PNEUMATIC TOOLS ACCESSORIES - dentmasters india€¦ · PNEUMATIC TOOLS & ACCESSORIES. 3/8” AIR...
-
Upload
nguyenliem -
Category
Documents
-
view
225 -
download
2
Transcript of PNEUMATIC TOOLS ACCESSORIES - dentmasters india€¦ · PNEUMATIC TOOLS & ACCESSORIES. 3/8” AIR...
3/8” AIR DRILL
Features:Full Cage Gear Design
• Free Speed (RPM) 2,600• Chuck Size 3.8”• Air Inlet (NPT) 1/4”• Hose Size ID Inch (mm) 3/8 (10)• Average Air Consumption 4 (113)• Spindle Thread 3.8” - 24• Length Inch (mm) 7 - 7/8 (200)• Weight Lbs (Kg) 2.6 (1.2)
Specifications:
AIR SPOT DRILL KIT WITH LEVER
3-Edge Cutter Tungsten Carbide
#71-7801066.3 X 47 mm
#71-7801088.3 X 47 mm
#71-780110010.3 X 47 mm
Step 1Adjust the Steady frame position and point drill bit at the metal
Step 3Push the throttle lever to start and use booster level to move the drill bit forward.
Step 2Push the booster level to have drill bit touch the metal plate easilly
AIR SPOT DRILL KIT
Features• 2 Speed• Adjustable depth stop which allows you to drill out just the spot weld and
not the panel beneath• Drills out the entire spot weld, eliminating the need for grinding• New low RPM tool prolongs the life of spot weld bits• Special Boron bits available for high strength steel
• • • • • • • •
Drill Bit Size Chuck Capacity: 5/16”Free Speed: 500 - 600 rpmOverall Length: 8-3/4” (222mm)Net Weight: 3 lbs. (1.4 kg)Air Inlet Thread NPT: 1/4”Air Hose I.D. Size: 3/8” (10mm)Avg. Air Consumption: 4 cfmAir Pressure: 90 - 120 psi
Specifications:
Approved and Recommended by
COMPOSITE IMPACT WRENCH
SUPER DUTY IMPACT WRENCH
Features:•• Durable twin hammer impact mechanism• Anvil and rotor made of a special heat treated alloyed steel
which prevent chipping or breaking• Steel hammer case provides maximum protection• Two piece construction for easy maintenance• Pressure feed lubrication system
Ideal for automotive work, body shop and tire shop
Features:• Highest power to weight rate delivers 1100ft-lbs Nut Busting torque• Short body for easy getting into tight working area• Refined twin hammer impact mechanism plus bias motor design
providing max. torque output in reverse• Feather touch trigger provides extremely precise & smooth speed control• One-hand operated forward / reverse• Patented forward / reverse switch that shifts left hand operation to right
hand operation within seconds• 3 - position power setting regulator in forward and always full in reverse
Features:• High performance motor delivers higher torque than standard ratchets• Self-lubricated rotor blades
0 • 360 adjustable exhaust directs air away from work surface• Ergonomic handle• Short, robust crankshaft transfers power with low vibration• Reinforced throttle lever• Internal ring gear with three planetary gears provides maximum service life
SUPER DUTY RATCHET WRENCH
3-IN-1 RANDOM ORBITAL PALM SANDER
Specifications:
AIR SAW KIT
Features• Heavy duty industrial air saw eliminates drag and power through
the toughest of surfaces• Saw comes complete with newly designed guide that prevents Waffleing” while used for both sanding and cutting
Specifications:• Free Speed: 5000 rpm• Strokes Length: 2/5” (10mm)• Capacity Cutting Size: 1.6mm Steel• Air Inlet: 1/4”• Air Pressure: 6.2bar• Air Consumption: 4cfm• Weight: 1-3/4” (0.8kg)• Overall Length: 9-5/6” (250mm)
• Pad Size: 6 in (152 mm) or 5 in (127 mm)• Free Speed: 12,000 rpm• Overall Length: 8-3/8 in (213 mm)• Net Weight: 1.45 lbs (0.65 Kgs)• Spindle Thread: 5/16” - 24 UNF• Air Inlet Thread NPT: 1/4”
Features•••
••••••• M
High PoweredLow vibrationSuper lightweight (1.45lbs./ 0.70kg) and compact forminimum operator fatigue3 in 1 design for Central Vacuum, Self Vacuum and Non VacuumOrbital action assures final swirl-free finishBuilt-in speed regulatorCompact and lightweight motor for long term operationEasy Operative Switch-Valve DesignComposite lever housing and rotors
ufting design reduces sound level
•• Avg. Air Consumption: 3 9cfm) / 85 (1/min)• Air Pressure: 90 psi (6.3 bar)• Sound Pressure: 80 dba• Sound Power: 76 dba
Air Hose I.D. Size: 3/8” in (10 mm)
AIR SURFACE PREP KIT
• Ideal for removal of paints, rust, gasket materials, surface deposits and grinding welds.• Built in dust free regulator with speeds offers an easy one hand operation.• Durable composite housing for light weight, comfortable and chemical resistance.• Pistol grip design for excellent balance.• Variable speed trigger for maximum control.
Features :
Specifications:• Pad Size: 2” and 3”• Free Speed: 16000 RPM• Spindle Thread: 1/4”• Air Inlet: 1/4” NPT• Air Pressure: 90 PSI• Net Weight: 0.6 Kgs
HEAVY DUTY 2” ANGLE GRINDER
BELT SANDER KIT
HEAVY DUTY LONG HAMMER KIT
Features:• Rubber sleeve handle reduce vibration• Rib textured handle provides a firm grip• Safety throttle lever• Compact and light weight• Side exhaust offer the best motor efficiency• Guard included• Heavy duty alloy air motor• 2 grinding wheels (60 & 80 grit) included
• Pad Size : 2”• Free Speed : 22,000rpm• Overall Length : 5-1/2” (1400mm)• Tool Weight : 1.17bs. (0.53kg)• Spindle Thread Size : 3/8” x 24• Air Inel Thread NPT : 1/4”• Air House I.D. Size : 3/8” (10mm)• Avg. Air Consumption : 3cfm• Air Pressure : 90-120psi
Specifications :
• 1 pc SG-2715R Heavy Duty Long Hammer• 5 pc Chisel 7”• 1 pc Oiler (Optional)• 1 pc Blow Case
Features :
Specifications:• • Stroke length Inch (mm) 2-5/8(67)• Shak Opening Inch (mm) 0.401 (10.2)• Air Inlet (NPT) 1/4”• Hose Size ID Inch (mm) 3/8(10)• Air Consumption CFM (L/Min) 4(113)• Overall Length Inch (mm) 6-3/4(171)• Weight Lbs (Kg) 3.5(1.6)
Bore Size 3/4”
Specifications:• • Belt Size Inch (mm) 1/4 & ½ (6 & 13)• Air Inlet NPT (Inch) 1/4”• Hose Size ID Inch (mm) 3/8 (10)• Air Consumption CFM/SCFM (l/Min) 4.2 / 30 (850)• Length Inch (mm) 12 - 3/8 (314)• Weight Lbs (Kg) 2.2 (1.0)• Noise Level dB (A) 84
Free Speed (RPM) 20,000
• 4 Interchangeable Contact Arms• Use Both Normal Abrasive Belt and Surface• Prep Belt• Dead Handle for Easy Operation• Comfort Grip• Silencer For Lower Noise• Swivel Air Inlet
Features :
AIR BLOW GUN
4 Inch 10 Inch 16 Inch
AIR CAULKING GUN
• Made of lightweight durable composite plastic• Ergonomically designed handle provides extra comfort and better grip • Angled nozzle easily gets into tight places• Maximum Pressure : 230psi/16KGS• Average Air Consumption is 8 cfm
Features :
I.D. Size (Tube): 2" Tube Length: 8-1/4" Air Pressure: 40-90psi Net Weight: 2.8lbs.
? Permits smooth flow caulking ? Dispenses caulking, adhesives and sealants from standard cartridge
Features :
Specifications:
AIR RIVETERS
Blind Rivet Setting Capacity 3/16”Traction Power (Lbs) 1,940Stroke Length (Inch) 9/16Air Inlet (NPT) 1/4”Hose Size ID Inch (mm) 3/8 (10)Length Inch (mm) 1-1/2(292)Weight LBs (Kg) 404(1.9)
Specifications
11 PIECE FASTENER AND MOULDING REMOVAL SET
DMC 660 5 inch high speed sander with regulator
1.RPM 140002.Pad size 3 inch,4.5 and 5.5 inch3.weight 0.9 kg
Set Includes:1) V double step door panel tool2) U door panel tool3) U mini trim panel tool4) V mini trim panel tool5) Reverse door panel tool
DMC 4525
TRIM REMOVAL KIT SINGLE ACTION SANDER
DMC 4524
PAINT SAMPLE CARD DRYERS
PD-301
Set Includes:1) 6" Remover - Wide Type2) 7" Remover - Pull Type3) 8" Remover - Handy Type4) 7" Remover - Narrow Type5) 8.5" Upholstery Clip Remover6) 8" Angled Clip Panel Remover7) 8" Flat Clip Panel Remover8) 8" Panel Remover9) 8" Sharp Panel Remover10) 8" Clip Panel Remover11) 8" Straight Panel RemoverŸ For use on internal and external vehicle
moulding and trip fasteners.Ÿ Plastic construction of tools prevents
scratching and damage to vehicle paint, leather, chrome, etc.
Features :
Ÿ 240 Volt InfraredŸ Wall MountedŸ 100 Spray Out CardsŸ Spray Out Card HolderŸ Air & Infrared for dryingŸ WaterborneŸ TimerŸ Variable Temperature Control
Features :
Features :
Features :
Approved and Recommended by
PNEUMATIC HOLE PUNCH
TACK PUNCH
Features :• Punch designed for easy replacement.• Performs hole punching and panel crimping • Features a rotating head for convenient use• Every pull of the lever delivers a single punch or a single flange crimp
with precision control• Forms an offset crimped edge on sheet metals for no-bump lap welds• Lightweight• Durable construction• Reduces metal fabrication time in half
OIL FILTER WRENCH
Can be used for a variety of filter housing applications• All sockets are 3/8" drive• Made of Chrome Vanadium
Features :
Features :• The ideal tool for making 5mm / 6mm diameter holes which are perfect for plug welding and easy riveting
Approved and Recommended by
PNEUMATIC FOAM GUN
Features :• Easy Operation : Just connect with comressed air, put the suction pad on dent area and then use slide hammer to pull up the dent; suitable for minor paint-less dent repairs.• The suction pad keeps firm hold of panel while slide hammer is used to ease out the dents without damaging the paint surface. • Includes 2 X Suction pads ( 120 & 150 mm) and 1 X 13” Inlet Hose• Option : 60mm Suction pad• weight of slide Hammer : 1.36 kgs (3 lbs)• with Brass Shut Off Valve and 1/4” Air Plug• Air Exhaust : Handle
89000 AIR DENT PULLER
SUCTION CUP SET WITH STRAP
• 4 - 5/8 diameter rubber suction cup• High impact plastic construction• Suction cup for secure grip• For one person auto glass repair• Capacity 154 lb.
The Strapping machine helps secure glass at the right place and does not allow the glass to slip away from the pinchweld.
With suction cups secured to the glass, strapping machine gives equal pressure on all Four Sides.
Fixes It right......the First Time !!!!!!
Features :
The first impulse foam gun, which prepares the cleaning fluid into a solid and upright foam.
Less cleaning fluid ... less water consumptionLess waste water ... environmental friendly.
Especially designed for all kinds of intensive preliminary purifications, which requires longer residence time on the objects.
Features :
7PC. BODY & FENDER SET - HAMMERS WITH HICKORY HANDLE
Features:• Polished, drop-forged steel dollies• Hammers hickory handle• FSC (Forest Stewardship Council) Certified Set Includes: - Shrinking Peen Hammer - Pick Peen Hammer - Straight Peen Hammer - Universal Dolly - Heel Dolly - Curved Dolly - Mushroom Dolly - Blow molded storage case
DELUXE SOLAR AUTO DARKENING WELDING HELMET AND13.5” LEATHER WELDING GLOVES
• Automatically charges filter screen from clean to dark in 1/25,000 second• Variable shade adjustment - 9-13 DIN• UV/IR Protection : Up to DIN 16 At All Times• Great for use with MIG/MAG,TIG & ARC Welding• Operator can adjust the time the filter returns from dark to clear• Full face and front of neck protection• Observation Window: 98mm X 44mm• Goggle Assembly: 110mm X 90mm• Automatic Power On/Off (no button to push) • Utilizes high performance solar cells as power supply• No change of battery is needed• Under normal welging conditions, users can expect a battery life of more than 6 years• Specially designed headband for greater comfort• Meets EN, DIN, ISO & ANSI Z87. I standards
#8085 - 13.5” Leather Welding Gloves
Features:
JUMPER CABLE SET WITH STAINLESS STEEL CLAMPS
Length of Cable : 2.5 metresCable Section in mm : 16Amperes : 120
Features:
SUPER STAND- UNIVERSAL ROTATING PARTS WORK STAND
Features:• Accommodates any panel, fender, door, hood, or bumper which makes repairs
and refinishing easy• Includes 8 adjustable bars to fit almost any panel securely• Portability allows for fast and easy moving of the part from the prep station
to the spray booth• Single handed rotation of panels 350 degrees in 16 degree increments• Weight capacity : 200 lbs• Weight : 52 lbs
WATERBORNE COLOUR DRYING VENTURI
PUMP LESS SPRAY GUN WASHER
PAINT GUN CLEANING KIT AND STAND
• Pump-less- No pump to replace• 10 Litre solvent tank• Takes less than a minute to clean• One gun and one cup capacity• Used solvent easily disposed via drain valve• Enclosed container operations minimises• Painters exposure to solvents• Auto Stop timer• Safety valve• Auto shut off lid switch• Low air consumption• Suitable for water based paints
Features:
Air blow venturi for curing of water based paints
Combination curing of water and solvent paints with Dent Masters infra red drier
Features:
Cleans fluid tip, air cap, air passage and exterior of the spray gun Kit Includes: 6 - Precision Needle Set 1 - Handle for Precision Needle 1 -
Handle for Detail Brush 3 - Detail End Brush Set (1/4", 3/8" & 1/2") 1 - 12"
Pick-up Tube Brush 5 - Precision Mini Twisted Brush 1 - Nylon Bristle Parts
Brush 1 - Brass Power Pick-up Tube Brush 1 - 1/4" HVLP Brush 1 - 1/2" Body
Cavity Brush
2pc. gravity feed gun holder works great with all gravity feed guns
? Top strainer holder may be removed for additional clearance ?
Strainer holder swivels away from cup
Features:
Specifications
Approved and Recommended by
3.5" DIGITAL TIRE INFLATOR WITH HOSE
• Easy Change Chuck System• 1 Button Operation• Auto shut-off for increased battery life• Displays KGF, BAR, PSI, KPA measurement• Large face LCD digital read-out• Unit covered with rubber sleeve for extra comfort and durability • On Power Button, auto shut off in 90 seconds if not in use• LCD Back Light• Allows accurate reading of tire pressure, assisting with TPMS (Tire
Pressure Monitoring Systems)• Two position lever. 1st position deflates, 2nd position inflates• Works on a nitrogen system• With 21" Hose
Features:
EUROHE103 : HIGH TRANSFER SPRAY GUN WITH 1.3MM NOZZLE & PLASTIC CUP
DURABLE & LIGHTWEIGHT ? Forged body provides longer tool life ? Anodized body for corrosion protection ? Slick finish for faster & easier cleaning ? Internal coated passages ? Stainless steel needle and fluid tip ? Lightweight: 325 grams (0.7 Lbs) HIGH EFFICIENCY ? Unique pattern designed for great coverage, optimal overlapping ? Low overspray (bounce back) ? Great transfer efficiency ? Superior atomization ? Innovative High Efficiency (HE) advanced technology QUICK THREAD TECHNOLOGY ? 1 Turn to lock/unlock the air cap ? 3 Turns to lock/unlock the fluid tip ? Wide threads for easy cleaning ? M16*P1.5 female thread fluid joint ? Compatible with most traditional and disposable cup systems SMOOTH OPERATION ? Soft trigger pull to reduce fatigue ? Precise lubricated adjustment knobs for better control ? Innovative CNC machining to avoid the need for gaskets behind the fluid tip SPECIFICATIONS: Nozzle Size: 1.3mm Cup Capacity: 600ml Operation Pressure: 29psi Weight: 0.7lbs. (325g) Dimensions W x H: 7" x 5-3/4" (175mm x 145mm) Avg. Air Consumption: 10.5-12.5cfm Air Inlet Thread NPT: 1/4" Required Compressor: 3-5hp Max. Pattern at 6" to 8" Distance: 11"-13" (280-330mm) Air Hose I.D. Size: 6-8mm
Features:
HVLP GRAVITY FEED SPRAY GUN - 1.3MM NOZZLE WITH ALUMINUM CUP
Ÿ Available in 1.3mm,1.5mm, 1.7mm and 1.9mm nozzle sizesŸ Fast working speed and wide spray fan patternŸ Round to flat fan controlŸ Stainless steel needle and fluid tip makes it suitable for waterbaseŸ Includes diaphragm regulator
Ÿ Nozzle Size: 1.3mm, 1.5mm, 1.7mm, 1.9mmŸ Operation Pressure: 41-44psiŸ Net Weight: 3lbs. (1.36kg)Ÿ Dimensions W x H: 13-1/2" x 6"Ÿ Avg. Air Consumpt: 10cfmŸ Air Inlet Thread NPT: 1/4"Ÿ Required Compressor: 3hpŸ Mat Pattern at 8" Distance: 9-10-1/2" (230-265mm)Ÿ Air Hose I.D. Size 4-6mm
Features:
Specifications:
Dent Masters CorporationB 211, Arjun Centre, Plot No 231, Govandi Station Road, Govandi East, Mumbai 400088.
Tel : 25503037 / 25503038 | Email : [email protected]: www.dentmastersindia.com