Platinum LT40
Transcript of Platinum LT40
Updated 13.04.2021
All specifications are subject to change without notice. While all care has been taken, Weldclass accepts no responsibility for any inaccuracies, errors or omissions in this document or attachments. Any comments regarding intended application are for description and identification purposes only. It is the sole responsibility of the user and/or owner and/or purchaser to select the appropriate product for their intended purpose and to ensure that the product selected is capable of performing correctly and safely in the intended application. E.&O.E.
www.weldclass.com.au Page 1 of 3
Platinum LT40LPG Burner Torch System
MoreInfo
Impressive OutputUp to 500mj/h (475,000 BTU)& 1,200mm flame length
Unique Swivel JointEliminates hosetorsion/tension
5/8: UNFStandard/commonconnections
Flame ControlsPilot adjustment +Heating flame adjustment +Squeeze trigger
H/Duty HandleScrewless Single-piecemolded design
Up to 500mj/hr(475,000 BTU) output
Choice of 3 kits(see next page)
Premium PackagingAll kit supplied in single package/carton with display card
Weed Burning
Use with standard4/9/45kg LPG bottle
Water-Proofing,Drying & Thawing
Heat Shrinking/ Wrapping
Bitumen Heating& Concrete Curing
Metal Heating& Weld Pre-heating
Torch Lengths1,000mm & 600mm
Updated 13.04.2021
All specifications are subject to change without notice. While all care has been taken, Weldclass accepts no responsibility for any inaccuracies, errors or omissions in this document or attachments. Any comments regarding intended application are for description and identification purposes only. It is the sole responsibility of the user and/or owner and/or purchaser to select the appropriate product for their intended purpose and to ensure that the product selected is capable of performing correctly and safely in the intended application. E.&O.E.
www.weldclass.com.au Page 2 of 3
400mm Tube+ 50mm Tip185mj/hr output,Max 750mm flame
The “all in one” kit with two tube lengths & two tip sizes.
Gas regulator reduces operating pressure to ≤400kpa for reduced gas consumption, more controlled/ consistent gas flow& finer flameadjustment.
Indicative price only. Contact a Weldclass distributor for final pricing.
H/Duty RegulatorLarge diaphragm formax heat output
750mm Tube + 65mm Tip390mj/hr output, Max 1,000mm flame
5m HoseStandard5/8” UNFfittings
COMBO KIT # WC-02991
$289RRPIncl GST
$219RRPIncl GST
$199RRPIncl GST
400mm Tube+ 50mm Tip185mj/hr output,Max 750mm flame
750mm Tube + 65mm Tip390mj/hr output, Max 1,000mm flame
TORCH KIT # WC-02990 Good choice for fitting to existing hoses & regulator.
Includes two tube lengths & two tip sizes.
Indicative price only. Contact a Weldclass distributor for final pricing.
Cylinder AdaptorWith excess-flowsafety valve
750mm Tube + 65mm Tip500mj/hr (475,000 BTU) output, Max 1,200mm flame
3m HoseStandard5/8” UNFfittings
MAXFLAME KIT # WC-02989 Operates on full bottle pressure* for maximum heat output & flame size.
Includes cylinder adaptor with excess flow safety valve.
*typically 600-1400 kpa depending on ambient temperature
Indicative price only. Contact a Weldclass distributor for final pricing.
Platinum LT40LPG Burner Torch System
MoreInfo
Updated 13.04.2021
All specifications are subject to change without notice. While all care has been taken, Weldclass accepts no responsibility for any inaccuracies, errors or omissions in this document or attachments. Any comments regarding intended application are for description and identification purposes only. It is the sole responsibility of the user and/or owner and/or purchaser to select the appropriate product for their intended purpose and to ensure that the product selected is capable of performing correctly and safely in the intended application. E.&O.E.
www.weldclass.com.au Page 3 of 3
Technical Data
Torch LengthWith 400mm Tube With 750mm Tube
600mm 1,000mm
OutputSet-Up With Regulator @ 400kpa Without Regulator @ 800kpa
Tip Size
Heat / Energy Output
Max Flame Length (mm)
Gas Consumption
50mm 65mm 65mm
185 Mj/hr 390 Mj/hr 500 Mj/hr
175,000 BTU 370,000 BTU 475,000 BTU
750mm 1,000mm 1,200mm
3.7 Kg/hr 7.75 Kg/hr 9.9 Kg/hr
With Regulator @ 400kpa(Combo Kit)
Without Regulator @ 800kpa(Maxflame Kit)
Connections / Threads
Regulator/Cylinder Adaptor Inlet POL Fitting
Regulator/Cylinder Adaptor Outlet 5/8” UNF LH Male
Hose Fittings 5/8” UNF LH Female
Torch Handle Inlet 5/8” UNF LH Male
Torch Handle Outlet M14x1 RH Male
Tube Inlet M14x1 RH Female
Tube Outlet M20x1 RH Male
Tip Inlet M20x1 RH Female
Regulator Spec. Output 0-400 kpa. 60mm diaphragm
Hose Spec. 6mm I.D., max 2,000 kpa working pressure
Weight Handle with 750mm tube & 65mm tip: 1.1kg
Materials / Construction
Handle Grip Single-piece moulded polymer
Handle Body Brass
Handle Lever 2mm pressed steel, nickel-plated
Tube & Tips Nickel-plated steel
Platinum LT40LPG Burner Torch System
MoreInfo