Pile Driving Rig PMx20 - Junttan · 2016. 4. 14. · PMx20 – Pile Driving Rig General Information...
Transcript of Pile Driving Rig PMx20 - Junttan · 2016. 4. 14. · PMx20 – Pile Driving Rig General Information...
DATA SHEETOriginalJunttanproduct
Pile Driving Rig
PMx20
PMx20 – Pile Driving Rig
General Information
Junttan PMx20 is a compact piling rig for driving timber, steel and concrete piles. It is an excellent combination of lightweight construction
and the capacity for heavy duty pile driving. The recommended hammer ram weight is from 3 000 to 5 000 kg and the maximum pile length
with SHK 100-3/4 hammer is 20 meters (~66 ft). The rig has proven productivity due to excellent mobility. The telescopic leader ensures easy
and fast handling of piles. Top pile driving performance is guaranteed with Junttan hydraulic hammers. An optional side drill or vibrator hammer
makes pile driving even more efficient in some soil conditions. With optional Junttan equipment, optimised working set-up of the rig can be easily
achieved.
This Junttan piling rig has the same proven features as the bigger Junttan machines. Its rugged design makes it a safe and reliable rig even in the
most demanding working conditions. The selferecting leader and many advanced technical features ensure that the rig is ready to work in just
a few minutes. The ergonomic and safety tested cabin allows the driver to concentrate completely on his work. The expandable tracks and low
centre of gravity make the rig exceptionally stable in different working situations. The horizontal movement of the leader ensures fast spotting
of the pile. Because of the lightweight construction and size, the rig can be easily transported to a new working site.
* Pile length depends on the hammer. See the table of hydraulic hammers beside.
PMx20 with longest available leader configuration (Hydraulic Impact Hammer SHK100-5)
PMx20 – Pile Driving Rig
Technical Data
* Contact Junttan sales for all available options and accessories
* Side cathead * iPiler PCD
* Side auger JD1,5/JD3 * Arctic kit (Fuel heater for engine, batteries and hydraulic oil)
* Rear support legs * Tropical kit (Bigger coolers for hydraulic oil (2x35kW/dT=30degC))
* Automatic lubrication system * Leader hinge
Accessories
Type JH47138
Crawler length 4 700 mm 185 in
Crawler type D57
Width (900 shoes) Min: 3 200 mm 126 in
Max: 4 700 mm 185 in
Track shoe options Width: 800/900/1 000 mm 31½/35½/39½ in
Surface: 3-edge / flat edges / flat
Edge type: normal / chamfer / bended
Undercarriage
Type Telescopic PMx20
Movements Telescope 4 000 mm 158 in
Foot (up/down) 1 000/500 mm 40/20 in
Horizontal 1 500 mm 59 in
Inclinations According separate capacity tables Electronic inclinometer included
Leader
Type PMx20
Engine Type: Cummins QSB6,7 EU Stage IV/US EPA Tier 4F
Power: 224 kW 300 hp
Fuel tank: 550 liters 145 gal
Hydraulic system Max flow: 2x214+(LS)120 lpm/2 000rpm 2x57 + 32 gpm/2 000rpm
Max pressure: 350 bar 5 076 psi
Cooling cap.: 2x25kW (dT=30degC)
Oil tank: 600 liters 159 gal
Control system Junttan X control system
Slew drive Single drive, 1 380 mm single row slewing ring
Counterweight Fixed: 5 500 (+ 2 000) kg 12 100 + 4 400 lb
Extendable 5 500 kg 12 100 lb
Cabin Air conditioned safety cabin
Uppercarriage
Nominal operational weight 55 000 kg 120 000 lb
Leader capacity 13 000 kg 28 700 lb
Winch capacity Pile: 8 000 kg 17 600 lb
Hammer: 11 000 kg 24 300 lb
Auxiliary: 3 000 kg 6 500 lb
Recommended hammer type SHK 100-3 – SHK 100-5
Maximum pile length (SHK 100-3/4) 20 m 66 ft
Basic features
Transport Dimension
Junttan Oy reserves the right to amend the specification without prior notice. Error and misprints reserved. 03/2016
PMx20 transport dimensions with longest available leader configuration (Hydraulic Impact Hammer SHK100-5).
Optional leader hinge available
Minimum track width.
Junttan OyP.O. Box 1702 (Matkuksentie 7)FI–70701 KUOPIO, Finland
Tel. +358 10 195 221Fax +358 17 287 [email protected]