Platform II with Widebay16 Multi-purpose LED fixture kit · While A.L.P. utilizes IESNA testing...
3
General Description This multi-purpose LED fixture kit provides a Type V distribution with a main beam of 50 degrees vertical. This combination is suited for intersection, parking garage, low-bay and other general lighting applications. The LEDs are mounted 4-12” away from the optical surface which provides excellent hiding power. Housing This one-piece casting design can effectively dissipate up to 100W in a 40ºC ambient temperature with an appropriate LED module. The cast aluminum heat sink is offered either raw or powder coated white. To achieve a wide, Parking Garage distribution, there are 12 internal LED board mounting surfaces which are canted 35 degrees from vertical. A new board mounting feature allows a variety of different board shapes and sizes without the need for any drilling or tapping. Boards may effectively be mounted on 4, 6, 8, 9 or 12 faces. Platform II Widebay16 Lens The Widebay16 is a remote optic intended for use with POD style LED high bay and low bay sources. Unlike traditional reflectors, the WB16 is shallow so as to allow higher beam angles. Its large upper shroud flat top allows it to be easily adapted to most any fixture without the need for expensive collars. The lower lens is shaped to distribute light with wide bat- wing pattern, allowing for greater vertical illumination. Light Engine Requirements Suitable light engines are 100W or less, not including driver. For angled face mounting, LEDs should have a 150º FWHM beam or narrower. Each LED, board, and mounting will be different and the customer is responsible for determining the suitability of their LED package with these components. Approvals and/or Listings • ETL Listed to UL1598 and 8750; file sharing program available to all customers • IP66 Rated • NSF International certified for NSF/ ANSI Standard 2 – Food Equipment Service Life Please visit our website www.alpadvantage.com under the Resources section and then select Warranties for more information. Ordering Information Please call 877-257-5841 for pricing and delivery. Typical lead time is 2-4 weeks. All specifications subject to change without notice. A.L.P. Lighting Components, Inc. assumes no responsibility for these materials in any luminaire or application. The product is an OEM component kit requiring final assembly by a qualified OEM fixture manufacturer. A.L.P. 6333 Gross Point Road, Niles, IL 60714 Ph: (877) 257-5841 • Fx: (773) 774-9331 www.alpadvantage.com © 2017 A.L.P. Lighting Components, Inc. Sheet/REV# PLATFORMIIWB16 VN012420 Platform II with Widebay16 Multi-purpose LED fixture kit Angled LED Board Location Dimensions 8.95” high 16” diameter Lens Materials Acrylic: Clear Lumieo Moon Glow™ Polycarbonate: Clear Shroud Materials Acrylic: Lumieo Polycarbonate: Frost Accessories/Options Mounting Hook White acetal latches Clear polycarbonate latches Silicone lens gasket Flat LED Board Location Both Lynk Labs 65W and 100W AC/DC versions ETL File Number 102369752CHI-001 Safety 102510057CHI-001 IP Ask us about our Multiple Listee and File sharing program for your LexaLite Brand SSL luminaires. Contact the Optical Engineering Manager (231) 547-6584 www.platformseries.com
Transcript of Platform II with Widebay16 Multi-purpose LED fixture kit · While A.L.P. utilizes IESNA testing...
General DescriptionThis multi-purpose LED fixture kit provides a Type V distribution with a main beam of 50 degrees vertical. This combination is suited for intersection, parking garage, low-bay and other general lighting applications. The LEDs are mounted 4-12” away from the optical surface which provides excellent hiding power.
HousingThis one-piece casting design can effectively dissipate up to 100W in a 40ºC ambient temperature with an appropriate LED module. The cast aluminum heat sink is offered either raw or powder coated white. To achieve a wide, Parking Garage distribution, there are 12 internal LED board mounting surfaces which are canted 35 degrees from vertical. A new board mounting feature allows a variety of different board shapes and sizes without the need for any drilling or tapping. Boards may effectively be mounted on 4, 6, 8, 9 or 12 faces.
Platform II Widebay16 LensThe Widebay16 is a remote optic intended for use with POD style LED high bay and low bay sources. Unlike traditional reflectors, the WB16 is shallow so as to allow higher beam angles. Its large upper shroud flat top allows it to be easily adapted to most any fixture without the need for expensive collars. The lower lens is shaped to distribute light with wide bat-wing pattern, allowing for greater vertical illumination.
Light Engine RequirementsSuitable light engines are 100W or less, not including driver. For angled face mounting, LEDs should have a 150º FWHM beam or narrower. Each LED, board, and mounting will be different and the customer is responsible for determining the suitability of their LED package with these components.
Approvals and/or Listings• ETL Listed to UL1598 and 8750;
file sharing program available to all customers
• IP66 Rated• NSF International certified for NSF/
ANSI Standard 2 – Food Equipment
Service LifePlease visit our website www.alpadvantage.com under the Resources section and then select Warranties for more information.
Ordering InformationPlease call 877-257-5841 for pricing and delivery. Typical lead time is 2-4 weeks.
All specifications subject to change without notice. A.L.P. Lighting Components, Inc. assumes no responsibility for these materials in any luminaire or application.
The product is an OEM component kit requiring final assembly by a qualified OEM fixture manufacturer.
A.L.P.6333 Gross Point Road, Niles, IL 60714
Ph: (877) 257-5841 • Fx: (773) 774-9331www.alpadvantage.com
© 2017 A.L.P. Lighting Components, Inc.Sheet/REV# PLATFORMIIWB16 VN012420
Platform II with Widebay16Multi-purpose LED fixture kit
Angled LED Board Location
Dimensions8.95” high16” diameter
Lens MaterialsAcrylic:Clear LumieoMoon Glow™Polycarbonate:Clear
Shroud MaterialsAcrylic: LumieoPolycarbonate: Frost
Accessories/OptionsMounting HookWhite acetal latchesClear polycarbonate latchesSilicone lens gasket
Flat LED Board LocationBoth Lynk Labs 65W and 100W AC/DC versions
ETL File Number 102369752CHI-001 Safety 102510057CHI-001 IP
Ask us about our Multiple Listee and File sharing program for your LexaLite Brand SSL luminaires.
Contact the Optical Engineering Manager(231) 547-6584www.platformseries.com
Paint Mask LineNo Paint Allowed onInside Surfacesor Part Past this Line
Section A-A
1.80 2.11
3.60±.05
13.75 .35
1.30 TYP.SYM.
2.31SYM.
8.07
6.46
3.23
7.40
3.70SYM.
2.36 3/4 - 14 NPT 0.54 L2 PER ANSI B1.20.1
DRILL POINTSTYP (12) PLC
2.53TYP.
2.75
1.38
3.00
6.00
4.62
2.31
3.05
1.53
EJECTOR PINS TO BE LOCATEON THIS SURFACED
Ø 0.176 .40PER NADCA P-4A-10-06
Ø 11.682 B.C.NO EJECTOR PINS
LOCATED ON THIS SURFACE
1/2" K.O.TYP. 3 PLC.
3/8" K.O.
Ø 0.153 0.40 PER NADCA P-4A-10-0612 PL. EQ. SPACEDAS SHOWN
EJECTOR PIN WITNESS MUSTBE RECESSED IN THIS SURFACEMAX 0.030 DEEP
.010TYP. 12 PLC.
Ø 9.576 - 0.0560.010+ B.C.
Ø 13.190 B.C.
Ø 0.18 DRILL POINTYP (4) PLC EQ SPACEDON 13.190 B.C. T
30.0° SYM
60.0° SYM
Ø 0.10 TYP(5) PLC .40
Ø 0.176 .40PER NADCA P-4A-10-06
4 PL. AS SHOWN
12.82+DFT
A.L.P.6333 Gross Point Road, Niles, IL 60714
Ph: (877) 257-5841 • Fx: (773) 774-9331www.alpadvantage.com
© 2017 A.L.P. Lighting Components, Inc.Sheet/REV# PLATFORMIIWB16 VN012420
Platform II with Widebay16Multi-purpose LED fixture kit
A.L.P. LexaLite Brand Test Report 05989Specification PFII with WB16Input Wattage 69.60Delivered Lumens (lms) 6468.2Efficacy (LpW) 92.93Voltage (V) 120-277v
Lumen Summary
Zone Lumens %Fixt
0-30 1205.34 18.63
0-40 2140.27 33.09
0-60 4194.22 64.84
0-90 5727.63 88.55
40-90 3587.36 55.46
60-90 1533.41 23.71
90-180 740.58 11.45
0-180 6468.21 100.0
Exploded View
Dimensions
Platform II Casting
Platform II Gasket
Widebay16Gasket
(6) Latches
(4) Hex headself threading fastener
Widebay16 Shroud
Widebay16 Lens
8.81 REF
Fixture Performance for Reference Only
MaterialsSee the Lexalite® brand price list for current part numbers and material offerings. Up-to-date and detailed material specifications can be found in the Resources section on our website www.alpadvantage.com.
When using acrylic, the surface temperature of the lens should not exceed 80˚C. When using polycarbonate. The surface temperature of the lens should not exceed 90˚C.
QualityThe Platform casting is primarily a functional industrial grade component. Our pricing is based on this expectation.
CautionSharp edges may occur at several locations on the part. We urge customers to select the shot-blasted option which reduces this hazard and also to wear gloves when handling.
Notice A.L.P. assumes no responsibility for suitability of these materials in any luminaire or application. Please test for fit and function prior to ordering project quantities.
While A.L.P. utilizes IESNA testing procedures and believes our testing results to be accurate, A.L.P. provides photometry for reference only. Actual results will vary based on the actual light source(s) and power source(s) used, i.e. ballast, driver, generator, etc. and the combinations in which they are used, as well as operating temperatures, and other electrical and environmental variables. We urge that customers perform their own fixture qualifications prior to making performance-based claims. In no event will A.L.P. be liable for any loss or damage, including without limitation, indirect or consequential loss or damage in connection with the use of this information.
This drawing is for reference only. Actual part dimensions will vary. Customer is urged to review actual samples to confirm fit and function. All specifications and dimensions are subject to change without notice.
A.L.P.6333 Gross Point Road, Niles, IL 60714
Ph: (877) 257-5841 • Fx: (773) 774-9331www.alpadvantage.com
© 2017 A.L.P. Lighting Components, Inc.Sheet/REV# PLATFORMIIWB16 VN012420
CASTINGPart Number Description Material Qty/Case209371 HSG/Heat Sink Die cast alum, Raw, with 3/4” NPT thrd Hole 10 5/ctn, 135/pltREFLECTORPart Number Description Material Qty/Case833944 Inner Reflector "Specular aluminum" 400
Partner ComponentsLynk Labs Patented UVDoBTM TechnologyPart Number
Description Supplier
n/a LynkLab 65 watt - 8”dia. AC-AC LED Board #SRC200-65W-__K-U (847)783-0123 Lynk Labsn/a LynkLab 100 watt - 9”dia. AC-AC LED Board #SRC200-100-__K-U (847)783-0123 Lynk Labs
CASTING
LATCHES
TOP SHROUD PFII
BOTTOM LENS
Platform II with Widebay16Multi-purpose LED fixture kit
209371
811464
811450
209381 209383
**Cut-out to fit Platform II Hsg
TOP SHROUD-PLATFORM IIPart Number Description Material QTY811464 WideBay16 Shroud Lumieo PLTFMII** Lumieo Acrylic 20/ctn, 360/plt811463 WideBay16 Shroud FROST PC PLTFMII** Frost Polycarbonate 20/ctn, 360/pltBOTTOM LENSPart Number Description Material QTY811450 WideBay16 Lens AC-FC Clear Acrylic LED Grade 20/ctn, 360/plt811453 WideBay16 Lens MG MoonGlow Acrylic 20/ctn, 360/plt811451 WideBay16 Lens Lumieo Lumieo Acrylic 20/ctn, 360/plt811452 WideBay16 Lens PC Clear Polycarbonate 20/ctn, 360/pltMISCELLANEOUS PARTSPart Number Description Material QTYHOOK-PF Platform HB Mounting Hook 50HOOK-PF-HL Platform HB Mounting Hook with Hole 50209381 PLTFM Latch Acetal White White Acetal, (6) required per Shroud 216/bag209383 PLTFM Latch Clear PC Clear PolyCarb, (6) req. per Shroud 216/bag209346 Gasket - Silicone for lens perimeter Silicone gasket for IP66 assembly Bulk209366 Gasket - j-box cover Silicone gasket for Shrd and Pltfm II Hsg Bulk
Hook
HOOK-PF-HL
