PLUMBING SUNDRIES - Canplas...PLUMBING SUNDRIES PRICE LIST CPS-0219 FEBRUARY 1, 2019 - 2 - TABLE OF...

PRICE LIST CPS-108 JANUARY 4, 2010

DESC. PART # SKID QTY.

CTN. QTY. SIZE PRICE

EACH DESC. PART # SKID QTY.


EACH

PRICE LIST

CPS-0219REVISION:

January 8, 2020

www.canplasplumbing.com 1-800-461-5300

PLUMBING SUNDRIES

FEBRUARY 1, 2019SUPERCEDES CPS-0817 (AUGUST 25, 2017)

Our website pricing is the current list price and may vary from our printed price list. Please visit our website for up-to-date information.

PLUMBING SUNDRIESPRICE LIST CPS-0219 FEBRUARY 1, 2019

www.canplasplumbing.com - 2 -

TABLE OF CONTENTS Page

Air Admittance Valves 3

Specialty Flange Repair Rings 4

Vent Pipe Cap 4

ABS & PVC Shower Drains 5

ABS & PVC Utility Drains & Cleanouts 6

Floor Sinks 7

Bell Trap Drains 7

Brass Clean Out Plugs 7

Expansion Joints 8

ABS & PVC Backwater Valves 9

Backwater Valve Components 11

Waste & Overflow - Indirect 12

Waste & Overflow - Convertible 13

Waste & Overflow - Half-kits 14

Tubular Brass 14

P.O. Plugs 15

Numerical Index 16

TERMS AND CONDITIONS OF SALE1. GeneralExcept where otherwise agreed to in writing by Canplas all sales are subject to the following terms and conditions. Canplas reserves the right to modify these terms and conditions at its discretion and without notice.

2. PricesAll prices quoted or published are F.O.B. Canplas’ factory or authorized warehouse. Published prices are subject to change without notice until orders are accepted by the issuance of an order confirmation. Canplas may agree in writing to protect prices for an extended period of time for specific projects or quotations. Orders may be shipped in whole or in part at Canplas’ discretion and will be immediately invoiced upon shipment. Any and all sales, manufacturers’ taxes and/or other charges levied or imposed by any governmental authority, foreign or domestic, upon any merchandise sold or contracted to be sold shall be paid by the purchaser and added to the purchase price unless satisfactory and appropriate tax exception certificates are supplied to the Seller.

3. Payment TermsUnless other terms of payment are agreed to in writing by Canplas or otherwise indicated on specific published price lists, payment is due upon delivery of the products. If applicable, cash discounts, expressed as a percentage, are calculated on the net invoiced prices before any taxes, freight or other charges and can only be deducted from payment if Canplas receives payment from the purchaser on or prior to the due date. Interest shall be charged at a rate of 1.5% per month equating to an annual rate of 18% on all overdue accounts. The granting of credit by Canplas is based on its evaluation of the purchaser’s financial condition. If such financial condition does not justify continuance of shipment on credit, Canplas may require full or partial payment in advance.

4. OrdersPurchaser’s orders are conditional upon satisfactory credit approval by Canplas. Minimum order values shall be as published in the applicable price list or as agreed to in writing by Canplas. Once confirmed by Canplas, orders for custom made products manufactured to the Purchaser’s specifications and orders for large quantities of non-inventoried products cannot be cancelled, modified or returned, without the written consent of Canplas.

5. ShipmentsAll shipments are F.O.B. Canplas’ factory or authorized warehouse. Quoted delivery schedules or those contained in an order acknowledgement are approximate only. Shipment will be made within reasonable proximity to the quoted delivery schedule. Prepaid orders will be shipped via the most economical method at the discretion of Canplas. Should the customer select an alternative method with a higher rate, the difference will be charged to the customer

6. Shipping ResponsibilityCanplas’ responsibility ceases when the carrier signs for the shipment in good order. Under no circumstances will Canplas be responsible for any damage caused by delays in shipment, whether resulting from causes within or beyond the control of Canplas. Canplas shall bear no liability for products lost or damaged during transit. Canplas is not responsible for loss or damage to goods in transit, or delays or carriers in delivering shipments or for damages resulting from such delays as those caused by fire, explosion, act of God, strike or other difference with workmen, shortage of material or labor, delays in transportation, government restrictions, war, riot, civil commotion or cause beyond our control. Where shortage or damage is apparent, details should be noted by the carrier on the freight bill at the time of delivery. In case of concealed damage, carrier should be called at once to inspect the damaged shipment. Do not return damaged goods.

7. Returned GoodsPrior to returning any products for any reason the purchaser must obtain a Returned Goods Authorization (RGA) form from Canplas which must accompany the goods being returned. For returned goods that are acceptable for credit, a restocking charge of twenty-five percent (25%) will be assessed against the credit to cover handling, inspection and/or repackaging. Products must be returned freight prepaid, unless otherwise authorized by Canplas. Products must be received in good saleable condition and, if required, in full carton quantities and in their original packaging. Canplas reserves the right to refuse the return of certain products, such as custom-made configurations, obsolete products, excessive quantities or other specialty products. Canplas may, at its discretion, direct that products be destroyed for credit rather than returned.

8. Product ModificationsCanplas reserves the right to make changes or improvements to its products in its sole discretion and without assuming any further obligation.

9. Force MajeureCanplas shall not be responsible or liable for any non-performance or delay in performance hereunder or any loss or damage of any kind whatsoever, direct or indirect, suffered by the purchaser, subsequent purchasers, ultimate users of the goods or any other person, as a result of any causes beyond the reasonable control of Canplas including, without limitation, price alterations, delay in shipments, strikes, lock-outs, fires, floods, civil commotion, riots, wars, acts of God, embargos, labor shortages, walk-outs, work slowdowns, accidents, breakdowns, delays in manufacture, transportation or delivery of goods or materials, shortages of materials or supplies or government acts or regulations.

10. MiscellaneousProduct names used in Canplas published documents, electronic or printed, are for identification purposes only. All trademarks registered or otherwise, are the property of their respective owners.

11. Governing LawThis agreement and all associated rights and obligations shall be governed by the laws of the province of Ontario and all actions commenced pursuant hereto shall be brought in a court of jurisdiction residing in the province of Ontario.

12. WarrantyCanplas products are carefully inspected for manufacturing defects, however, it is not always possible to detect hidden defects. Unless otherwise specifically stated in writing, Canplas products are warranted only to the extent that Canplas will replace without charge, products proven to have manufacturing defects within 6 months of the date of delivery thereof and provided Canplas has been given an opportunity to inspect the product alleged to be defective and the installation or use thereof. NO WARRANTY IS INCLUDED AGAINST ANY EXPENSE FOR REMOVAL, REINSTALLATION OR OTHER CONSEQUENTIAL DAMAGES ARISING FROM ANY DEFECT. THE WARRANTIES SET OUT ABOVE ARE THE ONLY WARRANTIES MADE BY SELLER AND ARE EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.






EACH

- 3 - www.canplasplumbing.com

by

Eliminate the hassle and expense of

connecting drain fixtures to an

external vent line

Allows air to enter the drainage system, while preventing sewer gases from escaping. The AAV only opens under negative pressure in the piping system, while remaining closed if there is positive or ambient air pressure - Eliminating the need for external venting!

Ideal for: •Island kitchen sinks•Bathroomsinks•Barsinks•Bathtubs•Renovation projects

1-1/2” & 2” For fixture and branch ventingAir Admittance Valves

ABS

13112011 10 1-1/2 & 2 55.82PVC

13212011 - 10 1-1/2 & 2 55.82



EACH






EACH


VENT PIPE CAPPlastic

material • InjectionmoldedinPlastic. function • Preventsdebrisfromenteringventpipeswithoutobstructingair flow. features & benefits • Interiorsupportsaccommodate either 3" or 4" pipe in a variety of materials(ABSDWV,PVCDWVandPVCsewer). (No double stocking). • Cap is securedtoventpipebyutilizingtwoself-tappingscrews. (Reduces chance of unauthorized removal). • Installationscrewsarerecessedintothecap. (Eliminating a possible hazardduetoprotrudingscrews). • Coloursaredesignedtomatchthoseofthepipe(whiteandgreen) foraprofessional appearance. • Stainlesssteelinstallationscrews are secured into the cap,priorto shipping (prevents accidental loss or replacement).

VENT PIPE CAP

STAINLESS STEEL CLOSET FLANGE REPAIR RING133608 2160 15 4” x 3” 37.95



EACH

VENT PIPE CAP133070GN 1080 15 3"and4" 15.46

133070W 1080 15 3"and4" 15.46

CLOSET FLANGEREPAIR RING






EACH


ROUND GRATE DRAINABS with White Strainer

332542 1152 8 1½, 2 30.74PVC with White Strainer

322542W 1152 8 1½, 2 30.69ABS with Stainless Steel Strainer

332542SS 1152 8 1½, 2 39.50PVC with Stainless Steel Strainer

322542WSS 1152 8 1½, 2 41.06


332041 1800 25 1½ 21.77

332042 1800 25 2 24.60PVC with White Strainer

322041W 1800 25 1½ 35.28

322042W 1800 25 2 38.93ABS with Stainless Steel Strainer

332041SS 1800 25 1½ 39.90

332042SS 1800 25 2 37.40PVC with Stainless Steel Strainer

322041WSS 1800 25 1½ 54.02

322042WSS 1800 25 2 58.51

STAINLESS STEEL CLOSET FLANGE REPAIR RING133608 2160 15 4” x 3” 37.95


332241 480 10 1½ 37.41

332242 480 10 2 37.41PVC with White Strainer

322241W 480 10 1½ 43.89

322242W 480 10 2 43.89ABS with Stainless Steel Strainer

332241SS 480 10 1½ 53.78


322241WSS 480 10 1½ 50.46

322242WSS 480 10 2 50.46

4” SQUARE GRATE DRAINABS with Stainless Steel Strainer

332341SS 480 10 1½ 43.01


322341WSS 480 10 1½ 59.38

322342WSS 480 10 2 59.38

SHOWER DRAINS

Metal

GREAT WHITE® TILED SHOWER DRAINForTiledShowerBasins

GREAT WHITE® DRAIN PRODUCTSDesignedandmanufacturedwithinnovativefeaturesforsuperiorperformance,qualityandvalueabovethe

competition.

Plastic

GREAT WHITE® SHOWER DRAIN WITH FEMALE THREADED BODY, SolventWeld,HxDrainGrate

Plastic Metal

NOTE:Includes2”x1½”FlushReducerBushing

GREAT WHITE® 45° OFFSET SHOWER DRAIN WITH FEMALE THREADED BODYSolventWeld,HxDrainGrate

Plastic Metal






EACH


LIGHT DUTY UTILITY CLEANOUT with gasket & cast aluminum lid, solvent weld, H

ABS

332143C 720 10 3 27.23

332144C 432 6 4 54.43PVC (white)

322143WC 720 10 3 28.77

322144WC 432 6 4 63.87

LIGHT DUTY UTILITY DRAIN with cast aluminum grate - solvent weld

ABS

332143 720 10 3 23.33

332144 432 6 4 31.70PVC (white)

322143W 720 10 3 24.31

322144W 432 6 4 26.03

LIGHT DUTY UTILITY DRAIN with test plate & cast aluminum lid - solvent weld

ABS

332144T 432 6 4 29.39

ECONOMY OFFSET SHOWER DRAIN with stainless steel strainer, solvent weld - H x drain grate

ABS

331962SS - 30 2 15.40

ECONOMY LOW-PROFILE BOLT-DOWN SHOWER DRAIN with stainless steel strainer

ABS

331957SS - 20 2 19.42PVC (white)

321957WSS - 20 2 32.84

BRASS NO-CAULK SHOWER DRAIN with snap-in stainless steel strainer

331952SS - 1 2 59.83

ECONOMY SHOWER DRAIN with strainer, solvent weld H x drain grate

ABS

331982SS - 20 2 17.33PVC (white)

321982WSS - 20 2 23.93

REPLACEMENT SNAP-IN STRAINER GRATE (FOR GREAT WHITE® SHOWER DRAINS)Fits1½”and2”ShowerDrains

MetalPlasticMetal

SHOWER DRAINS Continued

UTILITY DRAINS& CLEANOUTS

ROUND GRATEWhite PVC Plastic

321942-2W - 1 - 1.76Stainless Steel

331942-2SS - 160 - 9.70Brushed Nickle Strainer

331942-2BN - 160 - 13.92Oil rubbed Bronze Strainer

331942-2ORB - 160 - 13.92

SQUARE GRATEStainless Steel

331943-2SS - 160 - 10.47Brushed Nickle Strainer

331943-2BN - 160 - 15.04Oil rubbed Bronze Strainer

331943-2ORB - 160 - 15.04






EACH


PIPE END DRAIN GRATEPVC (white)

321842W 17150 50 2 5.29

321843W 7200 50 3 5.89

321844W 3600 25 4 8.63PVC (grey)

321842 17150 50 2 9.60

321843 7200 50 3 6.25

321844 3600 25 4 11.09

BELL TRAP DRAIN SQUARE 6” - fits over 1½”orinto2”hubconnection-solventweld

ABS

332155 - 10 1½, 2 Spg 11.21PVC (white)

322155W - 10 1½, 2 Spg 15.48

BELL TRAP DRAIN SQUARE 9” - fits over 3”orinto4”Schedule40DWVpipe-solventweld

ABS

332158 - 10 3, 4 31.78

BRASS RECESSED HEAD CLEANOUT PLUGS - MPT333064BR - 50 4 11.48

333068BR - 10 6 55.11

BRASS RAISED HEAD CLEANOUT PLUGS - MPT333056BR - 50 3½ 9.03

333054BR - 50 4 11.07

STANDARD FLOOR (PVC-white body)4” Hub

394708 90 5 9 x 9 x 6 SEE C39PRICE LIST

4” Hub


3” Hub


3” Hub


SINK GRATES (PVC White)Full Grate

394709A 420 5 9 x 9 SEE C39PRICE LIST

394712A 240 5 12 x 12 SEE C39PRICE LIST

Three Quarters Grate

394709B 625 5 9 x 9 SEE C39PRICE LIST

394712B 240 5 12 x 12 SEE C39PRICE LIST

Half Grate

394709C 625 5 9 x 9 SEE C39PRICE LIST

394712C 240 5 12 x 12 SEE C39PRICE LIST

UTILITY DRAINS& CLEANOUTS

UTILITY DRAINS & CLEANOUTS Continued

Consult your local plumbing official or plumbing code to confirm compliance.

BELL TRAP DRAINS

CLEANOUT PLUGS

FLOOR SINK REPLACEMENT HARDWARE KIT

Kit Number

For Drains Includes List Price

3947NNH 324708 #10-16 x 1-1/2” Long Flat Head Screw (2) #10 x 5/8” Long Hex/Phillips Screw (12)

SEE C39PRICE LIST

324709

324712

324713

FLOOR SINKS

FLOOR SINK REPLACEMENT STRAINER

394712-4 2700 150 5 SEE C39PRICE LIST






EACH


EXPANSION JOINTS

Allows for the expansion and contraction of pipe due to temperature change and the shrinkage of building materials that the pipe is connected to.

Expansion Joints• Injected molded in ABS (Black) and PVC (Grey).• Nitrile Buna-N O-ring.• PQAA Grease #2 lubricant.

Features• Allows for up to 3” (7.6 cm) of travel (Type I) or 8” (20.3 cm) of travel (Type II).• Flow direction and proper degree of extention indicated on expansion joint.• Approved for use in vertical applications.

Benefits• Allows movement without leakage.• Removes the stress from both pipe and fittings which could cause failure of the piping system.

Applications• For Drain, Waste & Vent applications (non-pressure).• For Log Homes.• For straight pipe runs of 30 ft. (9.1 m) or longer.

Approvals • CSA Certified, IAPMO Listed

Installation Instructions1. Locate unit (plunger side up). Perferably beneath lowest �xture.2. Push plunger (inner section) until unit is fully closed. 3. Pull plunger back out speci�ed distance according to temperature at time of installation.

Fahrenheit Degrees Celsius Degrees Distance

30507085

0102030

2.5” or 65mm2.25” or 55mm2” or 50 mm1.75” or 45mm

Based on 20 feet (6 meters) installation.

, IAPMO listed

White

EXPANSION JOINT - HxHABS TYPE I - 3” Travel

113811ABC 1728 12 1½ SeeC10-11PriceList

113812ABC 1080 15 2 SeeC10-11PriceList


PVC TYPE I - 3” Travel

213811ABC 1728 12 1½ SeeC20-21PriceList



ABS TYPE II - 8” Travel


PVC TYPE II - 8” Travel


EXPANSION JOINT - HxSpgEndPistonABS TYPE I - 3” Travel

113811BBC 1728 12 1½ SeeC10-11PriceList

113812BBC 1080 15 2 SeeC10-11PriceList


PVC TYPE I - 3” Travel

213811BBC 1728 12 1½ SeeC20-21PriceList



Exclusively from






EACH


90° BACKWATER VALVE - Spg x H x HABS

123293D 270 15 For 3” BWV 194.27

LID FOR ABS (BLACK) ACCESS SLEEVESABS Lid

123287-2 - 1 3 19.43

123285-2 - 1 4 22.94

BACKWATER VALVE SLEEVE KIT - For use with Sewer Pipe (Standard, DR35 or DR28)

ABS

123302 1440 10 For 1½” & 2” BWVs 55.05PVC (white)

223302W 1440 10 For 1½” & 2” BWVs 43.98

BACKWATER VALVE with 16” access sleeve and ABS lidABS - With DWV Hubs

123271 - 1 1½ 164.80

123272 128 1 2 164.80

123287 84 1 3 168.36

123285 45 1 4 181.33PVC (grey) - With DWV Hubs

223287 84 1 3 134.53223285 45 1 4 144.86PVC (white) - With DWV Hubs

223271W 128 1 1½ 131.68

223272W 128 1 2 131.68

223287W 84 1 3 134.53

223285W 45 1 4 144.86PVC (white) - With Sewer Hubs

223290W 84 1 3 134.53

223288W 45 1 4 144.86

BACKWATER VALVEABS - With DWV Hubs

123281 1080 15 1½ 84.16

123282 1080 15 2 129.52

123283 320 10 3 142.45

123284 128 4 4 155.42

123286 48 1 6 388.55PVC (grey) - With DWV Hubs

223281 1080 15 1½ 67.25

223282 1080 15 2 103.47

223283 320 10 3 113.84

223284 128 4 4 124.17

BACKWATER VALVE - WHITE PVCPVC (white) - With DWV Hubs

223281W 1080 15 1½ 67.25

223282W 1080 15 2 103.47

223283W 320 10 3 113.84

223284W 128 4 4 124.17

223286W 48 1 6 310.44PVC - With Sewer Hubs

223291W 288 4 3 113.84

223289W 144 2 4 124.17

BACKWATER VALVES

The chart below outlines the nominal diameter of sewer pipe required for the Canplas Backwater Valve Sleeve Kits:

Backwater Valve Hub Size

Sewer PipeDiameter

1½” 4”

2” 4”

3” 6”

4” 8”

6” 10”






EACH


out of this?What’s keeping this...

Backwater Valve

A

To home drain connections

Sewer and/or stormwater drain

During a backflow, the flapper seals closed, stopping the flow from reaching interior drains entering the living space.

From Sewer

To Home

Built-indrainageslope

To SewerFrom Home

Under Normal Operation, the lightweight flapper opens and allows waste water to exit to sewer line.

These simple devices offer effective protection against the backflow of sewage and stormwater

into homes and businesses.

Backwater Valves

New! DWV pipe can now be solvent welded to the lids of the 3” and 4” backwater valves to serve as an extention handle for easier access to the plug.






EACH


out of this?BACKWATER VALVESContinued

BACKWATER VALVE SLEEVE KIT for use with sewer pipe (Standard, DR35 or DR28)

ABS

123303 1080 15 For3”BWV 42.75

123304 480 10 For4”BWV 64.75PVC

223303W 1080 15 For3”BWV 34.17

223304W 480 10 For4”BWV 51.74PVC BWV Sleeve Kit with cast iron lid

223303WC 1080 15 For3”BWV 37.41

90° BACKWATER VALVE with plug cleanout - Spg x Cleanout x H

ABS

123293 270 15 For3”BWV 207.22

90° BACKWATER VALVE with trap & plug cleanout- Spg x Cleanout x H

ABS

123293A 108 6 For3”BWV 310.84

REPLACEMENT FLAPPERS FOR BACKWATER VALVESComes complete with O-ring

Flapper with Gasket and Retaining Ring

123281-2A 16000 500 1½ & 2 47.94Flapper with O-Ring

123283-2A 12960 90 3 10.35

123284-2A 6480 90 4 12.97

123286-2A - 25 6 49.21

BACKWATER COMPONENTSBACKWATER VALVE COMPONENTS

Flapper (ABS) with Gasket & Retaining Ring

123281-2A 16000 500 1½ & 2 47.94

Flapper (PVC) with Gasket & Retaining Ring

223281-2WA - 500 1½ & 2 38.28

Cleanout Lid (ABS - Black) with O-ring

123281-3A - 0 1½ & 2 22.03

Cleanout Lid (PVC - White) with O-ring

223281-3WA - 125 1½ & 2 17.61

O-ring for Cleanout Lid

123281-4 - 1 1½ & 2 1.93

Lid for Sewer Pipe†† (Black) 4” pipe diameter

123302-2 - 100 1½ & 2 15.41

Lid for Sewer Pipe†† (White) 4” pipe diameter

223302-2W - 30 1½ & 2 12.33

Flapper with O-ring

123283-2A 12960 90 3 10.35

O-ring for Flapper

123283-5 - 1 3 2.47


123283-3A 1600 50 3 18.14


223283-3WA - 50 3 19.66


123283-4 - 1 3 2.84

Access Sleeve‡‡ with 5” pipe diameter

123287-3 - 94 3 72.53

Sleeve Lid‡‡ with 5” pipe diameter

123287-2 - 1 3 19.43

Lid for Sewer Pipe†† (Black) with 6” pipe diameter

123303-2 - 0 3 19.43

Lid for Sewer Pipe†† (White) with 6” pipe diameter

223303-2W - 20 3 15.53

Flapper with O-ring

123284-2A 6480 90 4 12.97


123284-3A 1120 35 4 28.24


223284-3WA - 35 4 22.57

Access Sleeve‡‡ with 7” pipe diameter

123285-3 - 44 4 85.47

††SewerPipereferencedaboveisStandardSDR35.‡‡Canplasaccesssleevesandsleevelidsrequireaspecialdiameterpipe;theywillnotworkwithStandardSDR35pipe.

LID FOR SEWER PIPE ACCESS SLEEVESABS (black)

123302-2 - 100 1½or2 15.41

123303-2 - 0 3 19.43

123304-2 - 0 4 27.23PVC (white)

223302-2W - 30 1½or2 12.33

223303-2W - 20 3 15.53

223304-2W - 20 4 21.74

223286-6W - 15 6 62.11






EACH


COVER KITOverflow Cover Kit - Chrome Plated

332804-KIT - 200 - 10.89Overflow Cover Kit - Chrome Plated- Brush Nickel

332804-KITBN - 200 - 18.51Overflow Cover Kit - Chrome Plated- Oil Rubbed Bronze

332804-KITORB - 200 - 18.54

††SewerPipereferencedaboveisStandardSDR35.‡‡Canplasaccesssleevesandsleevelidsrequireaspecialdiameterpipe;theywillnotworkwithStandardSDR35pipe.

BACKWATER COMPONENTSContinued

BACKWATER VALVE COMPONENTSSleeve Lid‡‡ with 7” pipe diameter

123285-2 - 1 4 22.94

Lid for Sewer Pipe†† (Black) 8” pipe diameter

123304-2 - 0 4 27.23

Lid for Sewer Pipe†† (White) 8” pipe diameter

223304-2W - 20 4 21.74

Flapper with O-ring

123286-2A - 25 6 49.21


123286-3A 480 10 6 90.65


223286-3WA - 10 6 72.44

BWV Lid (PVC - White)

223286-3W - 1 25.99


123286-4 - 1 6 16.84

Lid for Sewer Pipe†† (White) with 10” pipe diameter

223286-6W - 15 6 62.11

WASTE & OVERFLOW INDIRECT

IndirectBottomIndirectRear OutletConfigurationOutletConfiguration

ABS GREAT WHITE® INDIRECT KITPlug & Chain (Chrome Trim) without Pipe

332804 800 25 1½ 39.12Lift & Turn (Chrome Trim) without Pipe

332806 800 25 1½ 60.54Pop Up (Chrome Trim) without Pipe

332808 800 25 1½ 45.52

WASTE & OVERFLOW - INDIRECTContinuedPVC (GREY) GREAT WHITE® INDIRECT KIT

Plug & Chain (Chrome Trim) without Pipe



322808 800 25 1½ 74.60

REPLACEMENT COMPONENTS & SPECIALTY FINISHES FOR GREAT WHITE® WASTE & OVERFLOW

POP-UPChrome Pop-up without Strainer

332807-9 - 200 FineThread 16.90Chrome Pop-up with Strainer

332807-8 - 60 FineThread 25.36Brush Nickel Pop-up with Strainer

332807-8BN - 60 FineThread 28.57Oil Rubbed Bronze Pop-up with Strainer

332807-8ORB - 60 FineThread 28.97

LIFT-N-TURNLift-n-Turn (Chrome Plated with Strainer)

332805-8 - 60 FineThread 47.51Lift-n-Turn (Brush Nickel with Strainer)

332805-8BN - 60 FineThread 37.99Lift-n-Turn (Oil Rubbed Bronze with Strainer)

332805-8ORB - 60 FineThread 37.99






EACH


IndirectRearOutletConfiguration

DirectConfiguration

IndirectConfiguration

3-in-1 Convertible Bath Waste & Overflow KitsOne kit will make three different drain outlet configurations!

ABS (BLACK) - GREAT WHITE® CONVERTIBLE KIT - WITH PIPEPlug & Chain (Chrome Trim) with Pipe

332903R 480 15 1½ 59.54Lift & Turn (Chrome Trim) with Pipe

332905R 480 15 1½ 57.14Pop Up (Chrome Trim) with Pipe

332907R 480 15 1½ 67.54

ABS (BLACK) - GREAT WHITE® CONVERTIBLE KIT

ABS (BLACK) - GREAT WHITE® CONVERTIBLE KIT - WITHOUT PIPEPlug & Chain (Chrome Trim) without Pipe



332908 800 25 1½ 51.08

PVC (GREY) GREAT WHITE® CONVERTIBLE KIT - WITHOUT PIPEPlug & Chain (Chrome Trim) without Pipe



322908 800 25 1½ 73.32

Joint rotates 10˚ degrees in any direction to adjust to tub wall angle.

No screws or metal plates, simply tighten faceplate retainer by hand to secure.

ABS (BLACK) Plug&Chain(ChromeTrim)withoutPipe

333854 600 25 1½ 42.91Lift&Turn(ChromeTrim)withoutPipe

333856 600 25 1½ 55.29PopUp(ChromeTrim)withoutPipe

333858 600 25 1½ 51.08

PVC (GREY) Plug&Chain(ChromeTrim)withoutPipe

323854 600 25 1½ 61.25Lift&Turn(ChromeTrim)withoutPipe

323856 600 25 1½ 67.99PopUp(ChromeTrim)withoutPipe

323858 600 25 1½ 73.32

NEW! ADJUSTABLE WASTE & OVERFLOW 3-IN-1 CONVERTIBLE KITS. One kit will make three different drain outlet configurations!

Lift&Turn,

Pop Up,Plug & Chain

3 Trim Options






EACH


1-1/2” SINK TAILPIECE 22 Gauge Rough Brass

333241 - 25 3 8.96

333242 - 25 4 9.61

333244 - 25 6 12.69

333246 - 24 10 12.49

333247 - 20 12 19.37

Kitincludestrimhardware,waste&overflowelbows(lesspipe&tee)

PLEASE NOTE: WASTE & OVERFLOW HALF-KITS INCLUDE COARSE THREAD TRIM HARDWARE WHICH ARE NOT INTERCHANGEABLE WITH GREAT WHITE® WASTE & OVERFLOW FINE THREAD HARDWARE

TRIM FINISH LEGEND

CP ChromePlatedORB OilRubbedBronzeBN BrushedNickel

WASTE & OVERFLOWHALF-KITSABS WASTE & OVERFLOW HALF-KIT - Lift & Turn (coarse thread)

ABS (Chrome Lift-n-Turn Hardware)

332925LCP - 25 1½ 25.01ABS (Brush Nickel Trim Hardware)

332925BN - 25 1½ 92.61

TUBULAR BRASS

C

1-1/2” DISHWASHER TAILPIECE (ROUGH BRASS) - Direct Connect

22 Gauge - Branch: Hose Thread

333325 - 100 6 27.9122 Gauge - Branch: 1/2” Hose Clamp

333330 - 100 6 24.26HoseThread

HoseClamp

DOUBLE SLIP REPAIR CONNECTORBrass with nuts and washers

333980 - 25 1¼"Chrome 24.20

THREADED TUBE TOE1 1/2” Threaded Tube (TOE), 20 Gauge, Rough Brass

333397 - 100 8 17.77

333399 - 60 12 22.88






EACH


TUBULAR BRASS WASTE CONNECTORSSlip Joint x MIPT, Brass

333991 - 72 1¼ x 1½ 18.09

333992 - 72 1½ x 1½ 30.94

1-1/4” P.O. PLUG 2-PIECE with Plug and Chain, Black ABS with Stainless Steel Flange

334002 - 50 1¼ x 8 14.73

1-1/4” P.O. PLUG with Cast Brass Grid Strainer, 17 Gauge Tailpiece

Chrome Plated

334009 - 25 1¼ 59.60

1-1/4” P.O. PLUG with Cast Brass Grid Strainer and Elbow, 17 Gauge Tailpiece, for Wheelchair Lavs

Chrome Plated

334011 - 20 1¼ x 6 108.41

P.O. PLUGS

C

C






EACH


P/L 11113811ABC 0.223 50662671102961 8113811BBC 0.221 50662671102978 8113812ABC 0.29 50662671102985 8113812BBC 0.27 50662671102992 8113813ABC 0.62 60662671103002 8113813BBC 0.637 60662671103019 8113814ABC 1.676 50662671103333 8

P/L 12123271 0.726 10662671120370 9123272 0.87 10662671120387 9123281 0.234 10662671120011 9123281-2A 0.021 10662671120400 11123281-3A 0.096 90662671120611 11123281-4 0.033 00662671120625 11123282 0.253 10662671120028 9123283 0.626 10662671120035 9123283-2A 0.029 10662671120417 11123283-3A 0.14 10662671120608 11123283-4 0.005 00662671120632 11123283-5 0.003 00662671120694 11123284 1.129 10662671120066 9123284-2A 0.052 10662671120424 11123284-3A 0.257 10662671120592 11123285 2.526 10662671120097 9123285-2 0.16 10662671120523 9123285-3 1.202 10662671120530 11123286 3.064 10662671120196 9123286-2A 0.216 10662671120431 11123286-3A 0.659 10662671120653 12123286-4 0.009 00662671120663 12123287 1.395 10662671120103 9123287-2 0.087 10662671120332 9123287-3 0.683 10662671065893 11123293 0.74 10662671120110 11123293A 1.633 10662671120127 11123293D 0.646 10662671120141 9123302 0.262 10662671120363 9123302-2 0.048 10662671120394 11123303 0.218 10662671120349 11123303-2 0.113 90662671120680 11123304 0.432 10662671120356 11123304-2 0.208 90662671120673 11

P/L13133070GN 0.238 10662671130232 4133070W 0.134 10662671130249 4133608 0.370 10662671130027 4 13112011 0.139 10662671117158 313212011 0.157 10662671214185 3

P/L 21213811ABC 0.305 30662671202469 8213811BBC 0.305 30662671202476 8213812ABC 0.364 30662671201820 8213812BBC 0.37 30662671201837 8213813ABC 0.871 30662671201844 8213813BBC 0.875 30662671201851 8213814ABC 2.325 30662671202261 8

P/L 22223271W 1.072 10662671220223 9223272W 0.926 10662671220230 9223281-2WA 0.027 10662671220278 11223281-3WA 0.12 10662671220384 11223281 0.322 10662671220308 9223281W 0.322 10662671220018 9223282 0.332 10662671220315 9223282W 0.325 10662671220025 9223283-3WA 0.186 10662671220391 11223283 0.799 10662671220339 9223283W 0.815 10662671220032 9223284-3WA 0.38 10662671220407 11223284 1.567 10662671220346 9223284W 1.585 10662671220056 9223285 3.053 10662671220322 9223285W

2.952 10662671220070 9

223286-3WA

0.91 10662671220377 12

PART NO. WEIGHT(KGS.)

CARTONBAR CODE

LOCATION IN PRICE LIST

NUMERIC AL INDEX


CARTONBAR CODE


223286-3W 0.901 10662671012620 12223286-6W 0.761 10662671220155 11223286W 4.149 10662671220162 9223287 1.574 10662671220360 9223287W 1.588

10662671220094

9

223288W 3.125

10662671220117

9223289W 1.758

10662671220124

9

223290W 1.698

10662671220179

9223291W 0.932

10662671220186

9

223302-2W 0.064

10662671220414

11223302W 0.343

10662671220216

9

223303-2W 0.156

10662671220261

11223303W 0.31

10662671220193

11

223303WC 1.241

10662671220506

11223304-2W 0.295

10662671220247

11

223304W 0.589

10662671220209

11

P/L 32321842 0.018 10662671320367 7321842W 0.019 10662671320268 7321843 0.03 10662671320374 7321843W 0.03 10662671320206 7321844 0.062 10662671320381 7321844W 0.065 10662671320213 7321957WSS 0.45 10662671320671 6321982WSS 0.3 10662671320794 6322041W 0.244 10662671320121 5322041WSS 0.26 10662671320152 5322042W 0.244 10662671320251 5322042WSS 0.26 10662671320190 5322143W 0.349 10662671320060 6322143WC 0.306 10662671320107 6322144W 0.566 10662671320077 6322144WC 0.534 10662671320114 6322155W 0.268 10662671320732 7322241WSS 0.498 10662671320411 5 322241W 0.481 10662671320220 5322242W 0.492 10662671320237 5322242WSS 0.508 10662671320244 5322341WSS 0.514 10662671320527 5322342WSS 0.524 10662671320626 5322542W 0.291 10662671320442 5322804 0.475 10662671320534 12322806 0.505 10662671320541 12322808 0.5 10662671320565 12322904 0.5 10662671320565 13322906 0.511 10662671320299 13322908 0.506 10662671320305 13323854 0.509 10662671068634 13323856 0.539 10662671068641 13323858 0.534 10662671068658 13

P/L 33331942-2SS 0.055 10662671330786 6331942-2BN 0.058 10662671333497 6331942-2ORB 0.058 10662671333503 6331943-2BN 0.078 10662671333510 6331943-2ORB 0.082 10662671333527 6331943-2SS 0.071 10662671330809 6331952SS 0.528 00662671330864 6331957SS 0.331 10662671330878 6331962SS 0.289 10662671330908 6331982SS 0.239 10662671330991 6332041 0.212 10662671330137 5332041SS 0.229 10662671330205 5332042 0.212 10662671330175 5332042SS 0.229 10662671330755 5332143 0.292 10662671330052 6332143C 0.309 10662671330090 6332144 0.481 10662671330069 6332144C 0.435 10662671330106 6332144T 0.501 10662671330083 6332155 0.21 10662671330939 7332158 0.712 10662671330922 7332241 0.386 10662671330342 5332241SS 0.403 10662671330168 5332242 0.39 10662671330359 5






EACH


332242SS 0.407 10662671330366 5332341SS 0.419 10662671330571 5332342SS 0.423 10662671330533 5332542 0.238 10662671330458 5332542SS 0.254 10662671330465 5332804 0.4 10662671330120 12332804-KIT 0.065 10662671333374 12332804-KITBN 0.029 10662671333404 12332804-KITORB 0.026 10662671333466 12332805-8 0.13 10662671330762 12332805-8BN 0.125 10662671333381 12 332805-8ORB 0.128 10662671333473332806 0.43 10662671330229 12332807-9 0.041 10662671330854 12332807-8ORB 0.125 10662671018769 12332807-8BN 0.125 10662671333435 12332807-8ORB 0.125 10662671018769 12332808 0.425 10662671330595 12332903R 0.621 10662671330687 13332904 0.406 10662671330274 14332905R 0.651 10662671330700 13332906 0.436 10662671330281 14332907R 0.646 10662671330731 13332908 0.431 10662671330298 14332925BN 0.489 10662671331325 14332925LCP 0.488 10662671333039 14333054BR 0.296 10662671331004 7333056BR 0.273 10662671331103 7333064BR 0.322 10662671331127 7333068BR 0.626 10662671333442 7333241 0.05 10662671331486 14333242 0.068 10662671331493 14333244 0.096 10662671331509 14333246 0.157 10662671331523 14333247 0.188 10662671331530 14333325 0.17 10662671331615 14333330 0.147 10662671331653 14333397 0.164 10662671332148 14333399 0.246 10662671332162 14333804-8 0.02 10662671068597 14333854 0.455 10662671068603 13333856 0.485 10662671068610 13333858 0.48 10662671068627 13333980 0.134 10662671332360 14333991 0.164 10662671332391 15333992 0.171 10662671332407 15334002 0.13 10662671332797 15334009 0.286 10662671332841 15334011 0.63 10662671332865 15

P/L 39394708 1.66 10662671052701 7394709A 0.941 10662671052916 7394709B 1.006 10662671052923 7394709C 1.006 10662671052930 7394712A 1.705 10662671052961 7394712B 1.705 10662671052497 7394712C 1.705 10662671052503 7394712-4 0.091 10662671052954 7394713 2.079 10662671052978 7394718 1.901 10662671052992 7


CARTONBAR CODE


NUMERIC AL INDEX


CARTONBAR CODE







EACH


NOTES






EACH


PLUMBING SUNDRIES

www.canplasplumbing.com1-800-461-5300

Head Office, Manufacturing Locationand Customer Service Centre500VETERANSDRIVE,BOX1800BARRIE,ONL4M4V3CANADATELEPHONE: (705)726-3361FAX: (705)726-2186EMAIL: [email protected]

Customer Service Centreand Sales Office9489-200STREET,UNIT201LANGLEY,B.C.V1M3A7CANADA

TELEPHONE: (604)455-0432FAX: (604)455-0452

Customer Service Centreand Sales Office11408-163rdSTREETEDMONTON, AB T5M 3T3CANADA

TELEPHONE: (780)451-3206FAX: (780)452-0536

PLUMBING SUNDRIES - Canplas...PLUMBING SUNDRIES PRICE LIST CPS-0219 FEBRUARY 1, 2019 - 2 - TABLE OF...

Documents

Transcript of PLUMBING SUNDRIES - Canplas...PLUMBING SUNDRIES PRICE LIST CPS-0219 FEBRUARY 1, 2019 - 2 - TABLE OF...