Plastipack product information including the high perfomance Guard range and GeoBubble™ technology
-
Upload
plastipack -
Category
Services
-
view
25 -
download
1
Transcript of Plastipack product information including the high perfomance Guard range and GeoBubble™ technology
©Plastipack 2014
Evaporation resource and heat loss
By preventing evaporation 70% of the potential heat loss can be prevented.
Why?
To heat 1 gram of water = 1 calorie of energy To evaporate 1 gram of water = 540 calories of energy.
1 calorie = 4.186 joules the specific heat of water. This is how a solar blanket is able to heat the pool so effectively. Compared to an uncovered pool, gram for gram, the energy savings are vast.
All Plastipack materials reduce evaporation by over 98%.
©Plastipack 2014
Insulation
The air trapped inside and between the bubbles work as insulation.
400 micron Light Blue material.Thermal information in different formats, R, U and K valuesThe R value for Plastipack’s 400 Grade products is 0.06 m²K/W.The overall thermal conductance or U value is , which is 16.67 W/(m2K) for Plastipack’s 400 grade material.From this a k value (Thermal conductivity) can also be worked out, when R value is known.
So k value is 0.00606 (W/K-m) for Plastipack’s 400 grade material.
©Plastipack 2014
Keep debris out of the pool
Keeping the cover on the pool not only keeps the heat in the pool but also prevents foreign matter from entering the pool.
Only 10% of the chlorine in a pool is used as the active sanitizer to keep the water safe. The other 90% is used as an oxidiser to break down foreign matter in the water caused by debris blowing in and bathing loads.
©Plastipack 2014
It is of utmost importance that the material is maintained according to industry standards, and should always be removed from the pool when shock dosing.
Chemical Balance Summary
Substance Ideal Range
Salt 2500-4000ppm
Stabiliser depends on chlorine demand
Free Chlorine 2.0-4.0ppm
Combined Chlorine <0.2ppm
Total Chlorine TC=FC+CC
Total Bromine 4.0-6.0
Ph 7.2 -7.8ph
Total alkalinity 80-120ppm
Calcium hardness 150 -400ppm
Total dissolved solids <2000ppm
Phosphate as little as possible
Heavy metals as little as possible
Note - the cover can look perfectly fine and appear intact but that does not mean the damage has not been done! For more information please our Who killed the cover document.
*ppm (part per million)
Understanding chemicals can increase the life of a cover
Manufactures of Energy and Resource Saving Products
Plastipack’s high performance Guard range is scientifically designed for peak performance with a unique additive package to ensure the 6-year expected
lifespan on a correctly balanced pool.
©Plastipack 2014
“I replaced my standard cover recently with a Sol+Guard™ pool cover with GeoBubble™ Technology bubble design; the new cover is really effective! I am very happy with the cover’s performance and have already seen the temperature in my pool increase by 3 to 4°C since replacing my old cover with the Sol+Guard™ material.
The GeoBubble™ design seems much more durable and thicker than my old cover and I have high hopes for it lasting longer than my traditional cover on my salt chlorinated pool. The Sol+Guard™ soft blue tint looks elegant on the water and makes it hard to spot any residue from the water or dirt that may rest on the top of the cover.”
GLR – Madrid-Spain-2014
©Plastipack 2014
Eliminates water evaporation by 98%+
Increases pool temperature by up to 8ºC
Reduces energy consumption by over 70%
Reduces chemical consumption by over 30%
With GeoBubble™ technology
Reduces running cost
500 micron
6 year pro rata manufacturers warranty
©Plastipack 2014
Sol+Guard was designed and tested to allow the maximum solar energy to pass through the material heating the water. Sol+Guard transmits nearly 80% of the sun’s energy into the pool, heating the water and basin of the pool to provide an even temperature throughout the water.
The tests in the UK showed that a covered pool without any heating system can keep the water at a comfortable temperature, keeping the need for additional heating at a minimum.
0 200 400 600 800 1000 1200 1400 1600 1800 200015
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33 Average Temperature Analysis July 2013
Control Average Average Sol+Guardtime
tem
pera
ture
˚C
©Plastipack 2014
Sol+Guard™ Unique additive package and the innovation of the GeoBubble™ technology provides a long-lasting, high performance material which can reduce running costs. The cover pays for itself in savings in under a year.
©Plastipack 2014
"As someone who has been in the pool industry for many years I am always seeing new products making great claims as to how good they are so it was with some doubt in my mind that I tried the black EnergyGuard™ GeoBubble™ pool cover on my own pool.I put it on in September and did not put any winterising chemicals at all in the pool. When I drew the cover back in May I was delighted and, I have to admit, quite surprised to see that the pool water was absolutely crystal clear. Just as I had left it 7 months ago. All the pool needed was one visit from my pool cleaner and it was ready to swim in. I am highly delighted with the algae-restricting performance of the EnergyGuard™ cover. Not only did it give me a crystal clear pool, it also saved money on winterising chemicals.For the first time in 20 years I did not have to do any Spring clean up in my pool."Peter Joyce. MD of PoolStore UK Ltd. www.poolstore.co.uk
©Plastipack 2014
Inhibits algae growth
Eliminates water evaporation by 98%+
Increases pool temperature by up to 4ºC
Reduces energy consumption by up to 60%
Reduces chemical consumption by up to 70%
Reduces pump filtration times by up to 50%
Anti algae – winter pool cover
Reduces running costs
6 year pro rata manufacturers warranty
©Plastipack 2014
How the material heats the water
Not all the potential energy available in the sun’s atmospheric window is absorbed by the water before being reflected out of the pool. By using the EnergyGuard™ material, almost all the light potential energy is captured and radiated into the surface of the pool. By running the filtration or simply swimming in the pool, the free heat provided by the EnergyGuard™ material is quickly spread throughout the pool, raising the temperature by up to 4˚C.
©Plastipack 2014
How the cover saves chemicals
Photosynthesis uses the visible spectrum. By being opaque, the cover inhibits photosynthesis, preventing outbreaks of algae in the pool. This in turn minimises the amount of chemicals required as well as the pool's filtration requirements. Active chlorine is deactivated by UV light. By absorbing this energy, the EnergyGuard™ material prevents the deactivation of the active sanitizer, reducing the need for chemicals in the pool. EnergyGuard™ reduces chemical demand by up to 70% and allows for a chemical-free shut down or hibernation of the pool.
©Plastipack 2014
EnergyGuard™ Unique additive package and the innovation of the GeoBubble™ technology provides a long-lasting, high performance material which reduces running costs. The cover pays for itself in savings in under a year.
©Plastipack 2014
Reflects the sun’s heat away from the pool
Eliminates water evaporation by 98%+
Reduces water temperatures by up to 15%
Reduces chemical consumption by up to 70%
Reduces pump filtration times by up to 50%
Anti algae – winter pool cover
Reduces running costs
6 year pro rata manufacturers warranty
©Plastipack 2014
Keep the pool refreshing
300 350 400 450 500 550 600 650 700 750 8000
10
20
30
40
50
60
70
CoolGuard Light Reflectance
Wavelength nm
%re
flect
ed
CoolGuard™ is an opaque material with a high reflective index in the visible and infra red spectrum, keeping the sun's energy away from the pool and in turn reducing the temperature by up to 15%.
Though the cover will insulate a pool if heating is used, the CoolGuard™ is ideal for hot climates where a refreshing swimming environment is preferred.
©Plastipack 2014
How the material saves chemicals
Photosynthesis uses the visible spectrum. By being opaque, the cover inhibits photosynthesis, preventing outbreaks of algae in the pool. This is turn minimises the amount of chemicals required as well as the pool's filtration requirements. Active chlorine is deactivated by UV light. By absorbing this energy, CoolGuard™ prevents the deactivation of the active sanitizer, reducing the amount of chemicals required in the pool. CoolGuard™ reduces the chemical demand by up to 70% and allows for a chemical-free shut down or hibernation of the pool.
©Plastipack 2014
CoolGuard™ Unique additive package and the innovation of the GeoBubble™ technology provides a long-lasting, high performance material which reduces running costs. The cover pays for itself in savings in under a year.
©Plastipack 2014
Storing the cover on a reel in direct sunlight can cause the material to deform and take the shape of the reel, where after the cover will lose its ability to lay flat on the water.
The material deforms as the insulating properties of the cover causes heat to build between the layers which can reach a harmful level.
To prevent this, Plastipack developed the reflective cover to allow ease of storage when not in use.
Using the reflective cover as protection, the internal temperature of the material can be reduced by up to 30°C.
Reflective cover sheet
©Plastipack 2014
Increase a pool cover’s expected lifespan by 25% +
The new design removes residual stresses from the material, creating a more durable, longer lasting bubble. Unlike most standard 12mm bubble designs, GeoBubble™ technology has
been engineered specifically to survive the swimming pool environment.
©Plastipack 2014
Manufacturers of Energy and Resource Saving Products
Thank you
Manufacturer Product Information Water Storage www.plastipack.co.uk www.geobubble.co.uk www.vapourguard.com
Wainwright House, 4 Wainwright Close, Churchfields Industrial Estate, St Leonards-on-sea,
TN38 9PP UK t: +44 (0) 1424 851 659 f: +44 (0) 1424 853 909 e:[email protected]