PICO384 Gen2TM · 2019-10-31 · The thermal image sensor, Pico384 Gen2, is designed to help...
Transcript of PICO384 Gen2TM · 2019-10-31 · The thermal image sensor, Pico384 Gen2, is designed to help...
Thermal Image Sensors
The thermal image sensor, Pico384 Gen2, is designed to help manufacturers penetrate mass thermal detection markets. This full-digital surface mount device is built on proven technology,
limit development costs and shortening time to market, helping manufacturers get simple-to-use and truly competitive end products to the market.
A SURFACE MOUNT DEVICE AND MUCH, MUCH MORE !
FIREFIGHTING
SURVEILLANCE
& UAV
LEISURE
THERMOGRAPHY
INCREDIBLE IMAGE QUALITY
SEAMLESS INTEGRATION
OPTIMIZED TOTAL COST OF OWNERSHIP
PICO384 Gen2TM
384 x 288 – 17 µm
LEISURE
THERMOGRAPHY
Thermal Image Sensors
A SURFACE MOUNT DEVICE AND MUCH, MUCH MORE !
PRODUCT NUMBER: PICO384-053
INCREDIBLE IMAGE QUALITY• Sharp contrast
Thermal sensitivity < 60 mK, (f / 1, 300K, 60Hz) [-40°C; +85°C] operating temperature range
• Fluid and smooth image Frame rate up to 60Hz Thermal time constant < 10 ms
• High uniformity Array operability > 99.8 %
“Capture even the tiniest details”
“Ready for high volume production”
OPTIMIZED TOTAL COST OF OWNERSHIP• Simplified image processing
Predictable behavior TECless, Shutterless compatible
• Battery optimization Low power consumption < 220 mW - 60Hz Digital mode
• Proven reliability Standards MIL810 - MIL883
“Designed for cost optimized
systems”
Specifications are subject to change
RÉF
. 03
/20
18
/02
- Pi
ctur
es: U
lis -
isto
ckph
oto
- Prin
ted
in F
ranc
e
PICO384 Gen2TM
384 x 288 – 17 µm
SEAMLESS INTEGRATION• Simplified electronic design
Full access to sensor features (I²C serial link) Free run or external trigger mode Full digital component
• High volume compliant Surface Mount Device (J-Lead44) JEDEC’s reflow and handling standards compatible
Recognition distances for human measuring 1.80 m x 0.50 m
1.8
0 m
0.50 m
18 mm lens(12°x 9°)
(8.8°x 6.6°)
(5.5°x 4°)
25 mm lens
40 mm lens
240 m
330 m
530 m
13 mm lens(28.2°x 21.3°)
(19.5°x 14.7°)
(11°x 8°)
19 mm lens
35 mm lens
120m
180m
330m
0.50m
1.8
0m
LYNRED HEADQUARTERSAvenue de la Vauve - CS 20018
91127 Palaiseau - FrancePhone +33 (0)1 60 92 18 30
DEVELOPMENT AND PRODUCTION CENTERActipole-CS 10021
364, route de Valence38113 Veurey-Voroize - France
Phone +33 (0)4 76 28 77 [email protected]
www.lynred.com