Pneumatic sprue picker presentation
-
Upload
rohit-wavle -
Category
Documents
-
view
56 -
download
7
Transcript of Pneumatic sprue picker presentation
Pneumobot Sprue Picker Robot
Rohit Wavle(68)
Abhijeet Pawar(48)
Prem Bawa(04)
Swapnil Ahire(01)
Guided by Prof. V.V Shinde
Vote of Thanks
Special thanks to
Janatics Pneumatics ,Swargate , Pune.
Mr.Kunal Sahare and Vishal for help
Poona gear mfg, Milind Bayasker ,Allwin Fedrick at Talwade and Malik khan sir at Lonavla for mfg help
Mr. Vijay Samangadkar at Nigdi for micro –controller help and Mr.Ramesh Wavle for all technical help.
Contents
• Problem Statement
• Plastic Injection moulding
• Robotics
• Automation 2012 visit & IATF 2013
• Design and analysis
• Pneumatics and electricals
• Fabrication
Problem Statement
There are 14 Plastic small-scale industries in Industrial Estate at
Nangergoan. Plastic Injection moulding machines are used for
manufacture of domestic ,automobile and daily use plastic parts.
Company description
1. To Enhance the productivity in IMM industry using
automation and resolve issues regarding workers.
2. To perform pick and place operation within 8 seconds from IMM to Granulator.
Purpose of Project
1. Consistency
2. Fast Cycle time
3. Less Labor Cost
4. Product Hygiene
5. Safety Issue
6. 2nd level Automation
7. Continuous Operation
8. Productivity
Abstract
• Electro-pneumatic robot for automation in plastic IMM having mechanical gripper to remove sprue (waste component) from the mold and placing it into Granulator.
• A linear and rotary pneumatic actuator will be used to give required motions.
• Mitre Bevel gear to transmit power and torque. Linear nylon made slider for easy sliding motion
.
Methodology
1. Robot models and IMM study 2. Exhibitions 3. Industry survey 4. Brain storming 5. Pneumatics and Electricals. 6. Design and material selection 7. Analysis 8. Design review and synthesis 9. Fabrication 10. Testing and results
Process flow in IMM :
Parts of Horizontal Injection moulding machine
*
Schematic of thermoplastic Injection molding machine
Arburg machine specifications :
Clamp Tonnage / Machine
Tie Bars Clearance HxV (mm)
Injection Weight PS. g (oz)
Min - Max Mould Height. (mm)
Opening Stroke Max (mm)
25 Arburg 221 32 (1.13) 150 - 300
200
40 Kawaguchi
275 x 245
73 (2.57) 150 - 250
230
*55 Arburg
320 x 320
78 (2.5) min 225 350
*88 Arburg
370 x 370
89 (3.4) min 200 450
*110 Arburg
420 x 420
153 (5.9) min 250 575
125 Kawaguchi
435 x 375
226 (7.97) 180 - 400
355
140 Kawaguchi
435 x 375
260 (9.17) 180 - 400
355
175 Kawaguchi
445 x 445
372 (13.1) 250 - 450
400
*220 Sumitomo
610 x 560
532 (18.8) 250 - 580
510
265 Kawaguchi
550 x 550
649 (22.9) 200 - 550
500
*280 Sumitomo
685 x 635
733 (25.9) 300 - 620
580
300 Dongshin
685 x 580
970 (34.1) 300 - 680
600
Component with sprue Component without sprue
Proposed designs 1. Guide way cartesian model
2. Articulated type (scara,revolute)
3. Cartesian type
4. Swing arm type (vertical)
5. Swing arm type (horizontal)
Company survey :
Sr.
No.
Company name Owner Design selection
01 Inplast moulding Vikas shah Swing vertical
02 Polycom Engg. Mr.Guggle Swing horizontal
03 Corvi polymers Usha Guggle Cartesian
04 Kiran vijay mangtani Kiran vijay
mangtani
Swing horizontal
05 Vinij productions Sanjay shah Swing horizontal
06 Deepak plastic Deepak Dsouza Cartesian
07 Macklon moulders 1 Nitin Shah Swing horizontal
08 Macklon moulders 2 Nitin Shah Swing horizontal
09 S. S Engineers S.P. Suryavani Articulated(scara)
10 Santapeth polymers V.D Magtani Cartesian
11 Nila ratnaparkhi Nila ratnaparkhi Swing vertical
12 Pooja plastic D.M Suryavani Articulated (scara)
13 Thermoplas Industry Ramesh bartake Swing horizontal
14 RLK shreeram plastic R.G Padtare Swing vertical
Types of products :
Robot Applications inside & outside the Mold
Two Plate Mold
Sprue Picking Only
Sprue and Parts Removal
Part Removal
Sprue Picking
with Part
Dropping
Sprue Picking
with products
connected
Part removal
with the sprue
or without the
sprue
Simple Operation
Taking out the
Sprue from the
mold and
dropping it.
( Inside of the
mold, Conveyor ,
Box )
Remove Parts, 90deg Rotation and Placing
the parts ( Conveyor, Box)
Mounting Position of Robot Pick Operation
Arm : Double arm or Single Arm
Descent Position : Nozzle or Clamp
Motion Style : U or L
Operation : Vacuum, Chuck, Gripper
Robot case-study models :
1. Artic RSL
2. Yushin Hop 5
3. Sailor RX-8
4. Wittmann Battlefeld w702
5. Sepro S3 picker
6. Arburg integral picker
7. Phoenix
Exhibitions
1. Automation 2012 ,NSE Bombay
2. India Automation Technology Fair.
We visited automation 2012 held at NSE Goregoan(east) on 7th & 8th September 2012
We visited IATF 2013 held at NSE Goregoan(east) on 2nd February 2013
Complete Process Chart
Yes
No
Raw material (RM) for
coloring and mixing
Arrival of Raw
materials & mould
Mould on moulding
machine using hoist
RM feed to the Hopper
Moulded components
for finishing
Sprue & defectives
to granulator
Component package
and storage
Dispatch of Component
Start
End
Is product defective?
Catia model of Picker machine on fixed platten
Drafted image
Cylinder selection
Cylinder selection : Cylinder selection from Janatics Pneumatics catalogue through requirement of std stroke, bore and force. 3 A52 magentic cylinders and 1 A03 series male threaded cylinder for gripper.
Dimensions and mechanisms of robot were finalized from cylinder selected. •Swing Cylinder Stroke 50mm ,Diameter 25mm •Kick Cylinder stroke 80mm ,Diameter 20mm •Vertical cylinder stroke 160mm ,diameter 16mm
•Gripper cylinder stroke 20mm, diameter 16 mm.
Mechanisms
1. Quarter turn pulley 2. Power screw 3. Electric motor 4. Rack and pinion 5. Pneumatic 4 piston actuator 6. Spiral Bevel gear pair
Design considerations :
We have used factor of safety of above 3 everywhere except in case of gear we have fos = 2.4
Our design is safe at 8 bar pressure. and gear pair fos is 1.2 at 8 bars. Solenoid valves can operate at max of 8 bar pressure All other pneumatic component can sustain 10 bar pressure.
Design innovations
Mitre bevel gear eliminated the need for wrist rotation of gripper plus reduced 1 movement of vertical cylinder.
Arc bracket provides rotation on either side.
Self made slider from nylon on Aluminium was made.
Gripper was developed from compact cylinder.
Analytical design and analysis
Our calculations predict that each cylinder can retract or extend in 0.2 seconds so we retrict ourself to max. of 4 to 6 bar pressure operation.
As cycle is to be completed in 8 seconds, 4 bar pressure is sufficient.
We designed Mitre bevel gear from Design data book taking cylinder specs into account.
From gear pair , Shaft was designed. Bearing selection was done then
Column was checked for buckling analysis. Swivel motion arc bracket was made.
Cantilever beam analysis for carriage ,then Mountings plus sliding chuck was designed.
Strong foundation design and guideways for vertical cylinder were provided at last.
Design of assembly in CATIA
Part drawing was done in CATIA V5 and then assembly was done.
Material was applied appropriately and CG ,weight ,MI were calculated then.
Drafting was done for mfg drawings to workshops.
Material selection :
1. Cast Iron It has good damping property and less density than steel but costly and not readily available. Density= 7250 kg/m^3. 2. Mild Steel It has compartively less damping but good welding characteristics and cheap plus readily available. Density= 7850 kg/m^3 3. Aluminium Light weight with hardness and stiffness. Easy riveting possible. Density = 2710 kg/m^3 4. Nylon For easy sliding of carriage , nylon or teflon was considered.
Ansys analysis
Critical components like horizontal shaft, arc bracket , base plate were examined for static and dynamic failure.
Fos was safe for design made.
Pneumatic circuit concept
1. Push button operated 2. Interlocking circuit using limit switch operation 3. Electro-pneumatic circuit using relays,reeds and solenoids. 4. Micro- controller based. 5. PLC based.
Pneumatic circuit working
Automation Studio 5.0
Pure pneumatic circuit was made in this software but electro pneumatic circuit was just developed but not simulated.
Fluidsim and autosim (SMC) softwares were tried out.
Electro-pneumatic circuit : The sensing time of reed switch is 1 millisecond. Reeds operate at 24 V DC Solenoid valves operate at 24 V DC with 104 mA current. As relay logic and logic gates could not be built , we choose controller. So A micro controller 8052 was used taking sensors as inputs (8) and solenoids as output (8) . Reset function was provided in case of sudden stops. C programming successfully implemented the required logic on controller.
Gripper
1. Mechanical 2 finger gripper
2. Vaccum gripper
2 finger gripper had to be imported hence made a compact gripper from small double acting cylinder having one fixed jaw and other movable.
Habonim 4 piston actuator :
Robot Specifications
1.Payload : ½ kg 2. Weight : 22.4 kg 3. Cost : 51,200 uptil now 4. Control method : Micro controller 5. Material : Mild steel for foundation, Aluminium for manipulator 6. Configuration : Semi- cylindrical (swing arm) 7. DOFs : 4 (3 cylinder + 1 gripper) 8. Actuator : Mitre bevel gear rotation using swing cylinder 9. Kick stroke : Linear nylon guide rail. 10. Vertical stroke : Gripper with guide way 11.M/c tonnage : 30 to 55 tons 12. Power supply : 24 V DC ,1 A 13. Air consumption : 14. Swing angle : 50 to 90 deg both sides. 15 .Max pressure: 6 bar 16. Working pressure: 2 to 4 bar 17. Overall cycle time : within 8 secs.
BOM 1 out of 4 bills Sr. no Model no. Specification /product Qty Cost Total
1 A52020080O DA 20 x 80 Cyl.(Mag) Basic 1 1243 1243
2 A52025080O DA 25 x 50 Cyl.(Mag) Basic 1 1323 1323
3 A52016160O DA 16 x 160 Cyl.(Mag) Basic 1 1176 1176
4 DS254SS60-W 1/8 -5/2,24V DC Double Sol. valve 4 2030 8120
5 GR5105006 Flow control valve 1/8 x Dia 6 6 224 1344
6 WP2210650 Male elbow Dia 6 x 1/8 8 43 344
7 MS022 DOUBLE FOOT MOUNTING (DIA 20,DIA 25) 1 234 234
8 AA022 CLEVIS FOOT BRACKET (DIA 20,DIA 25) 1 148 148
9 AP010 ROD END SPHERICAL EYE (DIA 25,DIA 32) 2 560 1120
10 AP008 ROD END SPHERICAL EYE (DIA 20) 1 511 511
11 AM1016 Reed switch with clamp (A52016) 2 451 902
12 AM1020 Reed switch with clamp (A52020) 2 451 902
13 AM1025 Reed switch with clamp (A52025) 2 451 902
14 FRCLM146234/W FRCLM-3/8(40Micron,10bar)with Wall mounting brack 1 2649 2649
15 WP2110851 Male connector Dia8x 1/4 2 36 72
16 M0030104 Manifold (4 Valves) DS2-1/8,5/2,5/3 1 1355 1355
17 ASC0161 Silencer (Conical-1/4) 2 83 166
18 WP2110852 Male connector Dia8x3/8 1 41 41
19 A2G02 Pressure gauge(0-10bar)R1/8,Dia 40 1 171 171
20 WH00B08 TUBE(PU) OD8 (Blue) 2 56 112
21 WH00B06 TUBE(PU) OD6 (Blue) 8 31 248
22 Parallel Gripper (10/ 16 dia) 1 0
23 Reed switch for parallel gripper 2 0
24 WC1 Tube cutter 1 135 135
Total 23218
Motion sequence of Pneumobot:
1. vertical arm descend Cylinder A+ 2. strip forward Cylinder B+ 3. grip on / vaccum on Gripper C+ 4. strip backward Cylinder B- 5. vertical arm retract Cylinder A- 6. swing outward Cylinder D+ 7. grip off /vaccum off Gripper C- 8. swing inward Cylinder D- We implemented the logic A+B+C+B-A-D+C-D- using relay(4 three pin & 4 five pin relay) along with 4 double solenoid valve and 8 reed switches(magnetic sensor). Above sequence can be changed as required using micro-controller or PLC. For interfacing with IMM , micro-controller or PLC is needed.
1. Milling 2. Boring 3. Tapping 4. Welding 5. Grinding 6. Drilling 7. Turning and Facing 8. Laser cutting 9. Hack saw cutting 10.Rivetting 11.Surface finishing 12.Grub holes
Fabrication operation
Material was purchased from Bhosari. Manufacturing was done at Talwade,Akurdi Final mfg and finishing was done at Nangergoan ,Lonavla
Final Assembly
All components were joint and made ready.
Piping was done properly along with sensor wiring connection through insulation casing.
Manifold and controller housing was done. Gauge and frc unit was interfaced then.
Thank You