in ItalySince 1957
FINISHING KIT “G’’
What is VIRTUS?
VIRTUS is the brand of our high-quality product line for
Bodywork, Industry and Naval.
!+50 years of study and experience in developing our products,
the best result is assured.
!The constant chemical research, carried out in Allchem’s labs,
directed to the creation of products which respect the
environment and operator’s health.
!The best for car care, car polishing and car refinish.
FINISHING KIT “G’’
FINISHING KIT “G’’
Why VIRTUS?
!Economical
Budget wise
Best result that last !!What is Finishing kit “G’’? Has all the accessories needed for a perfect finish without haze
and holograms
FINISHING KIT “G’’
436 EXTRA COARSE CUT RUBBING COMPOUND
!Applicable for the treatment of painted surfaces which shown minimum and medium-sized
defects. Applicable by machine. Excellent on both old and fresh paint. Extraordinary for
ceramic paints and clear coats Ultra High Solid (soft). Use Foamed Wool Pad for the removal
of sanding marks and finish with White/Black Foam Pad for a High glossy finish without halos
and opacity. USE 436 EXTRA COARSE CUT for definitive removal of defects such as
P1200-1500 sanding marks, leaving a high final gloss. CLEAR ACTION Product designed and
developed for a fast and clean use without addition of water. It allows you to see
immediately the removal of the defect. Reduced working time DEFINITIVE REMOVAL OF THE
DEFECT. USAGE On all automotive paints, included: acrylics, water-based, high solid LOW
VOC, two-component, single-component and OEM auto products. Perfect to use on marine
gelcoat. Suitable for ceramic anti-scratch paints and new water-based clear coats.
APPROVED Ammonia & silicone free LOW V.O.C. Contains a very low VOC content for a better
environmental conditions. HEALTH & SAFETY Non irritant, non harmful, Non flammable.
Available into the kit by request.
FINISHING KIT “G’’
476 ONE STEP CUT & POLISH – POLISHING GEL AND RUBBING COMPOUND
!Applicable for the treatment of painted surfaces which shown minimum and medium-sized
defects. Applicable by machine. Excellent on both old and fresh paint. Extraordinary of
ceramic paints and clear coats Ultra High Solid (soft). Use Foamed Wool Pad for the removal
of sanding marks and finish with White/Black Foam Pad for a High glossy finish without
halos, opacity and holograms.
USE Abrasive liquid for definitive removal of defects such as P1500-2000 sanding marks,
leaving a high final gloss in one single step.
CLEAR ACTION Product designed and developed for a fast and clean use without addition of
water. It allows you to see immediately the removal of the defect. Reduced working time
DEFINITIVE REMOVAL OF THE DEFECT The product doesn’t hide imperfections, scratches and
holograms with cosmetic oils, but it removes them permanently.
USAGE On all automotive paints, included: acrylics, water-based, high solid LOW VOC, two-
component, single-component and OEM auto products. Suitable for ceramic anti-scratch
paints and new water-based clear coats. Perfect for gelcoat. APPROVED Ammonia & silicone
free LOW V.O.C. Contains a very low VOC content for a better environmental conditions.
HEALTH & SAFETY Non irritant, non harmful, Non flammable.
FINISHING KIT “G’’
473 CERAMIC ABRASIVE POLISH – MEDIUM/FINE CUT
!A specially formulated super fine glaze designed to polish out any residual swirl
marks which can occur on problem colour dark paint finishes eg. blacks.
Produces a superb high gloss finish with no greasy/smearing problems and
holograms free. All automotive paint systems including water based, high solid,
single component and 2-pack, acrylic, cellulose, synthetic, anti scratches clear
coats, OEM finishes and gelcoat.
FINISHING KIT “G’’
472 / 472FAST HOLOGRAM FREE ULTRAFINE CUT Abrasive liquid for removal of defects on OEM, for body shops, detailers and
nautic. Gives back glossy and removes scratches and holograms. Removes the
defects of coating such as sandpapering marks, scratching of carwash services,
oxidating of the coats ecc.. Renews the glossy to dull and oxidized paints with
few simple operation.
The product does not hide blemishes or scratches with cosmetic oils, but
eliminates them forever. Appliable on all kinds of coats, included: acrylics, water
based, high solids, two components, monocomponents and original products of
OEM car brands. Excellent for antiscratch ceramic paints finishing and new low
V.O.C. clear coats.
472FAST remove sanding scratches of P1500 with Foamed Wool Pad or P2000
with Medium Foam Pad. !Soon available 472PLUS: More cutting power with Hologram Free Finish
FINISHING KIT “G’’
475CUT POLISH & PROTECT - 3 in 1
HOLOGRAM FREE FAST CUT !Abrasive liquid for removal of defects for body shops, detailers and nautic. Gives
back glossy and removes scratches and holograms. Removes the defects of
coating such as sandpapering marks, scratching of carwash services, oxidating
of the coats ecc.. Renews the glossy to dull and oxidized paints with few simple
operation.
The product does not hide blemishes or scratches with cosmetic oils, but
eliminates them forever. Appliable on all kinds of coats, included: acrylics, water
based, high solids, two components, monocomponents and original products of
OEM car brands. Excellent for antiscratch ceramic paints finishing and new low
V.O.C. clear coats.
475 CUT POLISH & PROTECT remove sanding scratches of P1500 with Foamed
Wool Pad or new Purple Cutting Foam Pad and leave the paint sealed and
protected for a very long time.
FINISHING KIT “G’’
453 PTFE PROTECTIVE POLISH
!PTFE polish (hand or machine wax), produce high gloss
with easy application. Restore the original colour and
provides a durable finish. For use by hand or by machine
(700-1800 rpm).
FINISHING KIT “G’’
471 SPRAY POLISH
POLYMER+PTFE+NANOTECHNOLOGY
ANTISTATIC ACTION
!Is a burnishing spray polish suitable for all types of
paint, plastic, rubber, dashboard, gel coat, glass, etc.
The burnishing action permits an excellent finish on all
types of paint, including delicate colors and black
coats.
Excellent for the removal of traces of abrasive paste,
haloes, etc.. and also suitable for
WATER-LESS CAR WASH. !Is the best solution to use with PolyDisk & PolySponge.
FINISHING KIT “G’’
463 HOLOGRAM FREE PAINT PROTECTION SYSTEM
!Protects the car for 24 months or 12 car washes.
Eliminates minor defects. Eliminates all holograms.
Renews and protects all types of paint & gelcoat (excellent for
metallic and double layer and 2K).
Forms a water-proof, glossy and long lasting molecular
protection film. Can be easily applied and
removed.
UV protected.
Apply 463 on surface with DA polisher
or orbital sander, wait 30-60 minutes
and wipe off with a microfibre cloth.
!Resistant to 150 hand washes.
FINISHING KIT “G’’
467 GLASS CLEANER & PROTECT
!Spray directly to glass and wipe off using
the GLASS & MIRROR ULTRAMICROFIBRE
CLOTH made specially for glasses.
!Soon available 467 ANTISCRATCH GLASS
CLEANER
FINISHING KIT “G’’
692 POLYDISK, CONTAMINATION REMOVER
!Polydisk works fast and achieves professional results with
the new advanced rubber polymer technology, which
replaces the use of clay bars. With dual action orbital
polisher, it safely and easily removes paint over spray,
water spots, tree sap, rail dust and other bonded surface
contaminants from the surface of automotive paint, glass,
moldings and plastic. Polydisk works great with only 471
Polymer Spray Polish lubricant. Unlike the clay bar, the
Polydisk can be cleaned by simply rinsing off the
accumulated contaminates with water.
If you drop the Polydisk on the ground, no worries, Just
rinse the sponge pad clean and you’re ready to keep using it.
471 Polymer Spray Polish allows for sturdy and controlled
handling, unlike clay bars where constant reshaping is
required. There is a significant difference between Virtus
Polydisk and clay bars. An outstanding machine/advanced
polymer Combination makes Virtus Polydisk the best
contamination removal tool ever.
FINISHING KIT “G’’
BLACK FINISHING FOAM PAD
High density extra-soft grey sponge for a perfect
finishing with polishes and wax. The gradually curved
surface (patented) called VARIABLE CONTACT, eliminate
splashes during finishing. Allow the operator a perfect
control of the finishing work. Washable and highly
resistant. For protection application.
WHITE FINISHING FOAM PAD
High density, soft white sponge for a perfect finishing
and removal of marks. The gradually curved surface
(patented) called VARIABLE CONTACT, eliminate splashes
during finishing. Allow the operator a perfect control of
the finishing work. Washable and highly resistent.
FINISHING KIT “G’’
FOAMED WOOL PAD
A softer foamed wool pad, for new generation coats
finishing. Fast finishing, even with medium-fine abrasive
liquids. Does not leave finishing marks. High glossy. To
be combined with 473 OEM CERAMIC ABRASIVE POLISH,
to remove even new anti scratch clear coats marks.
Available purple & white color.
YELLOW ABRASIVE FOAM PAD
High density extra-soft grey sponge for a
perfect finishing with polishes and wax. The
gradually curved surface (patented)
called VARIABLE CONTACT, eliminate splashes
during finishing. Allow the operator a perfect
control of the finishing work. Washable and
highly resistant.
FINISHING KIT “G’’
PURPLE CUTTING FOAM PAD
High density purple sponge for a perfect cutting,
polishing, finishing and sealing with 475.
The compressed line surface (patented) eliminate
splashes during finishing. Allow the operator a perfect
control of the finishing work. Washable and highly
resistant. Cutting action similar to the wool pad.
PURPLE CUTTING FOAM PAD
High density purple sponge for a perfect cutting,
polishing, finishing and sealing with 475.
The multiholes surface (patented) release gradually the
products duringpolishing. Allow the operator a perfect
control of the finishing work. Washable and highly
resistant. Cutting action similar to the wool pad.
FINISHING KIT “G’’
PURPLE CUTTING FOAM PAD
High density purple sponge for a perfect cutting,
polishing, finishing and sealing with 475.
The multiholes surface (patented) release gradually the
products duringpolishing. Allow the operator a perfect
control of the finishing work. Washable and highly
resistant. Cutting action similar to the wool pad.
DA POLISHER CUTTING & POLISHING PAD
Advanced technology pads for a perfect cutting,
polishing & finishing to use with DA orbital polishers.
Allow the operator a perfect control of the finishing
work. Washable and highly resistant. Cutting action
similar to the wool pad.
FINISHING KIT “G’’
SOFT BACK-UP PLATE
Strong, with highest grade hook material available.
Unique back-up plate with soft rubber for polishing
without scratches.
DETAILERS MASKING TAPE
Cover sharp edges, corners and rubber trims and don’t leave
residue on paint.
FINISHING KIT “G’’
FOAM PAD CLEANING BRUSH
To be used to clean foam and wool
pads avoiding damages and extend
pads life.
ULTRAMICROFIBER
Microfiber cloth for polishing without marks.
To be used without detergents, just wet with
water or dry.
FINISHING KIT “G’’
BY REQUEST AVAILABLE ACCESSORIES
FINISHING KIT “G’’
ULTRAMICROFIBER – NO SCRATCHES ON THE CAR
With our apron you can do safe finish because is made
with our best Ultramicrofiber. No scratches on the paint
of car. The lock can help You to fix the cord of polisher.
Is washable by wash machine and can be used for
remove compound and polishes from paint.
FINISHING KIT “G’’
LONG LIFE ABRASIVE SANDING FILM
For sanding light scratches, prior to polishing.
Easy to use with the sanding block.
P800
P1500
P2000
436 – Extra Coarse cut compound for old or fresh
paint for the removal of orange peel, sanding marks,
swirl marks and light scratches. Can be use with
foamed wool pad followed by yellow foam pad or
yellow foam pad only. Perfect for DA polisher. !476 – One step polish on either old or fresh paint for
the removal of sanding marks, swirl marks and light
scratches. Can be use with foamed wool pad followed
by yellow foam pad or yellow foam pad only.
473 – First step polish for any type of paints.
Depending on the paint condition 473 can be used
with the foamed wool pad followed by the yellow foam
pad to remove heavy swirls and scratches. Can be use
with yellow pad only if light swirls are to be removed.
472FAST – Hologram remover best for solid color
paints. Applicable by machine ( low speed maximum
2500rpm and slow movement ) with the white foam
pad to remove holograms and pad marks.
472 – Hologram remover. It is the last step on
polishing prior to application of protection. Applicable
by machine ( low speed maximum 2500rpm and slow
movement ) with the white foam pad to remove
holograms and pad marks. !453 – High gloss paint protection with PTFE. It can be
applied by machine or by hand with the black foam
pad. Can be wiped off immediately.
463 – Super high gloss Nano paint protection. Can be
applied by hand. Orbital machine application for best
result. Wait for a minimum of 30 minutes and wipe off
with a microfiber cloth.
471 – Spray polish suitable for paints, plastics and
rubber trims and dashboard. It can be used for dry
cleaning the car.
Polydisk – Use for the removal of paint contamination
and overspray. Can be use by hand or machine with
either 471 or water.
PRODUCTS
STEPS 1 WASHING WITH SHAMPOO or WATERLESS CAR WASH
!Wash the car with car
shampoo or with 471
SPRAY POLISH and one soft
& clean microfibre cloth
STEPS 2 DECONTAMINATION
Remove the contamination from all car parts with POLYDISK / POLYSPONGE & 471 SPRAY POLISHSpray over the car 471 SPRAY POLISH and work over with POLYDISK (by hand or by orbital sander or dual action polisher) to remove all contamination like paint over spray, water spots, tree sap, rail dust, mosquitos and other bonded surface contaminants.
STEPS 3 SCRATCH REMOVER
Remove deep scratches with
472FAST and Foamed Wool
Pad with rotary polisher at
medium speed. !Follow with 472FAST and
White Foam Pad to give
perfect finish Hologram Free
and glossy. !Defect of paint / holograms
will never coming back (one
day later or after a car wash).
Is not a filling product.
472FAST is cutting for the
first 15-20 seconds of work
and later is finishing.
Use 472FAST and foam pad in
one step to remove light
scratches.
STEPS 4 REGULAR PROTECTION
Apply 453 GLOSSY PTFE wax
with BLACK SOFT FOAM PAD
and low speed polisher or
by hand with a clean
Microfibre Cloth.
!Very easy to apply and
remove.
!Restore the original colour
and provide a durable
finish.
STEPS 4 alternative LONG LIFE PROTECTION
Apply 463 PAINT PROTECTION SYSTEM with BLACK SOFT FOAM PAD and rotary or orbital polisher !PROTECTION CURING TIME Wait between 30 to 60 minutes before to wipe off !CLEANING Wipe off with a clean microfiber towelAfter 1 hour is possible to make the water repellency test. !The surface is protected against UV Rays.
STEPS 5 GLASS CLEANING
Apply 467 GLASS CLEANER
and wipe off with GLASS &
MIRROR Ultramicrofibre
Cloth.
!Very easy to apply.
!467 GLASS CLEANER has a
vertical stability; don’t
runs.
!GLASS & MIRROR
Ultramicrofibre Cloth clean
all surfaces perfectly
without traces.
STEPS 6 DASHBOARD & PLASTIC CLEANING
Apply 471 and wipe off with
GLASS & MIRROR
Ultramicrofibre Cloth.
!Very easy to apply.
!467 GLASS CLEANER leave
the surfaces “ANTISTATIC”
dust repellent.
!471 & Ultramicrofibre Cloth
clean and protect all
surfaces like paint, glasses,
mirrors, plastics, rubbers,
leather seats and
dashboard.
STEPS 7 WELLS CLEANING
Apply 472 FAST with FOAM
CONE to remove scratches
or contamination from
weels.
!Wipe off with Grey
Microfibre cloth.
1 STEP - WASHING
Wash the car with car shampoo or
with 471 SPRAY POLISH and one
soft & clean microfibre cloth !2 STEP - DECONTAMINATION
Remove the contamination from all
car parts with POLYDISK & 471
SPRAY POLISH
3 STEP – SCRATCH REMOVER
Remove deep scratches with
472FAST and Foamed Wool Pad
with rotary polisher at medium
speed !4 STEP – FINAL GLOSS
Continue to work on surface with
472FAST and WHITE FOAM PAD
untill all defects are removed !5 STEP – CLEANING SURFACE
Wipe off very well with a clean
Microfiber Towel !6 STEP – PAINT PROTECTION
Apply 463 PAINT PROTECTION
SYSTEM with BLACK SOFT FOAM
PAD and rotary / orbital polisher
(Alternative to Step 4) !7 STEP – PROTECTION CURING TIME
Wait between 30 to 60 minutes
before to wipe off !8 STEP - CLEANING
Wipe off with a clean microfiber
towel !9 STEP - GLASSES PROTECTION
Clean all glasses with 467 GLASS
Cleaner or make a protection with
Nano Glass
10 STEP – DASHBOARD + INTERIOR
Clean the dashboard and interior
plastic parts with 471 SPRAY
POLISH and microfiber towel !11 STEP – FABRIC PROTECTION
Protect carpet, moquettes and
seats with 465 Fabric Protector
using a mask and in well aerated
area !12 STEP – WHEELS CLEANING
Polish wheels with 472FAST and
Foam Cone Yellow or Black
depending of scratches to be
removed !!!And soon many other products
will be added.
STEPS
Code Descrip+on UM Size Pcs350.0000.00 GUIDA "FINISHING SYSTEM" Nr. 20 cm x 20 cm 1
360.0190.46 ABRASIVE FOAMED WOOL PAD Nr. Ø 7" = 180mm 2
351.1585.46 ABRASIVE YELLOW FOAM PAD Nr. Ø 6,5" = 165mm 1
351.1685.46 POLISHING WHITE FOAM PAD Nr. Ø 6,5" = 165mm 2
351.1785.46 FINISHING GREY FOAM PAD Nr. Ø 6,5" = 165mm 2
351.0402.42 BACK-UP PLATE FOR WOOL AND FOAM PAD Nr. ø 150mm / 14mm 1
376.0045.89 POLISHING PAD CLEANING BRUSH Nr. Pcs 1
476.0500.12 476 GREEN • RUBBING COMPOUND • EXTRA FAST CUT Nr. 500 ml 1
473.0500.12 473 FUCSIA CERAMIC ABRASIVE POLISH • MEDIUM/FINE CUT Nr. 500 ml 1
472.0508.12 472 GREEN • RUBBING COMPOUND HOLOGRAM FREE • ULTRAFINE FAST CUT Nr. 500 ml 1
472.0500.12 472 BLUE• RUBBING COMPOUND HOLOGRAM FREE • ULTRAFINE CUT Nr. 500 ml 1
453.0500.12 453 GLOSSY PINK KRYTOX® POLISH with PTFE Nr. 500 ml 1
471.0500.12 471 SPRAY POLISH – Polymer spray for paint, glasses, rubbers, plastics, dashboard, etc… Nr. 500 ml 1
463.0500.12 463 PAINT PROTECTION SYSTEM – Long life protection polish Nr. 500 ml 1
467.0500.12 467 GLASS CLEANER – Clean & protect all glasses and mirror Nr. 500 ml 1
692.0150.01 692 POLYDISK Contamination Remover Nr. Ø 160mm 1
360.4044.24 BLUE POLISH ULTRAMICROFIBER CLOTH Nr. 40 x 40 cm 2
360.4040.24 BLUE GLASSES ULTRAMICROFIBER CLOTH Nr. 40 x 40 cm 2
917.0000.02 BLUE ULTRAMICROFIBER APRON Nr. Pcs 1
370.0800.00 ABRASIVE FILM SANDING DISC Ø 42mm P800 Nr. P800 10
370.1500.00 ABRASIVE FILM SANDING DISC Ø 42mm P1500 Nr. P1500 10
370.2000.00 ABRASIVE FILM SANDING DISC Ø 42mm P2000 Nr. P2000 10
350.0000.04 PLASTIC HOLDER BLOCK for sanding discs ø 42mm Nr. Kit 1
597.1951.48 DETAILER MASKING TAPE Nr. 19mm x 50m 1330.0000.400.19
VIRTUS PRO CAP Nr. L 1330.0000.400.20
VIRTUS PRO – PROFESSIONAL DETAILER T-SHIRT Nr. M-L-XL-XXL 1
429.0000.00 PLASTIC CASE HOLDER Resistant to 100 kg Nr. Pcs 1
CONTENT OF POLISHING KIT “G”CONTENT OF POLISHING KIT “G”
THANK YOU FOR USING
VIRTUS COMPLETE
FINISHING KIT “G”
www.allchem.it
ALLCHEM SRL Via Azzano S. Paolo, 32/C
24050 GRASSOBBIO BG ITALY !Tel. +39-035-525616 Fax +39-035-526199
[email protected] www.allchem.it skype: ferroall !ALLCHEM CATALOGUES!
http://issuu.com/allchem_virtus!!ALLCHEM YOUTUBE !
PROFESSIONAL & DO IT YOURSELF!http://www.youtube.com/user/FerroItaly!!
VIRTUS 297 HHS CLEAR COAT SELF CLEANING & HYDROPHOBIC!http://youtu.be/B3EWhuptO-w!http://youtu.be/bqsiUuu5TUw!!
POLISHING KIT!http://gigapan.com/gigapans/124885!http://gigapan.com/gigapans/142210!
www.allchem.it