Plastic Fabrication Laser Router Cutting Acrylic …...Tel: 1300 467 527 Plain Colours: 3050 x 2050...
2
PLEXIGLAS® Hi -Gloss Clear high gloss PLEXIGLAS® is coextruded over a colour-effect layer adding a glossy touch to all your applications, making it an excellent choice for designing stylish walls and interiors. Hi-Gloss can be used in store fixtures and exhibition booths, kitchens, bathrooms, as feature walls/doors and wherever a brilliant material is required for a brilliant presentation. PLEXIGLAS Hi -Gloss ® Dirt finds it hard to adhere to the perfectly smooth surface of Hi-Gloss. Dusty surfaces can be cleaned with warm soapy water, using a soft, non- linting cloth or sponge. In the event of heavier soiling benzene-free petroleum ether or isopropyl alcohol can be used to clean Hi-Gloss (abrasive cleaners are not recommended). Do not rub dry. Hi-Gloss can be easily handled, cut and trimmed on site. Hi-Gloss is an excellent alternative to metal and glass. Where it is used as splash backs in kitchens PLEXIGLAS® Hi-Gloss should not be used directly behind or adjacent to a heat source exceeding 70º C. PLEXIGLAS® Hi-Gloss properties, from sheet processing to utilization of the finished application include: close thickness tolerances low forming temperature ease of thermoforming resistance to humid and dry air cycling good resistance to stress cracking high colour fastness to light excellent weather resistance low thermal conductivity perfectly smooth surface resistance to high temperatures according to the standard for acrylic sanitary ware resistance to wet / dry cycling according to the standard for acrylic sanitary ware
Transcript of Plastic Fabrication Laser Router Cutting Acrylic …...Tel: 1300 467 527 Plain Colours: 3050 x 2050...
PLEXIGLAS® Hi -Gloss Clear high gloss PLEXIGLAS® is coextruded over a colour-effect layer adding a glossy touch to all your applications, making it an excellent choice for designing stylish walls and interiors. Hi-Gloss can be used in store fixtures and exhibition booths, kitchens, bathrooms, as feature walls/doors and wherever a brilliant material is required for a brilliant presentation.
PLEXIGLAS Hi -Gloss ®
Dirt finds it hard to adhere to the perfectly smooth surface of Hi-Gloss. Dusty surfaces can be cleaned with warm soapy water, using a soft, non-linting cloth or sponge. In the event of heavier soiling benzene-free petroleum ether or isopropyl alcohol can be used to clean Hi-Gloss (abrasive cleaners are not recommended). Do not rub dry.
Hi-Gloss can be easily handled, cut and trimmed on site. Hi-Gloss is an excellent alternative to metal and glass. Where it is used as splash backs in kitchens PLEXIGLAS® Hi-Gloss should not be used directly behind or adjacent to a heat source exceeding 70ºC.
PLEXIGLAS® Hi-Gloss properties, from sheet processing to utilization of the finished application include:
� close thickness tolerances � low forming temperature � ease of thermoforming � resistance to humid and dry air cycling � good resistance to stress cracking
� high colour fastness to light � excellent weather resistance � low thermal conductivity � perfectly smooth surface
� resistance to high temperatures according to the standard for acrylic sanitary ware � resistance to wet / dry cycling according to the standard for acrylic sanitary ware
Tel: 1300 467 527
Plain Colours: 3050 x 2050 x 6mm # Silver - 7M801 C1 also available in 3mm thickness
PLEXIGLAS Hi -Gloss ®
Using the right tools for success
The following tools can be used with PLEXIGLAS® Hi-Gloss: Circular saws (blade with straight teeth and tooth pitch of 13mm), Jigsaws (blade with straight teeth and tooth pitch of 2.5mm), routers, drill bits suitable for use with acrylics, medium to fine machine file, compass saw max Ø 60mm (for machining
p l a s t i c s & acrylic), medium to fine machine file, scraper, conical drill, step drill, counter-
sink.
(Please note that these colours are indicative only)
Taupe —8M503 C1 Latte —1M595 C1 White —WM596 C1 Pistachio —6M530 C1 Lemon —1M800 C1
Silver — 7M801 C1 # Black —9M871 C1 Red —3M571 C1
Soft Green —6M501 C1
Paci�c Blue —5M852 C1
www.allstarplastics.com.au | [email protected]
