PIEAS M.S 2014 Questions

8/16/2019 PIEAS M.S 2014 Questions

1/11

By: Muhammad Sarwar-10EL20 |1| [email protected]

PIEAS M.S Test 2014 Questions

General Part:

English:

1) What is the meaning of Protégé? (From comprehension)

2) Why is it difficult to evaluate real benefits of a mentor to a Protégé? (From

comprehension)

3) What is antonym of fast?

4) As an adjective, what is meaning of Intimate?

5)

What is synonym of Continue?

6)

He was in the swimming pool and calling for help but no one came!

What is active verb in the sentence?7)

_________, I can give my extra time for humanitarian cause. (As for me, as

from me, as to me)

8)

He got the job as he is like a cat who ate the _________. (mouse, rat, bug,

canary)

9)

We solved the problem ________________ a new device. (by means for, be

means with, by means of)

10) Everyone disliked his _____________ to the President (illusion, allusion,

elusion)

Physics:

11)

Light with energy E is incident upon a surface area (A) per unit time (T).

Simplify the units for E/(A*t).

12)

What is energy of a 600 nm red light photon?

13) What is orbital speed of a satellite at the height of 8000 km above earth

where value of g=6.2 m/s2?

14)

What is the angle between equipotential lines and electric field lines?

(parallel, orthogonal, acute, obtuse)

15)

U23592 absorbs a neutron and emits two β particles. What will be the daughter

element?

16)

What quantity does change when a light ray reflects from a mirror

(frequency, wavelength, speed, phase)


2/11


17)

Divergence of y2i + xz2 j +2xk .

18)

If a light ray propagates in direction of x-axis. In which plane is movement of

its electric field? (Y-axis, X-axis, XY plane, YZ plane)

19)

The transverse wave nature of light is confirmed by which phenomenon

(interference, diffraction, polarization, refraction)

20) What is the best approximate for diameter of alpha particle (10-9,10-10, 10-12,

10-11)

21) What differs in two isotopes of an element (electrons, protons, neutrons,

shells)

22)

What changes by increasing voltage on electrodes of X-ray tube (Speed,

frequency, no. of emitted photons, Energy)

23)

Resistivity, length and resistance of a resistance are given, find the diameter

of the wire.

24)

A 450C temperature change corresponds to a change in 0F (128, 113, 450,

145)

25)

Conductivity in metals depends upon (electrons, ions, molecules)

26)

A spring with a constant ‘k’ is cut into three equal parts, what is the spring

constant of newly formed parts? (k/3, 3k, k, None)

Mathematics:

27)

Cos(1+2i)=?

28) +−

=? (i, 1, -1, -i )

29)

Find Eigen values of a given 3*3 matrix.

(This question repeats almost each year)

30) What maximum volume rectangle can be formed by a rectangular piece of

21*16 inch by cutting a square piece from each corner? What is area of that

square?

31)

A drum contains 100 gallons of salt solution with 1 lb/gallon salt. If 2 lb/gallonsolution is added at the rate of 5 gallons/min and stirred uniformly and

solution is ejected out at the same rate. What time will it require to reach

150 lb salt in solution?

32)

If f(x,y) = ex. Sin(xy) the what is the relation b/w and


3/11


33)

Evaluate

((√ (2 6)) )

34) What is integrating factor in y’ + y/x = ex

35) How many word can be formed by letters of ALLANAMOPIA with no two A’s

adjacent to each other.36)

.

. ⋯

(+)

(+) ⋯ The given series is (divergent, in-

determinate, convergent, power series)

37)

Pressure at the sea level is 100 kPa. Water density is 1020 kg/m3. At what

depth the pressure will be 110 kPa. (11m, 10m, 9.8m, 1m)

38)

A function f(x,y)={(1,x), (2,y), (3,x), (4,y)} is a (an) (Surjective, bijective, 1-1,

onto) function.

39) What is the surface area of a unit cube?

40) Value of a variable k was to be found in terms of pi in a math question.

Subject Part (Electrical/Electronics):

Power:

41)

= ? (load factor, diversity factor,

plant factor)

42) Potential at the ends of a transmission line is 132 kV, reactance of line is 50

ohm. What is approximate loading capacity of line?

43) Breakdown voltage strength of air depends upon (voltage applied, air

density, humidity, all of these)

44) Receiving and sending end voltage at the ends of a short transmission line

are 120


4/11


49)

What is the effect of increasing rotor resistance on torque of 3 phase wound

rotor induction motor? (increases, decreases, remains same, none)

Controls & Communication Systems:

50)

For a stable system, what should be values of phase & gain margins

(opposite, both positive, PM –ve & gain margin +ve, both are same)

51)

Y=6.x(t)+4 Is this system Linear & time invariant?

52)

The phenomena of Coding and Width allocation is associated with (PAM,

PCM, PWM, PPM)

53) Find inverse Laplace of(−)

(−+)

54)

Fourier transform of an even periodic function contains (sine components,

cosine components, both, none of them).55)

x[n] and x[n-1], their Fourier Magnitude & Phase Plots are same or different?

56)

A carrier of 2 kHz modulates a signal with frequency deviation 5 kHz, what’s

the frequency of modulated signal?

57) What is hamming distance between two binary numbers (011011 &

110001)? (3,2,1,4)

Electronics, Electronic Circuits and Components:

58)

A JFET amplifier was shown with values given and its output voltage was to

be determined for given input.59)

What happens to the value of Gain-Band width product of an op-amp when

provided with negative feedback? (increase, decrease, remains constant)

60) Data regarding an Op-amp was given and was asked to determine its slew

rate.

61) Gd = 400 and … (This question is related to JFET and was calculation based,

don’t remember the whole question, I think a diagram was also provided)

62)

A circuit with a biased JFET was shown and was asked to determine the input

impedance of the amplifier.

Basic Electrical Engineering, (Electric circuits, Electric and

Magnetic Field Theory and applications, Digital Logic)

63)

What is the minimum number of variable components required to balance

an AC bridge? (4, 2, 1, 3)


5/11


64)

To implement the system Y=∑(1,3,4,5,6,7,11,14) what single multiplexerwould be enough: (4-1, 12-1, 8-1, 16-1)

65)

= 0 is called? (Laplace eq, Poisson eq, Bernoulli eq,

Maxwell eq)

66)

The type of amplifier that can be used to amplify signal from a bridge circuit?

(Inverting, non-inverting, tuning, instrumentation)

67)

A voltage source of 20 V with internal resistance 1.5 ohm provides power to

a 6.5 ohm load resistance. How much power is provided to load resistance?

68)

An inductor stores 300 kVar power, quality factor of inductor is 300. What

are real power losses of inductor?

69)

In an R-L circuit, inductor stores 1000 J energy, and resistor dissipates 2000

W power. What is time constant of the circuit?

70) A circuit was shown and effect of adding a new resistor (using switch) was to

be determined on the brightness of the lamp.

71) For a full wave bridge rectifier, load current is 10 A and peak to peak ripple

voltage is 20 V. What should be the value of repetitive current for diodes in

the bridge?

72)

For an ammeter with Rm = 100 ohm, Ifsd = 100 mA, what should be the value

of shunt resistance to measure a full scale deflection current of 5A?

73)

A 2nd order RLC circuit was shown and voltage across capacitor was to be

calculated?

74)

For the same circuit, a switch was closed at t=0, and current through inductor

was to be found immediately after closing the switch.

75)

A balanced delta impedance of 60+j45 is equivalent to what value of

equivalent star connected load?

76) A two port network was shown and wrong value of Z (Impedance) parameter

was to be sorted out of given values.77) A four bit adder circuit adds two numbers A3A2A1A0 and B3B2B1B0 what is the

logic expression for Carry output of First Bit?

78)

What will be the logic expression for the decision of four judges to select a

candidate? The candidate selected on the basis +ve selection response from

maximum number of judges. The input for Judges are W, X, Y and Z.


6/11


79)

What will the response of a system with just a single pole at origin

(oscillatory, constant, exponential, sinusoidal)

80)

What is the value of damping factor for an over damped system? [Doubtful

Qs.]


7/11


I could remember only 80 questions out of 100. If anyone who appeared in the

test does have any more questions not included above, send them to me! The

question order is jumbled, the questions of Subject Part weren’t classified in sub-

categories in the actual test.

So, how was the test? Seemed a little difficult to me at very first. Some

questions were knavish, many were irrelevant to Power Engineering and no doubt

some were easy too! But overall test was satisfactory (to many) including the

General Portion. If you can attempt ~40% questions right now, you’re expected to

attempt 75%+ questions with proper preparation.

More than 60% questions are numerical types and calculation based that’s

why a non-programmable scientific calculator is allowed in the test (The calculator

is much helpful in the test, much more than you imagine, bring an originalscientific calculator with natural display, download its user manual from its site

and read the complete manual, the one/two hour(s) you spend on reading the

calculator manual will help you save time and earn extra marks during the test).

I solved about 4-5 questions using advanced natural display calculator which I

couldn’t have solved with a simple scientific calculator or if solved with simple

scientific calculator would have taken me twice or thrice more time!

What to prepare for the test? Preparing irrelevant subject matter for years

will have no practicable effect on your test results. Try to be focused, prepare well,and try to avoid far-flung rote learning. Here are the outline of the Test as supplied

by PIEAS:

The question paper is divided into two parts i.e. Part (A) and (B). There will

be 50 questions in Part (A) and 50 Questions in Part (B). Part (A) is the general part

to be attempted by all the candidates (except MBBS/Medical Sciences students)

whereas Part (B) is the subject part having subject papers. Only the subject paper

relevant to the candidate’s academic background may be attempted by the

candidate. The candidate should mention the subject paper he/she is attemptingby filling the appropriate section of the answer sheet. The maximum time allowed

is 3 hours. Each question carries 3 marks and 1 mark will be deducted for a wrong

answer.

A.

General Part:

i.

It consists of three fields namely Mathematics, Physics and English.


8/11


ii.

General Part must be attempted by all the candidates

iii.

General Part will have 50 questions in all. 20 from Mathematics &

Physics respectively and 10 from English

a)

Mathematics (Level F.Sc and B.Sc)

Topics: Basic Calculus, Differential Equations, Complex Variables,

Boolean Algebra, Vector Algebra, Matrices, Statistics

b)

Physics (Level F.Sc and B.Sc)

c)

English

B. Subject Part: It consists of 50 question from

Electrical/Electronics/Telecommunication in the following proportion:

Electrical/Electronics/Telecommunication

RELATED TOPICS SHARE (Approx.)

Basic Electrical Engineering, (Electric circuits, Electric andMagnetic Field Theory and applications, Digital Logic)

45%

Electronics, Electronic Circuits and Components 20%

Controls and Communications Systems 15%

Power (Machines, Distribution, Generation, Transmission,

Protection, Power System Analysis, Power Electronics)20%

General Part Preparation:

Mathematics: Prepare F.Sc Part 1 maths: Ch. 1 to Ch. 7 (Skip Trigonometry

& 8th chapter). Each chapter is equally important and keep in mind that Test is

numerical based. Memorize formulas and work out with calculations.

From F.Sc Part 2 Maths: Skip Ch. 5 and prepare remaining all 6 chapters (you may

skip Ch. No. 6 too, but it’s better to prepare some basics of 6th chapter). Pay special

attention to Ch. 2 & 3. Though each chapter shares equal importance in test, one

or two questions are included from each chapter roughly.

Physics: Go through all the chapter of Physics F.Sc Part 1 and Part 2 books.

Learn all the formulas and be good with calculations. Last 3,4 chapters of 2nd

yearPhysics are important.

English: English has nothing to prepare, because no specified course can be

allotted for English preparation. This is the first portion of the General test

consisting of 10 questions. 1st two are from comprehension, so they are easy. Next

3-4 are synonyms & antonyms, they’re easy too but confusing, tick them carefully.


9/11


And remaining questions are correct form of verbs, prepositions or correction of

grammar mistakes.

Subject Preparation:

Basic Electrical Engineering: Revise Circuit Analysis I & II from David Irwin’sbook or any other Basic Circuit Analysis book (1st order & 2nd order circuits are

important). Review EMT from William H. Hayt’s Book or Alexander Sadiko’s. Learn

all basic equations (i.e. Maxwell’s, Poisson, Laplace, Ampere, Green/Stokes

Theorems etc.). Have a basic review of DLD book by Thomas L. Floyd . Pay special

attention to combinational logic circuits (They’re important). Have an insight of

sequential logic. You may skip K-maps and other lengthy portions.

Electronics, Electronic Circuits and Components: For this portion, prepare

thoroughly Electronic Circuit & Devices by Robert T. Paynter or Thomas Floyd’s

Electronic Devices. FET, JFET and MOSFET’s components, circuits, biasing and

analysis is REALLY important. Learn them by heart (in fact brain :P).

Controls and Communications Systems: For control systems, review Control

System by Norman S. Nice. (Samarajit Ghosh’s book is not up to standard). Revise

basics of Open loop & Feedback Control systems. Stable & Un-Stable system

conditions, poles-zeros plots, bode plots, frequency response, Phase margin, gain

margin, root locus and all basic relevant topics.

Communication Systems: (Advance topics from this portion are asked in test)

Prepare Laplace & Fourier transforms (important). Harmonics, AM & FM

modulation techniques, Slew rate, Fourier magnitude & phase plots, filters (IIR &

FIR). You may refer to Modern Digital & Analog Communication Systems by B. P.

Lathi. Also review topics from Signal & Systems and DSP. Prepare basics (i.e. LTI

systems, signals & their properties, convolution, Fourier series & transform plots of

a signal etc.)

Power: Prepare AC & DC machines from chapman. Revise selective topics ofPower Engineering from Principals of Power Systems by V.K Mehta. Power

calculations are very important (i.e. finding base values, Impedances, Real &

Reactive power flowing through a circuit, capacitance & inductance values). Revise

Power generation too (it’s important). Also revise Power Electronics topics


10/11


especially for SCR, IGBT, MOSFET, BJT, DIODES, TRIACS & DIACS; their properties,

construction, circuits & applications.

This is the complete course outline for M.S fellowship test. But you must prepare

more than that mentioned above in order to succeed. By carefully observing the

2014 test questions, you may find out the exact (But up to a limited accuracy) topics

to prepare for a specific subject for coming year’s test. For example from Circuit

Analysis, questions of Series Parallel combination of Resistors, 1st order & 2nd order

circuits, Maximum Power transfer theorem, Basic Current/Voltage division, KCL,

KVL are much important because questions related to these topics have been found

in Fellowship tests. For instance, at least 3 questions were related to FET, JFET, &

MOSFET as listed in above questions, so this is most important topic! Same is true

for Op-Amp.

Carefully read the sample paper; also search Internet for past papers for

PIEAS B.S and M.S fellowship tests (2010, 2011, 2012 & 2013; 2014 is given above).

At least 3-4 questions (or may more) are from past papers. And many more or

related to past paper questions with just small changes in values etc.!

How much time should you allot for test preparation? The answer to this

question is quite important for an aspirant candidate to succeed. The time you set

aside for your test preparation depends on a number of factors; you have to ask a

couple of questions to yourself:

What is you previous Knowledge Level about the subject(s)?

Are you starting from scratch?

Do you plan to revise only or to read the topics thoroughly?

What is your intelligence level?

How much are you eager to learn?

What is your Method of Revision?

So, scrutinize each subject and its sub-topics according to PreviousKnowledge, Type of Revision etc. and you may be able to allocate specific time for

each subject. Manage your time well and you may be able to revise a lot of material

in shorter time span! :) For just to take an example, I completed my revision in 4-5

days from 04 June, 2014 to 08 June, 2014. I revised only F.Sc Maths and Physics

books, because I had left with no time for Subject Preparation (as 8th semester’s


11/11


finals started from 10th June). Then I got one and half day more after 2nd paper of

finals. I again reviewed Maths & Physics one time and looked upon some topics

from engineering subjects. That was all of my preparations!

Attempting a MCQs based test is itself an art. Mastering that art with a

proper commingle of preparation will get you through any test. You’ve 3 hours and

100 MCQs; spend each second of available time wisely. In the first round, attempt

only easiest question which you can solve in less than 30 seconds. Then in the next

round try moderate questions. And in the last, attack the Hard questions, answer

those which you can easily solve, don’t spend a lot of time on a single questions.

Use your Brain & Calculator collectively.

While attempting questions in the test, beware of the –ve marking, don’t

attempt a question unless you’re completely sure for the correct answer. Neveranswer a question by mere random guessing. If you don’t know an answer to

question, use educated guesses that may increase your chance for guessing a

correct answer.

Read the question and its answer choices carefully, now relate each answer

choice to the question and find the chances for this choice to be a correct answer.

Use the techniques of reverse solving, inference from other option, use analogies

and make a decision that the choice being considered can be an answer or not.

Similarly, work out all the option choices and each time roll out the choice whichhas no (or relatively lesser) chance to be a correct answer and this way you may

increase the probability for guessing a correct answer.

If 4 multiple choices are given for a question then you have 25% (1/4)

probability of guessing a correct answer randomly. If you eliminate one choice then

you’ve 33% chance and if you eliminate two answer choices your correct guessing

chance rises up to 50% and so on.

I answered 98 questions. About 15 of them were educated guesses, 70+ were

correct (according to me), so I expect to get 220+ marks out of 300. I think 200marks are enough for a candidate to be shortlisted for the interview!

PIEAS M.S 2014 Questions

Documents

Transcript of PIEAS M.S 2014 Questions