P.O Box : 55752 Doha Qatar, Tel : +974 4468 6317 / +974 ...ASTM A490M As Processed ASTM A307M...
Transcript of P.O Box : 55752 Doha Qatar, Tel : +974 4468 6317 / +974 ...ASTM A490M As Processed ASTM A307M...
-
P.O Box : 55752 Doha Qatar, Tel : +974 4468 6317 / +974 4468 3968
Fax : +974 4468 3594, Email : [email protected]
www.edge-engineering.net
-
2
-
Fastening together the vision of QATAREdge Engineering has an extensive 20 years of
experience in the fastening business and is now
one of the leading suppliers and stockist of high
quality fasteners in Qatar and the Middle East.
Catering to the Oil and Gas Construction Industries
in Qatar, Edge Engineering stocks a wide range
of fasteners and other building materials such as
HSFG fasteners, bolts, nuts and washers, roofing
fasteners, machine screws and self taping screws
and self drilling screws. We have huge warehouse
facilities and two outlets in Qatar that meet the
needs of the regional market.
Edge Engineering marches in tandem with Qatar’s
economic progress and the region through
its diversification in to specialised Industrial
engineering fasteners specific to various sectors
such as Construction, Structural Steel Industry, Oil
and Petrochemical Industries as also Automotive
sector, Ship building, Electrical and switch gear.
Edge Engineering is one the leading wholesale
and retail traders for engineering fasteners in the
Gulf and has reputed manufacturers from Europe,
Far East and Asia on its supplier list.
Quality and customer service are our core
strengths. We ensure that our clients receive
feedback on enquiries for most products within
24 hours. This translates into quicker turn around
times and overall efficiency in the supply cycle.
3
-
06 Product List
08 Dealers
10 Industries
11 Structural Bolting
12 Hexagonal Bolts
14 Hexagonal Nuts
CONTENT
4
-
17 Circular Washers
19 Foundation Bolts
20 Threaded Rods
21 Other Bolts
23 Other Nuts
24 C-WELL Fastener Product
27 Foundation Bolts
5
-
Fasteners and bolting are crucial
components in any construction project.
While their costs maybe negligible to
the overall project costs, substandard
bolting can have severe consequences
in terms of project schedules and costs.
Our emphasis therefore is always on
quality, backed up by reliable inventory
and an efficient supply chain.
OUR PRODUCT LIST
• Black/Clear Zinc 8.8/10.9 DIN-933/DIN 931/DIN-934/
DIN 125.
• Hot Dip Galvanized Grade 8.8 & 10.9 DIN-931/934/DIN-
125A
ISO 4017/4014, 4032, 7089.
• Stainless Steel Grade 316L(A4-80), DIN-933/DIN-931/
DIN-934/DIN-125A/DIN-127
• UNC/UNF Threaded DIN-933/DIN-931/DIN-934/ in
Imperial / Inch Gr 10.9
• Hot Dip Galvanized ASTM A325 Type 1 Hex Bolts+A563
Heavy Hex Nuts+F436 F/Washer Assembly
• Squiters DTI’s (Direct Tension Indicator) Grade 8.8/10.9
from Applied Bolting USA
• Hex Nuts ASTM 194 2H/ A563 Class 10S/DIN-934
Class-10
STANDARDISED HIGH QUALITY PRODUCTS
6
-
• Hot Dip Galvanized Grade 8.8 Threaded Bars
(2Mtr Length)
• ASTM 193 B7 Black Threaded Bars in Metric sizes
(3.6 Mtr Length)
• ASTM A36Grade 4.6 Electro Galvanized Threaded
Bars (2Mtr Length)
• Shear Studs/Nelson Stud/Weld Stud
• Hot Dip Galvanized Straight Holding Down Anchor
Bolts Grade 8.8
• Hot Dip Galvanized L-Type Anchor Bolts Grade
A36
• Machine Screws / PAN head / Cheese Head
• Roofing Bolts (HDG 8.8/S.S A2Grade 304)
• Hot Dip Glavanized Tapper Washers
• Yellow Zinc Plated Contact Washers
• Hot Dip Galvanized Coupling Nuts/Long Nuts
• Hot Dip Galvanized Jam Nuts/Half Nuts
• Repair Washers Large OD (Gal.Zinc Plated,
HDG & SS 316[304])
• Grating Clamps with Pan Head Screw (HDG)
• Pal Lock Nuts (HDG, SS316 and G.I)
• Nylon Lock Nuts DIN985 Real Class-8
Clear Zinc
• Self Drilling Screws Hex Head, 1500hrs
Salt Spray Test (Bi-Metal/Carbon Steel /
Stainless Steel
• Hot Dip Galvanized Washers DIN-7989
• Aluminium Hill Side Washers
• Wire Ropes - Stainless Steel - Grade 316 /
Wire Ropes - Hot Dip Galvanized
• Spring Nuts (SS 316 & Glavanized) / Hot DIp
Galvanized
• U-Bolts Hot Dip Galvanized / SS U-bolts
• Socket Head Screws (DIN 912)
• CSK Hexagonal Socket Screws (DIN 7991)
• Carriage Bolts Hot Dip Galvanized Grade 8.8
• Self tapping screws (CSK and PAN head) /
Stainless Steel
• Brass Hex bolts, nuts and washers
7
-
WE ONLY DEAL WITH THE BESTWe believe in providing the highest quality and services. Hence, we have forged partnerships with the top suppliers in Europe and US.
Applied Bolting based in Vermont , U.S.A
are the manufacturers of Direct Tension
Indicator (DTI) washers, which are used to
get bolts installed to the correct tension
regardless of the bolts torque resistance.
Applied Bolting have an exclusive patent for
Squiters ®
DTI manufacture. Applied Bolting have
revolutionized DTI design by embedding
silicone in the depressions under the
indicator protrusions. Squirter® DTI’s
have been used on projects such as Dubai
International Airport, Dubai World Trade
Center (Jebel Ali), AGD II & OGD III.
8
-
Oread Fasteners based in Herford, Germany
are manufacturers of a wide variety of quality
construction, automobile and Industrial fasteners.
Acknowledged as an assured brand name for
quality and consistency, Oread are among a
select group of manufacturers to offer CE marked
products complying with stringent European
standards. Their quality certifications include:
• ISO 9001 : 2008
• CENTER EUROPE CERTIFICATION SERVICE
(CE CERTIFICATION)
• VOV CERTIFICATION & TESTING
LABORATORY
Using modern technology and a stringent
quality control regimen, Oread have established
themselves in providing innovative fastening
solutions to suit various requirements.
Established in year 1983, organized in
Herford Germany. The company design and
manufactures customised bolting solution to
the European automobile and construction
industries
To date, with cold forging and hot forging
facilities, we are able to cater fo the
manufacturing of bolts, nuts and washes from
diameter 4mm to diameter 64mm, Deliver up
to 2200 metric tons per month o components
to our customers world wide
Oread purchases its raw material from mills
of reputable sources. Each test certificate
clearly state the material chemical composite,
heat number, tested mechanical properties
and dimensional measurements. The full
traceability of our system ensure that only the
quality products are deliver to yours doorstep.
9
-
Oil & Gas
Ship Building Transformers Infrastructure
Construction Telecom Rail
10
-
TRUSTEDAND USED
BY EXPERTS
Our products are used in a wide range of
industries and for many specialised projects.
We are preferred supplier for various
sectors like Structural Steel Construction,
Pre-engineered Steel Buildings, Electrical
& Switch gear, Telecom tower construction
and Oil, Rail, Infrastructure & Petrochemical
industries. We are a leading player in the
distribution and supply of quality fastening
solutions with many satisfied clients across
many sectors in the Gulf region
11
-
BS EN Structural Bolting with CE MarkingBS EN14399-4 System HV Preloaded Bolting
10.9 HV
Hexagonal Head, Partial Threaded Preloaded Structural Bolting Assembly
Size Range Available Material Available Grade Standards Coatings
M12 - M36 Carbon Steel 10.9 BS EN14399 Part 1, 2 & 4As Processed Hot-Dip Galvanized As Agreed
BS EN14399-3 System HV Preloaded Bolting
8.8 HR
Hexagonal Head, Partial Threaded Preloaded Structural Bolting Assembly
Size Range Available Material Available Grade Standards Coatings
M12 - M36 Carbon Steel 8.8, 10.9 BS EN14399 Part 1, 2 & 3As Processed Hot-Dip Galvanized As Agreed
BS EN15048 Non-Preloaded Structural Bolting
8.8 SB
Hexagonal Head, Full / Partial Threaded Non-Preloaded Structural Bolting Assembly
Size Range Available Material Available Grade Standards Coatings
M6 - M64Carbon SteelStainless Steel
Stainless Steel 4.6, 4.8, 5.6,5.8, 6.8, 8.8, 10.9 50, 70(Other Grades See ISO3056-1)
BS EN15048 Part 1 & 2
As Processed Electroplated Hot-Dip Galvanized As Agreed
12
-
Hexagonal BoltsBS EN14399-4 (DIN6914)
Hexagonal Head, Partial Threaded Preloaded Structural Bolting
Size Range Available Material Available Grade
M12 - M36 Carbon Steel 10.9
Standards Coatings
BS EN14399 Part 4 As Processed Hot-Dip Galvanized As Agreed
10.9 HV
BS EN14399-3
DIN EN ISO4016 (DIN601)
DIN EN ISO4017 (DIN933)
8.8HR
Hexagonal Head, Partial Threaded Preloaded Structural Bolting
Size Range Available Material Available Grade
M12 - M36 Carbon Steel 8.8, 10.9
Standards Coatings
BS EN14399 Part 3 As Processed Hot-Dip Galvanized As Agreed
Hexagonal Head, Partial Threaded Structural Bolt
Size Range Available Material Available Grade
M6 - M64 Carbon Steel 3.6, 4.6, 4.8 (Other Grades See ISO898-1)
Standards Coatings
DIN EN ISO 4014 Electroplated As Agreed
Hexagonal Head, Full Threaded Structural Bolt
Size Range Available Material Available Grade
M6 - M64Carbon SteelStainless Steel
4.6, 4.8, 5.6, 5.8, 6.8, 8.8, 10.9 50, 70 (Other Grades See ISO3056-1)
Standards Coatings
DIN EN ISO 4017As Processed Electroplated Hot-Dip Galvanized As Agreed
Hexagonal Head, Partial Threaded Structural Bolt
Size Range Available Material Available Grade
M6 - M64Carbon Steel Stainless Steel
4.6, 4.8, 5.6, 5.8, 6.8, 8.8, 10.950, 70 (Other Grades See ISO3056-1)
Standards Coatings
DIN EN ISO 4014As Processed Electroplated Hot-Dip Galvanized As Agreed
DIN EN ISO4014 (DIN931)
DIN EN ISO4018 (DIN558)
Hexagonal Head, Partial Threaded Structural Bolt
Size Range Available Material Available Grade
M6 - M64 Carbon Steel 3.6, 4.6, 4.8 (Other Grades See ISO898-1)
Standards Coatings
DIN EN ISO 4018 Electroplated As Agreed
13
-
ASTM A490M
Heavy Hexagonal Head, Partial Threaded Structural Bolt
Size Range Available Material Available Grade
M12 - M36 Carbon Steel 1,040MPa - 1,210MPa
Standards Coatings
ASTM A490M As Processed
ASTM A307M
Hexagonal Head, Full / Partial Threaded Structural Bolt
Size Range Available Material Available Grade
M6 - M64 Carbon Steel 4.6, 4.8, 5.8
Standards Coatings
ASTM A307 (F568M)As Processed Electroplated Hot-Dip Galvanized As Agreed
ASTM A490
Heavy Hexagonal Head, Partial Threaded Structural Bolt
Size Range Available Material Available Grade
1” - 1½” Carbon Steel 150ksi - 173ksi
Standards Coatings
ASTM A490M As Processed
ASTM A325M
Heavy Hexagonal Head, Full / Partial Threaded Structural Bolt
Size Range Available Material Available Grade
M12 - M36 Carbon Steel 830MPa
Standards Coatings
ASTM A325M As Processed Hot-Dip Galvanized
ASTM A325
Heavy Hexagonal Head, Full / Partial Threaded Structural Bolt
Size Range Available Material Available Grade
1” - 1½” Carbon Steel 120ksi (½” To 1” Incl) / 105ksi (1 1/8” To 1½”)
Standards Coatings
ASTM A325MAs Processed Hot-Dip Galvanized
ASTM A307
Hexagonal Head, Full / Partial Threaded Structural Bolt
Size Range Available Material Available Grade
¼" - 2½" Carbon Steel A, B, C
Standards Coatings
ASTM A307As Processed Electroplated Hot-Dip Galvanized As Agreed
SAE J429
Hexagonal Head, Full / Partial Threaded Structural Bolt
Size Range Available Material Available Grade
¼" - 1½" Carbon Steel 2, 5, 8
Standards Coatings
SAE J429As Processed Electroplated Hot-Dip Galvanized As Agreed
A490M
A490
A325M
A325
A307M
A307
14
-
Hexagonal Head Preloaded Nut
Size Range Available Material Available Grade
M12 - M36 Carbon Steel 10
Standards Coatings
BS EN14399 Part 4 As Processed Hot-Dip Galvanized As Agreed
Hexagonal Head Preloaded Nut
Size Range Available Material Available Grade
M12 - M36 Carbon Steel 8, 10
Standards Coatings
BS EN14399 Part 3 As Processed Hot-Dip Galvanized As Agreed
Hexagonal Head Nut
Size Range Available Material Available Grade
M6 - M64 Carbon Steel, Stainless Steel 6, 8, 10 50, 70 (Other Grades See ISO3056-2)
Standards Coatings
DIN EN ISO 4032As Processed Electroplated Hot-Dip Galvanized As Agreed
Hexagonal Head Nut
Size Range Available Material Available Grade
M6 - M64 Carbon Steel, Stainless Steel9, 12 (Other Grades See ISO898-2)50, 70 (Other Grades See ISO3056-2)
Standards Coatings
DIN EN ISO 4033As Processed Electroplated Hot-Dip Galvanized As Agreed
BS EN14399-3
DIN EN ISO4032 (DIN934, Style 1)
DIN EN ISO4032 (DIN934, Style 2)
Hexagonal NutsBS EN14399-4 (DIN6915)
10.9
8
HV
HR
Hexagonal Head Nut
Size Range Available Material Available Grade
M6 - M64 Carbon Steel 4, 5 (Other Grades See ISO898-1)
Standards Coatings
DIN EN ISO 4034As Processed Electroplated Hot-Dip Galvanized As Agreed
DIN EN ISO4034 (DIN555)
Hexagonal Head Thin Nut (Chamfered)
Size Range Available Material Available Grade
M6 - M64 Carbon Steel, Stainless Steel 4, 5 25, 35
Standards Coatings
DIN EN ISO 4035As Agreed As Processed Electroplated Hot-Dip Galvanized As Agreed
DIN EN ISO4035 (DIN439, Part 2)
15
-
Hexagonal Head Thin Nut (Chamfered)
Size Range Available Material Available Grade
M6 - M64 Carbon Steel 110HV30
Standards Coatings
DIN EN ISO 4036 As Processed Electroplated As Agreed
Heavy Hexagonal Head / Hexagonal Head Nut
Size Range Available Material Available Grade
M6 - M64 Carbon Steel 5, 9, 10, 12, 8S, 10S
Standards Coatings
ASTM A563M As Processed Hot-Dip Galvanized As Agreed
DIN EN ISO4036 (DIN439, Part 1)
ASTM A563M
Heavy Hexagonal Head / Hexagonal Head Nut
Size Range Available Material Available Grade
¼” - 2½” Carbon Steel O, A, B, C, D, DH, DH3
Standards Coatings
ASTM A563 As Processed Hot-Dip Galvanized As Agreed
ASTM A563
Heavy Hexagonal Head / Hexagonal Head Nut
Size Range Available Material Available Grade
M6 - M64 Carbon Steel Stainless Steel1, 2, 2HM, 3, 4, 6, 6F, 7, 7M, 16
8,8A, 8C, 8F, 8P, 8N, 8LN, 8MN, 8MLN, 8R, 8S, 8MLCuN, 9C
Standards Coatings
ASTM A194MAs Processed Electroplated Hot-Dip Galvanized As Agreedd
Heavy Hexagonal Head / Hexagonal Head Nut
Size Range Available Material Available Grade
¼” - 2½” Carbon Steel Stainless Steel1, 2, 2HM, 3, 4, 6, 6F, 7, 7M, 16
8,8A, 8C, 8F, 8P, 8N, 8LN, 8MN, 8MLN, 8R, 8S, 8MLCuN, 9C
Standards Coatings
ASTM A194As Processed Electroplated Hot-Dip Galvanized As Agreed
Hexagonal Head Nut
Size Range Available Material Available Grade
¼” - 1½” Carbon Steel 2, 5, 8
Standards Coatings
SAE J995As Processed Electroplated Hot-Dip Galvanized As Agreed
ASTM A194M
ASTM A194
SAE J995
16
-
Circular Plain Hardened Chamfered Washer
Size Range Available Material Available Grade
M12 - M36 Carbon Steel 300HV To 370HV
Standards Coatings
BS EN14399 Part 6As Processed Hot-Dip Galvanized As Agreed
Circular Plain Hardened Washer
Size Range Available Material Available Grade
M12 - M36 Carbon Steel 300HV To 370HV
Standards Coatings
BS EN14399 Part 5As Processed Hot-Dip Galvanized As Agreed
Circular Plain Hardened Washer
Size Range Available Material Available Grade
M6 - M64Carbon Steel Stainless Steel
100HV To 300HV, 100HV To 370HV 100HV To 300HV
Standards Coatings
DIN EN ISO 7089As Processed Electroplated Hot-Dip Galvanized As Agreed
Circular Plain Chamfered Washer
Size Range Available Material Available Grade
M6 - M64Carbon Steel Stainless Steel
100HV To 300HV, 100HV To 370HV100HV To 300HV
Standards Coatings
DIN EN ISO 7090As Processed Electroplated Hot-Dip Galvanized As Agreed
BS EN14399-5
DIN EN ISO7089 (DIN125, Part A)
DIN EN ISO7090 (DIN125, Part B)
Circular WashersBS EN14399-6 (DIN6916)
H
H
17
-
Circular Plain Chamfered Washer
Size Range Available Material Available Grade
M6 - M64 Carbon Steel 110HV To 200HV
Standards Coatings
DIN EN ISO 7091As Processed Electroplated Hot-Dip Galvanized As Agreed
DIN EN ISO7091 (DIN125, Unhardened)
Circular Plain Hardened Washer
Size Range Available Material Available Grade
M12 - M64 Carbon Steel 26 To 45HRC
Standards Coatings
STM F436MAs Processed Hot-Dip Galvanized As Agreed
Circular Plain Hardened Washer
Size Range Available Material Available Grade
¼” - 2½” Carbon Steel 26 To 45HRC
Standards Coatings
ASTM F436As Processed Hot-Dip Galvanized As Agreed
Circular Spring Washer
Size Range Available Material Available Grade
M6 - M64 Carbon Steel 430HV To 530HV
Standards Coatings
DIN 127As Processed Electroplated As Agreed
ASTM F436M
ASTM F436
DIN 127
F436M
F436
18
-
Foundation BoltsStraight Holding Down Foundation Bolt
Straight Holding Down Bolt
Size Range Available Material Available Grade
M12 - M64 Carbon Steel A35, A55, A105, 4.8, 6.8, 8.8
Standards Coatings
ASTM F1554 As Processed Hot-Dip Galvanized As Agreed & Black
Straight Holding Down Bolt
Size Range Available Material Available Grade
M12 - M64Carbon Steel Stainless Steel
A35, A55, A105, 4.8, 6.8, 8.8, 10.9 8,8A, 8C, 8F, 8P, 8N, 8LN, 8MN, 8MLN,8R, 8S,8MLCuN, 9C
Standards Coatings
ASTM F1554As Processed Hot-Dip Galvanized wAs Agreed
Straight Holding Down Bolt
Size Range Available Material Available Grade
M12 - M64 Carbon Steel A35, A55, A105, 4.8, 6.8, 8.8, 10.9
Standards Coatings
ASTM F1554As Processed Electroplated Hot-Dip Galvanized As Agreed
L-Shape Anchor Foundation Bolt
J-Shape Anchor Foundation Bolt
19
-
Threaded RodsDIN975
Full Threaded Rod
Size Range Available Material Available Grade
M6 - M64Carbon SteelStainless Steel
4.6, 4.8, 8.8, 10.9, 12.950, 70 (Other Grades See ISO3056-1)
Standards Coatings
DIN 975 As Processed Electroplated Hot-Dip Galvanized As Agreed
Full Threaded Stud
Size Range Available Material Available Grade
¼” - 2½” Carbon Steel 4.6, 4.8, 5.8
Standards Coatings
ASTM A307 As Processed Hot-Dip Galvanized As Agreed
Full Threaded Stud
Size Range Available Material Available Grade
M6 - M64Carbon SteelStainless Steel
B5, B6, B7, B7M (Other Grade See A193M)B8, B8A, B8M (Other Grade See A193M)
Standards Coatings
ASTM A193M As Processed Electroplated Hot-Dip Galvanized As Agreed
Full Threaded Stud
Size Range Available Material Available Grade
¼” - 2½”Carbon SteelStainless Steel
B5, B6, B7, B7M (Other Grade See A193)B8, B8A, B8M (Other Grade See A193)
Standards Coatings
ASTM A193 As Processed Electroplated Hot-Dip Galvanized As Agreed
Full Threaded Stud
Size Range Available Material Available Grade
M6 - M64 Carbon Steel 4.6, 4.8, 5.8
Standards Coatings
ASTM A307 (F568M) As Processed Electroplated Hot-Dip Galvanized As Agreed
ASTM A307M
ASTM A307
ASTM A193M
ASTM A193
20
-
Other BoltsDIN571
DIN580
DIN603
DIN604
DIN605
Hexagon Head Wood Screw
Size Range Available Material Available Grade
M6 - M20Carbon SteelStainless Steel
4.6, 8.8Grade At Oread’s Discretion As Agreed
Standards Coatings
DIN571Electroplated Hot-Dip Galvanized
Collar Eyebolt
Size Range Available Material Available Grade
M8 - M64Carbon SteelStainless Steel
C15E Steel50, 70 (Other Grades See ISO3506-1)
Standards Coatings
DIN580Electroplated Hot-Dip Galvanized As Agreed
Mushroom Head Square Neck Bolt
Size Range Available Material Available Grade
M6 - M20 Carbon SteelC15E Steel50, 70 (Other Grades See ISO3506-1)
Standards Coatings
DIN580Electroplated Hot-Dip Galvanized As Agreed
Mushroom Head Square Neck Bolt
Size Range Available Material Available Grade
M6 - M24 Carbon Steel 4.6
Standards Coatings
DIN604Electroplated Hot-Dip Galvanized As Agreed
Flat Countersunk Square Neck Bolt
Size Range Available Material Available Grade
M6 - M10 Carbon Steel 4.6
Standards Coatings
DIN605Electroplated Hot-Dip Galvanized As Agreed
4.6
4.6
21
-
DIN607
DIN608
DIN912
EN1665 (DIN6921)
DIN7990
ISO10642 (DIN7991)
Cup Head Nib Bolt
Size Range Available Material Available Grade
M8 - M16 Carbon Steel 4.6
Standards Coatings
DIN 607Electroplated Hot-Dip Galvanized As Agreed
Flat Countersunk Square Neck Bolt (With Short Square)
Size Range Available Material Available Grade
M10-M12 Carbon Steel 4.6
Standards Coatings
DIN 608Electroplated Hot-Dip Galvanized As Agreed
Hexagonal Socket Head Cap Screws
Size Range Available Material Available Grade
M6 - M64Carbon SteelStainless Steel
8.8, 10.9, 12.950, 70
Standards Coatings
DIN 912As Processed Electroplated As Agreed
Hexagonal Flange Bolt
Size Range Available Material Available Grade
M6-M20Carbon SteelStainless Steel
4.6, 5.670
Standards Coatings
EN 1665Electroplated Hot-Dip Galvanized As Agreed
Hexagonal Head Bolt For Structural Steel Bolting For Supply With Nut
Size Range Available Material Available Grade
M12-M30 Carbon Steel 4.6, 5.6
Standards Coatings
DIN 7990Electroplated Hot-Dip Galvanized
Hexagonal Socket Countersunk Head Cap Screw
Size Range Available Material Available Grade
M6 - M24Carbon SteelStainless Steel, A2
8.850,70
Standards Coatings
ISO10642Electroplated Hot-Dip Galvanized
4.6
4.6
5.6
22
-
EN1661 (DIN6923)
EN1661 (DIN6923)
Other NutsDIN582
Lifting Eye Nut
Size Range Available Material Available Grade
M8 - M64 Carbon Steel C15E Steel
Standards Coatings
DIN580 Electroplated or Hot-Dip Galvanized As Agreed
Hexagon Nut Flange
Size Range Available Material Available Grade
M6 - M20Carbon Steel Stainless Steel, A2
8, 10, 1270
Standards Coatings
EN1661 Electroplated or Hot-Dip Galvanized As Agreed
Hexagon Nut Flange
Size Range Available Material Available Grade
M6 - M20Carbon Steel Stainless Steel, A2
8, 10, 1270
Standards Coatings
EN1661 Electroplated or Hot-Dip Galvanized As Agreed
23
-
ASTM F1554
ASTM F1554
Foundation Anchor L- Bolts
Foundation Straight Holding g Down Bolts
ASTMF1554 Foundation Anchor Bolt Dimensions
ASTMF1554 Foundation Straight Holding g Down Bolts
Description M16 M20 M20 M24 M30 M36
Max. Min.a) Max. Min.a) Max. Min.a) Max. Min.a) Max. Min.a) Max. Min.a)
Bolt Diameter D 16.00 15.50 20.00 19.45 20.00 19.45 24.00 23.40 30.00 29.32 36.00 35.30
Vertical Length L 475 450 600 625 850 1150
Horizontal Length X 120 175 175 205 265 295
Thread Length Lt Horizontal Length
200 200 250 250 300 300
Radius R1 40 50 50 60 75 90
Radius R2 56 70 70 84 105 126
Un bended Length 595 625 775 830 1,115 1,445
a) Minimum body dimension are calculated base on ASTM F1554 Table 5 cut threads
Bolt Diameter x Pitch d M16 x 2 M20 x 2.5 M24 x 3 M27 x 3 M30 x 3.5 M36 x 4
Length L 120 175 175 205 265 295
Thread Length Lt 200 200 250 250 300 300
Other sizes and non-standard design as per BUYER design are available upon request. Kindly contact Oread and /
or our authorized distributor for more details.
Other sizes and non-standard design as per BUYER design are available upon request. Kindly contact Oread and /
or our authorized distributor for more details.
24
-
Bi metal Self Drilling Range
Code Grade Material Composition (%)
C Si Mn P S Ni Cr Mo
SUGSBM
AISI 304EN1.4301
Max0.08
Max1.0
Max2.0
Max0.045
Max0.03
8.00~10.5
18.00~20.00
~
SUFSHM
AISI 316EN1.4401
Max0.08
Max1.0
Max2.0
Max0.045
Max0.08
10.00~14.00
16.00~18.00
2.00~3.00
Heat Treated Carbon Steel Drill Point Provide excellent drilling performanceduring installation.
300 Series Authentic Stainless Steel Head and ShankProvide excellent corrosion resistance to match thelifespan of metal roofing/ cladding profile.
Combining the best of both metals to give you a trouble free installation process and protect the value of
your building investment.
The proprietary process developed by our Connection Technology fuse the high-carbon steel drill
tip with the authentic fastener head and body. Our Bi metal fastener features the inherent corrosion
resistance of the authentic stainless steel and the strength of carbon steel that give it the ability to drill
up to 12.5mm on steel.
The unique heat treatment process utilises the latest technology, isolating the stainless steel from heat
source, thus maintaining the integrity of the stainless steel material. To combat the widest variety of
corrosion scenarios involving dissimilar metals such as aluminium, each of our Bi metal fastener has
PPIVTM coating to act as galvanic barrier.
Benefits Outstanding corrosion resistance and long service life
High strength, ductility and reliability
Greater compatibility with Aluminium material compare to carbon steel fasteners
Drill up to 12.5mm on steel
Authentic Stainless Steel Grade Available
316 BIMETAL 304 BIMETAL
25
-
Stainless Steel Self Drilling Range
Thread Design – TYPE AB
Article number Sizes Drive System
1347-016-46-11 SUG HWH #14x25mm DN 10mm Hex
1347-040-46-11 SUG HWH #14x40mm DN 10mm Hex
1347-050-46-11 SUG HWH #14x50mm DN 10mm Hex
1347-065-46-11 SUG HWH #14x65mm DN 10mm Hex
1347-075-46-11 SUG HWH #14x75mm DN 10mm Hex
1347-090-46-11 SUG HWH #14x90mm DN 10mm Hex
1347-100-46-11 SUG HWH #14x100mm DN 10mm Hex
1347-115-46-11 SUG HWH #14x115mm DN 10mm Hex
1347-120-46-11 SUG HWH #14x120mm DN 10mm Hex
1347-130-46-11 SUG HWH #14x130mm DN 10mm Hex
Screw Size Pierced or extruded hole diameter
Drilled or Clean-punched holes
#10 3.82 3.85t
#12 4.07 4.30
#14 4.95 5.20
SS304 Hex Washer Head, Self-Tapping Fastener with OD16mm
Stainless Steel 304 Bonded EPDM Washer.
316 Stainless Steel
304 Bimetal
Carbon Steel
It is important that the correct-hole size is used and the
recommendation below should be followed.
For fastening into very hard material a hole size slightly larger may
have to be used.
For very soft material a smaller hole may be necessary.
Full Stainless Steel Self-Tapping FastenerStainless Steel Grade Available
26
-
EDGE ENGINEERING SHOWROOMBarwa Village, Wakra
Doha - Qatar
EDGE ENGINEERING SHOWROOMIndustrial Area
Doha - Qatar
EDGE ENGINEERING WAREHOUSEGate 74, Street 28
Doha - Qatar
www.edge-engineering.net
27
-
P.O Box : 55752 Doha Qatar, Tel : +974 4468 6317 / +974 4468 3968
Fax : +974 4468 3594, Email : [email protected]
www.edge-engineering.net