Plastic Clear Right Angle Mouldingmedia.outwaterads.com/web/outwaterwebsite/right-angle...*POL/B -...
Transcript of Plastic Clear Right Angle Mouldingmedia.outwaterads.com/web/outwaterwebsite/right-angle...*POL/B -...
Lengths: 12 Ft.Material: Butyrate
*WH - White *BK - BlackColors Available
Lengths: 12 Ft. • Material: Styrene
*POL/B - Polished Brass *POL/C - Polished Chrome *BRU/B - Brushed Brass *BRU/C - Brushed ChromePlease inquire as finishes vary from style to style
Finishes Available
Lengths: 12 Ft.Material: ABS/Mylar
Finishes AvailableLengths: 12 Ft.
*P, *PH (w/holes) - Mechanical Polish - Shiny/Mirror Finish *S - Satin/Clear Anodized - Dull, Matte Finish *BS, BSH (w/holes) - Brushed Satin - Lightly Brushed (Shows Grain) Satin FinishWe can also supply custom orders without holes - minimums apply - please inquire.
STAINLESS STEEL STAINLESS STEEL COUNTER EDGE SNAP-ON MOULDINGS
25/32”1”
9/16”
Back Splash Cove(Long Flange, Narrow Overlap) Grade 430 (Magnetic)
Grade 430 (Magnetic)
3/16”
5/16”
5/8”
1/16”
Not Available With Holes
Counter sunk holes spacing every 6-7”
SS801A-P
SS806-P
Counter sunk holes spacing every 7”
Punched holes spacing every 4-5”
Counter sunk holes spacing every 6-7”
Reverse cove moulding is used to cover up seams or joints wherever two perpendicular planes meet. The sink top to its backsplash or the ceiling to a wall surface represent typical applications for which our reverse cove moulding was designed. The leg of the profile seals tightly against both surfaces to lend a cleanly trimmed appearance to the finished product.
approx. .040thickness
approx. .095thickness
approx. .070thickness
approx. .095thickness
approx. .100thickness
Fits 5/16” x 7/16”.320
.450
1/4” FOAM TAPE
.200PSA TAPE.365/
.385
.345/.365
1/4”PSA TAPE.490/
.510
.470/.490
1/2”PSA TAPE
.740/.760
.720/.740
1.025.995
.320
.300
.750/
.770
.240/
.260
Cut Program AvailableSEE PAGE A-3 FOR DETAILS
Fits 3/8” Fits 1/2” Fits 3/4”
1/2”
7/16
85˚/90˚
1/2”
1/2” 85˚/90˚ 3/4”
3/4”
85˚/90˚ 1”
1”
85˚/90˚
1-1/4”
1-1/4”
85˚/90˚ 2”
2”
85˚/90˚
.8125
.500
Counter sunk holes spacing every 6-1/2”
.05
.065 - .104Counter sunk holes spacing every 6-7”
Without Tape
1-1/2”1-5/8”
9/16”
A-36 OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com
Part # 519-CL
Part # 520-CL
Part # 1748-CL
Part # 1749-CL
Part # 1750-CL
Part # 1755-CL
Part # 2206A-*
Part # SS799-P
Part # ALU669-*
Part # ALU141-PH
Part # ALU121-PH
Part # ALU1016-PH Part #
ALU426-S
Part # ALU441-PH
Part # 2406-*
Part # 2407-*
Part # 2409-*
Part # 2001-*
Part # 2163-*
Part # SS801A-PSS806-P
Plastic Color Angle Moulding w/Adhesive
Aluminum & Stainless Steel Cove Moulding
Plastic Metallic Angle Moulding w/Adhesive
Plastic Clear Right Angle Moulding
150 Ft. Coils 100 Ft. Coils 50 Ft. Coils
Colors Available*WH - White *BK - Black *BR - Brown
unless otherwise noted
Lengths: 12 Ft.Material: Styrene
Cut Program AvailableSEE PAGE A-3 FOR DETAILS
Colors Available*WH - White *BK - Black
Lengths: 12 Ft.Material: Styrene
Material: PVC • Black
(approx. .055 thickness)
(approx. .060 thickness)
(approx. .075 thickness)
(approx. .100 thickness)
(approx. .100 thickness)
(approx. .100 thickness)
(approx. .100 thickness)
Material:Rigid PVC
(approx. .125 thickness)
Fits 5/16” x 7/16” Fits 1/2” x 1” Fits 1-1/4” x 3/8” Fits 1” x 2” Fits 1” x 3”
3”
1”
R .015”
Fits 1/2” Fits 3/4” Fits 7/8”
1⁄2”Adhesive
3⁄32”19⁄64”
7⁄8”
Adhesive7⁄64”
17⁄64”
3⁄4”
Adhesive7⁄64”
17⁄64”
(approx. .040 thickness)
(approx. .062 thickness)
(approx. .050 thickness)
(approx. .040 thickness)
(approx. .040 thickness)
(approx. .050 thickness)
1-1⁄2”
1-1⁄2”
87˚/90˚
1⁄2”
1⁄2”
85˚/90˚ 5⁄8” 85˚/90˚
5⁄8”
3⁄4”
3⁄4”
90˚+0˚-3˚ 85˚/90˚
1”
1”
85˚/90˚1-1⁄4”
1-1⁄4”
57˚/63˚
1”
1”132˚/138˚
1”
1”
1⁄4”1⁄4”
1-1⁄2”
1-1⁄2”
85˚/88˚
7⁄16” 90˚
5⁄16”
1”
1⁄2”
2”
1”
1-1⁄4”
3⁄8”
(approx. .045 thickness)
A-37Phone:1-800-631-8375 • Fax:1-800-888-3315
Part # 807-631-BK
Part # 807-555-BK
Part # 807-591-BK
Part # 1919-*
Part # 1933-*
Part # 1934-*
Part # 1935-*
Part # 1936-*
Part # 1937-*
Part # 1938-*
Part # 1940-*
Part # 1951-*
Part # 1952-*
Part # 2206-*
Part # 1920-*
Part # 1441-*
Part # 1921-*
Part # 1922-*
Plastic Color Uneven Angle Moulding
Plastic Flexible Uneven Angle Moulding
Plastic Color Right Angle Moulding
*M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines *P - Polished /Mechanical- Shiny/Mirror Finish*S - Satin/Clear Anodized - Dull, Matte Finish
Special Order: Other Colors Available, Please Inquire
Finishes Available
Lengths: 12 Ft.Material: Aluminum
1/2” x 1/2”
3/4” x 3/4” 3/4” x 3/4” 13/16”x 13/16”
.500
.500 .125
.750
.750 .125
.813
.813 .063
1-1/2” x 1-1/2” 1-1/2” x 1-1/2”
1.500
1.500
.062
1” x 1”
1.000 .062
1.000
1” x 1” (135˚)
1-1/4” x 1-1/4”
1.250.062
1.250
1-1/4” x 1-1/4”
1.250
1.250.125
.500.062
.500
1/2” x 1/2”
1.500
1.500
.125
1.000
1.000
135˚
.062
1” x 1”
1.000 .125
1.000
.1875
1” x 1”
1.000 .125
1.000
3/4” x 3/4”
1” x 1”
1.000 .050
1.000
.750
.750 .0625
Mill & Polished Finish Satin Finish.750
.750 .0625R .031
.750
.750 .044
HEAVYDUTY
A-38 OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com
Part # ALU269-*
Part # ALU269-18-*
Part # ALU369-*
Part # ALU449-*
Part # ALU136-*
Part # ALU469-*
Part # ALU749-*
Part # ALU569-*
Part # ALU5569-*
Part # ALU1569-*
Part # ALU1569-18-*
Part # ALU222-*
Part # ALU444-*
Part # ALU469-135-*
Part # ALU749-316-*
Aluminum Even Angle Moulding
*M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines *P - Polished/Mechanical - Shiny/Mirror Finish*S - Satin/Clear Anodized - Dull, Matte Finish
Special Order: Other Colors Available, Please Inquire
Finishes Available
Lengths: 12 Ft.Material: Aluminum
1-1/2” x 1-1/2” 2” x 2” 2” x 2”
2.000.062
2.000
2.000.125
2.0001.500
1.500
.125.1875
2” x 2”
2.000.125
2.000
.1875
Finishes Available
Lengths: 12 Ft.Material: Aluminum
1/4” x 1/2” 3/8” x 3/4”
1/2” x 13/16” 1/2” x 1”
.500
.250.050
.750
.375.062
1.000
.500 .062
1/2” x 3/4”
3/4” x 1-1/4”
1.250
.750 .062
.750
.500 .062
*M - Mill - Dull Finish: As Extruded - May or May Not Have “Scratches”/Die Lines *P, PH (w/holes) - Polished/Mechanical - Shiny/Mirror Finish*BSH (w/holes) - Brushed Satin - Lightly Brushed (Shows Grain) Satin Finish *S - Satin/Clear Anodized - Dull, Matte Finish
.8125
.500
Counter sunk holes spacing every 6-1/2”
.05
.065 - .104
HEAVYDUTY
HEAVYDUTY
FOR STAINLESS STEEL ANGLE CORNER GUARDS,
SEE PAGE B-65
A-39Phone:1-800-631-8375 • Fax:1-800-888-3315
Part # ALU4469-*
Part # ALU8469-*
Part # ALU1569-316-*
Part # ALU4469-316-*
Part # ALU149-*
Part # ALU249-*
Part # ALU904-*
Part # ALU555-*
Part # ALU888-*
Part # ALU669-*
Aluminum Uneven Angle Moulding
Aluminum Even Angle Moulding
Lengths: 12 Ft.Material: Polypropylene
No Glides or Wheels Needed*WH - White *BK - Black*BR - Brown *AL - Almond
unless otherwise noted
Colors Available
Lengths: 12 Ft.Material: Styrene
*WH - White *BK - Black*BR - Brown *BE - Beige
Colors Available
1/4” x 1/4” x 1”
For use with:K101-606, K101-610, K101-601
Nylon Glides Are Recessed Into the DoorMounts onto 1/4” mortise
on the bottom of each door with a brad nail.
For use with: K101-606, K101-610, K101-601
For 5/8” Doors
Upper TrackK101-4079
Locking GlideR26-62
Lower TrackK101-606, 610
For 3/4” Doors
100 & 500 Ft. Coils
For 1/8” Doors* 5/32” gap
For 1/4” Doors* 5/16” gap
For 1/2” Doors* 9/16” gap
For 3/4” Doors* 13/16” gap
NOTE: ALL TRACK CAN BE MADE AVAILABLE WITH PRESSURE SENSITIVE TAPE. PLEASE INQUIRE.
Styrene
Locking GlideR26-62
Complete Set Consists Of:• 1 Upper Track • 1 Lower Track
A-40 OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com
Part # K101-4079-*
Part # K101-606-*
Part # K101-610-*
Part # K101-601-*
Part # 180-*
Part # 140-*
Part # 120-*
Part # 340-*
Part # R26-62WH
Plastic Sliding Door Track
For Light Weight Doors
Natural Nylon White Locking Glides
Upper Track
Lower Double Flat Track
Lower Single Flat Track
With or Without Peel & Stick
AdhesiveComplete Set Consists Of:• 1 x 12 Ft. Length Upper Track• 1 x 12 Ft. Length Lower Track• 1 Wheel Per Running Ft.
- OUR MOST POPULAR ASSEMBLY-Complete Set Consists Of:
• 1 x 12 Ft. Length Upper Track• 1 x 12 Ft. Length Lower Track• 1 x 12 Ft. Length Shoe• 1 Wheel Per Running Ft.
High Quality Easy-Roll Metal Ball Bearings with Economy of Plastic Track
• Lower track has sidewalls to prevent rollers from slipping off track• 1” (25.4mm) shoe allows superior gripping of glass or plywood doors• Deep upper track to allow extra clearance and easy installation• Zinc plated rollers with plastic wheel• Track & shoe material is rigid PVC
Lengths: 12 Ft. • Material: PVC • Silver Gray
For 1/4” Doors
Additional Wheels
For 1/4” Doors
NOTE: Rough Opening
Less 7/8” = Door Size
Material: Styrene • With or Without Adhesive
*BK - Black *SG - Silver GrayColors Available
NOTE: ALL TRACK CAN BE MADE AVAILABLE WITH PRESSURE SENSITIVE TAPE. PLEASE INQUIRE.
Additional Wheels
SLIDING DOOR TRACK SYSTEM WITH WHEELS
SLIDING DOOR TRACK SYSTEM WITH WHEELS
A-41Phone:1-800-631-8375 • Fax:1-800-888-3315
Part # MTR
Part # MTR2
Part # MT39-SG
Without Adhesive - Available In 12 Ft. LengthsPart #
MT38-*
With Adhesive - Available In 4 & 8 Ft. LengthsPart # Length
MT38-A4-* 4 ft.MT38-A8-* 8 ft.
Plastic Miracle Track
Plastic Miracle Track II
PRIMARY COLOR PALETTEAdd appropriate color code to part number.
PROMPT PRIMARY COLORS
STANDARD PRIMARY COLORS
Usually stocked for immediate shipment
Typically ships within 1 week
Typically ships within 3-4 weeks
Impact Protection can be found in a variety of settings, from hospitals and nursing homes, to colleges, offices, casinos, hotels and warehouses. Handrails, wall guards, corner guards and door/frame protection come in a multitude of colors, profiles and materials. Choose from stainless steel, aluminum, wood, PVC or combinations of materials to match the protection level your environment requires while at the same time complementing décor.
3 Tan
377 Teal
265 Windsor Blue
301 Linen White
210 Silver Gray
1 Black
370 Eggshell
313 Champagne
2 Ivory
676Dover White
21Cappuccino
113Toffee
269Ecru
293Sea Foam
238Bone
483Harvard Gray
10White
379Mohave Sand
371Sage Green
490Blue Bird
289Pearl Gray
541White Sand
648Monterey
682Khaki Brown
385Beige Desert
304Victorian Rose
156Hunter Green
369Blue Fog
268Doeskin
204Shell
382Stormy Blue
29Blue Ice
297Chinchilla
554Mission White
193Wheat
148Desert Sand
376Pale Jade
520Brittany Blue
5Gray
361Pearl
263Pale Yellow
497Chablis
300Grotto
583 Alexis Blue
555Porcelain
569Saffron
494Lavender Heather
176Taupe
486Caisson
359Ginger Spice
288Mocha
366Soft Peach
381Dawn
373English Rose
411Pumice
694Café Au Lait
22Woodlands
718Silkworm
4Brown
380Cordovan
255Monarch
234Plumberry
281Bermuda
421Dandelion
337Carnival Red
175Amazon
Prompt Primary colors do not apply to all products. Please refer to individual parts for inclusion.
B-61Phone:1-800-631-8375 • Fax:1-800-888-3315
NOTE: Due to fading, discoloration & paper aging, the colors on this page may vary from the actual colors.
Custom Colors - 500 ft. minimum order for color matching. Color & setup charges are on a per run basis.
Installation - Normally with screws, molly bolts or toggle bolts. Most sold separately.
Impact Protection System
MATERIAL: Textured Vinyl Cover, Available with or without Peel & Stick Adhesive Drilled options available, please inquireCLASS A FIRE RATING
(A)
(C)
(B)
(D)
Rigid vinyl 90º corner guards come in wing widths from 3/4” to 4”. Installed with either applied double sided adhesive tape, construction adhesive or mechanical fasteners. Very cost effective. Comes in 4 ft., 8 ft. or 12 ft. lengths. Provides medium duty protection. Available in full color pallet. CG*-12 is a prompt primary color.
CG-20- CG-10-
MATERIAL: Textured Vinyl Cover with Aluminum RetainerCLASS A FIRE RATING
90º surface mounted corner guard with 3” wings, is the widest protection of our vinyl covered aluminum corner guards giving maximum protection. Comes in 4 ft., 8 ft. or 9 ft. lengths. Tops caps are available for a finished look. Provides medium to heavy duty protection. Available in full color pallet and is a prompt primary color.
90º surface mounted corner guard with 2” wings, is for areas with less traffic or to blend in easily with your decor. Comes in 4 ft., 8 ft. or 9 ft. lengths. Tops caps are available for a finished look. Provides medium to heavy duty protection. Available in full color pallet and is a prompt primary color.
Protection Level: Medium-HeavyProtection Level: Medium-Heavy
Protection Level: Medium-HeavyAngle: 90º
FOR COLORS SEE PAGE B-61
CG-12-, CG-13-, CG-14-, CG-34-
3/8”(10mm)
3”(76mm)
3/8”(10mm)
3”(76mm)
Vinyl Cover Thickness:
0.100”
3/8”(10mm)
2”(51mm)
3/8”(10mm)
Vinyl Cover Thickness:
0.085”
2”(51mm)
^ 10 Ft. & 12 Ft. lengths are available - please inquire^ 10 Ft. & 12 Ft. lengths are available - please inquire
B-65a OUTWATER PLASTICS INDUSTRIES, INC. • www.outwater.com
Visit Web To View Visit Web To View
Visit Web To View
WITH ADHESIVE
Part # Length
WingDimension
"A"
Vinyl Cover Thickness
Dimension"B"
RadiusDimension
"C"
OverallProjectionDimension
"D"CGT-34-**-4 4 ft.
3/4" .080" 1/8" .080"CGT-34-**-8 8 ft.CGT-34-**-12 12 ft.CGT-12-**-4 4 ft.
1-1/2" .080" 1/8" .080"CGT-12-**-8 8 ft.CGT-12-**-12 12 ft.CGT-13-**-4 4 ft.
3" .093" 3/16" .093"CGT-13-**-8 8 ft.CGT-13-**-12 12 ft.CGT-14-**-4 4 ft.
4" .093" 3/16" .093"CGT-14-**-8 8 ft.CGT-14-**-12 12 ft.
WITHOUT ADHESIVE
Part # Length
WingDimension
"A"
Vinyl Cover Thickness
Dimension"B"
RadiusDimension
"C"
OverallProjectionDimension
"D"CGU-34-**-4 4 ft.
3/4" .080" 1/8" .080"CGU-34-**-8 8 ft.CGU-34-**-12 12 ft.CGU-12-**-4 4 ft.
1-1/2" .080" 1/8" .080"CGU-12-**-8 8 ft.CGU-12-**-12 12 ft.CGU-13-**-4 4 ft.
3" .093" 3/16" .093"CGU-13-**-8 8 ft.CGU-13-**-12 12 ft.CGU-14-**-4 4 ft.
4" .093" 3/16" .093"CGU-14-**-8 8 ft.CGU-14-**-12 12 ft.
Part # Length ^ Top CapCG-20-**-4 4 ft.
TC-20-**CG-20-**-8 8 ft.CG-20-**-9 9 ft.
Part # Length ^ Top CapCG-10-**-4 4 ft.
TC-10-**CG-10-**-8 8 ft.CG-10-**-9 9 ft.
Impact Protection SystemCorner Guards
Clear polycarbonate corner guards come in wing widths from 3/4” to 3-1/2” and angles for every need. Installed with supplied mechanical fasteners, double sided adhesive tape or construction adhesive. Clear color allows your decor to show through. Tape option is available as special order. Comes in 4 ft. or 8 ft. lengths. Provides medium duty protection.
* Standard Stocked Product
* Standard Stocked Product
MATERIAL: Clear PolycarbonateUL 94 V-2 FLAMMABILITYThe CG-16 is un-drilled and comes with brad nails. All other profiles are drilled with countersunk holes and include #6 x 1" oval head sheet metal screws.
(A)
135˚
(B)
(C)
(A) (C)
(B)
90˚
1/4”
(A) (C)
(B)
CLASS A FIRE RATING Ideal for lab and/or foot service environments!Installs easily with adhesive (sold separately). Drilled options available, please inquire.
Stainless steel corner guards in 304 Stainless with #4 Satin finish. Comes in a variety of wing sizes from 1” to 3-1/2” with choice of corner radii and angles. Installed with construction adhesive or mechanical fasteners. Ends are tapered for close-hugging look when installed. Comes in 4 ft. or 8 ft. lengths. Provides heavy duty protection.
Protection Level: Medium
Protection Level: Heavy
B-65bPhone:1-800-631-8375 • Fax:1-800-888-3315
Visit Web To View
Visit Web To View
Part # Length Angle
WingDimension
"A"
Vinyl Cover Thickness
Dimension"B"
RadiusDimension
"C"*CG-50-4 4 ft.
90˚
3-1/2"
16 GA.(059")
1/8"
*CG-50-8 8 ft.*CG-51-4 4 ft. 2"*CG-51-8 8 ft.CG-52-4 4 ft. 1"CG-52-8 8 ft.CG-55-4 4 ft. 3-1/2" 3/4"CG-55-8 8 ft.CG-60-4 4 ft.
135˚3-1/2" 1/8"CG-60-8 8 ft.
CG-65-4 4 ft. 3-1/2" 3/4"CG-65-8 8 ft.
Part # Length Angle
WingDimension
"A"
Cover Thickness
Dimension"B"
RadiusDimension
"C"CG-16-132-
4 = 4 ft.
8 = 8 ft.
90˚
3/4" .050" 1/16"*CG-17-132- 1-1/8" .075" 1/8"CG-24-132- 2" .085" 1/8"
*CG-18-132- 2-1/2" .100" 1/8"CG-25-132- 3" .110' 1/8"CG-19-132- 135˚ 2-1/2" .100" 1/8"
Impact Protection System
#4 Satin Finish 304 Grade Stainless Steel Corner Guard
Clear Polycarbonate Corner Guard