Plastic Lid & Delta Drain II...NEROTM Delta Drain II features increased inner falls and a centred...
2
Plastic Lid & Delta Drain II increased falls and a centered pipe outlet improve water flow!
Transcript of Plastic Lid & Delta Drain II...NEROTM Delta Drain II features increased inner falls and a centred...
Plastic Lid &
Delta Drain II
increased falls anda centered pipe outletimprove water flow!
B E N E F I T S A P P L I C A T I O N S S P E C I F I C A T I O N S
The new NEROTM Delta Drain II solves the issues around tight tolerances and removes the difficulty of trying to coordinate a match between drains and under floor plumbing connections.
This unique two-part catchment/connection system is comprised of a main body and lid which work in unison to provide a wide surface area for aligning and installing plumbing connections.
NEROTM Delta Drain II features increased inner falls and a centred pipe outlet for improved water flow. Uses include shower bases, linear water grate systems, toilet pans, bath wastes and other general water waste drainage.
The included Plastic Lid has been specifically designed to maintain its strength and rigidity even once your plumbing connection has been fixed. The Plastic Lid is suitable for shower bases and linear water grate systems while the optional Structural Lid allows for toilets to be mechanically fixed to comply with building standards.
FEATURES:
→ Large catchment area suitable for showers and toilets.
→ Designed to prevent backflow in the case of blockages.
→ Robust construction withstands high load pressures.
→ Removeable, easy access lid for maintenance needs.
→ Proudly designed and manufactured in Australia.
→ Moulded from industry approved plastics.
→ Both non-corrosive and UV stabilised.
330mm
130mm
300mm
160mm
18mmINCLUDED PLASTIC LID
100mm
260mm
SILANE
Demtech Australia Pty. Ltd.Support: 1300 300 090
Web: www.demtech.com.auTrademarks & Copyrights Reserved
TM
*With optional Structural Lid
*
PLUMBERS WELD
NOTE: EXAMPLE ONLYAccessories not included
