PLASTIC TECHNIQUES, INC. -...
-
Upload
truongkiet -
Category
Documents
-
view
214 -
download
2
Transcript of PLASTIC TECHNIQUES, INC. -...
UTILITY CATALOG — Rev. Aug-08Your Number 1 Source for Aerial Lift Bucket Liners and Accessories
PLASTIC TECHNIQUES, INC.
BOXES & TRAYS - BUCKET ENHANCEMENTS - BUCKET COVERS & LIDSBUCKET LINERS - SAFETY EQUIPMENT - SCUFF PADS - TOOLS & TOOL TRAYS
Aerial lift bucket liner under dielectric test at PTI’s new testing laboratory.The lightning-like corona discharge from liner to water is typical in a 70 to100kv dielectric test.
Plastic Techniques Inc. was incorporated in New Hampshire thirty-four years ago, itsoffice and plant were located in the town of New Boston, population 922. Actually, thingsgot off to an inauspicious start during that cold winter of 1968 when a major snow storm,often referred to as a Nor’easter, stranded the tractor-trailer rigs that were haulingthe new molding equipment to New Boston.
We sat in our 3,000 square foot building, that once housed a buggy repair business,waiting for the storm to abate, the roads to be cleared, the trucks to be pulled outof drifts, and for our new venture to begin!
Of course, things did eventually get started. We have grown slowly and steadily duringthe past third century. Always remembering the customers, past, present and future,who give us our jobs and keep our company going and growing. We always remember thatcommitment: our products are safety related and nothing must compromise the qualitythat utilities have come to know and expect.
During the mid-1980’s, we moved to a new 50,000 square foot facility, designed and builtspecifically for ourtype of operation.
This new facility hasprovided room to growand its fire resistiveconstruction and firesuppression systems,heat and water recy-cling systems, airquality management sys-tem, and the like willallow us to continue toprovide an uninter-rupted supply of prod-ucts to our customersfor many years.
Our all new 2004 cata-log includes productsin eight different cat-egories all designed to augment the task of the lineman. We hope that as you look throughour product listings, there will be several products that will be helpful to you. Thereare a few products that were too new to make the catalog; so, if you don’t see whatyou need, call and ask; we may have it or maybe we can custom manufacture it for you.
If you are planning to visit Northern New England, please give us a call. We’ll sendyou a map and some tourist information listing the attractions in New Hampshire. Whenyou get here, we would enjoy showing you our production facility and sharing a cup ofcoffee, apple cider or whatever is in season.
About PTI . . .
FORM #0001-C 6/99 Rev.5/07Copyright 2007
P.O. BOX 250 n GOFFSTOWN, NEW HAMPSHIRE 03045-0250 n TEL: 603-645-6800 n FAX: 603-623-
PLASTIC TECHNIQUES, INC.
Designed for use on metal aerial lift baskets.
Need an Accessory for your Metal Frame Basket?
Plastic Techniques can help!
Our catalog has a large selection of tool trays,lights and tool holders designed especially foraerial lift baskets and the people who work inthem. Nearly all of our products designed foraerial lift baskets can be fitted for metalframe baskets as well.
Call us today at 603-645-6800 and tell us the size of the metal tubingon your particular basket and what we can make for you.
Tool Organizers and Impact Wrench Holters
• Utilitze maximum space efficiency with PTI ToolOrganizers! (can be fitted to your metal framebasket)
Tool Trays
• If your looking for a safe andconvenient way to store yiour tools andCATV meters, look no further! PTI ToolTrays are weather resistant andimpervious to motor oil, hydraulic oiland a broad range of chemicals. PTIoffers over 25 configurations to meetall your storage needs!
Form 9017-C 02/01 Rev.5/07Copyright 2007
Lighting
PTI offers a vast array of lighting for your onthe job needs. Whether you need a hand heldflashlight or the power of a Litebox with 1million candlepower or anything in between,you'll find it in our lighting section.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
SECTION 1 – Bucket Enhancements
* Lip Clip/Bucket Seat/EZ Step * Saw Scabbards/Boom Mounted Saw Holder * Lip Protectors/Jumper Holders * Hot Stick Hanging Rail/Folding Shotgun Holder * Tool Organizer Diagrams * Tool Organizers * Tool Holders * Heaters * B.A.S.S. Universal Bracket System
SECTION 2 – Bucket Covers & Lids
* Lid Series Configuration * Tru-Fit Lids * “Fit-All” Soft Covers & Soft Covers No Foam
SECTION 3 – Bucket Liners
* 2 Safe * Liners w/ Molded Step * Altec Models * Asplundh Models * Baker Models * Hi-Ranger Models * Holan Models * Lift-All Models * McCabe Models * Pitman Models * Reach-All Models * RO Models * TECO Models * Tel-E-Lect Models * Time/Versalift Models * Utility Body * Various Mfg. – Aerial Lift, Hunt-Pierce, Dur-A-Lift, Skyworker
SECTION 4 – Safety Equipment
* Aerial Safety Light UL-2A * Replacement Parts UL-2A * Lineman’s Utility Light UL3 * Replacement Parts UL3 * Blanket Canisters * Glove Box/Line Hose Box * Pole Hauling Lights * Wheel Chocks/Outrigger Pads * Line Hose Spreader * Rainbow & Timberwolf Waterless Hand Cleaner * Protective Light Base Cover
SECTION 5 – Scuff Pads
* Scuff Pads – All Models Chart * Fiberglass Scuff Pads * “Tru-Grit” Scuff Pads * BD & BDL Scuff Pads * Ergonomic Safety Grating * Ergonomic Bucket Liner Pads * Hy-Jacker
SECTION 6 – Tools & Tool Trays * Round Tool Buckets/Canvas Tool Buckets/Line Hose Bags * Canvas Tool Buckets & Bags * Lg Canvas Splicer’s Bag * Splicer Seat & Tool Box * Tool Tray Models- All * Tool Trays * Tool Trays w/ Docking Station * Semi-Oval Poly Tool Tray * CATV Tool Trays * Inside Mount Tool Tray * Omni Pouch/Standard Bucket Hooks * 4 Pocket Tool Roll/Hardware Trays * Hydraulic Crimping Head Holder * Intensifier Holders * Lineman’s Triple Square Wrench * Workman’s Platform * Replacement Parts for Tool Organizers
SECTION 7 – Lighting Equipment
* Stinger Parts & Accessories * Streamlight Rechargeables Parts & Accessories * Stylus/Stylus Reach/Keymate/ 4AA LED/Septor * Survivor/Scorpion * Litebox * Litebox Holder/HID Litebox & Holder * Vulcan/Hand Held Lights * Aerial Work Light/UL5 Work Light * Lineman’s Utility Light UL3 * Replacement Parts UL3 * Aerial Safety Light UL-2A * Replacement Parts UL-2A * Pole Hauling Lights
SECTION 8 – Boxes & Trays
* Containment Trays * Containment Vessels * Transformer Maintenance Trays/Utility Boxes
SECTION 9 – Information
* Catalog on Disk * Guarantee * Terms & Conditions * Order Form * Repair Center * Return Policy * Test Procedures
TABLE OF CONTENTS
Click on a Section or Item to Begin Browsing.
FORM #3007-C Rev. E 5/07Copyright 2007
• Lip Clip/Bucket Seat/EZ Step
• Chain Saw & Pruning Saw Scabbard/Boom Mounted
Saw Holder
• Lip Protector/Jumper Holder
• Hot Stick Hanging Rail/Folding Shotgun Stick
Holder
• Tool Organizer Diagrams
• Tool Organizers
• Tool Holders
• Heaters
• B.A.S.S. Universal Bracket System
The aerial lift basket is more than a tool, it is an office. PTI is continuouslylooking for ways to make the lineman's job safer and easier. This section, BucketEnhancements, contains products that are designed to be rugged and have a longservice life. All of the materials used in the products are the result of exten-sive research and testing. The Tool Organizers, for instance, required overeight months of selecting and testing the materials involved. What we have pro-duced is by far THE BEST tool organizer platform available today.
PLASTIC TECHNIQUES, INC.
— SECTION 1 —BUCKET ENHANCEMENTS
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
Click on an item or scroll down to browse this section.
BUCKET SEAT
MODEL #HS
PTI's SPLICER BUCKET SEAT ismade of a special grade of
polyethylene.• Form fitting seat - very comfortable
for a day's work.
• Location and height can be adjusted tosuit anyone.
• Repositioning allows operator to seein any direction.
• Easy to remove when not in use.
EZ STEP(U.S. PATENT N. 235474)
A New Solution to an Old Problem!The quick and easy way out of anaerial lift bucket with a liner.
• Fits all standard 1 man and 2man aerial lift buckets!
• Strong! Lightweight! Impactresistant polycarbonate!
• Dielectrically safe! No metal!
MODEL # EZ-2
FORM #3038-C Rev D 5/07Copyright 2007
BUCKET LINER LIP CLIP• Designed to hold
horizontally stored linersfirmly in the bucket.
• Rugged, non-conductiveplastic construction.
• Installs in seconds withouthardware.
Sold in Pairs
Installed ViewSide View
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
#LEDOMITP NOITPIRCSED
2-ZE sbl572rofdetarpetshcni72
A2-ZE pilrediwrofpetSZEyloP
B2-ZE sbl053rofdetaR
100112 petstixetekcuB
BUCKET ENHANCEMENTS
PTI MODEL # DESCRIPTION
HS Bucket Seat
ST5-HS Replacement straps
CHAIN SAW SCABBARDS
FORM #3009-C Rev C 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
Both models hang on either the in-side of the bucket, or the outside.The PTI chain saw scabbards aredesigned to hold standard sizedchain saws.
Model CSS
#ITP NOITPIRCSED
SSC drabbacSwasniahCssalgrebiF
SSR SSCledoMrofhtaehSwaStnemecalpeR
02-SSC drabbacSwasniahCcitsalP
12-SSC partshtiwdrabbacSwasniahCcitsalPtnuoMedistuO
22-SSC partshtiwdrabbacSwaSniahCcitsalPtnuoMedisnI
32-SSC drabbacSwaSgninurPcitsalPtnuoMedisnI
42-SSC llams(drabbacSwaSgninurPcitsalPtnuoMedisnI)rotom
52-SSC "33,drabbacSwaSniahCcitsalP
• Fits virtually all standard aeriallift booms.
• The holder mounts to the boom usinga ratchet for a sure grip.
• Made from a specially formulatedpolyethylene that has demonstratedsuperior resistance to cold weather.
• Impervious to hydraulic oils.• Lightweight, durable, resistant to
U.V. degradation
LEDOM NOITPIRCSED
4-HSB redloHwaSniahCtnuoMmooB
HSC pilceldnah/wredloHwaSralucriCyloP
HTP pilceldnahhtiwredloHlooTrenurP
Model BSH-4
Model CSHCircular Saw
Model PTHHydraulic Pruner
Holder
Models CSS-24, CSS-23 &CSS-20
BOOM SAW AND PRUNER HOLDERSThe long reach chain saw holder mountsto the boom of thetruck eliminating work area interferencewhen not in use.
BUCKET ENHANCEMENTS
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
LIP PROTECTORS
Extend the life of your Buckets and Liners .. . with "PTI" Lip Protectors
MODEL #PC55
PTI’s Lip Protectors are made from a special grade ofdurable low density polyethylene which offers excel-lent protection in all kinds of weather.
Call for availability of Lip Protectors to fit bucketswithout Liner.
FORM #3011-C Rev. E 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
• Protects against rope chafing, scoring and gougingby tools and normal wear and tear.
• Fits snugly inside liner or inside Bucket.
• Permanent nylon (non conductive) fasteners included.
• Available in many liner and Bucket configurations.
LEDOM EPAHS #RENILITPSTIF
51CP ralugnatceR 02-T,02-TA
55CP erauqS ,14-L,24-H,83-H,14-LA,S93-T,93-T,04-A,74-P95-U,95-UB,95-UR,14-MT,14-ET,14-UR
58CP dediS6 64-P
8-FCP 8foteS .nirotcetorppildlohotsrenetsaFtnemecalpeR
8-LCP ralugnatceR )ytilibaliavAdetimiL(03-A
24-LCP ralugnatceR )ytilibaliavAdetimiL(03-TA
JH1 (tool not included)
JUMPER HOLDERS
BUCKET ENHANCEMENTS
MODEL DESCRIPTION
JH1 Jumper Holder
JH2 Jumper Holder Double
Designed for use on aerial lift bucket trucks
JH2 (tool not included)
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
HOT STICK HANGING RAILAnd Tool Holder
Designed for use on aerial lift bucket trucks
Mechanical - Rugged polyethylene and FRP construction for reliable, field provenservice.
Efficient - Promotes rapid access to storage and retrieval of hot sticks, cutters andother tools.
Ultraviolet - Inhibitor protects from sunlight degradation.
Carries- Mulitple tools on rigid 3/4" diameter PVC rod.
Impervious - Special polyethylene formula is not affected by hydraulic oils and motoroils.
Versatile - Can hang on inside or outside of basket.
HOT STICK HOLDERSHelps Protect Hot Sticks at the Job Site
Convenient Aerial Storage ... Space-Saving ... Impact Resistant
Efficiently organizes your aerial work area. Frees up your limited bucket space.
Helps protect the dielectric integrity of hot sticks at job site. Case provides protectionfrom UV rays and mechanical damage.
Durable polyethylene construction is weather resistant and impervious to hydraulic oils.
Carries one stick up to 40" long and 8" wide when collapsed.
HT-10 and shotgun stick(not included)
FORM #3063-C Rev 8/08Copyright 2008
PLASTIC TECHNIQUES, INC.
HSHR
BUCKET ENHANCEMENTS
PTI MODEL # DESCRIPTION
HSHR Hot Stick Hanging Rail, Outside Mount
HSHR-I Hot Stick Hanging Rail, Inside Mount
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
TOOL ORGANIZER DIAGRAMS
FORM #3013-C Rev.D 5/07Copyright 2007
BUCKET ENHANCEMENTS
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
BUCKET ENHANCEMENTS
TOOL ORGANIZERS• AVAILABLE FOR METAL FRAME BASKETS.
• Offers the maximum in space efficiency.
• Fits virtually all aerial lift buckets.
• Made of thick durable, polymer.
• Won’t bloom like fiberglass; eliminates cuts, scratches and irritationassociated with fiberglass.
• Boards measure 18" x 20" (TO-BH2 is 4"x20").
• Replacement components available. See catalog section 6.
• TO-BH2 stores up to 15/16" diameter bits, up to 16" in length.
MODEL #210026
FORM #3012-C Rev. G 5/07Copyright 2007
NOTE: All of the utility components are made from high quality, heavy duty topgrain saddle leather. Canvas bag is an option. Blank boards and customizedconfigurations available, call for details.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
PLASTIC TECHNIQUES, INC.
NOITPIRCSED htiW#LEDOMGABREHTAEL
htiW#LEDOMGABSAVNAC
draobknalB B1-OT
spooldnasehcuoplooT 1-OT C1-OT
1-OTfonoitarugifnoceR J1-OT CJ1-OT
stekcarbhtiwdraobyloptalF LY1-OT Y1-OT
)DI"1x"31(redlohtibhtiwOT 2-OT C2-OT
spool6htiw1-OTotralimiS 3-OT C3-OT
)5HBA(skooH-ShtiwC3-OTotralimiS S3-OT
stekcarBoN-seloH.aid"4/32htiwrezinagrolooT Y3-OT
mottobnosavnac2,pottaspoolegral5 4-OT C4-OT
spoolartxednaredlohtibhtiW 5-OT C5-OT
elytsdlosredlohloot2dnahcuoplooT 6-OT C6-OT
elytswensredlohloot2dnahcuoplooT LY6-OT
spoolfostes2dnasgabsavnac2htiW C7-OT
panS/wretsloHs'nameniLrehtaeLtekcoP5/w1-OT 100012
hcuoprehtael1dnaredlohloot1,spool4 010012
htaehsefink1dnasredlohloot2,spool3 110012
hcuoprehtael&skooHS/welytsdlorezinagrOlooT 810012
.grOrehtaeL,gabsavnaC,7PT/wrezinagrOlooT 020012
savnac,redlohloot,spooLms2pooLremmaHgL2/wrezinagrOlooTgab
120012
pooLremmaHlateMhtiw5-OT 420012
pooLremmaHlateM/wC2-OT 520012
savnaC/wrezinagrOlooT 620012
s'PRrehtollafo1&redlohtib,sehcuoprehtaeL2/wOT 820012
mroftalpleetstifotrezinagrO5-OT 920012
hcuop7-PT/w,spoolsuniM4-OT 030012
yarT/welytS2-OT 330012
sredloHlooTartxE&redloHtiBreguA/wrezinagrOlooT 430012
seloH/wLY6-OT 150012
draobtalf,sgabsavnac2,spool.gL5/wrezinagrOlooT 250012
redlohloot,redlohtib,gabsavnac,gnibbewnottoc/wdraoBlooT 350012
* Tools Not Included
BUCKET ENHANCEMENTS
TOOL HOLDERS
MODEL #IWH SERIES
MODEL #IWH2 SERIES
MODEL #IWH3 SERIES
MODEL # IWH-4 SERIES
MODEL # IWH-5
• All Holsters available with either Inside or Outside Mount,
• IWH2 Fits Burndy Crimping Tool #BCT500.
• Offers the maximum in space efficiency.
• Standard color is yellow.
MODEL # IWH-6 SERIES
NOTE: Closed bottom design requires that bit be removed from wrenchbefore storing to prevent electrical contact hazard associated with exposedconductive bit. IWH4 and IWH5 series holders also have closed bottom butwill store tool with bit attached.
• Offers the maximum in space efficiency.
• Fits virtually all aerial buckets.
• New! Non-fiberglass construction of semi-flexible polymer material.
• Won't Bloom like fiberglass; eliminates cuts, scratches and irritationassociated with fiberglass.
• Excellent dielectric, cold weather, chemical resistance and U.V. properties.
• Field reversible left or right.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
NOITPIRCSED EDISTUOTNUOM
EDISNITNUOM
STIFEELNEERG
STIFYDNRUB
STIFYELNATS
ylnohcnerwstifpeed"01 HWI I-HWI SEY SEY ON
tekcarbepytpilc"2/12htiwledoMHWI A/N 800912 SEY SEY ON
dehcattatekcoshtiwhcnerwstif,peeD"31 2HWI I-2HWI SEY SEY SEY
tibrofretsloHpeeD"91detargetnisedulcnitubelyts2HWIsaemaS 3HWI I-3HWI SEY SEY SEY
dehcattatibhtiwhcnerwstif,ledomediw,peeD"72 4HWI I-4HWI SEY SEY SEY
tibrofretsloHpeeD"91detargetnisedulcnitub,elyts4HWIsaemaS 900912 110912 SEY SEY SEY
dehcattatibhtiwhcnerwstif,peeD"92 5HWI I-5HWI SEY SEY ON
tibrofretslohpeed"91detargetnisedulcnitub,elytsHWIsaemaS 6HWI I-6HWI SEY SEY ON
redloHrepmirCydnruB 820912 SEY
524KEtnomriaFrofredloH 440912 920912
gnoL,redloHlooTyrettaB 030912
dnahtR,peedartx,retsloHhcnerWtcapmI 430912
deR,redloHlooTenilnItoirtaP 730912
)srolocrehtonielbaliava(wolleY,redloHenilnI 830912
eulB,redloHenilnI 930912
MODEL #219029
MODEL #219030
MODEL #219039
BUCKET ENHANCEMENTS
MODEL # HTR-1
Bucket Mounted Heater
FORM # 2014-C Rev B 5/07Copyright 2007
HEATERSFOR AERIAL PLATFORMS AND TENTS
Designed to mount inside any aerial lift bucket -whether its shape is square, rectangular, or round.Louvered vents on unit’s face direct heat downward.Can be wall-mounted as well. Auto shut-off activatesif the unit tips in any direction. Waterproof cord,grommets and rubber covered switches are standard.
Metal housing is cool to the touch.
For tent, platform, or garage heating needs. Wire meshface protects heating elements. Auto shut-off activatesif the unit tips in any direction. Waterproof cord,grommets and rubber covered switches are standard.Metal housing is cool to the touch.
Tent Heater
PLASTIC TECHNIQUES, INC.
LEDOM 1-RTH 2-RTH
noitpircseD retaehdetnuomtekcuB retaeHtneT
snoisnemiD "57.3x"57.5x"5.6 "57.5x"5x"57.3
egatloV CAV511 CAV511
spmA A3otsecuderA31 A3otsecuderA31
sttaW 053otsecuder0051 053otsecuder0051
sUTB xam0025 xam0025
droC teef8 teef8
thgieW sbl5 sbl5
MODEL # HTR-2
HEATERSFOR AERIAL LIFT PLATFORMS
Ideal for Telephone Splicer trucks, Cable TV Splicertrucks, Bridge Inspection trucks, and all non-insulated bucket applications.
Window Defogging/Defrosting
LEDOM 06-RTH 07-RTH
noitiprcseD ehtfotuodetceridsiwolfriAetalprotcelfedybmottob
ehtfotuodetceridsiwolfriAetalprotcelfedybmottob
snoisnemiD "52.3x"01x"8 "52.3x"01x"8
egatloV CAV511 CAV032
spmA 5.31 52.6
sttaW 0051 0051
selcyC ZH06 ZH06/05
sUTB 0005 0005
droC .tf8 .tf8
thgieW .sbl3 .sbl3MODEL # HTR-60
BUCKET ENHANCEMENTS
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
FORM #3120-C 5/07Copyright 2007
B.A.S.S.Universal Bracket System
AVAILABLE FOR "B.A.S.S. SYSTEM"
Tool Trays
Organizers
Chain Saw Scabbards
Crimper Head Holders
Litebox Holders
Impact Wrench Holders
Hardware Trays and more...
Use one "B.A.S.S. Bracket" and interchange your Plastic Techniques basketa c c e s s o r i e s .
STEP 1: Clip the "B.A.S.S. Bracket" over thelip of your basket and leave it.
STEP 2: Lock on different accessories asneeded.
PLASTIC TECHNIQUES, INC.
The
BUCKET ENHANCEMENTS
PTI M ODEL # DESCRIPTION
818001 B.A.S.S. Mounting Unit
818010 Vinyl Tool Apron for use with B.A.S.S.
818020 TO-1C Tool Organizer Board for use with B.A.S.S.
818040 319018 Tool Tray for use with B.A.S.S.
818050 LBH2-Y Litebox Holder for use with B.A.S.S.
818060 PCP-2 Compression Tool Holder for use with B.A.S.S.
818070 IWH-R Impact Wrench Holder for use with B.A.S.S.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
FORM #0004-C Rev B 5/07Copyright 2007
• Lid Series Configuration
• Tru-Fit Lids
• "Fit All" Soft CoversSoft Covers - No Foam
— SECTION 2 —BUCKET COVERS & LIDS
PTI covers and lids provide weather protection for aerial baskets. Seal youraerial basket with either our Soft Covers or Hard Covers.
The Soft Covers are double sided for double the life. The foam creates asemi rigid profile that allows water to run-off, yet can be comfortablystored.
The Hard Covers provide rigid protection for snow and ice build up. Con-structed of rugged polyethylene with U.V. inhibitor added. These lids arelight weight yet are strong and impact resistant.
The No Foam Soft Covers offer a light weight weather resistant seal for yourbucket. Constructed of the same quality materials as our Soft Covers withfoam.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
Click on an item or scroll down to browse this section.
FORM # 3017-C Rev.C 5/07Copyright 2007
MODEL #5F48-X
MODEL #5TD48
MODEL #5A48
MODEL #5F48
No CrossStraps
NOTE: CrossStraps
MODEL #5F48-C
No CrossStraps
NOTE: CrossStraps
NOTE: CrossStraps
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
MODEL #RA50
safetylanyard
MODEL #28DH-X
NOTE: Two wayadjustable strap
NOTE: Cross Strap
MODEL #5A48-FSP
NOTE: CrossStrap
BUCKET COVERS & LIDS
LID SERIES CONFIGURATIONS
TRU-FIT LIDSShaped to shed ice and snow.
Easy on and off by one person.
Strap buckle or snap cord closure.
Fits permanently: No shrinking, sagging or tearing.
Replacement Strap Sets are available. For model numbers refer to Replacement Parts at end of Tools & ToolTrays section.
MODEL #5A48
FORM #3016-C Rev. G 5/07Copyright 2007
MODEL #: 5A30
These rigid, tough, polyethylene covers seal your bucket against driving rain, ice and snow.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
BUCKET COVERS & LIDS
PTIM ODEL # AERIAL LIFT M FR. SHAPE
M AXIM UMBUCKET RIML x W
28L32VERSALIFT, ALTECHI-RANGER, HOLAN,LIFTALL, TEL-E-LECT
RECTANGLE 28 x 32
28DH-X DIGGERDEREK,w/shaft and brake cover SQUARE 29.5 x 29.5
2L28S HO LAN, ALTEC, TEL-E-LECT SQUARE 29.5 x 29.5
2L28N SAME AS ABOVE BUT WITH WEBBING
2W28S ASPLUNDH 6-SIDED 32.5 x 29
2W46N PITMAN 6-SIDED 29.5 x 27.5
30L34 ALTEC, ASPLUNDH,TEL-E-LECT RECTANGLE 30 x 34
411036 VARIOUS RECTANGLE 28 x 32
411037 VARIOUS RECTANGLE 30 x 34
411038 VARIOUS SQUARE 29.5 x 29.5
411039 REACH-ALL D-SHAPED 44 x 63
411041 VARIOUS RECTANGLE 53 x 30
411042 VARIOUS RECTANGLE 53 x 30
5A30 ALTEC (24 x 30) RECTANGLE 32.5 x 26.5
5A48 ALTEC RECTANGLE 50.5 x 28
5A48-FSP TEL-E-LECT W/CONTROLCOVER RECTANGLE 59.5 x 27.25
5F30 HI-RANGER (24 x 30) RECTANGLE 32.5 x 26.5
5F38 HI-RANGER RECTANGLE 40 x 26
5F48 HI-RANGER RECTANGLE 50.5 x 27
5F48-X HI-RANGER RECTANGLE 50.5 x 27
5TD48 HI-RANGER RECTANGLE 50.5 x 28
6HT-C HI-RANGER KIDNEY 61 x 36
6TV TECO KIDNEY 61 x 37.5
FB701* REACHALL OVAL
RA50 REACH-ALL 6-SIDED 54.5 x 33
10A96 HI-RANGER RECTANGLE 62.5 x 28.5
"FIT ALL" SOFT COVERS
Designed for use on aerial lift bucket trucks
The FITALL-I, FITALL-V, FITALL-II and FITALL-K were designed to shed water. A 2" piece of foam is sewn into the coverto create a domed effect to eliminate puddling. The FITALL-II covers have two light weight reinforcing dowels.The same heavy duty vinyl coated nylon is used on the underside of the cover, so that it is reversible and gives you twicethe life.For those customers interested in the soft cover without the foam fill, they are available in the chart below. The modelnumbers with the suffix “NF” refers to No Foam.
FITALL NFI
FORM #3015-C Rev. C 5/07Copyright 2007
Made of a heavy duty vinyl coated nylon.
Available in black, safety yellow, safety orange, and white.
4' lanyard with a brass swivel.
Layered 55-45 to reduce wind-whip.3/4" elastic rope sewn into the hem.
Available to fit virtually any size tray or bucket.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
F I T A L L - I
BUCKET COVERS & LIDS
PTI MODEL # DESCRIPTION
FITALL-I Fits 24 x 24 Buckets
FITALL-II Fits 24 x 48 Buckets
FITALL-V Fits 24 x 30 Buckets
FITALL-K Fits Hi-Ranger and Teco kidney styles
FITALL-NFI Single man cover/No Foam
FITALL-NFII Two man cover/No Foam
1TB-SCT Soft cover for 1TB, 3TB, CTB 20TB
FITALL-IBC Fits 24 x 24 Buckets with Brake cover
FITALL-NFV Fits 24 x 30 Bucket/ No foam
410001 Soft Cover w/Foam for Basket & control guard
410016 Soft Cover black for 2TB, 1TB-RA, 5DTB, 7DTB, 8DTB
410018 Soft Cover WMTB Tool Tray
410019 1 1/2 Man w/Foam & attached control cover 24x30
410020 Oversized 2 man with foam 58 x 36
410021 Control Cover with lanyard 15 x 9
410022 Same as FITALL-R without control cover
410023 Soft Cover Oversized 1 1/2 man, yellow, no foam
410031 Soft Cover, black for 2TB w/table top
410033 Soft Cover, Foam, 32"x26", Yellow, fits control cover
410034 Soft Cover semi-oval tool tray
FORM #1012-C Rev C 5/07Copyright 2007
• PTI utilizes a specially formulated low density polyethylene that hasdemonstrated superior resistance to cold weather problems.
• PTI’s resin can be identified by a tinge of yellow resulting from the use ofan ultra-violet inhibitor that reduces sunlight degradation.
• Dielectrically Tested, Certified and Guaranteed.
• Molded from specially blended linear low density polyethylene for durableconstruction.
• All liners are made and tested to withstand 50kv AC/RMS for 1 minute.
• A two year guarantee on all liners.
• Liners with molded step provide safety and convenience when exiting buckets.
• Liners with molded steps are identified by an “S” at the end of the PTI ModelN u m b e r .
• 70kv available, call for details.
• Color code available, call for details.
• Liners tested to the ANSI 92.2 and CSA C225-M88 standards.
• When shipped liners meet and/or exceed the ANSI 92.2 and CSA C225-M88.
— SECTION 3 —BUCKET LINERS
2 Safe Bucket Liners McCabe
PTI Liners with Molded Step PITMAN
ALTEC REACH-ALL
ASPLUNDH RO
BAKER TECO
HI-RANGER TEL-E-LECT
HOLAN TIME/VERSALIFT
LIFT-ALL UTILITY BODY
VARIOUS MANUFACURERS Arial Lift • Hunt-Pierce • Dur-A-Lift • Skyworker
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
Designed for use on aerial lift bucket trucks
Click on an item or scroll down to browse this section.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
PTI IS PROUD TO INTRODUCE THE LINER!
From the company with over 30 years of innovation experience, the liner provides an added level of user support and safety. By providing visible indication of wear, daily inspections are more accurate and easier to perform. In the lab, the savings in time are obvious. Find the holes before the electrical stage of in-service retesting! Our liners feature two distinct color layers which are molecularly bonded during the molding process. In effect, our liners are a single layer with two color strata that cannot separate. The main color (outside and thicker) has been designed and tested to pass required periodic retests, the secondary color (inside and thinner) is a wear layer designed to make it easy for crews to do daily visual inspections of this safety equipment. A dangerously worn or gouged inner liner wall will show the outer/main color, indicating a possible unsafe condition. This liner should then be replaced and retested according to each individual company’s work practices.
liners carry the standard PTI warranty.
Copyright 04/2007 Form 2safe
PTI 2Safe 50kv Liner
Designed for use on aerial lift bucket trucks
BUCKET LINERS
Designed for use on aerial lift bucket trucks:
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
FORM #1016-C Rev. E 5/07Copyright 2007
LINER SPECIFICATIONS
* Choose 5A48, 5F48, or 5TD48 Configuration
BUCKET LINERS WITH MOLDED STEPSometimes the easiest solution to a problem is to avoid the conditionswhich lead to the problem. That’s why at PTI we build bucketliners with a molded step. By ordering your liner with abuilt-in molded step you avoid difficulties in exiting thebucket before they occur. You also avoid the “fit” problems ofremovable steps ordered at a later date. So why not avoidproblems before they occur... order your next liner with abuilt-in molded step.
At PTI we are always adding new liners with molded steps. So ifyou don’t see your liner listed here, then give our SalesDepartment a call at 603-645-6800. Remember, at PTI we arealways bending over backwards to meet our customers’ needs!
BUCKET LINERS
P T IM O D E L # M F G . S H A P E D I M E N S I O N S I N I N C H E S
( a s a b o v e )
N O . -P E RB O X
P T I A C C E S S O R Y I T E M S
- - - - - - - - - - - - - - - - - - - - - - - - - - A B C D E - - - - - - L I D S S C U F FP A D S
S c u f f P a d sw /s t e p
A - 2 8 S A L T E C R e c t . 4 1 2 8 2 2 2 1 2 7 1 2 8 L 3 2 /5 F 3 0 D - 2 8 - N D S - 8
A - 3 0 S A L T E C R e c t . 4 1 2 9 2 3 2 1 2 7 2 2 8 L 3 2 5 1 2 0 0 1 D S - 3 2 A
A - 3 9 S A L T E C S q u a r e 3 9 2 4 2 4 2 2 2 2 3 2 L 2 8 D - 2 1 - N D S - 4
A - 4 7 S A L T E C S q u a r e 4 2 2 3 . 5 2 3 . 5 2 1 . 5 2 1 . 5 3 2 L 2 8 D - 2 1 - N D S - 6
A - 4 8 S A L T E C R e c t . 4 2 4 6 . 5 2 2 . 5 2 1 . 5 4 5 . 5 1 * D - 4 6 - N D S - 1 1
A L - 4 1 S A L T E C S q u a r e 4 2 2 4 2 4 2 1 2 1 4 2 L 2 8 D - 2 0 - N D S - 1
A T - 3 0 S A L T E C R e c t . 3 9 2 9 . 5 2 3 5 2 1 2 7 5 3 0 L 3 4 D - 2 6 - N D S - 8
D L - 4 2 S D U R - A - L I F T S q u a r e 4 2 2 4 2 4 2 1 2 1 4 2 L 2 8 D - 2 0 - N D S - 1
H - 3 0 S H O L A N R e c t . 4 0 2 8 . 5 2 2 . 5 2 1 2 7 2 2 8 L 3 2 D - 2 6 - N D S - 3 3
H - 4 2 S H O L A N S q u a r e 4 2 2 4 2 4 2 1 2 1 4 2 L 2 8 D - 2 0 - N D S - 1
H - 8 8 S H O L A N R e c t . 4 1 2 8 2 2 2 1 2 7 1 5 F 3 0 D - 2 6 - N D S - 8
L - 4 1 S L I F T - A L L S q u a r e 4 2 2 4 2 4 2 1 2 1 4 2 L 2 8 D - 2 0 - N D S - 1
L A - 2 8 S L I F T - A L L R e c t . 4 1 2 8 2 2 2 1 2 7 1 2 8 L 3 2 /5 F 3 0 D - 2 6 - N D S - 8
L A - 4 6 S L I F T - A L L R e c t . 4 1 4 6 2 2 2 1 2 7 1 * D - 4 6 - N D S - 1 1
M S - 4 7 S M c C A B E S q u a r e 4 2 2 4 2 4 2 2 2 2 3 2 L 2 8 D - 2 1 - N D S - 6
P - 4 7 S P I T M A N S q u a r e 4 2 2 3 2 3 2 2 2 2 3 2 L 2 8 D - 2 1 - N D S - 6
R - 2 8 S H I - R A N G E R R e c t . 4 1 2 8 2 2 2 1 2 7 1 2 8 L 3 2 /5 F 3 0 D - 2 6 - N D S - 8
R - 4 8 S H I - R A N G E R R e c t . 4 1 4 6 2 2 2 1 4 5 1 * D - 4 6 - N D S - 1 1
R O - 4 7 S R O S q u a r e 4 2 2 3 2 3 2 2 2 2 3 2 L 2 8 D - 2 1 - N D S - 6
R U - 4 1 S R E A C H A L L S q u a r e 4 2 2 4 2 4 2 1 2 1 4 2 L 2 8 D - 2 0 - N D S - 1
T - 3 9 S T E L - E - L E C T S q u a r e 3 9 2 4 2 4 2 2 2 2 4 2 L 2 8 D - 2 1 - N D S - 4
T - 4 2 S T E L - E - L E C T S q u a r e 4 2 2 3 2 3 2 2 2 2 3 2 L 2 8 D - 2 1 - N D S - 6
T E - 2 8 S T E C O R e c t . 4 1 2 8 2 2 2 1 2 7 1 2 8 L 3 2 /5 F 3 0 D - 2 6 - N D S - 8
T E - 4 1 S T E C O S q u a r e 4 2 2 4 2 4 2 1 2 1 4 2 L 2 8 D - 2 0 - N D S - 1
T M - 4 1 S T I M E /V E R S A L I F T S q u a r e 4 2 2 4 2 4 2 1 2 1 4 2 L 2 8 D - 2 0 - N D S - 1
T M - 4 2 S T I M E /V E R S A L I F T S q u a r e 4 2 2 3 2 3 2 2 2 2 2 2 L 2 8 D - 2 1 - N D S - 6
U - 4 2 S U T I L B O D Y S q u a r e 4 2 2 3 2 3 2 2 2 2 3 2 L 2 8 D - 2 1 - N D S - 6
ALTEC
A is measured fromthe bottom of therim to the base ofthe liner.B & C measurementsare taken one inchdown from beneaththe lip, on theoutside of thel i n e r .
NOTE: All dimen-sions shown in chartbelow refer to theOUTSIDE of theliner, or INSIDE ofthe bucket. Allmeasurements arerounded to the near-est half inch.
D & E measurementsare taken threeinches up from thebottom, on theoutside of theliner. This elimi-nates distortiondue to the radiusof the corners.
Designed for use on aerial lift bucket trucks made by:
LINER SPECIFICATIONS
S = Liner with Molded Step FORM #1000-C ALTEC Rev.G 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
ITP#LEDOM
S'.GFMEDOC EPAHS SEHCNINISNOISNEMID
)evobasa(
REP.ONXOB SMETIYROSSECCAITP
----------- ----------- ----------- A B C D E ----------- SDIL FFUCSSDAP
SDAPFFUCSSPETSHTIW
82-A 55002-407 .tceR 14 82 22 12 72 2 03A5/23L82 82-D A8-SD/8-SD
S82-A 25602-407 .tceR 14 82 22 12 72 2 03A5/23L82 N-82-D 8-SD
03-A 81702-407 .tceR 14 92 32 12 72 2 23L82 62-D A23-SD/23-SD
S03-A 24012-407 .tceR 14 92 32 12 72 2 23L82 100215 A23-SD
93-A 50202-407 erauqS 93 42 42 22 22 4 82L2 12-D 6-SD
S93-A ________ erauqS 93 42 42 22 22 3 82L2 N-12-D 4-SD
74-A _____CO erauqS 24 5.32 5.32 5.12 5.12 4 82L2 12-D 6-SD
S74-A _____CO erauqS 24 5.32 5.32 5.12 5.12 3 82L2 N-12-D 6-SD
84-A 35002-407 .tceR 24 5.64 5.22 5.12 5.54 1 84A5 64-D A11-SD/11-SD
S84-A 57602-407 .tceR 24 5.64 5.22 5.12 5.54 1 84A5 N-64-D 11-SD
94-A 37002-407 ediS-6 24 5.42 42 12 12 3 64W2 32-D 52-SD
14-LA56302-40773102-40730002-407
erauqS 24 42 42 12 12 4 82L2 02-D 1-SD
S14-LA 88602-407 erauqS 24 42 42 12 12 4 82L2 N-02-D 1-SD
03-TA 82502-407 .tceR 93 592 5.32 12 72 5 43L03 62-D A8-SD/8-SD
S03-TA ________ .tceR 93 5.92 5.32 12 72 5 43L03 N-62-D 8-SD
BUCKET LINERS
A is measured fromthe bottom of therim to the base ofthe liner.B & C measurements are takenone inch down from beneath thelip, on the outside of the liner.
NOTE: All dimen-sions shown inchart below referto the OUTSIDE ofthe liner, or IN-SIDE of the bucket.All measurementsare rounded to thenearest half inch.
D & E measurementsare taken threeinches up from thebottom, on theoutside of theliner. This elimi-nates distortiondue to the radiusof the corners.
LINER SPECIFICATIONS
FORM #1001-C ASPLUNDH Rev. E 5/07Copyright 2007
Designed for use on aerial lift bucket trucks made by:
ASPLUNDH
* 2L28 Fits without controls, 2W28 fits with controls.S = Liner with molded step
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
BUCKET LINERS
PTIM O D EL #
M FG.'SC O D E S H A PE D IM EN S IO N S IN IN C H ES
(as above )
N O .PERB O X PTI A CC ES S O RY ITEM S
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A B C D E - - - - - - - - - - -- - LID S S CU FF
PAD SS CU FF PAD SW ITH S TEPS
A - 40 02 6-0315LB S tyle S quare 40 24 24 2 1 21 4 2W 28*
2L28* D - 2 0 D S - 2
AT- 20 A splundh Rect. 39 23 .5 20 1 8 22 4 F ITALL- I D -2 4 D S -9
AT- 30 141-0211- 02 Rect. 39 29 .5 23 .5 2 1 27 5 30l34 D -2 6 D S -8
AT-3 0S 141-0211- 02 Rect. 39 29 .5 23 .5 2 1 27 5 30l34 D -26-N D S -8
NOTE: All dimen-sions shown inchart below referto the OUTSIDE ofthe liner, or IN-SIDE of the bucket.All measurementsare rounded to thenearest half inch.
D & E measurementsare taken threeinches up from thebottom, on theoutside of theliner. This elimi-nates distortiondue to the radiusof the corners.
A is measured from thebottom of the rim tothe base of the liner.B & C measurements aretaken one inch downfrom beneath the lip,on the outside of thel i n e r .
FORM #1020-C Baker Rev.B 5/07Copyright 2007
Designed for use on aerial lift bucket trucks made by:
BAKER
LINER SPECIFICATIONSLINER SPECIFICATIONS
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
BUCKET LINERS
PTIM ODEL #
M FG.'SCODE
SHA-PE DIM ENSIONS IN INCHES
(as above)
NO.PERBOX PTI ACCESSORY ITEM S
----------- -------- ------- A B C D E ------------ LIDS SCUFFPADS
SCUFF PADSWITH STEPS
BU-59 BAKER Square 39 23.5 23.5 20 20 4 2L28 D-19 DS-15
B-50 BAKER Kidney 42 54 25 23.5 52 1 ---- ---- ----
HI-RANGER
A is measured from thebottom of the rim to thebase of the liner.B & C measurements aretaken one inch down frombeneath the lip, on theoutside of the
NOTE: All dimensionsshown in chart below referto the OUTSIDE of theliner, or INSIDE of thebucket. All measurementsare rounded to the nearesthalf inch.
D & E measurements aretaken three inches upfrom the bottom, on theoutside of the liner.This eliminates distor-tion due to the radiusof the corners.
LINER SPECIFICATIONS
* Choose 5A48, 5F48, or 5TD48 Configuration, please see catalog section 2 for details.S= Liner with Molded Step
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
FORM #1002-C HI-RANGER REV.G 5/07Copyright 2007
ITP#LEDOM
S'.GFMEDOC EPAHS SEHCNINISNOISNEMID
)evobasa(
REP.ONXOB SMETIYROSSECCAITP
----------- ----------- ----------- A B C D E ---------- SDIL FFUCSSDAP
SDAPFFUCSSPETSHTIW
22-R .C.O .tceR 14 42 02 81 22 3 I-LLATIF 43-D 01-SD
42-R E4/04F4 erauqS 14 22 22 12 12 2 I-LLATIF 02-D 41-SD
82-R 25iF5 .tceR 14 82 22 12 72 2 03F5/23L82 82-D A8-SD/8-SD
S82-R 25iF5 .tceR 14 82 22 12 72 2 03F5/23L82 N-82-D 8-SD
83-R 53F4 .tceR 14 63 22 12 53 1 83F5 83-D 91-SD
84-R 84iF5/DT5 .tceR 14 64 22 12 54 1 * 64-D A11-SD/11-SD
S84-R 84iF5/DT5 .tceR 14 64 22 12 54 1 * N-64-D 11-SD
66-R DT6 yendiK 24 75 03 92 65 1 C-TH6 GF66-D 82-SD
66-R DT6/VHE6maof-non yendiK 24 65 03 82 45 1 C-TH6 86-D 92-SD
Designed for use on aerial lift bucket trucks made by:
BUCKET LINERS
FORM #1003-C HOLAN Rev.F 5/07Copyright 2007
HOLAN
Designed for use on aerial lift bucket trucks made by:
A is measured from thebottom of the rim to thebase of the liner.B & C measurements aretaken one inch down frombeneath the lip, on theoutside of the liner.
D & E measurements aretaken three inches upfrom the bottom, on theoutside of the liner.This eliminates distor-tion due to the radius ofthe corners.
NOTE: All dimensionsshown in chart belowrefer to the OUTSIDE ofthe liner, or INSIDE ofthe bucket. All measure-ments are rounded to thenearest half inch.
LINER SPECIFICATIONS
*The H-18 HOLAN Liner is an undersized H-28 style intended to fit older repairedbuckets or undersized buckets which may be still in use. It is advisable to checkdimensions before ordering this liner style.
S = Liner with Molded Step
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
ITP#LEDOM
S'.GFMEDOC EPAHS SEHCNINISNOISNEMID
)evobasa(
REP.ONXOB SMETIYROSSECCAITP
----------- ----------- ----------- A B C D E ----------- SDIL FFUCSSDAP
SDAPFFUCSSPETSHTIW
*81-H wolebeeS erauqS 5.83 5.22 5.22 12 12 2 I-LLATIF 02-D 02-SD
82-H 32-7008 erauqS 5.83 32 32 22 22 2 82L2 12-D 5-SD
03-H 05-7008 .tceR 04 5.82 5.22 12 72 2 23L82 62-D A8-SD/8-SD
S03-H NALOH .tceR 04 5.82 5.22 12 72 2 23L82 N-62-D 33-SD
83-H 83-7008 erauqS 83 42 42 32 32 3 82L2 22-D 71-SD
93-H 93-7008 erauqS 93 42 42 32 32 2 82L2 22-D 81-SD
24-H 24-7008 erauqS 24 42 42 12 12 4 82L2 02-D 1-SD
S24-H 24-7008 erauqS 24 42 42 12 12 4 82L2 N-02-D 1-SD
05-H 84-7008 .tceR 24 74 32 12 54 1 05AR 64-D A21-SD/21-SD
S88-H NALOH .tceR 14 82 22 12 72 2 /23L8203F5 N-82-D 8-SD
88-H 54-7008 .tceR 14 82 22 12 72 2 /23L8203F5 82-D A8-SD/8-SD
BUCKET LINERS
NOTE: All dimensionsshown in chart belowrefer to the OUTSIDE ofthe liner, or INSIDE ofthe bucket. All measure-ments are rounded to thenearest half inch.
D & E measurements aretaken three inches upfrom the bottom, on theoutside of the liner.This eliminates dis-tortion due to theradius of the corners.
A is measured from thebottom of the rim to thebase of the liner.B & C measurements aretaken one inch down frombeneath the lip, on theoutside of the liner.
LIFT - ALL
LINER SPECIFICATIONS
FORM #1018-C Lift-All Rev.E 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
* Choose 5A48, 5F48, or 5TD48 Configuration, please see catalog section 2 for details.S= Liner with Molded Step
ITP#LEDOM
S'.GFMEDOC EPAHS SEHCNINISNOISNEMID
)evobasa(
REP.ONXOB SMETIYROSSECCAITP
----------- ----------- ----------- A B C D E ----------- SDIL FFUCSSDAP
SDAPFFUCSSPETSHTIW
14-L llA-tfiL erauqS 24 42 42 12 12 4 82L2 02-D 1-SD
S14-L llA-tfiL erauqS 24 42 42 12 12 4 82L2 N-02-D 1-SD
64-AL llA-tfiL .tceR 14 64 22 12 54 1 * 64-D A31-SD/31-SD
S64-AL llA-tfiL .tceR 14 64 22 12 54 1 * N-64-D 31-SD
82-AL llA-tfiL .tceR 14 82 22 12 72 2 03F5/23L82 82-D A8-SD/8-SD
S82-AL llA-tfiL .tceR 14 82 22 12 72 2 03F5/23L82 N-82-D 8-SD
Designed for use on aerial lift bucket trucks made by:BUCKET LINERS
LINER SPECIFICATIONS
A is measured from thebottom of the rim to thebase of the liner.B & C measurements aretaken one inch down frombeneath the lip, on theoutside of the liner.
D & E measurements aretaken three inches upfrom the bottom, on theoutside of the liner.This eliminates distor-tion due to the radiusof the corners.
NOTE: All dimensionsshown in chart below referto the OUTSIDE of theliner, or INSIDE of thebucket. All measurementsare rounded to the nearesthalf inch.
FORM #1004-C McCABE Rev.D 5/07Copyright 2007
McCABE
S = Liner with molded step
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
ITP#LEDOM
S'.GFMEDOC EPAHS SEHCNINISNOISNEMID
)evobasa(
REP.ONXOB SMETIYROSSECCAITP
----------- ----------- ----------- A B C D E ----------- SDIL FFUCSSDAP
SDAPFFUCSSPETSHTIW
93-SM ----------- erauqS 93 32 32 02 02 4 82L2 91-D 12-SD
04-SM 9-NWC erauqS 93 32 32 02 02 4 82L2 91-D 12-SD
14-SM 01-NWC11-NWC erauqS 24 32 32 91 91 4 82L2 81-D 22-SD
34-SM 41-NWC edis-6 24 5.32 5.12 5.02 5.12 2 34W2 34-D 32-SD
74-SM ----------- erauqS 24 42 42 22 22 3 82L2 12-D 6-SD
S74-SM ----------- erauqS 24 42 42 22 22 3 82L2 N-12-D 6-SD
Designed for use on aerial lift bucket trucks made by:
BUCKET LINERS
LINER SPECIFICATIONS
NOTE: All dimensions shownin chart below refer tothe OUTSIDE of the liner,or INSIDE of the bucket.All measurements arerounded to the nearesthalf inch.
D & E measurements are takenthree inches up from thebottom, on the outside ofthe liner. This eliminatesdistortion due to the radiusof the corners.
PITMAN
A is measured from thebottom of the rim to thebase of the liner.B & C measurements aretaken one inch down frombeneath the lip, on theoutside of the liner.
FORM #1005-C PITMAN Rev.D 5/07Copyright 2007
S = Liner with Molded Step
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
ITP#LEDOM
S'.GFMEDOC EPAHS SEHCNINISNOISNEMID
)evobasa(
REP.ONXOB SMETIYROSSECCAITP
----------- ----------- ----------- A B C D E ----------- SDIL FFUCSSDAP
SDAPFFUCSSPETSHTIW
54-P ----------- .tceR 83 42 91 5.71 5.02 4 I-LLATIF GF54-D 42-SD
64-P 1-NB0480-53-870 edis-6 24 32 42 5.91 02 3 N64W2 32-D R7-SD/L7-SD
74-P 6-NB erauqS 24 32 32 22 22 3 82L2 12-D 6-SD
S74-P 6-NB erauqS 24 32 32 22 22 3 82L2 N-12-D 6-SD
94-P WP6ITP edis-6 24 42 5.42 12 12 3 N64W2 32-D R52-SD/L52-SD
25-P NM2550-94-870 yendiK 24 55 42 22 25 1 A/N GF25-D 62-SD
Designed for use on aerial lift bucket trucks made by:
BUCKET LINERS
FORM #1006-C REACH-ALL Rev. D 5/07Copyright 2007
NOTE: All dimensionsshown in chart belowrefer to the OUTSIDE ofthe liner, or INSIDE ofthe bucket. All mea-surements are roundedto the nearest halfi n c h .
D & E measurements aretaken three inches upfrom the bottom, on theoutside of the liner.This eliminates distor-tion due to the radiusof the corners.
A is measured from thebottom of the rim to thebase of the liner.B & C measurements aretaken one inch down frombeneath the lip, on theoutside of the liner.
LINER SPECIFICATIONS
REACH-ALL
S = Liner with molded Step
The manufacturer's code numbers listed above are the part numbers of theaerial baskets in which PTI liners fit.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
ITPLEDOM
#
S'.GFMEDOC EPAHS SEHCNINISNOISNEMID
)evobasa(
REP.ONXOB SMETIYROSSECCAITP
----------- ----------- ----------- A B C D E ----------- SDIL FFUCSSDAP
SDAPFFUCSSPETSHTIW
05-ER 001178 .tceR 24 74 32 12 54 1 05AR 64-D A21-SD/21-SD
14-UR 617163 erauqS 24 42 42 12 12 4 82L2 02-D 1-SD
S14-UR llA-hcaeR erauqS 24 42 42 12 12 4 82L2 N-02-D 1-SD
95-UR 000178 erauqS 93 5.32 5.32 02 02 4 82L2 91-D 51-SD
Designed for use on aerial lift bucket trucks made by:
BUCKET LINERS
NOTE: All dimensionsshown in chart belowrefer to the OUTSIDE ofthe liner, or INSIDE ofthe bucket. All measure-ments are rounded to thenearest half inch.
D & E measurements aretaken three inches upfrom the bottom, on theoutside of the liner.This eliminates distor-tion due to the radiusof the corners.
A is measured from thebottom of the rim to thebase of the liner.B & C measurements aretaken one inch down frombeneath the lip, on theoutside of the liner.
FORM #1019-C RO Rev.C 5/07Copyright 2007
RO
LINER SPECIFICATIONS
S=Liner with molded Step
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
ITP#LEDOM
S'.GFMEDOC EPAHS SEHCNINISNOISNEMID
)evobasa(
REP.ONXOB SMETIYROSSECCAITP
----------- ----------- ----------- A B C D E ----------- SDIL FFUCSSDAP
SDAPFFUCSSPETSHTIW
74-OR OR erauqS 24 32 32 22 22 3 82L2 12-D 6-SD
S74-OR OR erauqS 24 32 32 22 22 3 82L2 N-12-D 6-SD
94-OR OR dedis-6 24 5.42 42 12 12 3 64W2 32-D 52-SD
Designed for use on aerial lift bucket trucks made by:
BUCKET LINERS
LINER SPECIFICATIONS
A is measured from thebottom of the rim to thebase of the liner.
B & C measurements aretaken one inch down frombeneath the lip, on theoutside of the liner.
D & E measurements aretaken three inches up fromthe bottom, on the outsideof the liner. This elimi-nates distortion due to theradius of the corners.
FORM #1007-C TECO Rev.E 5/07Copyright 2007
TECO
TE-67 - this converts the walk through to 13 inches.
* Choose 5A48, 5F48, or 5TD48 Configuration, please see catalog section 2 for details.S= Liner with Molded Step
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
NOTE: All dimensionsshown in chart belowrefer to the OUTSIDE ofthe liner, or INSIDE ofthe bucket. All measure-ments are rounded to thenearest half inch.
PTIM O D EL #
M FG.'SC O D E S H APE D IM EN S IO N S IN IN CH ES
(as above )
N O .PERB O X PTI ACC ES S O R Y ITEM S
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A B C D E - - - - - - - - - - - LID S S CUFFPAD S
SC UFF PAD SW ITH S TEPS
TE-28 TEC O Rect. 41 28 22 21 27 2 28L32/5F 30 D- 28 DS - 8/DS - 8A
TE-28S TEC O Rect. 41 28 22 21 27 2 28L32/5F 30 D-28-N DS - 8
TE- 41 TEC O Square 42 24 24 21 21 4 2L28 D- 20 DS -1
TE-41S TEC O Square 42 24 24 21 21 4 2L28 D-20-N DS -1
TE-67 TEC O K idneyRound F ront 42 57 18 18 56.5 1 6TV N /A DS - 31
TE-48 TEC O Rect. 41 46 22.5 21 45 1 * D- 46 DS -11/DS - 11A
TE-48S TEC O Rect. 41 46 22.5 21 45 1 * D-46-N DS -11
TE-54 TEC O K idneyRound F ront 42 54 31 .5 30 52 1 F B601B - - - - - DS -44
Designed for use on aerial lift bucket trucks made by:
BUCKET LINERS
LINER SPECIFICATIONS
NOTE: All dimensionsshown in chart belowrefer to the OUTSIDE ofthe liner, or INSIDE ofthe bucket. All mea-surements are roundedto the nearest halfi n c h .
D & E measurements aretaken three inches upfrom the bottom, on theoutside of the liner.This eliminates distor-tion due to the radiusof the corners.
A is measured from thebottom of the rim to thebase of the liner.B & C measurements aretaken one inch down frombeneath the lip, on theoutside of the liner.
FORM #1008-C TELELECT REV.F 5/07Copyright 2007
TEL-E-LECT
S= Liner with Molded Step
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
PTIM O D EL
#
M FG.'SCO D E S H APE D IM EN S ION S IN IN CH ES
(as above )
N O .PERB OX PTI ACCES S ORY ITEM S
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - A B C D E - - - - - - - - - - - LID S S CUFFPAD S
S CUFF PAD SW ITH S TEPS
T-20 BF B Rect. 39 23 .5 20 17.5 22 4 F ITALL-I D-24 DS - 9
T-28E - - - - - - - Rect. 41 28 22 21 27 2 28L32/5F 30 D-28 DS -8/DS - 8A
T-28ES HI-RAN GER Rect. 41 28 22 21 27 2 28L32/5F 30 D-28- N DS - 8
T-39 2677 S quare 39 24 24 22 22 4 2L28 D-21 DS - 6
T-39S 2677 S quare 39 24 24 22 22 4 2L28 D-21- N DS - 4
T-42 2678 S quare 42 23 23 22 22 3 2L28 D-21 DS - 6
T-42S 2678 S quare 42 23 23 22 22 3 2L28 D-21- N DS - 6
T-48 TEL-E-LEC T Rect. 42 47 22 21 46 1 - - - - - - D-46 DS - 11/DS -11A
T-30 TEL-E-LEC T Rect. 41 29 23 21 27 2 28L32/5F 30 D-26 DS -32/DS -32A
T-30S TEL-E-LEC T Rect. 41 29 23 21 27 2 28L32/5F 30 512001 DS - 32A
Designed for use on aerial lift bucket trucks made by:
BUCKET LINERS
LINER SPECIFICATIONS
NOTE: All dimensions shownin chart below refer to theOUTSIDE of the liner, orINSIDE of the bucket. Allmeasurements are rounded tothe nearest half inch.
D & E measurements aretaken three inches upfrom the bottom, on theoutside of the liner.This eliminates distor-tion due to the radiusof the corners.
A is measured from thebottom of the rim to thebase of the liner.B & C measurements aretaken one inch down frombeneath the lip, on theoutside of the liner.
TIME / VERSALIFT
FORM #1009-C TIME/VERSALIFT Rev.F 5/07Copyright 2007
S= Liner with Molded Step
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
ITPLEDOM
#
S'.GFMEDOC EPAHS SEHCNINISNOISNEMID
)evobasa(
REP.ONXOB SMETIYROSSECCAITP
----------- ----------- ----------- A B C D E ----------- SDIL FFUCSSDAP
SDAPFFUCSSPETSHTIW
42-MT 01RL .tceR 14 04 32 22 93 1 II-LLATIF GF04-D A67-SD/67-SD
82-MT 5RL/2-80098 .tceR 14 82 22 12 72 2 03F5/23L82 82-D A8-SD/8-SD
S82-MT tfilasreV/emiT .tceR 14 82 22 12 72 2 03F5/23L82 N-82-D 8-SD
93-MT 8RL/5-80098 erauqS 93 42 42 32 32 2 82L2 22-D 81-SD
04-MT 1-64098 yendiK 34 55 72 62 45 1 A/N A/N 61-SD
14-MT 1-80098 erauqS 24 42 42 12 12 4 82L2 02-D 1-SD
S14-MT tfilasreV/emiT erauqS 24 42 42 12 12 4 82L2 N-02-D 1-SD
24-MT 3RL erauqS 24 32 32 22 22 3 82L2 12-D 6-SD
S24-MT tfilasreV/emiT erauqS 24 32 32 22 22 3 82L2 N-12-D 6-SD
84-MT 9RL/6-80098 .tceR 24 74 22 12 64 1 ----- 64-D A11-SD/11-SD
Designed for use on aerial lift bucket trucks made by:
BUCKET LINERS
LINER SPECIFICATIONS
NOTE: All dimensionsshown in chart belowrefer to the OUTSIDE ofthe liner, or INSIDE ofthe bucket. All measure-ments are rounded to thenearest half inch.
D & E measurements aretaken three inches upfrom the bottom, on theoutside of the liner.This eliminates distor-tion due to the radiusof the corners.
A is measured from thebottom of the rim to thebase of the liner.B & C measurements aretaken one inch down frombeneath the lip, on theoutside of the liner.
S = Liner with Molded Step
*. Includes control cut out in liner rim, for non cut rim, order UB-NC
FORM #1010-C UTIL BODY Rev.C 5/07Copyright 2007
UTILITY BODY
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
ITPLEDOM
#
S'.GFMEDOC EPAHS SEHCNINISNOISNEMID
)evobasa(
REP.ONXOB SMETIYROSSECCAITP
----------- ----------- ----------- A B C D E ----------- SDIL FFUCSSDAP
SDAPFFUCSSPETSHTIW
*CBU ydoBytilitU erauqS 24 22 22 22 22 2 I-LLATIF 02-D 3-SD
CN-BU ydoBytilitU erauqS 24 22 22 22 22 2 I-LLATIF 02-D 3-SD
24-U ydoBytilitU erauqS 24 32 32 22 22 3 82L2 12-D 6-SD
S24-U ydoBytilitU erauqS 24 32 32 22 22 3 82L2 N-12-D 6-SD
Designed for use on aerial lift bucket trucks made by:
BUCKET LINERS
LINER SPECIFICATIONSLINER SPECIFICATIONS
NOTE: All dimensionsshown in chart belowrefer to the OUTSIDE ofthe liner, or INSIDE ofthe bucket. All measure-ments are rounded to thenearest half inch.
D & E measurements aretaken three inches upfrom the bottom, on theoutside of the liner.This eliminates distor-tion due to the radiusof the corners.
A is measured from thebottom of the rim to thebase of the liner.B & C measurements aretaken one inch down frombeneath the lip, on theoutside of the liner.
FORM #1011-C VARIOUS MFRS. Rev.D 5/07Copyright 2007
VARIOUS MANUFACTURERSAerial Lift \ Dur-A-Lift \ Hunt-Pierce \ Skyworker
S = Liner with Molded Step
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
ITP#LEDOM
S'.GFMEDOC EPAHS SEHCNINISNOISNEMID
)evobasa(
REP.ONXOB SMETIYROSSECCAITP
----------- ----------- ----------- A B C D E ----------- SDIL FFUCSSDAP
SDAPFFUCSSPETSHTIW
30-A tfiLlaireA erauqS 93 42 42 22 22 3 82L2 12-D 72-SD
82-SA hdnulpsA .tceR 24 72 22 42 91 3 23L82 03-D 03-SD
30-C rekrowykS erauqS 93 42 42 22 22 3 82L2 12-D 72-SD
40-C rekrowykS erauqS 93 42 42 5.22 5.22 3 82L2 22-D 71-SD
24-LD tfiL-A-ruD erauqS 24 42 42 12 12 4 82L2 02-D 1-SD
S24-LD tfiL-A-ruD erauqS 24 42 42 12 12 4 82L2 N-02-D 1-SD
95-U ecreiPtnuH erauqS 93 5.32 5.32 02 02 4 82L2 91-D 51-SD
Designed for use on aerial lift bucket trucks made by:
BUCKET LINERS
FORM #3018 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE -03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
- SECTION 4 -SAFETY EQUIPMENT
Actually, "Safety Equipment" could be the title of our catalog, since all ourproducts provide safety for linemen. However, this section catalogues peripheralsafety equipment.
Safety is a long term commitment. To assist in that commitment, PTI offers twonew skin protection products. The SPF 30 sunscreen will help protect your skinagainst overexposure to ultraviolet radiation. The insect repellent is beingoffered in response to customers' requests for help in deterring various insectsthat serve as vectors for unpleasant and potentially deadly diseases.
Our lights are designed to be rugged and useful while maintaining an extremelyhigh safety factor. This is most obvious in the fact that there is no exposedmetal on our lights. All lights have flood and spot. Rechargeable capabilitiesand a full range of replacement parts are available in all models.
The Glove Boxes and Blanket Canisters use a polyethylene that is blended to pro-vide the maximum protection from oils and chemicals commonly encountered in thetransportation and storage of the lineman's blankets and gloves. Bright safetycolors are standard. Most models can be shipped UPS/FedEx Ground. Color coding tofit in to your system is available upon request.
Aerial Safety Light UL-2AUL-2A Replacement PartsLineman's Utility Light UL3UL3 Replacement PartsBlanket CanistersGlove Box / Line Hose BoxPole Hauling LightsWheel Chocks / Outrigger PadsLine Hose SpreaderRainbow & Timberwolf ProductsProtective Light Base Cover
Click on an item or scroll down to browse this section.
AERIAL SAFETY LIGHTBattery Powered
Designed for use on aerial lift bucket trucks
Model #UL-2A
• Safe - No exposed metal; Insulated light housing is impervious tocorrosion; Impact resistant battery housing constructed ofpolyethylene.
• Light - Dual beam: candle power is 25,000 on high beam, and3,000 on low beam.
• Sealed beam - Bulb housing in a thick polymer socket; light isavailable with an optional protective bulb shatter guard.
• Battery - Uses a standard 7.5 volt battery. (Eveready #715 or Ray-O-Vac #903)Not included.
• Switch - A three way switch housed in a neoprene jacket.
• Bracket - Light will mount anywhere on the bucket rim with a PTIdesigned bracket.
• Positioner - Light swivels and may be aimed in any direction.
• Rechargeable battery - Option available
• Rechargeable Battery Port - a port drilled into the lightthat makes it possible to recharge the batteries withouthaving to open the top of the light as in the oldrechargeable UL-2’s.
FORM #3019-C Rev.E 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
#LEDOMITP NOITPIRCSED
A2-LU thgiLytefaSlaireA
GUB-LU drauGrettahSbluB
TAB-LU yrettaBtloV5.7
A2-BCR-LU yrettaBelbaegrahceR
A2-GHC-LU regrahceRyrettaB
Model #UL-2A sideview
SAFETY EQUIPMENT
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
à
à
â
AERIAL SAFETY LIGHTReplacement Parts & Accessories
for MODEL #UL-2A
NotShown
FORM #3020-C Rev.C 5/07Copyright 2007
5 6 7 8
ââ â
â
9
4
3
2
1
2B2A
à
à
à
à
#MARGAID #LEDOMITP NOITPIRCSED
1 ACB-LU ylbmessAesaCyrettaB
2 TAB-LU yrettaBtloV5.7
A2 A2-BCR-LU yrettaBelbaegrahceR
B2 A2-GHC-LU regrahceRyrettaB
3 ADL-LU lanimreTsedulcni,ylbmessAdiLylbmessAtuN
4 ANT-LU ylbmessAtuNlanimreT
5 AHB-LU sedulcniylbmessAgnisuoHbluBylbmessAhctiwS
6 HCTIWS-LU ylbmessAhctiwS
7 LUB-LU ylbmessAbluB
8 GUB-LU ylbmessAdrauGbluBlanoitpO
9 SBN-LU tuNgniWdnatloB
AN L2-LU A2-LUrofylnodiL
SAFETY EQUIPMENT
Designed for use on aerial lift bucket trucks
FORM #3021-C Rev.H 5/07Copyright 2007
LINEMAN’S UTILITY LIGHT
PTI’s new UL-3 lineman’s light is proving to be quite anenhancement to our product line. It consists of a 200,000 candlepower halogen light which is almost 10 times brighter than ourUL-2 model. It uses a 6" diameter reflector with a 6.5 amp hourbattery with built in DC charger. This produces a 1 hour spot and5 hour flood. It uses a 55 watt H-2 bulb for spot and 12 wattP-2 for flood. The battery will recharge in 8 hours. The UL-3 ismade from a waterproof construction, all nonconductingthermoplastic.
With 2 bulbs, if one should burn out, the other will continuegiving a true emergency light. If the glass lens should break, theshock mounted bulb will survive. The bulbs can easily be changedwithout the aid of tools, and are less expensive than one sealedbeam.
The battery is a sealed lead acid, 6.5 amp hour with a rechargetime of 8 hours. It has both 12 volt DC and 120 volt ACrecharging capabilities. The light weighs approximately 9.5 lbs.
The UL-3 has two battery indicator lights on top of the batterybox. The Battery Condition light indicates the battery statusduring operation. It glows green during operation and changes tored when power is low (approximately 25%) and is in need ofcharging. The Charging Status light indicates the battery statuswhen charging. The L.E.D. glows red when charging, thenchanges to green when fully charged and is accepting a tricklecharge.
• Built-in Battery Charger
• Lead-Acid Rechargeable Battery
• 115V AC Adaptor
• 12V Wire Harness
• For side mounted handle order #611004
UL-3A :
• Same as UL-3, but includes cigarette plug power cordin place of wire harness
UL-E3 Includes:
• Built-in Battery Charger
• Lead-Acid Rechargeable Battery
• 220V, 50 Cycle AC Adapter
• 12V Wire Harness
Model #UL-3
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
#LEDOMITP NOITPIRCSED
400116 eldnahhtiwthgilhceT
3-LU thgiLytilitUs'nameniL
A3-LU thgiLytilitUs'nameniL
3E-LU thgilelcyc05v022
)lanoitpo(3-GUB-LU drauGrettahSbluB
)lanoitpo(CP-LU drocrewoptlov21
UL-3 Includes:
SAFETY EQUIPMENT
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
LINEMAN’S UTILITY LIGHTUL-3
Replacement Parts & Accessories
FORM #3022-C Rev.F 5/07Copyright 2007
NOTE: Part No.s UL-PC & UL-PPC
* Factory Installed
Effective 6/8/98 the UL-3 Plugs and recepticlehave been updated. If your light is an olderversion contact our Sales Office for update
5A
5
6
4
32
1
7
#MARGAID #LEDOMITP NOITPIRCSED
1 SBN-LU tungniWdnatloB
2 A3-LUB-LU hgiH=topS,bluB2-HW55S
3 B3-LUB-LU woL=doolF,bluB2-PW21F
4 BHL-LU ydoBthgiL
5 3-GHC-LU regrahCtloV511
A5 3E-GHC-LU regrahCnaeporuEzH05V022
6 CP-LU gulp.gic/wdroCtloV21
7 CPP-LU ssenraHeriWtloV21
NWOHSTON 3-GUB-LU drauGsneLlanoitpO
NWOHSTON 3-BCR-LU *yrettaBelbaegrahceR
NWOHSTON 3-SNELR-LU sneLtnemecalpeR
6
SAFETY EQUIPMENT
BLANKET CANISTERS
• Mechanical - Protection for blankets at thewarehouse, during transportation, and on the job site.
• Chemical - Special resilient polyethylene resists abroad range of chemicals.
• Ultraviolet - Inhibitor protects from sunlightdegradation.
• Carries - Up to four blankets in 6" diameter models,and six blankets in 10" diameter models.
• Standard - Sizes for 22", 36", 46" and 48" squareblankets.
• High Visibility - Standard color is safety orange.Color code system for blankets available.
• Impervious - Special polyethylene formula is notaffected by hydraulic oils, and motor oils.
• Weather Protection - Assured with snug fitting endcap.
• Custom - sizes are available
Designed for use on aerial lift bucket trucks
Various blanket canister models
FORM #3023-C Rev.D 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
#LEDOMITPRETEMAID"01
#LEDOMITPRETEMAID"6 NOITPIRCSED
)egnaro(O22-2CB)wolley(Y22-2CB
)yerg(G22-2CB
O22-CBY22-CBG22-CB
erauqs"22sdloHteknalb
O63-2CBY63-2CBG63-2CB
O63-CBY63-CBG-63-CB
erauqs"63sdloHteknalb
O64-2CBY64-2CBG64-2CB
O64-CBY64-CBG64-CB
erauqs"64sdloHteknalb
O84-2CBY84-2CBG84-2CB
O84-CBY84-CBG84-CB
erauqs"84sdloHteknalb
#LEDOMITPRETEMAID"5 NOITPIRCSED
O31-3CBY31-3CBG31-3CB
gnol'31x"5
O52-3CBY52-3CBG52-3CB
gnol"52x"5
O73-3CBY73-3CBG73-3CB
gnol"73x"5
Model BC-22Y
Model BC-460 Model BC2-48Y
SAFETY EQUIPMENT
Designed for use on aerial lift bucket trucks
GLOVE BOX / LINE HOSE BOX
FORM #3024-C Rev.E 5/07Copyright 2007
Line Hose Box - MODEL #GB-20
MODEL #GB-30
*Note: GB-14 is a "Clamshell" construction,with a 7" Lid on a 7" Deep Tray.
** Nestable - Not Available with GB-Chesthandles
Call for Fork Feet options
Rugged! Weatherproof! Lighter than fiberglass! Virtually immune to crackingor breaking whether bouncing around in the mail or the back of a pickup!
Accessory Options:GB-Chest Spring Loaded chest handles for GB (pair)
GB-Pull Stationary Pull handles for Glove Box. (pair)
GB-Card Card Holder
GB-Feet Fork Feet
GB-Strap Set of 2 Poly webbing straps (1") with clampbuckles
GB-Strap-A Set of 2 straps with polymer buckles
GB-Strap-B Set of 2 straps with ratchet closure
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
• Specially formulated polyethylene sheds oil without absorption!
• Shaped to shed water, dirt, ice and snow!
• Shaped flange and optional permanently attached straps assure atight seal - protect the dielectric safety of tested gloves fromstation to field!
• Standard color is safety yellow!
• The GB-20 linehose box is great for shipping and storing 4 foot linehose. Top cover fastens lightly with webbing straps. Transportseasily with forklift.
• GB-30 standard color is white.
SAFETY EQUIPMENT
POLE HAULING LIGHTS
All pole hauling lights come with 2 flag holders (flags not
included) and web strap binder unless otherwise noted.
* Batteries are customer supplied.
FORM # 3435-C 03/02 Rev.5/07 Copyright 2007
Designed for use on utility line trucks
PLASTIC TECHNIQUES, INC.
Model #611001P
Approximate Shipping Weight: 20 lbs.
#LEDOMITP NOITPIRCSED
P100116 drazahydaetssthgilecnaraelc3,tloV6
P200116 rotcennoCcavleV,liaT,nruT,potS
P500116 nocaebrebma,elbaegrahcertloV21
P600116 derewopyrettab,nocaebderdilostloV6
P800116 redloHgalFgniluaHeloP
P900116 nocaeBrebmA,liaT,nruT,potS
P120116 nocaeBrebmA1,CMS2,TTS2,sthgil5tloV21
PTTS-LHP liaT,nruT,potS
21-LHP edomdrazahroydaetssesnelder2yrettabtloV21
A21-LHP edomdrazahroydaets,sesnelrebma2yrettabtloV21
P420116 nocaebder,detarepoyrettab,deltlov21,eloPdiM
P520116 nocaebrebma,detarepoyrettab,deltlov21,eloPdiM
P620116 nocaebdertnatsnoctlov6eloPdnE
P720116 nocaebder,gnihsalftlov21eloPdnE
S-LHP nocaebder,yrettabelbaegrahcertlov21
1S-LHP nocaebrebma,detarepoyrettabtlov21
SAFETY EQUIPMENT
Model #611002P
Model #611005P
Model #PHL-STTP
• Light system that attaches to back end of pole being hauled to work site.• Battery powered lights are completely independent from truck's electrical system. Provides safety warning for trailer mounted pole when detached from truck.• Two lighting modes, constant on (tail light), or flashing (hazard style).• Bright safety yellow.• Lights standard color is Red.
(Amber is available at no extra charge, please specifiy when ordering.)• Weatherproof.• Webbing and ratchet mounting system included.• Rugged O-Ring sealed units allow for easy lamp replacement. "Top Hat" style lamp bezel provides warning to rear and sides of pole.• Reflective strips provide additional protection.• Battery powered models use standard lantern batteries.
(6 volt uses Ray-O-Vac #903 or EVEREADY #715)
(12 volt uses Ray-O-Vac #926).• Two Flag Holders.• Vehicle Powered model does not include cable. (Stop, Turn, Tail functions)• Beacon now available (standard beacon color is yellow).
Model #611006P
Model #611009P
Model# PHL-S1
Model #PHL-12
FORM #3099-C Rev. B 5/07Copyright 2007
Wheel ChocksPrevent Wheel Slippage
MODEL # WC689
FEATURES:
• Designed to Provide Maximum Gripping Power onvirtually any surface, wet or dry.
• Resistant to sun, moisture, salt, and oil. Meets OSHArequirements.
• Traditional eyebolt for sturdy chain connection.
• Fabricated of a new, tough, rubber compound,reinforced for maximum wearability and strength.
• Jumbo sizes (up to 14" x 14") are available.
• Designed to fit the curvature of a tire for a stronggrip.
• Heavy-duty construction for use with heavy utilitytrucks and equipment.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
LEDOM NOITPIRCSED H W L
986CW skcohCleehW 6 8 9
888CW skcohCleehW 8 8 8
MODEL # WC888
Outrigger Pads
LEDOM NOITPIRCSED SNOISNEMID
300915 daPreggirtuO 1X21X21
800915 daPreggirtuO 1X81X81
400915 daPreggirtuO 1X42X42
900915 daPreggirtuO 1X22X42
700915 daPreggirtuO 1X63X63
These pads provide solid support to the outriggers andhelp prevent damage to pavement. They can be handledand stowed away without difficulty.
• Includes your name / logo *
• Lightweight
• Strong and Resilient
• Corrosion resistant
• Minimum water absorption
• Shape retention
• Custom sizes available
• Square and round shapes
• Square pads have 45 cut on corners
• Rope handles with protective tubing standard
* Logo setup charge may apply
SAFETY EQUIPMENT
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
FORM #3097-C Rev.B 5/07Copyright 2007
EEL SpreaderA Field Inspection Device for Insulating Line Hose
Reveals Hidden Damage...Mounts Easily to Utility Vehicle...Prevents Hand Injuries
FEATURES:
• Until now, there has been no easy way to clean andinspect the inside of a line hose. This new device revealstears, punctures, and cuts inside the line hose - potentiallyserious defects that would otherwise go unnoticed.
• Using the EEL Spreader, utilities can easily meet theASTM field care requirements for line hose. They shouldbe visually inspected - both inside and outside - each daybefore use.
• The device can be set in a vise or attached directlyto a bench. It is constructed of durable, rugged plasticwhich is impervious to virtually any oil or detergent.
• Linehose cleaner and Lubricant is a non-flammablesilicone spray. With high dielectric strength of 22,000volts it effectively removes rubber bloom oxidation,carbon, light greases, dirt and light contaminants fromplastics, metals, and rubber goods while protecting againstoxidation and corrosion from moisture and UVRays.
Feeding a line hose through the tapered EEL spreader is easy (U.S. Patent No. 5,796,032).
LEDOM NOITPIRCSED RETEMAIDSTIF THGIEW
LEE )GL(redaerpSesoheniL "5.1-"52.1 .sbl5
2-LEE )MS(redaerpSesoheniL "1 .sbl4
200616 dnarenaelcesoheniL)6foesac(tnacirbul .sbl6
MODEL # EEL
MODEL # EEL-2
SAFETY EQUIPMENT
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
FORM #2063-C 5/07Copyright 2007
RAINBOW PRODUCTSDescription:Industry recommended SPF 30. Canstay in sun 30 times longer withoutburning. Designed for all dayprotection from the harmful rays ofthe sun. Waterproof, resists sweating,and moisture. Greaseless formula driesrapidly and will not affect one’s handgrip nor, come off on tools andequipment. Specially formulated forthe Telecom and Utility industries.One application lasts all day. Testedsafe on Rubber Gloves.
Description:Effectively removes rubber bloom oxida-tion, carbon, light greases, dirt, and lightcontaminants from plastics, metals, andrubber goods. The heavy-duty silicone(6.75%) provides superior penetration andlubrication for metals, plastics, and rubberwhile protecting against oxidation andcorrosion caused by moisture and UV rays.This unique, non-flammable formula with ahigh dielectric strength (22 kV), is anexcellent choice where flammability andmedium to high voltage is a concern. Thisnon-oil based silicone contains no hexaneand is safe for use on splices and elbows.
Description:A multi-purpose repellent that repelsgnats, mosquitoes, biting flies, chiggers,ticks, flying insects, plus fleas on skinsurfaces. Contains extra strength 25%DEET formula. Prevents unsafe insectdistractions. Stops persistent biting andpiercing insects. Reduces possibility ofLyme Disease, Rocky Mountain SpottedFever, and West Nile Virus. Long-lastingprotection, frequent applications notnecessary. Extra protection formula fortelecom and utility personnel.
#metIwobniaR noitpircseD
100716 sepiWneercsnuSfokcaP52
910716 sepiWneercsnuSfokcaP001
200716 neercsnuSfoelttobzo4
300716 neercsnuSselttobzo421/sc
200616 naCyarpSebuL&naelC6/sc
010716 tnellepeRtcesnIalumrofelgnuJnac1
floWrebmiT MT #metI noitpircseD
920716 elttobzolf8 floWrebmiT MT
030716 selttob21/sc floWrebmiT MT
TIMBERWOLF
SAFETY EQUIPMENT
FEATURES
** 12 Individually packed wipes** Easy to Apply - No Mess** Water based Deet Formula** Repels Ticks, Mosquitoes, Black Flies, Chiggers, Deer Flies& other biting insects.
This is a box of 12 individually wrapped wipes. Ben’s Tick &Insect Repellent Wipes contain 30% DEET formula that iswater based. Easier & faster to apply than sprays or lotions,Ben’s wipes allow you to control exactly where and how muchrepellent you apply to your skin. Ben’s unique water-basedformula insures that the repellent will last longer than alcoholbased repellents that quickly evaporate from your skin.
BEN’S
Timber Wolf is a citrus based, biodegradable,environmentally safe, waterless hand cleaner.Other products leave your hands dry and gritty,but not Timber Wolf. Our product containsno pumice, petroleum, or mineral solvents.Timber Wolf is pH balanced and contains thefinest moisturizing agents plus aloe vera tohelp heal cuts and scratches and skin irritation.
REMOVES
• fiber optic cable jelly• silicone gel• c-cement• kopper bond• pipe dope• grease & oil• creosote & tar
Ben's Item # Description
617008 Ben's Insect Repellent Wipes12 pcs/box
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
PROTECTIVE LIGHT BASE COVERDiscourages Accidental Contact with Live Wires
Non-conductive ... Durable ... UV Resistant
Figure 2 Figure 3 Figure 4
Although the Protective Light Base Cover is constructed from a generally non-conductive material, the mounting hardware may beconductive; therefore PTI does not conduct any electrical testing on the cover and does not warrantee for dielectric value. It is not meantto act as an insulating device.
FORM #3079-C Rev.B 5/07Copyright 2007
Figure 1
model 412002 front view
model 412002 inside view
Light Base HazardsWhen the plate is removed from a light base, (figure 1) the live wires may pose ahazard to passersby. The Protective Light Base Cover will help discouragesomeone from accidently touching the wires. It will also shield the base fromdamage caused by the sun, rain, ice and snow.
Light Base without a PoleThe Protective Light Base Cover easily slides over a light base without a pole.(Figure 2)
Light Base with a PoleBy removing the detachable lid on the top of the Protective Light Base Coverand unbolting a seam that runs down the length of its side, the cover may bespread open (figure 3). This allows the Protective Light Base Cover to beinstalled, even when a pole is attached to the base. (Figure 4).
General informationPTI’s plastic is a specially blended, non-conductive formula which ensures strongmechanical properties. The material has UV inhibitors added which retard ultra-violet degradation. It also offers excellent cold weather characteristics as well.
SAFETY EQUIPMENT
P T I M O D E L # D E S C R IP T IO N & D IM E N S IO N SA P P R O X .S H IP P IN GW E IG H T
4 1 2 0 0 1L a rg e P ro te c tiv e L ig ht B a s e C o v e rB ase : 2 3 " S Q , To p : 1 7 " S Q ,P o le D ia : 1 3 ", H t:2 5 "
2 3 lb s .O ve rs ize d P a c k age
4 1 2 0 0 2S m a ll P ro te c tiv e L ig ht B a s e C o v e rB ase : 1 7 " S Q , To p : 1 4 " S Q ,P o le D ia : 11 ", H t:2 0 "
2 0 lb s .O ve rs ize d P a c k age
FORM #3025-C Rev.C 5/07Copyright 2007
— SECTION 5 —SCUFF PADS
PTI scuff pads take a beating so your liner and buckets won't. Extend thelife of the critical insulating component in your aerial lift units.
BD Scuff Pads are for buckets without liners, they provide the same protec-tion for the bucket as our standard scuff pad.
Help prevent injury from slips and falls, line the bottom of buckets andliners with our "TRU-GRIT" scuff pads.
The "HY-JACKER" aids in reduction of lower lumbar stress.
Scuff Pads - All Models
Fiberglass Scuff Pads
"Tru-Grit" Scuff Pads
BD & BDL Scuff Pads
Ergonomic Safety Grating
Ergonomic Bucket Liner Pads
Hy-Jacker
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 n GOFFSTOWN, NEW HAMPSHIRE 03045-0250 n TEL: 603-645-6800 n FAX: 603-623-0918
Click on an item or scroll down to browse this section.
A= curbside/ passenger side forward*Available for left (DS7L, DS25L) and right (DS7R, DS25R)US PATENT #4763758
FORM #3027C 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 n GOFFSTOWN, NEW HAMPSHIRE 03045-0250 n TEL: 603-645-6800 n FAX: 603-623-0918
SCUFF PADS
PTI M OD EL # SHAPE FITS PTI LIN ER M OD EL AER IAL LIFT M AN UFACTUR E
DS-1 Square AL-41, AL-41S,H-42, H-42S, TE-41, TE-41S, L-41, L-41S,TM -41, TM -41S, RU41, RU41S, DL-42, DL-42S
DUR-A-LIFT, ALTEC , HO LAN , LIFT-ALL,TIM E, REAC H-ALL, TEC O
DS-2 Square A-40, AD-40 ASPLUN DH, AERIAL DEVIC ES
DS-3 Square UBC , UB-N C UTILITY BO DY
DS-4 Square T-39S, A-39S TEL-E-LEC T
DS-5 Square H-28 HO LAN
DS-6 Square A-47, A-47S, M S-47, M S-47S, P-47, T-42, T-42S, TM -42,TM -42S, U-42, U-42S, T-39, A-39, RO -47, RO -47S
ALTEC , M C C ABE, PITM AN , TIM E TEL-E-LEC T, UTILITY BO DY, RO
DS-7 6-sided P-46 PITM AN
DS-8 Rectangle T-28E, A-28S, R-28S, T-28ES, TE-28S, AT-30S, TM -28,TM -28S, LA-28, LA-28S, H-88, H-88S
ALTEC , TEC O , HO LAN , HI-RAN GER,LIFT-ALL, TEL-E-LEC T, TIM E
DS-8A Rectangle A-28, R-28, AT-30, H-30, TE-28, T-28E ALTEC , TEC O , HI-RAN GER, HO LAN ,TEL-E-LEC T, TIM E, LIFT-ALL
DS-9 Rectangle AT-20, T-20 ASPLUN DH, TEL-E-LEC T
DS-10 Rectangle R-22 HI-RAN GER
DS-11 Rectangle TM -48, T-48, T-48S, R-48, A-48, A-48S, R48S, TE-48, TE-R8S
ALTEC , HI-RAN GER, TIM E, TEL-E-LEC T,TEC O
DS-11A Rectangle TM -48, T-48, A-48, R-48, TE-48 ALTEC , HI-RAN GER, TEC O
DS-12 Rectangle RE-50, H-50 REAC H-ALL, HO LAN , TIM E, TEL-E-LEC T
DS-12A Rectangle RE-50, H50 REAC H-ALL, HO LAN
DS-13 Rectangle LA-46, LA-46S LIFT-ALL
DS-13A Rectangle LA-46 LIFT-ALL
DS-14 Square R-24 HI-RAN GER
DS-15 Square RU-59, U-59, BU-59 REAC H-ALL, HUN T, BAK ER
DS-16 K idney TM -40 TIM E
DS-17 Square C -O 4, H-38 SK YW O RK ER, HO LAN
DS-18 Square H-39, TM -39 HO LAN , TIM E
DS-19 Rectangle R-38 HI-RAN GER
DS-20 Square H-18 HO LAN
DS-21 Square M S-40 M C C ABE
DS-22 Square M S-41 M C C ABE
DS-23 6-sided M S-43 M C C ABE
DS-24 Rectangle P-45 PITM AN
DS-25 6-sided A-49, P-49 ALTC , PITM AN
DS-26 K idney P-52 PITM AN
DS-27 Square C -O 3, A-O 3 SK YW O RK ER
DS-28 K idney R-66 HI-RAN GER
DS-29 K idney R-68 HI-RAN GER
DS-30 Rectangle S-30, A-28 STELC O
DS-31 K idney TE-67 TEC O
DS-32 Rectangle A-30, T-30 ALTEC , TEL-E-LEC T
DS-32A Rectangle A-30, A-30S, T-30, T-30S ALTEC , TEL-E-LEC T
DS-33 Rectangle H-30S HO LAN
DS-44 Rectangle/-K idney TE-54 TEC O
DS-76 Rectangle TM -24 TIM E
DS-76A Rectangle TM -24 TIM E
Designed for use on aerial lift bucket trucks
FIBERGLASS SCUFF PADSwith a Built-In Step
Model DS-1
FORM #3027-C Rev. F 5/07Copyright 2007
• Designed for use in bucket liners.
• Molded step for easy exit and added safety.
• Protects the floor of your liner.
• "Tru-Grit" surface helps eliminate slipping.
• High quality fiberglass for strength and longevity.
• Available in all standard liner configurations.
• May be used in liners with or without molded step.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 n GOFFSTOWN, NEW HAMPSHIRE 03045-0250 n TEL: 603-645-6800 n FAX: 603-623-0918
Standing in the basket with your back to theboom.Note the A# places the step in the upper rightor lower left corner.
Model DS-11
Model DS-8
SCUFF PADS
"TRU-GRIT" SCUFF PADSFOR 1 & 2 MAN BUCKETS
Designed for use on aerial lift bucket trucks
FORM #3028-C Rev.F 5/07Copyright 2007
MODEL #D-22
Dimensions measured on the outside of scuffpad and rounded off to nearest inch.*Available in Fiberglass without step
NOTE: Add the Suffix "N" to model number when ordering scuffpad to fit liner with molded in step (For example: D-21-N will fitPTI liner model A-39S).
PTI’s exclusive process suspends thousands of bits of grit in amolded polyethylene scuff pad. The pad is super smooth on theoutside to protect the bucket and/or liner. Inside, the pad’s grittysurface provides the lineman with non-skid footing and greatersafety!
PTI’s "TRU-GRIT" pads help avoid the ravages of dirt, cut wiresand other hazards encountered in normal use.
PTI’s "TRU-GRIT" scuff pad series offers a size to fit mostaerial lift bucket liners.
EXCLUSIVE NON-SKID SURFACE!LONGER BUCKET/LINER LIFE!GREATER LINEMAN SAFETY!
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 n GOFFSTOWN, NEW HAMPSHIRE 03045-0250 n TEL: 603-645-6800 n FAX: 603-623-0918
ITP#LEDOM EPAHS EZIS
)HxWxL( LEDOMRENILITPSTIF RERUTCAFUNAMTFILLAIREA
81-D erauqS 4x81x81 14-SM EBACcM
91-D erauqS 4x91x91 93-SM,95-UB,04-SM,95-U,95-UR TNUH,REKAB,EBACcM,LLA-HCAER
02-D erauqS 4x02x02 ,42-R,14-T,24-H,04-A,14-LA,81-H24-LD,14-MT,14-UR,14-L,CNBU,CBU
,REGNAR-IH,HDNULPSA,CETLA,NALOH,LLAHCAER,LLATFIL,EMIT,YDOBYTILITU
OCET,TFILARUD
12-D erauqS 4x12x12 ,30-C,24-MT,74-SM,24-T,74-P,82-H30-A,24-U,74-OR,93-A,74-A,93-T
,OCET,CETLA,EMIT,NAMTIP,NALOH,OR,EBACcM,REKROWYKS,TCEL-E-LET
TFILLAIREA,YDOBYTILITU
*22-D erauqS 4x22x22 93-MT,40-C,93-H,83-H EMIT,REKROWYKS,NALOH
32-D dediS-6 4x02x91 94-OR,94-P,94-A,64-P OR,CETLA,NAMTIP
42-D elgnatceR 4x12x71 02-TA,02-T HDNULPSA,TCEL-E-LET
62-D elgnatceR 4x12x72 03-T,03-A,03-H,03-TA HDNULPSA,NALOH,TCEL-E-LET,CETLA
82-D elgnatceR 4x02x62 82-AL,88-H,82-MT,82-ET,82-A,82-RE82-T
,NALOH,EMIT,OCET,CETLA,REGNAR-IHTCEL-E-LET,LLATFIL
*03-D elgnatceR 4x71x32 03-S,82-SA OCLETS,HDNULPSA
43-D elgnatceR 4x71x12 22-R REGNAR-IH
*83-D elgnatceR 4x91x33 83-R REGNAR-IH
*GF04-D elgnatceR 4x22x04 42-MT EMIT
34-D dediS-6 4x12x02 34-SM EBACcM
64-D elgnatceR 4x02x44 ,84-T,84-MT,84-ET,84-A,05-ER,84-R64-AL,05-H
,EMIT,CETLA,LLA-HCAER,REGNAR-IHOCET,LLATFIL,NALOH,TCEL-E-LET
*GF25-D yendiK 4x12x15 25-P NAMTIP
*GF66-D yendiK 4x82x55 66-R REGNAR-IH
86-D yendiK 3x82x45 86-R REGNAR-IH
SCUFF PADS
FORM #3026-C Rev.C 5/07Copyright 2007
BD & BDL SCUFF PADS
Specially designed for Buckets without Liners
* Dimensions measured on outside of scuffpad and rounded off tonearest inch
The BD Scuff Pad series are made from a special grade ofpolyethylene.
It is purposely made a little on the soft side in order to givebetter fit.
It is suggested that the scuff pad be removed at weekly intervals andcleaned out. At the same time the bottom of the bucket should becleaned to remove dirt, pieces of wire, etc. This periodic cleaning willincrease the life of your equipment.
BD Scuff Pads feature PTI’s unique method of molding grit throughoutthe scuff pad which means that as you wear the surface, more grit isexposed so the non-skid surface endures.
BDL Scuff Pads are natural in color and are molded with heavier(nominal 5/16") walls than our BD model. They have non-skid tractionbars applied to the inside floor surface. Designed for heavy dutyprotection of basket floor when an insulating liner is not used. Unfortu-nately, BDL's are only available on a limited basis.
PLEASE CALL BEFORE ORDERING.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
#LEDOMITP EPAHS LEDOMRENILITPSTIF RERUTCAFUNAMTFILLAIREA
*91-DB erauqS "4x"91x"91 EBACcM
*02-DB erauqS "4x"02x"02 REKAB,YDOBYTILITU,EBACcM,ECREIPTNUH,LLA-HCAER
*12-DB erauqS "4x"12x"12 REGNAR-IH42X42
*22-DB erauqS "4x"22x"22 EMIT,NALOH,HDNULPSA,TCEL-E-LET
*52-DB dediS-6 "4x"12x"02 )NAM1(NAMTIP
*33-DB erauqS "4x"32x"32 REKROWYKS,NALOH
1-LDB dediS-6 "4x"8/591x"4/102 NOITACILPPA
2-LDB elgnatceR "4x"2/112x"8/354 EBTSUM
4-LDB erauqS "4x"2/122x"2/122 DENIMRETED
6-LDB erauqS "4x"8/712x"8/712 TEKCUBMORF
8-LDB elgnatceR "4x"4/112x"4/172 EDISNI
9-LDB erauqS "4x"4/112x"4/112 SNOISNEMID
01-LDB erauqS "4x"8/712x"8/712 DERUSAEM
11-LDB erauqS "4x"12x"12 "3
31-LDB elgnatceR "4x"4/302x"4/343 EVOBA
51-LDB erauqS "4x"4/122x"4/122 ROOLF
91-LDB erauqS "4x"4/302x"4/302 LEVEL
22-LDB elgnatceR "4x"8/781x"8/342
72-LDB erauqS "4x"4/322x"4/322
MODEL BD22
MODEL BDL-11
SCUFF PADS
Designed for use on aerial lift bucket trucks
MODELS #198 & 298
FORM #3060-C Rev.E 5/07Copyright 2007
Order PTI part# by base number, add width at the - . IE 198B-3 is Air Filled mat Blue color 3 feet wide by 1 foot long.Sold by the foot - please specify number of feet when ordering.
AIR FILLED• Lets you "Walk on Air"• Forms a flexible surface to stand on to provide cushioning.
• Standard Color is Blue
SOLID TREAD• Has "Tire Like" gripping surface• Forms a solid yet flexible surface• Standard Color is Blue
- TWO STYLES -
ERGONOMIC SAFETYGRATING
EXCLUSIVE "WALK ON AIR SURFACE"! GREATER LINE-MAN SAFETY! LONGER BUCKET/LINER LIFE!
FEATURES:
• Hygienically designed to allow free drainage of fluid anddebris.
• Will not rot, flake, or splinter. Color molded throughout.
• Available in Blue or Black
• Two styles to choose from, Air-filled, and Solid gripper tread.
• Both styles are a bonded grid pattern.
• Specify any length up to 40'.
• Widths available are 2', 3' and 4'
• Sold in 1 Ft. lengths, custom cut to your specs. (Item Non-Returnable)
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
SCUFF PADS
PTI M ODEL # DESCRIPTION WIDTH
198B- Air filled blue 2' 3' 4'
198L- Air filled black 2' 3' 4'
298B- Solid Tread Blue 2' 3' 4'
298L- Solid Tread Black 2' 3' 4'
ERGONOMIC BUCKET LINER PADS
FOR 1 & 2 MAN BUCKETSEXCLUSIVE NON-SKID SURFACE! LONGER BUCKET/LINER LIFE! GREATER LINEMAN SAFETY!
Designed for use on aerial lift bucket trucks
FORM #3048-C 5/07Copyright 2007
MODEL #EP
Add suffix D for 1" smaller pad to fit scuffpad (EPD-18)*Add suffix F for soft Foam model (EPF-18)Add suffix N for pad to fit Liner with molded in step (EP-21N, EPF-21N, EPD-21N, EPDF-21N)
FEATURES:
• Standard sizes to fit PTI liners and scuff pads.
• Designed for Ergonomic cushioning without that "LostMotion" feel of too-soft pads.
• Tough non-slip finish.
• For energized work.
• Custom Sizes available.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
• *Available in soft foam model for extra cushioning -add suffix "F" to part numbers below for the foam.
#LEDOMITP EPAHS LEDOMRENILITPSTIF RERUTCAFUNAMTFILLAIREA
81-PE erauqS 14-SM EBACcM
91-PE erauqS 93-SM,95-UB,04-SM,95-U,95-UR TNUH,REKAB,EBACcM,LLA-HCAER
02-PE erauqS ,CBU,42-R,14-ET,24-H,04-A,14-LA,81-H24-LD,14-MT,14-UR,14-L,CNBU
,EMIT,REGNAR-IH,HDNULPSA,CETLA,NALOHOCET,LLA-HCAER,YDOB.LITU,LLATFIL,TFILARUD
12-PE erauqS ,93-T,30-C,24-MT,74-SM,24-T,74-P,82-H30-A,24-U,74-OR,93-A,74-A
,TCEL-E-LET,OCET,CETLA,EMIT,NAMTIP,NALOHTFILLAIREA,YDOB.LITU,OR,EBACcM,REKROWYKS
22-PE erauqS 93-MT,40-C,93-H,83-H EMIT,REKROWYKS,NALOH
32-PE dediS-6 94-OR,94-P,94-A,64-P OR,CETLA,NAMTIP
42-PE elgnatceR 02-TA,02-T HDNULPSA,TCEL-E-LET
AR42-PE dnuoR tekcuBrecilpSdnuoR"33 EMIT,ATSLET,CETLA
62-PE elgnatceR ,03-A,03-H,03-TA,82-A,82-ET,82-R03-T,E82-T
,NALOH,HDNULPSA,CETLA,OCET,REGNAR-IHTCEL-E-LET
03-PE elgnatceR 82-SA,03-S HDNULPSA,OCLETS
43-PE elgnatceR 22-R REGNAR-IH
83-PE elgnatceR 83-R REGNAR-IH
34-PE dediS-6 34-SM EBACcM
64-PE elgnatceR ,84-T,64-AL,05-H,84-A,05-ER,84-R84-ET,84-MT
,LLATFIL,EMIT,CETLA,LLA-HCAER,REGNAR-IHNALOH,OCET,TCEL-E-LET
66-PE yendiK 66-R REGNAR-IH
76-PE yendiK 76-ET OCET
86-PE yendiK 86-R REGNAR-IH
SCUFF PADS
"HY-JACKER"SIZE YOUR AERIAL LIFT BUCKET TO THE
CREW THAT USES IT!A FULL PLATFORM “HY-JACKER” CAN SOLVE
THE BUCKET DEPTH PROBLEM FOR SHORTER LINEMEN BY ADDING A SAFE 3”
OR 5” BOOST!
Designed for use on aerial lift bucket trucks
FORM #3029-C Rev.D 5/07Copyright 2007
MODEL "L" is 5" HIGH, MODEL "LS" IS 3" HIGH
• Adds three or five solid inches to the bottom of abucket -- with or without a liner.
• Rugged polyethylene shell filled with rigidpolyurethane foam for greater strength, longer life.
• Drops in place quickly, pops out easily.
MODEL #L-46
MODEL #LS-21 & #L-46
• Full bottom for maximum working comfort,convenience and safety.
• Use with a "Tru-Grit" scuff pad for extra safefooting in all kinds of weather.
• Fits virtually every aerial lift bucket in use today.
• Complete with traction pads on surface.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
*Dimensions measured on the outside of HY-JACKER and rounded off to nearest inch**Regulatory requirements in some jurisdictions specify a minimum bucket wall height of 42" + 3".
ITPLEDOM EPAHS SNOISNEMID
)WxL( #RENILITPSTIF RERUTCAFUNAMTEKCUBTFILLAIREA
91-L 91-SL ERAUQS 91X91 95-U,95-UB,95-UR,42-R REKAB,ECREIPTNUH,LLA-HCAER,REGNAR-IH
02-L 02-SL ERAUQS 02X02 CBU,04-A,14-LA,81-H YDOBYTILITU,HDNULPSA,CETLA,NALOH
12-L 12-SL ERAUQS 12X12 ,74-P,30-C,24-MT,82-H74-A,93-A,93-T,24-T
,TCEL-E-LET,EMIT,NAMTIP,NALOHCETLA,REKROWYKS
22-L 22-SL ERAUQS 22X22 93-H,83-H NALOH
32-L 32-SL DEDIS-6 02X91 64-P NAMTIP
42-L 42-SL .TCER 12X71 02-TA,02-T HDNULPSA,TCEL-E-LET
62-L 62-SL .TCER 02X62 03-A,03-H,03-TA NALOH,HDNULPSA,CETLA
82-L 82-SL .TCER 02X62 82-AL,88-H,82-MT,82-ETE82-T,82-R,82-A
-TFIL,NALOH,EMIT,OCET,CETLA,REGNAR-IHTCEL-E-LET,LLA
43-L 43-SL .TCER 12X71 22-R REGNAR-IH
34-L 34-SL DEDIS-6 12X02 34-SM EBACcM
64-L 64-SL .TCER 44X02 64-AL,84-MT,05-ER,84-R LLA-HCAER,REGNAR-IH,LLA-TFIL,EMIT
SCUFF PADS
FORM #3030-C Rev.E 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
— SECTION 6 —TOOLS & TOOL TRAYS
Round Tool Buckets/Canvas Tool Buckets/EEL Line Hose Inspection Tool
Canvas Tool Buckets & Bags Standard Bucket Hooks
Large Canvas Splicer's Bag 4 Pocket Tool Roll/Hardware Trays
Splicer Seat and Tool Box Hydraulic Crimping Head Holder
Tool Trays Intensifier Holder
Tool Trays with Docking Station Lineman’s Triple Square Wrench
Semi-Oval Poly Tool Tray Workman’s Platform
CATV Tool Trays Replacement Parts for Tool Organizers
Inside Mount Tool Tray
Omni Pouch Series
• 7 Pocket Tool Pouch
• 9 Pocket Tool Pouch
• Magnet Bar
• Knife Pouch
OPTIONAL ACCESSORIES FOR ALL TOOL TRAYS:
• Nut-Driver Holder
• Different Bracket Sizes
• Metal Frame Basket Mounting Available
Click on an item or scroll down to browse this section.
LARGE CANVAS SPLICER'S BAGOUR BIGGEST, MOST VERSATILE BAG YET!
This heavy duty SPLICER'S BAG, constructed of #4 canvaswith a molded bottom will hold more of your tools! It has 17generous inside pockets, yet is wide enough to carry meters,boxes of connectors and still get to your tools. The stiff sideshave an additional 13 outside pockets for a total of 30pockets, allowing you to carry a wide range of material.
The two sturdy web handles allow you to carry your toolsanywhere with ease. Two large brass grommets allow you tohang it off your aerial lift basket when you are aloft. Theultimate in a portable tool bag!
We recommend using PTI's PVC Bucket -Hooks* (ABH-1 forbuckets with 2" lips, ABH-2 for buckets with 3" lips) toattached your Splicer's Bag to your bucket. Both will allow youto hang the Splicer Bag either inside or outside of your aeriallift basket.
The molded bottom, standard on all PTI canvas bags, isimpervious to moisture and will prevent the bottom fromcollapsing, allowing you complete visibility to all of yourtools. We believe this is the best Splicer's Bag on the Markettoday! Why not give us a call and find out for yourself.
Model #310041 with tools(tools not included)
*S-Hooks sold separately.Model #310041 with tools(tools not included) using
carrying handles
• Canvas Buckets - Canvas buckets are available with astructural polymer construction.
• Round - Buckets made with #4 canvas. A solid non-conductivePVC ring maintains the shape, brass grommets reinforce therope holes. The polypropylene rope is offered with a brassswivel snap.
• Oval Bucket - Constructed out of #4 canvas. Non-conductivePVC top ring, side staves completely covered in canvas, solidbottom. The hook attachments are reinforced with brassgrommets. Two sizes of hooks offered, 2" or 3". *
• Complete With Hooks - Oval tool buckets include twoPolymer hooks. You choose the size. The 2" hook modelnumbers have a -2 suffix, and the 3" hook model numbers havea -3 suffix. The diameter for both 2" and 3" hooks is 11/16". *
• Line Hose Bags - constructed of heavy duty canvas or vinylnylon, and are offered in a variety of sizes. Please call if yoursize is not listed.
CANVAS TOOL BAGS ANDBUCKETS
FORM #3031-C Rev.D 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
Designed for use on aerial lift bucket trucksTOOLS & TOOL TRAYS
• At approximately 10 lbs., this splicer seat & toolboxis 40% lighter than traditional, wooden models.
• Molded from durable, impact-resistant plastic, it isvirtually indestructible and impervious to oils, dirt,grease, and a broad range of chemicals.
• The SST-10's opening is large enough to stow yourtools inside, but small enough to prevent them fromfalling out.
• The addition of a padded seat and tool pockets willincrease productivity! No longer does the technicianhave to rummage for the correct tool. It will be inplain sight and within easy reach.
• Both the 212002 and 212003 padded seats & toolpockets offer:
A large pocket that holds connectors.Three tool pockets that store drivers, pliers andother small hand tools.A leather knife sheath with screwdriver holderand quick-release snap.
SPLICER SEAT & TOOLBOXA new, improved version of an old standard!
Comfortable . . . Large Storage Capacity . . . Lightweight
SST-20 with 212002
SST-10 with 212003
FORM #2050-C Rev.E 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
Note: Also available with bumper feet. Callfor details.
S S T - 2 0
#LEDOMITP NOITPIRCSED ETAMIXORPPATHGIEW.PIHS
01-TSS xoBtaeSrecilpS sbl21
02-TSS gninepOegraLhtiwxoBrecilpS sbl21
100212 teeFrepmuBhtiwxoBrecilpS sbl31
200212 stekcoPlooT&taeSdeddaP sbl3
300212 stekcoPlooT&taeSdeddaP-artxE sbl3
400212 looThtiWtaeSdeddaP-artxEorcleVdnastekcoP sbl3
TOOLS & TOOL TRAYS
FORM #3042-C Rev.E 5/07Copyright 2007
A, B, C, and D dimensions correspond to labeled columns in the chart below.A = Edge to edge under lipB = Edge to edge under lipC = Base of tray to bottom of lipD = Depth of stand off
*See hooks on replacement parts page located later in this section.** Available in yellow, orange, or white, standard color is black.NOTE: We will install Omni-Pouches in any tray on this page. We will install Magnetic toolbars in trays on this page
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
#LEDOMITP NOITPIRCSED A B C D .sbl
BTD41 yarTlooTpeeD 91 7 42 5.2 51
BTD51 rediviDhtiwyarTlooTpeeD 91 7 42 5.2 71
BT1 sretemenilMASstiF/yarTlooTwollahS 91 8 8 5.2 7
AR-BT1 yarTlooTdevruC 91 8 8 5.2 7
WAR-BT1 etihW,yarTlooTdevruC 91 8 8 5.2 7
TR-RT1 )atsleTstif(,yarTlooTdevruC 91 8 8 5.2 7
*S-BT1 skooH-S,3-HBAhtiwyarTlooT 91 8 8 - 7
**TCS-BT1 BTC,BT3,BT1rofrevoctfoS - - - - 2
W-BT1 yarTlooTwollahSetihW 91 8 8 5.2 7
*AS-BT1 skooH4-HBAhtiwyarTlooT 91 8 8 - 7
BT2 yarTlooTelbuoD 02 41 8 5.2 01
O-BT2 egnarO,yarTlooTelbuoD 02 41 8 5.2 01
W-BT2 etihW,yarTlooTelbuoD 02 41 8 5.2 01
BT02 )mroftalPleetSstif(,yarTlooTwollahS 91 8 8 2 7
BT3 tekcuBedisnIgnitnuoMrofyarTlooTwollahS 91 8 8 - 7
310913 tekcarb2/13,tnuomedisni,yarTlooTgnoL 52 5 5 - 11
BT6 elbaTtuohtiwyarTlooT 51 01 31 5.2 01
C-BT6 tuotuchtiwyarTlooT 51 01 31 5.2 01
BTD5 yarTlooTpeeD 51 7 71 5.2 9
BTD7 )cetnavAdnaketevaWstif(yarTlooT 52.41 52.9 57.71 5.2 01
BTD8 yarTlooT 51 01 5.8 5.2 01
BT9 diLdnayarThtiwxoblooT 57.61 9 9 5.2 6
400019 )6fotes(srenetsafevitcudnoc-nontnenamreP - - 52.1 - -
WAR-SOF etihw,elbaThtiwyarTlooTdevruC 91 8 8 5.2 7
BTMW elbaT/yarTlooT 51 01 31 5.2 01
200813 dildegnihahtiwBTMW 51 01 31 5.2 11
1-BTMW potdiks-non/welbaTrecilpScitpOrebiF 51 01 31 5.2 01
ABT raBgnileveLyarTlooT - - - - 2
6-KSN )6fotes(srenetsafevitcudnoc-nontnenamreP - - 3 - 1
810913 stekcarb"2/13,tnuomedisni,yarTlooTtrohS 71 5 5 - 8
910913 stekcarb"2/12,tnuomedisni,yarTlooTtrohS 71 5 5 - 8
8-KSN )8fotes(srenetsaFevitcudnoc-noNtnenamreP - - 2/1 - 1
720913 tnuoMedistuOyarTlooTtcapmoC 52.41 5.6 8 - 6
820913 tnuoMedisnIyarTlooTtcapmoC 52.41 5.6 8 - 6
troppuSlooTgnuRreddaL
TOOLS & TOOL TRAYS
Designed for use on aerial lift bucket trucks
everyday needs!
Model #WMTB
Form #3035-C Rev.E 5/07Copyright 2007
• 1TB-SA has straight backed hooks on the inside of bucket.
• 2TB is twice the width of the 1TB to hold twice as much!Great for holding lighting components-like Street Lights orTraffic Lights.
• Any Tool Tray can be ordered with a divider, Call our SalesDepartment for Details.
• A soft cover is available to fit virtually any size Tray.
• 1TB-RA fits curved baskets with a 30" - 32" diameter such as1996 and older Altec round splicing buckets, Time/Versalift,and other round buckets.
• 1TB-RT fits curved Telsta/MTI baskets.
• Most trays available to fit metal frame baskets.
• Made from a special grade of rugged high density polyethylene.
• UV protection added.
• Trays are cold resistant.
• Provides a safe and convenient storage space for TOOLS andCATV meters.
• Fits virtually every aerial lift basket
• Custom colors available, call for details.
• PTI Brackets are designed to mount on buckets with or withoutliners.
• Permanent non-conductive fasteners available, order PTImodel #NSK-6 or NSK-8.
• Rugged polyethylene is impervious to motor oil, hydraulic oil,and a broad range of chemicals.
• The WMTB has a tray/table that will accept splicer units.
• NEW Compact Inside/Outside Tool Tray
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
ADD AN
OMNI POUCHOR
MAGNET TOOL BAR
TOOL TRAYSOver 25 Different Sizes & Configurations to meet your
Model #319027 Compact Tool Tray
TOOLS & TOOL TRAYS
Model #7DTB, 1TB-RAW, 312016, 318018 & 1TB
TOOL TRAY WITH DOCKING STATIONDesigned to hold virtually any laptop!
FORM #2101-C Rev.B 5/07Copyright 2007
• Docking Station fabricated from high quality steel with easy open release
latch to allow computer to be installed and removed easily.
• Dock can be easily moved from aerial lift basket to a cab mount assembly.
• Computer locks into Docking Station with a key to prevent mishaps while aloft.
• Universal design will hold laptops from .8” to 2” thick (with cover open) with a
simple change of optional retaining clips.
• Docking Station swivels and tilts to meet requirements of user and to allow
complete access to tool tray.
• Docking station easily removed when not in use.
DOCKING STATION
TOOL TRAY• Manufactured from rugged high density polyethelene.
• Permanently installed Docking Station bracket allows for
“drop in” installation of all PTI Docking Stations.
• Includes a 7 Pocket Omni Pouch constructed from #4 Grade canvas with brass
grommet reinforced mounting holes and a polymer backing to hold your tools
and organize your workspace.
*Measure with cover open, designed to hold computers in use.
Please call for details.
Standard tool tray is 19”x8”x8” and fits most aerial liftbaskets. Other sizes available.
Note: Docking Station also available for pen-based/hand held computers.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
#LEDOMITP NOITPIRCSED .XORPPATWGNIPPIHS
200113 tekcarBnoitatSgnikcoD/wyarTlooT sbl01
SNOITATSGNIKCOD
800913 *kciht"2ot"3.1spotpaLsdloH sbl31
900913 *kciht"6.1ot"1spotpaLsdloH sbl31
010913 *kciht"4.1ot"8.spotpaLsdloH sbl31
210913 72-FCcinosanaPsdloH sbl31
TOOLS & TOOL TRAYS
SEMI-OVAL POLY TOOL TRAY
FEATURES:
• Dimensions 18 x 12 x 10
• UV Protected
• Adjustable tool straps
• Weather resistant
• Safe and convenient storage for tools and equipment
• Fits virtually every aerial lift basket
• Made of rugged polyethylene, making it impervious to motoroil,
hydraulic oil and a broad range of chemicals.
• Available with hard or soft cover.
This product was designed for Utility workers andcompanies who are currently using aerial oval bags. Ourpolyethylene Semi-Oval features our exclusive adjustabletool loops system. The tool loops can be narrowed orexpanded to accommodate a wide range of tools, sockets,etc. Adjustable tool loops allow every user to set up theirSemi-Oval to meet their personal requirements, allowingfor needs or requirements to change over time. The traycomes standard with locations for up to 4 hooks to beutilized, giving the user unparalleled flexibility. We offersoft and hard covers which help secure the contents ofthe Semi-Oval.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
Model 319119 (hooks not included)
Model 319119 (tools and hooks not included)
Model 319119-C open (hooks not included)
Model 319119-C closed (hooks not included)
PLASTIC TECHNIQUES, INC.
TOOLS & TOOL TRAYS
Designed for use on aerial lift bucket trucks
FORM #3032-C Rev.D 5/07Copyright 2007
CATV TOOL TRAYSThe CTB Tool Tray hasa Divider and Nut DriverHolder installed. Any trayis available with a divider, call ourSales Department for details. Thenut driver holds five tools.
MODEL #CTB
MODEL#8DTB-C
MODEL#CTB-SH
MODEL #7DTB-CMODEL #3TB
The 3TB is designed to be hung on the inside of the bucket. Thestand offon the bracket has beenremoved thus allowing thetray to be hung on insideof the bucket.
The 7DTB-C has an oval opening in the center top side oppositethe brackets, and a drain hole in the floor. This allowsthe operator fullaccess to thespectrum analyzerscontrols.
The 8DTB-C has cutouts that allow the spectrum analyzerto be strapped in with the shoulder strap. These
slots are in the floor of the tool tray.
A separate Nut Driver Holderwith nylon fasteners is available, order model#CTB-SH .
PTI’s NEW Double ToolTray (2TB) is designed
to hold most CATVmonitors.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
All trays available to fitmetal frame baskets.
ITP#LEDOM NOITPIRCSED A B C D sbl
BTC rediviD&redloHrevirDtuN/wyarTlooT 91 8 8 5.2 8
HS-BTC yarTlooTrofredloHrevirDtuN - - - - 1
VID-BTC "SLIATEDROFLLAC" - - - - 1
400213 VID&HS-BTC/wBT2 02 41 8 5.2 21
C-BT6 rezylanAmurtcepSB1144GPHstiF 51 01 31 5.2 01
C-BTD8 tuotuChtiwyarTlooT 51 01 5.8 5.2 01
C-BTD7 tuotuChtiwyarTlooT 52.41 52.9 57.71 5.2 01
BT3 tekcubedisnignitnuomrofyarTlooT 91 8 8 - 8
BT2 yarTlooTelbuoD 02 41 8 5.2 -
TCS-BT1 egnarOdnawolleY(kcalbsirolocdradnatsBTC,BT3,BT1rofrevoCtfoS)elbaliava
610014 kcalB,BT2rofrevoCtfoS
TOOLS & TOOL TRAYS
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
Designed for use on aerial lift bucket trucks
INSIDE MOUNT TOOL TRAYS
319013 Long Tool Tray with Optional Magnetic Bar Installed(tools not included)
PTI’s newest tool tray is designed to mount on the insideof your aerial lift basket. It is long and narrow, to take upminimal space (only 6.5” wide from lip to lip), but longenough to accommodate your tools. We have even addedslots to hold up to 6 of your smaller tools along the lip.The addition of a TP7 Omni Pouch makes this an easilyorganized work box.
• 40% lighter than similar fiberglass models.
• Made from a special blend of rugged high densitypolyethylene which is impervious to motor oils, hydraulicoils, and a broad range of other chemicals.
• Tray is cold resistant.
• UV protection added.
Form #3200-C 5/07Copyright 2007
NOTE: We will install Omni-Pouches in any tray on this page.We will install Magnetic tool bars in trays on this page
Although it is designed to mount on the inside of your basket, outside mounts andmounts for metal frame baskets are also available. Call us for more information.
#LEDOMITP NOITPIRCSED A B C D E
510913 yarTlooTtnuoMedisnIgnoL 42 11 52.5 52.5 5.2
910913 yarTlooTtnuoMedisnItrohS 5.71 5.01 5.5 5.5 5.2
410913 yarTlooTtnuoMedisnIgnoL 42 11 52.5 52.5 3
020913 yarTlooTtnuoMedisnItrohS 5.71 5.01 5.5 5.5 3
310913 yarTlooTtnuoMedisnIgnoL 42 11 52.5 52.5 5.3
810913 yarTlooTtnuoMedisnItrohS 5.71 5.01 5.5 5.5 5.3
TOOLS & TOOL TRAYS
FORM #3088-C Rev.F 5/07Copyright 2007
• The handy, versatile tool pouch, which can be attached almostanywhere and provides easy, rapid access to your tools.
• With the Omni-Pouch, PTI has combined our canvas bags with ourrugged poly tool trays.
• Constructed from Grade #4 canvas with brass grommet reinforcedmounting holes.
• Structural polymer backing construction is standard.
• Provides an organized work storage space for tools in any PTI tooltray.
• Omni-Pouch includes mounting hardware and instructions so youcan quickly update your tool tray or tool board.
You can add 2 or 3 Omni-Pouches to most tool trays.
• Can be set up in various configurations - call with yourspecifications.
Model TP-7
This modular tool system enablesLinemen to customize their work space thereby providing acomfortable and an ergonomically sound configuration.
OMNI-POUCH SERIES
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
#LEDOMITP NOITPIRCSED
7-PT hcuoP-inmOtekcoP7
9-PT hcuoP-inmOtekcoP9
500213 hcuoP-inmO9PTenodna7PTenohtiwBT2
100413 hcuoP-inmO7PTenohtiwBTD5
710913 raBlooTtengaM
520812 gnithgiLpiLyarT/teksaB
Model TP-9
STANDARD BUCKET HOOKSMade from non-conductive PVC. They are designed tosupport the PTI aerial bucket accessories in this section. Thetool trays and canvas bags can be hung inside or outside thebucket with or without a liner, thus allowing for the widevariety of work methods in the industry. The hooks aredesigned to work on buckets with a 2-inch lip and bucketswith liners with a 3-inch lip. Hooks sold in pairs.
#LEDOMITP NOITPIRCSED
HBA sehctoNeiT/wpil"3-"2remyloPratS
2-HBA stekcubpil"3rofkooHremyloP61/11
3-HBA kooHremyloP"4/3
4-HBA gnitnuomedisnirofffotuChtiwkooHremyloP"4/3
21-HBA skooHdepahS-S"8/5
31-HBA skooHDEPAHS-S"4/3
41-HBA stekcubpil"3rofkooHtekcuBnolyN"8/5
51-HBA piLtekcuBnruteRhtiwskooH-S"4/3STYLE #ABH-14
Model 319017
TOOLS & TOOL TRAYS
STYLE #ABH
STYLE #ABH-2
STYLE #ABH-1
4-POCKET TOOL ROLL
FORM #3115-C 5/07Copyright 2007
MODEL #TD
• Four separate pockets to hold tools. Each pocket measures5" x 12" x 2.5".
• Made of white vinyl poly shell — strong, durable,lightweight, and water repellent.
• Each pocket closes with velcro fasteners.
• Rolls up for easy carrying, mounts to buckets with standard5/8" or 3/4" S-Hooks.
• Overall size 28" x 14"
• Wide variety of S-Hooks available.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
HARDWARE TRAYS
MODEL #HT-2
• Smaller tray ideal for storing or carrying hardware,crimps, and connectors.
• PTI bracket mounts anywhere on bucket rims.
• Made of rugged high density polyethylene.
• UV protection added.
• Cold resistant.
• Permanent non-conductive fasteners available,order PTI model #NSK-6 or NSK-8.
#LEDOMITP NOITPIRCSED
DT yloPlyniV)41x82(lloRlooTtekcoP-4
C-DT savnaC)41x82(lloRlooTtekcoP-4
TOOLS & TOOL TRAYS
PTI M ODEL # DESCRIPTION A B C D
HT Hardware Tray, blk 7.5 4 6 2.5
HT-2 Hardware Tray, blk 7.5 7.5 14 2.5
HT-3 Hardware Tray 7.5 4 16 2.5
Designed for use on aerial lift bucket trucks
HYDRAULIC CRIMPINGHEAD HOLDER
• Special material blend is impervious to hydraulic oils.
• Angle allows for Ergonomic alignment.
• Ultraviolet inhibitor protects from sunlight degradation.
• Promotes rapid access to tools.
• Holds Burndy Y46 Family of Hydraulic Crimp Tools,Burndy Y750 Family of Revolver Hypress, and BurndyY358H Family of Hypress.
• CP2 is made with vinyl nylon fabric. Base is reinforcedwith leatherette and has brass grommets for drainage andventilation.
• Wide variety of S-Hooks available.
FORM #3034-C 5/07Copyright 2007
Model #CHH-17A
Model #CP2
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
TOOLS & TOOL TRAYS
PTI M ODEL # DESCRIPTION SIZE APPROX. SHIP WT.
CHH-17 Crimping Head Holder 4 x 7 x 17 7 lbs
CHH-17A Crimping Head Holder, Angle 4 x 7 x 17 7 lbs
CP2 Compression Tool & Bold, Cutter Bag 10 x 9 x 19 2 lbs
PCP2 Rigid Compression Tool Holder 5 x 15 x 25 11 lbs
INTENSIFIER HOLDERFOR GREENLEE DYNAPRESS® HYDRAULIC
INSTENSIFIER• Securely holds Hydraulic Intensifier on Aerial lift Basket.
• Specifically designed to hold Greenlee Dynapress® Intensifier,Series H67 (without handle.)
• Extended protection above and below unit safeguards hydrauliccouplings from mechanical abuse and shields against brush contact.
• Special polyethylene formula is not affected by hydraulic oils andother contaminants.
• Safely holds intensifier so that it will not become dislodged frombasket in normal use while covering exposed metal and providingbasic level of mechanical shock protection for intensifier unit.
• Dynapress can be easily removed from carrier for inspection andmaintenance.
FORM #3082-C Rev.B 5/07Copyright 2007
INTENSIFIER HOLDERFOR GREENLEE FAIRMONT MODEL HB-10
HYDRAULIC INSTENSIFIER• Securely holds Hydraulic Intensifier on Aerial Lift Basket.
• Specifically designed to hold Greenlee Fairmont HB-10 HydraulicIntensifier.
• Available with couplings mounted from side to side (PTI Item219002) or top and bottom (PTI Item 219003).
• Extended protection on top and bottom or side to side safeguardshydraulic couplings from mechanical abuse and shields againstbrush contact.
• Intensifier can easily be removed from carrier for inspection andmaintenance.
• Safely holds the intensifier so that it will not become dislodged frombasket in normal use while covering exposed metal and providingbasic level of mechanical shock protection for the intensifier unit.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
#LEDOMITP NOITPIRCSED THGIEW
200912 tnuomgnilpuocedisotedisrofredloHreifisnetnI sbl4
300912 tnuomgnilpuocmottob&potrofredloHreifisnetnI sbl4
Designed for use on aerial lift bucket trucksTOOLS & TOOL TRAYS
PT I M O D EL # D ES C R IPTIO N
IH 7 1 0 - N H Intensifie r c arrie r fo r G reenlee H 6 7 S eries
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
LINEMAN’S TRIPLE SQUAREWRENCH
THREE GOOD REASONS TO USE THE LINEMAN'STRIPLE SQUARE WRENCH• Suspension Bolts• Lag Bolts• “C” Clamps
The three most common fasteners on utility poles are LagBolts, “C” Clamps, and Suspension Bolts. They require 1/2", 5/8", and 3/4" bolts, whose nuts and heads measure 3/4",1", and 11/8" across the square flats. This SINGLEWRENCH, with its 3-in-1 Socket, FITS ALL OF THESEBOLTS. It is constructed to serve trouble-free in theharsh environment to which lineman are subjected dayafter day, season after season.
LS-1 Replacement Socket
FEATURES
• LW2 Socket fits bolt sizes 1" and 1 1/8"
• Bolt-thru Socket
• 2-in-1 combination socket
• Reversible Ratchet Handle
• 3-in-1 Combination Socket
• Heavy Duty Construction
• Fast Operation
• Safer
• Replacement sockets available
FORM #3033-C 5/07Copyright 2007
The PTI “Triple Square” and "Double Square"Ratcheting Lineman’s Wrench are available in twohandle styles, as shown above. PTI Model #LW1-C,and LW2-C are heavy duty, with an all-cast construc-tion, while Model #LW1-S, and LW2-S have a ruggedstamped steel assembly. Both the LW1 and LW2handles are a full 12" in length for maximum torque. Allcome equipped with the Triple Square Bolt-ThruSocket, or the Double Square Bolt-thru Socket.
Simplifies Utility Pole Work!
#LEDOMITP NOITPIRCSED
C-1WL eldnaHtsaChtiwhcnerWerauqSelpirT
S-1WL eldnaHleetSdepmatShtiwhcnerWerauqSelpirT
C-2WL eldnaHtsaChtiwhcnerWerauqSelbuoD
S-2WL eldnaHleetSdepmatShtiwhcnerWerauqSelbuoD
COS-1WL )ylnOtekcoS(tekcoStnemecalpeRerauqSelpirT
COS-2WL )ylnOtekcoS(tekcoStnemecalpeRerauqSelbuoD
LW-2 Wrenches
Designed for use on aerial lift bucket trucksTOOLS & TOOL TRAYS
WORKMAN'SPLATFORM
Provides an extra lift whenworking from the ground.
Stable ... Durable ... Lightweight
FORM #3077-C Rev.C 5/07Copyright 2007
• Lightweight! At 28 lbs., it weighs 35% less thancomparable models.
• Platform will support up to 600 lbs.
• Non-skid surface helps prevent slips.
• Its four large legs provide stability and help preventtipping.
• The platform should be cleaned regularly because dirtand other contaminants can create a conductive pathon its surface.
• The Workman's Platform is constructed from aspecial blend of polyethylene, which is weatherresistant and impervious to hydraulic oils, pulling gels,and a broad range of chemicals. While it is moldedfrom non-conductive material, PTI has not conductedany electrical testing and does not warrantee fordielectric value.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
#LEDOMITP NOITPIRCSED .XORPPA.TW.PIHS
100518 mroftalPs'namkroW"21x"32x"92 sbl23
TOOLS & TOOL TRAYS
REPLACEMENT PARTS
12
3
45 6
7
8 9
Form #3092-C Rev.C 5/07Copyright 2007
Miscellaneous Replacement Parts
Tool Organizers
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
#LEDOMITP NOITPIRCSED
6-KSN stuNdnastloBnolyNxiS
8-KSN srenetsaFnolyNthgiE
VID elytStalF,arTlooTyloProfrediviD
VID-BTC elytS"T",yarTlooTyloProfrediviD
HS-BTC redloHrevirdwercS
7-PT swercsdnatsop/whcuoplooTtekcoP7
9-PT swercsdnatsop/whcuoplooTtekcoP9
100919 tiKgalFegnarO
400719 nocaeBrebmA
.FER.TSULLI #LEDOMITP NOITPIRCSED
1 BC-OT swercstsop/whcuoPsavnaC
2 BL-OT swercstsop/whcuoPrehtaeL
3 HT-OT swercstsop/wredloHlooT
4 SK-OT swercstsop/whtaehSefinK
5 1LL-OT swercstsop/w)egraL(poolrehtaeLenO
6 2LL-OT swercstsop/wpoolrehtaelowT
7 3LL-OT swercstsop/wpoolrehtaeLeerhT
8 TIB-OT ylbmessAredloHtiBretemaiD"1x"31
9 2SK-OT swercStsoP/whtaehSefinKegraL
TOOLS & TOOL TRAYS
Aerial Tool Tray BracketsPlastic Techniques, Inc. does not supply bracket or nylon nut and bolt assemblies for repair of tool trays. Theweld that bonds the bracket to the tool tray is critical. This must be performed in an inert atmosphere in order toattain a solid bond.
If the brackets need repair or replacement, Plastic Techniques, Inc. will, for a nominal fee, replace and repair tooltrays and bracket assemblies. Please call the sales office at (603) 645-6800 to arrange for the work to be done.
Aerial Safety LightsSee Light Pages in Sections 4 and 7 of this catalog.
Form #3091-C Rev.C 5/07Copyright 2007
Lineman's Triple Square WrenchReplacement sockets for Lineman's wrench
Tru-Fit Replacement StrapsStrap sets are made out of commercial grade, mildew resistant O.D. cotton webbing. Allstitching uses nylon twist thread in a lock stitch. Brass grommets used throughout. All hard-ware is black anodized. Order ST5/SGL for single man lid, ST5-48/66 for double man lid, ST5-30/34 for 28L32 and 30L34.
REPLACEMENT PARTS
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
#LEDOMITP NOITPIRCSED
LGS/5TS dilnamelgnisrofspartS
43/03-5TS dilflahadnanamrofspartS
66/84-5TS partSssorChtiwdilnamelbuodrofspartS
#LEDOMITP NOITPIRCSED
COS-1WL C-1WL,S-1WLroftekcosurht-tloberauqselpirT
COS-2WL C-2WL,S-2WLroftekcosurht-tloberauqselbuoD
TOOLS & TOOL TRAYS
— SECTION 7 —LIGHTING EQUIPMENT
Click on a Subject or Scroll Down to Browse this Section
Stinger® Parts and Accessories
Streamlight® Rechargeables Parts and Accessories
Stylus®, Stylus Reach™, Keymate®, 4AA LED, Septor™
Survivor® /Scorpion
Li tebox
Litebox Holder / HID Litebox & Holder
Vulcan® / Handheld Lights
Aerial Work Light UL5
UL3 Work Light
UL3 Parts & Accessories
UL-2A
UL-2A Parts & Accessories
Pole Hauling Lights
Cap Lights 3 & 5 LED
FORM #2015-C 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
Stinger®
• One continuous hour of use betweencharges
• Anodized inside and out againstcorrosion
• Virtually indestructible, roll-resistantmachined aluminum housing
• Just 73/8 inches (19.7 cm) long Weighs 10oz. (292 grams)
PolyStinger™
• One continuous hour of use betweencharges
• Virtually indestructible, non-conductive,roll-resistant, polymer case
• Just 73/8 inches (19.7 cm) long Weighs 8.7oz. (247 grams)
• Tough rubber grip won’t slip, stayscomfortable
STINGER®
Stinger ® is only 7 3/8 inches in length and 10 ounces in weight, but its com-pact size doesn’t sacrifice power and dependability. Stinger® can put out ablinding 15,000 candlepower beam from a Xenon halogen bulb that is more than amatch for much larger lights. It’s always charging and ready for action withour space-saving, snap-in charger and ready-access switch. With added featureslike a variable spot-to-flood beam and LED charge-continuity indicator, noother light can match the power and features of Stinger® - the latest inrechargeables from the leader in rechargeables.
FEATURES:
• Spare bulb in the end cap
• Indestructible roll-resistant housing ofmachined aluminum
• Anodized inside and out againstcorrosion
• Nickel Cadmium battery, for up to 1000charges and one continuous hour ofuse between charges
• Rugged nylon charger with LEDindicator tells you that Stinger® ischarging
• Self-cleaning switch
• Variable spot-to-flood beam
• Recharges on 110v or 220v AC, or 12vDC
• Solid-state circuitry allows you to storeStinger® in its charger all the time, soit’s always fully charged and ready togo.
• Limited lifetime warranty on the bodyand switch.
• One year warranty on battery andcharger
• Made in the USA
FORM #2002-C 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
#LEDOMITP NOITPIRCSED ROLOC
REGNITS R .rewopeldnac00051otpu,.zo01,gnol"8/37.ydobmunimulaydruts,tcapmoC-.bluberaps,sucofelbatsujdA.redloh/regrahcni-panS
41057 sredloh2-CD/CAhtiw
00057 ylnothgil
REGNITSYLOP MT ,gnol"8/37.ydobremylop,tnatsiserllor,evitcudnoc-nonydruts,tcapmoC-.bluberaps,sucofelbatsujdA.redloh/regrahcni-panS.rewopeldnac000,51otpu,.szo7.8
41567 sredloh2-CD/CAhtiw kcalb
20567 CDhtiw kcalb
00067 ylnothgiL wolley
00567 ylnothgiL kcalb
*NOTE: 220v adapters available for International customers only
Stinger®
MODEL #75000
PolyStinger™
LIGHTING EQUIPMENT
STREAMLIGHT® RECHARGEABLES
FORM #2006-C 5/07Copyright 2007
SL-20XThis is the light of choice for lawenforcement agencies around thecountry. It is 10 times brighterthan an ordinary flashlight,packing up to 30,000 pre-focusedcandlepower into an aircraftaluminum case. At 13 inches long,it weighs less than 2 pounds. Runtime of up to 1.5 hours.
SL-20XPThe full-size (13 inch), lighter weightpartner of the SL-20X, delivers up to25,000 pre-focused candlepower.Weighing in at only 1 pound, it hasa super-tough polymer case thatcarries a lifetime warranty, includingthe switch. Wrapped in a non-slipfoam comfort grip, it comes inyellow, safety orange and non-reflective black. Run time of upto 85 minutes.
FEATURES:
• A pre-focused quartzhalogen lamp modulethat’s covered by itsown warranty (SL-20XP,SL-20X, and SL-35Xmodels)
• A nickel-cadmiumpower cell that takes upto 1,000 charges
• Three-position switch(on/off/blink)
• An unbreakable lensthat stands up to anysituation
• O-ring sealing formaximum protectionagainst wet conditions
• LED charge continuityindicator
• Individual serializationfor easy identification
• Made in the USA
SL-20XP
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
-EGNITSITP®R
#LEDOMNOITPIRCSED ITP
#LEDOM NOITPIRCSED
11322 drocegrahcCAv011 70152 eludompmaLPX02
15022 drocrethgiletteragicCDv21 65967 ™REGNITSYLOProfylbmessarotcelfersneL
52712 drocegrahcCAv022 40957 REGNITS,dnawytefaS ® ,™REGNITSYLOP,REGNITSREPUS ® wolleY
57157 REGNITSkcitsyrettaB ® 91522 wolleYX53-LS,X02-LS,PX02-LS,dnawytefaS
07152 )yticapaChgiH(PX02-LS/51-LSkcitsyrettaB 11522 deRX53-LS,X02-LS,PX02-LS,dnawytefaS
41957 REGNITSbluB ® ™REGNITSYLOP/ 50957 retsloH REGNITS ®
41977 REGNITSREPUSbluB ®
SL-20X
AC Charge Cords DC Charge Cord
Battery Sticks Holster
Lamp Module Safety Wands
LIGHTING EQUIPMENT
PTI MODEL # DESCRIPTION COLOR PTI MODEL # DESCRIPTION
SL-20XP-Super tough polymer body with foam comfort grip. 13" long, upto 25,000 candlepower. Available in yellow, black or orange.
SL-20X - Indestructible machine tooled aircraftaluminum body. 13" long, up to 30,000 candlepower.
25041 SL-20XP with AC/DC 2 sleeves Yellow 26010 SL-20X with AC/DC 2 sleeves
25011 SL-20XP with AC/DC 2 sleeves Black
25031 SL-20XP with AC/DC 2 sleeves Orange
FORM #2065-C 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
SEPTOR™
• 7 LEDS with 3 way lighting• Runtime up to 120 hours• Water-resistant
4AA LED• Class1, Division 1-Approved• 7 LEDS• Runtime of 155 hours• Comes with helmet clamps for convenient
hands-free operation.• Dimensions: 1.69"D x 6.38"L
KEYMATE®
• Super-bright 100,000 hour LED• Machined aircraft aluminum• Run time up to 96 hours• Approximately 1 ounce
STYLUS REACH™
• Flexible cable extension allows14 inches of reach
• Unbreakable, 100,000 hourLED that never needs replacing
• Run time of up to 60 hours• Momentary “blink” or constant
“on” switching• W a t e r p r o o f
LIGHTING EQUIPMENT
SURVIVOR®
The safety-approved flashlight you can take to extremes.
• Meets Factory Mutual’s stringent requirements for use in Hazardous (Classified) Locations Class I, Division
2 Groups A, B, C, D Temperature Rating T2 and Class II, Division 2 Groups F, G Temperature Rating T4A.
• NI-CD batteries recharge up to 1,000 times and offer a 1.5 hour run per charge.
• Lightweight but rugged nylon case is O-ring sealed for water resistance. Rotary switch operates with one
hand. Stainless steel clip allows quick mounting for hands-free use.
• Removable, rechargeable battery in Division 2 model.
FEATURES:
• Convenient, cost-effective charging.
• Approved for use in hazardous (classified) locations
• Hands-free use
• Water-resistant
#LEDOMITP NOITPIRCSED ROLOC
10009 ledoMegrahCtsaF®rovivruSregrahctsafCAv011/w egnarO
20209ledoMegrahCtsaF®rovivruSetteragicregrahctsafCDv21/w
rethgilwolleY
00009ledoMegrahCydaetS
v011htobdnaredloh/regrahC/wsdrocCDv21dna
egnarO
sledomegrahCydaetShtiwesurofseirosseccAdnastraP
11322 drocegrahcCAv011
52712 drocegrahcCAv022
15022 drocegrahcrethgiletteragicCDv21
02109 ylbmessakcapyrettaB
03009 eludompmaL
SCORPION™Scorpion™, from Streamlight®, is the brightest, lightest, and smallest personallight ever developed, with more features than any other miniature light. Itseems puny at only 4.9 inches in length and 4.4 ounces in weight, but Scorpion™
produces 6,500 peak-beam candlepower from a xenon gas bulb. Using two, power-packed 3-volt lithium batteries with a 10-year shelf life, Scorpion’s™ batteriesare so durable you may even trade your car in before you need new ones. No mat-ter how long you wait to use it, Scorpion™ will still deliver up to one hour ofcontinuous run-time before new batteries are necessary. That kind of dependabil-ity is just what the industry has come to expect from the leader in portablelighting. And Scorpion™ includes advancements like a variable focus beam, a rub-ber-armored sleeve for a sure-grip, and a scratch-proof lens that makes it theperfect choice for professional or personal use. With added features like aspare bulb, a virtually indestructible machined-aircraft aluminum body and head,and O-ring sealing, Scorpion™ has everything you need in a primary, stand-by, or
back-up flashlight.
FEATURES:
• High-pressure Xenon gas bulb
• Variable spot-to-flood focus
• Only 4.9 inches (12.5 centimeters) inlength and 4.4 oz. (124.7 grams)
in weight
• Two 3-volt lithium batteries (included) provide 10-year shelf life
• Rubber-armored sleeve over machined-aluminum body
• Triple-action tail cap switch for one-handed operation
• Scratch-resistant lens
• One hour continuous run-time
• Limited lifetime warranty (except batteries and bulb)
• Made in the USA
#LEDOMITP NOITPIRCSED
10058 seirettabmuihtilhtiw™noiprocS
SEIROSSECCADNASTRAP
310058 sneL
50958 retslohnolynkcalB
41958 blubtnemecalpeR
57158 seirettabmuihtiltnemecalperowT
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
PLASTIC TECHNIQUES, INC.
LIGHTING EQUIPMENT
• Vehicle System comes complete with vehicle-mountable hard-wire rack and carrying strap.
• Standard System comes with AC and DC chargers.Its powerful beam is ideal for field maintenanceand inspection of construction sites, utilitylines and remote equipment.
• Power Failure System comes with AC/DC chargersand “smart” power failure circuitry thatautomatically goes on whenever the power goesoff.
FORM #2009-C Rev.C 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
FEATURES:
• Standardized adjustable swivel neck allows360o rotation of lamp head
• Rubberized impact bumper, lens ring andcushioned-grip handle for added toughness andcomfort
• Can be mounted to Aerial lifts with the LBHmount.
• New twin LEDs give charge feedback (red ischarging, green is fully charged)
• Call for information on Dual Beam models.
• Full range of charging options: DC (cigarettelighter), DC direct wire, and AC
• High-intensity sealed halogen beam availablein spot or flood, and dual beam options.
• Rugged high-impact ABS thermoplastic body istightly sealed for wet conditions
• Rechargeable up to 500 timesITP
#LEDOM NOITPIRCSED ROLOC STRAP
SW8/71154
metsySdradnatS®xoBetiLCDv21,CAv011sedulcnikcargnitnuomdnasregrahc
wolleY HBL steksabtfillaireAroftnuom®xoBetiL
SW8/61154 egnarO 01954 pmaLdoolFttaW02
FW02/31154 wolleY 11322 droCegrahCCAv011
FW02/11154 egnarO 52712 droCegrahCCAv022
SW02/90154 wolleY 15022 drocegrahcetteragicCDv21
SW02/01154 egnarO 17054 CD)v21(eriWtceriD
SW8/80154
metsySelciheV®xoBetiLsregrahcCDv21,sedulcni
kcargnitnuomdna
wolleY 73954 ®xoBetiLyrettaB
SW8/70154 wolleY 10954 pmaLtnemecalpeRniP-iBttaW8
SW02/40154 egnarO 20954 pmaLtnemecalpeRniP-iBttaW02
SW02/20154 egnarO 11954 pmaLtopSttaW8
SW8/60754 metsySelciheV®xoBetiLpukcabtnatsni/tnemaliFlauD egnarO 31954 pmaLtopSttaW02
SW8/30554 redluohssedulcni®xoBetiLparts egnarO 80954 pmaLdoolFttaW8
THE LITEBOX® IS AVAILABLE IN THREE MODELS
STREAMLIGHT LITEBOX®
Litebox® Power Failure
Litebox®
LIGHTING EQUIPMENT
Designed for use on aerial lift bucket trucks
FORM #2012-C 5/07Copyright 2007
• SAFE – Fully non-conductive wrap-around housing offers maximum protection.
• Design allows Lighthead to be aimed from 50 degrees below horizontal to 20degrees past vertical, with nearly a full 360 degrees side-to-side.
• Allows dual use of your rechargeable lightbox as a bucket mount work light.
• Constructed of the same quality plastics and durable bracket design youhave come to expect from PTI tool trays and aerial bucket accessories.
• BRACKET – Light will mount anywhere on the bucket rim with a PTI designedbracket.
• LBH2 - For use with lights that have shoulder strap D-Rings
STREAMLIGHT LITEBOX® HOLDER
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
#LEDOMITP NOITPIRCSED
HBL redlohxoBthgiLkcalB
O-HBL redlohxoBthgiLegnarO
Y-HBL redlohxoBthgiLwolleY
2HBL sgniR-D/wsthgil/wesuroF
H.I.D. LITEBOX® AND HOLDER
FEATURES:
• One Million Candlepower!
• Illuminates objects one mile away
• SAFE – Fully non-conductivewrap-around housing offersmaximum protection.
• Fully articulating head can beaimed precisely at target
• Design allows Lighthead to beaimed from 50 degrees belowhorizontal to 20 degrees pastvertical, with nearly a full 360degrees side-to-side.
• Constructed of the same qualityplastics and durable bracketdesign you have come to expectfrom PTI tool trays and aerialbucket accessories.
#LEDOMITP NOITPIRCSED
7101S &thgiL.D.I.HobmoCredloH
LIGHTING EQUIPMENT
POWERFULHAND HELD LIGHTS
• 750,000 Candlepower, 7" Dual Stage reflector
• Momentary rocker switch for spot or flood beam
• 100W H-2 spot bulb draws 7.8amps and 55W H-2 flood bulb draws4.3 amps
• Constructed from impact resistant Polycarbonate
FEATURES:
• 1,250,000 Candlepower, spot only, 8" Diameter.
• Aircraft Aluminum construction with pistol grip.
• Heavy Duty 16 Gauge 9' coiled cord for use in cigarette lighter.
• 12 Volt draws 7.8 amps, uses 100 Watt H-1 Bulb.
• Rubber shock absorbing ring is standard.
• Momentary and standard switches available.
#LEDOMITP NOITPIRCSED
2-LH hctiwsyratnemom/wthgilrewopeldnac000,052,1
3-LH hctiwsdradnats/wthgilrewopeldnac000,052,1
4-LH hctiwsyratnemom/wdoolf/topsthgilrewopeldnac000,057
VULCAN®
Introducing rechargeable Vulcan®, the lightweightwaterproof lantern that delivers a powerful beam
FORM #2011-C 5/07Copyright 2007
• Weight (with Battery) of less than 3.5 pounds
• Proprietary Halogen sealed beam with up to 40,000Beam candlepower.
• Waterproof to 100 feet.
• Virtually indestructable design with an engineeredplastic housing that still functions after a 20 footdrop test.
• Runs over 3 1/2 hours per charge.
• AC/DC rechargeable
• Electrical switch (FET) for long lifeand sparkless operation.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
#LEDOMITP NOITPIRCSED ROLOC
SW6/00044sedulcni,metsysdradnats®nacluV
,sregrahcCDv21,CAv021kcargnigrahcdnapartsredluohs
wolleY
STRAP
11322 droCegrahCCAv021
15022 drocegrahcetteragicCDv21
Model # 44000/6WS
MODEL #HL-2
MODEL #HL-3
MODEL #HL-4
LIGHTING EQUIPMENT
FORM #3089-C Rev.B 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
AERIAL WORK LIGHT
120 Volt AC• Safe - Insulated light housing is impervious to corrosion. Impact
resistant housing is constructed of polyethylene.
• Light - Beam is defused, or flood, pattern for optimum work spaceillumination.
• Sealed beam - Bulb housing is in a thick rubber socket; lightcomes with a protective bulb shatter guard
• Switch - The switch is housed in a neoprene jacket.
• Bracket - Light will mount anywhere on the bucket rim with a PTIdesigned bracket.
• Positioner - Light swivels and may be aimed in any direction.
• Electrical Cord - Rugged 8 foot cord standard. Self coiling andextra long cord available as options at special request.
MODEL #UL-4
UL-5 WORK LIGHT
Magnet Mount, Dual BeamThe UL-5 is a magnet mounted, dual beam utility light. This light was developedto answer requests for an extremely rugged 12 volt magnetic work light. Thehousing is excessively rugged and impervious to hydraulic and automotive oils.The material of the light head coupled with the construction of the yoke wereselected for their shock dampening characteristics. The light is a true dual beam,with two elements. This provides a true emergency light in case of an elementfailure. The light provides a nominal 100,000 candlepower beam. The utility lightassembly is secured to the vehicle with a 90 lb magnet. The power cord is anominal eight foot utility cable.
FEATURES:
• Magnet base 12 Volt Utility Light (UL-5)
• Magnet base 110 Volt Utility Light (712001)
• Model 712001 is AC powered
• Dual Beam (flood/Spot) on UL-5
• Rugged light Head
• Nominal eight foot power cord
• Bulb guard standard
• Battery clips optional
MODEL #UL-5
MODEL 712001
LIGHTING EQUIPMENT
Designed for use on aerial lift bucket trucks
FORM #3021-C REV.H 5/07Copyright 2007
LINEMAN’S UTILITY LIGHTPTI’s new UL-3 lineman’s light is proving to bequite an enhancement to our product line. Itconsists of a 200,000 candle power halogenlight which is almost 10 times brighter thanour UL-2 model. It uses a 6" diameter reflectorwith a 6.5 amp hour battery with built in DCcharger. This produces a 1 hour spot and 5 hourflood. It uses a 55 watt H-2 bulb for spot and12 wattP-2 for flood. The battery will recharge in 8hours. The UL-3 is made from a waterproof con-struction, all nonconducting thermoplastic.
With 2 bulbs, if one should burn out, the otherwill continue giving a true emergency light. Ifthe glass lens should break, the shock mountedbulb will survive. The bulbs can easily bechanged without the aid of tools, and are lessexpensive than one sealed beam.
The battery is a sealed lead acid, 6.5 amp hourwith a recharge time of 8 hours. It has both 12volt DC and 120 volt AC recharging capabili-ties. The light weighs approximately 9.5 lbs.
The UL-3 has two battery indicator lights ontop of the battery box. The Battery Conditionlight indicates the battery status during oper-ation. It glows green during operation andchanges to red when power is low (approximately25%) and is in need of charging. The ChargingStatus light indicates the battery status whencharging. The L.E.D. glows red when charging,then changes to green when fully charged and isaccepting a trickle charge.
UL-3 Includes:
Built-in BatteryCharger
Lead-Acid RechargeableBattery
115V AC Adaptor
12V Wire Harness
For side mountedhandle order #611004
UL-3A :
Same as UL-3, butincludes cigaretteplug power cord inplace of wire harness
UL-E3 Includes:
Built-in BatteryC h a r g e r
Lead-Acid RechargeableB a t t e r y
220V, 50 Cycle ACA d a p t e r
12V Wire Harness
MODEL #UL-3
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
ITP#LEDOM NOITPIRCSED
400116 eldnah/wthgilhceT
3-LU thgiLytilitUs'nameniL
A3-LU thgiLytilitUs'nameniL
3E-LU thgilelcyc05v022
3-GUB-LU)lanoitpo( drauGrettahSbluB
CP-LU)lanoitpo( droCrewoPv21
LIGHTING EQUIPMENT
LINEMAN’S UTILITY LIGHT
UL-3
Replacement Parts & Accessories
FORM #3022-C Rev. E 5/07Copyright 2007
NOTE: Part No.s UL-PC & UL-PPC
A Factory Installed
Effective 6/8/98 the UL-3 Plugs andrecepticle have been updated. If yourlight is an older version contact ourSales Office for update
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
5A
5
74
32
1
6
#MARGAID LEDOMITP# NOITPIRCSED
1 SBN-LU tungniW&tloB
2 A3-LUB-LU hgiH=topS,bluB2-HW55S
3 B3-LUB-LU woL=doolF,bluB2-PW21F
4 BHL-LU ydoBthgiL
5 3-GHC-LU regrahcv511
A5 3E-GHC-LU rgrhCnaeporuEzH05v022
6 CP-LU gulpetteragic/wdrocv21
7 CPP-LU ssenraheriwv21
NWOHSTON 3-GUB-LU draugsnellanoitpO
NWOHSTON 3-BCR-LU yrettaBelbaegrahceR A
NWOHSTON 3-SNELR-LU sneltnemecalpeR
LIGHTING EQUIPMENT
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
AERIAL SAFETY LIGHT
Battery Powered
Designed for use on aerial lift bucket trucks
MODEL #UL-2A
Safe - No exposed metal; Insulated light housing isimpervious to corrosion; Impact resistant battery housingconstructed of polyethylene.
Light - Dual beam: candle power is 25,000 on high beam,and 3,000 on low beam.
Sealed beam - Bulb housing in a thick polymer socket;light is available with an optional protective bulb shatterguard.
Battery - Uses a standard 7.5 volt battery. (Eveready #715or Ray-O-Vac #903)Not included.
Switch - A three way switch housed in a neoprene jacket.
Bracket - Light will mount anywhere on the bucket rimwith a PTI designed bracket.
Positioner - Light swivels and may be aimed in anydirection.
Rechargeable battery - Option available
Rechargeable Battery Port - a port drilled into the lightthat makes it possible to recharge the batteries withouthaving to open the top of the light as in the oldrechargeable UL-2’s.
FORM #3019-C Rev.E 5/07Copyright 2007
UTILITY LIGHT HEADS LH-5This molded light housing is designed for easy replacement of the light. Thehousing has a bonded metal channel for the mounting bracket molded in, helpingisolate the light head and reduce vibrations. This is one of the most ruggedlight heads on the market.
LH-8This powerful light delivers an impressive 200,000 + candlepower when set onspot. It uses long life halogen bulbs in a reflector designed to develop atight beam for optimal target illumination at distances in excess of 100 yards.This is coupled with a defuse flood pattern light all in the same head. Bothbulbs are shielded by tempered glass and an inch ring of polymer material forimpact protection.
Min. order qty. applyApproximate Shipping Weight: 2 lbs.
LIGHTING EQUIPMENT
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
à
à
â
AERIAL SAFETY LIGHT
Replacement Parts & Accessories
for MODEL #UL-2A
NotShown
FORM #3020-C Rev.C 5/07Copyright 2007
5 6 7 8
â
â â
â
9
4
3
2
1
2B2A
à
à
à
à
MARGAID#
ITP#LEDOM NOITPIRCSED
1 ACB-LU ylbmessAesaCyrettaB
2 TAB-LU yrettaBtloV5.7
A2 A2-BCR-LU yrettaBelbaegrahceR
B2 A2-GHC-LU regrahceRyrettaB
3 ADL-LU sedulcni,ylbmessAdiLylbmessAtuNlanimreT
4 ANT-LU ylbmessAtuNlanimreT
5 AHB-LU ylbmessAgnisuoHbluBylbmessahctiwssedulcni
6 hctiwS-LU ylbmessAhctiwS
7 LUB-LU ylbmessAbluB
8 GUB-LU ylbmessAdrauGbluBlanoitpO
9 SBN-LU tuNgniWdnatloB
LIGHTING EQUIPMENT
POLE HAULING LIGHTS
All pole hauling lights come with 2 flag holders (flags not
included) and web strap binder unless otherwise noted.
* Batteries are customer supplied.
FORM # 3435-C 03/02 Rev.5/07 Copyright 2007
Designed for use on utility line trucks
PLASTIC TECHNIQUES, INC.
Model #611001P
Approximate Shipping Weight: 20 lbs.
#LEDOMITP NOITPIRCSED
P100116 drazahydaetssthgilecnaraelc3,tloV6
P200116 rotcennoCcavleV,liaT,nruT,potS
P500116 nocaebrebma,elbaegrahcertloV21
P600116 derewopyrettab,nocaebderdilostloV6
P800116 redloHgalFgniluaHeloP
P900116 nocaeBrebmA,liaT,nruT,potS
P120116 nocaeBrebmA1,CMS2,TTS2,sthgil5tloV21
PTTS-LHP liaT,nruT,potS
21-LHP edomdrazahroydaetssesnelder2yrettabtloV21
A21-LHP edomdrazahroydaets,sesnelrebma2yrettabtloV21
P420116 nocaebder,detarepoyrettab,deltlov21,eloPdiM
P520116 nocaebrebma,detarepoyrettab,deltlov21,eloPdiM
P620116 nocaebdertnatsnoctlov6eloPdnE
P720116 nocaebder,gnihsalftlov21eloPdnE
S-LHP nocaebder,yrettabelbaegrahcertlov21
1S-LHP nocaebrebma,detarepoyrettabtlov21
SAFETY EQUIPMENT
Model #611002P
Model #611005P
Model #PHL-STTP
• Light system that attaches to back end of pole being hauled to work site.• Battery powered lights are completely independent from truck's electrical system. Provides safety warning for trailer mounted pole when detached from truck.• Two lighting modes, constant on (tail light), or flashing (hazard style).• Bright safety yellow.• Lights standard color is Red.
(Amber is available at no extra charge, please specifiy when ordering.)• Weatherproof.• Webbing and ratchet mounting system included.• Rugged O-Ring sealed units allow for easy lamp replacement. "Top Hat" style lamp bezel provides warning to rear and sides of pole.• Reflective strips provide additional protection.• Battery powered models use standard lantern batteries.
(6 volt uses Ray-O-Vac #903 or EVEREADY #715)
(12 volt uses Ray-O-Vac #926).• Two Flag Holders.• Vehicle Powered model does not include cable. (Stop, Turn, Tail functions)• Beacon now available (standard beacon color is yellow).
Model #611006P
Model #611009P
Model# PHL-S1
Model #PHL-12
LIGHTING EQUIPMENT
PLASTIC TECHNIQUES, INC.
CAP LIGHTS
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
FEATURES:
• Longer Battery life and run time than 5 LED model
• Approximately 70 hours constant on run time
• Safety mode, light flash to provide warning tomotorists
• Hands free
• Light weight, 1 oz with batteries
Excellent arms reach work area illumination. Centered onhelmet so it does not throw weight off to one side,equaling less fatigue.
Uses 2- 2032 Lithium coin cell batteries.
3 LED
5 LED
FEATURES:
• Battery life uses two 2032 coin cell batteries
• 5 Ultra bright LED's
• On/Off only, no flashing light
• Hands free
• Light weight, 1.3 oz
719003 719003 mounted onhat (hat not included)
719005 719005 mounted onhat (hat not included)
Excellent arms reach work area illumination. Centered onhelmet so it does not throw weight off to one side.
FORM #8000-C 5/07Copyright 2007
Containment Trays / Containment Vessels
Transformer Maintenance Trays / Utility Boxes
PTI's Boxes and Trays are composed of special grades ofpolyethylene. They are formulated for a long and usefulservice life.
— SECTION 8 —BOXES & TRAYS
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
At PTI, extreme durability is built into every tray.
ELEMENTS INCLUDE:
• Ultraviolet inhibitor
• Impervious to a broad range of chemicals
• Unaffected by heavy weight
• Incinerates 100%
• Custom interior options available, please call.
Click on a Subject or Scroll Down to Browse this Section
CONTAINMENT VESSELS
Containment Trays
• Contains spillage during repairs
or transportation.
• Easy to clean.
• Lightweight - easily handled by
one person.
• Trays are designed to be
nestable, easy to store.
• Made from rugged durable
polyethylene.
• Not affected by weight.
• Available in three sizes.
• Optional drain plug available
only at time of tray order.
• Incinerates 100%.
Containment Boxes
PTI’s containment boxes are
made from a high density poly-
ethylene. They are currently
available in three sizes with
more sizes to follow. The con-
tainment boxes are extremely
heavy duty but also light and
easy to lift. They can be used
for just about all your storing
needs. The tight fitting covers
keep moisture and dirt out.
* Not available with GB-Chest handles
ITP#LEDOM SNOISNEMID .XORPPA
YTICAPAC NOITPIRCSED
51-BG "51x"91x"91 snollag32 diLhtiwxoBtnemniatnoC
03-BG "21x"5.03x"51 snollag32 diLhtiwxoBtnemniatnoC
*02-BG "61x"31x"65 snollag03 diL/wxoBtnemniatnoCelbatseN
91-TMT "6x"91x"91 snollag9 yarTecnanetniaMremrofsnarT
42-TMT "5x"42x"42 snollag21 yarTecnanetniaMremrofsnarT
84-TMT "5x"63x"84 snollag73 yarTecnanetniaMremrofsnarT
65-TMT "65 X "64 X "21 snollag001 yarTtnemniatnoC
26-TMT "26 X "84 X "21 snollag021 yarTtnemniatnoC
1-PD - - gulPniarD
CONTAINMENT TRAYS(TMT-56 & TMT-62)
FORM #3041-C REV.D 5/07Copyright 2007
• Extra large capacity, TMT-56 holds
approximately 100 gallons of spillage
during repairs or transport.
• TMT-62 holds approximately 120 gallons.
• Made of rugged durable polyethylene —
lightweight, and easy to clean —
impervious to motor oil, hydraulic oil,
and a broad range of chemicals.
• Optional drain plug (DP-1) must be
specified when ordering tray.
• Two built in 16" forklift tunnels.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
MODEL #TMT-56
BOXES & TRAYS
TRANSFORMER MAINTENANCE TRAYS
MODEL #TMT-48
FORM #3005 Rev.C 8/03Copyright 2003
• Contains oil spillage (from damaged transformers) during repairs ortransportation.
• Easy to clean (after being soiled).
• Lightweight - easily handled by one person.
• Trays are designed to be nestable, easy to store.
• Made from rugged durable polyethylene.
• Not affected by the weight of any pole mounted transformer.
• Available in three sizes.
• Optional drain plug (causes minor interference with nesting). Mustbe specified when ordering.
• Incinerates 100%.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
UTILITY BOXESPTI’s “NEW” utility boxes are made from a high density polyethylene. They are currently available in three sizes with more sizesto follow.
The utility boxes are extremely heavy duty but also light and easy to lift. They can be used for just about all your storing needs.The tight fitting covers keep moisture and dirt out.
MODEL #GB-30
BOXES & TRAYS
Catalog on Disk
Guarantee
Terms and Conditions
Order Form
Repair Center
Return Policy
Test Procedures
FORM #9002-C 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-
— SECTION 9 —ORDERING INFORMATION
PTI Catalog on CD
Your lineman just put a nail through his bucket liner, and you need to
replace it fast! You reach for your PTI catalog but it’s gone. The
search for the catalog is on. Who was the last person to borrow it?
After an hour of searching you finally track it down -
only to find the liner section missing.
Does this scenario sound too familiar? Then perhaps you
should consider PTI’s new catalog on CD. If you own an
IBM-PC/compatible or a MAC computer with a CD rom
drive and have Adobe Acrobat Reader installed, then you can have the
PTI catalog at your fingertips. The CD is available free of charge.
Scroll through each page, or quick reference a product through the
Table of Contents. Plans are underway to offer electronic ordering in
the near future.
Call today to order your PTI Catalog on CD!
FORM #9003-C5 / 0 7
Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
Polyethylene Bucket Liner Guarantee
Plastic Techniques Utility Bucket Liners are molded from the best, stabilized, low
density, polyethylene available for this purpose. Each liner is carefully inspected and
dielectrically tested before shipment.
For a period of two years after the date of the guarantee, Plastic Techniques will replace this liner if it will notwithstand a one minute test at the certified test voltage (see below) or if it has a crack or other mechanical damageresulting from improper molding.
This guarantee shall not cover mechanical damage inflicted by obvious abuse. Nor shall any dielectric parameterother than voltage be guaranteed.
Defective liners must be shipped to PLASTIC TECHNIQUES, INC., GOFFSTOWN, NH -- Freight Prepaid. Upon
receipt and inspection, a replacement liner will be shipped by us (freight prepaid). Under this guarantee PlasticTechniques liability shall be limited to replacement of liners. This constitutes the complete guarantee of PlasticTechniques, Inc., expressed or implied.
GUARANTEE
DATE___________________
CERTIFIED VOLTAGE_________________
LINER SERIAL NO.____________________
N0TE: When returning a defective liner, first write for shipping instructions, giving guarantee date, liner serial number, and reason forfailure. The entire liner must be returned. If broken, all pieces must be included.
FORM #1015- F 6/93
50 KV AC RMS
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 GOFFSTOWN, NEW HAMPSHIRE 03045 TEL. 603-645-6800
9 - 3
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 ■ GOFFSTOWN, NEW HAMPSHIRE 03045-0250 ■ TEL: 603-645-6800 ■ FAX: 603-623-0918
— S
ECTI
ON
9 —
OR
DER
ING
INFO
RM
ATI
ON
Terms and Conditions of Sale1. AGREEMENT OF SALE. Any terms of Buyer’s purchase order, or any response by Buyer to this acknowledgement which are inconsistent with any terms hereof and are
not specifically accepted are not binding upon Seller. Unless Buyer shall notify in writing to the contrary promptly after Buyer’s receipt of this acknowledgement, acceptanceof the terms and conditions hereof of Buyer shall be conclusively presumed. Seller’s or Buyer’s waiver of any breach or failure to enforce any of the terms and conditionsof this contract shall not in any way affect, limit or waive such party’s right at any time to enforce strict compliance with every condition hereof.
2. PRICE. Seller may, on 10 days’ prior written notice to Buyer, increase the prices indicated on the reverse side hereof to the extent that Seller’s cost of goods orderedhereunder but not yet shipped may be increased as a result of (a) any order, rules, regulations, guideline or codes issued or promulgated in pursuance of any existingor future federal, state, or municipal legislation; (b) any increase in the cost of such goods imposed upon Seller by the suppliers of such goods; (c) any controls, restrictionsor charges imposed by governmental authority upon the sale of such goods; or (d) any increase in the cost of manufacturing goods specifically fabricated by Seller. Buyermay by written notice, delivered to the Seller prior to the effective date of any such price increase, cancel this Contract as it applies to any goods as to the price of whichparties cannot agree. Unless the contract shall be so cancelled, the increased price shall govern thereafter. Seller may, at its option, deliver the material in quantity hereinspecified from production points other than that shown, but shall not be obligated to do so, provided that such delivery shall be made at the Contract price.
3. TAXES. Price described on the reverse side hereof shall be subject to any additional charges to cover any existing or future sales, use, excise or similar taxes which Sellermay be required to pay or collect with respect to the goods covered by the Contract. All such taxes shall be for the account of Buyer except as otherwise provided by law.
4. PAYMENTS. If credit has been extended to Buyer (a) payment in full of the invoice price of goods shall be made to Seller within 30 days of Buyer’s receipt of the applicableinvoice, and invoices not paid within such 30 day period shall bear, at Seller’s option, interest at 1.5% per month; and (b) Seller reserves the right to revoke such creditif Buyer fails timely to pay for any goods previously shipped or service rendered or provided, or, if in the judgement of the Seller, there has been a material adverse changein Buyer’s financial condition. In either of such events, Seller may demand payment before further shipment of any goods or rendition of any services.
5. SHIPMENT. This is a shipment contract and the Buyer agrees to pay all transportation charges incurred in loading and shipment. If freight or other transportation costsare increased or if any additional charge or rental fee is required to be paid to manufacturer, then the Seller may add such charge or increase to the Contract price. If Sellerhas paid any such charges in advance, Buyer agrees to promptly reimburse Seller on demand. Title to and the risk of loss of goods shall pass to Buyer upon Seller’s deliveryto the shipping carrier whether or not Seller pays all or part of the freight in advance.
6. DELIVERIES. Seller shall not be responsible for failure to make delivery or delays of goods. Seller shall have the right to make delivery in installments, each of which shallbe separately billed and paid for as billed without regard to subsequent deliveries. Each installment of goods deliverable in response to the Buyer’s purchase order shallbe deemed to be sold under a separate Contract. Failure to pay for any installment when due shall excuse Seller from making future deliveries. If Seller’s consent to Buyer’sreduction of ordered quantities or to cancellation of any open balance of goods on order, the unit price for goods already delivered and for any undelivered goods shallrevert to the specified unit price for the goods actually delivered and accepted.
7. DEFECTIVE GOODS. Specifications for goods are listed in Seller’s literature and all relate to a specific part number. Buyer accepts the responsibility for determining thesuitability of such specifications to its need and ordering by Seller’s part number. Any attempt by Seller’s personnel to determine which Seller’s part number may be suitablefor Buyer’s purpose shall be done solely at Buyer’s risk. The weights, tares, tests and designations so indicated on Seller’s invoice shall govern unless proven to be incorrect.Buyer shall inspect the goods immediately following their arrival and shall, within 5 business days of such arrival, give written notice to Seller of any claim that the goods(including quantities thereof) do not conform to the terms of this Contract. If Buyer should fail to give such notice, the goods shipped shall be deemed conclusively to conformwith the terms of this Contract and Buyer shall be bound to pay for the goods. Buyer expressly waives the right that it might have to revoke acceptance after such a 5 dayperiod. Buyer assumes all risks and use of any goods, including the use of such goods alone or in conjunction with other substances or in the operation of any process,machinery or equipment. SELLER MAKES NO WARRANTY THAT ANY OF THE GOODS ARE OR WILL BE MERCHANTABLE OR FIT FOR A PARTICULAR PURPOSE.NEITHER BUYER NOR ANY FUTURE USER OF THE GOODS ARE RELYING UPON ANY REPRESENTATION OR OTHER ASSERTATION BY SELLER WITHRESPECT TO THE NATURE OR QUALITY OF GOODS BEING SOLD PURSUANT HERETO: NO CLAIM OF ANY KIND AGAINST SELLER, WHETHER AS TO GOODSDELIVERED OR FOR NONDELIVERY OF GOODS IN RESPECT TO WHICH SUCH CLAIM IS MADE THE PRICE PAID FOR GOODS IN RESPECT WHICH SUCH CLAIMMADE THE SATISFACTION OF SELLER TO BUYER WITH RESPECT TO THE GOODS SOLD OR SERVICES RENDERED WHETHER BASED UPON CONTRACTNEGLIGENCE OR OTHERWISE WITH RESPECT TO OR ARISING OUT OF THE DELIVERY AND USE OF SUCH GOODS, SHALL BE GREATER IN AMOUNT THANTHE NET INVOICE PRICE PAID FOR GOODS IN RESPECT TO WHICH SUCH CLAIM IS MADE. THE SATISFACTION OF ANY SUCH CLAIMS SHALL CONSTITUTEFULFILLMENT OF ANY AND ALL OBLIGATIONS OF SELLER TO BUYER WITH RESPECT TO THE GOODS SOLD OR SERVICES RENDERED WHETHER BASEDUPON CONTRACT, NEGLIGENCE OR OTHERWISE WITH RESPECT TO, OR ARISING OUT OF THE DELIVERY OF SUCH GOODS. If Buyer’s timely inspections andnotifications to Seller reveal any goods furnished by Seller are defective on account of faulty material or workmanship, Seller shall have the option of replacing such defectivegoods free of charge or returning to Buyer the net invoice price previously paid by Buyer for such defective goods. IN NO EVENT SHALL SELLER BE RESPONSIBLEFOR: (A) THE COST OF ANY WORK DONE BY BUYER ON GOODS FURNISHED HEREUNDER (UNLESS SPECIFICALLY AUTHORIZED BY SELLER), (B) ANY OFBUYER’S COSTS OR EXPENSES IN TESTING, INSPECTING OR PROCESSING GOODS, ANY LOST PROFITS, INJURY TO GOOD WILL OR ANY OTHER SPECIALOR CONSEQUENTIAL DAMAGES.
8. CANCELLATION. Buyer may not cancel its order wholly or in part without Seller’s prior consent, except as specified in paragraph 2 hereof. If Seller consents to suchcancellation Buyer shall be liable for the full sales price of goods shipped prior to cancellation. As to goods shipped at the time of cancellation, Buyer shall pay (i) Sellerreasonable profit plus Seller’s cost of goods, which may not be returned to the supplier for full credit and (ii) all costs of packaging and shipment, plus handling chargesof 20% of the purchase price of shipped goods which may be returned to Shipper for full credit.
9. ASSIGNMENT. Neither this Contract nor any right or obligation hereunder is assignable or transferable to Buyer in whole or in part without the prior written consent ofSeller and any purported assignment shall be void.
10. CONSTRUCTION. This Contract is intended as the final expression of the parties agreement and is the complete and exclusive statement of the terms thereof. NoStatement or agreements, oral or written, made prior to or at the signing hereof, shall vary or modify the written terms hereof; and neither party shall claim any amendment,modification or release from any provision hereof by reason of a course of action or mutual agreement unless such agreement is in writing signed by the other party andspecifically stating it is an amendment to the Contract. No modification or additions to the Contract shall be affected by the acknowledgement or acceptance by the Sellerof purchase orders, change orders releases, or other documents submitted by the Buyer containing other or different terms or conditions.
11. APPLICABLE LAW. This contract shall be construed and enforced in accordance with the laws of the State of New Hampshire.
NOTE: STANDARD TERMS: net 30 days. A finance charge of 1.5% per month or 18% per annum will be added to all items not paid in 30 days. All accounts are payable inU.S. dollars. All prepaid shipments will be subject to a handling fee of 10% of the freight charges.
FORM #9013 8/03Copyright 2003
FOR INTERNAL USE ONLYPTI ORDER NO. __________
ORDER DATE ______________
CUSTOMER NO. ___________
ORDER FORM
SHIP TO:
______________________________________
______________________________________
______________________________________
______________________________________
CONTACT & PHONE #:
______________________________________
BILL TO:
_____________________________________
_____________________________________
_____________________________________
_____________________________________
CUSTOMER PURCHASE ORDER NO:
_____________________________________
24 HOUR FAX ORDER LINE 603-623-0918
QUANTITY PTI MODEL # TOTAL(U.S. Dollars)
UNIT PRICE(U.S. Dollars)DESCRIPTION
FORM #9004-C 5/0 7
Copyright 2007
SHIPPING: _________________________________________________________________________
o UPS o FEDEX GROUND o MOTOR FREIGHT o BEST WAY o OTHER ___________________________
o COL o PPD Special Instructions: ______________________________________________
REQUESTED DELIVERY DATE: ________________
METHOD OF PAYMENT: o CBS o COD o CREDIT (Terms: Net 30) Prior Credit Approval Required
TO ENSURE CORRECT SHIPMENT, PTI MODEL # MUST APPEAR ON ALL PURCHASE ORDERS.
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
PTI Repair Center
At PTI we don’t just sell great products, we
also service those products beyond the warranty
period. That’s right... even after years of field use
if you damage a PTI product*, then we will repair it
for a nominal fee. So don’t throw away a
repairable accessory, save money and repair it!
Call our Customer Service Department
at 603-645-6800 for details.
Remember each accessory repairedis one less in our landfills!
FORM #9014-C 5/07Copyright 2007
*Damaged bucket liners are not repairable.
Return Policy
Special notes on returning new products that were shipped in error, do not fit, etc.
1. Before returning any item, you must have approval from the Sales Department ofPlastic Techniques.
2. Arrangements for returning any item as a new product must be made within 1 yearof the original shipment date.
3. Any item for return must bear the stamp containing the PTI name and the test infor-mation. We will not accept any PTI products which have had our stamp or labelremoved or which have had other stamps, labels or serial numbers printed on them.
4. Our products can be bulky and difficult items to pack for shipment; however, anyproduct returned to the factory must be completely enclosed in a shipping containerto prevent marring and scratching. We will refuse to accept any returned items thatare improperly packed and have become damaged in transit.
5. Plastic Techniques, Inc. reserves the right to refuse returns on custom made items(ie. special color, special cutouts, etc.). This does not refer to situations where wehave shipped in error.
6. All items being returned must be shipped freight PREPAID. We will advise you ofproper shipping address when you notify us prior to returning the item.
7. We will issue a CREDIT upon receipt of returned goods at our factory. Return ofsome items incurs a restocking fee of 20% (or 30% for 70kv Liners). All credit cardsales subject to a 20% restocking fee. Please see the “Terms and Conditions” sec-tion of our price list for more information.
8. PLEASE CONTACT US IF YOU HAVE ANY FURTHER QUESTIONS. This is ourcurrent return policy which is subject to updates.
FORM #0011-C 5/07Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918
PTI Test Procedures
GENERAL CONSIDERATIONS
1. Every liner shipped from PTI receives the standard electrical test of exposure to50,000 volts, AC-RMS, for one minute on the day of shipment. Liners are uncondi-tionally guaranteed to withstand a similar test for 2 years with the only exceptionbeing physical abuse caused by the user. (We can't help the situation where alineman steps in with spikes). Under our guarantee, we replace the liner - full detailsare on the guarantee certificate.
2. PTI also supplies liners tested to 70,000 volts for one minute. Extra voltage testingrequires advance ordering since the liners are slightly heavier. Special manufactur-ing considerations are also utilized to ensure uniform testing. The 70,000 voltstested liners are covered by PTI's standard guarantee.
3. Liners should be subjected to a dielectric acceptance test by the utility to guardagainst any damage in transit. Re-testing by utilities is done on widely varying ar-rangements. We are familiar with companies who re-test every month as well asorganizations who do it every two years. What is best, is up to the individual safetydepartment.
4. All PTI testing is done with AC. To compare an AC test with a DC test, the DC volt-age would have to be approximately 2.5 to 3 times the AC voltage. It should also benoted that PTI measures voltage as RMS. This is equal to approximately 100,000volts, AC, peak-to-peak.
5. Additional general information on the liners and polyethylene material is printed onthe reverse side of our basket liner data sheets.
6. For further general information on liners, please contact our Sales Department at(603) 645-6800.
FORM #9012-C5 / 0 7
Copyright 2007
PLASTIC TECHNIQUES, INC.
P.O. BOX 250 - GOFFSTOWN, NEW HAMPSHIRE 03045-0250 - TEL: 603-645-6800 - FAX: 603-623-0918