PN16, WITH TIE RODS - AVK International A/S · Dismantling Joint PN16 for water and waste water....
2
· Cost effective installation and dismantling with only a few tie-rods · Compensates for axial displacement of the pipe during installation and dismantling as the telescopic action between the inner and outer flange body allows for longitudinal adjustment · Designed with a gland ring arrangement to apply compression on the seal · Standard axial adjustment of ±60 mm · Mild steel with fusion bonded epoxy coating to WIS 4-52-01 · Studs, nuts and tie-rods of zinc plated and passivated steel 4.6 · Optionally with studs, nuts and tie-rods of stainless steel A2 or acid-resistant stainless steel A4 · Optionally PN 25 · Option of any drilling within design tolerance. Features: Product description: · Standard flange drilling to EN1092-2 (ISO 7005-2), PN 16 · Type tested to 1.5 X PN Standards: Dismantling Joint PN16 for water and waste water. Temperature range: -10° C to +70° C. Insulation essential for temperatures of 0° C and below. Test/Approvals: AVK dismantling joints provide easy installation and disassembly of flanged pipework and fittings, or flanged equipment such as valves, meters and pumps. The dismantling joints compensate for axial displacement of the pipe during installation and dismantling. PN16, WITH TIE RODS AVK DISMANTLING JOINT 265/30-002 1/2 20-nov-2017 13:09 js - The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme. COPYRIGHT©AVK GROUP 2017
Transcript of PN16, WITH TIE RODS - AVK International A/S · Dismantling Joint PN16 for water and waste water....
· Cost effective installation and dismantling with only a few tie-rods· Compensates for axial displacement of the pipe during installation and dismantling as the telescopic action between the
inner and outer flange body allows for longitudinal adjustment· Designed with a gland ring arrangement to apply compression on the seal· Standard axial adjustment of ±60 mm· Mild steel with fusion bonded epoxy coating to WIS 4-52-01· Studs, nuts and tie-rods of zinc plated and passivated steel 4.6· Optionally with studs, nuts and tie-rods of stainless steel A2 or acid-resistant stainless steel A4· Optionally PN 25· Option of any drilling within design tolerance.
Features:
Product description:
· Standard flange drilling to EN1092-2 (ISO 7005-2), PN 16
· Type tested to 1.5 X PN
Standards:
Dismantling Joint PN16 for water and waste water. Temperature range: -10° C to +70° C. Insulation essential for temperatures of 0° C and below.
Test/Approvals:
AVK dismantling joints provide easy installation and disassembly of flanged pipework and fittings, or flanged equipment such as valves, meters and pumps. The dismantling joints compensate for axial displacement of the pipe during installation and dismantling.
PN16, WITH TIE RODS
AVK DISMANTLING JOINT 265/30-002
1/220-nov-2017 13:09js -
The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.
COPYRIGHT©AVK GROUP 2017
PN16, WITH TIE RODS
AVK DISMANTLING JOINT 265/30-002
Component list:
1
2
3
1.
2.
3.
Flanged sleeve
Gland ring
Seal
Steel Fe 430B
Steel Fe 430B
EPDM rubber
4
5
6
4.
5.
6.
Stud, nut and washer
Tie-rod, nut andwasher
Flanged spigot
Steel gr. 8.8, zinc plated, passivated
Steel gr. 4.6, zinc plated, passivated
Steel Fe 430B
Components may be substituted with equivalent or higher class materials without prior notification.
Reference nos. and dimensions:
AVK ref. no. DN
mm
Flange
drilling
D
mm
E
mm
L
mm
L11
mm
Theoretical
weight / kg
265-30-0300-11
265-30-0350-11
265-30-0400-11
265-30-0450-11
265-30-0500-11
265-30-0600-11
265-30-0700-11
265-30-0800-11
265-30-0900-11
265-30-1000-11
265-30-1200-11
300
350
400
450
500
600
700
800
900
1000
1200
PN16
PN16
PN16
PN16
PN16
PN16
PN16
PN16
PN16
PN16
PN16
460
520
580
640
715
840
910
1025
1125
1255
1485
410
470
525
585
650
770
840
950
1050
1170
1390
575
575
585
585
605
625
625
645
645
665
665
360
360
360
360
360
360
360
360
360
370
370
68
80
104
121
149
186
203
233
261
356
481Row to make sure table is never blank
2/220-nov-2017 13:09js -
The designs, materials and specifications shown are subject to change without notice. This is due to the continuous development of our product programme.
COPYRIGHT©AVK GROUP 2017
