PLASTICS - Gimatic · VACUUM CUPS H04 S01 E02 R03 Hardness 60 55 48 53 Temperature range -25° ÷...
Transcript of PLASTICS - Gimatic · VACUUM CUPS H04 S01 E02 R03 Hardness 60 55 48 53 Temperature range -25° ÷...
Gimatic Srl società unipersonale - Via E.Ferrari 2/4 - 25030 Roncadelle (BS) T. 030 2584655 E. [email protected] - W. www.gimatic.com - C.F e P.I. IT02969010178
V0116HO4V0216HO4
V0316HO4
VACUUM CUPS
H04 S01 E02 R03
Hardness 60 55 48 53
Temperature range -25° ÷ +150° -70° ÷ +200° -40° ÷ +100° -40° ÷ +80°
Typical applications Plastics Food Automotive Paper
Material HNBR Silicon EPDM NR
• Two styles: flat or with 1.5 or 2 bellows• Four materials: Silicone, EPDM, natural
rubber, HNBR• Diameters from 11mm to 53mm
PAAT16R PAAT20R PAAT30R PAAT40R PAAT50R
Weight 8.9 g 9.2 g 34.5 g 37.3 g 40.8 gDiameter ø 16 mm ø 20 mm ø 30 mm ø 40 mm ø 50 mm
• Gripping cup in PTFE• Flexible bellow in Silicone• Nipple in stainless steel• Working temperature up to 250°C
• The PTFE cup doesn’t stick to the warm polymers and fibers
• The supporting ribs avoid the suction of the soft materials
• The flexible lip allows a good va-cuum even at the low temperatures
• The elastic suspension allows axial and angular movements
CARBON FIBER
REINFORCED
PLASTICS
PTFE
HIGH
TEMPERATURE
NO MARKING
MATERIAL
PLASTICS
NEW
Gimatic Srl società unipersonale - Via E.Ferrari 2/4 - 25030 Roncadelle (BS) T. 030 2584655 E. [email protected] - W. www.gimatic.com - C.F e P.I. IT02969010178
VACUUM CUPS
VP SERIES
WD SERIES
WS SERIES
WF SERIES
PLASTICS