PICU Bed1020 V2

IVstand

Liftingpole

Urinebag

Waterresistant

Tractionbar

PICU

Bed

102

0 V2

Technical SpecificationsOverall dimensions .................... 1880 mm × 1085 mmMattress platform ........................ 1640 mm × 800 mmHi - Low .................................................. 950 mm - 650 mmSide rail height ............................... 410 mmBack rest angle ............................... 0 - 82º

Knee rest angle .............................. 0 - 32º

Trend. / Reverse Trend. ........... ± 12º

Bed weight ......................................... 147 kg

Safe working load .................................. 150 kg Casters (Central locking) ................. 150 mmPower input max. ................................... 250 VA Main power system ............................. 220 V – 50 Hz, 24V DCElectrical current protection ....... Class I Electrical shock protection ........... Type B Operation mode ..................................... 10%, max.: 2 min/18 minIP rating ........................................................... IP 66

Technical and Quality Assurance StandardsIEC 60601.- 2 -.52ISO 13485ISO 9001ISO 14971

Min

. hei

ght 6

50 m

m

Max

. hei

ght 9

50 m

m

Side rail height 410 mm

150 mm

Overall length 1880 mm

Overall width 1085 mm

Mattress platform length 1640 mm

Mattress platform width 800 mm

4544

Trendelenburg 12º

Back rest 0 - 82º

Max. height 950 mm

Min. height 650 mm Reverse Trend. 12º

Knee rest 0 - 32º

Cardiac chair

Positions

FeaturesBumperRotary bumpers that are located on four corners of the bed can prevent to a large extent the damages that may occur due to unwanted collision of the bed to the surroundings during transportation.

Casters150 mm central locking casters run extremely smoothly; the quality that makes it significantly easy for the nursing staff to move the bed. In addition, the foot pedals allow effortless transition between the three modes of the central locking system: safe central locking (down), easy maneuvering and positioning (middle), and fast directional movement (up) to provide a smooth and controlled single person transportation of the bed in the medical center.

Nurse Control PanelEasy to use Attendant Control Panel (ACP) with illustrative schematics located at the foot end of the bed provides all required positions including Trendelenburg and Reverse Trendelenburg.

Pendant ControlUser friendly handset control with illustrative schematics makes it simple and easy for the caregiver to adjust the bed with different positions. The pendant controller can be placed on both side rails for easy access.

Supplementary Side Rails In addition to the parallel side rails that adhere to the highest standards of patient’s safety, 1020 V2 is equipped with a pair of rotating supplementary side rails that enhances the safety and comfort of the patient.

Side Rails Locking MechanismsBoth safety side rails are equipped with innovative and easy to use locking mechanisms that allow the rails to be securely locked in upright position to maximize the patient’s safety. Pulling upward the locking handle, the caregiver can easily collapse the safety side rails.

Bed EndsThe seamless blow molded bed ends of 1020 V2 are lightweight, durable, and easy to clean. The bed ends are of high quality and compatible for steam cleaning. In order to have a better access to patient’s head in emergency cases, the caregiver can easily removes the bed ends by grasping the hand holds and lifting them up in one single step.Moreover, the bed ends have integrated steel fittings whichmake them extremely rigid; so the nursing staff can move the bed by holding and pushing them without worries.

ActuatorsAll positions of this bed are achieved by powerful, reliable, and low noise actuators. As the actuators have IP66 rating, they are protected against ingression of dust and water. This prominent feature of actuators makes it easy to clean and disinfect the bed in the medical centers on a regular basis.

Mattress PlatformsThe ABS mattress platforms of this pediatric bed have some remarkable features such as smooth surfaces, high durability, and easy to remove for cleaning and disinfection. Plus, the mattress platforms are compatible for steam cleaning.

4746

PICU

Bed

102

0 V2

CPR MechanismTwo CPR quick release handles arelocated on either side of the bed for easy and fast access in the case of an emergency. The manual quick release mechanism operates independently from the electrical CPR of the bed that makes it fully operational even if the power is cut off.