Place Measuring Tape at BOTTOM of Upper Rail and Measure Downward Towards the Bottom Rail

HEIGHT MEASUREMENT

(TOP)

Measure Height of Box From the Bottom of the Upper Rail to the TOP of the Bottom Rail (Measuring the Skin of the Box, This Measurement Is 90”)

HEIGHT MEASUREMENT

(BOTTOM)

Measure Length Starting at the Radius Panel Towards the Back of Box

LENGTH MEASUREMENT

(FRONT)

The Overall Length of the Box Ends at the Rear Vertical Post (601”)(Length of Skin of Box)

LENGTH MEASUREMENT

(REAR)

MVGS Unit Data Form

Date:

Carrier:

Location:

Unit #:

Make of Body:

Year of MFG:

THE BODY SIDING IS

ALUMINUM SMOOTH

FRP (FIBER REINF PLYWOOD

EXTERNAL POST

CORRUGATED HORZ.

CORRUGATED VERT.

REFRIGERATOR

REAR DOOR

ROLL-UP DOOR YES NO

SWING DOOR YES NO

LIFTGATE YES NO

LIFTGATE DECK ABOVE BELOW

IS THE UNIT TRUCK TRAILER

THE UNIT IS

14’ 16’ 18’ 20’ 22’ 24’

26’ 28’ 40’ 45’ 48’ 53’

SIDE PANELS

SIDE DOOR ON DRIVER SIDE YES NO

SIDE DOOR ON PASSENGER SIDE YES NO

SIDE DOOR USED BY CARRIER YES NO

DOT REFLECTIVE TAPE YES NO

HAZMAT PLACARDS YES NO

IS THE UNIT A WEDGE YES NO

W

H

SIDE PANEL

FRONT HEIGHT: MEASURE FROM BOTTOM OF THE UPPER RAIL TO THE TOP OF THE BOTTOM RAIL.

_________________________________________________

REAR HEIGHT: MEASURE FROM THE FRONT BOTTOM OF THE UPPER RAIL TO TOP OF THE BOTTOM RAIL.

_________________________________________________

LENGTH: MEASURE FROM THE RADIUS PANEL SEAM

TO THE FRONT OF THE REAR POST. _________________________________________________

W

H

REAR DOOR

HEIGHT: TOP OF DOOR PANEL TO ABOVE OPEN HANDLE AT LOWEST POINT.

____________________________________________

WIDTH: DISTANCE BETWEEN CABLES.

_____________________________________________

DOT TAPE

REFLECTORS REFLECTORS

KEY

SIDE DOOR

ALL MEASUREMENTS MUST BE IN TOTAL INCHES

FAX COMPLETED FORM TO 770-932-0996