Pieter Venter CV
-
Upload
pieter-venter -
Category
Documents
-
view
39 -
download
0
Transcript of Pieter Venter CV
Curriculum Vitae
- Project Quality Assurance / Quality Control
- Quality Management
- Senior Welding and Fabrication Inspector
(SAIW Level 2 and IIW Standard)
Pieter A Venter Contact number: +27 82 309 2387/+27 71 366 2094 Email: [email protected]
LinkedIn URL: za.linkedin.com/in/pive1985
CARRIER SUMMARY
To work in Challenging environment, demanding all my skill and efforts to explore and adapt myself in different
fields, and realize my potential and contribute to the development of organization with impressive performance.
AREAS OF EXPERTISE
Maintaining Quality Management Systems in all aspects as applicable to the works
Quality Management
Compiling and maintaining Quality Dossiers, as per Contract requirements
Liaising with the Customers and Sub Contractors for Quality and Technical issues
NCR’s and Investigations
Site Work Inspections
Company Quality representative
Maintaining Effective control of Documents and Correspondence
Inspection & Supervision
Factory/ Site Acceptance Testing
Visual Inspections and Reporting
Off- Site Inspection and Reporting
Reading of Drawings
Witnessing of Processes
ISO 9001 Implementation and Auditing
Quality Assurance (ISO 3834 Part 1& 2, ISO 1473 and ASME 8 Div.1–App 10, UG- 80, 99, 102, UW 33, 35)
Knowledgeable in ASME codes, Procedures and Requirements
Extensive experience in AWS D1.1 Structural Steel Code
BS & UN Codes
SANS Codes
Pre and Post Weld Heat Treatment (AWSD1.1, BS2633, PD5500, ISO1011 and ASME8)
Welder Testing (Performance Qualifications – AWS D1.1 – BS EN 15614 ISO 15608 ASME 9)
Welding procedure Qualifications (AWS D1.1, BS EN 15614 ISO 15608 ASME 9)
Welding Safety
Fabrications, Mechanical and Electrical Installations
Non Destructive Testing (PT, MPI, RT, UT)
Destructive testing
All Welding Processes (Extensive Experience)
Site management
COMPUTER SKILLS
Microsoft Word & Excel
Microsoft Outlook and Lotus Notes
Internet
Power Point
TRADE QUALIFICATIONS AND CERTIFICATION:
All Certificates available on request
- International Welding Inspector (Done at SAIW 2016)
- Senior Welding Inspector Level 2 (Done at SAIW 2016)
- Welding Inspectors Level 1 (Done at SAIW 2011)
- Trade Test (Welder Red Seal done at Olifantsfontein 2006)
- ISO 9001 Implementation (TÜV Rheinland)
- ISO 9001 Internal Auditor (TÜV Rheinland)
- Grade 10 (HTS Sasolburg 2003)
OTHER COURSES ATTENDED
- Working at Heights Safety Course (Spanset) & Rescuer Course - Safe use of Gas Cylinders - Basic Fire and Safety Course - Abrasive Wheels Course - Course on the Wearing Requirements of a Safety Harness - Course on the Safe use, Storage and Maintenance and Visual Inspection of Steps and Ladders - Manual Handling - Workplace Health and Safety Representatives - Flour Training Centre Competent Certificates (Tig, Mig and Stick Welding) - Safe Guarding
CONTACTIBLE REFFRENSES
Company Name Position Contact Number
ABB South Africa Leon De Clerq Project Manager + 27 72 507 7202
Charl van Tonder Site Manger + 27 82 783 9827
Eskom John Behn Project Engineer + 27 83 410 3636
Concor Engineering Sydney Waddell Construction Manager + 27 82 679 2394
Hitachi Zambia Ockie Barnard Project Manager + 26 097 541 726
Joy mining (GLC) Cobus Stenekamp General Manger + 27 83 628 4954
BHP Billiton Metalloys Bernie Pieters Mechanical Foreman + 27 79 776 8139
PERSONAL ATTRIBUTES
Good leadership, coordination and organizational skills, dependable, conscious and highly motivated person
Tolerant and cheerful person Highly disciplined and possess a sense of integrity
Strong analytical and creativity skills Ability to work independently or within a team with
very strong team building skills Ability to work under pressure Emotionally and Physically stable
PERSONAL INFO
Date of birth: 4th February 1985 in South Africa
Location: Sasolburg, currently working in Ladysmith (Willing to Relocate Local or International)
Languages: Afrikaans and English (Read, Write and Speak)
Driver license: A & EC with Permits (Code 14)
EMPLOYMENT HISTORY
ABB South Africa
Eskom Ingula Site, South Africa
Project QA /QC Inspector
Electrical, Mechanical and Fabrication Installations (Power Station)
May 2013 – Present
Managing QA/QC on Site as well as Off-site overseeing all Sub-contractors. Compiling and updating Data
packs and QCP`s, Review of Welder Qualifications, Welding Procedures and NDT certificates for compliance.
Punch and sign of all work (Civil, Mechanical, Welding and Electrical). Problem Solving, Assisting Production in
Quality issues and Non-conformances. Final Inspections and hand-over to Client (All Data packs). Ensure
conformance to ISO 9001. Support Site and Project manager. Interaction with Client to resolve any issues and
speed up production. This includes the Installation of MV Switchgear, LV Switchgear, Transformers as well as
Dry Type Transformers, Diesel Generators, DC Switchgear and Cable and Racking Installation (FAT,
Installation and SAT). Document control. Creating and Implementation of new QA Systems when required.
Concor Engineering Sasol 1
Sasolburg, South Africa
Project QA /QC Inspector
Petrochemical
March 2012 to April 2013
Generating of all ITP'S (Inspection and Test plans) where needed for each new area of work. Compile Data
packs for each area of work. Updating of Data packs as the work progresses. Inspection of Quality of
workmanship. Weekly Inspections on all drawings to ensure that correct revisions are used (Supervisors and
Foremen). Site Inspections on all work performed when requested from the Foreman. Generate survey request
forms for Surveyors to control the requests made by the Foreman. Final Inspections and hand-over to Client
(All Data packs). Document control. Creating and Implementation of new QA Systems when required. Ensuring
all Welder Qualifications are up to date as well as all Welder Procedure Specifications. Final inspection on all
site welding.
AVENG Grinaker-LTA
Vanderbijlpark, South Africa
QC Inspector
Heavy Engineering Fabrications
Check fit-ups prior to welding. Inspect completed welds. Flagging of welds for NDE selection. Receiving and
checking of NDE reports. Compile Data packs (shop packs) and sign final pack. Generation of Technical Site
queries to the relevant Engineers and follow-up these queries to ensure the correct actions to be taken.
Weekly Inspections on all drawings to ensure that correct revisions are used (Supervisors and Foremen)
Inspection of final product.
Joy mining (Global Lifting Machinery Company)
Wadeville, South Africa
Welding Supervisor & QC Inspector
This was mainly fabrication work and steel erections
August 2011 to December 2011(Temporary position)
Hitachi Zambia
Lumwana, Zambia
Boilermaking and Welding Supervisor
10 May 2010 to 31 July 2011
Supervising team of 15-20 expatriate welders and boilermakers as well as local artisans. All HR related issues.
Implementing new systems and training as well as to maintain these systems. All welding Inspections required
on Site. To do all the planning within the department
To ensure all boiler making and welding targets is achieved safely. This is in the Maintenance and Fabrication
sector. To ensure all consumables and parts are available on site. To ensure a high level of availability on all
equipment. To ensure all fabrications are done to standard. To keep in the given time frames.
Joy Mining (Global Lifting Machinery Company)
Wadeville South Africa
Welding Supervisor & QC Inspector
This was mainly Fabrication work and Steel erections
25 March 2009 to 15 April 2010
BHP Billiton Metalloys
Meyerton, South Africa
Coded Welder & Maintenance Boilermaker (Leading hand)
This was Projects and maintenance on the Smelter
1 November 2005 to 5 March 2009
Azam Engineering
Meyerton, South Africa
Coded Welder & Maintenance Boilermaker
Workshop Fabrication and Piping
16 August 2005 to 31 October 2005
Apollo Construction
Secunda, South Africa
Boilermaker
Site Fabrication on Petrochemical Plant
18 April 2005 to 20 July 2005
GS Marketing
Barway, England
Welder
Workshop and Maintenance on Rigs
15 January 2004 to 28 February 2005
Should you require more information please request via email?
OBJECTIVES
To complete my studies in Inspections and further my education in Quality.