Planos de balancín (juego infantil de jardin)

7/29/2019 Planos de balancn (juego infantil de jardin)

1/42

Seesaw playground equipment Page 1 of 42

Seesaw playground equipment

They are dealing with child security on playgrounds, also the ways how to build a safe playground

construction. If you have very small child, and you are taking it on this kind of playgrounds, watch

carefully your child, so you could prevent any kind of injury or falling.

These assemblies are remarkably good for the physical development of child and its movement

coordination, so it would be a real shame to deprive the child this kind of game, just out of fear of

eventually injury, which can be prevented by focusing on your child while playing. Also, on these

playgrounds a child meets other children and develops social habits. And parents who are bringing their

children here can also bond with other parents and become friends

Carefully make the parts of the bench by the measurements given on particular pictures. The

measurements are given in millimeters, while the measurements given in inches are in brakes (1 inch =

25, 4 mm).
http://www.craftsmanspace.com/http://www.sofweb.vic.edu.au/edulibrary/public/propman/facility/PlaygroundGuidelines_2005.pdfhttp://www.cpsc.gov/cpscpub/pubs/325.pdfhttp://www.ihs.gov/nonmedicalprograms/headstart/docs/Handbook_for_Playground_Safety.pdf


2/42

Seesaw

Seesaw subassembly list
http://www.craftsmanspace.com/


3/42

Seesaw

Seesaw 2D assembly drawing


4/42

Seesaw

1. Frame subassemblyFrame parts list


5/42

Seesaw

Frame subassembly drawing


6/42

Seesaw

Frame parts


7/42

Seesaw


8/42

Seesaw


9/42

Seesaw


10/42

Seesaw

2. Rocker Arm 3400mm subassemblyRocker Arm 3400mm subassembly parts list


11/42

Seesaw

Rocker Arm 3400mm 2D subassembly drawing


12/42

Seesaw

Rocker Arm 3400mm Welding


13/42

Seesaw


14/42

Seesaw


15/42

Seesaw


16/42

Seesaw


17/42

Seesaw


18/42

Seesaw


19/42

Seesaw


20/42

Seesaw

Standard parts


21/42

Seesaw

3. Rocker Arm 4200mm subassemblyRocker Arm 4200mm parts list


22/42

Seesaw

Rocker Arm 4200mm subassembly 2D drawing


23/42

Seesaw

Rocker Arm 4200mm welding


24/42

Seesaw


25/42

Seesaw


26/42

Seesaw


27/42

Seesaw


28/42

Seesaw


29/42

Seesaw


30/42

Seesaw


31/42

Seesaw

Standard parts


32/42


Assemblage instructions

Frame Assemblage

1. Weld the Round Tubings D73 x 4mm Cut Length 1887,00mm (Part 1) to the Round Tubings D73 x 4mm CutLength 3314,00mm (Parts 2).


33/42


2. Weld the Supports (Part 4) to the construction made in the previous step following 2D documentation.


34/42


Before painting, smoothen the welded spots with a grinding machine, so the child will not get any scratches or other

harms during the play.

3. Dig the holes in the ground, as it is shown on picture below.

4. Put the Bars D12mm (Part 6) into the holes on the Round Tubings D73 x 4mm Cut Length 1887,00mm (Part 1)and the Round Tubing D73 x 4mm Cut Length 3314,00mm (Part 2). This way formed subassembly put it in theholes and then pour concrete in it and wait a couple of days, until the concrete tighten.


35/42


Rocker Arm 3400mm Assemblage

1. Weld the Seat support (Part 7) to the Round Tubing D51 x 3,6mm Cut Length 3400,00mm (Part 1)


36/42


2. To the assembly made in the previous step weld the Cover D51mm (Part 2).

3. Repeat this procedure on the other side of the Round Tubing D51 x 3,6mm Cut Length 3400,00mm (Part 1).


37/42


4. Fasten the Seats (Part 8) to the subassembly by using Washers M6 (Part 5), Hexagon Nuts M6 (Part 6) and BoltsM6 x 30mm (Part 10).

5. Weld the Hand Holders (Part 9) to the subassembly made in the previous step, following the 2D documentation.


38/42


6. Weld the Arm Supports (Part 4) and the Shell (Part 3) to the subassembly made in the previous step by followingthe 2D documentation.

Make two of these subassemblies


39/42


Before painting, smoothen the welded spots with a grinding machine, so the child will not get any scratches or other

harms during the play.

Rocker Arm 4200mm Assemblage

Form the subassembly Rocker Arm 4200mm Assemblage the same way as you formed subassembly Rocker Arm3400mm Assemblage.

Seesaw assemblage

1. Put the Rocker Arm 3400mm Assemblage between the Suports (Part 4 subassembly Frame). In this procedure,the axes of the Supports (Part 4 subassembly Frame) and Shell (Part 3 Subassembies Rocker Arm 3400mmand Rocker arm 4200mm) needs to be alined.


40/42


2. Push the Axle (Part 5 Subassembly Frame) through the Support (Part 4 subassembly Frame) and Shell (Part 3 Subassembies Rocker Arm 3400mm and Rocker arm 4200mm) and then weld it.


41/42


3. Mount the other two subassemblies in the same way.

Adjust the height of the Frame subassembly and length of the subassembly Rocket Arm to suit your child.Needed dimensions can be calculated easily by following the next picture.

Its very practical to dig in the ground some old tires on the exact spot, where the Rocket Arms touches the ground. The

idea is shown on the picture below. This way, the safety of the children is improved, and it will be easier to ride it up and

down.


42/42


Planos de balancín (juego infantil de jardin)

Documents

Transcript of Planos de balancín (juego infantil de jardin)