pipe dims
-
Upload
mike-mcclernan -
Category
Documents
-
view
214 -
download
0
Transcript of pipe dims
-
8/22/2019 pipe dims
1/13
nom OD wt ID class eqiuv pr class
4.00 4.80 0.32 4.16 53 350
6.00 6.90 0.34 6.22 53
8.00 9.05 0.36 8.33 53 4.525 0.37708
10.00 11.10 0.38 10.34 53 5.55
12.00 13.20 0.40 12.40 53 6.6 0.55
14.00 15.30 0.42 14.46 53
16.00 17.40 0.43 16.54 53
18.00 19.50 0.44 18.62 53
20.00 21.60 0.45 20.70 5324.00 25.80 0.47 24.86 53
36.00 32.00 0.51 30.98 53
36.00 38.30 0.58 37.14 53
nom OD wt ID class
4.00 4.80 0.26 4.28 51
6.00 6.90 0.28 6.34 51
8.00 9.05 0.30 8.45 51 5.56
10.00 11.10 0.32 10.46 51
12.00 13.20 0.34 12.52 51
14.00 15.30 0.36 14.58 51
16.00 17.40 0.37 16.66 51
18.00 19.5 0.38 18.74 51
20.00 21.60 0.39 20.82 51
24.00 25.82 0.41 25.00 51
36.00 38.30 0.48 37.34 51
check pipe class
nom OD wt ID class
4.00 Not Available - 50 350 ?
6.00 6.90 0.25 6.40 50
8.00 9.05 0.27 8.51 5010.00 11.10 0.29 10.52 50
12.00 13.20 0.31 12.58 50
14.00 15.30 0.33 14.64 50
16.00 17.40 0.35 16.70 50 8.7
18.00 19.50 0.35 18.80 50
20.00 21.60 0.36 20.88 50
24.00 25.82 0.38 25.06 50
36.00 38.30 0.43 37.44 50
-
8/22/2019 pipe dims
2/13
http://www.acipco.com/
Inside Are for P= 150 psi
sf force 21600 psf
0.09439 2038.77
0.21101 4557.87
0.37846 8174.69
0.58313 12595.7
0.83863 18114.4
1.14042 24633
1.4921 32229.4
1.89098 40845.1
2.33705 50480.33.37077 72808.7
5.23468 113069
0.78
18 50
Size in.
Thickness
Class
-
8/22/2019 pipe dims
3/13
dip/pipe/pressures-weights/weights-specials.cfm
Per Foot Per Per Foot Per
0.35 64.4 68 1365 - -
Wall
Thickness in.
Weight in Pounds
Per Foot
Plain End
FASTITE
JOINT
MECHANICAL
JOINT*
-
8/22/2019 pipe dims
4/13
IPS sizes HAVE BEEN USING THE SDR ID'S ASSUMING THE 4% EXTRA AL
SDR Nom OD ID wall thickness SDR (Check)
8.625
11 6.625
160 psi
10.75 8.7960 0.9770 11.00
10.75 8.7178 1.01608 10.58 The WALL thickness i
10.75 8.6788 1.03562 10.38 Driscopipe - The WAL
1.06
17 16.00 14.1200 0.94 17.02
100 psi
36 31.7640 2.1180 17.00
adder 36 31.5946 2.20272 16.34 The WALL thickness i
0% 10 10.75 9.4860 0.6320 17.01
4% 10.75 9.4354 0.65728 16.36 The WALL thickness i
6% 10.75 9.4102 0.66992 16.05 Driscopipe - The WAL1.06
0% 8 8.63 7.6110 0.5070 17.01
4% 8 8.63 7.5704 0.52728 16.36 The WALL thickness i
6% 8 8.63 7.5502 0.53742 16.05 Driscopipe - The WAL
0% 6 6.63 5.8450 0.3900 16.99
4% 6 6.63 5.8138 0.4056 16.33 The WALL thickness i
6% 6 6.63 5.7982 0.4134 16.03 Driscopipe - The WAL
0% 12 12.75 11.2500 0.7500 17.00
4% 12 12.75 11.1900 0.78 16.35 The WALL thickness i
6% 12 12.75 11.1600 0.795 16.04 Driscopipe - The WAL
0% 2 2.38 2.0950 0.1400 16.96
4% 2.38 2.0838 0.1456 16.31 The WALL thickness i
6% 2.38 2.0782 0.1484 16.00 Driscopipe - The WAL
0% 4 4.50 3.9700 0.2650 16.98
4% 4.50 3.9488 0.2756 16.33 The WALL thickness i
6% 4.50 3.9382 0.2809 16.02 Driscopipe - The WAL
-
8/22/2019 pipe dims
5/13
0% 14 14.00 12.3520 0.8240 16.99
4% 14.00 12.2861 0.85696 16.34 The WALL thickness i
6% 14.00 12.2531 0.87344 16.03 Driscopipe - The WAL
0% 16 16.00 14.1180 0.9410 17.00
4% 16.00 14.0427 0.97864 16.35 The WALL thickness i6% 16.00 14.0051 0.99746 16.04 Driscopipe - The WAL
0% 18 18.00 15.8820 1.0590 17.00
4% 18.00 15.7973 1.10136 16.34 The WALL thickness i
6% 18.00 15.7549 1.12254 16.04 Driscopipe - The WAL
0% 24 24.00 21.1760 1.4120 17.00
4% 24.00 21.0630 1.46848 16.34 The WALL thickness i
6% 24.00 21.0066 1.49672 16.04 Driscopipe - The WAL
0% 32 32.00 28.2360 1.8820 17.00
4% 32.00 28.0854 1.95728 16.35 The WALL thickness i6% 32.00 28.0102 1.99492 16.04 Driscopipe - The WAL
21 36 32.5720 1.714 21.00
36 32.4349 1.78256 20.20 The WALL thickness i
driscopipe formula to find id to use for fluid flow:
id = od - 2,12 * (od/dr)
for 10" sdr 17 pipe this gives:
9.409411765
0% 36 36.00 31.7640 2.1180 17.00
4% 36.00 31.5946 2.20272 16.34 The WALL thickness i
6% 36.00 31.5098 2.24508 16.04 Driscopipe - The WAL
Pipe weights are calculated in accordance with PPI TR-7. Average inside diameter calculated using nomi
OD and minimum wall plus 6% for use in estimating fluid flows. Actual ID will vary. When designing com
to fit the pipe ID, refer to pipe dimensions and tolerances in applicable pipe specifications. Manual for Ch
-
8/22/2019 pipe dims
6/13
17
100 psi
2 2.375 2.0950 0.1400 16.96
2.375 2.0838 0.1456 16.31 The WALL thickness i
2.375 2.0782 0.1484 16.00 Driscopipe - The WAL
1.06
3 3.5 3.0880 0.2060 16.99
3.5 3.0715 0.21424 16.34 The WALL thickness i
3.5 3.0633 0.21836 16.03 Driscopipe - The WAL
1.06
4 4.5 3.9700 0.2650 16.98
4.5 3.9488 0.2756 16.33 The WALL thickness i
4.5 3.9382 0.2809 16.02 Driscopipe - The WAL
1.06
0% 6 6.625 5.8450 0.3900 16.99
4% 6.625 5.8138 0.4056 16.33 The WALL The WALL6% 6.625 5.7982 0.4134 16.03 Driscopipe Driscopipe
1.06
-
8/22/2019 pipe dims
7/13
OWANCE ON WALL THICKNESS DIPS sizes:
7.0550 0.7850 10.99
5.4200 0.6025 11.00
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
-
8/22/2019 pipe dims
8/13
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
inal Pressure Ratings are for water at 73.4 F. For other fluid and
onents service temperature, ratings may differ. Refer to Engineering
emical and Environmental Considerations.
-
8/22/2019 pipe dims
9/13
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.
L thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
thickness is calculated as the minimum WALL plus 4%, rounded to the nearest 0.001 inch.- The WALL thickness is calculated as the minimum WALL plus 6%, rounded to the nearest 0.001 inch.
-
8/22/2019 pipe dims
10/13
Nominal
pe
ze
(inches) mm mm mm mm
n n n n
1.25 1.73 2.42
- . - . - .
1.66 2.24 3.03
- . - . - .
1.66 2.32 3.2
-0.065 -0.091 -0.126
1.65 2.11 2.77 3.74
- . - . - . - .
1.65 2.11 2.87 3.92
- . - . - . - .
1.65 2.77 3.38 4.55
- . - . . - .
1.65 2.77 3.56 4.86- . - . . - .
1.65 2.77 3.69 5.08
-0.065 -0.109 0.145 -0.2
1.65 2.77 3.92 5.54
- . - . . - .
2.11 3.05 5.16 7.01
- . - . . - .
2.11 3.05 5.49 7.62
- . - . . - .
2.11 3.05 5.74 8.08
- . - . . - .2.11 3.05 6.02 8.56
-0.083 -0.12 0.237 -0.337
2.77 3.41 6.56 9.53
- . - . . - .
2.77 3.41 7.12 10.98
- . - . - . - .
2.77 3.76 8.18 12.7
- . - . - . - .
3.41 4.2 9.28 12.7
- . - . - . - .
3.97 4.58 9.53 12.7-0.156 -0.18 -0.375 -0.5
IDs
10 10.482 10.42 10.02 9.75
12 12.438 12.39 12 11.75
36.1 73.912 323.9 12.75 31.3
10 273.1 10.75 22.7 27.8 60.4
8 219.1 8.625 14.8
11.6 21.85.563 9.46
20 42.5
6 168.3 6.625 11.3 13.9 28.3
5 141.3
4 114.3 4.5 5.84 8.37 16.1
3.5 101.6 4 5.18
5.26 8.642.875 3.69
7.41 13.6
3 88.9 3.5 4.52 6.46 11.3
2.5 73
2 60.3 2.375 2.4 3.93 5.45
1.5 48.3 1.9 1.91
2.09 2.51.315 1.3
3.11 4.06
1.25 42.2 1.66 1.66 2.69 3.39
1 33.4
1.27
40606 26.7 1.05 1.02 1.28 1.68
40545 21.3 0.84 0.81
- 0.63
1
0.8540610 17.2 0.675 -
- 0.49 0.6340547 13.7 0.54 -
- 0.28 0.3740551 10.3 0.405 -
(mm) (inches)
Wall Thickness and Weight
kg/m kg/m kg/m
Outside
Diameter
Schedule
5S 10S 40S 80
http://www.engineeringtoolbox.com/pipe-schedules-d_557.html -
8/22/2019 pipe dims
11/13
convert mm to inch 1mm = 0.03937 in
mm in210 8.26772
18 0.70866
250 9.84252
22 0.86614
180 7.08661
18 0.70866
220 8.66142
20 0.7874
DN US
100 114.3 4.5 4.5 http://www.
125 139.7 5.5 5.563
-
8/22/2019 pipe dims
12/13
ID OD ft Rod ft c.l. to inv od in ID
Sch40 Sch40 Sch40
inch inch
1.61 0.15833 0.07917 0.06708 0.625 1 10/16 1 14/16
0.06708 0.875
2.067 0.19792 0.09896 0.08613
0.08613
3.068 0.29167 0.14583 0.12783 3 1/16
3.548 0.33333 0.16667 0.147834.974 sch40
4.026 0.375 0.1875 0.16775 3.826 ach80
5.047 0.46358 0.23179 0.21029
6.065 sch40
5.761 ach80
7.981 sch40
7.625 ach80
97.4
64.6
81.5
31
42.6
18.6
22.3
11.4
15.3
5.41
7.49
3.24
4.47
1.62
2.2
1.1
0.8
0.47
kg/m
S
-
8/22/2019 pipe dims
13/13
tubesolution.com/standard/DIN/DIN%202460.pdf