Plenary Lectures of EMC and Pb-Zn Conference 2015 with ... · Plenary Lectures of EMC and Pb-Zn...

Plenary Lectures of EMC and Pb-Zn Conference 2015 with General Interest for all Conference Participants

European Metallurgical Conference 2015 & Lead-Zinc 2015

Monday, June 15, 2015; 9.00 am

Prof. Dr. Walter Frenz, RWTH Aachen, Lehr-und Forschungsgebiet Berg-, Umwelt- und Europarecht, Germany

Information exchange in committees and conferences – infringements of competition

law?

Monday, June 15, 2015; 9.30 am

Professor Dr. Dr. h.c. Markus A. Reuter, Outotec Oyj, Finland

Lead and Zinc: Crucial Carrier Metals for a Sustainable Society

Monday, June 15, 2015; 10.00 am

Nick Hazen, Hazen Research, Inc., USA

A Discussion of Effective Process Development

Tuesday, June 16, 2015; 8.30 am

Dr. Frank E. Goodwin, International Zinc Association, Belgium

The Zinc Industry: New Developments


Professor Dr.-Ing. Kaixi Jiang, BGRIMM – Beijing General Research Institute of Mining & Metallurgy

The Process Improvement Researches for Zinc Hydrometallurgy


Huw Roberts, CHR Metals Limited, United Kingdom

Changing dynamics of long-term zinc and lead supplies


Volker Spieth, VS. Globalmetal LLC, USA

Copper-Silver-Gold Deposits: Germany`s World-Class Potential in the 21. Century

Plenary Lectures of EMC and Pb-Zn Conference 2015 with General Interest for all Conference Participants


Wednesday, June 17, 2015; 8.30 am

Bush, Andy; International Lead Association, England

The Sustainability Credentials of Lead


B. Eng. Takashi Yoshida, Hikoshima Smelting Company, Japan

The Advance of Zinc Industry in Japan – The History and the Future from the Point of

View of Mitsui Mining and Smelting Company


Professor Paul B. Queneau, Colorado School of Mines, USA

Recycling Lead and Zinc in the United States


Dr. Matthias Simon, Gesamtverband der Deutschen Buntmetallindustrie e.V., Germany

The Economic Situation of the German Non-Ferrous Metal Industry – Non Ferrous

Metals focused by the World of Finance

EMC/Pb-Zn 2015 – List of Papers in Sessions as of June 11 The authors printed in bold are expected to present the paper.

Authors marked with a * are candidates for the Young Scientist’s Paper Award.

The Organizing Committee has the right to change the course of the programme, especially the sequence of presentation

of papers according to the necessities, misprints and errors are reserved.


Monday, June 15, 11:00 Session

Recycling / Waste

General Pyrometallurgy

Copper

Chair ŚMIESZEK, Z. WENZL, C. FILZWIESER, A. Room 1 2 3

11:00 Benedek, Laura; Montanuniversität Leoben, Lehrstuhl für Nichteisen-metallurgie, Austria

Challenges Regarding

Recycling of REEs from

Permanent magnets in a

WEEE-fraction

Bellemans, Inge *; Verbeken,

Kim; Ghent University, Department of Materials Science and Engineering, Belgium; Moelans, Nele; KU Leuven, Department of Materials Engineering, Belgium

Modelling the Mechanical

Entrainment of Metal

Droplets by Solid Particles in

Liquid Slags

De Wilde, Evelien * et al.;

Ghent University, Department of Materials Science and Engineering, Belgium

Wetting Behaviour of Spinel

with Copper to Understand

Metallic Copper Losses to

Slags

11:25 Diaz, Fabian; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany

High Efficiency Recycling

route of WEEE

Chen, Liugang * et al.; KU Leuven, Department of Materials Engineering, Belgium

Effect of ZnO on the

Reaction between MgO and

Fe-Saturated ZnO-

Containing Fayalite Slags

Haga, Kazutoshi et al.; Akita University, Graduate School of Engineering and Resource Science, Japan

Selective Removal of Arsenic

from Enargite and

Tennantite/Tetrahedrite by

Roasting Process

11:50 Sorger, Christoph et al. Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria

Effects of Pyrolysis on the

Metallurgical Processing of

Waste Electrical and

Electronic Equipment

Degel, Rolf et al.; SMS Siemag AG, Germany

History and new Milestones

in Submerged Arc Furnace

Technology for Ferro Alloy

and Silicon Production

Hamuyuni, Joseph; Taskinen,

Pekka; Aalto University, School of Chemical Technology, Finland

The Liquidus in Cu-O-Al2O3

Ternary System at 1175 and

1200 °C

12:15 Zöhrer, Marlis; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria

Treatment of Industrial

Waste

Friedmann, David *; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany

Pyrometallurgical Extraction

of Valuable Metals from

Polymetallic Deap-Sea

Nodules of the German

Licensed Territory

Dianbang, Shen et al.;

Dongying Fangyuan Nonferrous Metals Co., Ltd., China

Commercialization and

Study on the Mechanisms of

Bottom Blowing Copper

Smelting Process







Lead Downstream Processing and Applications

Aluminium

Process Control

Zinc Recovery from EAF Dust Treatment

Chair BÖTTCHER, B. SCHARF-BERGMANN, R. GREGUREK, D. ANTREKOWITSCH, J. Room 7 15 16 17

11:00 Hesterberg, Treávis; Ellis,

Timothy W.; Prengaman,

David; RSR Technologies Inc., USA

Future Requirements for

Lead Based Materials in the

Battery Industry

Fiorese, Elena *; Bonollo,

Franco; University of Padova, Department of Management and Engineering, Italy

Process Parameters Affecting

Quality of High-Pressure Die-

Cast Al-Si Alloy

Aula, Matti; Fabritius, Timo;

University of Oulu, Finland; Pisilä, Sauli; Outotec Finland Oy, Finland

On-Line Analysis of Process

Conditions in Ilmenite

Smelting with Optical

Emission Spectrometry

Fujioka, K.; Hatae, S.; Miike Smelting Company Limited, Japan

EAF Dust and Secondary Fly

Ash Treatment by MF

Process at Miike Smelter

11:25 Wycklendt, Brian K.; Johnson Controls, USA; Toubartz,

Frank; Johnson Controls Recycling GmbH,Germany

The Need for the Sustainable

and Responsible Recycling of

Lead

Kremmer, Thomas;

Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria

Impact of Microstructural

Characteristics on the

Corrosion Morphology of

High-Strength Brazing

Sheets (Aluminium)

Dutta, Abhishek;Beyers,

Lesley J. et al.; KU Leuven, Department of Materials Engineering, Belgium

Hybrid Artificial Neural

Network and Genetic

Algorithm Modelling of Slag

Properties

Geier, Bernhard *;

Raupenstrauch, Harald; Montanuniversitaet Leoben, Department of Environmental and Energy, Austria; Pilz,

Karl; voestalpine Stahl GmbH, Austria Crude Zinc Oxide Production

from Steel Mill Dusts with

the RecoDust Process

11:50

Hardy, David; PENOX SA, Germany

European Lead Oxide

Market – Market Trends and

Changes in Applications with

a View on Consequences for

the Production and Process

Technology

Smetan, Herbert; SMETAN engineering GmbH, Germany

Materials and Processing

Methods to Improve the

Properties of Aluminium

Alloy Cylinder Heads

Schüdde, Jens; Mohsler, S.; Storch, H.; Outotec GmbH, Germany

Maximizing Power

Generation from

Metallurgical Sulphuric Acid

Plants

Heegaard, Bror; ScanArc Plasma Technologies AB, Sweden

Submerged Plasma

Technology and Works

within Zn/Pb Recovery

12:15 Ma, Baozhong; Wang, Haibei

et al.; Beijing General Research Institute of Mining & Metallurgy, China

The Research and

Engineering Practice of the

Lead Oxygen-enriched Flash

Smelting

Werinos, Marion; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria

Influence of Alloy Production

History on Natural Aging of

AA6061 Modified with Sn

Griffiths, Derek; Scantech, Australia

Application of on Belt

Elemental Analysis using

PGNAA on Pb, Zn Ores for

Improved Plant Performance

and Process Control

Karasawa, Seiichi; Numata,

Kenji; Toho Zinc Co., Ltd, Onahama Refinery, Japan

Improvements of the

Production Process of Zinc

Oxide from Electric Arc

Furnace Dust







Recycling / Waste

General Pyrometallurgy

Copper

Chair FORSÉN, O. SCHWAB, B. PESL, J. Room 1 2 3

14:10 Coleman, Mark E.; Schenck Process UK Ltd, UK

Recycling of Process

Arising's in Furnaces Using

Pneumatic Injected Feed

Jak, Eugene; The University of Queensland, Australia

Recent Advances in Research

for Non-ferrous Smelting and

Recycling

Stelter, Michael et al.; TU Bergakademie Freiberg, Institut für NE-Metallurgie und Reinststoffe, Germany

A New Electrolyte for

Copper Electrorefining?

14:35 Prajsnar, Ryszard; Czernecki,

Józef; Institute of Non-ferrous Metals, Poland

Recovery of Zinc, Lead and

Copper from Waste Multi-

Phase Slags in Oxidation-

Reduction Smelting Process

in the Pilot TSL Furnace

Kruse, Stephanie; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany

Recovery of Rare Earth

Elements from NdFeB Based

Grinding Slurries

Hutabarat, Imelda;


Charactarisation and

Thermal Behaviour of

Indonesian Copper Sulphides

for Leaching Process

15:00 Preiß, Thorsten; Aurubis AG, Germany; Strobel, Dietrich; Brauer, Ingmar; TEWS Elektronik GmbH & Co. KG, Germany

Time-Saving Moisture

Measurement System at the

Aurubis Secondary Smelter

Michels, Daniel *; Kappes,

Horst; Paul Wurth S.A., Luxembourg

Dry Slag Granulation with

Energy Recovery: Operation

of Full Scale Pilot Plant

Hanusch, Bernhard; Lux,

Timm; Andritz MAERZ, Germany

MAERZ Direct-to-Wire®

Performing Results and New

Developments

15:25 Rao, Y. K.; University of Washington, USA

Chemical Vapour Deposition

of Fe2O3(s): Fe-O-Cl-Te

System

Hassan-Pour, Siran; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany

Optinization of Processing

Cu-Cr Alloys via

Aluminothermic Reduction







Aspects of Modern Zinc Production Technologies

Aluminium

Zinc Electrowinning


Chair GRUND, S. BRUCH, K. H. HENRY, P. VON BILLERBECK, E. Room 7 15 16 17

14:10 Dorner, Ulrike; German Mineral Resources, Federal Institut for Geosciences and Natural Resources, Germany

Evaluating Supply and

Demand Trends in the Zinc

Market

Davris, Panagiotis * et al.;

School of Mining and Metallurgical Engineering, Laboratory of Metallurgy, Greece

Leaching of Bauxite Residue

Using Task Specific Ionic

Liquid HbetTf2N

Hamilton, Ernie; Brochot Group, France

Contacts, Current, Kilowatts,

Corrosion, and Coating – The

Factors Influencing Selection

of the Optimum Zinc Plant

Cathode

Komori, Shintaro et al.;

Shisaka Smelting Co., LTD., Japan

Recovering Crude Zinc

Oxide from EAF Dust at

Shisaka Smelting Co., LTD

14:35 Sugawara, Akiya; Hachinohe Smelting Company Limited, Japan

Zinc and Lead Smelting at

Hachinohe Smelter

Doppler, Thomas; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria

Optimisation of the Recycling

Process for Aluminium

Scraps with High Impurities

Mahon, Michael; Alfantazi,

Akram; University of British Columbia, Canada

Seasonal Effects on the

Water Balance in a Zinc

Electrowinning Cell House

Maccagni, Massimo; Nielsen,

J.; Engitec Technologies USA, USA

The INDUTEC® Process:

How Converting a Waste in

Saleable Products

15:00 Shimizu, Yuji; Yamaguchi,

Takuhiro; Minami, Hiroyuki; Toho Zinc Co.,LTD, Annaka Refinery, Japan

Improvement of Zinc

Electrolytic Process

Kadenkin, Alexander; Feierabend, Angelika; Bohling, Christian; SECOPTA GmbH, Germany

Laser Induced Breakdown

Spectroscopy (LIBS) for

Analysis and Sorting of

Aluminium Alloys

Nakano, Hiroaki et al.;

Kyushu University, Faculty of Engineering,Department of Materials Science and Engineering, Japan

Synergistic Effect of Gelatin

and Sb on the Deposition

Behavior and Texture of Zn

from Electrowinning

Nagasaka, T.; Chairaksa-

Fujimoto, Romchat; Tohoku University, Department of Metallurgy, Graduate School of Engineering, Japan

New Approach to Recover

Metallic Zinc from EAF Dust

by CaO Treatment

15:25 Wang, Haibei;Wang,

Rongshen et al; Beijing General Research Institute of Mining and Metallurgy, Mineral processing department, China

The Mineral Processing

Study for a Cu-Pb-Zinc Ore

with Carbon

Maccagni, Massimo; Engitec Technologies S.p.A., Italy; Nielsen, J.; Engitec Technologies USA, USA

Latest Developments in STE

Process: Engitec’s Secondary

Aluminium Salt Slag

Treatment

Shibata, Etsur, Nakamura,

Takashi, Sylwia Oleszek et al.;

Tohoku University, Institute of Multidisciplinary Research for Advanced Materials (IMRAM), Japan

Recycling of EAF Dusts with

Waste Plastics







Recycling / Waste

General Pyrometallurgy / Copper

Copper

Chair PREIß, T. FRIEDRICH, B. KUHN, H-A. Room 1 2 3

16:20 Radwitz, Sebastian; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany

Influencing the Electroslag

Remelting Process by

Varying fluorine Content of

the Utilized Slag

Riedl, Elke; Brandes, Peter; Schütz, Denis; Anton Paar GmbH, Austria

Rheological Behavior of

Alloys and Metals Melts

Okura, Takahiko; Toi,

Ryutaro; Tokoro, Chiharu; Waseda University, Department of Earth, Resources and Environmental Science and Engineering, Japan

Crystallization of Magnetite

Particles in Cooper Smelting

Slag by Slow Cooling for

Recovery of Useful Metals by

Physical Separation

16:45 Bernardes, Andréa Moura; Borsa, Maria Beatriz; Pérez

Bergmann, Carlos; Universidade Federal do Rio Grande do Sul, Brazil

The Effect of Operating

Parameters on the

Electrocoagulation-flotation

of a Graphitic Forging

Effluent

So, Lily Lai Chi; Faucher,

Santiago et al.; Hatch Ltd., Canada

Recent Developments in

Commercial Scale Dry Slag

Granulation and Heat

Recovery

Steinacker, Stephan;


Recycling of Residues from

the Copper Industry

17:10 Stuhlpfarrer, Philipp; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria

Recycling of Nd2Fe14B

Magnets

Maruyama, Toru; et al.;

Kansai University, Department of Chemistry and Materials Engineering, Japan

Effect of Alloying Elements

on Monotectic Composition

of Lead Free Bronze with

Dispersed Sulfide Particles

Saltykov, Pavel; Strecker, Jörg

J. F. et al.; Engineering Dobersek GmbH, Germany

Design & Construction of a

Copper Plant Based on

Modern & Enviromental-

Friendly Processes

17:35

Baumbach, Juliane; Bombach,

Hartmut; Stelter, Michael; TU Bergakademie Freiberg, Institut für NE-Metallurgie und, Germany

Investigations of the

Behaviour of Thiourea and

Alternative Additives in

Copper Electrorefining







Aspects of Modern Zinc Production Technologies

Aluminium Zinc Electrowinning


Chair NYBERG, J. SCHMITZ, D. GEENEN, C. RÜTTEN, J. Room 7 15 16 17

16:20 Coveney, James; Wood, Jacob et al.; Outotec Pty Ltd, Australia

The Outotec® Direct Zinc

Smelting Process

Pirker, Armin; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria

Recycling of Aluminium

Scrap via Salt Process

Mohammadi, Maysam;

Mahon, Michael; Alfantazi,

Akram; The University of British Columbia, Department of Materials Engineering, Canada

Electrodeposition of the

MnO2 Layer on Lead-Based

Anodes in the Zinc

Electrowinning Process

Rösler, Gernot;


Sustainable Recovery of

Heavy Metals from

Metallurgical Dusts – The

2SDR Process

16:45 Frias, Carlos et al.; Cobre Las Cruces S.A., Spain

Flotation and

Hydroprocessing of Bulk

Concentrates from Las

Cruces Mine

Schlögl, Carina; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria

Anodising of Recycling

Aluminium

Morimitsu, Masatsugu;

Zhang, T.; Ueda, M.; Doshisha University, Department of Environmental Systems Science, Japan

Amorphous Oxide Coated

Titanium Anode, MSA®, for

Energy-Efficient Zinc

Electrowinning without

Manganese Oxide Deposition

Ruh, Andreas; Kim, Dae-Soo; Befesa Steel Services GmbH

The Waelz Process –

Worldwide Most Used

Process for the Recycling of

Zinc Containing Residues

17:10 Ajibola, Olawale Olarewaju;

Oloruntoba, Daniel T.; Federal University of Technology, Metallurgical and Materials Engineering Dept, Nigeria; Owa, Adebayo Felix; Federal University Oye Ekiti, Materials and Metallurgical Engineering Dept., Nigeria

Leach-Electrowinning of

Zinc from Abakaliki

Complex Sulphide Ore

Brocchi, E. A. et al.; Pontifical Catholic University of Rio de Janeiro, Brazil

Chemical Processing of a

Glauconite Concentrate in

Order to Produce K2SO4 and

Al2O3

Takasaki, Yasushi et al.; Akita University, Japan

The Effect of the Current

Density Change on the Beta-

PbO2 Oxide Layer Formed

on the Pb-Ag Anode for Zinc

Electrowinning

Lahtinen, Marko; Saxén,

Björn; Outotec (Finland) Oy, Finland

Hydrometallurgical Zinc

Production from Fume

Oxides

17:35 Thoraval, Marion; RWTH

Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany

Metal Entrapment in Slag

During the Aluminium

Recycling Process in Tilting

Rotary Furnace

Stubbe, Gerald; VDEh-Betriebsforschungsinstitut GmbH, Germany; Hillmann,

Carsten; DK Recycling und Roheisen, Germany; Wolf, C.; VELCO Gesellschafft für Förder-, Spritz- und Siloanlagen mbH, Germany

Zinc and Iron Recovery from

Filter Dust by Melt Bath

Injection into an Induction

Furnace






Tuesday, June 16, 11:00 Session

Copper Zinc Concentrate Roasting and Leaching


Chair FILZWIESER, I. STELTER, M. N.N.. Room 3 6 7

11:00 Houngaloune, Sengpasith * et

al.; Hokkaido University, Division of Sustainable Resources Engineering, Japan

The Use of Schwertmannite

for Arsenic Immobilization in

Copper Flotation Tailings

Tamargo, Francisco; TAM 5 S.L., Spain; Bhatter, Sushil; Binani Zinc Limited, India

A New Process for the Full

Recovery of Zinc and Other

Valuable Metals from Zinc

Concentrates

Takayama, Tone; dos Santos,

Fabiano Mariel; Magalhães,

Walter; Votorantim Metais Zinco (VMZ), Brazil

Treatment of Secondary Raw

Materials at Juiz de Fora

Zinc Smelter in Brazil

11:25 Angerer, Thomas; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria

Development of a Lead-free

Brass Alloy

Yoshida, Takashi; Nishiyama,

Fumihiro et al.; Hikoshima Smelting Co. Ltd., Japan

Process Modification to

Increase the Amount of Fine

Concentrates by Wet Feed

Type Roaster in Hikoshima

Zinc Smelter

Mello Da Silva, Livia et al.;

Votorantim Metais Zinco, Brazil

Mineralogic Characterization

from the Waelz Circuit – Juiz

de Fora, Brazil

11:50 Leão, Versiane A. et al.;

Universidade Federal de Ouro Preto, Department of Metallurgical and Materials Engeng., Brazil

Column Bioleaching of

Secondary Copper Sulphides

with Extreme Thermophiles

Johto, Hannu; Boliden Harjavalta, Finland; Taskinen,

Pekka; Aalto University, Department of Material Science and Engineering, Finland; Metsärinta, Maija-

Leena; Outotec (Finland) Oy, Pori Research Center, Finland

Formation of Molten Sulfide

Phase in Systems Related to

Zinc Sulfide Roasting

Kozlov, P. et al.; JSC CZP Chelyabinsk Zinc Plant, Russia

Research and Development of

Technogenic Wastes

Recycling with Recovery of

Zinc, Lead and Tin

12:15 Maccagni, Massimo; Engitec Technologies S.p.A., Italy; Nielsen, J.; Engitec Technologies USA, USA

The ECUPREX® System:

Copper Recovery from Any

Different Copper Bearing

Materials

Takebe, Hiromichi; Okano,

Satosh; Okura, Takahiko; Ehime University, Graduate School of Science and Engineering, Japan

Effect of Transition Metal

Impurities on Phase and

Microstructure during the

Oxidizing Roasting of ZnS

Powder

Arnout, Sander; Nagels, Els; Serbruyns, An; InsPyro, Belgium

Reductive Power of Different

Carbon Materials







Minor Metals (Rare Earth, Indium, Refractory Metals)

By-product Treatment and Strategic Metals Recovery

Technologies

Lead Refining, Downstream Processing and Applications

HSE Practics

Chair HEINZE, V. KUNICKÝ, Z. GOOVAERTS, H. MARTENSSON, C. G. Room 15 16 17 18

11:00 Bourbos, Evangelos * et al.;

National Technical University of Athens, School of Mining and Metallurgical Engineering, Greece

Electrodeposition of

Lanthanum from Ionic

Liquids at Room

Temperature

Prajsnar, Ryszard;

Miczkowski, Zdzisław et al.;

Institute of Non-ferrous Metals, Poland

Recovery of Lead in Copper

Smelters of KGHM Polska

Miedź S.A.

Nishigaki, Koudai;

Nakagawara, N.; Ichiya, K.; Kosaka Smelting & Refining Co.,Ltd., Japan

Operational Improvements at

Kosaka Lead Refinery

Beran, Martin; Aurubis AG, Germany

Lead them, but don’t lead

them – Lead in analytics and

blood lead analytics at

Aurubis

11:25 Elwert, Tobias; Goldmann,

Daniel; Römer, Felix; TU Clausthal, Institute of Mineral and Waste Processing, Germany

Separation of Lanthanides

from NdFeB Magnets Using

Alkyl Phosphonic Acid PC-

88A

Pichler, Christoph;


Sustainable Ways to Recycle

Metallurgical Residues in the

21st Century

Hamamoto, Makoto et al.;

Mitsui Mining and Smelting CO., Ltd., Japan

The Optimization of

Takehara Lead Refinery

Operation

Lakemeyer, Margot; ArbMed, Germany

Metals – an Update on

Managing Occupational

Health Risks

11:50 Vogel, Hanno; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany

Development and Research

Trends of the Neodymium

Electrolysis – A Literature

Review

Lv, Jianfang et al.;

Northeastern University, School of Materials and Metallurgy, China

Feasibility Study on

Recycling Lead from Lead

Glass through Lead Smelting

Process

Nakashima, Kota; Usui,

Shojiro; Sasaoka, Hidetoshi; Hitachi Works, Technology Development Center, JX Nippon Mining & Metals Corporation, Japan

Electrolytic Refining of Lead

from Secondary Material

using a Sulfamate Electrolyte

Gilles, Mik et al.; International Cadmium Association (ICdA), Belgium

Practical Solutions for

Minimizing the Cd

Occupational Exposure Risk

in the Zinc/Cadmium

Industry

12:15 Voßenkaul, Daniel et al.; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany

Extraction of Rare Earth

Elememts from non-Chinese

Ion Adsorption Clays

Shima, Nobuhiro; Hashimoto,

Naoki; Kitano, Takayuki; Toho Zinc Co., Ltd., Chigirishima Refinery, Japan

Effect of Various Conditions

in the Lead Electrolytic

Process

Nowińska, Katarzyna;

Adamczyk, Zdzisław; Silesian University of Technology, Faculty of Mining and Geology, Poland

Mobility in Ground-Water

Envirnonment of ZnS

Contained in

Pyrometallurgical Zn-Pb

Dust







Copper

Zinc Concentrate Roasting and Leaching

Chair HANUSCH, B ZEIDLER, O. Room 3 6

14:10 Hellstén, Niko; Finland; Hamuyuni, Joseph; Taskinen,

Pekka; Aalto University, School of Chemical Technology, Finland

High-Temperature

Solubilities in the Cu-O-MgO

System at Metallic Copper

Saturation

Jung, Jochen; Keller,

Wolfgang; EKATO Rühr- und Mischtechnik GmbH, Germany

Process and Cost Optimized

Agitator Solutions for

Hydrometallurgical Base

Metals Processing

14:35 Vickress, Dustin;Jastrzebski,

Maciej et al.; Hatch Ltd., Canada

New Technology for the

Improvement of Flash

Furnace Smelting

Performance

Aromaa, Jari; Rusanen, Lauri; Forsén, Olof; Aalto University, Department of Materials Science, Finland

Deposition of Hematite from

Zinc Sulphate Solution

15:00 Kojo, Ilkka V.; Reuter, Markus

A.; Outotec Oyj, Finland

Primary Copper Smelting

Impact

Xu, Zhifeng; Lan, Yuanjun; Jiangxi University of Science and Technology, School of Metallurgical and Chemical Engineering, China; Jiang,

Kaixi; Beijing General Research Institute of Mining and Metallurgy, China

Pressure Leaching of

Marmatite Concentrate with

Lignite Coal as Elemental

Sulfur Disperser

15:25 Kolczyk, Ewa et al.; Institute of Non-Ferrous Metals, Poland

Numerical Modelling of

Cleaning Slag from a Process

of Converting CuPbFe Alloy

Safari, Mehdi et al.; University of Cape Town, Centre for Minerals Research, South Africa

The Effects of Present Ions in

Lead Sulfate Halide Leaching

from Zinc Leaching Plant

Residual Cake









Technologies

Lead Refining, Downstream Processing and Applications /

Lead Process Fundamentals,

Modelling and New Processes

HSE Practics / Aspects of Modern Primary Lead

Smelting Technologies

Chair ROMBACH, E. PLITZKO, C. KONGOLI, F. TSONEV, R. Room 15 16 17 18

14:10 Bartosinski, Marek; RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany

Separation of Semiconductor

Layers from Thin Film Solar

Panels Using Microwave

Radiation

Penchel JR, Sérgio de A. et al.;

Votorantim Metais Zinco, Brazil

Metals Recovery of Cements

– Juiz de Fora, Brazil

Stopić, Srećko; Träger,

Thomas; Friedrich, Bernd;

RWTH Aachen University, Institut für Metallurgische Prozesstechnik und Metallrecycling (IME), Germany

Lead Oxide Battery Grade

Synthesis via Formation and

Decomposition of Lead

Citrate

Buch, Stefan; BERZELIUS Metall GmbH, Germany

Current Situation and

Development of Regulatory

Activities

14:35 Ebner, Tamara; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria

Reuse of Metal Cutting Tools

by Wet Chemical Decoating

Bangs, Colton E. et al.;

Umicore Precious Metals Refining, Belgium

Outsourcing of Lead and Zinc

By-Product Treatment: A

Win-Win-Win Scenario

Maccagni, Massimo; Engitec Technologies S.p.A., Italy; Nielsen, J.; Engitec Technologies USA, USA; Hymer, T.; The Doe Run Company, USA

The FLUBOR® Process: Pilot

Tests Results

Alvear, Gerard; Burrows,

Alistair S.; Glencore Technology Pty Ltd, Australia; Azekenov, Turarbek; Zatayev,

R.; Kazzinc Ltd., Kazakhstan

Lead ISASMELTTM

Operations at Ust-

Kamenogorsk

15:00 Luidold, Stefan; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria

Challenges in the field of

extractive metallurgy

oftechnological metals

Mocellin, Julien et al.; Institut National de la Recherche Scientifique, Centre Eau Terre et Environnment, Canada

Hydrometallurgical Recovery

of Manganese, Zinc and Lead

from Pyrometallurgy Sludge


The Lead Acid Battery Paste

Electrowinning with the

FAST Pb Process

Chen, Shaolong et al.; Kumera Technology Center, Finland

Drying Blended Concentrates

by Kumera Steam Dryer for

Kivcet Lead Flash Smelting

15:25

Gregurek, Dean et al.; RHI AG; TC Leoben, Austria

Wear of Refractory Linings

in the Lead and Zinc Industry







Zinc Solvent Extraction / Zinc Downstream Processing,

Applications and Secondary

Smelting

Chair PICHLER, C. Room 6

16:20 Parra Sánchez, Raquel; Calvo

Catalan, Jaime; et al.; TECNICAS REUNIDAS, Spain

Zinc Calcine Treatment by

ZINCEXTM Solvent

Extraction Based Process

16:45 Oloruntoba, D.T.; Popoola, A

P I; Tshwane University of Technology, Department of Chemical, Metallurgical and Materials Engineering, South Africa

Zinc Phosphating for Safety

Enhancement of Carbon

Steels in Chloride

Environment

17:10 Schmitz, Daniel; Schauries,

Bodo; Metallwerk Dinslaken GmbH & Co KG, Germany

Multistage Removal of

Aluminium from Secondary

Zinc – a Challenge in Zinc

Recycling

17:35









Technologies

Lead Process Fundamentals, Modelling and New Processes

Aspects of Modern Primary Lead Smelting Technologies

Chair N.N.. TOUBARTZ, F. FISCHER, M. MEURER, U. Room 15 16 17 18

16:20 Rasenack, Kai; Goldmann,

Daniel; TU Clausthal, Institute of Mineral and Waste Processing, Germany

Recycling of Indium from

End-of-Life LCD's

Steinlechner, Stefan;

Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie; Austria

Recycling Potential of

Precious Metals Form Zinc,

Lead and Copper Containing

Residues

Marschall, Hans Ulrich; RHI AG Technology Center Leoben, Austria; Kreuzer, D.; Spanring, A.; RHI AG Industrial Division, Austria

Thermo Mechanical Analysis

of a Lead-Rotary Furnace

with Finite Element

Simulation

Kehaiov, Yavor;Tsonev,

Rumen et al.; KCM 2000 AD, Bulgaria

Modern Lead Smelting

Technologies: Modern Means

Resilient

16:45 Ratschbacher, Karin; Montanuniversität Leoben, Lehrstuhl für Nichteisenmetallurgie, Austria

Oxidation Kinetics of a

Molybdenum-Tantalum-

Alloy

Binz, Florian; Friedrich,

Bernd; RWTH Aachen University, IME Metallurgische Prozesstechnik und Metallrecycling, Germany

Development of Secondary

Antimony Oxides for the

Application in Plastic

Products

Moulin Silva, Wagner; Bruno

Augusto, Batista Ribeiro; Magnesita Refratários S.A., Brazil

Computer Fluid Dynamic

Simulations of the Tapping

Process in a Lead Short

Rotary Furnace

Zhang, Johnny et al.; Central South University, Department of Metallurgy, China

Direct Reduction of Molten

Lead Rich Slag using Eco-

Geen YGL Technology

17:10 Chmielarz, Andrze et al.;

Institute of Non-Ferrous Metals; Gliwice, Poland

A Case Study on Indium

Recovery from by-Product

Lead Alloy

Nagels, Els; Arnout, Sander;

InsPyro N.V., Belgium

Understanding Matte

Formation Using the

Ellingham Diagram for

Sulphides

Coleman, Mark E.; Schenck Process UK Ltd, UK

Upgrade of QSL Furnace

Pulverised Coal Feed at

Korea Zinc

17:35 Ogino, Fumihiko; Nishiwaki,

M.; Fukay, T.; Hosokura Metal Mining Co.,LTD., Japan

The Improvement of Bismuth

Recovery

Böttcher, Bernd; Bähre,

Wolfgang; Knoop, Franz

Martin; JL Goslar GmbH, Germany;

The Lead Anode in Galvano

Technique – A High Tech

Operating Resource?






Wednesday, June 17, 11:00 Sessions Precious Metals Bio Leaching / Zinc Process

Fundamentals, Modelling

and New Processes

Chair KERNEY, U. DECKERS, K. Room 3 7

11:00 Schmitz, Wilfried; Otto Junker GmbH, Germany; Esser, Knut; Berzelius Stolberg GmbH, Germany

Modern Vacuum Distillation

Technology for Zinc

Recovery in Primary Silver

Production

Schlüter, Ralf; Mischo,

Helmut; TU Bergakademie Freiberg, Department of Minning and Special Civil Engineering, Germany

Innovative Conditioning

Approaches for Underground

In-situ Bioleaching

Application

11:25 Deveci, Haci et al.; Karadeniz Technical University, Department of Mining Engineering, Turkey

Pre-treatment of a Copper-

rich Gold Ore for

Elimination of Copper

Interference

Leão, Versiane Albis;

Universidade Federal de Ouro Preto, Brazil; Pina, Pablo S.; Souza, Adelson D.; Votorantim Metais Zinc, Brazil

Batch and Continuous

Bioleaching of Zinc Sulfide

Concentrates with Moderate

Thermophiles

11:50 Dianbang, Shen et al.;

Dongying Fangyuan Nonferrous Metals Co., Ltd., China

The New Development of

Copper and Gold Smelting

Together

Tokoro, Chiharu et al.;

Waseda University, Department of Earth, Resources and Environmental Science and Engineering, Japan

Surface Complexation

Modelling for Zn(II)

Removal by Aluminium

Hydroxide from AMD

12:15 Celep, Oktay et al.; Karadeniz Technical University, Department of Mining Engineering, Turkey

Characterization of

Refractoriness of an

Arsenical Silver Ore

Maccagni, Massimo; Engitec Technologies S.p.A., Italy; Nielsen, J.; Engitec Technologies USA, USA; Hymer, T.; The Doe Run Company, USA

A Hydrometallurgical

Process to Produce Zinc from

Both Primary and Secondary

Sources






Wednesday, June 17, 11:00 Sessions General Hydrometallurgy By-product Treatment and

Strategic Metals Recovery

Technologies

Nickel / Cobalt / Vanadin (NCV)

Light Metals (Mg, Li, Ti)

Chair ANTREKOWITSCH, H. SIEGMUND, A. LUIDOLD, S. SCHOLEMANN, B. Room 15 16 17 18

11:00 Aromaa, Jari; Lehtiniemi, Iiro;

Forsén, Olof; Aalto University, School of Chemical Technology, Finland

Corrosion and Wear of

Mixed Metal Oxide Anodes

in Electrowinning

Pecharroman, E. et al.;

TECNICAS REUNIDAS, Proprietary Technology Development, Spain

ECOLEADTM Process: A

Clean Technology to Recover

Lead and Silver from

Residues

Leszczyńska-Sejda, Katarzyna et al.; Instytut Metali Nieźelaznych, Poland

Hydrometallurgical Method

for Production of CoWO4

Haccuria, Elien *; Hayes,

Peter C.; Jak, Evgueni; The University of Queensland, School of Chemical Engineering, Australia

Phase Chemistry Study of the

Al2O3-CaO-SiO2 System to

Support Lithium Ion Battery

Recycling

11:25 Patiño, Francisco et al.;

Universidad Autónoma del Estado de Hidalgo, Área Académica de Ciencias de la Tierra y Materiales, Mexico

Synthesis and Topology of

the Reaction of Mercury

Jarosite in NaOH Medium

Henry, Philippe;

HYDROMETAL SA, Belgium

30 Years of Recycling of Zinc

and Lead Bearing Materials

at HYDROMETAL

(Belgium)

Pietek, Grzegorz et al.; Instytut Metali Nieźelaznych, Poland

Solvent Extraction of Nickel

by Versatic 10 Extractant

Kurama, Haldun; Eskişehir Osmangazi University, Mining Engineering Department, Turkey; Hoşgün, H. L.; Bursa Technical University, Chemical Engineering Department, Turkey

Kinetics of Thermal

Decomposition and

Hydration of Magnesia

Waste 11:50

Patiño, Francisco et al.;

Universidad Autónoma del Estado de Hidalgo, Área Académica de Ciencias de la Tierra y Materiales, México

Synthesis and Nature of the

Reaction of a Solid Solution

of Ammonium-Potassium

Arsenojarosite in NaOH

medium

Chintinne, Mathias; Smets,

Steven; Metallo-Chimique N.V., Beligium

Treatment of Complex Scrap

at Metallo-Chimique

Readett, David; Mworx Pty Ltd, Australia; Sullivan, Jamie; GME Resources Ltd, Australia

Development of a Ni Laterite

Heap Leach-SX-EW

Flowsheet – GME’s NiWest

Nickel Project

Ohmann, Sven; Ditze, Andre; Scharf, Christiane; TU Clausthal, Institute of Metallurgy, Germany

Recycling of Magnesium

Chips

12:15 Lv, Jianfang; Xie, Feng et al.;

Northeastern University, School of Materials and Metallurgy Engineering, China

Extraction of Heavey Metals

from Waste Solutions by

Emulsion Liquid Membranes

Using Tributylphosphate

(TBP) as Extractant






Wednesday, June 17, 14:10 Session

Precious Metals

Zinc Process Fundamentals, Modelling and New Processes

Chair BALTES, M. STOPIĆ, S.

Room 3 7

14:10 Brunelli, Katya; Cerchier, P.; Dabalà, M.; University of Padua, Department of Industrial Engineering, Italy

Ultrasound Assisted Leaching

Process for Precious Metals

Recovery from Solid

Municipal Waste

Wieckert, Christian;

Tzouganatos, Nikolaos; Paul Scherrer Institut (PSI), Solar Technology Laboratory, Switzerland

Using Concentrated Solar

Radiation in Zinc Metallurgy

14:35 Deegan, David; Johnson, Tim; Tetronics International Ltd, UK

Recovering Precious Metals

& Base Metals from Wastes

Using DC Plasma Arc

Technology

Nakamura, Hirofumi; Yamada, Koji; Aichi, Taro;

Akita Zinc Co.,Ltd., Japan

Development of the “Pb

Less” Electrolytic Zinc

Technology

15:00 Nagai, Takashi et al.; Chiba Institute of Technology, Japan

Recovery of Platinum Group

Metals from Wasted

Automobile Catalyst Using

Perovskite-type Oxide

O’Shea, Brenden; Cooper,

Ross; Hatch, Australia

Effective Front End Loading

of Projects to Support

Equipment Selection and

Flow sheet Optimisation

15:25 Yazici, Ersin Y.; Deveci, Haci; Yazici, Ridvan; Karadeniz Technical University, Department of Mining Engineering, Turkey;

Base and Precious Metal

Losses in Magnetic

Separation of Waste Printed

Circuit Boards (WPCB)

Hernandez-Ramirez, Aurelio;

Romero-Serrano, Antonio et

al.; Departamento de Ingeniería en Metalurgia y Materiales, Mexico

Process Simulation and

Control Optimization of the

Lead Sintering Roasting

Process






Wednesday, June 17, 14:10 Session

Zinc and Lead Mines and Ores Aspects

Secondary Lead Production

Light Metals (Mg, Li, Ti)

Chair SALEHI, F. SCHIERLE, T. SCHARF, C.

Room 16 17 18

14:10 Hesse, Max; Lieberwirth,

Holger; TU Bergakademie Freiberg, Institute for Mineral Processing Machines, Germany

Selective Comminution for

Pre-Concentration at

Mineral Processing

Kunicky, Zdenek; Kovohute Pribram nastupnicka, a.s., Czech Republic

Development of

Polypropylene Recycling

from Lead Acid Batteries for

Blast Furnace Operation

Zhang, Rui *; Taskinen,

Pekka; Aalto University, Metallurgical Thermodynamics and Modelling, Finland

Experimental Investigation

and Thermodynamic

Modelling of the BaO-MgO

System

14:35 Safari, Mehdi; University of

Cape Town, Centre for Minerals Research, South Africa; Kashani, Masoud; Islamic Azad University, Department of Mining Engineering, Iran; Zarei,

Hossein; Ghader Sanate Zagros (GSZ) Company, Iran

Selective Flotation

Optimization of Sphalerite

from Lead and Zinc Ore

Complex (sulphide-oxide)


Improvements in Secondary

Lead Smelting

Köser, Ole; Calcom ESI SA, Switzerland; Rückert, Jürgen; ESI GmbH, Germany; Ubl,

Peter; Stihl, Germany

Modelling and Optimization

of Part Ejection in

Magnesium High Pressure

Die Casting

15:00

Fischer, Martin; Raabe, Lutz; Muldenhütten Recycling und Umwelttechnik GmbH, Germany

Energy Consideration at

MRU GmbH in Freiberg – a

Lead Recycler with

Integrated Hazardous Waste

Incinerator and Plastic

Compounding

Song, Nannan et al.; Instituto de Engenharia Mecânica e Gestão Industrial (INEGI), Portugal

The Influence of Face Coat

Material on the Ti6Al4V and

TiAl Alloys During

Investment Casting Process

15:25

Plenary Lectures of EMC and Pb-Zn Conference 2015 with ... · Plenary Lectures of EMC and Pb-Zn...

Documents

Transcript of Plenary Lectures of EMC and Pb-Zn Conference 2015 with ... · Plenary Lectures of EMC and Pb-Zn...