POLISH Pro · nail wipe saturated with Cleanse. SteP 1 A gentle light buffing to remove surface...
2
NSI (UK) Ltd James Nasmyth Way Eccles Manchester M30 0SF Telephone: 0161 788 2860 | Fax: 0161 788 2861 Email: [email protected] | www.nsinails.co.uk POLISH Pro NSI Polish Pro is a revolutionary light-cured polish formula that lasts an unbelievable two weeks without chipping, smudging, or cracking. Polish Pro can be dried in minutes under a UV or LED lamp meaning your clients can have perfectly polished nails in under 20 minutes that will last them up to 2 weeks and what’s more, Polish Pro can be soaked off in just 10 minutes! Find out more about Polish Pro and see the full range of products on our website: www.nsinails.co.uk SEE PAGE 2 FOR POLISH PRO QUESTIONS & ANSWERS After approximately 10 minutes remove the nails from the acetone. The polish should have lifted away from the nail. Use a cuticle stick to gently remove any remaining polish from the nail plate. If some of the polish is still attached to the nails return to the acetone for a few more minutes. STEP 3 To help the removal process, lightly buff the surface of the gel to remove the shine. This will allow the acetone to penetrate the polish and speed up the removal process. This is not a necessary step but can speed up removal STEP 1 Pour a small amount of acetone into an easysoak bowl (just enough to cover the nail) cover the hands with the easysoak lid and soak the nails for 10 minutes. STEP 2 Once all the polish has been removed your client is ready to have a new polish manicure or apply Nurture Oil to the cuticle area. STEP 4 Soaks off in just 10 minutes! Polish Pro Application Condition the cuticle with a drop of Nurture Oil. With no additional drying time, your client will love chip-proof, smudge- free color for a full two weeks the mani of her dreams. STEP 6 Apply a very thin layer of the Polish Pro color, capping the edges. This layer should look translucent. Cure for two minutes. Apply a second thin coat of color and cure for another two minutes. STEP 5 Apply a thin layer of Polish Pro Top Coat and cure for two minutes. Remove the tacky layer with a Nail Wipe saturated with Cleanse. STEP 4 After shaping the free edge of the natural nail remove the cuticle using Vanish. Remove left over Vanish with a Nail Wipe saturated with Cleanse. STEP 1 A gentle light buffing to remove surface oils will improve adhesion. Clean and dehydrate using Nailpure Plus on a Nail Wipe. STEP 2 Apply one extremely thin layer of Polish Pro Base Coat to all five fingers. Be sure to cap the edges. Cure in the 36-watt UV Bonding Lamp for ten seconds. STEP 3
Transcript of POLISH Pro · nail wipe saturated with Cleanse. SteP 1 A gentle light buffing to remove surface...
NSI (UK) Ltd James Nasmyth Way Eccles Manchester M30 0SF
Telephone: 0161 788 2860 | Fax: 0161 788 2861 Email: [email protected] | www.nsinails.co.uk
POLISH ProNSI Polish Pro is a revolutionary light-cured polish formula that lasts an unbelievable two weeks
without chipping, smudging, or cracking. Polish Pro can be dried in minutes under a UV or LED
lamp meaning your clients can have perfectly polished nails in under 20 minutes that will last
them up to 2 weeks and what’s more, Polish Pro can be soaked off in just 10 minutes!
Find out more about Polish Pro and see the full range
of products on our website: www.nsinails.co.uk
See page 2 for poliSh pro QueStionS & anSwerS
After approximately 10 minutes remove the nails from the acetone. The polish should have lifted away from the nail. Use a cuticle stick to gently remove any remaining polish from the nail plate. If some of the polish is still attached to the nails return to the acetone for a few more minutes.
SteP 3
To help the removal process, lightly buff the surface of the gel to remove the shine. This will allow the acetone to penetrate the polish and speed up the removal process. This is not a necessary step but can speed up removal
SteP 1
Pour a small amount of acetone into an easysoak bowl (just enough to cover the nail) cover the hands with the easysoak lid and soak the nails for 10 minutes.
SteP 2
Once all the polish has been removed your client is ready to have a new polish manicure or apply Nurture Oil to the cuticle area.
SteP 4
Soaks off in just 10 minutes!
Polish Pro Application
Condition the cuticle with a drop of nurture oil.
With no additional drying time, your client will love chip-proof, smudge-free color for a full two weeks the mani of her dreams.
SteP 6
Apply a very thin layer of the polish pro color, capping the edges.
This layer should look translucent. Cure for two minutes.
Apply a second thin coat of color and cure for another two minutes.
SteP 5
Apply a thin layer of polish pro top Coat and cure for two minutes.
Remove the tacky layer with a nail wipe saturated with Cleanse.
SteP 4
After shaping the free edge of the natural nail remove the cuticle using Vanish.
Remove left over Vanish with a nail wipe saturated with Cleanse.
SteP 1
A gentle light buffing to remove surface oils will improve adhesion.
Clean and dehydrate using nailpure plus on a nail wipe.
SteP 2
Apply one extremely thin layer of polish pro Base Coat to all five fingers. Be sure to cap the edges.
Cure in the 36-watt uV Bonding lamp for ten seconds.
SteP 3
POLISH Proyour questions answered...
What lamp do I need?Polish pro requires a 36-watt lamp or LED light to fully cure. If you are using a smaller watt lamp you will need extend the curing time of the polish.
Can I use the Polish Pro over enhancements?Yes, the Polish is fine to use over both Gel and Acrylic enhancements.
Can I use Glaze ‘n Go over Polish Pro?No, Glaze ‘n Go with cause the polish to crack. The Polish Pro top coat will give the nails a high shine.
Why is the Polish Pro bubbling?This is due to the polish being applyed too thickly. Your first layer of colour should be thin and look translucent.
Can the polish be infilled?As with a regular nail polish when your client returns to the salon after 2 weeks we would recommend removing the existing polish and re-applying.
What are the benefits of this product?Polish pro is ideal for natural nail care clients who want longer lasting colour. The polish is easy to apply and can be easily removed.
How many colours will there be?Polish Pro will be available in 24 colours including 3 designed for French manicure. All colours will be available by January 2011. The colours can also be layered over each other to create new colours.
Will there be a clear polish?You don’t need an individual clear, simply applying 2 coats of the base coat followed by the top coat will give you a clear lacquer look.
What price can I charge for this service?We would recommend marketing this service as a Luxury Manicure. Prices are dependant on your area and the prices you charge for a standard manicure but a good starting point would be £20-£25 per service.
How many sets will I get out of the 15ml bottles?The Polish Pro offers great value for money at just £14.95. The Base Coat & Top Coat will give approximately 40 sets and a 15ml Colour approximately 20 sets.
NSI (UK) Ltd James Nasmyth Way Eccles Manchester M30 0SF
Telephone: 0161 788 2860 | Fax: 0161 788 2861 Email: [email protected] | www.nsinails.co.uk
