PIPE TOOLS · Wrench head 1/2” Die 3/4” Die 1” Die Wrench handle Plastic case lb. 10.14 gm 1...
Transcript of PIPE TOOLS · Wrench head 1/2” Die 3/4” Die 1” Die Wrench handle Plastic case lb. 10.14 gm 1...
-
PIPE TOOLSThe extensive variety of URREA pipe tools is designed to offer professional plumbers or pipefitters maximum quality and selection in tools designed to make their work fast and accurate. There are tools for cutting, flaring, bending, fastening, and handling pipes made of copper, aluminum, steel, stainless steel, and plastic.
URREA pipe tools are ideal for installation, repair, or maintenance of systems such as compressed air, gas, water and oil, pumping systems, electricity plants, air conditioning and cold systems, and in general for the installation, maintenance and servicing of any piping system.
Regardless of the type of pipe work, URREA tools are recognized for their quality, durability, and guaranteed ease of use. Each URREA tool is specially designed to provide extraordinary service in heavy work.
Also, there are specialized pipe tools to place or remove plastic or glass pipes, or for working in corners, with tools that deliver fast and strong fastening at difficult angles.
URREA pipe tools:
• Include sets of pipe threaders, power benders, wrenches, cutters, flaring tools, pliers, and pipe fasteners.
- Selection of hand and power pipe tools. - Steel, chain, or strap jaws. - For pipes 1/8” to 12”. - Sizes 3” to 60” and 75 mm to 1,524 mm.
• They are combined and grouped in more than 11 sets in plastic or metal cases, allowing you to safely transport them and keep them organized.
• They are made of steel, malleable iron, or highly resistant aluminum.
• The jaws in pipe wrenches are hot-forged, precision machined, and heat-treated to offer the best combination of hardness, tensite strenght, and resistance to torsion.
• All URREA pipe tools are painted to resist corrosion.
• They meet national and international, American and European, standards.
• The quality image of these products is reinforced by an indelible and permanent mark showing the country of origin. This mark meets ASME/ANSI norms, as well as rules established by the Federal Trade Commission in the United States.
The information in this chapter is organized as follows:
• Technical Standards.
• Detailed Product Specifications.
• Safetyrecommendations.
-
PIPE HANDLING
PIPE MAINTENANCE
520
535
-
518
• These are used mainly on copper, aluminum, and brass pipe joints. This type of piping is used at LP gas facilities, in air conditioning, refrigeration, etc. The design and characteristics are very standardized, and are met 100% in our tools.
DOUBLE FLARING TOOLS
PIPE CUTTERS• URREA pipe cutters allow you to make
precise and uniform cuts on pipes. Ideal for use at LP gas facilities, in air conditioning, refrigeration, break lines, gasoline lines, etc.
ALLIGATOR CHAIN WRENCHES• This wrench quickly and strongly clamps
on in difficult to reach areas, such as pipes very close to each other, in a ditch or gutter.
• It works like an iron Stillson wrench with the advantage of being lighter. It’s as resistant as a Stillson because it’s made of high-quality aluminum and the body is drop-forged which, along with its design, gives it qualities similar to iron.
ALUMINUM PIPE WRENCHES
REVERSIBLE CHAIN WRENCH• This wrench is ideal for work in
hard-to-reach areas, allowing the user to loosen or fasten without having to change the wrench’s position, as when pipes are very close to a wall, in a manhole, in cornered areas or surrounded by more elements.
CHAIN VISES• Designed to fasten pipes and also used in threading, cutting, and welding
operations. The pipes can be assembled at the workshop or on location, as in the case of processing lines. They can be used with Stillson or chain wrenches, as well as with hacksaw blades.
• Thanks to its design and can-vas strap, this wrench is widely used in facilities where the piping is made of glass, PVC, plastic or any other fragile ma-terials.
UNIVERSAL STRAP WRENCH
SELF ADJUSTING PIPE WRENCHES
DIE THREADERS• Meant to make NPT threading (National Pipe Tapered Thread) on
pipes that need them. This type of thread is tapered, allowing it to create perfect seals between the piping and the accessories to which they are joined. URREA die threaders have a system for quick and easy change of dies, and these can be attached from either side.
PVC PIPE CUTTERS• This tool has a light and robust design. The handle opening is reduced.
Cutting blade feeding with no return. Minimum effort required for a quick, clean cut. They are used for installing irrigation systems, natural gas piping, electric networks, potable water, and for general plumbing.
PIPE BENDERS• Used to quickly and comfortably bend different types
of pipes. URREA’s power pipe bender is easy to use and is hand operated. Has the great advantage of being portable.
LEAK TESTING MANUAL PUMP• Easily test pressure or stagnation in pipes
carrying water or oil; composed of a hose, high-pressure joints and double-valve system ensuring constant pressure.
VARIETY OFPIPE TOOLS
MALLEABLE IRON PIPE WRENCHES• Pipe wrenches are ideal for heavy-duty
work, like that carried out at refineries, oil platforms, high-pressure pneumatic facilities, etc. The opening is adjusted by raising or lowering the MOBILE JAW with that tightens when leverage is applied.
• URREA’s self adjusting pipe wrench is 4 times faster than any wrench for standard pipes. It’s efficient, fast, and comfortable.
-
TOOLSPIPE
519
12
GGG-D-296 “Die Thread Cutting and Rethreading Collet Threading and Diesttock”GGG-F-451 “Flaring Tool Tube Hand”GGG-C-771 “Cutters Pipe and Cutters Tube”GGG-W-651 “Wrenches Pipe Wrence and Basih Wrench”GGG-V-415 “Interiw Adedment to Federal Specification Vise Pipe”
DIN 2440/22441 “Threaded Steel Tubing” 3/8” - 3/4”DIN 1786 “Hard and Soft Copper and Malleable” 3/8” - 3/4”
TECHNICAL STANDARDS APPLICABLE TO PIPE TOOLS
URREA has a great distribution
network specialized in industrial
and automotive supply.
This is of great value to our
customers because it makes your
purchases a lot easier.
You will discover that our
distributors offer great product
availability at the best price,
excellent customer service, and a
great variety of products.
THE BESTDISTRIBUTION NETWORK
URREA manufactures its tools following technical standards.A product technical standard is a document specifying design and manufacturing guidelines to ensure adequate product performance under conditions that meet users’ requirements. These standards are issued by private or governmental bodies and associations.
The only body issuing international standards is known as ISO (International Organization for Standardization). It issues the ISO 9000 series, related
to quality systems, although it also issues product technical standards. In the United States there are various associations that issue or used to issue standards, such as GSA/US FEDERAL, ASME, ANSI and SAE.
The hand tool standards known as Federal are no longer updated and are being absorbed by ASME. The same is happening to standards issued by ANSI.
Nowadays, ASME standards related to hand tools are initially reviewed by committees formed by different tool manufacturers, users, and distributors so they can be approved and issued by ASME.
www.urreaprofessionaltools.com
(800) 366-6911
-
520
PIPE MAINTENANCE TOOLS
PIPE TOOLS
Set comes in convenient sturdy plastic case
Code 852NPT Pipe threader.
URREA pipe die heads are used to create NPT threads (tapered thread). The fact that the thread is tapered allows it to create perfectly sealed joints between the pipe and other accessories. That is why it is so important to have tools that do this task with a high degree of reliability.
852THREADER FOR 1/2” TO 3/4” NPT PIPE
WITH PIPE WRENCH, PLIER AND CUTTER
850-1/2850-3/4850-1
814HD270355
CODE DESCRIPTION No.PIECES
Wrench head1/2” Die3/4” Die1” DieWrench handle14” pipe wrenchPipe pliersProfessional pipe cutterPlastic case
lb.17.64
gm8,0001
11111111
STANDARD: FEDERAL GGG-D-296
8-PIECE SET
852
PLUMBING SET
1/2”(850-1/2)
1”(850-1)
3/4”(850-3/4)
852
VISIT US ONLINE
(800) 366-6911
For your conven ience, the
products in this catalog can be
found at our Online Catalog at
www.urreaprofessionaltools.com
a quick and free service available
24 hours a day. Thanks to its
specialized search engine you
can quickly and easily find the
products you are looking for.
PIPE HANDLING TOOLS
-
TOOLSPIPE
521
12
PIPE MAINTENANCE TOOLS
PIPE TOOLS
1/2”850-1/2
3/4”850-3/4
1”850-1
1 1/4”850-1 1/4
1 1/2”850-1 1/2850HA
850RH
2”850-2
Set comes in convenient sturdy plastic case including a can of lubricant for dies.
851 850
851THREADER FOR 1/2” TO 2” NPT PIPE
850RH850-1/2850-3/4850-1850-1 1/4850-1 1/2850-2850HA
CODE DESCRIPTION No. PIECES
Wrench head1/2” Die3/4” Die1” Die1 1/4” Die1 1/2” Die2” DiePipe threader die adaptorLubricant oilPlastic case
lb.23.15
gm10,5001
111111111
STANDARD: FEDERAL GGG-D-296
9-PIECE SET
NOTE: If you wish to complement your set, the case includes an empty spot for a 3/8” die that you may acquire separately.
850THREADER FOR 1/2” TO 1” NPT PIPE
850-1/2850-3/4850-1
CODE DESCRIPTION No. PIECES
Wrench head1/2” Die3/4” Die1” DieWrench handlePlastic case
lb.10.14
gm4,6001
11111
STANDARD: FEDERAL GGG-D-296
5-PIECE SET
Dies and wrench heads manufactured with CNC technology(Computer-assisted machining)
Wrench head allows quick and easy die changes.
Set comes in convenient sturdy plastic case.
NOTE: If you wish to complement your set, the case includes empty spots for 3/8” and 1 1/4” dies that you may acquire separately.
PIPE THREADING DIE SETS
1/2”850-1/2
3/4”850-3/4
1”850-1
PIPE HANDLING TOOLS
-
522
PIPE DIE THREADERS
Easy-to-use handle for 1 1/2” and 2” dies.
Off-centered handle of ratchetenables work being done
in confined areas.
850RH
850HAPIPE THREADER DIE ADAPTER
LENGTHDIE CAPACITY
lb.0.62
mm150
mm6 - 31.75
gm.280
in.6
in.1/4 - 1 1/4
STANDARD: FEDERAL GGG-C-771d
850RHDIE HEAD
RATCHET HANDLE
DIES DIE CAPACITY
HANDLES
1 1/2”, 2”1lb.5.9
gm2,400
STANDARD: FEDERAL GGG-D-296
850HA850-2
850-1/2P
NPT REPLACEMENT THREADER DIES
CODE
850-3/8P850-1/2P850-3/4P850-1P850-1 1/4P850-1 1/2P850-2P
Threading die, 3/8” NPTThreading die, 1/2” NPTThreading die, 3/4” NPTThreading die, 1” NPTThreading die, 1 1/4” NPTThreading die, 1 1/2” NPTThreading die, 2” NPT
DESCRIPTION
NPT PIPE THREADING DIE HEADS
CODE
850-3/8850-1/2850-3/4850-1850-1 1/4850-1 1/2850-2
Die head, 3/8” NPTDie head, 1/2” NPTDie head, 3/4” NPTDie head, 1” NPT
Die head, 1 1/4” NPTDie head, 1 1/2” NPT
Die head, 2” NPT
DESCRIPTION
For use on sets 850, 851, 852 and 862. For use on sets 850, 851, 852 and 862.
PIPE MAINTENANCE TOOLS
PIPE TOOLS
PIPE HANDLING TOOLS
4186
This tool cuts hard to reach pipes made of stainless steel, copper, PVC, etc., very easily and comfortably.
Butterfly screw allows controlled and progressive adjustments while cutting.
13 steel alloy cutting wheels.Evenly cut hard to reach pipes with walls up to 2.6 mm.
4186
PIPE CUTTERS
Ideal for cutting escape pipes on the spot.
It eliminates the need for manual tightening and facilitates cut alignment.
The locking mechanism eliminates manual tightening, reducing the risk of lateral movements and misaligned cuts.
Makes even cuts.
CHAIN PIPE CUTTERS
CAPACITYSIZE
lb.1.76
mm12.7 - 63.5
mm254
gm800
in.1/2 - 2 1/2
in.10
-
TOOLSPIPE
523
12
PIPE CUTTERS
355
359
For thick-wall metal pipes.
Extension bar to apply greater torque.
Instantaneous change of cutting wheels without using tools.
356
URREA iron pipe cutters cut iron pipes evenly and precisely thanks to their cutting wheels and ergonomic design that helps intensify pressure on hard materials like galvanized pipe.
• Forgedsteelbody.• Springycutwheelsystemresults inbettercutsand
longer cutting wheel durability.
FORGED STEEL PIPE CUTTERS
STANDARD: GGG-C-771d
CODE CUT DIAMETER
LENGTH
355356359
in.1/8 to 1 1/8
1/8 to 22 to 4
mm3 to 28.63 to 50.851 to 102
in.1 7/8
2 13/3226 3/8
mm47.660.0670
gm114024607600
lb.2.515.42
16.75
PIPE MAINTENANCE TOOLS
PIPE TOOLS
PIPE HANDLING TOOLS
Ergonomic knob for comfortable cut.
Has 4 rollers that optimize the cut.Aluminum die-cast
body.
Quick tightening system. Guide and knob made of zamak.
350QR
Instant change system for swapping out cutting wheels without tools.
Includes spare cutting wheel.
350QR QUICK ADJUST PIPE CUTTER
STANDARD: FEDERAL GGG-C-771d
in.1/4 to 2 5/8
CUT DIAMETER
mm6 to 66
in.12 1/2
LENGTH
mm320
gm882
lb.1.94
For thin-wall pipes.
-
524
PIPE CUTTERS
PIPE CUTTERS
STANDARD: GGG-C-771d
CODE
348350
in.1/8 to 5/8
1/8 to 1 1/8
CUT DIAMETER
mm3.2 to 15.873.2 to 28.57
in.35
LENGTH
mm75
127
gm105290
lb.0.230.64
350
348
Compact size makes it easy to carry around (cuts mini-pipes).
350D19G
350D19C
350D19S
355D26M
355D31M
359D41M
CODE D (mm)
19
19
19
26
31
41
d (mm)
4.85
4.85
4.85
7.6
9.0
9.7
w (mm)
6.20
6.20
6.20
14
19
28
2
2
2.5
5.5
6
10
Material Thicknesspipe max.
(mm)
Blades for pipe cutters Pipe cutters
348 350 355 356 359 350P 350QR
Aluminium, cooper, stainless steel
Aluminium, cooper
Stainless steel
Steel
Steel
Steel
350D19C 350D19S
For copper and aluminum pipes and thin-wall conduit pipe.Ratcheting mechanism allows use in difficult-to-access areas.Self-feeding blade system for automatic cuts.Resistant light nylon handle.
PIPE CUTTER RATCHET
STANDARD: GGG-C-771d
gm180
lb.0.39
in.1/8 to 1/2
SIZE
mm3.2 to 12.7 760
VOLUMECM3
in.5
LENGTH
mm127
357
355D31M
350D19G
355D26M
Replacement blades for pipe cutter
D
W d
Convenient long threaded screw for ease of use.
350P
Extra light knob controlled advance for smooth cutting trajectory around the pipe with minimal effort.
Zamak die-cast body, guide and knob.
Rollers located close to one end permits a good cut at the final ends of the pipe.
For thin-wall pipes.
Spare cutting wheel in model 350
350P 1/8” TO 1 3/8” PIPE CUTTER
STANDARD: FEDERAL GGG-C-771d
in.1/8 to 1 3/8
CUT DIAMETER
mm3 to 35
in.6
LENGTH
mm150
gm460
lb.1.01
Includes spare cutting wheel.
357
PIPE MAINTENANCE TOOLS
PIPE TOOLS
PIPE HANDLING TOOLS
-
TOOLSPIPE
525
12
PVC AND PIPE FLARING TOOLS AND CUTTERS
Mainly used to join copper, aluminum, and brass pipes. These types of pipes are used at LP gas facilities, in air conditioning, refrigeration, etc. The design is very standardized, meeting specific needs for these unions. Our tools satisfy these needs 100%.
349FLARING TOOL AND 1/8” TO 1 1/8” PIPE CUTTER
350351
4029
CODE DESCRIPTION No. PIECES
Pipe cutter, 1/8” to 1 1/8”Double flaring tool, 3/16” to 5/8”Metal box
111
STANDARD: GGG-C-771d, GGG-F-451c
3-PIECE SET
3513/16” TO 5/8” DOUBLE FLARING
TOOL
STANDARD: GGG-F-451c
FLARING DIAMETER
in.3/161/4
5/163/81/25/8
mm4.86.37.99.512.715.8
gm830
lb.1.83
This tool features a light and ergonomic design. Cutting blade feeds with no return. Applications include installation of irrigation systems, natural gas piping and electrical networks, potable water systems, and general plumbing.
330 PVC PIPE CUTTERS
TOTAL LENGTHCUT LENGTH
gm432
mm240
in.9 7/16
in.0 to 1 5/8
mm0 to 42
lb.0.95
349
351
Quick and easy interchangeable system.
Spare cutting wheel.
At the initial position the cutting blade is sheathed, providing greater safety.
PTFE-Coated blade for faster cuts.
330
Code 330Pipe cutters
These precision pipe cutters are your best ally when working with PVC pipes, tubing, and installations; adjust the jaw opening according to the pipe’s diameter, apply force on the ergonomic handles and the blade will begin feeding, progressively cutting and leaving behind a clean cut.
PIPE MAINTENANCE TOOLS
PIPE TOOLS
PIPE HANDLING TOOLS
-
526
766
100% savings on soldering materials.Robust construction for any type of job.Compact and easy to transport.
For gas pipes, DIN-2440 and DIN-2441 (schedule 40).
Note: For better results it is recommended to bend pipes with a wall thickness greater than 2.7 mm (0.109”) (For example: schedule 40 galvanized pipe).
Monoblock hydraulic system, with automatic return piston.
765766
1/2”••
3/4”••
1”••
1 1/4”••
1 1/2”••
2”••
2 1/2”
•
3”
•
B E N D I N G D I E S
MANUAL HYDRAULIC PIPE BENDERS
STANDARD: GGG-B-191c
CODE
765766
gm58,998
110,499
lb.130.07243.61
in.1/2 - 21/2 - 3
PIPE DIAMETER
mm12.7 - 50.812.7 - 76.2
ton15 t20 t
CAPACITY
Includes tripod.
CONDUIT PIPE BENDERS
STANDARD: GGG-B-175A
CODE
CPB13CPB19CPB25
gm500880
1,300
lb.1.101.943.75
Conduit pipe:1/2” thin wall
3/4” and 1/2” thick wall1” and 3/4” thick wall
4”5”6”
APPLICATIONSBENDING RADIUS
HANDLE BENDERS FOR SCHEDULE 40 CONDUIT PIPE
CODE
HCB1HCB2
gm980
1,850
lb.2.164.08
in.3/41
in.4060
DIAMETER LENGTH
mm19.0525.40
mm10161524
Note: HCB1 for bending 1/2” and 3/4”. HCB2 for bending 1”.
CPB13
HCB1
Handle made of schedule 40 black sheet metal, with electrostatic paint finish.Anti-slip grip.
Made of aluminum for the best weight-resistance ratio.
A n t i - s l i p support pedal.
Degree scale at the base allows calculation of bend angle.
Threaded NPT base for screwing in the handle.
CONDUIT PIPE BENDERS
PIPE BENDERS
PIPE MAINTENANCE TOOLS
PIPE TOOLS
PIPE HANDLING TOOLS
-
TOOLSPIPE
527
12
PIPE YOKE VISE
STANDARD: GGG-V-415
CODE
450452
in.1/8 to 21/8 to 4
CAPACITY
mm3 to 50
3 to 101
gm510010800
lb.11.2423.81
PIPE CHAIN VISE
STANDARD: FEDERAL GGG-V-415
bar90 mm
kg3,900
in.7 7/8
in.10 1/4
mm200
mm260
LENGTH WIDTH
FASTENING CAPACITY
DIMENSIONSCHAIN LOAD
CAPACITY
pipe2 1/2” NPT
gm4,345
lb.9.58
210
452
210
Floating upper jaw fits perfectly to the pipe’s shape.
Manufactured with high-resistance iron.
Reinforced fleyer chain supports approximate rupture loads of 3,900 kg. according to ASA 760 standard.
Main body made of malleable iron.
Electrostatic paint.
Light and collapsible, made of aluminum alloy.
Remains perfectly solid on all three legs.
Aluminum base with pipe benders for 3/8”, 1/2” and 3/4”.
Orifices for attaching chain vises or yokes.
D
C
B
A
CHAIN VISE, PIPE VISES AND WORK STOOL
WORK STOOLS
464
To facilitate work on any type of pipe, the URREA work stool offers the best option in size, weight and performance.
DIMENSIONS
gm14000
lb.30.86
in.36 5/8
in.53 1/2
in.14 3/16
in.12 5/8
mm930
mm1360
mm360
mm320
A B C D
Easily attaches to shelves, workbenches, etc.
PIPE MAINTENANCE TOOLS
PIPE TOOLS
PIPE HANDLING TOOLS
-
528
Link: 2x2
Code 796CAlligator chain wrench.
An indispensable tool to handle industrial and commercial piping. URREA chain pipe wrenches fasten quickly and strongly in the most difficult positions. In addition, they are designed to offer extra leverage for the roughest work and for large diameter pipes. The two jaws can be inverted for even more efficient fastening from either side.
HEAVY DUTY ALLIGATOR CHAIN WRENCHES
STANDARD: FEDERAL GGG-W-651 TYPE III
CODE
794C795C796C797C798C799C
in.1 1/22 1/2
46812
MAX. PIPE SIZE
mm38.163.5101.6152.4203.2304.8
in.13 3/426 3/437 1/247 1/450 1/263 3/4
LENGTH
mm350680950112012801620
in. 1 1/2
22 1/2
33 1/83 5/16
mm38.552.063.078.080.084.0
CHAIN WIDTH
A
L
B
gm1,4003,5006,70012,60017,00024,200
lb.3.097.7214.7727.7837.4853.35
INDUSTRIAL GRADE ALLIGATOR CHAIN WRENCHES
STANDARD: FEDERAL GGG-W-651 TYPE III
CODE
794UR795UR796UR797UR798UR799UR
in.1 1/22 1/2
46812
MAX. PIPE SIZE
mm38.163.5
101.6152.4203.2304.8
in.13 3/4
2837 1/247 1/450 1/263 3/4
LENGTH
mm350711950112012801620
in.1 1/22 1/22 1/2
33 1/8
3 5/16
in.5/83/43/4 111
506060808080
kgf310048007900150001500015000
mm38.163.563.576.279.384.1
mm15.919.119.125.425.425.4
lbf68341058217417330693306933069
CHAIN WIDTH
ANSINo.
STEPP
WORK LOADLIMIT
A
L
B
gm140035006700126001700024200
lb.3.097.7214.7727.7837.4853.35
ALLIGATOR CHAIN WRENCHES
R794C
REPLACEMENT ALLIGATOR CHAIN FOR CHAIN WRENCHES
CODE
R794CR795CR796CR797CR798CR799C
gm244400986
2,6423,3164,556
lb.0.540.882.175.827.3110.04
For 794CFor 795CFor 796CFor 797CFor 798CFor 799C
in.5/83/43/4111
506060808080
kgf3,1004,8007,90015,00015,00015,000
in.1317
21 3/4313854
mm15.919.119.125.425.425.4
lbf6,83410,58216,75533,06933,06933,069
mm3304325527879651372
DESCRIPTION LENGTHSTEPP
ANSINo.
WORK LOAD LIMIT
This wrench fastens quickly in difficult positions, such as pipes very close to each other, in a ditch or gutter.
Double jaws can be inverted for efficiantgripping action on any side.
796C
796UR
PIPE MAINTENANCE TOOLS
PIPE TOOLS
PIPE HANDLING TOOLS
This wrenches can use the replacement alligator chain R794C to R799C instead.
in.5/83/43/4 111
506060808080
kgf310048007900150001500015000
mm15.919.119.125.425.425.4
lbf68341058217417330693306933069
ANSINo.
STEPP
WORK LOADLIMIT
-
TOOLSPIPE
529
12
Code 801Universal reversible chain wrench.
For hard to reach pipes; URREA reversible chain wrenches allow you to either loosen and tighten the pipe without changing the wrench’s position.Designed for easy operation in sharp corners where other wrenches cannot be used.High capacity and comfortable weight.
ALLIGATOR CHAIN WRENCHES
gm.750
in.12
WRENCH LENGTH
mm304.8
in.4
in.3/4
in.5/16
in.17 9/32
MAX. PIPE SIZE
mm101.6
mm19.0
WRENCH WIDTH
mm8.0
mm439
CHAIN WIDTH
CHAIN LENGTH
C
L
AB
lb.1.65
UNIVERSAL REVERSIBLE CHAIN WRENCH FOR PIPES UP TO 4”
STANDARD: FEDERAL GGG-W-651 TYPE III
801
Special tooth design.
High capacity and comfortable weight.
PIPE MAINTENANCE TOOLS
PIPE TOOLS
PIPE HANDLING TOOLS
Thanks to its design and canvas strap, this wrench is widely used in facilities where pipes are made of glass, PVC, plastic or any other fragile material.
Very resistant nylon canvas allows better and faster fastening without damaging the surfaces.
Strap wrench ideal for plastic and chromed pipes.
Wrench made of a special aluminum alloy, making it light and resistant.
STRAP WRENCH FOR UP TO 3” PIPE
gm275
in.12
WRENCH
mm305
in.3
PIPE MAX. SIZE
mm76
mm42
in.1 11/16
in.1 1/16
WRENCH WIDTH
mm27
mm432
in.17
STRAP WIDTH
STRAP LENGTH
lb.0.61
802
802
UNIVERSAL STRAP WRENCH
801
-
530
8348
SELF ADJUSTING PIPE WRENCHES
CODE
83488358
gm900
1,650
lb.1.983.63
in.1014
LENGTH
mm254355
in.1/4 - 1 1/2
1/2 - 2
CAPACITYSpring-loaded pin designed to withstand force both ways.
Ergonomic handle made of ductile cast-iron with a semi-texturized powder epoxy finish providing a better grip.
This wrench self adjusts to the pipe’s size without using both hands.
Sel f-adjust ing jaw made of forged steel.
1/2”
1 1/4”
3/4”
1 1/2”
1”
2”
SELF ADJUSTING PIPE WRENCHES
URREA’s self adjusting pipe wrench is 14 times faster than any standard pipe wrench, delivering efficiency, swiftness and comfort.
It’s one-handed, fast, and easy to use, and will fit pipes: ½” - 3/4” - 1” - 1 1/4” - 1 1/2” and 2”. The gripping mechanism is ideal for efficiently joining threaded pipes.
Ideal fastening for any type of piping.
Special teeth design allows perfect grip.
Fixed jaw made of steel alloy.
PIPE MAINTENANCE TOOLS
PIPE TOOLS
PIPE HANDLING TOOLS
INDISPUTABLEQUALITY LEADERSHIP
www.urreaprofessionaltools.com
(800) 366-6911
The quality of URREA tools
exceeds international
manufacturing standards
(ISO, ANSI, ASME, SAE, GSA,
DIN, DGN, EMA, ANCE, VDE).
When buying a URREA tool,
you are purchasing the best
tools in the world.
-
TOOLSPIPE
531
12
836A
ALUMINUM PIPE WRENCH
(40% lighter)
Works just like an iron Stillson wrench with the advantage of being lighter. This wrench is just as resistant as our iron pipe wrenches, due to its design and because its body is drop-forged from one aluminum piece, enabling a similar hardness.
HEAVY DUTY ALUMINUM PIPE WRENCHES
CODE
810A814A818A824A836A
in.1 1/2
22 1/2
35
MAXIMUM PIPE SIZE
mm38.150.863.576.2127.0
in.1014182436
LENGTH
mm254356457610914
STANDARD: GGG-W-651E
mm2226293344
in.7/8
1 1/321 5/321 5/161 3/4
B
mm17.021.026.028.032.5
in.11/1627/321 1/161 1/81 9/32
C
C
B
AL
gm490930
1,5702,6005,000
lb.1.082.053.465.7311.02
Code 824AAluminum Stillson Wrenches
Features all the advantages of a conventional Stillson wrench but is 40% lighter; this is why URREA’s aluminum pipe wrenches are essential to carry out heavy work.
Furthermore, URREA’s aluminum pipe wrenches incorporate the non-spark system, allowing them to be used in heavy-duty work in the petrochemical and electrical industries, among others, without posing unnecessary risks.
CODE(ALUMINUM)
810A814A818A824A836A
SIZE
12”18”24”36”48”
MOBILE JAW55-6055-6055-6055-6055-60
FIXED JAW55-6055-6055-6055-6055-60
STANDARD FEDERAL GGG-W-651
MIN. ENLARGE-MENT RANGE
1/2”-1 1/4”1”-2”
1/2”-2 1/2”2 1/2”-3 1/2”
3” - 5”
NUT32-4832-4832-4832-4832-48
TORSION LOAD LB.
(ALUMINUM)6,00011,50018,00025,00040,500
HARDNESS °RC
HEAVY DUTY ALUMINUM PIPE WRENCHES
Adjustable tempered and threaded nut with an internal seated spring that gives better grip and perfect ratcheting action.
Forged and double heat-treated upper jaw.
Drop-forged body made of high-resistance aluminum alloy.
Fixed lower jaw positioned to prevent overload on the pin.
PIPE MAINTENANCE TOOLS
PIPE TOOLS
PIPE HANDLING TOOLS
-
532
PIPE MAINTENANCE TOOLS
PIPE TOOLS
PIPE HANDLING TOOLS
INDUSTRIAL GRADE ALUMINUM PIPE WRENCHES
Adjustable tempered and threaded nut with an internal seated spring that gives better grip and perfect ratcheting action.
Drop-forged body made of high-resistance aluminum alloy.
Forged and double heat-treated upper jaw.
814AUR
INDUSTRIAL GRADE ALUMINUM PIPE WRENCHES
CODE
810AUR814AUR818AUR824AUR836AUR
in.1 1/2
22 1/2
35
MAXIMUM PIPE SIZE
mm38.150.863.576.2127.0
in.1014182436
LENGTH
mm254.0355.6457.2609.6914.4
STANDARD: GGG-W-651E
mm22.226.229.033.344.5
in.7/8
1 1/321 9/641 5/161 3/4
B
mm16.721.025.828.232.5
in.21/3253/641 1/641 7/641 9/32
C
C
B
AL
gm490930155024005000
lb.1.082.053.425.2911.02
VISIT US ONLINE
(800) 366-6911
For your conven ience, the
products in this catalog can be
found at our Online Catalog at
www.urreaprofessionaltools.com
a quick and free service available
24 hours a day. Thanks to its
specialized search engine you
can quickly and easily find the
products you are looking for.
-
TOOLSPIPE
533
12
The classic Stillson pipe wrench for extra-duty work. Adequate measurements for each application.
Comfortable handle design is strong without being too heavy.
Spring jaw system for great clamping action and quick release.
Replaceable heat-treated steel alloy jaws. The knurled nut
easily slides the upper jaw.
Super reinforced jaw mounting.
818HD
814UR
Spring-loaded jaw system for great clamping action and quick release.
Knurled nut is easy to adjust.
Chrome-vanadium steel jaws.
Pipe wrenches are ideal for all types of heavy work like at refineries, oil platforms, high pressure pneumatic facilities, etc. They allow you to adjust the opening’s size by raising or lowering the mobile jaw using a spring-loaded adjustable screw system that tightens when leverage is applied.
CODE(IRON)
808HD & 808UR810HD & 810UR812HD & 812UR814HD & 814UR818HD & 818UR824HD & 824UR836HD & 836UR848HD & 848UR
860HD
SIZE
8”10”12”14”18”24”36”48”60”
BODY(IRON)25-4025-4025-4025-4025-4025-4025-4025-4025-40
MOBILE JAW
55-6055-6055-6055-6055-6055-6055-6055-6055-60
FIXED JAW
55-6055-6055-6055-6055-6055-6055-6055-6055-60
TORSION LOAD LB.
(IRON)3,3007,000
10,00013,00020,00028,00045,50050,000126,000
STANDARD FEDERAL GGG-W-651
MIN. APPLICATION RANGE
1/4”-3/4”1/4”-1”
1/2”-1 1/4”1/2”-1 1/2”
1”-2”1/2”-2 1/2”
2 1/2”-3 1/2”3” - 5”3” - 8”
NUT32-4832-4832-4832-4832-4832-4832-4832-4832-48
NUT SYSTEM40-4940-4940-4940-4940-4940-4940-4940-4940-49
HARDNESS °RC
CODE
808UR810UR812UR814UR818UR824UR836UR848UR
in.1
1 1/222
2 1/2356
in.9/163/4
15/161 1/161 5/321 5/161 3/42 7/32
in.9/16
11/1627/32
7/81 1/161 1/8
1 9/321 7/16
MAX. PIPE SIZE
mm25.438.150.850.863.576.2127.0152.4
in.810121418243648
LENGTH
mm203.2254.0304.8355.6457.2609.6914.4
1,219.2
mm14.019.023.026.029.033.044.056.0
B
mm14.017.019.322.726.028.032.536.0
C
C
BA L
gm340860
1,1801,7602,3204,4009,76015,740
lb.0.751.892.603.885.119.7021.5234.70
INDUSTRIAL GRADE MALLEABLE IRON PIPE WRENCH
STANDARD: GGG-W-651E
CODE
808HD810HD812HD814HD818HD824HD836HD848HD860HD
in.1
1 1/222
2 1/23568
MAX. PIPE SIZE
mm25.438.150.850.863.576.2127.0152.4203.2
in.81012141824364860
LENGTH
mm203.2254.0304.8355.6457.2609.6914.41219.21524.0
mm14.019.023.026.029.033.044.056.083.8
in.9/163/4
15/161 1/161 5/321 5/161 3/42 7/323 5/16
B
mm14.017.021.021.026.028.032.536.043.0
in.9/16
11/1627/3227/321 1/161 1/8
1 9/321 7/161 23/32
CC
BA L
gm340800
1,2001,6002,6004,4008.70015,60019,700
lb.0.751.762.653.535.739.7019.1834.3943.43
HEAVY-DUTY MALLEABLE IRON STILLSON WRENCH
STANDARD: GGG-W-651E
MALLEABLE IRON PIPE WRENCHES
PIPE MAINTENANCE TOOLS
PIPE TOOLS
PIPE HANDLING TOOLS
-
534
Monoblock I-beam handle made of aluminum alloy.
Jaw specially designed for work in tight areas.
Design allows wider opening capacity.
Jaws made of h e a t - t r e a t e d steel alloy.
INDUSTRIAL GRADE ALUMINUM OFFSET PIPE WRENCHES
in.2
2 1/2
in.1 31/321 5/32
in.15/161 3/32
gm8001400
MAX. PIPE SIZE
mm6177
in.1418
LENGTH
mm355.6457.2
mm2429
B
mm2327
C
lb.1.763.09
STANDARD: GGG-W-651 TYPE II CLASS C
The FIXED JAW is known as the heel jaw. It is a small steel part forged with the same hardness and shape characteristics as the mobile jaw.
The heel jaw is mounted on the wrench’s body and is fastened with a pressure-fit steel pin that goes through the holes, fastening the jaw to the body.
Thread compatible with Stillson wrenches. Produced under the strictest standards to ensure greater durability and performance.
CODE
808B810B812B814B818B824B836B848B
8” Pipe wrench10” Pipe wrench12” Pipe wrench14” Pipe wrench18” Pipe wrench24” Pipe wrench36” Pipe wrench48” Pipe wrench
DESCRIPTION
gm100210300350800100030003400
lb.0.220.460.660.771.762.206.617.5
MOVABLE HOOK JAWS
CODE808C810C812C814C818C824C836C848C
8” Pipe wrench10” Pipe wrench12” Pipe wrench14” Pipe wrench18” Pipe wrench24” Pipe wrench36” Pipe wrench48” Pipe wrench
DESCRIPTION
FIXED HEEL JAW AND PINS
CODE808D810D812D814D818D824D836D848D
8” Pipe wrench10” Pipe wrench12” Pipe wrench14” Pipe wrenchPipe wrench 18”24” Pipe wrench36” Pipe wrench48” Pipe wrench
DESCRIPTION
KNURLED ROLLER NUT
836B
836C
836D
The MOBILE JAW is forged of high quality steel and is machined to a high degree of precision, allowing the knurled adjusting nut to rotate easily. It is heat-treated. The teeth have the necessary hardness for strong and reliable clamping.
10” and 12” aluminum pipe wrenches must have the hook jaw knurled roller together, if ither needs to be replaced, because the pitch of the thread on the hook jaw and the replacement nut are different.
REPLACEMENT PARTS FOR PIPE WRENCHESFor 14”, 18”, 24”, 36” & 48” HEAVY-DUTY (all) iron pipe wrenches and aluminum pipe wrenches. Any single piece can be replaced singly, or the whole set can be replaced.
OFFSET PIPE WRENCHES
Knurled nut allows quick and safe jaw adjustments.
PIPE MAINTENANCE TOOLS
PIPE TOOLS
PIPE HANDLING TOOLS
818AO
-
TOOLSPIPE
535
12
Easily test pressure or stagnation of pipes transporting water or oil. URREA’s leak testing manual pump contains a hose, high-pressure joints and a valve system ensuring constant pressure.
To test for leaks in plumbing, heaters, refrigeration, oils, etc.
Contents:1.- Galvanized container resistant to outdoors and low temperatures.2.- Easy-to-read gauge. 870 PSI and MPA scales, 60 bar.3.- High-pressure hose.4.- High-pressure joints5.- Valve ensures constant pressure.6.- Operation lever. a).- 2.6 gal intake volume. b).- Polyamide pistons with no distortion, resistant to friction and wear. c).- Easy-to-read PSI and MPA gauge scales. d).- R hose 1/2” connection.
LEAK TESTINGMANUAL PUMP
LEAK TESTING MANUAL PUMP
768
DIMENSIONSCAPACITY
gm8000
lb.17.64
bar0 to 60
lt10
mm500 x 185 x 140
Checkout pump connected to the circuit and close the valve.
CLOSE
Fill the circuit with fluid and bleed the air, seal all opennings.CLOSE
O�E�Pump the liquid in the circuit to the pressure test (verify that there is no drop in pressure)
Check finishes, eliminate the pressure by oppening the valve.
Checkout pump connected to the circuit and close the valve.
CLOSE
Fill the circuit with fluid and bleed the air, seal all opennings.CLOSE
O�E�Pump the liquid in the circuit to the pressure test (verify that there is no drop in pressure)
Check finishes, eliminate the pressure by oppening the valve.
Checkout pump connected to the circuit and close the valve.
CLOSE
Fill the circuit with fluid and bleed the air, seal all opennings.CLOSE
O�E�Pump the liquid in the circuit to the pressure test (verify that there is no drop in pressure)
Check finishes, eliminate the pressure by oppening the valve.
Checkout pump connected to the circuit and close the valve.
CLOSE
Fill the circuit with fluid and bleed the air, seal all opennings.CLOSE
O�E�Pump the liquid in the circuit to the pressure test (verify that there is no drop in pressure)
Check finishes, eliminate the pressure by oppening the valve.
Instructions:
768
1
5
4
2
3
6
•2.6galintakevolume.•PSIandMPAscales.•1/2”joint.
PIPE HANDLING TOOLS
PIPE TOOLS
PIPE MAINTENANCE TOOLS